Hi, I am a happy owner of the HP Slate 7 Extreme which is basically the same device as you guys are using.I am still on the 4.2 Jelly bean since HP are not pushing over the air updates with our devices.I want to use the script from the development forum "[Script] [Utility] Nvidia Tegra Note 7 Kitkat Unlock BL, Restore, Recovery, & Root", I want to know if anyone has tried to use it with the Slate Extreme or if it simply should work on the Jelly Bean aswell. Thanks guys.
still have freeze/hang issue..
http://forum.xda-developers.com/showthread.php?t=2663449&page=2
mofared said:
still have freeze/hang issue..
http://forum.xda-developers.com/showthread.php?t=2663449&page=2
Click to expand...
Click to collapse
What about the 4.3+ ?
crazyhacker202 said:
What about the 4.3+ ?
Click to expand...
Click to collapse
i have not test that yet but i believe it should work because i have tested the 4.4.2 and 4.2.2 evga ROM from here using the cwm install from sdcard method..
http://forum.xda-developers.com/showthread.php?t=2627671
The only thing that puzzles me now is i am unable to perform a system recovery from HP update.zip using cwm.
http://h10025.www1.hp.com/ewfrf/wc/...en&cc=us&dlc=en&sw_lang=&product=6608632#N147
So right now i am stuck with 4.2.2 evga ROM all is good and functional.
I have read some post that by updating OTA fix issue in 4.4 but i have no idea on how to get the OTA update.
p/s: This is my first tablet and root attempt...
edit:
i found out that rootjunky has already released the 4.4.2 with 2.3 OTA i will give it a try and feedback later
mofared said:
i have not test that yet but i believe it should work because i have tested the 4.4.2 and 4.2.2 evga ROM from here using the cwm install from sdcard method..
http://forum.xda-developers.com/showthread.php?t=2627671
The only thing that puzzles me now is i am unable to perform a system recovery from HP update.zip using cwm.
http://h10025.www1.hp.com/ewfrf/wc/...en&cc=us&dlc=en&sw_lang=&product=6608632#N147
So right now i am stuck with 4.2.2 evga ROM all is good and functional.
I have read some post that by updating OTA fix issue in 4.4 but i have no idea on how to get the OTA update.
p/s: This is my first tablet and root attempt...
edit:
i found out that rootjunky has already released the 4.4.2 with 2.3 OTA i will give it a try and feedback later
Click to expand...
Click to collapse
First, nope, you'll still get freezing. I've tried all the ROMs.
Second, If you want to go back to HP's recovery, do the following:
Create a copy of update.zip and navigate to META-INF\com\google\android and open up updater-script
Delete the first three lines.
Transfer your new update.zip to your device and flash. Allow it to re-write the recovery partition.
NOTE THAT YOUR DEVICE WILL NOT ADVANCE PAST THE BOOT ANIMATION. THIS IS NORMAL.
Copy the original update.zip to a SD card and insert it into the device.
Now go to the HP recovery partition that now exists on your device and follow HP's restore instructions.
You're done, the stock 4.2.2 that came with your device is now installed.
Had to figure this out the hard way after I lost my original backup.
To the original poster, you can get it to work, but you need to make modifications to the script's fastboot commands (they will require "fastboot -i 0x03F0" before they will do anything) and you will need to setup your machine for ADB with the Slate 7 Extreme. It won't work out of the box, you can find support for that here: http://h30434.www3.hp.com/t5/Android-Tablets-e-g-HP-Slate-7/ADB-drivers/td-p/2574571
There was an individual who has received the 4.4.2 update from HP on his Slate Extreme over at the HP forums. I believe he stated he received 20 units donated directly from HP and was wondering why only 1 of them received the update. I believe the reason stated is that he most likely received a non-retail unit by accident. Not sure if he ever dumped the ROM or even knows how. I don't know either otherwise I'd try to contact him to get him to do so.
Re-write recovery partition?
Robo_Leader said:
First, nope, you'll still get freezing. I've tried all the ROMs.
Second, If you want to go back to HP's recovery, do the following:
Create a copy of update.zip and navigate to META-INF\com\google\android and open up updater-script
Delete the first three lines.
Transfer your new update.zip to your device and flash. Allow it to re-write the recovery partition.
NOTE THAT YOUR DEVICE WILL NOT ADVANCE PAST THE BOOT ANIMATION. THIS IS NORMAL.
Copy the original update.zip to a SD card and insert it into the device.
Now go to the HP recovery partition that now exists on your device and follow HP's restore instructions.
You're done, the stock 4.2.2 that came with your device is now installed.
Had to figure this out the hard way after I lost my original backup.
To the original poster, you can get it to work, but you need to make modifications to the script's fastboot commands (they will require "fastboot -i 0x03F0" before they will do anything) and you will need to setup your machine for ADB with the Slate 7 Extreme. It won't work out of the box, you can find support for that here: http://h30434.www3.hp.com/t5/Android-Tablets-e-g-HP-Slate-7/ADB-drivers/td-p/2574571
Click to expand...
Click to collapse
I did flash the modified update.zip but CWM doesn't give me the option to re-write the recovery partition. I go straight to "Install from sdcard complete". How is that re-write done?
*Update* All done - Had to select NO to questions on reboot (Replace recovery and root). Thanks so much - back to stock 4.2.2
Belmichel said:
I did flash the modified update.zip but CWM doesn't give me the option to re-write the recovery partition. I go straight to "Install from sdcard complete". How is that re-write done?
*Update* All done - Had to select NO to questions on reboot (Replace recovery and root). Thanks so much - back to stock 4.2.2
Click to expand...
Click to collapse
See my HP Slate 7 Extreme Root post: http://forum.xda-developers.com/showthread.php?t=2850893
What am I supposed to open updater-script with?
---------- Post added at 03:47 AM ---------- Previous post was at 03:31 AM ----------
Robo_Leader said:
First, nope, you'll still get freezing. I've tried all the ROMs.
Second, If you want to go back to HP's recovery, do the following:
Create a copy of update.zip and navigate to META-INF\com\google\android and open up updater-script
Delete the first three lines.
Transfer your new update.zip to your device and flash. Allow it to re-write the recovery partition.
NOTE THAT YOUR DEVICE WILL NOT ADVANCE PAST THE BOOT ANIMATION. THIS IS NORMAL.
Copy the original update.zip to a SD card and insert it into the device.
Now go to the HP recovery partition that now exists on your device and follow HP's restore instructions.
You're done, the stock 4.2.2 that came with your device is now installed.
Had to figure this out the hard way after I lost my original backup.
To the original poster, you can get it to work, but you need to make modifications to the script's fastboot commands (they will require "fastboot -i 0x03F0" before they will do anything) and you will need to setup your machine for ADB with the Slate 7 Extreme. It won't work out of the box, you can find support for that here: http://h30434.www3.hp.com/t5/Android-Tablets-e-g-HP-Slate-7/ADB-drivers/td-p/2574571
Click to expand...
Click to collapse
---------- Post added at 04:25 AM ---------- Previous post was at 03:47 AM ----------
I downloaded a script editor and deleted the first three lines of updater script but it still fails to flash.
Finally success!
Robo_Leader said:
First, nope, you'll still get freezing. I've tried all the ROMs.
Second, If you want to go back to HP's recovery, do the following:
Create a copy of update.zip and navigate to META-INF\com\google\android and open up updater-script
Delete the first three lines.
Transfer your new update.zip to your device and flash. Allow it to re-write the recovery partition.
NOTE THAT YOUR DEVICE WILL NOT ADVANCE PAST THE BOOT ANIMATION. THIS IS NORMAL.
Copy the original update.zip to a SD card and insert it into the device.
Now go to the HP recovery partition that now exists on your device and follow HP's restore instructions.
You're done, the stock 4.2.2 that came with your device is now installed.
Had to figure this out the hard way after I lost my original backup.
To the original poster, you can get it to work, but you need to make modifications to the script's fastboot commands (they will require "fastboot -i 0x03F0" before they will do anything) and you will need to setup your machine for ADB with the Slate 7 Extreme. It won't work out of the box, you can find support for that here: http://h30434.www3.hp.com/t5/Android-Tablets-e-g-HP-Slate-7/ADB-drivers/td-p/2574571
Click to expand...
Click to collapse
I have the 4450 extreme and one the things that was a little different- is that I had put the update zip on the sd card prior and it did the update on its own... WEIRD but acceptable! rooted and on 4.4.2- thanks man!
I didn't have any luck doing it this way. I ended up getting there by a slightly different avenue.
My s7e was totally non functional beyong fastboot and recovery mode being operational. I ended up downloading tegratools 2.2. Using the fastboot included in that I unlocked my boot loader with fastboot by the command
Code:
fastboot -i 0x03F0 oem unlock
(The '-i 0x03F0' is a code relating to the specific model, apparently without this the tablet will ignore your command. Please also remember that the unlock factory resets the tablet.)
It may be overboard again, but I also formatted all the system partitions
Code:
fastboot -i 0x03F0 erase boot
fastboot -i 0x03F0 erase system
fastboot -i 0x03F0 erase userdata
fastboot -i 0x03F0 erase cache
fastboot -i 0x03F0 erase preinstall
fastboot -i 0x03F0 reboot
I uploaded cwm recovery from the above version of tegratools to my s7e as it seems a bit more forgiving with signatures than the stock recovery. I used that to upload a version of update.zip with the "assert" lines removed from META-INF\com\google\android\updater-script. I also self signed the .zip to reduce the likelyhood of my upload being rejected by the tablet, it may not be needed, but I did it anyway.
Code:
adb sideload slate7update-signed.zip
when completing the firmware flash, apparently there is a common problem of the kernel not flashing correctly when recovery takes place and giving an "Error 7", this is the problem I think you solved by re-writing the unmodified firmware (but that didn't work for me)
Anyway I had to fix it by dropping back to fastboot and flashing it to "staging", which puts the kernel in a placeholder until the next boot, at which point the kernel will be written to the correct spot. Because of this writing to the correct partition, you will notice a quick double-boot as the updated kernel is written to the correct point in firmware.
Code:
fastboot -i 0x03F0 flash staging "c:\fastboot-s7e\blob"
I hope this helps.
Oh and to those curious, the beats version appears incompatible with the standard s7e, I tried modifying a rom in the same way as above and it just went to a blank screen. My guess is they've done some form of sanity check in the kernel, given that every "beats" version I've read about in tablets has been a software-only modification. I've not bothered trying to use the beats version rom with the s7e kernel, I'll leave that for someone else to try in greater depth as I'm just happy that I got everything working again.
references:
Fastboot (previously this): This is a copy of the twrp/cwm roms as well as fastboot & adb taken from tegratools 2.2 mentioned above.
SignApk (Previously this): The java files and self signing certificate I used to sign the .zip file. It was actually a bit of a pain to find a working signapk.jar that had the valid certificates included, most were broken in one way or another when trying to sign on ubuntu 12.04.
slate7update-signed.zip (previously this): A signed copy of update.zip with META-INF\com\google\android\updater-script modified to remove the assert validation lines sanity checks, be careful with this, you could nuke your tablet if you use it on an incompatible bit of hardware.
guide.txt (previously this): A full how-to with a number of things I've omitted from this response.
To those wondering, I collated the above procedure from a dozen different links on a good four or five websites, including a number of threads here on XDA. Thank you to anyone out there that contributed to the information I found, you really made my day so much better in being able to recover my tablet.
It Worked! But...
mike-s said:
I didn't have any luck doing it this way. I ended up getting there by a slightly different avenue.
My s7e was totally non functional beyong fastboot and recovery mode being operational. I ended up downloading tegratools 2.2. Using the fastboot included in that I unlocked my boot loader with fastboot by the command
Code:
fastboot -i 0x03F0 oem unlock
(The '-i 0x03F0' is a code relating to the specific model, apparently without this the tablet will ignore your command. Please also remember that the unlock factory resets the tablet.)
It may be overboard again, but I also formatted all the system partitions
Code:
fastboot -i 0x03F0 erase boot
fastboot -i 0x03F0 erase system
fastboot -i 0x03F0 erase userdata
fastboot -i 0x03F0 erase cache
fastboot -i 0x03F0 erase preinstall
fastboot -i 0x03F0 reboot
I uploaded cwm recovery from the above version of tegratools to my s7e as it seems a bit more forgiving with signatures than the stock recovery. I used that to upload a version of update.zip with the "assert" lines removed from META-INF\com\google\android\updater-script. I also self signed the .zip to reduce the likelyhood of my upload being rejected by the tablet, it may not be needed, but I did it anyway.
Code:
adb sideload slate7update-signed.zip
when completing the firmware flash, apparently there is a common problem of the kernel not flashing correctly when recovery takes place and giving an "Error 7", this is the problem I think you solved by re-writing the unmodified firmware (but that didn't work for me)
Anyway I had to fix it by dropping back to fastboot and flashing it to "staging", which puts the kernel in a placeholder until the next boot, at which point the kernel will be written to the correct spot. Because of this writing to the correct partition, you will notice a quick double-boot as the updated kernel is written to the correct point in firmware.
Code:
fastboot -i 0x03F0 flash staging "c:\fastboot-s7e\blob"
I hope this helps.
Oh and to those curious, the beats version appears incompatible with the standard s7e, I tried modifying a rom in the same way as above and it just went to a blank screen. My guess is they've done some form of sanity check in the kernel, given that every "beats" version I've read about in tablets has been a software-only modification. I've not bothered trying to use the beats version rom with the s7e kernel, I'll leave that for someone else to try in greater depth as I'm just happy that I got everything working again.
references:
Fastboot: This is a copy of the twrp/cwm roms as well as fastboot & adb taken from tegratools 2.2 mentioned above.
SignApk: The java files and self signing certificate I used to sign the .zip file. It was actually a bit of a pain to find a working signapk.jar that had the valid certificates included, most were broken in one way or another when trying to sign on ubuntu 12.04.
slate7update-signed.zip: A signed copy of update.zip with META-INF\com\google\android\updater-script modified to remove the assert validation lines sanity checks, be careful with this, you could nuke your tablet if you use it on an incompatible bit of hardware.
guide.txt: A full how-to with a number of things I've omitted from this response.
To those wondering, I collated the above procedure from a dozen different links on a good four or five websites, including a number of threads here on XDA. Thank you to anyone out there that contributed to the information I found, you really made my day so much better in being able to recover my tablet.
Click to expand...
Click to collapse
I was able to unlock my bootloader using the above method and it worked. My s7e rebooted and everything was working normally. I loaded the bootloader again to go in and do a cache wipe and my 3 year old bumped into me as I was holding down the volume+ and power buttons. Now I'm stuck in ADX mode (black screen but recognized by my pc, have tried connecting to charger, volume+ and power, volume - and power, nothing works) . I've read that Advent has released adx files for the Vega Note 7 and you can use Tegra Note 7 Super Tools to restore the Nvidia Note 7. I'm wondering if I can use the update.zip file and the nvflash files from Nvidia to restore my tablet from ADX mode.
Any suggestions?
Mike-S, Thanks for the in depth how-to. I tried to sell my Extreme 4450 and the guy that I sold it to said when he received it was in boot loop. I got it back and it is indeed the one I sent him, however, now I have a bricked tab that doesn't even allow fastboot. I have, like others tried calling HP, tried installing per you instruction and finally considered just throwing away or selling. I almost seems like the recovery was wiped... I can get to uploading from SD and have tried using your info to accomplish with no success. Any suggestions? I hate to smash it or try and sell if I can fix it.
Thank you in advance for anyone's help
som1special2 said:
however, now I have a bricked tab that doesn't even allow fastboot. I have, like others tried calling HP, tried installing per you instruction and finally considered just throwing away or selling.
Click to expand...
Click to collapse
Damn, I'm sorry to say that I'm unsure if i'll be able to help much or at all. All i can suggest is look and see if there is any pre-boot subsystem that connects to your pc via usb, similar to the mediatek "preboot mt65xx" which can sort of provide a last gasp chance of recovery.
help with ROM
Hi there,
Need desperate help. I followed the instructions here but ended up with no OS in the s7e. I kept on trying to install a signed ROM via ADB, it reaches 100% senidng but always failed inside TWRP. Not succesful even with CWM. I even tried installing from SD card but no success. Please help, thank you.
Anyone still around here?
Mike S ... not sure you (or anyone else) is paying any attention to this thread anymore (and the HP Slate 7 Extreme at this point is a fairly old device) ... but I can't get any of these methods to work and my S7E (model 4450) is basically useless right now. When cold (i.e. not booted up in prior 30mins or so), I can boot it normally, but within about 10mins, it will "crash" to the all-white HP splash screen and will never recover. Holding the power button just has it go through initial startup, get to the white HP splash screen, and sit there until the battery runs down. I haven't been able to root it yet, so the bootloader still shows "locked". What's ironic is that this device is really all I need -- I don't play high-end games and mostly just stream shows -- but now it's completely unusable. I'm not sure which is easier ... trying to get this to root or just buying something else?
So far, to root, I've tried towelroot and Cydia Impactor, but both of those returned errors as others have reported. I tried following the steps that Mike S put up here, but without my tablet being rooted, adb and fastboot don't even detect my device from the PC (though the PC detects it because I'm able to see it in Windows Explorer and drag files to the storage) ... so it seems like I can't even get to install CWM or anything further.
Maybe the right thing to do is just to dump the paperweight ... it used to work so well but about 6 months ago this stupid HP white screen crash started happening, and since then it's become a regular thing that only takes about 10 mins (at most) before it craps out. I can get to the bootloader and onboard recovery mode, but that doesn't let me load anything.
Not sure where to go next but any advice would be appreciated!
--AJ
MGrad92 said:
Mike S ... not sure you (or anyone else) is paying any attention to this thread anymore (and the HP Slate 7 Extreme at this point is a fairly old device) ... but I can't get any of these methods to work and my S7E (model 4450) is basically useless right now. When cold (i.e. not booted up in prior 30mins or so), I can boot it normally, but within about 10mins, it will "crash" to the all-white HP splash screen and will never recover. Holding the power button just has it go through initial startup, get to the white HP splash screen, and sit there until the battery runs down. I haven't been able to root it yet, so the bootloader still shows "locked". What's ironic is that this device is really all I need -- I don't play high-end games and mostly just stream shows -- but now it's completely unusable. I'm not sure which is easier ... trying to get this to root or just buying something else?
So far, to root, I've tried towelroot and Cydia Impactor, but both of those returned errors as others have reported. I tried following the steps that Mike S put up here, but without my tablet being rooted, adb and fastboot don't even detect my device from the PC (though the PC detects it because I'm able to see it in Windows Explorer and drag files to the storage) ... so it seems like I can't even get to install CWM or anything further.
Maybe the right thing to do is just to dump the paperweight ... it used to work so well but about 6 months ago this stupid HP white screen crash started happening, and since then it's become a regular thing that only takes about 10 mins (at most) before it craps out. I can get to the bootloader and onboard recovery mode, but that doesn't let me load anything.
Not sure where to go next but any advice would be appreciated!
--AJ
Click to expand...
Click to collapse
Get your device drivers right (try androidsdk if it's still not getting recognised) and fastboot the stock system images (fastboot is not root dependent). By the way why were you trying those weird rooting methods ??? Just flash supersu from cwm/twrp and be done with it.
Thanks ... I'll try androidsdk. I actually am a root n00b and so I was trying to figure out the simplest way to go. I guess I guessed wrong! But of course before I can get that working I need the right drivers ... So I'll try that first. I was thinking the drivers were OK since my PC recognized the S7E when Android loaded (before it crashed to the white screen).
Couldn't get androidsdk to work
Hello again... I never could get androidsdk to work. My computer never recognized the tablet to be able to fastboot. *sigh* As much as I hate to give up, I don't know what else to do.... I might try another PC?
Looking for update.zip for S7E
mike-s said:
I didn't have any luck doing it this way. I ended up getting there by a slightly different avenue.
My s7e was totally non functional beyong fastboot and recovery mode being operational. I ended up downloading tegratools 2.2. Using the fastboot included in that I unlocked my boot loader with fastboot by the command
Code:
fastboot -i 0x03F0 oem unlock
(The '-i 0x03F0' is a code relating to the specific model, apparently without this the tablet will ignore your command. Please also remember that the unlock factory resets the tablet.)
It may be overboard again, but I also formatted all the system partitions
Code:
fastboot -i 0x03F0 erase boot
fastboot -i 0x03F0 erase system
fastboot -i 0x03F0 erase userdata
fastboot -i 0x03F0 erase cache
fastboot -i 0x03F0 erase preinstall
fastboot -i 0x03F0 reboot
I uploaded cwm recovery from the above version of tegratools to my s7e as it seems a bit more forgiving with signatures than the stock recovery. I used that to upload a version of update.zip with the "assert" lines removed from META-INF\com\google\android\updater-script. I also self signed the .zip to reduce the likelyhood of my upload being rejected by the tablet, it may not be needed, but I did it anyway.
Code:
adb sideload slate7update-signed.zip
when completing the firmware flash, apparently there is a common problem of the kernel not flashing correctly when recovery takes place and giving an "Error 7", this is the problem I think you solved by re-writing the unmodified firmware (but that didn't work for me)
Anyway I had to fix it by dropping back to fastboot and flashing it to "staging", which puts the kernel in a placeholder until the next boot, at which point the kernel will be written to the correct spot. Because of this writing to the correct partition, you will notice a quick double-boot as the updated kernel is written to the correct point in firmware.
Code:
fastboot -i 0x03F0 flash staging "c:\fastboot-s7e\blob"
I hope this helps.
Oh and to those curious, the beats version appears incompatible with the standard s7e, I tried modifying a rom in the same way as above and it just went to a blank screen. My guess is they've done some form of sanity check in the kernel, given that every "beats" version I've read about in tablets has been a software-only modification. I've not bothered trying to use the beats version rom with the s7e kernel, I'll leave that for someone else to try in greater depth as I'm just happy that I got everything working again.
references:
Fastboot: This is a copy of the twrp/cwm roms as well as fastboot & adb taken from tegratools 2.2 mentioned above.
SignApk: The java files and self signing certificate I used to sign the .zip file. It was actually a bit of a pain to find a working signapk.jar that had the valid certificates included, most were broken in one way or another when trying to sign on ubuntu 12.04.
slate7update-signed.zip: A signed copy of update.zip with META-INF\com\google\android\updater-script modified to remove the assert validation lines sanity checks, be careful with this, you could nuke your tablet if you use it on an incompatible bit of hardware.
guide.txt: A full how-to with a number of things I've omitted from this response.
To those wondering, I collated the above procedure from a dozen different links on a good four or five websites, including a number of threads here on XDA. Thank you to anyone out there that contributed to the information I found, you really made my day so much better in being able to recover my tablet.
Click to expand...
Click to collapse
Hey Mike, you wouldn't still happen to have that signed update.zip since you've don't have it on Dropbox anymore?
Related
http://code.google.com/android/nexus/images.html#yakju
https://groups.google.com/forum/?fromgroups#!topic/android-building/b50nY_onbP4
^Thanks.
This can be flashed via CWM recovery ?
(after a 'fastboot oem lock/unlock' ?)
No. They are fastboot images. If you're not sure what these are and how to use them then I would not mess with them.
^ gotcha
can someone please put up a tutorial/guide to do this.
I really want to try this.
The shell script gives you the exact fastboot commands to run if you want to do it manually. And it will restore your phone to a true factory state with 4.0.4.
if i will use the factory img the baseband version in bootloader will be change? i see now i9020xxkl1 but my nexus is i9023?
I was wondering the same .. In the zip it says :require board=herring
require version-bootloader=I9020XXJK1|I9020XXKA3|I9020XXKI1|I9020XXKL1
require version-baseband=I9020XXJK8|I9020XXKB1|I9020XXKD1|I9020XXKF1|I9020XXKI1|I9020UCKB2|I9020UCKD1|I9020UCKF1|I9020UCKJ1|I9020KRKB3|M200KRKC1
So it should be okay , because when I reboot into the bootloader of my phone it says :
Bootloader version: I9020XXKL1
Baseband version : I9020XXKI1
My phone actually is a I9023 so I gues the images are okay to flash on a I9023
Just noticed that the full ROM version for Nexus S is 4.0.4 IMM76D. Wouldn't be better to flash this complete rom instead of the partial patch OTA which is clearly giving troubles?
HELPPPPP
can someone please put up a tutorial/guide to do this.
I really want to try this.
i wrote a guide
http://forum.xda-developers.com/showthread.php?t=1572307
goldy_rocky said:
can someone please put up a tutorial/guide to do this.
I really want to try this.
Click to expand...
Click to collapse
(No time to write a full tutorial right now but...) I'd say...
Pls wait for someone experimented to confirm what I say because I couldn't try it to confirm it works right now... And also try it at your own risk...
If your bootloader is not unlocked, follow PART 1 & PART 2 of this tutorial. (you will loose data)
(Note that ADB is not in tools folder anymore but in /platform-tools so that's where the part2 cmd as to be runned from)
Then if windows (I guess you would know what to do if on Linux) use 7zip to extract (2 times) all files from the archive.
Then copy the files to the /platform-tools folder.
The open a command prompt in that folder (shift+right click>open a command prompt here).
Then use the commands provided in the .sh script to flash all files (you can read it easily with Notepad++ for instance) one by one...
Note I don't think you can run the "sleep 5" cmd manually but you can of course wait 5' manually .
Code:
fastboot flash bootloader bootloader-crespo-i9020xxkl1.img
fastboot reboot-bootloader
sleep 5
fastboot flash radio radio-crespo-i9020xxki1.img
fastboot reboot-bootloader
sleep 5
fastboot -w update image-soju-imm76d.zip
I'm not really sure if bootloader will be locked at this time but my guess is no so just reboot the bootloader ("fastboot reboot-bootloader" or shut down the device then "Boot the SNS into the Bootloader Interface, by holding Volume UP & Power button" and look for the "LOCK STATE - LOCKED" or "LOCK STATE - UNLOCKED").
If "LOCK STATE - UNLOCKED" you may want to lock the bootloader again, just follow part2 again and replace "fastboot oem unlock" by "fastboot oem lock"
EDIT :
ale.landra91 said:
i wrote a guide
http://forum.xda-developers.com/showthread.php?t=1572307
Click to expand...
Click to collapse
You just made me feel so useless ...
First of all, the credits goes to "a2b". I am only put his work here via a link.
Secondly, PLEASE KEEEP IN YOUR MIND THAT NEITHER ME OR "a2b" IS RESPONSABLE FOR ANY LOSS OF YOURS IF YOUR PHONE GET BRICKED.
The thrid, I have tried the method on my Nexus i9023. It works perfectly for me. BUT, I cannot gurentee it works for everyone.
Okay, I just flashed the factory img according to a2b's tutorial for Galaxy Nexus. But for me I just needed to change the names for few files. If you cannot figure out what to change, I suggest you follow albundy2010's advice on post #3
Good luck!
http://androidtobe.blogspot.com/2011/12/galaxy-nexus-installing-ics-402-from.html
Seems most are not familiar with doing this so here are some things you should know.
Doing this will wipe EVERYTHING off your phone. Yes, everything including /sdcard.
Do not be a fool and flash these images to the 4g.
I am not certain about this and if you it and your phone gets messed up do not blame me.
The 9020a should be able to run this factory image. Check to see what version of the bootloader you have. If it matches one of the bootloaders in the .sh script you should be fine. I would NOT flash the bootloader included in this factory image myself. Since I do not know for sure if they are the same for both GSM models. If you follow the guide minus the parts where you flash the bootloader and the radio image I believe it will work.
Again if you try this and it breaks your phone that is on you. I am not responsible for it. I do not have a 9020a to test this on and verify it. I am fairly certain it will work perfectly. If anybody tries it let me/us know the outcome.
is there any specific advantage in flashing the factory image as opposed to flashing the incremental update ? I successfully flashed 4.0.4 using CWR over a full rom installation of 4.0.3 back from December. I wonder if there may be some subtle differences that maybe make it a bit better option to install the factory image ?
mindwalkr said:
is there any specific advantage in flashing the factory image as opposed to flashing the incremental update ? I successfully flashed 4.0.4 using CWR over a full rom installation of 4.0.3 back from December. I wonder if there may be some subtle differences that maybe make it a bit better option to install the factory image ?
Click to expand...
Click to collapse
No
Sent from my Nexus S using XDA App
I used the flash-all.sh script from the factory image file and it didn't wipe the sdcard. Backed it up beforehand anyway just in case. Recovery was broken on reboot. Flashed CWM recovery and all good. i9023.
So I recently grabbed me a Grouper recently to *cough* remember my first Android powerhouse (before I met the Optimus G) and decided to tinker with it as usual. I've owned 6 (now 7) different Groupers in this lifetime and have great experience with it, how to get those pesky drivers working, etc. This is my first 32GB model ever. Anyways, I unlocked the BL, rooted and flashed TWRP (thanks to WugFresh's toolkit) and decided to play with the newer roms (last time I owned one, KitKat was a rumor) and kernel combos. Anyways, I decided I prefer its stock performance and battery, and that maybe I'd use Xposed to tweak apperance instead. My mistake was, I should have flashed a flashable stock rom. But NOOOOO...I decided to flash it back to stock with the fastboot method (which we have various threads on, and toolkits including WugFresh's). Trying the manual method, I followed the following guide using a 4.4 image zip file:
http://forum.xda-developers.com/showthread.php?t=1907796
Claims that the sysem.img doesnt exist when it gets to that part. I extracted the entire file and it DOES exist. Anyways, I tried WugFresh's tk and sort of gives me the same ending (after literally almost an hour of waiting TWICE due to my old PC).
THERE WAS A GUIDE I SAW SOMEWHERE while Googling "how to" get back to stock on Google which actually point ou how to MANUALLY flash each .img yourself one by one via fastboot, which I really intended on doing instead of the above methods (DIY anyone?) but I can't find that guide and I'm not even sure if the post was here on XDA or Android Central. I should have done all Google search on the PC instead but ATM the tablet seemed more convenient for a search.
Anybody know the guide I am mentioning or know what I am talking about? I am assuming that method will solve my dilemma, and I like doing these things manually at times anyways....
EDIT: To my disappointment, found the post, but no good:
http://www.androidbeat.com/2013/11/flash-factory-image-nexus-device/
Apperantly everything flahes fine until it gets to the system.img part...adb/fastboot just freezes there and wont budge at all. Since I noticed that it did flash things, I've decided to flash TWRP and just flash a rom from my flash drive (thanks to a USB OTG) but I would still like to actually FIX the thing properly and return it 100% stock. Any ideas?
Crossvxm said:
I should have flashed a flashable stock rom. But NOOOOO...I decided to flash it back to stock with the fastboot method
Click to expand...
Click to collapse
I'm not sure what you mean by stock. Are you trying to flash a "Stock" rom from the community or the stock images provided by google?
If you are using nakasi-ktu84p image, the flash script contains:
Code:
fastboot oem unlock
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
fastboot flash bootloader bootloader-grouper-4.23.img
fastboot reboot-bootloader
sleep 10
fastboot -w update image-nakasi-ktu84p.zip
You can see here the exact process of getting back to stock.
The boot, cache, recovery, system, and userdata are erased.
Then an attempt to flash the bootloader. This will fail on nakasi-ktu84p and several images back.
Google has been negligent in addressing this issue.
I was able to find success with bootloader-grouper-4.23.img which I extracted from nakasi-krt16s.
You could save time and bandwidth from acquiring it here.
This bootloader also failed to flash for me!
If you have flashed a custom bootloader in the past, you may need to go all the way back to JDQ39 bootloader-grouper-4.18.img.
fastboot flash that, and then you will be able to flash 4.23 from krt16s.
Once you have passed this small ordeal you should be able to install the latest ROM.
In summary, you should be able to do the following from a system that has the fastboot binary:
Code:
EXTRACT nakasi-ktu84p-factory-76acdbe9.tgz
OVERWRITE bootloader-grouper-4.23.img with one acquired from krt16s
Code:
nakasi-ktu84p bootloader-grouper-4.23.img
MD5 = 5bdb2e87370cdb1a7ea14bb0c3e21390
krt16s bootloader-grouper-4.23.img
MD5 = df53028033c9eccf4fe5ba7bc198ce24
Code:
run flash-all.sh or flash-all.bat
PS.
I have been lured by the idea of stock stability, performance, and battery life. Something about Xposed seems dirty to me.
Battery life and Performance have always been better on a custom ROM / Kernel in my experience.
Stability can be rock solid when you've got a good system.
My favourite solution is to have the stock image installed and stripped down for size. This always you to boot in and update your apps from playstore.
I then install a custom ROM alongside via multiRom. This rom also has extras stripped out and no gapps installed.
From Rom 1 you can copy your apks into Rom 2 as needed.
I tend to avoid any apps that would be incompatible with this method!
crache said:
I'm not sure what you mean by stock. Are you trying to flash a "Stock" rom from the community or the stock images provided by google?
If you are using nakasi-ktu84p image, the flash script contains:
Code:
fastboot oem unlock
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
fastboot flash bootloader bootloader-grouper-4.23.img
fastboot reboot-bootloader
sleep 10
fastboot -w update image-nakasi-ktu84p.zip
You can see here the exact process of getting back to stock.
The boot, cache, recovery, system, and userdata are erased.
Then an attempt to flash the bootloader. This will fail on nakasi-ktu84p and several images back.
Google has been negligent in addressing this issue.
I was able to find success with bootloader-grouper-4.23.img which I extracted from nakasi-krt16s.
You could save time and bandwidth from acquiring it here.
This bootloader also failed to flash for me!
If you have flashed a custom bootloader in the past, you may need to go all the way back to JDQ39 bootloader-grouper-4.18.img.
fastboot flash that, and then you will be able to flash 4.23 from krt16s.
Once you have passed this small ordeal you should be able to install the latest ROM.
In summary, you should be able to do the following from a system that has the fastboot binary:
Code:
EXTRACT nakasi-ktu84p-factory-76acdbe9.tgz
OVERWRITE bootloader-grouper-4.23.img with one acquired from krt16s
Code:
nakasi-ktu84p bootloader-grouper-4.23.img
MD5 = 5bdb2e87370cdb1a7ea14bb0c3e21390
krt16s bootloader-grouper-4.23.img
MD5 = df53028033c9eccf4fe5ba7bc198ce24
Code:
run flash-all.sh or flash-all.bat
PS.
I have been lured by the idea of stock stability, performance, and battery life. Something about Xposed seems dirty to me.
Battery life and Performance have always been better on a custom ROM / Kernel in my experience.
Stability can be rock solid when you've got a good system.
My favourite solution is to have the stock image installed and stripped down for size. This always you to boot in and update your apps from playstore.
I then install a custom ROM alongside via multiRom. This rom also has extras stripped out and no gapps installed.
From Rom 1 you can copy your apks into Rom 2 as needed.
I tend to avoid any apps that would be incompatible with this method!
Click to expand...
Click to collapse
Your on the right track that's exactly what I was looking for, but to me it doesn't work on the system.img flashing part, it stays stuck there forever without a hint of movement at all. I left it flashing from 4am to 7am with no progress. I though it was working as the Windows Task Manager was showing fast boot constantly changing in CPU usage as it does when its at work. But sadly, it gets stuck there for good. Then closing fast boot won't work, I have to shut down the PC in order for it to leave
Crossvxm said:
Your on the right track that's exactly what I was looking for, but to me it doesn't work on the system.img flashing part, it stays stuck there forever without a hint of movement at all. I left it flashing from 4am to 7am with no progress. I though it was working as the Windows Task Manager was showing fast boot constantly changing in CPU usage as it does when its at work. But sadly, it gets stuck there for good. Then closing fast boot won't work, I have to shut down the PC in order for it to leave
Click to expand...
Click to collapse
I'm not familiar with the tools you are using. Have you used the commands directly from the command line, and what is the output?
crache said:
I'm not familiar with the tools you are using. Have you used the commands directly from the command line, and what is the output?
Click to expand...
Click to collapse
WugFresh is a toolkit made to root, unlock boot loader, relock, restore to stock, etc. And yeah I used the fastboot erase and fastboot flash commands via ADB/fast boot and as I said, everything goes well except the part where its time to flash the system.img, it just hangs there doing nothing. Tried and left it for several hours and still nothing
Try a different USB port on you computer or a different USB cable... or both.
Crossvxm said:
...
....it doesn't work on the system.img flashing part, it stays stuck there forever without a hint of movement at all.
...
Click to expand...
Click to collapse
Hi, Crossvxm...
This seems to be a relatively common problem, and I always seem to have it myself when fastboot flashing factory stock.
I've no idea why, but the fastboot connection seems to 'time-out' when fastboot flashing 'system.img'.
Now normally, and just prior to running any fastboot flash commands, you should run this command...
Code:
fastboot devices
This command doesn't actually do anything; it's essentially just diagnostic and is used to confirm you have a viable fastboot connection prior to flashing anything. If do you have a fastboot connection, you should see something like this (with the N7 booted into the bootloader)...
Code:
015d2d42xxxxxxxx fastboot
This is the Nexus 7's unique serial number followed by the word 'fastboot'. If you don't see this, then you likely have a driver problem...
...BUT HOWEVER, I KNOW I DON'T HAVE A DRIVER PROBLEM.. so when having problems with 'sending system', and upon opening a second command prompt window on my Windows laptop, and typing fastboot devices again, the Nexus 7's serial number now no longer appears... and this is AFTER the bootloader and boot img's have been sent and written successfully.
At this point, I can only conclude, and that for unknown reasons, my fastboot connection has 'died'... and 'sending system' is now permanently 'stuck'.
And the fastboot flash attempt has failed.
-----------------------------------------------------
The solution for me, was to change to a different USB port on my laptop. Another possibility might be to try a different USB cable... I haven't tried this... just a change of USB port on my laptop was sufficient, and the problem with flashing system.img was resolved.
Either way, reboot the N7's bootloader using a differerent USB port on your computer or a different USB cable... and attempt the flash again.
One final point... 'sending system' does take longer than the other .img's, probably due to it's size... but it really should take no longer than around 5 minutes... 10 minutes maximum.
Hope this helps... and good luck.
Rgrds,
Ged.
I have been asked to port my "Beginners Guide" from the TF700 forum for the TF300. Since both tablets are very similar, that was not too hard to do
If I have missed to update a link specific for the TF300, do let me know please.
And the standard disclaimer: I am not responsible if you misunderstand instructions I give here, if my instructions are wrong, if you forget to charge the battery and the tablet dies halfway through a flash or if your house goes up in flames. YOU DO THIS AT YOUR OWN RISK
These instructions assume that you are on the latest Asus bootloader: 10.6.1.27.5
To determine which bootloader you currently have:
From an "Off" state, boot the tablet with Volume Down and Power into the bootloader menu. Read the small script in the upper left. You'll see
US_epad-10.6.1.27.5-20130801" or similar.
US or WW, JP, CN is your SKU or region
10.6.1.27.5 is your bootloader version
20130801 is the build date (and immaterial in most cases).
First things first:
Backup everything on your tablet you care about to an external microSD or your PC. Don't worry about your apps. You can always install them from the Play Store.
This is just common sense. It is not inherently risky to flash custom ROMs. But something can wrong at any time and you have to be careful. If you are, this is a safe procedure.
Basically the process of flashing a custom ROM on the TF300 involves three steps:
1) Unlock the bootloader using Asus' Unlock tool
2) Install a custom recovery on the tablet
3) Flash a custom ROM of your choice using said custom recovery
Unlocking the bootloader
Your tablet should be fully charged at this point!
Make sure "USB debugging" is checked in Settings > Developer Options (if you don't see it, go to About Tablet and tap 7 times on Build Number)
Go to Asus website: https://www.asus.com/support/Download/28/1/0/9/8BmzkQ4yoz5WzBrW/32/
Choose "Android" for OS and look for the "Utilities" on the resulting page.
Download the Asus Unlock Tool v7 (not v8! It says v7 is for ICS but it'll work fine on JB - see below)
The tool downloads as a .rar file which is an archive you have to decompress. 7zip is a free and very good Windows tool that will do it for you
On your tablet, in Settings > Security check "Unknown Sources"
Copy the .apk you extracted from the .rar archive to your tablet.
Find the apk in your tablet's file browser, tap it and let it install
Open the app and follow the instructions. You will loose your warranty as soon as you click "I agree".
Update 2/15: Google added another wrinkle: It now checks even sideloaded apps and refuses to install them if they are considered not secure. The Unlock tool seems to fail their test. v8 does not install at all anymore. v7 will install if you allow "less secure apps" in your Google account settings. On the web - not your Google account on the tablet
July 2015: And another wrinkel... It seems to be pretty consistent now that the Unlock Tool hangs on the Google account password step. I suspect something changed on the Google side. It probably doesn't allow the tool to check/compare the password anymore. There have been quite a few security changes lately and the unlock tool never gets updated so I suspect that Google now is blocking access by the tool to it's servers.
The work-around is easy enough: Delete the Google account from the tablet (Settings > Accounts), then run the tool again. If that doesn't do it, do a factory reset from Settings, reboot and during the initial setup establish a WiFi connection but skip the google account setup, then run the tool
Click to expand...
Click to collapse
This can be a 5 Minute operation that goes without a hitch or a very frustrating experience with lots of error messages. There is no definite rhyme or reason for this. For some people it works like a charm, for others it works after 15, 25 or 55 attempts, for some never.... This problem is widely discussed on several forums. Google it if you hit that roadblock.
To check if you are unlocked, boot the tablet and read the tiny script. It should say:
The device is unlocked.
Installing a custom recovery on your tablet
I highly recommend you choose TWRP as your custom recovery. If you want CWM, you are on your own.
To push TWRP to your tablet you need to set up "Fastboot" between your tablet and your PC. Fastboot is a protocol that enables you low level access to your tablet.
Practice/Background
Power down your tablet and disconnect it from the dock
Push and hold the Volume Down key (left side of the rocker) and the Power key until you feel the tablet vibrate twice. Let go when you see the tiny script. Read it and it tells you that your tablet is now in fastboot mode and you will see three icons (I assume again you are on a JB 4.2 bootloader. In older bootloaders you had 4 icons and had to select the USB icon to get into fastboot mode):
RCK - (which should be flashing) is your recovery (the stock recovery at this point, but once TWRP is installed this is one way to get into it)
Android - is your system, selecting it boots you back to into your ROM.
Wipe Data - stay away! Especially with custom software installed never, ever use this option!
To toggle between the three icons use Volume Down, to select one use Volume Up. Try it but do not push Volume Up when the 'Wipe data' icon is flashing!
Installing ADB and fastboot plus the necessary drivers
For a working ADB/fastboot connection from PC to tablet you need:
a) Asus device drivers – if you connect the tablet to your PC and it's recognized as a portable device you should be ok. If not, download the Asus Sync Utility from their support/downloads site and install it to get the drivers, then uninstall the program from your PC if you don't want it. The drivers will stay.
b) Fastboot and ADB drivers which will be installed if you run the tool below.
Windows Vista, 7, 8, 10:
Download and run this cool little tool [TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.1 - xda-developers (don't forget to hit the Thanks button)
The tool installs the adb and fastboot.exe to a folder on your C:\ drive (look for adb) and the corresponding drivers. Takes about 15 seconds.
On Windows 8 and 10 you need to turn off the driver verification feature. Here's a great video on how to do it:
https://www.youtube.com/watch?v=afrvSGiMAtk
Or - even better - here's a quick command line toggle to achieve the same (thank you @Jack_Hardin):
Jack_Hardin said:
If you're running W10, you can disable Device Driver Signing without following the procedure in the linked video, but by (more simply) right-clicking on the Start button, selecting Command Prompt (Admin) and then typing:
Code:
BCDEDIT /set nointegritychecks ON
Doing the same with OFF at the end of the string, as easy to guess as it looks, will reenable them.
Click to expand...
Click to collapse
Jack_Hardin said:
Win XP (and all other Win versions if the above does not work for some reason)
I recommend the "ADB Install Tool" mentioned above or the 'Minimal ADB Fastboot Tool': [TOOL]Minimal ADB and Fastboot [7-18-13] - xda-developers
Either works fine.
If you need the drivers, get them here and install manually in Device Manager:[ADB/FB/APX Driver] Universal Naked Driver 0.72 (We dont need no stinking HTC Sync) - xda-developers
Win7 and Win8 users seem to have the best luck wth the drivers sbdags provided here: http://forum.xda-developers.com/showthread.php?t=2646279
It's fine if you want to use his Recovery Install Tool from that thread. But I highly recommend you familiarize yourself with basic fastboot commands! There are lots of tuturials all over the web.
Linux:Check out this site https://code.google.com/p/adb-fastboot-install/
iOS:[GUIDE] Set up ADB and Fastboot on a Mac easily (With Screenshots!) - xda-developers or:
http://htc-one.wonderhowto.com/how-...-mac-os-x-send-commands-your-htc-one-0151178/
The fun begins
Fastboot does not play well with USB 3.0, so use a USB 2.0 port for this. And no hubs and such....
Boot the tablet into fastboot mode and connect it to your computer via the original USB cable
In Windows Explorer navigate to the folder that contains your adb.exe and fastboot.exe
Win 7/8: Shift + right click and select "Open command window here".
For Win XP click here
select 'Run' from the Start menu, type
Code:
cmd
and hit Enter. In the resulting command prompt type
Code:
cd C:\adb\ [I](or whatever the path to your fastboot folder is..)[/I]
In the command window on your PC type:
Code:
fastboot devices
If that command returns a string of numbers and letters, you are good as gold.
Click me: View attachment 3070087
If it returns: "No devices found", fastboot is not working - yet - and you have to troubleshoot.
Getting the correct drivers working can be the hardest part of this exercise. If your computer does not "see" the tablet in fastboot, try to uninstall the existing driver (if any) in Device Manager and manually install the drivers I linked to above. And if Windows does not cooperate at all, PM me and I can hook you up with a Puppy Linux live CD with fastboot/adb set up already.
Let's assume everything is good:
On your computer go here: https://dl.twrp.me/tf300t/
Download the latest version of TWRP.
FYI ONLY: If, for whatever reason, you want to format your data partition:
Formatting /data starting with TWRP 2.7.x and later takes a lot longer than in previous versions (up to 90 minutes). LET IT FINISH. DO NOT INTERRUPT THE FORMATTING.
Rename the file to twrp.blob and place it into the same directory as your fastboot.exe. Note: More recent versions of TWRP download with an .img extension. Leave the extensions as is, rename the first part to watever is easy to type
Again check the connection with
Code:
fastboot devices
If you get the connection, in the command window type:
Code:
fastboot -i 0x0B05 flash recovery twrp.blob
or
Code:
fastboot -i 0x0B05 flash recovery twrp.img
This will flash the recovery to the recovery partition
If it is successful type:
Code:
fastboot reboot
and let the tablet boot up normally.
You may get a dialog in TWRP offering to root the stock rom. You can accept or cancel it - doesn't matter. I assume you are going to install a custom rom and they are rooted anyway.
Create a nandroid
Your almost there! You are now on the stock ROM with a custom recovery installed.
Power the tablet down and boot into the bootloader menu with Volume Down and Power buttons.
With RCK flashing, push Volume Up and you should boot into TWRP. Familiarize yourself with the many options of the touch based interface without executing anything yet. TWRP is very user friendly. You basically cannot do anything of consequence "by accident", so don't be shy.
To create your Nandroid (a full system backup) touch "Backup", leave the default selection as they are and swipe the button to create a nandroid of your current system.
This is a very healthy habit to develop: You always want to have a nandroid of your last working system squared away so that you can do a simple restore if you flash something that does not work, or something goes wrong during a flash. With a working recovery and a good nandroid you are minutes away from a working system if you soft brick your tablet.
Hint:
It's a good idea to have at least one good nandroid on external media. Sooner or later you will format your data partition and if you're like me, you may forget to backup your nandroids in the heat of the moment..
Installing a custom ROM
From here on out it's as easy as downloading the installation file of your custom ROM, booting into TWRP, choosing "Install" and navigating to the zip of the ROM you want to flash.
If you see a "signed" in the zip file name (best_rom_ever_signed.zip), make sure you check "verify zip signature" under the "Install" menu. Some devs sign their ROM zips - a better way to ensure file integrity than md5 sum.
Whatever you decide to flash: READ THE OP of the corresponding thread and make sure you have the correct bootloader and the required recovery installed! I can't stress this enough! If you are not sure, DO NOT FLASH!
Look for the ROMs in the Development section of the XDA forum for this tablet: http://forum.xda-developers.com/transformer-tf300t/development
It is mandatory to do a Factory Wipe in TWRP before installing a custom ROM or going from one ROM base to another (a so called clean install).
If you choose 'Wipe' in TWRP, all you have to do is swipe the button - 'Factory Wipe' is the default selection under the 'Wipe' menu. You will loose your apps, but it will not wipe your /data/media/ folder where your files, pictures, etc live.
If you do this right before flashing the custom ROM, make sure you have the zip file of your custom ROM on your microSD - not on your internal SD where it may get wiped....
Once you installed a custom recovery NEVER EVER UNDER ANY CIRCUMSTANCES - AND I REPEAT: NEVER! - use the 'Wipe Data' option from the bootloader menu or the "Factory Reset" option in Settings > Backup&Restore.
In your custom recovery you have the option to wipe, backup and restore every partition on your tablet selectively or collectively. Any wiping, any backup and any restore of the system, data, recovery or boot partitions MUST be done in your recovery (or in fastboot)!
You can safely use Titanium Backup or Asus Backup for apps and settings, but that's it. For everything else use your recovery.
FREE ADVICE
There are alternative methods to flash a recovery to your device using apps like GooManager (currently not supported anyway), TWRP Manager or Flashify from the Play Store which do it right from your tablet. These apps "save you the trouble" of getting ADB and fastboot set up and working on your PC. These methods still exist and they do work - mostly - and if you have root. But I would not recommend them.
If you are not willing to invest the time to learn the basics about ADB and fastboot (google "adb fastboot xda tutorial") and install the necessary drivers on your PC, you should not be flashing anything to your tablet!
GET ADB AND FASTBOOT WORKING!
Sooner or later you will do something stupid (I have done it and so will you) and ADB/fastboot may save your bacon IF you had it working when you didn't really need it.
Hit the 'Thanks' button and rate the thread 5 stars if this helped you
Click to expand...
Click to collapse
Save it for later
Mine
sbdags said:
@stamatis could we sticky this please.
Brilliant post Bernd :good:
Click to expand...
Click to collapse
Can we make that happen here to @stamatis
Thx Josh
Nice one Bernd! :good::good:
boot sequence
Hi,
Is normal to see three TUX and some phrases at the power on ?
Can I hide it ?
tnkx
Nicola
You mean the penguins?
That's normal I'd you're running a Rom that uses _that's preinit scripts. You can't hide them - why would you?
thank you SO much
I love you!
Wow, I've never had so much trouble rooting a device before! And days ago, I rooted my T700 without any problems. So, I guess I should have expected the hubby's TF300T to be problematic! Recoveries didn't work, I tried multiple ones. Eventually, I had a recovery that didn't recognize any partitions. I used fastboot to erase them all and put the stock ROM back on--wouldn't boot up. This thread was an immense help! I've moved the other recoveries and ROMs into my non-working folder!
Thanks again!
Lynne
Awesome
What a well written guide! I have a decent understanding of fastboot and adb (although minimal experience), and I perfectly understood every step.
My advice to all newbies like me.... Read stuff ALL of the way through (and understand it), BEFORE stepping off in it.
ok im a bit lost... i have rooted both Nexus 7s, nook hd and hd+, a tf101, and a few tv boxes.. so im not sure why this is hanging up... im trying to root and install the TWRP recovery on a tf300... followed the instructions and even have the char string that means... every thing should be good to go.... have checked that the twrp is in the dir of adb... but when i try to push the twrp.blob to the tf300, it just give me.. this error..
c:\adb>fastboot devices
015d14febf64041b fastboot
c:\adb>fastboot -i 0x0B05 flash recovery twrp.blob
sending 'recovery' (6800 KB)...
FAILED (command write failed (Invalid argument))
finished. total time: 0.002s
so.. at this point i not sure what else to trouble shoot... the tablet is in fastboot mode.. adb sees the tablet.. at least that is what the char string confirms.... so any help would be very much appreciated.. just a bit lost on this...
chris
scuzzo said:
ok im a bit lost... i have rooted both Nexus 7s, nook hd and hd+, a tf101, and a few tv boxes.. so im not sure why this is hanging up... im trying to root and install the TWRP recovery on a tf300... followed the instructions and even have the char string that means... every thing should be good to go.... have checked that the twrp is in the dir of adb... but when i try to push the twrp.blob to the tf300, it just give me.. this error..
c:\adb>fastboot devices
015d14febf64041b fastboot
c:\adb>fastboot -i 0x0B05 flash recovery twrp.blob
sending 'recovery' (6800 KB)...
FAILED (command write failed (Invalid argument))
finished. total time: 0.002s
so.. at this point i not sure what else to trouble shoot... the tablet is in fastboot mode.. adb sees the tablet.. at least that is what the char string confirms.... so any help would be very much appreciated.. just a bit lost on this...
chris
Click to expand...
Click to collapse
The bootloader is unlocked yes ?
What is your bootloader version ?
Try a different USB port ?
Thx Josh
lj50036 said:
The bootloader is unlocked yes ?
What is your bootloader version ?
Try a different USB port ?
Thx Josh
Click to expand...
Click to collapse
hello,
bootloader is unlocked or at least it says it is at the boot screen.. "your device is unlocked"..
real time... just swapped ports... its says it pushed the recovery.... so... will continue along this path.... and see how it goes.... i think its good to go... just as you suggested... port swap... cool... i bought this just so i could root it and put the kit kat kis rom on it.... thanks for your help and big ups to OP.... great guide ...
thanks again.!
Nice guide!
I've been wanting to put a custom rom on my transformer for a long time. This guide worked like a charm.
The only problem I had was when I tried to flash TWRP recovery, but switching USB port fixed that problem.
I flashed the latest CM12.1 nightly and it works fine.
Many thanks!
Help please, I'm stuck!
I'm trying to flash recovery,
after typing:
fastboot -i 0x0B05 flash recovery twrp.blob
I got this on tablet screen:
"Starting Fastboot USB download protocol"
for about 25-30 already and nothing happens, any ideas?
thanks
You won't see anything on the tablet screen, but what does the command window say?
Go back, read the guide again, it's all in there....
Sent from my K00C using Tapatalk
berndblb said:
You won't see anything on the tablet screen, but what does the command window say?
The command window didn't say anything, just blinking cursor after my command line
Go back, read the guide again, it's all in there....
Sent from my K00C using Tapatalk
Click to expand...
Click to collapse
Mishka79 said:
I'm trying to flash recovery,
after typing:
fastboot -i 0x0B05 flash recovery twrp.blob
I got this on tablet screen:
"Starting Fastboot USB download protocol"
for about 25-30 already and nothing happens, any ideas?
thanks
Click to expand...
Click to collapse
Thanks,
After writing the question, I've restarted my tablet and did all the steps again.
The second time everything worked as it should. :good:
thanks for your great guide
Really great guide
Amazing guide thanks for the help
Thank you for this good tutorial but I have one question.
I'm a newbie here, here is my dilemma: I've flashed CM android 5.1.1 successfully from stock 4.2. (Thanks for this detailed tutorial), but I lost my root privileges, now I can't use my root apps. How do I apply root to this ROM? My device is an ASUS TF300T. I've tried Kingo Root and King Root but no success.
I would really appreciate your help and inputs.
Cheers!
ANDROIDYER said:
I'm a newbie here, here is my dilemma: I've flashed CM android 5.1.1 successfully from stock 4.2. (Thanks for this detailed tutorial), but I lost my root privileges, now I can't use my root apps. How do I apply root to this ROM? My device is an ASUS TF300T. I've tried Kingo Root and King Root but no success.
I would really appreciate your help and inputs.
Cheers!
Click to expand...
Click to collapse
I have not used CM in quite a while but I think you have to enable root in Developer Options. I think it is not enabled by default.
If hat does not work you can go to Chainfire's website and download the flashable SuperSU and just flash it in recovery
Thanks and a couple of notes on TF300T
Thanks so much for the great guide. My 300TF was nearly bricked due to slowness and freeze-ups. I'd stopped using it. The process worked and am now running KatKiss. Couple of problems and their solutions for anyone who may have the 300TF:
-When trying to "Unlock Bootloader" I kept getting to "enter Google password" but when I did so (correctly) it was not accepted. The solution was to do another factory reset and NOT install google services. Didn't ask for password after that.
-Used fastboot command line to install "twrp.blob" but nothing happened and it timed out. I had to take out other usb connect programs first (in my case "easy-tether" and my LG phone connect app.) After that everything went as per your guide.
Thanks again
Geneg
Hello to everybody, so i was thinking my nakasi was really dead this time, the last thing i did was flashing a 5.1.1 rom next when i rebooted got stuck on lolipop boot loop so i restarted the tablet
manually to access the recovery, and to my awe, i couldn't no more access the recovery ! (latest twrp) tried again and again nothing, no recovery no bootloader, can't start the OS
always stuck on google logo with the options above, start, bootloader, recovery etc, today i realized i could access the bootloader and fastboot mode (ADB recognize my device when i type fastboot devices)
so i tried flashing stock image and stuff with no luck, tried many stock roms, tried wug's toolkit and the flash all.bat still no luck, i get all kind of error messages here is a screenshot, help is really appreciated if there is anything i can do to save it :
View attachment 3305126
the problem seems to be that i can't write the things i send to the tablet via ADB, tried the NVflash recovery today and got :
View attachment 3306049
Have you tried not imputing the full file address as you have the emulator already running from that location.
So recovery command would be.
Fastboot flash recovery "name of recovery Img file here"
Just make sure that the image file is in the platform-tools folder.
Probably not your issue but its going to save you some typing.
Good luck
gaosphappy said:
Have you tried not imputing the full file address as you have the emulator already running from that location.
So recovery command would be.
Fastboot flash recovery "name of recovery Img file here"
Just make sure that the image file is in the platform-tools folder.
Probably not your issue but its going to save you some typing.
Good luck
Click to expand...
Click to collapse
Thank you for the tip I'll certainly use it, but i don't think it is the culprit since as you can see in the screenshots
the files get sent successfully but cannot be written, my bootloader is unlocked by the way
Homurato said:
Thank you for the tip I'll certainly use it, but i don't think it is the culprit since as you can see in the screenshots
the files get sent successfully but cannot be written, my bootloader is unlocked by the way
Click to expand...
Click to collapse
Did you try the latest factory image? I noticed you are flashing a very old bootloader, possibly the first one? 4.23 is the current version.
Where is flatline_grouper.img coming from? I've never seen that.
adomol said:
Did you try the latest factory image? I noticed you are flashing a very old bootloader, possibly the first one? 4.23 is the current version.
Where is flatline_grouper.img coming from? I've never seen that.
Click to expand...
Click to collapse
Hello kind sir, of course at first i tried the 5.1.1 full factory image with the NRT toolkit and got the same writing errors next i tried many bootloaders
(one of them found it here as a 100% working bootloader) the Flatline is the recovery of the NVflash tool where you can access it to unbrick full bricked N7s
if you got blobs.bin of your N7 backed up (clearly not my case)
the flashing writing error i get it with everything i try to flash, recoverys bootloader system etc
when i send them with the flash all command they got sent to the tablet okay, but when writing i get the errors
i don't know but there is a small informations if that can help, before it broke my system was in EXT4 and all the rest in F2FS
It's entirely possible your memory has failed. I'm reading more and more people running into corrupted memory issues.
You can get a replacement motherboard cheap on eBay if nothing else works.
fwayfarer said:
It's entirely possible your memory has failed. I'm reading more and more people running into corrupted memory issues.
You can get a replacement motherboard cheap on eBay if nothing else works.
Click to expand...
Click to collapse
I'm still hoping for a software solution since my fastboot works fine, I'll let the motherboard solution my last i guess
Hello some news about the still staggering situations : when the tablet is off and i put the charger i get the battery refiling animation ! so that mean the bootloader isn't broken
and i still can access fastboot mode, even when i push a bootloader i get a signature match message, but the problem is still that the things i push can't be written as i'm still getting a :
FAILED <Remote: <FileWriteFailed>> changed usb cables, changed ports, the last time the tablet was working i had the system on EXT4 and the rest on F2FS, maybe if i can convert everything to EXT4 ?
Well,
basically subject says all.
I tried to install zulu99 Full android rom 2.1.
basically 'fastboot flash system system.img worked' but 'fastboot -w' failed ('no space left' error).
So I rebooted hoping to reflash a nandroid backup but now the box keeps on rebooting into twrp trying to wipe cache and data but failing. after a while it stops and black screen appears.
I attach the screen it presents when reboots.
Please tell me I didn't trash 220 euros.
Thanks.
puppinoo said:
Well,
basically subject says all.
I tried to install zulu99 Full android rom 2.1.
basically 'fastboot flash system system.img worked' but 'fastboot -w' failed ('no space left' error).
So I rebooted hoping to reflash a nandroid backup but now the box keeps on rebooting into twrp trying to wipe cache and data but failing. after a while it stops and black screen appears.
I attach the screen it presents when reboots.
Please tell me I didn't trash 220 euros.
Thanks.
Click to expand...
Click to collapse
Theres a hardware method to boot into the bootloader, this i think you can test, just to see if you can at least get into bootloader.....nothing more
Details in the official nvidia link
http://nv-tegra.nvidia.com/gitweb/?...ob_plain;f=README_SHIELD;hb=rel-22r18-partner
There's a thread here on the "questions" thread with users reporting that the timing of the hardware method can be a pain in the you know where.............might be worth looking into that thread for their experiences in booting the bootloader using the hardware method
Disclaimer:If your brave enough to risk a brick, read on
I suspect this might be the 2.1 stock/twrp issue........current twrp, or current stock dont play nice
Its a good sign that SOMETHINGS loading, rather then NOTHING booting, but dont know if theirs a solution
My analysis of the situation, of what little i know, the -w (wipe) command was expecting a stock recovery but instead got twrp, which is why your in this situation.........maybe, i stress maybe, if you could reflash stock again, you might be able to boot into android stock again and try full android again, leaving out twrp, until a twrp fix is found
Edit
Saying that, if the bootloader is, as i suspect, now using twrp to flash things, then you might be boned....... im no expert on bootloaders, stock "recoveries" and how they work, so i might be wrong on that
Reports around here say that 1.3 stock firmware is the recommended back to stock firmware, apparently, flashing any other firmware versions, bring their own issues.............
From 1.3 stock, use nvidias official OTA to upgrade from 1.3 stock, to 2.1 stock, then try 2.1 full android again...........note, i dont think you can skip firmwares i.e. you have to upgrade to 1.4, then to 2.0, then to 2.1, alot of downloading.......the OTA does'nt give you any other choice
Before doing anything that ive suggested, wait till someone with more experience to come along........i dont want to be responsible for you fully bricking your shield..........just wanna give you an idea of what i think has happened
If worse comes to worse, if you have warrenty, get a replacement
Gd luck........remember, this is an analysis of your predicament of what i THINK might of happened, and what steps, i likely might of entertained.......after looking into it more thouroughly, knowing that i could get a replacement if it went downhill.........so your mileage might vary
Edits
Crappy grammer, further musings, clarifications
Thanks.[/QUOTE]
puppinoo said:
Well,
basically subject says all.
I tried to install zulu99 Full android rom 2.1.
basically 'fastboot flash system system.img worked' but 'fastboot -w' failed ('no space left' error).
So I rebooted hoping to reflash a nandroid backup but now the box keeps on rebooting into twrp trying to wipe cache and data but failing. after a while it stops and black screen appears.
I attach the screen it presents when reboots.
Please tell me I didn't trash 220 euros.
Thanks.
Click to expand...
Click to collapse
I had something similar about... shield goes booting in recovery and trying delete some cache and keeps repeat and repeat
Hardware boot in fastboot / bootloader mode
Accessing Bootloader via Hardware
Unplug power from the Shield Android TV. *
Wait a few seconds.
Hold down the power button.
Plug in power
Count to three
Release the power button
You should see the bootloader screen.
If you hold it down too long or not long enough, it simply doesn’t work.
Restore Shield Android TV to Stock
P.s. Personally me I followed this instructions and kind of magically got it in bootloader mode. First done by instruction and then just gave up and pressed randomly and fastboot screen appear. Thanks God I had to done only once, if I would do again I wouldn't had patients
Good luck with this, hope you will get sorted
Here will be link about where I got instructions about hardware boot
http://nvidiashieldzone.com/index.php/shield-android-tv/root-shield-android-tv/
Sent from my Nokia 3310 using free xda app
Thanks a lot fro your help.
I was able to put the box in fastboot mode.
Since I'm not that expert can you tell me where and which rom I have to download (I have a french 16gb version of the box).
Then I'd need to know exactly what commands to performs (even a link to a tutorial is fine).
I really appreciate your help. It seems I can (hopefully) save the box.
EDIT: The fastboot command gave me a (not enough space) when I bricked the box. Is there a risk it could happen again while flashing stock? No idea how much space I have left on the box really.
EDIT2: I found this page: https://developer.nvidia.com/shield-open-source
and I'm downloading this rom called nv-recovery-image-shield-atv-upgrade2_1.zip
and Intend to follow these instructions: http://developer.download.nvidia.co...TV/Upgrade-2.1/HowTo-Flash-Recovery-Image.txt
Can anyone please confirm I'm doing right?
EDIT with joy : I followed all the steps using that rom and it seems everything worked. I reconfiguring the box now. Thanks for help.
basically the procedure I intend to follow is this part (please confirm it's ok):
To flash this recovery image to your SHIELD, run the following commands from
the directory where you extracted the recovery image package. If this is the
first time you have done this procedure, you must unlock the bootloader. Get
DTB file name to use for flashing for your product(see below):
P.s. maybe Since past fastboot commands failed and I only flashed system from zulu99 I could skip the 'fastboot flash boot boot.img' command so if it fails again I still can attempt the fastboot process again?
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot flash staging blob
fastboot flash dtb <DTB file name>
puppinoo said:
Thanks a lot fro your help.
I was able to put the box in fastboot mode.
Since I'm not that expert can you tell me where and which rom I have to download (I have a french 16gb version of the box).
Then I'd need to know exactly what commands to performs (even a link to a tutorial is fine).
I really appreciate your help. It seems I can (hopefully) save the box.
EDIT: The fastboot command gave me a (not enough space) when I bricked the box. Is there a risk it could happen again while flashing stock? No idea how much space I have left on the box really.
EDIT2: I found this page: https://developer.nvidia.com/shield-open-source
and I'm downloading this rom called nv-recovery-image-shield-atv-upgrade2_1.zip
and Intend to follow these instructions: http://developer.download.nvidia.co...TV/Upgrade-2.1/HowTo-Flash-Recovery-Image.txt
Can anyone please confirm I'm doing right?
Click to expand...
Click to collapse
You are on the right way with those links
P.s. You can do manual one by one entering or paste and copy those commands or (I'm doing) drag and drop file "flash-all.bat" on cmd previous opened there where you have abd/fastboot etc files and extracted RIGHT FIRMWARE (like shift and right click mouse "open command prompt here"
And after this all sit down and relax
Anyway you are on the right way.
P.s. Hope you download adb fastboot drivers somewhere from Internet !?!
Sent from my Nokia 3310 using free xda app