Here is the FTF for the (German) unbranded SGP511.
Should work for other countries without problems (I use a Russian FTF for 4.4.2 for a long time).
https://drive.google.com/open?id=0B8TJRHQcfDHKbE1nV2Fyek9STEE&authuser=0
can we root and install custom recovery with nutrecovery with this firmware?
Where's the ultra stamina mode and high resolution audio on this its missing and I want it hence why I ditched root
really hopes that someone will root it and make a flashable version like someone already did with Z2 phone!
Thank you
Ultra stamina mode on the phone turns off all functions except cell reception... Pretty pointless on a tablet.....
Has anyone flashed this over the 4.4.2 firmware then? I'm tempted but no one is talking? I have the 16gb WiFi UK model
I flashed it over 4.4.2 to my 32gb Wi-Fi Uk version, works fine
Does it matter about the 16 or 32gb?
edge3uk said:
Does it matter about the 16 or 32gb?
Click to expand...
Click to collapse
Don't think so the 511 is the 16gb, the 512 (mine) is the 32gb and it works fine :good:
adypem said:
i flashed it over 4.4.2 to my 32gb wi-fi uk version, works fine
Click to expand...
Click to collapse
hi can you tell me how to flash this update? Am coming from samsung and not used to sony interface
I used the guide here......
http://forum.xda-developers.com/showthread.php?t=928343
Flashed this onto a SGP512 (32 GB) and had several problems:
1. Once you flash, the model of your tablet is no longer reported correctly -- your tablet is now listed as SGP511 rather than SGP512, which is the 16GB version of the tablet instead of the 32GB. However, you have full access to the 32GB of storage.
2. This ROM is actually Russian, not German -- you will see messages in Russian until you select your language.
3. There is some strange behavior. Chrome started scrolling at random and then the entire system became unresponsive. It was difficult to switch the system off after that. There was also an NFC firmware upgrade which I found strange.
4. It also seems that EasyRoot does not work on 4.4.4 yet, so you won't be able to root or install a custom recovery.
I decided to downgrade to 314 and wait for the official upgrade. Call me paranoid, but I don't trust this Russian firmware.
Related
Hi guys,
I got a Transformer from China a couple of days ago and I was wondering if it was possible to change the firmware to another version?
I have tried putting the WW firmware as a ZIP file on the SD card but after a few seconds I get the android logo with an exclamation mark in it.
Alternatively, is it possible to get access to the android market with the Chinese firmware? I can't seem to install any non Chinese apps!
Thanks.
I wouldn't 100% recommend doing it but should be possible. I ended up accidentally flashing over the WW firmware onto my US version(file was misnamed) and everything functioned perfectly. In fact it seemed to fix my rebooting issues. here is the link to the files, just follow the instructions. If you manage to brick your TF, i am not responsible though.
http://transformer-rom-development.com
Was in the same situation and just used the flashable version of Prime on it (1.4 at the time) and lived happily after ever since
rosco_pc said:
Was in the same situation and just used the flashable version of Prime on it (1.4 at the time) and lived happily after ever since
Click to expand...
Click to collapse
This sounds like a better idea!
SGP511 - Xperia Z2 TABLET WIFI - GENERIC CA FTF FILE
Android version: 4.4.2
Build number: 17.1.1.A.0.402
Tablet Software Version: 1278-4514_17.1.1.A.0.402 WIFI User
File System Version: GLOBAL_WIFI16G_17.1.1.A.0.402
Customization Version: 1281-7810_R5A
Branding: Generic CA (unbranded)
Country: Canada
Click to expand...
Click to collapse
Note: I've tested this on mine and it seems fine, would appreciate if anyone else can test it to reconfirm, thank you.
Note 2: DO NOT CROSS FLASH THIS WITH THE LTE XPERIA Z2 TABLET. This is made for the WIFI verison of Xperia Z2 Tablet ONLY.
Downloads
Note: Sorry for so many different parts, stupid box does not allow me to upload large files.
Note 2: There are a total of 5 files, please download them all then unzip them with winrar.
Yes! It works for me Device from SG
LitoNi said:
SGP511 - Xperia Z2 TABLET WIFI - GENERIC CA FTF FILE
Note: I've tested this on mine and it seems fine, would appreciate if anyone else can test it to reconfirm, thank you.
Note 2: DO NOT CROSS FLASH THIS WITH THE LTE XPERIA Z2 TABLET. This is made for the WIFI verison of Xperia Z2 Tablet ONLY.
Downloads
Note: Sorry for so many different parts, stupid box does not allow me to upload large files.
Note 2: There are a total of 5 files, please download them all then unzip them with winrar.
Click to expand...
Click to collapse
Any chance someone still has this ftf? I borked my z2 tab today and was looking for the latest firmware to flash that is still rootable. Think this is it. Endpoint will be running cm11 or cm12.
bacon612 said:
Any chance someone still has this ftf? I borked my z2 tab today and was looking for the latest firmware to flash that is still rootable. Think this is it. Endpoint will be running cm11 or cm12.
Click to expand...
Click to collapse
download this buddy: XperiFirm ~ Xperia Firmware Downloader & Checker [v3.1]
no one uploads stock ftf files anymore, it can all be downloaded from that software :highfive:
LitoNi said:
download this buddy: XperiFirm ~ Xperia Firmware Downloader & Checker [v3.1]
no one uploads stock ftf files anymore, it can all be downloaded from that software :highfive:
Click to expand...
Click to collapse
Thank you for this. I managed to get a Chinese 402 fimware downloaded, created an ftf out of it and flashed it successfully. Would be more helpful if this wasn't a Chinese build but its a start.
Edit: I chose 402 as its the latest firmware that is supported by doomlord root and recovery. The endpoint is to be back on CM11/12. Having a tough time as im not able to boot to recovery from the Chinese build. Also seems that there is a possible hardware issue as I am having intermittant connectivity issues with the tablet. It seems to come in and out of flash mode on its own in the flashtool. I am trying to flash a different firmware but it wont stay in flash mode long enough for the firmware flash to complete successfully. Pretty frustrating. I noticed this usb issue while using chargers over the last month or so too. Tablet would show that it was charging for a second then not charging intermittently. I thought it could be rom related which inspired the want to ftf back to stock but i think that there is something physically wrong with this tab now. Shame as its only six months old and was barely used.
bacon612 said:
Thank you for this. I managed to get a Chinese 402 fimware downloaded, created an ftf out of it and flashed it successfully. Would be more helpful if this wasn't a Chinese build but its a start.
Edit: I chose 402 as its the latest firmware that is supported by doomlord root and recovery. The endpoint is to be back on CM11/12. Having a tough time as im not able to boot to recovery from the Chinese build. Also seems that there is a possible hardware issue as I am having intermittant connectivity issues with the tablet. It seems to come in and out of flash mode on its own in the flashtool. I am trying to flash a different firmware but it wont stay in flash mode long enough for the firmware flash to complete successfully. Pretty frustrating. I noticed this usb issue while using chargers over the last month or so too. Tablet would show that it was charging for a second then not charging intermittently. I thought it could be rom related which inspired the want to ftf back to stock but i think that there is something physically wrong with this tab now. Shame as its only six months old and was barely used.
Click to expand...
Click to collapse
wooo bad luck buddy, you should take it back to sony while you still got the chance (under warranty). If you have saved the DRM keys before unlocking the bootloader, you should relock it and flash a stock ftf (Canadian version). i dont know why the OP link doesnt work. but i had just checked my box account and the files are still there the .402 one
SGP511 Wifi Generic CA .402: https://app.box.com/s/o3webtra06yvet2zuva47vka3h981s4l
if the link does not work you either have to create a Box account or give me your email. i dont know why Box is like this.
gl buddy :highfive:
Thanks for the support
I tried again with the box link and it says: "the item you are trying to access has been deleted or is unavailable to you" Ill PM you my address.
Hello all,
I need this FW to flash the kernel of this thread (for CWM recovery + root) :
http://forum.xda-developers.com/showthread.php?p=51690786#post51690786
The link is invalid and I can't find the FTF file elsewhere.
Someone has a link? Thanks.
Hello,
I bought Note 4 (Model: SM-N910F) in Germany, and now running android version
4.4.4, I want to upgrade to the official version 5.0.1 from website:
http://www.sammobile.com/firmwares/database/SM-N910F/
Which version is recommended from the website?
Debating between both versions: Germany or Unknown, Which version is preferable?
And do need root to flash a new version?
I am interested in a clean system with no additives/applications (in English) with good battery time.
Thanks,
idan.
idann said:
Hello,
I bought Note 4 (Model: SM-N910F) in Germany, and now running android version
4.4.4, I want to upgrade to the official version 5.0.1 from website:
Which version is recommended from the website?
Debating between both versions: Germany or Unknown, Which version is preferable?
And do need root to flash a new version?
I am interested in a clean system with no additives/applications (in English) with good battery time.
Thanks,
idan.
Click to expand...
Click to collapse
You don't need root to flash a new firmware.
I would recommend wiping the phone to factory status before you flash a new firmware.
N910F will use the BOC3 software.
This should work okay.
/N910FXXU1BOC3_N910FVFG1BOC2_VDC/
Yes of course, I will implement to make a factory reset before flash new firmware.
BOC3 = Unknown version.
I understand this rom from Dutch, It will be ok? or wait to OTA upgrade?
After upgrade system to 5.0.1, my device will receive OTA?
idann said:
Yes of course, I will implement to make a factory reset before flash new firmware.
BOC3 = Unknown version.
I understand this rom from Dutch, It will be ok? or wait to OTA upgrade?
After upgrade system to 5.0.1, my device will receive OTA?
Click to expand...
Click to collapse
I upgraded a few days ago from N910FXXU1ANK4 ATO 4.4.4 to N910FXXU1BOC3 Unknown and I can say that it's working nicely. Had issues when updating as I was first trying to flash a BOC3 version from RO Vodafone, but had issues while flashing (Volume size too big, Odin invalid ext4 image). I was able to upgrade to N910FXXU1BOC3 Unknown without any issues.
In case you get into trouble while upgrading, you can do a emergency re-initialization from Kies3, based on your model number and serial number (on device, under the battery).
If you are flashing a different region ROM, make sure you do not have Reactivation lock as it will block your attempt to flash a new ROM.
@lolozaur thanks about information.
Version N910FXXU1BOC3 (5.0.1) will include touchwiz interface?
I prefer a clean system like nexus version, can you recommend a convenient interface (launcher)?
idann said:
@lolozaur thanks about information.
Version N910FXXU1BOC3 (5.0.1) will include touchwiz interface?
I prefer a clean system like nexus version, can you recommend a convenient interface (launcher)?
Click to expand...
Click to collapse
Don't have much information regarding the Note 4 ROM community as i just got the device one week ago.
But, if you want to keep your Knox counter set to 0 and have your warranty available, you have to flash only stock ROMs from good sources (i prefer sammobile).
I personally like the new Touchwiz on 5.0.1 and I think it will keep getting better when we'll get the S6 Touchwiz in future updates. I would not flash an AOSP ROM on the Note 4.
Not sure about this but if you want an AOSP OS (nexus version) you will be losing some of the functionality of the Note 4, such as the S-Pen and S-Note integration and maybe the S-Health and Heartrate sensor.
@lolozaur
Flash of new version 5.0.1 can lock again device for locked region?
The lock was released by call (5 minutes) with local microsim.
Thanks.
idann said:
@lolozaur
Flash of new version 5.0.1 can lock again device for locked region?
The lock was released by call (5 minutes) with local microsim.
Thanks.
Click to expand...
Click to collapse
It should not lock. My device is also used outside the unlock region and I did not have any troubles after the upgrade.
I am flashing 5.0.1 and looks good! even touchwiz interface looks clean.
Thank you for your kind assistance.
hello XDA members
I have the samsung tab s2 T715 from Emirates
I did manually check for an update today and got this in the picture
Have fun
Cool hoping 815 follows
Sent from my SM-G935F using XDA-Developers Legacy app
Hello.
I have a German unbranded device.
Since I did not want to wait for Samsung I installed the update myself by getting the already released version they seed in Italy since a few days.
Almost the same. Lte and German Sim card working, everything like if is supposed to. I think installing the Italian update is not a problem.
Works like a charm. Much faster then before. Some screens are following. I can recommend it to everyone that doesn't want to longer. St least for me there's is no problem.
StilleWaesser said:
Hello.
I have a German unbranded device.
Since I did not want to wait for Samsung I installed the update myself by getting the already released version they seed in Italy since a few days.
Almost the same. Lte and German Sim card working, everything like if is supposed to. I think installing the Italian update is not a problem.
Works like a charm. Much faster then before. Some screens are following. I can recommend it to everyone that doesn't want to longer. St least for me there's is no problem.
Click to expand...
Click to collapse
Is a factory reset needed? Or can you keep all your apps and settings?
Slurm said:
Is a factory reset needed? Or can you keep all your apps and settings?
Click to expand...
Click to collapse
All kept like normal update OTA. Just in download mode, installed update, took less then 5 Minutes and everything like before, except new Android version. Pretty smooth.
StilleWaesser said:
All kept like normal update OTA. Just in download mode, installed update, took less then 5 Minutes and everything like before, except new Android version. Pretty smooth.
Click to expand...
Click to collapse
Great, I think I'll update too!
Some more pictures
StilleWaesser said:
Hello.
I have a German unbranded device.
Since I did not want to wait for Samsung I installed the update myself by getting the already released version they seed in Italy since a few days.
Almost the same. Lte and German Sim card working, everything like if is supposed to. I think installing the Italian update is not a problem.
Works like a charm. Much faster then before. Some screens are following. I can recommend it to everyone that doesn't want to longer. St least for me there's is no problem.
Click to expand...
Click to collapse
Is your device a T715 or T715Y? Does it even make any difference? I have a T715Y (imported from China, I think) and have downloaded the Nougat ROM (which is noted as being for T715 (but not specifically fore the T715Y) from Sammobile and tried installing it using Odin 3.12 but it fails. I also tried using Odin 3.11 which also fails. Both ran as Administrator.
Current ROM Build Number is T715YDXU2BPJ1
Can anyone give me some idea of where I might be going wrong?
GrandMasterPlank said:
Is your device a T715 or T715Y? Does it even make any difference? I have a T715Y (imported from China, I think) and have downloaded the Nougat ROM (which is noted as being for T715 (but not specifically fore the T715Y) from Sammobile and tried installing it using Odin 3.12 but it fails. I also tried using Odin 3.11 which also fails. Both ran as Administrator.
Current ROM Build Number is T715YDXU2BPJ1
Can anyone give me some idea of where I might be going wrong?
Click to expand...
Click to collapse
I think you need a rom for your device (https://www.sammobile.com/firmwares/database/SM-T715Y/).
For me the update with the italian version worked great and I now have a german-austrian-italian S2 :laugh:
I have sm t 715 without y. Differences between the both devices I don't know but I'd suggest you wait until the proper firmware is release for your device. As far as I see there is no android 7 rolled out four your device.
Any ETA on Android 7.0 for the real SM-T715Y? Does anybody know anything?
I got the SM-T710 XSA Nougat update some time ago now. But I bought the 4G version off Gumtree and it is still stuck with 6.0.1 which means the lowlife carriers are probably halting the updates.
It is disgusting. With carrierless Samsung Galaxy smartphones, Samsung waits for the carriers in XSA region to start to release their crapware, before they release the official Samsung firmware. I do not know if this occurs in other regions.
FYI, the SM-T715Y is the real Tab S2. The SM-T715 has very few firmware regions and was probably made for dodgy countries with outdated cell towers. Look them up on sammobile.com/firmwares
Thanks people!
Hi,
I've loved the colour screen changes but since my EPD is messed up from the 6.0 update, I havent used it at all.
I would go back to 5.x but I didnt like how hot it got with that so my best bet is to go back to 4.4
Problem now is that yotadevices' ftp is down so yotaflasher doesnt work.
Does someone have the latest 4.4.x rom so I can flash it through twrp?
Seems like Yota is cleaning the slate for Yotaphone 3. As for the firmware, download it from below and decompress it in the 'firmware' folder where the Yota Flasher is installed. Follow the instructions of the installer.
Here you go:
Yotaphone 2 Kitkat 4.4.3 HK
is this same software as in yd206 from gearbest
master volume said:
is this same software as in yd206 from gearbest
Click to expand...
Click to collapse
I can't say about that, though it's the official HK release from Yotaphone site ftp.fw.ydevices.com when it was online.
I am trying to find the 4.4.4 firmware version but I can't. Maybe it s because what you say that yotaphone are erasing the old files for the new model.Can any one help me with a link for the 4.4.4 firmware? I have a YD206 version, but I am no sure if its important.
Thanks
eReader Fan said:
I am trying to find the 4.4.4 firmware version but I can't. Maybe it s because what you say that yotaphone are erasing the old files for the new model.Can any one help me with a link for the 4.4.4 firmware? I have a YD206 version, but I am no sure if its important.
Thanks
Click to expand...
Click to collapse
Kitkat remained briefly on my phone, so I did not update to 4.4.4. I hope someone might still have this lying around.
I just searched a torrent options and I found a 36GB ONE, which has dozens of firmwares for every flavor (HK, CN, RU, EUR,...), and no one has the 4.4.4. If some one have a link of the image and can upload to somewhere I would be gratefull
My firm is from HK. Why is everybody moving to the RU? It's because tis (I think) the most attented one? And the last questions.... When you move to a RU version it appears in an easy way to change it to english language?
Many thanks
Try this page
Many thanks glasseffects, but there aren't any 4.4.4 furmware version there, in any world region. It seems it just desapeared from internet
That seems to be the case. I haven't encountered it either, though 4.4.3 wasn't bad either in contrast to Lollipop, which was catastrophic.