Can someone explain why a driver hasn't been made for WM6 Being able to pair an xbox 360 controller and use it like a gamepad for your pocket pc?
Can this be done?
Has it allready been done?
the Xbox360 gamepad uses a proprietary form of Wifi to connect to the Xbox 360, not Bluetooth like the PS3. Hope that answers your question.
well it may be possible but microsoft will never share sensitive information about their controllers
in theory it may be possible to create adhoc connection to your device but it may require new wlan drover for your device and aditional software to map the controls for the gamepad...
the similar thing goes for the PS3 controller
It would be incredibly difficult since the controller switches frequencies randomly to avoid interference from other 900MHZ devices.
since no xbox.......why no ps3 controller driver??
j/k
i've been playing around with a ps3 controller that i got......drivers for using the controller while is plugged into a pc are all over the internet........but i just found this a few days ago, drivers for using bluetooth.
http://forums.ps2dev.org/viewtopic.php?p=65104
scroll down to the post by 89ron. tried it......works for me, but the down side is you have to switch from your bluetooth stack to this freebt stack
Wait...wait..
I had the gamepad on and it showed on my Bluetooth as "Player 1" and the XBOX 360 was not on.. What does this tell you?
que? What do you mean?
Hi, I've got a bit of an issue.
I'm trying to use a wireless Xbox 360 controller to play gamesd on my Lg G2.
The device is rooted, running stock Android 4.2.2, and is the At&T model.
This is my setup: Xbox 360 wireless reciever (aftermarket, but it confirmed works on my pc),
connected to a USB-OTG cable (confirmed working, with a usb drive, keyboard, and mouse),
connected to the micro USB port on my device (again, confirmed working).
The LED's on the reciever light up, and I can "pair" my controller with it, but after "paring", all four lights on the controller are still blinking, and my phone does not recognize it as a controller.
I've searched around, and could not find much help on this topic for this device.
If anyone knows what's going wrong here, any help would be appreciated.
Thanks!
I'm not sure if that would work, I would imagine the phone would need the drivers for that dongle.
You can pair a Wiimote or a PS3/4 control to it though.But you can always get a wired control for the 360, I would presume that should work.
I got it to work, using the methods described here.
But, now there's just a small issue. In any game i play with the controller, it's rather hard to control, as there is virtually no thumbstick "dead zone". What I mean, is, if the thumbstick is moved even millimeters from its default point, the character on screen starts to move. And 360 controller thumbsticks have a bit of wiggle-room for moving the sticks before it's actually supposed to do anything, so this is rather annoying.
Does anyone know how i can adjust the dead-zone of my controller?
(I've tried this in multiple games; Modern Combat 5, Dead Trigger, and the like.)
From my understanding the DualShock4 PS4 Controller will work with the Shield TV when using USB/OTG cable. Has anyone tried pairing over Bluetooth?
I think the PS4 pad is the most balanced gamepad for thew type of gaming I do(mostly emu/retro gaming and occasional Android native games)and before I order one Id really like to hear from anyone who uses different types of gamepads
Yes, it works with the regular USB cable.
The PS4 controller can connect wirelessly to any android device using the closed source paid app Sixaxis Controller available on Google Play. This works quite well. If you adjust the settings and default mapping it can work just like a native Android gamepad and start the service on boot. Having tried it on my 16 GB model there are two caviats. Firstly it overrides the Bluetooth hardware to simulate a PS4, so you can't simultaneously connect any normal Bluetooth devices (such as the Shield remote). Luckily the Shield gamepad uses WiFi-direct. Secondly, for some reason the D-pad is unavailable during the gameplay of some games. This is no good for playing Half-Life 2. Also the non-default mapping doesn't play well with GTA San Andreas. Despite these issues I'm still glad I bought the Dualshock 4 (I don't have a PS4) because it's the nicest physical gamepad I've used, and the two issues I've listed are only software problems. My LG G3 running CM 12.1 nightlies can connect to the Dualshock 4 without the app but doesn't map well. Another cool thing about the Sixaxis Controller is that you can use the touchpad as a mousepad. Great for sideloaded apps. Oh and you need root to use Sixaxis Controller.
Got it. I was aware of sixaxxis for other android tablets/phones Ive used but for some reason I thought I had seen a youtube video of someone simply pairing a PS4 gamepad using the native Bluetooth pairing process. I may have been looking at a video of another device, not the ShieldTV
My Sony TV with built in Android TV has drivers for a PS4 Controllers to used via bluetooth, is there anyway I can extract the files to be used with the Shield TV?
Did you root the shield tv in order to use the sixaxis? Or did you change the master address and then pair as normal on the shield tv?
BenjiHansell said:
The PS4 controller can connect wirelessly to any android device using the closed source paid app Sixaxis Controller available on Google Play. This works quite well. If you adjust the settings and default mapping it can work just like a native Android gamepad and start the service on boot. Having tried it on my 16 GB model there are two caviats. Firstly it overrides the Bluetooth hardware to simulate a PS4, so you can't simultaneously connect any normal Bluetooth devices (such as the Shield remote). Luckily the Shield gamepad uses WiFi-direct. Secondly, for some reason the D-pad is unavailable during the gameplay of some games. This is no good for playing Half-Life 2. Also the non-default mapping doesn't play well with GTA San Andreas. Despite these issues I'm still glad I bought the Dualshock 4 (I don't have a PS4) because it's the nicest physical gamepad I've used, and the two issues I've listed are only software problems. My LG G3 running CM 12.1 nightlies can connect to the Dualshock 4 without the app but doesn't map well. Another cool thing about the Sixaxis Controller is that you can use the touchpad as a mousepad. Great for sideloaded apps. Oh and you need root to use Sixaxis Controller.
Click to expand...
Click to collapse
aggiemarine07 said:
Did you root the shield tv in order to use the sixaxis? Or did you change the master address and then pair as normal on the shield tv?
Click to expand...
Click to collapse
I rooted in order to use the Sixaxis Controller app. I never managed to pair it to the Shield TV via normal bluetooth (like I can with my phone). And the master address needs to be changed either way.
BenjiHansell said:
I rooted in order to use the Sixaxis Controller app. I never managed to pair it to the Shield TV via normal bluetooth (like I can with my phone). And the master address needs to be changed either way.
Click to expand...
Click to collapse
yeah I rooted my shield TV last night and using the Sixaxis appto run my Dualshock4 controller. Worked like a charm.
does the siaxais controller ps4 work with the nvidia shield for multiplayer?
The Sixaxis Controller app claims to be able to handle multiple PlayStation controllers but I haven't tested this. I can confirm that it works multiplayer using a DS4 and Shield Controller (which uses WiFi direct, so isn't affected by Sixaxis Controller overriding the Bluetooth hardware). Interestingly the DS4 now pairs with the Shield TV (via Bluetooth, without Sixaxis or root) and maps correctly as of firmware v2.1. Unfortunately it misses button presses and it's impossible to turn off the DS4 without unplugging the Shield or unpairing it (and it took about 20 attempts to pair). Sixaxis still works well but require root and disconnects all other Bluetooth devices. I'm fairly sure that you can pair DS4 controllers with Sony Android TVs out of the box.
will it work via a cable connected usb without a need for an app?
i want a second controller not sure which one to get
anyone using this with bluetooth be aware: if you leave the sixaxis app running for too long with dualshock bluetooth enabled, it may eventually disable bluetooth on your device when trying to go back.
ive been through 2 different nexus players, as well as a shield tv and all have ended up disabling OS bluetooth, even when turning off the sixaxis bluetooth, resulting in requring either a factory reset or android terminal installed and typing in some commands to get it to work again. What causes the issue seems to be random, as sometimes i can leave the app running and come back and it still works, other times it doesnt though. you can still use the nvidia controller since it runs via wifi, but the remote and any other bluetooth devices wont work. this issue is a random event and doesnt always occur, but it IS there, and its a pain to get it working again.
Perhaps someone can find a compatible app to sideload to enable/disable bluetooth in case this happens? would be much easier than typing in terminal commands.
does itwork fine wired ? and is it a better controler
unvaluablespace said:
anyone using this with bluetooth be aware: if you leave the sixaxis app running for too long with dualshock bluetooth enabled, it may eventually disable bluetooth on your device when trying to go back.
ive been through 2 different nexus players, as well as a shield tv and all have ended up disabling OS bluetooth, even when turning off the sixaxis bluetooth, resulting in requring either a factory reset or android terminal installed and typing in some commands to get it to work again. What causes the issue seems to be random, as sometimes i can leave the app running and come back and it still works, other times it doesnt though. you can still use the nvidia controller since it runs via wifi, but the remote and any other bluetooth devices wont work. this issue is a random event and doesnt always occur, but it IS there, and its a pain to get it working again.
Perhaps someone can find a compatible app to sideload to enable/disable bluetooth in case this happens? would be much easier than typing in terminal commands.
Click to expand...
Click to collapse
Yeah, I experienced the same issues in just my first time pairing a DS4 controller with the Sixaxis app... Also, like others mentioned on here, the default layout is a bit weird (Options=Select; Share=Back, etc) which means a lot of customizing in games, etc. Also, the service doesn't always auto-start that well so sometimes it takes some time to get it 'connected and ready to go' and I don't like how the app takes over Bluetooth while it's running. The only thing I did like is that the touchpad feature does work well (as long as the app supports 'Mouse input'), but overall I didn't think it's worth the hassle if I have to this every time I want to use the controller.
BTW, in case your Bluetooth becomes disabled while using this app, the command that worked for me (in adb shell) is:
Code:
su
service call bluetooth_manager 6
Has anyone successfully paired the shield with a DS4 without the sixaxis app? My shield can see the controller (listed as wireless controller) but they can't seem to pair.
finty said:
Has anyone successfully paired the shield with a DS4 without the sixaxis app? My shield can see the controller (listed as wireless controller) but they can't seem to pair.
Click to expand...
Click to collapse
Bump, Would also like to know!
d0ubl3_d1zzl3 said:
Yeah, I experienced the same issues in just my first time pairing a DS4 controller with the Sixaxis app... Also, like others mentioned on here, the default layout is a bit weird (Options=Select; Share=Back, etc) which means a lot of customizing in games, etc. Also, the service doesn't always auto-start that well so sometimes it takes some time to get it 'connected and ready to go' and I don't like how the app takes over Bluetooth while it's running. The only thing I did like is that the touchpad feature does work well (as long as the app supports 'Mouse input'), but overall I didn't think it's worth the hassle if I have to this every time I want to use the controller.
BTW, in case your Bluetooth becomes disabled while using this app, the command that worked for me (in adb shell) is:
Code:
su
service call bluetooth_manager 6
Click to expand...
Click to collapse
Same thing happened to me although I only had the app for about 2 hours before it disabled BT. I couldn't get it to work while installed, and i am rooted. I don't believe it works in the newest firmware 3.0.
What did you use to write those commands? Would adb minimalist work? Same app used to root the shield?
Sent from my Sammy S6 using Revolution 1.0
mattkilla420 said:
Same thing happened to me although I only had the app for about 2 hours before it disabled BT. I couldn't get it to work while installed, and i am rooted. I don't believe it works in the newest firmware 3.0.
What did you use to write those commands? Would adb minimalist work? Same app used to root the shield?
Click to expand...
Click to collapse
Well, I used the Nvidia Shield TV Utility App to get into an adb shell, but Minimal should work just as well. Just make sure to run the 'adb shell' command before you run the commands I listed on my post above..
I used terminal Emulator on the device and it worked great. Turned BT back on
Sent from my Sammy S6 using Revolution 1.0
Before rooting and buying the app I'd know if I can connect more than DS4 via bluetooth.. Anyone tried it?
thanks!
I have tried through bluetooth and the phone is unable to pair with the controller. Is there any other way to work around this issue and connect wirelessly? Also will a USB-C OTG cable work with the 6P?
I haven't received my 6P yet but on my 6 I use sixaxis controller with my ps3 controller. Not sure if ps4 controller does native Bluetooth gamepad or you need to use the app.
Use this to set the parent address to your nexus 6ps bluetooth mac address (you can find it in settings->about)
http://www.dancingpixelstudios.com/sixaxiscontroller/tool.html
Then connect it as a standard bluetooth device.
Unfortuantely after 30sec it starts lagging terribly
So I successfully got the ps4 controller to pair over Bluetooth without adjusting any settings. It wouldn't work at first but it added it as a device. Then when I tried again the next day after restarting the phone it connected.
you have to hold PS button and share at the same time until you get the flashing white light.
However, the triggers mapped weird for games and there is lag.
Does anyone know of a way to fix the mapping without root?
I also successfully used the OTG cable with the ps3 controller. This worked a lot better this works a lot faster then the Bluetooth ps4. And the mapping is correct.
Haven't tried usb to ps4 yet. UPDATE
So ps4 over otg also has some mapping issues. Tested this out in minecraft settings since you can customize controller mapping. For some reason on ps4 some buttons didn't seem to me recognized, everything was weird, like r2 was labeled as a button and triangle wasn't showing anything.
Tried to connect ps3 via Bluetooth but couldn't get it to work
I've installed full Android on my shield TV. I have an issue with extreme lag using a ps4 and shield gamepads usb wired. Its very strange because in the stock Android interface everything works flawless. But when I use GeForce Now i get extreme lag on button presses where i have to hold face buttons for about 2 seconds to get a response. But this only happens when a game is loaded. When im in the GeForce Now Menu my conttoller works and response is fine. Same thing with RetroArch. Ive tried bluetooth with my PS4 controller and I get the same result.
Also, how would i be able to get my Shield gamepad working wirelessly?? I heard something about using with droidmote client server but its not really clear to me.
Can somebody help me figure this out? I switched to Full Android for more freedom and apps but if I cant use my controllers then i will have to revert to rooted stock firmware for my shield.
You're probably going to want to go back to stock firmware then. There is no fix for getting the Nvidia wireless controllers working with Full Android. This is due to the closed source nature of the wireless controller drivers.
But what about other controllers like PS4? I heard PS4 can work wirelessy and Shield controller can work wired