Related
Hello
this is a guide how to make your internal storage 2GB
i have it since i get my phone and i have try OEX OXYGEN MIUI CM7 ICS almost all rom with no problem.
the change is permanent thats wy i will give you and a way to go back to original partition.
Instructions:
1. Backup your Internal 2G Storage, doing this will erase the internal 2G data.
2. Download the attached partition.zip to EXTERNAL SDcard, make sure there are enough space in EXTERNAL SDcard (depends on your data partition size, around 600MB is enough).
3. Disable APP2SD, DATA2EXT, SWAP.(if have)
4. Boot into recovery, do not clear/wipe, flash this package directly, same as flashing a ROM.
5. After flashing go to advanced options, choose to reboot to recovery.
6. Go into recovery again, do not clear/wipe, flash this package again directly, same as flashing a ROM.
7. Reboot device. Done. All data will be kept, no data lose, all remains the same as before, but the storage space has been changed.
Characteristics:
1. Data storage space expanded to 1.2G, internal storage space squeezed to 1.46G (you can use custpartition.bat custom your size).
2. Data storage space is expanded permanently, no matter what ROM you are going to flash, including official ROM!
3. No side-effects, very safe.
How It Works:
Changed the Huawei internal 4G ROM partition solution, squeezed 2G space to 1.46G, leftovers are given to data storage.
This is cooperation work with 凡人 from 5irom, thanks for his bravery to test it out, otherwise I will not take this step ahead, you know it is money, bricking is scaring!
thanks simplistian provide me a U8800H partition table,and translate!
This is not a ROM, this is an upgrade package, you can treat it as a simple partition solution.
1.2G DATA + 1.46G INTERNAL SD upgrade package:
http://www.mediafire.com/?dyz4uqz5a30cypy
return-to-stock partition solution upgrade package:
http://www.mediafire.com/?x72e6p4hvo3adhj
Custom Partition tool:
useage:
1. download this tool and unzip to any directory 2. run custpartition.bat, follow the prompts to enter the number 3. and custpartition.bat positions will generate the partition file 4. replace the same file in the package 5. flash the zip pack, OK!
http://www.mediafire.com/?m1nqg1y4gp5szp5
For 2 GB just plase this file to your sdcard and instal with clockworkmod
http://www.2shared.com/file/7nuHX81l/2G_online.html
to go back to original just plase this file to your sdcard and instal with clockworkmod
http://www.2shared.com/fadmin/36049963/30fc3914/offical-partition.zip.html
so simple
GR pic http://postimage.org/image/gf3e7n4a9/
ENG pic http://postimage.org/image/g33z7tjch/
I MUST SAY THAT THIS GUIDE IT'S NOT MINE. I JUST METION IT AGAIN.
A BIG THANKS TO THE OWNER OF THE GUIDE BUT I HAVE IT FOR
SO LONG TIME THAT I DONT REMEBER WHO HAS WRITE THIS.
ANY WAY THANKS A LOT.
Anybody can verify this?
Sent from my Huawei Ideos X5 using Tapatalk 2
Any one tried this????
Click THANKS if this helped or you liked my post.
Will b Honored
Sent from a Samsung Galaxy phone via XDA Premium.
2g internal means "ROM will be 2g"? ROM stock is 600mb right? And flash this rom will be 2g? wow, fanstatic baby!
»»Sent From My U8800««
I tested its working.but I had to reinstall ROM. Should backup before installing.
Sent from my U8800 using xda premium
it is working 100% but normaly you didnt need to reinstal the rom.
:good:
Instructions:
1. Backup your Internal 2G Storage, doing this will erase the internal 2G data.
2. Download the attached partition.zip to EXTERNAL SDcard, make sure there are enough space in EXTERNAL SDcard (depends on your data partition size, around 600MB is enough).
3. Disable APP2SD, DATA2EXT, SWAP.(if have)
4. Boot into recovery, do not clear/wipe, flash this package directly, same as flashing a ROM.
5. After flashing go to advanced options, choose to reboot to recovery.
6. Go into recovery again, do not clear/wipe, flash this package again directly, same as flashing a ROM.
7. Reboot device. Done. All data will be kept, no data lose, all remains the same as before, but the storage space has been changed.
socioan said:
it is working 100% but normaly you didnt need to reinstal the rom.
:good:
Instructions:
1. Backup your Internal 2G Storage, doing this will erase the internal 2G data.
2. Download the attached partition.zip to EXTERNAL SDcard, make sure there are enough space in EXTERNAL SDcard (depends on your data partition size, around 600MB is enough).
3. Disable APP2SD, DATA2EXT, SWAP.(if have)
4. Boot into recovery, do not clear/wipe, flash this package directly, same as flashing a ROM.
5. After flashing go to advanced options, choose to reboot to recovery.
6. Go into recovery again, do not clear/wipe, flash this package again directly, same as flashing a ROM.
7. Reboot device. Done. All data will be kept, no data lose, all remains the same as before, but the storage space has been changed.
Click to expand...
Click to collapse
Im using miui, and if i flash this, can i flash ics or cm7 or back to stock rom without issue?
»»Sent From My U8800««
Working great! But I did not have a chance to see if it really does need reflashing ROM since I played it safe by backing-up and restoring thru CMW
Sent from my Huawei Ideos X5 using Tapatalk 2
lemonade747 said:
Im using miui, and if i flash this, can i flash ics or cm7 or back to stock rom without issue?
»»Sent From My U8800««
Click to expand...
Click to collapse
Yes you can flash any rom original or custom
socioan said:
Yes you can flash any rom original or custom
Click to expand...
Click to collapse
Yes, thank you, now i know this is internal storage, i call it "usb storage", lol
»»Sent From My U8800««
lemonade747 said:
1 more question: if flash this, 2g usb storage will = 0mb and will be formated and internal (ROM) = 2gb, right? 2g usb storage i mean in photo below:
»»Sent From My U8800««
Click to expand...
Click to collapse
It will be about 800mb
socioan said:
It will be about 800mb
Click to expand...
Click to collapse
Wow, fanstatic, im going to flash this, but which link I dont know much, first or second link below???
-THIS-
1.2G DATA + 1.46G INTERNAL SD upgrade package:
http://www.mediafire...dyz4uqz5a30cypy
(I cant go to this link)
-OR-
For 2 GB just plase this file to your sdcard and instal with clockworkmod
http://www.2shared.com/file/7nuHX81l/2G_online.html
And it works on u8800 and u8800 pro right? I will give it to my friend
»»Sent From My U8800««
new link
lemonade747 said:
Wow, fanstatic, im going to flash this, but which link I dont know much, first or second link below???
-THIS-
1.2G DATA + 1.46G INTERNAL SD upgrade package:
http://www.mediafire...dyz4uqz5a30cypy
(I cant go to this link)
-OR-
For 2 GB just plase this file to your sdcard and instal with clockworkmod
http://www.2shared.com/file/7nuHX81l/2G_online.html
And it works on u8800 and u8800 pro right? I will give it to my friend
»»Sent From My U8800««
Click to expand...
Click to collapse
You are right my friend- the link is incomplete, but should be: http://www.mediafire.com/?dyz4uqz5a30cypy
you may check over here: http://forum.xda-developers.com/showthread.php?t=1112857
Amazing! My phone loses all data! :thumbdown:
»»Sent From My U8800««
lemonade747 said:
Amazing! My phone loses all data! :thumbdown:
»»Sent From My U8800««
Click to expand...
Click to collapse
Of course it does. It is clearly stated on the thread that you will loose all data in internal storage.
Sent from my Huawei Ideos X5 using Tapatalk 2
does it work on U8800Pro with ICS official 928?...
ilciumbia said:
does it work on U8800Pro with ICS official 928?...
Click to expand...
Click to collapse
sorry i cant help you beacuse i haven't test it. my phone is U8800.
80% it works because it only change the partition size of internal storage.
google a litle bit something you will find.
good luck.
Instructions:
1. Backup your Internal 2G Storage, doing this will erase the internal 2G data.
2. Download the attached partition.zip to EXTERNAL SDcard, make sure there are enough space in EXTERNAL SDcard (depends on your data partition size, around 600MB is enough).
3. Disable APP2SD, DATA2EXT, SWAP.(if have)
4. Boot into recovery, do not clear/wipe, flash this package directly, same as flashing a ROM.
5. After flashing go to advanced options, choose to reboot to recovery.
6. Go into recovery again, do not clear/wipe, flash this package again directly, same as flashing a ROM.
7. Reboot device. Done. All data will be kept, no data lose, all remains the same as before, but the storage space has been changed.
Characteristics:
1. Data storage space expanded to 1.2G, internal storage space squeezed to 1.46G (you can use custpartition.bat custom your size).
2. Data storage space is expanded permanently, no matter what ROM you are going to flash, including official ROM!
3. No side-effects, very safe.
Is there any difference between this and http://forum.xda-developers.com/showthread.php?t=1112857 this one?
hello all.
i have HTC desire with stock ROM v 2.2 and i have rooted my phone and flashed the CM10 | Jelly Bean 4.1.2 - v3.1 which supports a2sd script and allow to install many app in the SD-ext partition but there were some problems in the battery drain . video play back flickering and video recorder so i restored my original stock ROM it is very fast and no the jellybean's issues but the only problem is limited internal memory so i need your help to have a2sd script or any script to overcome this problem
thanks.
Use any non sense gingerbread ROM if u want speed + battery life.
I would recommend using milwilds redux or oxygen ROM. They have a2sd built in and activated, so all u need to is flash the rom if you have already made the partition.
Sent from my HTC Desire using xda app-developers app
chromium96 said:
Use any non sense gingerbread ROM if u want speed + battery life.
I would recommend using milwilds redux or oxygen ROM. They have a2sd built in and activated, so all u need to is flash the rom if you have already made the partition.
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
thanks chromium but i want any solution on the stock ROM i don't wanna flash any other ROM thanks again fo your help and hope more help further .
elta7an said:
thanks chromium but i want any solution on the stock ROM i don't wanna flash any other ROM thanks again fo your help and hope more help further .
Click to expand...
Click to collapse
u shoulda just flashed a pre rooted stock rom which would be less bloated + a2sd
jmcclue said:
u shoulda just flashed a pre rooted stock rom which would be less bloated + a2sd
Click to expand...
Click to collapse
can you clear i can't understand you i am beginner not professional.
thx for Ur patience
elta7an said:
can you clear i can't understand you i am beginner not professional.
thx for Ur patience
Click to expand...
Click to collapse
You need to flash a stock ROM that comes pre rooted. From there you can install an a2sd script.
I would really recommend a custom gingerbread ROM though. It looks like you just had a bad experience with the new jb ROMs, but trust me the GB roms are good. they are fast, stable, and optimized from a2sd.
chromium96 said:
You need to flash a stock ROM that comes pre rooted. From there you can install an a2sd script.
I would really recommend a custom gingerbread ROM though. It looks like you just had a bad experience with the new jb ROMs, but trust me the GB roms are good. they are fast, stable, and optimized from a2sd.
Click to expand...
Click to collapse
OK chromium i will trust u :laugh: and waiting to recommend GB ROM that you have tried before and sorry to tell me also the steps of flashing of it and optimizing of a2sd.
very appreciated for your help.
elta7an said:
OK chromium i will trust u :laugh: and waiting to recommend GB ROM that you have tried before and sorry to tell me also the steps of flashing of it and optimizing of a2sd.
very appreciated for your help.
Click to expand...
Click to collapse
1. Partition your sd card using this guide if you havent already done so.
2. Download Mildwild v4.9 based on Oxygen from here. Then copy the zip to your sdcard
3. Reboot into recovery. If you are using cwm recovery do the following: wipe data/factory reset, wipe cache partition, go to advanced and wipe dalvik cache. If using 4ext recovery go to the wipe menu and select "format all partitions (except sd card)"
4. Then go to install and choose the zip of the rom you previously copied to the sd card. Once it has successfully flashed, reboot
5. Leave it for about 5 minutes to load everything up (the first boot may take up to 10 min so be patient)
6. If you made the partition correctly in step 1, whenever you install an app it will automatically be moved to the sd card ext partition.
@OP, if u r going to use MildWild Oxygen (very good rom) then i would highly recommend changing hboots (if ur s-off) to get the most space for data partition, otherwise ul be wasting over 100mb in system partition.
chromium96 said:
1. Partition your sd card using this guide if you havent already done so.
2. Download Mildwild v4.9 based on Oxygen from here. Then copy the zip to your sdcard
3. Reboot into recovery. If you are using cwm recovery do the following: wipe data/factory reset, wipe cache partition, go to advanced and wipe dalvik cache. If using 4ext recovery go to the wipe menu and select "format all partitions (except sd card)"
4. Then go to install and choose the zip of the rom you previously copied to the sd card. Once it has successfully flashed, reboot
5. Leave it for about 5 minutes to load everything up (the first boot may take up to 10 min so be patient)
6. If you made the partition correctly in step 1, whenever you install an app it will automatically be moved to the sd card ext partition.
Click to expand...
Click to collapse
Thanks Chromium.
but in your opinion what's the best size of created Ext for this Rom and what about swap .am using CWM v4.0.1.4 and have partitioned Sd card on it with 2048m as Ext 3 ?
after flashing this ROM will i use terminal emulator to activate a2sd script or it will activate automatically ??
Sorry for inconvenience chromium
jmcclue said:
@OP, if u r going to use MildWild Oxygen (very good rom) then i would highly recommend changing hboots (if ur s-off) to get the most space for data partition, otherwise ul be wasting over 100mb in system partition.
Click to expand...
Click to collapse
thanks jmcclue .
I can't understand clearly but already i have Hboot-6.93.1002 and radio-5.11.05.27 is this what u mean ?
elta7an said:
Thanks Chromium.
but in your opinion what's the best size of created Ext for this Rom and what about swap .am using CWM v4.0.1.4 and have partitioned Sd card on it with 2048m as Ext 3 ?
after flashing this ROM will i use terminal emulator to activate a2sd script or it will activate automatically ??
Sorry for inconvenience chromium
Click to expand...
Click to collapse
elta7an said:
thanks jmcclue .
I can't understand clearly but already i have Hboot-6.93.1002 and radio-5.11.05.27 is this what u mean ?
Click to expand...
Click to collapse
First of all dont use cwm to make the partition. Read this guide to learn how to correctly make the partition. You can easily install 4ext recovery which is better than cwm and it will make good partitions. I would recommend a 1gb ext4, and no swap. After flashing the rom, a2sd will be already activated so theres no need to use terminal emulator to do anything.
Jmcclue is suggesting that you use a different hboot (internal memory partition layout). Using stock hboot with mildwilds oxygen rom, you will be wasting more than 100mb on the system partition. If you want to optimize the internal partition layout so that you have the most space on on the data partition, it would be wise to use the cm7r2 hboot, or even one of the custom hboots that jmcclue has made (check his signature).
chromium96 said:
First of all dont use cwm to make the partition. Read this guide to learn how to correctly make the partition. You can easily install 4ext recovery which is better than cwm and it will make good partitions. I would recommend a 1gb ext4, and no swap. After flashing the rom, a2sd will be already activated so theres no need to use terminal emulator to do anything.
Jmcclue is suggesting that you use a different hboot (internal memory partition layout). Using stock hboot with mildwilds oxygen rom, you will be wasting more than 100mb on the system partition. If you want to optimize the internal partition layout so that you have the most space on on the data partition, it would be wise to use the cm7r2 hboot, or even one of the custom hboots that jmcclue has made (check his signature).
Click to expand...
Click to collapse
Thanks chromium
am afraid about jmcclue's suggestion because i don't understand this topic clearly and have no experience in it
is this changing in hboot is safe for my device ????????
elta7an said:
Thanks chromium
am afraid about jmcclue's suggestion because i don't understand this topic clearly and have no experience in it
is this changing in hboot is safe for my device ????????
Click to expand...
Click to collapse
OK hboot is the layout of partition sizes on the internal memory. There are 3 partitions: system, cache and data.
Stock hboot gives 250mb to system which is way too much because mildwilds oxygen rom only needs 110mb.
Since you are wasting 140mb on system, you get less space on data(to store app data on)
With cm7r2 hboot u get 145mb system partition, and more space on data.
Changing hboot is pretty easy, but i guess u could say its more risky than flashing a rom. Its not mandatory to do it but it would make sense to do so. Its your choice.
If you leave it with stock hboot everything will work fine, but your data partition will fill up faster. If you aren't planning on installing more than 50 apps then stock should be fine. If you want the ability to install lots of apps (more than 50) then install cm7r2.
How many apps do u think you will install?
Sent from my HTC Desire using xda app-developers app
chromium96 said:
OK hboot is the layout of partition sizes on the internal memory. There are 3 partitions: system, cache and data.
Stock hboot gives 250mb to system which is way too much because mildwilds oxygen rom only needs 110mb.
Since you are wasting 140mb on system, you get less space on data(to store app data on)
With cm7r2 hboot u get 145mb system partition, and more space on data.
Changing hboot is pretty easy, but i guess u could say its more risky than flashing a rom. Its not mandatory to do it but it would make sense to do so. Its your choice.
Click to expand...
Click to collapse
I will change my hboot but i don't know which one can i install to work with the Rom and the method of installation.
i have read the jcullum's thread of custom hboots and downloaded the custom hboots but there are many files and can't differentiate between them which is the more suitable to my device and which is the proper method for installing it
which i can understand it.is too move any hboot.img from any folder to SD card and flash it from recovery ?
if this right ? i wanna recommendation to the proper one for this ROM and more safe definitely
chromium96 said:
How many apps do u think you will install?
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
may be more than 30 app but more of them is small sized app. the big one is Facebook app,messenger,maps,viber,weechat,and whatsapp
the another ones are some widgets and small sized apps plus to officesuite and youtube
No u don't flash any hboot files through recovery. This is how to flash the hboot:
1. Go to http://alpharev.nl/ and download the PB99IMG for the cm7r2 hboot.
2. Once it has downloaded, rename it to PB99IMG and put it on the root of your sd card (not in any folders)
3. Boot into hboot(volume down + power). Wait a bit while it searches for the file
4. When it finds the file it will ask if you want to install. Press volume up to install. The reboot.
chromium96 said:
No u don't flash any hboot files through recovery. This is how to flash the hboot:
1. Go to http://alpharev.nl/ and download the PB99IMG for the cm7r2 hboot.
2. Once it has downloaded, rename it to PB99IMG and put it on the root of your sd card (not in any folders)
3. Boot into hboot(volume down + power). Wait a bit while it searches for the file
4. When it finds the file it will ask if you want to install. Press volume up to install. The reboot.
Click to expand...
Click to collapse
Arabic Language issue in this Rom :crying:
also downloaded Arabic pack and useless
elta7an said:
Arabic Language issue in this Rom :crying:
also downloaded Arabic pack and useless
Click to expand...
Click to collapse
Try downloading this arabic support zip onto your sdcard. Then boot into recovery and flash it.
HI there people, just a n00b question, after flashing a custom rom in my i9500 (wanam lite v1.8) i see all my previous configurations, data, installed apps (including bloatware) are still on my phone, is this the normal condition? i mean....when u flash a custom rom previous apps and data keeps on the phone??? or im missing something (like cleaning cache or something)?? i just followed the custom's rom developer guide (download rom, backup current firmware, flash custom rom, enjoy) I supposed a new installation of all system's components was performed when flashing....any info will be appreciated.. thanks
Did you flash via Odin or Recovery?
There is option in custom recovery and in some rom installations that wipe yuor data before install. Fr custom recovere you can make wipe itsefl
Sent from my GT-I9505 using Tapatalk 2
Crauze said:
Did you flash via Odin or Recovery?
Click to expand...
Click to collapse
I've used CMW recovery 6.0.3.2
damador said:
There is option in custom recovery and in some rom installations that wipe yuor data before install. Fr custom recovere you can make wipe itsefl
Sent from my GT-I9505 using Tapatalk 2
Click to expand...
Click to collapse
This is one of the rom's features WanamLite v1.8 that i've flashed " Auto wipe cache & dalvik-cache before flashing", however whole apps and data r still on my phone after flashing.
tongueofcolicab said:
HI there people, just a n00b question, after flashing a custom rom in my i9500 (wanam lite v1.8) i see all my previous configurations, data, installed apps (including bloatware) are still on my phone, is this the normal condition? i mean....when u flash a custom rom previous apps and data keeps on the phone??? or im missing something (like cleaning cache or something)?? i just followed the custom's rom developer guide (download rom, backup current firmware, flash custom rom, enjoy) I supposed a new installation of all system's components was performed when flashing....any info will be appreciated.. thanks
Click to expand...
Click to collapse
1) Download ROM and put it in the SD card.
2) Make a backup.
3) Wipe Data Factory.
4) Wipe cache partition.
5) Advanced -> Wipe Dalvik Cache.
6) Mount and storage -> Format Data
7) Mount and storage -> Format Cache
8) Mount and storage -> Format System
9) Mount and storage -> Format Preload ( If it is present ).
10 ) Flash custom roms.
Chuck Bartowski said:
1) Download ROM and put it in the SD card.
2) Make a backup.
3) Wipe Data Factory.
4) Wipe cache partition.
5) Advanced -> Wipe Dalvik Cache.
6) Mount and storage -> Format Data
7) Mount and storage -> Format Cache
8) Mount and storage -> Format System
9) Mount and storage -> Format Preload ( If it is present ).
10 ) Flash custom roms.
Click to expand...
Click to collapse
Hi there and thanks,
1) In step 1 u mean Internal sdcard or external sdcard?? (or maybe it doesnt matter).
2) Now if i want to return to my previous rom (the one before wanamlite flashing) If i restore to the previous nandroid backup using CWM recovery after the process u mention (wipe & format) all my old data and apps will be there right??
tongueofcolicab said:
Hi there and thanks,
1) In step 1 u mean Internal sdcard or external sdcard?? (or maybe it doesnt matter).
2) Now if i want to return to my previous rom (the one before wanamlite flashing) If i restore to the previous nandroid backup using CWM recovery after the process u mention (wipe & format) all my old data and apps will be there right??
Click to expand...
Click to collapse
1) It doesn't matter.
2) Yes.
Chuck Bartowski said:
1) It doesn't matter.
2) Yes.
Click to expand...
Click to collapse
1). It DOES matter... You are wiping internal storage... What are you gonna flash when the rom on the internal storage is wiped with ALL the other Data?
it a special feature of the ROM ur trying to install..... wannam 1.8 says - no wipe - hence it only wipes dalvik and regular cache - all the user data is preserved, like apps, contact, sms , etc, etc, - you wouldn't even need a backup when moving to wannam 1.8 ROM.
if u want to start from a clean system i recommend using the Super.Wipe (its comes available on the Phoenix ROM thread)
Cheers
ultramag69 said:
1). It DOES matter... You are wiping internal storage... What are you gonna flash when the rom on the internal storage is wiped with ALL the other Data?
Click to expand...
Click to collapse
With Clockwork Recovery you don't touch the internal storage, unless you use "Mount and Storage -> Format Internal SD" ( or something like that ).
Sent from my GT-I9500 using Tapatalk 4 Beta
Unless you really try - you won't format the internal SD with CWM. the clean cache is a command that cleans the OS partition - but if you'll format the internal SD you'll loose all data and apps
infact - what are you trying to do? do you want to completely wipe your device?
Thanks to all for your answers........finally i perform a new clean installation, wiping all data and cache and formating all the /data, /cache, /preload, including internal sdcard (moving rom to external sdcard first of course) and next flashing WanamLite using CMW.
By the way, i was wonder about i9500 suppose to be a 16 GB (internal memory) phone, however......even with a new clean installation internal memory its just about 8.77 GB, am not talking about free space (wich is 6.9 GB now after clean install), the whole internal memory capacity is just 8.77 GB!!! so what about the other 7.x GB in this model???
Hi Guys,
I am presently using Galaxy S4 OzcanRom v6.0 , and I want to upgrade it to v6.2. The procedure to install tells me to wipe davik and format data. So just wanted to know , if my apps that I downloaded (installed in internal sd card ) , will be deleted when I go for the upgrade .
If yes, then how do I simple upgrade to lastest ROM without losing my data. I am new to flashing . Please help me with detail process to upgrade my ROM.
Thank you in advance.
prat_merc said:
Hi Guys,
I am presently using Galaxy S4 OzcanRom v6.0 , and I want to upgrade it to v6.2. The procedure to install tells me to wipe davik and format data. So just wanted to know , if my apps that I downloaded (installed in internal sd card ) , will be deleted when I go for the upgrade .
If yes, then how do I simple upgrade to lastest ROM without losing my data. I am new to flashing . Please help me with detail process to upgrade my ROM.
Thank you in advance.
Click to expand...
Click to collapse
Hi mate,
Yes it will mate , as the description says
Fully Clean Rom installation Step:
Use TWRP
First things first – Backup your data
1 - Download Rom and put it into SD card or ExtSdCard
2 - Select Wipe on TWRP menu
3 - Select Advanced Wipe - select Dalvik Cache, Cache, System, Data,Preload,(If rom is in external sd card select internal sd card too,
otherwise do not choose internal storage.) then select wipe
4 - Format Data and input yes
5 - Reboot - Select Recovery – It will ask you to install super su. Select “do not install” because it has already been installed in the Rom.
6 - Install - Select rom and install
MAX 404 said:
Hi mate,
Yes it will mate , as the description says
Fully Clean Rom installation Step:
Use TWRP
First things first – Backup your data
1 - Download Rom and put it into SD card or ExtSdCard
2 - Select Wipe on TWRP menu
3 - Select Advanced Wipe - select Dalvik Cache, Cache, System, Data,Preload,(If rom is in external sd card select internal sd card too,
otherwise do not choose internal storage.) then select wipe
4 - Format Data and input yes
5 - Reboot - Select Recovery – It will ask you to install super su. Select “do not install” because it has already been installed in the Rom.
6 - Install - Select rom and install
Click to expand...
Click to collapse
Thank you for the reply. I know the above process , but have certain doubts .
When you say backup data, will nandroid backup work, when I am upgrading ROM to different version and will all my apps be recovered. If there is an elegant way . Please let m e know.
Secondly , I dont have TWRP, I installed using CWM, how will it make a difference.
How do i upgrade without losing data.
Thanks.
prat_merc said:
Thank you for the reply. I know the above process , but have certain doubts .
When you say backup data, will nandroid backup work, when I am upgrading ROM to different version and will all my apps be recovered. If there is an elegant way . Please let m e know.
Secondly , I dont have TWRP, I installed using CWM, how will it make a difference.
How do i upgrade without losing data.
Thanks.
Click to expand...
Click to collapse
Hi,
To recover your apps and contacts use something likeTitanium back up . restore only apps and data no system settings ,
What recovery do you have ? philz?
from philz you have the option factory reset/install new rom , you can choose that or from the mount and restore menu format each one by hand
Nandroid first , back up your efs folder.
Shendu OS For Lava iris 504Q port by naeem210
Pre-rooted
Only 244 mb
Better ram management
Better battery backup
Otg Working
Flipcaver Lock Working
And Many More
Installation :
Copy zip file Sd Card
Reboot into recovery
Wipe data/factory reset
Wipe cache partition
Wipe dalvike cache
Wipe system
Select zip from SD card and install
Caution:
I am NOT responsible for any damage caused to your device. Flash at your own Risk!
Download Link Full Rom:-
https://docs.google.com/uc?id=0B2Ddi-DetFSLLS1qdlhPNHBUbnc&export=download
Credits:
anatoli621
4pda
mee porting and testing 504q
HIT THANKS IF YOU LIKE THE ROM.....................
around 600 mb ram free
sounds really goood
great sir
Great Work Naeem Sir..