Related
The main Samsung Approved Service Center here in Kenya has just given up on my SGS 1900 UK Model Nov 2010, originally 2.1 firmware upgrade via KIES to Froyo 2.21 in March 2011. They have handed it back unfixed after a week. Cant find a problem like this on any forum/google. Can find one that is fixable with the resistor jig, but Samsung dealer says his jigs don't help:
1) Press power, on comes B&W Samsung GT I900 screen, then the mosaic graphic that resolves to the glowing big "S". Then it buzzes feebly. Eventually it goes black but keeps buzzing now and then. Power off works.
If you poke around trying to get it into 3 touch reset, the Menu and Back keys light up and stay lit.
2) 3 Touch reset will not work. Dunno if it ever did as never tried before.
3) Plug into USB charger, it charges fine and shows the charger icon.
4) Plug into KIES and after a lot of attempts, KIES identifies it + firmware and connects. I can see and save my contacts and it displays CONTACTS, INTERNAL SD and CALENDAR folders in KIES. No more
5) ODIN ( which I dunno how 2 use but have) sees the SGS's COM when I plug it to my comp.
6) The dealer claims to have tried to resart/reflash with Samsung jigs. He has handed it back with a "cant fix".
What the heck is going on here? Looks like I have lost a few hundred bucks and have to throw it away.
When did this start? Phone was working perfectly. Suddenly a solid red icon with large white star labelled "Web Page" appeared on home page but no such App was found in SETTINGS>ETC. In any case, "Web Page" just led me to a totally innocuous page I use all the time as a homepage on INTERNET app. A few starts and shutdowns after that ( the battery was getting low so swx'd on and off like 3 times over an hour), it just went into (1) above.
Phone is STOCK, no mods, no reflashes,no rooting etc
Thanks
Peter in Darkest Africa
if odin can 'see' you handset, have you tried flashing the ROM again? find a stock froyo rom from one of the threads here in the general section (click here) or download from samfirmware.com .
Once you have the rom files, kill all the KIES tasks using the task-manager in windows. Get your phone into download mode by pressing volume down+menu button+power button until you get the yellow screen showing the android working. then open odin 1.7 and connect your handset. once odin connects, click on the buttons for PDA,PHONE and CSC in odin and browse to the appropraite file which you've download in the rom. also click on the PIT button, browse to the odin folder and select the 512.pit file. Once this is done, check the main odin window to make sure the check-box next to 're-partition' is checked. click start and it should flash the new firmware for you.
Disclaimer: I do not take responsibility for any harm that may come to your phone during the flashing process. The instuctions above are accurate but are to be performed at your own risk.
flash Darky Rom 10.1 with JVO Modem . Best GPS i´ve ever had, and my GPS was really bad.
frostygenius said:
if odin can 'see' you handset, have you tried flashing the ROM again? find a stock froyo rom from one of the threads here in the general section (click here) or download from samfirmware.com .
Once you have the rom files, kill all the KIES tasks using the task-manager in windows. then open odin and connect your handset. once odin connects, click on the buttons for PDA,PHONE and CSC in odin and browse to the appropraite file which you've download in the rom. also click on the PIT button, browse to the odin folder and select the 512.pit file. Once this is done, check the main odin window to make sure the check-box next to 're-partition' is checked. click start and it should flash the new firmware for you.
Disclaimer: I do not take responsibility for any harm that may come to your phone during the flashing process. The instuctions above are accurate but are to be performed at your own risk.
Click to expand...
Click to collapse
@frostygenius
I don´t think that your instrunctions ARE accuarate. You don´t even mention that he has to be in Download mode if he wants to use Odin. Also you advise to connect phone right after opening Odin and than insert the files, but some versions of Odin are known that they malfunctioning if you do this in this order, You should first insert files and set odin and after that plug in your phone.
And if he claims that he is on stock since bought the phone, so maybe he never used it before.
@peterg123
I´m not exactly following what happens to your phone. If I understand correctly the Samsung released defective ROM via KIES and after a week turn it down? But you already updated and now your phone is broken? If yes, I think that Samsung service center should repair your phone or if its serious damage than even replace it.
Is the phone able to boot-up and work properly? Is your recovery mode and/or download mode working? If the download mode (use 3-button combo - VolDown+Home+Power) is working then you can try recover on your own, but be careful, dont do anything before you are sure that you know what you are doing. You can go through this post before start [HOWTO] [REF] [FAQ] [Guides] [Tutorials] Flash/Root/ADB/ROM [MUST READ!].
Also go through the forum or samfirmware.com and find your official version of rom (Eclair 2.1) to be sure that you can anytime revert to this one because of warranty.
EDIT: Also can you please post some photos or video showing what happens to your phone?
Ok, I dunno if this is gonna help but I had a very similar issue when I first got my phone, within a week of owning it.
Points 1-3, exactly what happened mine.
Points 4 & 5 I didn't try, (was fairly new to Android)
Left it in to my local Vodafone shop & within 5 days I had it back in perfect working order, the maintenance report stated faulty hardware, the display module had to be replaced. Maybe worth mentioning to the service guy?
R34L2Pac said:
@frostygenius
I don´t think that your instrunctions ARE accuarate. You don´t even mention that he has to be in Download mode if he wants to use Odin. Also you advise to connect phone right after opening Odin and than insert the files, but some versions of Odin are known that they malfunctioning if you do this in this order, You should first insert files and set odin and after that plug in your phone.
And if he claims that he is on stock since bought the phone, so maybe he never used it before.
@peterg123
I´m not exactly following what happens to your phone. If I understand correctly the Samsung released defective ROM via KIES and after a week turn it down? But you already updated and now your phone is broken? If yes, I think that Samsung service center should repair your phone or if its serious damage than even replace it.
Is the phone able to boot-up and work properly? Is your recovery mode and/or download mode working? If the download mode (use 3-button combo - VolDown+Home+Power) is working then you can try recover on your own, but be careful, dont do anything before you are sure that you know what you are doing. You can go through this post before start [HOWTO] [REF] [FAQ] [Guides] [Tutorials] Flash/Root/ADB/ROM [MUST READ!].
Also go through the forum or samfirmware.com and find your official version of rom (Eclair 2.1) to be sure that you can anytime revert to this one because of warranty.
EDIT: Also can you please post some photos or video showing what happens to your phone?
Click to expand...
Click to collapse
Thanks for the heads-up I forgot to mention those points. I've updated my original post.
Sent from my GT-I9000 using Tapatalk
Thanks, it is not possible to get into download mode, or I would have done all that. As explained, the phone will not go past the giant "S" logo ( 3rd screen after power on). This problem has happened to many people, worldwide.
As explained the three button default firmware does not work.
The Samsung repair agent claims to have used the 301k resistor method to restart the phone and even that failed. I am not sure if this is true but he said so.. not sure because everybody reports success with this.
ODIN, as I said ( 1.8) recognises the COM connection just as does KIES. The problem is, I am not in download mode so can't reflash if I tried.
I have used the phone for 10 weeks since firmware upgrade from 2.1 to 2.2 during which I had no problems except the occasional process stopped errors.
Hope this help, thanks for trying for me
Yes you are correct, I can't get download mode. The phone has never been reflashed or messed with. It came with 2.1 and using KIES in March I reflashed to 2.2 and it worked perfectly for 10 weeks until it semi-bricked.
There is the Black Screen of eath...then there is the pulsasing S screen of limbo! That's what I have.
The only harwdare clue I have is the SGS blew the fuse in my car charger shortly before "expiring"...yet if connected to USB or other charger, it charges the battery and displays the logo.
peterg123 said:
Thanks, it is not possible to get into download mode, or I would have done all that. As explained, the phone will not go past the giant "S" logo ( 3rd screen after power on). This problem has happened to many people, worldwide.
As explained the three button default firmware does not work.
The Samsung repair agent claims to have used the 301k resistor method to restart the phone and even that failed. I am not sure if this is true but he said so.. not sure because everybody reports success with this.
ODIN, as I said ( 1.8) recognises the COM connection just as does KIES. The problem is, I am not in download mode so can't reflash if I tried.
I have used the phone for 10 weeks since firmware upgrade from 2.1 to 2.2 during which I had no problems except the occasional process stopped errors.
Hope this help, thanks for trying for me
Click to expand...
Click to collapse
..But download mode doesn't display the S logo or even the first Galaxy S 1900 logo...it goes straight in.
Try looking up in the Development section - I'm sure there is a jig method in there and it might be worth trying yourself, you've not got mush to lose now.
If you can get into download mode eventually, search for and flash Ezbase, that will get you onto a rooted firmware and it works EVERY single time for me. Good luck.
@R34L2Pac
Hi, thanks. As posted, the stock UK model SGS 1900 with 2.1 Eclair worked perfect from Nov to March 2011, was firmware upodated by KIES in March 2011 to 2.2.1 Froyo and worked like a dream until it went "semi-bricked" with the "Logo of Limbo" screen ( the pulsating giant S) for no reason.
A week before this, I changed SIMs when I changed countries and for some reason lost all added apps. I had to re-install them and even then, sometimes twice as I got many "android process stopped" errors --- even on some of the Sansung installed ones like Layar. That is the only problem I ever had.
The phone has only had apps from Market and never been modded whatsoever. Many thanks
Hi,
You said that you can see a pulsating S logo, sound to me like your phone is bootlooping. But you didnt mention if you can get at least to recovery(VolUp+Home+Power)? If you can get into recovery, you could try just factory reset your phone from recovery and reboot your system.
Also in the development forum you can find some kernels which can be flashed via recovery (like speedmod K13 for Froyo), so you can try to flash this kernel and after reboot into CWM recovery you could try to connect phone to ADB and type the command "adb reboot download".
I read on the forum that the home-made jig method worked for everyone, so looks like the samsung technician was doing something wrong. It is worth trying to made one a see what it does. Also found this thread, where user cuperus claims that even with charger can be simulated the jig by heating-up your device. So you can also try it, just plug your phone to a charger, let it charge for 1hour and than try use 3-button combo to go to download mode.
R34L2Pac said:
Hi,
You said that you can see a pulsating S logo, sound to me like your phone is bootlooping. But you didnt mention if you can get at least to recovery(VolUp+Home+Power)? If you can get into recovery, you could try just factory reset your phone from recovery and reboot your system.
Also in the development forum you can find some kernels which can be flashed via recovery (like speedmod K13 for Froyo), so you can try to flash this kernel and after reboot into CWM recovery you could try to connect phone to ADB and type the command "adb reboot download".
I read on the forum that the home-made jig method worked for everyone, so looks like the samsung technician was doing something wrong. It is worth trying to made one a see what it does. Also found this thread, where user cuperus claims that even with charger can be simulated the jig by heating-up your device. So you can also try it, just plug your phone to a charger, let it charge for 1hour and than try use 3-button combo to go to download mode.
Click to expand...
Click to collapse
Sorry I should have mentioned that it will not get into 3 button recovery mode, that has zero effect or rather, just sends it to the "Logo of Limbo" ( pulsating "S") just as does the power button.
Will maybe try a long charge time and see if that helps! Many thanks
Try en carefully learn hw to use odin coz I gt tha same exact model. I hav flashed mine many tyms en am on 2.3.4 XXJVP. if u do gt into download mode odin will sort u. Regards frm K.poly.
Sent from my GT-I9000 using XDA Premium App
peterg123 said:
Sorry I should have mentioned that it will not get into 3 button recovery mode, that has zero effect or rather, just sends it to the "Logo of Limbo" ( pulsating "S") just as does the power button.
Will maybe try a long charge time and see if that helps! Many thanks
Click to expand...
Click to collapse
how long have you tried holding down the 'volume down+menu+power' keys? a simple quick press of the three buttons does not work. you have to keep holding them all down for a bit (sometimes upto to 15-20 seconds) for it to go into download mode.
Sorry for the fast answer but I'm at work atm... I think he needs to do the 3 combo button fix on his phone first. I know it's on the forum somewhere... Can anyone check it for him? I lost the 3 combo the first time I updated with Keys from 2.1 to 2.2 and I had to fix it using a program that I can't remember to go on download mode and apply that fix.
Then he can use Odin to flash a stock rom as he needs, plus having 3 combo fixed!
Good luck mate!
Sent from my GT-I9000 using XDA App
Possible fix for your problem
Hi peterg,
I was looking through the general forum and found this post, where user beamzuk1 describes method how he fixed his semibricked phone. Symptoms are the same (not booting, glowing soft-keys, vibrating, no recovery and no download mode). So he used 'adb reboot recovery', I would say that proper command is 'adb reboot download', but you can try both. Also go through guide HOWTO use ADB, which I posted here the link in earlier post.
Hope this will help.
PS: Try follow beamzuk1 step-by-step, because if you start phone earlier than you connect it to pc, adb might not recognize the phone. Also be sure that you have correctly installed drivers and android-sdk before you try this.
These phones come with a 2 year warranty. Why don't you contact Samsung directly yourself - telling them that the local repair centre wouldn't fix/replace it for you. If you did nothing besides what you described, then I would have thought you were entitled to have it fixed or replaced by Samsung.
LiverpoolFCfan said:
These phones come with a 2 year warranty. Why don't you contact Samsung directly yourself - telling them that the local repair centre wouldn't fix/replace it for you. If you did nothing besides what you described, then I would have thought you were entitled to have it fixed or replaced by Samsung.
Click to expand...
Click to collapse
+1
Also think that Samsung should repair it or replace it.
The fact your repair center has done nothing to fix your phone, in several occasions, now entitles you to brand new replacement or your money refunded in full, contract terminated and expenses paid for your losses incurred as a result of their negligence.
Why not hit them up for the SGS 2.
I had the same issue with my first Galaxy S...wifi stopped working at first, I turned it off then on again but nothing changed. So I rebooted to see if it would correct itself. Bootloops and no 3 button combo (download or recovery)
Sent it off to Samsung through the Carphone Warehouse in the UK. I'd contact a Samsung Service Centre directly if I were you.
Hello All,
I Hard bricked my N9005 while downgrading form Stock 5.0 to stock N9005VJUBMI7 (4.3 ?).
Note 3 N9005 32GB .. was working well on Android 5.0, except GPS issue and battery drain issue. So, I thought will go back to older stock ROM.
While flashing N9005VJUBMI7 (from Sammobile ) on Odin, without any PIt file and Re-partition unchecked. Odin flash completed and it said successful.
But, after this, phone never booted. Power button doesn't work. Download mode keys won't work. Recovery mode keys won't work. Charger doesn't work. USB doesn't detect on PC. LED never lit. Is this state called HARD-BRICKED? Or its a step ahead and completely dead ?!
I tried the debrick.img on SD card method using the thread by ValenteL. Followed below steps:
On Windows 7, used win32DiskImager, and created the rescue micros SD card (16GB) using debrick image of 4.4.2. Inserted SD card on phone, put battery and tried to see if phone boots. Unfortunately, it didn't Tried to play around with all keys, long press for 30 secs, usb cable, charger.. etc. But, still no luck.
Please let me know if any suggestions to bring the device back alive!
Thanks in advance !!
maesiva said:
Hello All,
I Hard bricked my N9005 while downgrading form Stock 5.0 to stock N9005VJUBMI7 (4.3 ?).
Note 3 N9005 32GB .. was working well on Android 5.0, except GPS issue and battery drain issue. So, I thought will go back to older stock ROM.
While flashing N9005VJUBMI7 (from Sammobile ) on Odin, without any PIt file and Re-partition unchecked. Odin flash completed and it said successful.
But, after this, phone never booted. Power button doesn't work. Download mode keys won't work. Recovery mode keys won't work. Charger doesn't work. USB doesn't detect on PC. LED never lit. Is this state called HARD-BRICKED? Or its a step ahead and completely dead ?!
I tried the debrick.img on SD card method using the thread by ValenteL. Followed below steps:
On Windows 7, used win32DiskImager, and created the rescue micros SD card (16GB) using debrick image of 4.4.2. Inserted SD card on phone, put battery and tried to see if phone boots. Unfortunately, it didn't Tried to play around with all keys, long press for 30 secs, usb cable, charger.. etc. But, still no luck.
Please let me know if any suggestions to bring the device back alive!
Thanks in advance !!
Click to expand...
Click to collapse
You should have known that you can not downgrade from 5 to 4.3.
maesiva said:
Hello All,
I Hard bricked my N9005 while downgrading form Stock 5.0 to stock N9005VJUBMI7 (4.3 ?).
Note 3 N9005 32GB .. was working well on Android 5.0, except GPS issue and battery drain issue. So, I thought will go back to older stock ROM.
While flashing N9005VJUBMI7 (from Sammobile ) on Odin, without any PIt file and Re-partition unchecked. Odin flash completed and it said successful.
But, after this, phone never booted. Power button doesn't work. Download mode keys won't work. Recovery mode keys won't work. Charger doesn't work. USB doesn't detect on PC. LED never lit. Is this state called HARD-BRICKED? Or its a step ahead and completely dead ?!
I tried the debrick.img on SD card method using the thread by ValenteL. Followed below steps:
On Windows 7, used win32DiskImager, and created the rescue micros SD card (16GB) using debrick image of 4.4.2. Inserted SD card on phone, put battery and tried to see if phone boots. Unfortunately, it didn't Tried to play around with all keys, long press for 30 secs, usb cable, charger.. etc. But, still no luck.
Please let me know if any suggestions to bring the device back alive!
Thanks in advance !!
Click to expand...
Click to collapse
Remove battery fore some minutes then go download mode again and downgrade to nk2
kenny1991 said:
You should have known that you can not downgrade from 5 to 4.3.
Click to expand...
Click to collapse
Gee.. Got to know about it 'hard' way
What you suggest?
meawww said:
Remove battery fore some minutes then go download mode again and downgrade to nk2
Click to expand...
Click to collapse
Sorry, my phone is too adamant. It won't go to download mode. All I want is to get it into download mode! Would jig help? What you think? Spend some 3$ on eBay?
Worth a try with the jig before paying for a service centre repair .
JJEgan said:
Worth a try with the jig before paying for a service centre repair .
Click to expand...
Click to collapse
Tried the ebay JIG.. No luck. Note 3 still not up..
JIG is good.. ensured with other (working) Samsung phone. It puts into download mode, but not to my Note 3
Ok...
Somehow i managed to reach a point where my device does not boot when i press the power botton...
Unless i connect it to a usb or a power and then it starts and even goes to the android but loops...
If i disconnect it from the cable it just dies...
Any ideas?
10xs.
mirzanoshin said:
Which model of phone you are using?
Click to expand...
Click to collapse
S4 galaxy i9500
Yes... It happened after i tried to update a firmware to lollilop...
After it happened i tried to fix PIT with a stock rom...
Now it turns on while connected to a usb shows the galxy logo and then reboots...
If disconnected from usb or power it just dies...
I can access download mode and cwm while connected to usb.
At some moments it even reaches the android system and tries booting but then goes to a reboot loop again.
JacobTodoit said:
Ok...
Somehow i managed to reach a point where my device does not boot when i press the power botton...
Unless i connect it to a usb or a power and then it starts and even goes to the android but loops...
If i disconnect it from the cable it just dies...
Any ideas?
10xs.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. Please provide your device make and model so I can guide you to the correct information and help you need.
Thank you.
What problem did the phone have that prompted you to flash the phone?
Did you perform a factory wipe in stock recovery before booting the newly-flashed stock rom for the first time?
The original problem was that all processes started halting...
I did the wipe to lollilop and then installed a rom... That is when tthe device bricked.
Later i downloaded a firmware which was supposed to be stock firmware and tried flashing it but it didn't help.
No matter what i try it keeps looping without the ability to power on without a usb connection being plugged (pc or power).
I am looking for an original firmware which would contain the files for the bbotloader and other in order to flash again...
Will appreciate any help.
The device was bought in Israel.
Did you try flashing a stock ROM with a pit file?
Hi and thank u for your response.
As far as i know it os a galaxy s4,
Gt-I9500 bought on Israel. Was running the cellphone company' stock version 5.0.1 with base version i9500xxuhhog1.
It started doing some problems after it was lost and found.
The cell company bllocked it and we had to replace the imei.
Then every process we tried to work with, halted.
So we decided to flash a new version and new firmware.
We tried moving to lollilop and cm12 but the dvices got to the point where it is now.
I am sure it is something we did with odin...
But not sure what.
Now the situation is as follows.
The device doesn't boot when pressing on the power button.
For booting we need to plug it to a usb power supply or pc and just go to recovery.
From there we choose the option of reboot system and it boots, but keeps looping.
If at any moment we unplug the ub connection it dies.
Following to some advises i tried getting the stock rom online and found a version i9500xxuhog1.
And a pit file.
I applied them to the device, though nothong changed.
10xs for any help.
Jacob
The_Merovingian said:
Greetings,
Thank you for using XDA Assist. Please provide your device make and model so I can guide you to the correct information and help you need.
Thank you.
Click to expand...
Click to collapse
audit13 said:
Did you try flashing a stock ROM with a pit file?
Click to expand...
Click to collapse
Yes... Several times.
With several different firmwares.
So Odin never finished flashing a stock rom?
You may have to use a jtag service to repair the phone.
Hello,
I was trying to flash Twrp recovery in my phone using flashify. It said flash successfully and i rebooted. It starting bootlooping. I manually tried by pressing Volume up + Home+Power keys it was still doing bootloop. I tried to goto download mode by pressing Volume Down+ Home+Power keys it still kept bootlooping even USB jig didn't work. I need your valued suggestion about what to do next.
Thanks in Advance.
I have Samsung Galaxy Grand Primr G530H
here is video link youtu.be/B_EtRTH93YE
Just flash your firmware from Odin using a PC, I had a similar problem in my tablet, it didn't had download mode either and that worked, try it.
When I connect it to Pc it keeps bootlooping and pc gives sound of connecting then disconnecting of hardware.
GorJessSpazzer said:
Just flash your firmware from Odin using a PC, I had a similar problem in my tablet, it didn't had download mode either and that worked, try it.
Click to expand...
Click to collapse
How did you flash a firmware, when your tablet didn't have download mode? What ODIN version did you use? please tell us we need your experience.
talvigi said:
How did you flash a firmware, when your tablet didn't have download mode? What ODIN version did you use? please tell us we need your experience.
Click to expand...
Click to collapse
Turn off your device, keep your finger in the button until the device is off or pull off the battery, connect it to the PC and flash your firmware through Odin, at that moment I used the 3.70 i think but you can use the latest version it's fine, that should install download mode and the whole firmware if that doesn't work I'm afraid I don't know how else I can help, that's what I did and it worked
GorJessSpazzer said:
Turn off your device, keep your finger in the button until the device is off or pull off the battery, connect it to the PC and flash your firmware through Odin, at that moment I used the 3.70 i think but you can use the latest version it's fine, that should install download mode and the whole firmware if that doesn't work I'm afraid I don't know how else I can help, that's what I did and it worked
Click to expand...
Click to collapse
You are right I did it the same way and it worked for me too. I actually was thinking the phone was quite dead bur or wasn't, I just flashed the recovery firmware 4.4.4 Russian and if you ask me food the step by step procedure it was just like this:
1. I started the Odin 3.07 and connected my device to see is it was detected or not, my surprise the Odin catch it, and shown added and the port number was 18.
2. I just pulled out the USB cable from my laptop and loaded the BL file only to just flash the bootloader file and see what would happen, I was trying it bcz I was totally disappointed with the device i.e. Grand Prime 530H Duos. I also noticed that my device was not stable even with that black screen it used to restart after almost five minutes in that case. And I knew that in 5 minute I will just be able to flash BL file. The BL file was loaded on the Odin now and I inserted the USB cable again while keeping the vol down button pressed to my laptop when the Odin again found and connected with my device, I didnot take any more time to flash BL file.
3. As soon as i had not flashed all the SW therefore, my device didn't boot properly, and I thought it didn't work but when my device was connected to the computer I just listened the startup tone of the Android 4.4.4. From that moment I knew my device was not dead now so i had to select all four files from the recovery firmware of 4.4.4 and connect the device to odin even there was no sign of download mode, as soon i clicked the Start button i saw many things in the Odin which were good enough to see. after the firmware flashed the device got started.
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
You are right I did it the same way and it worked for me too. I actually was thinking the phone was quite dead bur or wasn't, I just flashed the recovery firmware 4.4.4 Russian and if you ask me food the step by step procedure it was just like this:
1. I started the Odin 3.07 and connected my device to see is it was detected or not, my surprise the Odin catch it, and shown added and the port number was 18.
2. I just pulled out the USB cable from my laptop and loaded the BL file only to just flash the bootloader file and see what would happen, I was trying it bcz I was totally disappointed with the device i.e. Grand Prime 530H Duos. I also noticed that my device was not stable even with that black screen it used to restart after almost five minutes in that case. And I knew that in 5 minute I will just be able to flash BL file. The BL file was loaded on the Odin now and I inserted the USB cable again while keeping the vol down button pressed to my laptop when the Odin again found and connected with my device, I didnot take any more time to flash BL file.
3. As soon as i had not flashed all the SW therefore, my device didn't boot properly, and I thought it didn't work but when my device was connected to the computer I just listened the startup tone of the Android 4.4.4. From that moment I knew my device was not dead now so i had to select all four files from the recovery firmware of 4.4.4 and connect the device to odin even there was no sign of download mode, as soon i clicked the Start button i saw many things in the Odin which were good enough to see. after the firmware flashed the device got started.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
I'm glad I helped you and thanks for your description, other people with the same problem can see it, my English its not good and I was afraid that I didn't help you correctly.
Same problem, but apparently worst!
AwkWeirdo said:
Hello,
I was trying to flash Twrp recovery in my phone using flashify. It said flash successfully and i rebooted. It starting bootlooping. I manually tried by pressing Volume up + Home+Power keys it was still doing bootloop. I tried to goto download mode by pressing Volume Down+ Home+Power keys it still kept bootlooping even USB jig didn't work. I need your valued suggestion about what to do next.
Thanks in Advance.
I have Samsung Galaxy Grand Primr G530H
here is video link youtu.be/B_EtRTH93YE
Click to expand...
Click to collapse
Hello guys! Could you please help me with the same issue? The difference is that Odin doesn't recognize when I plug in my phone! I don't know what else to do. It's a G530H.
Thank you very much!
GorJessSpazzer said:
I'm glad I helped you and thanks for your description, other people with the same problem can see it, my English its not good and I was afraid that I didn't help you correctly.
Click to expand...
Click to collapse
talvigi said:
You are right I did it the same way and it worked for me too. I actually was thinking the phone was quite dead but it wasn't, I just flashed the recovery firmware 4.4.4 Russian and if you ask me for the step by step procedure it was someting like this:
1. I started the Odin 3.07 and connected my device to see if it was detected or not, to my surprise, Odin catch it, and shown added and the port number was 18.
2. I just pulled out the USB cable from my laptop and loaded the BL file only to just flash the bootloader file and see what would happen, I was trying it bcz I was totally disappointed with the device i.e. Grand Prime 530H Duos. I also noticed that my device was not stable even with that black screen it used to restart after almost five minutes in that case. And I knew that in 5 minute I will just be able to flash BL file. The BL file was loaded on the Odin now and I inserted the USB cable again while keeping the vol down + home key pressed, to my laptop when the Odin again found and connected with my device, I didnot take any more time to flash BL file.
3. As soon as i had not flashed all the SW therefore, my device didn't boot properly, and I thought it didn't work but when my device was connected to the computer I just listened the startup tone of the Android 4.4.4. or the device. From that moment I knew my device was not dead now so i pullup the battery, put it again inside to check its status, did this almost thrice, but still the same black screen, yet i heard the startup sound everytime. Now as far as knew the phone is on but showing nothing, I had to select all four files from the recovery firmware of 4.4.4 and connect the device to odin even there was no sign of download mode, as soon i clicked the Start button i saw many things in the Odin bar which were good enough to see. after the firmware flashed the device got started.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
Sent from my SAMSUNG-SM-G920A using Tapatalk
lucas13garcia said:
Hello guys! Could you please help me with the same issue? The difference is that Odin doesn't recognize when I plug in my phone! I don't know what else to do. It's a G530H.
Thank you very much!
Click to expand...
Click to collapse
Is your USB cable original is it working on other devices? And are you using a USB 2.0 port, that is very much necessary, for Odin and some other hardware/software environment applications. And you also must have Samsung USB drivers installed in your PC, you can also try all this process on some other PCs
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
Is your USB cable original is it working on other devices? And are you using a USB 2.0 port, that is very much necessary, for Odin and some other hardware/software environment applications. And you also must have Samsung USB drivers installed in your PC, you can also try all this process on some other PCs
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
Hello!
Yes, that USB works with other phones. And even not being the original one, it was working to transfer files before this issue...
It is a USB 2.0 port, and even when I go to "Device Manage" on Windows, it doesn't show any port with an unknown device or something like that...
Thanks!
Hi Everyone!
I have an XT1641, which previously had a charging pin problem.
At the Last week, it started to reboot only many times until it suddenly shut down and didn't light anymore.
When plugged into a charger, the white light flickered.
Since I thought it was still a charging pin problem, make the change.
The cellphone works seemed to restart, but it continues with the same problem.
Sometimes the bootloader works ( Power + Vol -) and sometimes No.
I already tried everything. Install ROM STOCK, I made it blankflash (none worked "waiting for firehose to get ready" ).
It seems to be a firmware or similar problem, but I can't find the solution.
Previously, you never had a custom ROM installed, or root, or anything; at this cellphone
Thank you!
PD: SORRY FOR MY ENGLISH
How did you try for installing stock rom? Check usb drivers installed in your pc
przvlj said:
How did you try for installing stock rom? Check usb drivers installed in your pc
Click to expand...
Click to collapse
By Fast Boot (when it worked).
Now, after a week of turning it off, the cell phone turned on again without problems.