Related
I have CM7 Nightly #42 and I'm looking for the best modem for Europe, Germany mainly. I can't get 3G to work with JVP/JVQ. Would be nice if it's easy on battery, too.
Any suggestions?
mobidzid said:
I have CM7 Nightly #42 and I'm looking for the best modem for Europe, Germany mainly. I can't get 3G to work with JVP/JVQ. Would be nice if it's easy on battery, too.
Any suggestions?
Click to expand...
Click to collapse
I am using JVO. For the 2g/3g toggle to work wait for the next nightlie. This issue has been resolved
http://review.cyanogenmod.com/#change,6773
http://cm-nightlies.appspot.com/?device=galaxysmtd
Great news that it finally has been resolved! I miss Cyanogen (used it on my G1 sold 10 months ago, but now I'm on stock Samsung ROM), maybe it's time to do the switch.
Italy For what is the best modem? I thank you in advance CM7 "Italy 3"
I'm on #61 and still no 3G... Nothing in release notes of #62 indicating any improvement. Perhaps I should flash JVK modem back?
mobidzid said:
I'm on #61 and still no 3G... Nothing in release notes of #62 indicating any improvement. Perhaps I should flash JVK modem back?
Click to expand...
Click to collapse
You can have 3G only by using the settings menu and not the widget
I don't use the widget. I keep 3G on in the settings, but all I get is H/3G flashing on status bar from time to time with H staying there for good.
Since "H" is better form of "3G", it looks ok.
ugh... I'm turning red now, good you can't see it... THANKS!
mobidzid said:
ugh... I'm turning red now, good you can't see it... THANKS!
Click to expand...
Click to collapse
H stands for: HSDPA, 7.2 Mbps
Basically means that you have access to high speed internet on your phone.
ok, ok, I got it the first time... please do not kick me anymore, I'm laying on the floor already...
I'm having a bit of a problem. Now I know there is LTE where I live, but for some reason not getting it. I flashed the radio to 0.33. I did the *#*#4636#*#* and enabled LTE/GSM (auto). Changed the apn settings to fast.tmobile.com and set the bearer to LTE, but still not getting an internet connection.
dia_naji said:
I'm having a bit of a problem. Now I know there is LTE where I live, but for some reason not getting it. I flashed the radio to 0.33. I did the *#*#4636#*#* and enabled LTE/GSM (auto). Changed the apn settings to fast.tmobile.com and set the bearer to LTE, but still not getting an internet connection.
Click to expand...
Click to collapse
If you really have the APN as "fast.tmobile.com", then you forgot the dash. This is what you have to put:
fast.t-mobile.com
the dash is essential.
Did that still nothing,
rr5678 said:
If you really have the APN as "fast.tmobile.com", then you forgot the dash. This is what you have to put:
fast.t-mobile.com
the dash is essential.
Click to expand...
Click to collapse
dia_naji said:
Did that still nothing,
Click to expand...
Click to collapse
Is it set for IPv4 only?
rr5678 said:
Is it set for IPv4 only?
Click to expand...
Click to collapse
That doesn't matter. Mines is on IPv4 only and I get connection.
zephiK said:
That doesn't matter. Mines is on IPv4 only and I get connection.
Click to expand...
Click to collapse
It sometimes has to be set to IPv4 only.
Try setting it to LTE only, then when you get the data switch to LTE/GSM. Sometimes when I don't get LTE I just do that and it works fine.
Sent from my Nexus 4 using Tapatalk 4 Beta
justin11141 said:
Try setting it to LTE only, then when you get the data switch to LTE/GSM. Sometimes when I don't get LTE I just do that and it works fine.
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I tried everything mentioned above :/ any other suggestions ?
What ROM are you running?
Sent from my Nexus 4 using Tapatalk 2
melo1819 said:
What ROM are you running?
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
I am using PA 3.60
Try running latest carbon nightly? LTE wasn't working for me with other Roms but with carbon the APN is already set.. LTE is working perfect for me on carbon.
Sent from my Nexus 4 using Tapatalk 2
---------- Post added at 10:53 AM ---------- Previous post was at 10:49 AM ----------
Also you can use this app instead of dialing the dialer code. Just makes it a lil faster.
https://play.google.com/store/apps/details?id=com.kei5rio.secretcode
Sent from my Nexus 4 using Tapatalk 2
You need to leave the 'bearer' as unspecified or unknown I forget what it says but don't use LTE or the other setting.
Also, I use "LTE/GSM/CDMA" setting.. it works better for me.
ingenious247 said:
You need to leave the 'bearer' as unspecified or unknown I forget what it says but don't use LTE or the other setting.
Also, I use "LTE/GSM/CDMA" setting.. it works better for me.
Click to expand...
Click to collapse
Cdma.. Why? Just asking..
Sent from my Nexus 4 using Tapatalk 2
I don't know but when I just use that it works better when I am not in a 4G area. Who knows could have been coincidence but I cannot go into the menu to change it now because it will break my LTE (mine sticks after reboot)
If you really just want to check out LTE in your area may I suggest you nandroid current rom and download the LTE version of CM 10.1. Install and boot it up and check to see if indeed LTE is running fine in your area. Then come back to your rom and start fresh.
I just added the 3 lines to my build.prop flashed .27 radio and make the proper script changes for in call volume to work and its been good to go. But if you did all this and still have problems like I suggested above just flash an LTE rom to make sure all is ok
playya said:
If you really just want to check out LTE in your area may I suggest you nandroid current rom and download the LTE version of CM 10.1. Install and boot it up and check to see if indeed LTE is running fine in your area. Then come back to your rom and start fresh.
I just added the 3 lines to my build.prop flashed .27 radio and make the proper script changes for in call volume to work and its been good to go. But if you did all this and still have problems like I suggested above just flash an LTE rom to make sure all is ok
Click to expand...
Click to collapse
Hey man, I've been trying to get LTE working, but I didn't get it right. Can you explain what you did in a little more detail? Thanks.
**hippowise**.**com**/how-to-permanently-enable-lte-on-android-4-2-2-nexus-4/
Follow everything in Part 5. I did that and I'm getting 4g at speeds around 30mbps. Spaced because I want to help, but I can't post links yet.
lVlaciiiii said:
Hey man, I've been trying to get LTE working, but I didn't get it right. Can you explain what you did in a little more detail? Thanks.
Click to expand...
Click to collapse
Detailed info is all over the forums:
1. You can simply flash this rom here
2. Flash .27 or .33 radio from here
Thats all you need to achieve LTE and is the most simple way of doing it that I have seen. Flashed radio and rom in same session then changed my network to LTE and was up and running in 5 minutes.
Current rom:
Add this line to build.prop
Code:
#included in <build.prop>
/*
*telephony.lteOnGsmDevice=1
*ro.telephony.default_network=9
*ro.ril.def.preferred.network=9
*/
Then go here for audio fix
or go here <--- I am on T-Mobile and used this method..
After I was done I had LTE working so I could try out the speed differences.
playya said:
Detailed info is all over the forums:
1. You can simply flash this rom here
2. Flash .27 or .33 radio from here
Thats all you need to achieve LTE and is the most simple way of doing it that I have seen. Flashed radio and rom in same session then changed my network to LTE and was up and running in 5 minutes.
Current rom:
Add this line to build.prop
Code:
#included in <build.prop>
/*
*telephony.lteOnGsmDevice=1
*ro.telephony.default_network=9
*ro.ril.def.preferred.network=9
*/
Then go here for audio fix
or go here <--- I am on T-Mobile and used this method..
After I was done I had LTE working so I could try out the speed differences.
Click to expand...
Click to collapse
Would the signal bars say anything aside from "H" if I'm on LTE?
lVlaciiiii said:
Would the signal bars say anything aside from "H" if I'm on LTE?
Click to expand...
Click to collapse
Honestly I use the signal text so I do not know for sure but I did see H+ once. I also use network signal info from the market to see if its on LTE/HSPA+/GPRS/Edge.
Basically if you run a speed test you can tell the difference especially when my upload speed is over 9
Hi, so today I have installed CM12.1 unofficial on my S5. I loved the rom, everything was perfect but I couldn't get LTE working. My Note 4 (N910c) gets 2 bars of indication in the same room, speed is 20mbs+. When I launch mobile data on S5, it takes long to estabilish connection, then only gets H+, and after several seconds it drops to 3G What can I do? CM is blazing fast compared to stock ROMs, but I can't imagine myself using 3G to YT/web etc... Help please! I have the newest modem/bl (BOC7).
I'm sure you've already checked your APN settings to be what your carrier advises. If not that is something to start with.
If you're on att,
Also look into your build.prop to add in/modify the following accordingly:
ro.product.model=SAMSUNG-SM-G900A
ro.product.name=klteuc
ro.product.device=klteatt
Commodore 64 said:
I'm sure you've already checked your APN settings to be what your carrier advises. If not that is something to start with.
If you're on att,
Also look into your build.prop to add in/modify the following accordingly:
ro.product.model=SAMSUNG-SM-G900A
ro.product.name=klteuc
ro.product.device=klteatt
Click to expand...
Click to collapse
I am not ATT, i'm from Poland so Soo.. weird situation today. I've been in city centre where LTE signal is pretty good. For like 3-4h it was constantly switching between 3G/H/H+, and suddenly it caught LTE. Now I am at home and it still connects to LTE, 2 bars just like in Note 4. I am pretty confused now. It seems that modem/kernel/APN are all right, maybe a kind of system trigger that "stabilizes" the signal? 3G/H+ has 5 bars here, LTE only 2. I have already put a tick to "LTE (preffered) in network options. How about this?
EDIT
Rebooted the phone, again, no LTE
Wow that is cool! I remember my CM12 used to constantly wobble between H/H+ and once I finally gave up messing with it and screen turned off for 15-20 minutes, I'd turn the screen back on and find myself on a 4G LTE signal (feeling great). Once I made a call it drops to 3G, which is normal, but after I'd hang up it wouldn't necessarily switch back to 4G any time soon.
So I gave edgarf28's XtreStoLite a shot and haven't looked back since! It is touchwiz based, but it is light, debloated, lighting fast, and it just works. I'm on XtreStoLite 2.1, and I have no complains at all.
I have the same problem on a SM-G900T running on AT&T. After every reboot can only get H/H+ leave it alone and will grab LTE 10 to 40 mins after the screen is off. Leave the screen on and won't grab LTE. And of course make a phone call you lose LTE connection. And how long it takes to get back is very random. I can't find a solution to this and got a G900T so I can run AOSP. I was tired of touchwiz and trying to get themed apps and dialers. now I am screwed I wish I could find a solution to this.
No 3g but have lte
I know this is probably in the wrong spot so I'm sorry.
I just clean flashed my sm-g900r4 to cm12.1 cyan ROM 20150428
I have working lte data but no 3g, so when I move out of lte area the signal icon just shows an exclamation point, any help would be greatly appreciated.
The way I fixed mine was by removing all apn entries I didn't need. This caused the search for LTE to speed up no issues since
Sent from my SM-G900T using Tapatalk
jskala said:
The way I fixed mine was by removing all apn entries I didn't need. This caused the search for LTE to speed up no issues since
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
I removed all but the first APN and still no 3g, just signal indicator with exclamation mark.
Thank you for your time and reply
Radiat1on said:
I removed all but the first APN and still no 3g, just signal indicator with exclamation mark.
Thank you for your time and reply
Click to expand...
Click to collapse
Why not upgrade to the latest CM12.1? I am on the October one and all the network issues are resolved.
Commodore 64 said:
Why not upgrade to the latest CM12.1? I am on the October one and all the network issues are resolved.
Click to expand...
Click to collapse
Could you provide a link, Google only turns up the page where I got the April ROM. I need klteusc.
---------- Post added at 05:23 PM ---------- Previous post was at 04:25 PM ----------
http://forum.xda-developers.com/gal...ent/rom-cyanogenmod-12-1-android-5-1-t3066252
The link purified l provided in this post says the latest build for klteusc is April?
https://download.cyanogenmod.org/?device=klteusc
Commodore 64 said:
https://download.cyanogenmod.org/?device=klteusc
Click to expand...
Click to collapse
I found that site, all the builds I see are ELEVEN not 12.1. Any ideas?
Radiat1on said:
I found that site, all the builds I see are ELEVEN not 12.1. Any ideas?
Click to expand...
Click to collapse
I really don't know why the development stopped for klteusc, but if I were to guess, I'd guess it is probably covered under another variant.
For example, since klteusc is a cdma phone I won't be surprised to see US cellular CM getting absorbed into kltespr development. But this is just a hypothetical scenario because I couldn't find any proof. But it is worth looking into if anyone is talking about it online.
Hey folks , title says it all. I switched to cm13 from chroma , performed a full system wipe including sd card. So far so good but the only problem is , gsm doesn't work. I can't switch to it. Not from the settings and not from the dialer hidden menu. When i select gsm , it immediately switches back. It's always "Wdcma Only". Is this a known bug ? I scoured xda but haven't been able to find anything.
Thanks in advance.
Edit : Flashed the stock radio from 5.1.1 to no avail , also tried the 33-1.07 hybrid modem again doesn't switch. Using the latest December 27th build.
There was a bug report in the mako CM13 thread about being unable to switch between 2G and 3G, perhaps this is the same issue?
I think someones written a patch and just waiting for it to be merged.
Can you explain to me why you want to switch between them? My phone automatically switches, if 3G is available, it uses that, if its not, it drops back to the best available 2G signal automatically. Why would you choose not to use 3G if its available and just let the phone automatically switch?
Aragorn84 said:
There was a bug report in the mako CM13 thread about being unable to switch between 2G and 3G, perhaps this is the same issue?
I think someones written a patch and just waiting for it to be merged.
Can you explain to me why you want to switch between them? My phone automatically switches, if 3G is available, it uses that, if its not, it drops back to the best available 2G signal automatically. Why would you choose not to use 3G if its available and just let the phone automatically switch?
Click to expand...
Click to collapse
What you're talking about is wcdma preferred mode. Mine is stuck on wcdma only. Which means i don't have gsm so it won't switch automatically. That and the fact that i rarely use 3g because i'm always on wi-fi somewhere , using gsm saves battery. also on lollipop 3g modem took horribly long wake locks that lasted for %70 of the idle time so i hate msm.hsic.wakelock. But if it is a known bug , i'm relieved because that should be patched soon. Without me having to restore my backup. Thanks.
Sent from my Nexus 4 using Tapatalk
boltthrower56 said:
What you're talking about is wcdma preferred mode. Mine is stuck on wcdma only. Which means i don't have gsm so it won't switch automatically. That and the fact that i rarely use 3g because i'm always on wi-fi somewhere , using gsm saves battery. also on lollipop 3g modem took horribly long wake locks that lasted for %70 of the idle time so i hate msm.hsic.wakelock. But if it is a known bug , i'm relieved because that should be patched soon. Without me having to restore my backup. Thanks.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
I just flashed CM13 on my wife's nexus 4 and I realized LTE wasn't enabled. Googled it and it seems there was an app for lollipop to enable it but it didn't work out for me.
Is it a CM13 bug thing or am I missing something?
pcaseiro said:
I just flashed CM13 on my wife's nexus 4 and I realized LTE wasn't enabled. Googled it and it seems there was an app for lollipop to enable it but it didn't work out for me.
Is it a CM13 bug thing or am I missing something?
Click to expand...
Click to collapse
It doesn't work for me too. I think it might be a bug
Sent from my Nexus 4 using Tapatalk
boltthrower56 said:
It doesn't work for me too. I think it might be a bug
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
It's a known bug. We have to wait for this patch to be merged. Keep an eye on it!
ht_tp://review.cyanogenmod.org/#/c/125897/
Thanks to Streetwalker for finding the bug.
TigTex said:
It's a known bug. We have to wait for this patch to be merged. Keep an eye on it!
ht_tp://review.cyanogenmod.org/#/c/125897/
Thanks to Streetwalker for finding the bug.
Click to expand...
Click to collapse
Thanks for the heads-up. I checked it , i think it hasn't been merged yet. So we gotta wait for tomorrow's release i guess.
Can anyone get their Nexus 4 running a recently nightly (like Jan 8th 2016) successfully switch to LTE? The fix in question was merged a few days ago.
Even though I can go into the *#*#4636#*#* service menu and successfully switch to LTE/GSM auto, or LTE/CDMA auto, and the radio *does* appear to power-cycle, it still says on 3G/H+ (so the status bar icon says). Never had this issue with CM12.
My build.prop also says my preferred network mode is 9, even after rebooting, which should keep it on LTE. Any ideas?
The only way to have LTE is to change that patch to include LTE instead of only GSM and WCDMA but since LTE isn't fully supported on nexus 4, a patch like that will never be merged.
Probably someone will make one "lte enabler" for cm13, just wait (or help)
Build with that patch
TigTex said:
The only way to have LTE is to change that patch to include LTE instead of only GSM and WCDMA but since LTE isn't fully supported on nexus 4, a patch like that will never be merged.
Probably someone will make one "lte enabler" for cm13, just wait (or help)
Click to expand...
Click to collapse
i saw this and since i wanted to figure out how to build cyanogenmod anyways, i went and built cm13 with the LTE included in where the patch discussed here should have added it. I have yet to test it on my device but thought people here might be interested in it.
let me know if it works out.
i would post a link, but since this is my first post it won't let me. i guess message me directly for it? or maybe someone can and then post the link here?
zachron said:
i saw this and since i wanted to figure out how to build cyanogenmod anyways, i went and built cm13 with the LTE included in where the patch discussed here should have added it. I have yet to test it on my device but thought people here might be interested in it.
let me know if it works out.
i would post a link, but since this is my first post it won't let me. i guess message me directly for it? or maybe someone can and then post the link here?
Click to expand...
Click to collapse
Shoot me a PM and I'll post it for you, assuming that's allowed (mods?).
zachron said:
i saw this and since i wanted to figure out how to build cyanogenmod anyways, i went and built cm13 with the LTE included in where the patch discussed here should have added it. I have yet to test it on my device but thought people here might be interested in it.
let me know if it works out.
i would post a link, but since this is my first post it won't let me. i guess message me directly for it? or maybe someone can and then post the link here?
Click to expand...
Click to collapse
lannister80 should be posting a link to it shortly, but i thought i would give an update that i did test it on my device last night and LTE does work with it. the normal issues of making sure you have the right modem and then changing it in the *#*#* thing. i had to change mine to LTE only first and then it would work when i changed it to LTE /gsm auto... but it does work.
zachron said:
lannister80 should be posting a link to it shortly, but i thought i would give an update that i did test it on my device last night and LTE does work with it. the normal issues of making sure you have the right modem and then changing it in the *#*#* thing. i had to change mine to LTE only first and then it would work when i changed it to LTE /gsm auto... but it does work.
Click to expand...
Click to collapse
https://www.amazon.com/clouddrive/s...D4HdJg40yFjrvcAwWa?ref_=cd_ph_share_link_copy
There's the link. Can I ask which commit this CM13 build is based on? Is this a nightly, something older, etc?
lannister80 said:
URL REDACTED BECAUSE I CANNOT POST LINKS
There's the link. Can I ask which commit this CM13 build is based on? Is this a nightly, something older, etc?
Click to expand...
Click to collapse
its a nightly, i might update it on a weekly basis maybe, i have not decided. i can only use the machine i am building it on sometimes.
zachron said:
lannister80 should be posting a link to it shortly, but i thought i would give an update that i did test it on my device last night and LTE does work with it. the normal issues of making sure you have the right modem and then changing it in the *#*#* thing. i had to change mine to LTE only first and then it would work when i changed it to LTE /gsm auto... but it does work.
Click to expand...
Click to collapse
Confirmed that this build does enable LTE. I did have to, as zachron mentioned, set the radio to "LTE only" first (which enabled LTE), and then "LTE/GSM auto", (which kept LTE enabled, and will hopefully jump down to HSPA+ or 3G when necessary). Switching to "LTE/GSM auto" first did not work (radio turned off, but came back on in HSPA+/3G mode).
I'll roam around today and see if I lose data at any time (when LTE isn't available).
Thanks @zachron!!
zachron said:
its a nightly, i might update it on a weekly basis maybe, i have not decided. i can only use the machine i am building it on sometimes.
Click to expand...
Click to collapse
@zachron: Can you show me what source changes you made? Maybe I can set up a github account and do a merge request with these changes. I can't fathom why this isn't included in CM13 for the N4xus 4 when it was in CM11, CM10 etc.
https://github.com/CyanogenMod/android_device_lge_mako/tree/cm-13.0
lannister80 said:
@zachron: Can you show me what source changes you made? Maybe I can set up a github account and do a merge request with these changes. I can't fathom why this isn't included in CM13 for the N4xus 4 when it was in CM11, CM10 etc.
https://github.com/CyanogenMod/android_device_lge_mako/tree/cm-13.0
Click to expand...
Click to collapse
sure.
https://github.com/CyanogenMod/andr...orks/base/core/res/res/values/config.xml#L234
i changed "<string translatable="false" name="config_radio_access_family">GSM|WCDMA</string>" to
"<string translatable="false" name="config_radio_access_family">GSM|WCDMA|LTE</string>"
as someone else mentioned, earlier in this thread though, they may not change it because the nexus 4 does not "officially" support lte
zachron said:
as someone else mentioned, earlier in this thread though, they may not change it because the nexus 4 does not "officially" support lte
Click to expand...
Click to collapse
Which is insane, because they absolutely allowed this in the last several major CM versions (12, 11, probably 10 and 9). Enabling LTE was one of the first things I did after getting my Nexus 4 in March 2013, and I was on an official CM build for years.
The "enabler" just messes with build.prop and makes some database changes to make the setting "stick" after reboot, so it must have been an allowed option when it was built (the enabler can't change that).
I don't know what the deal with the sudden change of heart is...
lannister80 said:
Which is insane, because they absolutely allowed this in the last several major CM versions (12, 11, probably 10 and 9). Enabling LTE was one of the first things I did after getting my Nexus 4 in March 2013, and I was on an official CM build for years.
The "enabler" just messes with build.prop and makes some database changes to make the setting "stick" after reboot, so it must have been an allowed option when it was built (the enabler can't change that).
I don't know what the deal with the sudden change of heart is...
Click to expand...
Click to collapse
yeah i dont disagree
zachron said:
yeah i dont disagree
Click to expand...
Click to collapse
Pull/merge request created:
https://github.com/CyanogenMod/android_device_lge_mako/pull/6
Hope I didn't screw it up, I'm new to git.
---------- Post added at 01:15 PM ---------- Previous post was at 01:12 PM ----------
lannister80 said:
Pull/merge request created:
https://github.com/CyanogenMod/android_device_lge_mako/pull/6
Hope I didn't screw it up, I'm new to git.
Click to expand...
Click to collapse
Oh damn it, I have to do it via this site (they won't merge anything submitted directly on the repository):
http://review.cyanogenmod.org/
4g now working.
davwright said:
4g now working.
Click to expand...
Click to collapse
Ok then Jan update fixed the bands
Sent from my Mi A1 using Tapatalk
LTE band 20 working
davwright said:
LTE band 20 working
Click to expand...
Click to collapse
Had you upgraded before? I am 100% stock and did not want to upgrade until 100% sure it won't screw my phone as it's essential for work, I'm being offered this update today as well and am nervous.
Yes upgraded to pie OTA without VPN and bands were missing. This morning's update is to me perfect. Can't find any bugs so far.
Got it here in Belgium. Checked and band 20 is back ?
davwright said:
Yes upgraded to pie OTA without VPN and bands were missing. This morning's update is to me perfect. Can't find any bugs so far.
Click to expand...
Click to collapse
Phew, thank for that, took the plunge and all is good
I have just checked and update available in UK.
Will hold off a day or two but looks good according to @davwright
Downloading too .. in South Africa
Five hours in now with new update and all ok. Seems a lot faster too
The correct thread for discussion around Pie release:
https://forum.xda-developers.com/mi-a1/how-to/february-update-t3743872
Try to keep things together ...
davwright said:
Five hours in now with new update and all ok. Seems a lot faster too
Click to expand...
Click to collapse
The battery appear to be lasting really well too!
Gcam works fine?
tinchola said:
Gcam works fine?
Click to expand...
Click to collapse
This GC port works fine for me: https://forum.xda-developers.com/showpost.php?p=78628964&postcount=1862