Related
Hello!
I Tried To Install A Custom ROM But After Its Successful Installation Using CWM When I Rebooted The Fone it didnt booted!
No Key Combinations Work ETC!
But When I Connect it to the pc i hear a sound on windows!
I Also Checked On Device Manager IT Shows Some LGE AndroidNet USb Serial Port(COM15)
Please Help Me! I Don't Wanna Go To The Service Center!
I Bought The Device Like 2 Or 3 years Ago I Don't Remember And Also The Device Is Rooted So Warranty Is Void. Please
AppY.fTw.wOw^ said:
Hello!
I Tried To Install A Custom ROM But After Its Successful Installation Using CWM When I Rebooted The Fone it didnt booted!
No Key Combinations Work ETC!
But When I Connect it to the pc i hear a sound on windows!
I Also Checked On Device Manager IT Shows Some LGE AndroidNet USb Serial Port(COM15)
Please Help Me! I Don't Wanna Go To The Service Center!
I Bought The Device Like 2 Or 3 years Ago I Don't Remember And Also The Device Is Rooted So Warranty Is Void. Please
Click to expand...
Click to collapse
I no longer use this device, so I'm not aware if other users had the same issue like you.
First, did you try searching this forum for similar issues?
If not, it might be a better good place to start.
Second, please explain better whats happening to your phone:
Can you turn it on? If you can, what do you see?
Can you enter recovery mode? (volume down + home + power)
Can you enter emergency mode? (volume up + volume down + power)
Did you try flashing stock firmware with KDZ-flasher?
What ROM did you try to install? Did you check the ROM's page in these forum?
need4steer said:
I no longer use this device, so I'm not aware if other users had the same issue like you.
First, did you try searching this forum for similar issues?
If not, it might be a better good place to start.
Second, please explain better whats happening to your phone:
Can you turn it on? If you can, what do you see?
Can you enter recovery mode? (volume down + home + power)
Can you enter emergency mode? (volume up + volume down + power)
Did you try flashing stock firmware with KDZ-flasher?
What ROM did you try to install? Did you check the ROM's page in these forum?
Click to expand...
Click to collapse
Hello Bro,
When I Try To Turn It On It Vibrates
I Tried To Enter The Recovery Mode But When I Try To Do The Capacative Touch Buttons Light Up For A Second OR Two, The Device Vibrates And Then Again Dead!
Cant Enter Emergency Mode Same Thing Happens Above There ^
Tried To Flash Using KDZ But Device Was Not Found!
I Tried To Install iPhonoid Rom From http://theunlockr.com/roms/android-roms/lg-roms/lg-optimus-l3-e400-roms/
Also When I Try To Connect The Device Through USB I Hear The Sound But It Fails To Install 1 Driver! (USB MTP Device)
When I checked using adb in cmd by the command
Code:
adb devices
i get the list of devices attached and it shows my device there!
Thanks!
AppY.fTw.wOw^ said:
Hello Bro,
When I Try To Turn It On It Vibrates
I Tried To Enter The Recovery Mode But When I Try To Do The Capacative Touch Buttons Light Up For A Second OR Two, The Device Vibrates And Then Again Dead!
Cant Enter Emergency Mode Same Thing Happens Above There ^
Tried To Flash Using KDZ But Device Was Not Found!
I Tried To Install iPhonoid Rom From http://theunlockr.com/roms/android-roms/lg-roms/lg-optimus-l3-e400-roms/
Also When I Try To Connect The Device Through USB I Hear The Sound But It Fails To Install 1 Driver! (USB MTP Device)
When I checked using adb in cmd by the command
Code:
adb devices
i get the list of devices attached and it shows my device there!
Thanks!
Click to expand...
Click to collapse
It's very problematic that you can't enter your device into emergency mode.
I think the only option that is left regarding software is to uninstall all of the drivers that are already installed for you device,
installing the latest drivers from the official site, and then try to use LG Mobile Support Tool to flash stock firmware.
Other than that you can only send it for a hardware repair
need4steer said:
It's very problematic that you can't enter your device into emergency mode.
I think the only option that is left regarding software is to uninstall all of the drivers that are already installed for you device,
installing the latest drivers from the official site, and then try to use LG Mobile Support Tool to flash stock firmware.
Other than that you can only send it for a hardware repair
Click to expand...
Click to collapse
Bro i Tried To Use LG Mobile Support Tool And In Downloading Mode (Remove Battery>Press And Hold Volume Down Button>Plug In USB) It Gets Recognized (Only In Downloading Mode) And Shows The The Device LG E400 Has The Latest Software Installed V20A. When I Try To Use Update Recovery It Downloads A File Of 166.76 MB And Then Starts Installing it But It Gets Stucks @ 4 % For 5-10 Mins And Then The Tool Asks Me To Replug USB Etc And Then Retry But Same Thing Happens!
In Downloading Mode The Device Is Also Recognized By KDZ Updater But While Flashing A Stock Rom I Get An Error Of wParam And lParam!
Please Help!
Thanks
your device not die yet, try use LG support tool again, when it stuck at 4% or above, reboot your phone while plugging in computer. after that, hope it continue processing. this had worked with my fiend's phone
kien_vip said:
your device not die yet, try use LG support tool again, when it stuck at 4% or above, reboot your phone while plugging in computer. after that, hope it continue processing. this had worked with my fiend's phone
Click to expand...
Click to collapse
tnx for the reply ill give it a try :good:
btw how to i reboot? using the power button??
Hey Bros!
I Found That In LG Support Tool It Says The In The Phone The Software Version Installed Is V20A
But There Is No Such Software Version For The Device L3 In LG Firmware Download Page!
But There Is One For LG Optimus L5
So I Guess That I Installed The Rom For L5 To L3 And It Is Bricked Now So Any Solution? o:
Thanks
AppY.fTw.wOw^ said:
Bro i Tried To Use LG Mobile Support Tool And In Downloading Mode (Remove Battery>Press And Hold Volume Down Button>Plug In USB) It Gets Recognized (Only In Downloading Mode) And Shows The The Device LG E400 Has The Latest Software Installed V20A. When I Try To Use Update Recovery It Downloads A File Of 166.76 MB And Then Starts Installing it But It Gets Stucks @ 4 % For 5-10 Mins And Then The Tool Asks Me To Replug USB Etc And Then Retry But Same Thing Happens!
In Downloading Mode The Device Is Also Recognized By KDZ Updater But While Flashing A Stock Rom I Get An Error Of wParam And lParam!
Please Help!
Thanks
Click to expand...
Click to collapse
When saying download mode you're referring to emergency mode?
Do you see in your phone that you're in emergency mode?
AppY.fTw.wOw^ said:
Hey Bros!
I Found That In LG Support Tool It Says The In The Phone The Software Version Installed Is V20A
But There Is No Such Software Version For The Device L3 In LG Firmware Download Page!
But There Is One For LG Optimus L5
So I Guess That I Installed The Rom For L5 To L3 And It Is Bricked Now So Any Solution? o:
Thanks
Click to expand...
Click to collapse
Maybe try what @kien_vip suggested.
And maybe try flashing the right stock version with KDZ-flasher.
need4steer said:
When saying download mode you're referring to emergency mode?
Do you see in your phone that you're in emergency mode?
Maybe try what @kien_vip suggested.
And maybe try flashing the right stock version with KDZ-flasher.
Click to expand...
Click to collapse
Hey,
When i say download mode i mean (Remove Back Cover and Battery>Plug in USB while pressing Volume Down Key!)
As far as i guess we can enter emergency mod by pressing both the volume keys and power key at the same time.
I tried using KDZ but at some point gives me an error of WParam and LParam as I posted above.
AppY.fTw.wOw^ said:
Hey,
When i say download mode i mean (Remove Back Cover and Battery>Plug in USB while pressing Volume Down Key!)
As far as i guess we can enter emergency mod by pressing both the volume keys and power key at the same time.
I tried using KDZ but at some point gives me an error of WParam and LParam as I posted above.
Click to expand...
Click to collapse
Yes, you're right - to enter emergency mode hold volume up + volume down + power
When you're inside you'll see on your screen "EMERGENCY MODE" on a yellow background.
Only the use KDZ-flasher or the lg mobile support tool.
If you're indeed in this mode, then try what @kien_vip suggested above.
need4steer said:
Yes, you're right - to enter emergency mode hold volume up + volume down + power
When you're inside you'll see on your screen "EMERGENCY MODE" on a yellow background.
Only the use KDZ-flasher or the lg mobile support tool.
If you're indeed in this mode, then try what @kien_vip suggested above.
Click to expand...
Click to collapse
I tried to enter the mode but failed!!
The buttons just light up for a second or two then vibrate then again dead.
I Cant Enter Emergency Mode But Download Mode!!!
NO Volume Up+Volume Down+ Power Button
But
YES Volume Down Pressed While Plugging In USB
AppY.fTw.wOw^ said:
I tried to enter the mode but failed!!
The buttons just light up for a second or two then vibrate then again dead.
I Cant Enter Emergency Mode But Download Mode!!!
NO Volume Up+Volume Down+ Power Button
But
YES Volume Down Pressed While Plugging In USB
Click to expand...
Click to collapse
Then all is left for you is to try what @kien_vip suggested previously.
need4steer said:
Then all is left for you is to try what @kien_vip suggested previously.
Click to expand...
Click to collapse
Before entering emergency mode you should remove the battery for a few seconds. Place it back into your phone then enter into emergency mode. Hope this could help you.
Lg update tool uses baseband as the only check whether your device has the latest update. This means you will get the update if you use an older baseband. However, you should try emergency option.
Thanks To All Of You Guys Problem Solved!
Took It To Local Repair Center And Using RIFF BOX JITAG They Solved It!
It Costed Me INR - Rs. 600 Or USD - Around 10 $!
Thanks Everyone! :good:
AppY.fTw.wOw^ said:
Thanks To All Of You Guys Problem Solved!
Took It To Local Repair Center And Using RIFF BOX JITAG They Solved It!
It Costed Me INR - Rs. 600 Or USD - Around 10 $!
Thanks Everyone! :good:
Click to expand...
Click to collapse
Good to know!
Thanks a lot for the detailed information.
hi
I have lg optimus e400, first I flash ICS cyanogenmod then I return to stock ROM....then I discovered a kitkat update and I flash it but due to my vision issues again I returned to stock ROM, until I noticed really odd problem my system memory became smaller, 62MB to be specific, which is usually 125mb free space after a factory reset, I do the reset again and again using factory reset on settings and in the cwm recovery and nothing happens my installed apps is still there ,,other than that many apps stopped unexpectedly and doesn't work anymore (e.g. message, camera, gapps,WAP/mobile data,com.android etc)...
solution I tried:
-factory reset
-ROM reflashing
-clearing data and fix permissions via cwm recovery(this one fix the gapps and com.android force stopped)
any suggestions ....
thanks any effort and help is much appreciated..
allainvillanueva said:
I have lg optimus e400, first I flash ICS cyanogenmod then I return to stock ROM....then I discovered a kitkat update and I flash it but due to my vision issues again I returned to stock ROM, until I noticed really odd problem my system memory became smaller, 62MB to be specific, which is usually 125mb free space after a factory reset, I do the reset again and again using factory reset on settings and in the cwm recovery and nothing happens my installed apps is still there ,,other than that many apps stopped unexpectedly and doesn't work anymore (e.g. message, camera, gapps,WAP/mobile data,com.android etc)...
solution I tried:
-factory reset
-ROM reflashing
-clearing data and fix permissions via cwm recovery(this one fix the gapps and com.android force stopped)
any suggestions ....
thanks any effort and help is much appreciated..
Click to expand...
Click to collapse
Hey, Sorry If im Replying Too Late.
Try Re-Flashing Stock RoM Using Kdz Updater.
This Should Help You! Then If You Want To Root Again Try SuperOneClick Root (Easiest Way) And Install CWM
please somebody help my lg g2 stuck at boot logo. i cannot boot to fastboot, recovery or download mode.
when i try to get to download mode i get white screen with some critical error.
DemiGod Crash Handler : critical crash:
Press key to choose Dload Mode or Reboot
1)Volume Up: Dload Mode.
2) Volume Down: Reboot.
If you choose Dload Mode,
Please do following action.
1)Dload Mode. Please connect USB
2) Get the ram dump image using QCT's Memory Debug App
when i chose download mode it stays at this screen and lg flashtools doesn't recognizes it.
I got the same issue, Mine happened when I was using KDZ and I moved my phone but i guess my usb connection went on and off so everything just crashed . I haven't find a fix yet but if I do i'll let you know
anyone have solution to this, i have similar problem
Same issue, my PC doesn't even detect the phone.
Please help !!!
Raiden350 said:
Same issue, my PC doesn't even detect the phone.
Please help !!!
Click to expand...
Click to collapse
this man can help " aftabalam8c2". you have to force your mobile into Qualcomm HS-USB QDLoader 9008 mode.
http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830
only this
Solution I guess it is here
ilyas111 said:
please somebody help my lg g2 stuck at boot logo. i cannot boot to fastboot, recovery or download mode.
when i try to get to download mode i get white screen with some critical error.
DemiGod Crash Handler : critical crash:
Press key to choose Dload Mode or Reboot
1)Volume Up: Dload Mode.
2) Volume Down: Reboot.
If you choose Dload Mode,
Please do following action.
1)Dload Mode. Please connect USB
2) Get the ram dump image using QCT's Memory Debug App
when i chose download mode it stays at this screen and lg flashtools doesn't recognizes it.
Click to expand...
Click to collapse
Brother I had the same problem yesterday and the pc didnt even detect the lg g2.... The thing is just do like I did listen carefully.
1 / Download LGMobile Support tool and install it quickly
2/ Open that program and click on install drivers ( when drivers are installed just go to the right top corner you will find an " OPTION ' click on it >>> And then click on upgrade recovery and do the process it says until it downloads and finishes )
3/ Go to the phone and enter Dload mode by pressing one the volume UP button and plug the usb cable directly to your device
4/ When the process will be finished you will have your phone healthy ))) and please do not unplug the lg g2 during the process
Yesterday I flashed (CSE flash) v30a KDZ to recover my GPS which as having problems getting locks and it all went well, it seemed the GPS got back working.
Later I used the DP Root to root it and it went ok.
After using the DP REC (if required for evaluation, please inform), my phone rebooted and it showed me the following message:
ERROR : boot certification verify
[1040] ------------------------------------------
[1090]
[1140] Secure booting Error!
[1200] Cause : boot certification verify
[1250]
[1300] ------------------------------------------
Click to expand...
Click to collapse
Then goes to this:
------------------------------------------
Critical Error!
------------------------------------------
Demigod Crash Handler : Critical Error!
Press key to choose Dload Mode or Reboot.
1) Volume Up : Dload Mode
2) Volume Down : Reboot.
If you choose Dload Mode,
Please do following action.
1) Dload Mode. Please connect USB.
2) Get the ram dump image using QPST Configuration.
------------------------------------------
Board Info
rev. : 1.1 speed,pvs : 1,2 serial : XXXXXXXXXX
------------------------------------------
Click to expand...
Click to collapse
Pressing the power button for more than 13s I can shut it down so that I can try the Volume Up + connect USB, but then it just powers the phone on and starts the above stated.
By pressing the Volume down + Power and pressing again after the LG Logo shows up, I can go to the reset screen but at the finish it doesn't show the factory reset or TWRP, just starts the sequence of screens above.
By pressing the Volume Up on the Demigod Crash screen, it show the following message:
Volume Up is pressed : Jump to Dload Mode.
Click to expand...
Click to collapse
and stays that way, but then the computer recognizes the "LGE AndroidNet USB Modem" and "LGE AndroidNet Serial Port", no more LG stuff there, and the LG Flash Tool doesn't go past 4%.
On Ubuntu it recognizes the same devices, but doesn't get the partitions
Does anyone know any way so that I can get out of this?
Hi @darknessmessiah,
Any luck with your issue? I've received a strikingly similar result after attempting to flash the stock lollipop to my LG G2 801 from the T-mobile forum.
jjmontem said:
Hi @darknessmessiah,
Any luck with your issue? I've received a strikingly similar result after attempting to flash the stock lollipop to my LG G2 801 from the T-mobile forum.
Click to expand...
Click to collapse
Hi there! Yes, I got to get it back... But it was this hard
Anyway there goes some tips:
After you remove the battery plug, you only need to put it back after everything is done.
You have to keep trying the short circuit until you get a new hardware called "Qualcomm hs-diagnostics 9006" and you computer recognizes a lot of disk partitions. The normal device my computer recognized was "Qualcomm HS-USB QDLoader 9008" and no tip out there worked.
When the computer recognizes the wrong device, remove the USB, plug it back and try again. One time it recognized one whole 32GB partition, but thankfully I didn't try anything besides removing the USB and try again.
After everything, I got Download Mode back and, after some tries (I've got some errors), got the flashtool to flash the ROM back.
jjmontem said:
Hi @darknessmessiah,
Any luck with your issue? I've received a strikingly similar result after attempting to flash the stock lollipop to my LG G2 801 from the T-mobile forum.
Click to expand...
Click to collapse
infect you need to fix the download mod
i can fix plz contact me https://www.facebook.com/faheem.anjum2
Wow, that's miserably complicated. And to show you my naivite, I wasn't aware that one could enter download mode by plugging in the phone to a computer with a USB cord, and holding the volume up button as it started up. My phone successfully entered download mode and I was able to use LG Flash Tool 2014 to return my phone to Stock 4.2.2 using this thread and a KDZ I had long ago stored.
Thanks for the help though!
darknessmessiah said:
Hi there! Yes, I got to get it back... But it was this hard
Anyway there goes some tips:
After you remove the battery plug, you only need to put it back after everything is done.
You have to keep trying the short circuit until you get a new hardware called "Qualcomm hs-diagnostics 9006" and you computer recognizes a lot of disk partitions. The normal device my computer recognized was "Qualcomm HS-USB QDLoader 9008" and no tip out there worked.
When the computer recognizes the wrong device, remove the USB, plug it back and try again. One time it recognized one whole 32GB partition, but thankfully I didn't try anything besides removing the USB and try again.
After everything, I got Download Mode back and, after some tries (I've got some errors), got the flashtool to flash the ROM back.
Click to expand...
Click to collapse
jjmontem said:
Wow, that's miserably complicated. And to show you my naivite, I wasn't aware that one could enter download mode by plugging in the phone to a computer with a USB cord, and holding the volume up button as it started up. My phone successfully entered download mode and I was able to use LG Flash Tool 2014 to return my phone to Stock 4.2.2 using this thread and a KDZ I had long ago stored.
Thanks for the help though!
Click to expand...
Click to collapse
Well... You were in a better situation than myself... holding the volume up and plugging the USB didn't work for me either... It was heavily messed up!
hi do you find solution
---------- Post added at 09:53 PM ---------- Previous post was at 09:48 PM ----------
i have same probleme with my lg g F320L can anyone help ?
Hello my friends.
I installed CloudyG2 3.3 to my LG G2. And on this morning, my phone closed. I tried to open but, i can't. The screen stayed at LG logo screen. So i tried to do Hard Reset with buttons. I said Yes-Yes but there was something wrong.. A mistake. (boot certification error) I can't enter TWRP screen.
I tried to install stock rom with Flash Tool. But i can't.. Again.. Because it stuck at %2..
So i can't install stock rom and i can't open my phone. Can anybody help me?
Sorry my bad English.
cemre17 said:
A mistake. (boot certification error) I can't enter TWRP screen.
I tried to install stock rom with Flash Tool. But i can't.. Again.. Because it stuck at %2..
Click to expand...
Click to collapse
First of all power of your phone by long pressing power button until screen light goes off completely
Then keep pressing volume + button and connect it to PC via USB cable. [DOWNLOAD MODE]
Now you must be in download mode, simply flash stock firmware.
If you can't enter download mode then you might be in fastboot mode.
here are some threads..find out which one is related to your problem follow instructions carefully.
[HOW TO] Fix your soft-bricked LG G2 (All Variants)
OR
[FIX] NO Recovery mode, No download mode, after OTA on rooted LG G2
OR
LG G2 is UNBRICKABLE NOW! [FIX REAL HARD BRICK
As you mentioned that you were running a custom ROM prior to this problem then I'm sure that you need not to visit following thread.
Refurbished phones and a few words of caution
Good Luck...!
KASHYAP9 said:
First of all power of your phone by long pressing power button until screen light goes off completely
Then keep pressing volume + button and connect it to PC via USB cable. [DOWNLOAD MODE]
Now you must be in download mode, simply flash stock firmware.
If you can't enter download mode then you might be in fastboot mode.
here are some threads..find out which one is related to your problem follow instructions carefully.
[HOW TO] Fix your soft-bricked LG G2 (All Variants)
OR
[FIX] NO Recovery mode, No download mode, after OTA on rooted LG G2
OR
LG G2 is UNBRICKABLE NOW! [FIX REAL HARD BRICK
As you mentioned that you were running a custom ROM prior to this problem then I'm sure that you need not to visit following thread.
Refurbished phones and a few words of caution
Good Luck...!
Click to expand...
Click to collapse
Thank you my friend for all your answers. In substance;
I can't open my phone. (Staying at LG logo screen.)
I can't do "Hard Reset" with phone buttons. (Because of "boot certification error" screen.)
I can enter "Download Mode" but I can't loading any .KDZ file with Flash Tool. (Stuck at %2)
My computer can't see my phone when I plug that.
Very hard situation. :crying:
cemre17 said:
Thank you my friend for all your answers. In substance;
I can't open my phone. (Staying at LG logo screen.)
I can't do "Hard Reset" with phone buttons. (Because of "boot certification error" screen.)
I can enter "Download Mode" but I can't loading any .KDZ file with Flash Tool. (Stuck at %2)
My computer can't see my phone when I plug that.
Very hard situation. :crying:
Click to expand...
Click to collapse
Reinstall LG drivers and PDA
then connect phone with PC in download mode.
open device manager and search for 'COM ports' list if you see your device there then you are ready to go.
If your device is not there then search under 'Other devices' and manually install drivers.
If you can boot into download mode and still you can't see your device in your PC then it's not problem with your G2. It's your PC which is causing it all.
Try another PC.
KASHYAP9 said:
Reinstall LG drivers and PDA
then connect phone with PC in download mode.
open device manager and search for 'COM ports' list if you see your device there then you are ready to go.
If your device is not there then search under 'Other devices' and manually install drivers.
If you can boot into download mode and still you can't see your device in your PC then it's not problem with your G2. It's your PC which is causing it all.
Try another PC.
Click to expand...
Click to collapse
I reinstalled LG drivers, and i can see "LGE Android MTP Device" in Device Manager and it has no problem. (There is no yellow exclamation mark) But still, my computer can't see my phone. And i tried install stock rom with Flash Tools again but i did not work. Stuck at %2 again.
So to start, I followed this guide, downloaded and flashed the H87320i_00_OPEN_CA_OP_0204 to my phone, the next step was to factory reset the phone but the logo became LG G6ThinQ instead of the regular red LG logo for an LG G6.
The phone is now unrecognizable in every form. It is now LGE AndroidNet USB Serial Port.
The power button works to turn it on after disconnecting battery, but thats it. There is no way to hold pwr+ vol down for fastboot or pwr+ vol up for download. It just boots the phone to the ThinQ logo, and ceases to do anything else.
If anyone can help me, Ive downloaded countless flashing software. LGUP doesnt recognize it as a phone. The model is unknown and the name is [*blank*/COM6].
Any help would be appreciated.
P.S. I also tried shorting the test points to get to 9008 mode, but still nothing.
Follow up, I managed to get the phone into 9008 mode, but none of the firehoses I found would work. I tried multiple flashing tools but they all say 0 bytes were sent. If anyone has the correct firehose for this model it would be appreciated.