Database Users

Cyanogenmod 6.1 for GT i9000 Chat

What?
is CM finally out of development phase or smth?
Edit: As you can probably tell, I am an impatient bastard.

Is the packaged version non-rfs then?
Thanks.

Two post, two fails.
JUST READ THIS DAMN THREAD! ALL INFOS ARE STILL THERE!

Yay! Thanks Aery. I appreciate all the hard work you guys have put into this.
Well done !

Excellent stuff. I have run it since this afternoon and it's already a great improvement over the Samsung firmware.
So far I have found that it does not seem to find other Blue-tooth devices (just like it says on the buglist). I have tested with my carkit (Parrot CK3100) and will test with my laptop tomorrow.
Keep up the great work! I am so happy I have the beginning of a CM on my phone!

Thanks Aery. For me work perfectly. i'm on jp5 (new italian froyo, jpp modem). I appreciate all the hard work you guys have put into this.
Well done !
edit
Blue-tooth devices problem also for me. Volvo s80 car kit

Wow! Thank you, I have been really waiting towards this. Already flashed the earlier build but going to upgrade now Hope you guys can fix the remaining bugs too, but take your time, I know it's nerve-wrecking when some things won't come through Send you pizzas btw...

nice job, ill be sure to give this a go later today

Yay, Finally! Been keep up with the progress on this one eagerly awaiting it
Charging my phone to use it now, Good thing I don't use GPS too often

Did u all read the part "keep this thread clean"!!!
Plz use the other thread for spam, silly questions and use google code page for bug report.
Damn ppl it will drive devs crazy like that.
Ty all devs. Sry for this little spam.
Sent from my GT-I9000 using XDA App

Stock dialer is very ugly
But great job!

This version is SERIOUSLY fast compared to the old ones... lagfix definately did the trick. Used packaged .zip version.

I guess the recovery is clockworkmod right?Not the 2e!!
And when flashing with odin,no pit files and no repartition right??

mertkan said:
I guess the recovery is clockworkmod right?Not the 2e!!
And when flashing with odin,no pit files and no repartition right??
Click to expand...
Click to collapse
Yes it's Clockworkmod.
No pit files and no repartition checked, only PDA.

"flash Google Addon" you mean "12. Choose "install zip from sdcard" -> "choose zip from sdcard"" ?

Thanks Rezou

Any posts removed from the development thread have been put here.

pulser_g2 said:
Any posts removed from the development thread have been put here.
Click to expand...
Click to collapse
Thank you, again!
maybe a perma-ban for second offenders

LOL nice moderator

[Q] Unpacking system.img from Flyer RUU

Hello Nookers,
Remember that Sense 3.0 Port for Nook Project a long time ago? Well, the thread got closed because there wasn't a full product ready.
I'm almost done with my first working Sense Port, but I just need one more thing. First, lemme explain. These apps fail to works because the dump I used was an EVO View 4G dump, not the Wifi-Flyer's dump. So I have now managed to get a hold of a Deodexed Flyer RUU. I have extracted the ROM.zip containing system.img, data.img, etc. What I need now is a way to extract files from those. I have access to a Mac and PC but if ABSOLUTELY NECESSARY I will install Linux.
Thanks,
King Black Bomb.
Moo

if they are img files you can use IM disk to mount the img file on your PC. then you can access them and remove the files that you need to remove.

Dude, before you got banned two weeks ago, you said this would be done in 4 days, and you are still working on it? This is why you are not considered a credible developer.
You can use winimage to extract img files.

indagroove said:
Dude, before you got banned two weeks ago, you said this would be done in 4 days, and you are still working on it? This is why you are not considered a credible developer.
You can use winimage to extract img files.
Click to expand...
Click to collapse
As I agree with the user above about your lack of credibility I'll add some info here for you to try to achieve your task. Attached is the program I use to extract images. ALL YOU DO IS DROP THE IMG FILE ON THE EXE AND IT WILL EXTRACT.

Yes, I did say that, and it was a mistake on my part I thought I would have found the program by then. Turns out a didn't. @xboxexpert I have tried unyaffs it does not work on either Mac or Windows. WinImage? It doesn't work. For some reason it seems encrypted. Same for IMDisk.

why are you even still trying this? HTC HAS MADE SENSE OPEN SOURCE AND WILL BE RELEASED ANY DAY NOW. www.htcdev.com

luciferii said:
why are you even still trying this? HTC HAS MADE SENSE OPEN SOURCE AND WILL BE RELEASED ANY DAY NOW. www.htcdev.com
Click to expand...
Click to collapse
As I understand it, there aren't plans to make HTC Sense open source. This simply lets you write applications that make use of HTC Sense-specific APIs.

Woohoo, more free lawls! Get 'em while they're hot!
The kid has been stuck on the same step for several months, regardless of whichever RUU he stumbles upon on bittorrent. It's pretty pathetic at this point...

did you extract the exe from the rar?

paleh0rse said:
Woohoo, more free lawls! Get 'em while they're hot!
The kid has been stuck on the same step for several months, regardless of whichever RUU he stumbles upon on bittorrent. It's pretty pathetic at this point...
Click to expand...
Click to collapse
Wooo - make fun of the kid! Why would anyone want to encourage learning! I'm a hypocrite, but only this once: If you're going to reply, at least attempt to answer his question or make progress towards an answer.

As long as actual development happens. I'm all for support.
Still rocking the Incredible with the XDA Premium App.

anekdotos said:
Wooo - make fun of the kid! Why would anyone want to encourage learning! I'm a hypocrite, but only this once: If you're going to reply, at least attempt to answer his question or make progress towards an answer.
Click to expand...
Click to collapse
You really need to read his old thread to understand -- in it, I was one of the only members trying to help him... at first. He proceeded to dismiss everyone's guidance -- consistently claiming to know better -- and continued to lie about "progress" for weeks. The extent of his "development" was copying and pasting the Sense apk's into /system... seriously.
There's history here with this clown, so please save your judgments for someone else...

You can try DiskInternals Linux Reader:
http://www.diskinternals.com/linux-reader/

OK, so you need to extract system.img files. You don't have to install Linux, you can run it from a Live CD. And mount loop the .img file to a folder on your system.
Mind PM'ing me a link to the download so I can do so for you? Then you can go ahead and do the port as you would say?
-Racks

To everyone who says I'm not a dev:
I have been making progress, because at first it was complaining about audio drivers, then files in /system/etc, and it kept on going. Finally, and i THINK this is the last step, is to push Wifi-Only frameworks, apks, and the /system/etc folder.
@racks11479 thanks, but I'll only tell others to do my work if I can't. But again thanks for offering.

ikingblack said:
To everyone who says I'm not a dev:
I have been making progress, because at first it was complaining about audio drivers, then files in /system/etc, and it kept on going. Finally, and i THINK this is the last step, is to push Wifi-Only frameworks, apks, and the /system/etc folder.
@racks11479 thanks, but I'll only tell others to do my work if I can't. But again thanks for offering.
Click to expand...
Click to collapse
What are you talking about, aren't you saying you need help extracting the system.img? I'm offering to help...
Isn't that the particular request you are asking in your OP? This is a developer community, everyone here welcomes help where needed. Not one developer on this forum has ever denied any help when they were stuck on an issue.
Not flaming you, but trying to help so you can continue the port you are working on. Don't let pride get in the way of progress.
-Racks

No not pride, it's just as soon as I say yes people will say "oh, the kid need serious help. Can't even extract a system.img."

ikingblack said:
No not pride, it's just as soon as I say yes people will say "oh, the kid need serious help. Can't even extract a system.img."
Click to expand...
Click to collapse
Frankly, they have been saying that for some time now.
As it is, this thread has NOTHING to do with the nook, and needs to be closed. Frankly, i wish you would refrain from making these posts. It is obvious that you have no idea what is going on, and your posts are only serving to make this public info. I welcome everyone working on their dev skills, but strongly encourage those who are learning, to post about it in the right way....

Divine_Madcat said:
As it is, this thread has NOTHING to do with the nook, and needs to be closed.
Click to expand...
Click to collapse
It doesn't need to be closed, just moved to Q&A or General.
Sent from my Gin and Tonic using XDA App

This topic just needs to die. I saw this topic right after he created it but decided to lay low because I had hoped the topic would die out. since it seems like it wont i then must beg for people to stop posting here. Developers and other commenters have been very genorious in giving time and credibility to this poster (me excluded) and all he does in return is deny your help. He has been offered solutions like the ones given before but either he is not smart enough to handle such tasks or he is just a huge troll. So please ignore him. Please let this be the last post in this topic. This has gone on long enough and just needs to stop. If you don't then i will be forced to start posting pictures of dudes in g strings. Thank you very much
Sent from my NookColor using XDA Premium App

[PATCH] Fix Arabic [RTL] on GB 4.5.91

Hello there
I have managed to get fix Arabic on GB 4.5.91, through patching and compiling framework.jar and libwebcore.so.
This will work on every rom that is based on AT&T 4.5.91.
Here is how to patch your phone:
Manually
1) Be sure that your phone is Rooted and Deodexed.
2)Download GBArabic.zip attached and extract it on your phone.
3)Now using Root Explorer or any other root file mangers.
Copy framework.jar to /system/framework/ and fix the permissions
Copy libwebcore.so, libicuuc-arabic.so and libandroid_runtime.so to /system/lib/, and fix the permissions
Be sure that you set permission for all, or you will stuck in bootloop.
4) Reboot and enjoy.​
or
CWM Flashable File
1) Be sure that your phone is Rooted and Deodexed.
2)Download CWM-Arabic.zip attached and place it on your phone.
3)Boot into the recovery, and flash the file.
4) Reboot and Enjoy ​
p.s.
I am quite new here in the forum. So I couldn't post this on the Dev Forum.
Credits:
madmack- for his framework patcher.
Ayman Al Sanad- for his source code libwebcore.
Motorola- for source code
My Computer- for taking so much time compiling .

Changes
Changes:
7/29/2011:
Added CWM zip file

Arabic Files for CherryBlur v1.4d Rom ( it's based on ORFR and not working with At&t)
http://www.mediafire.com/?zd93z9leslz6wtc ... tested by me

Thanks Jack,
Does the Browser and Gmail show Arabic correctly in ORFR?
If it worked, I will update my post.
If not, could try and use my libwebcore.so on your phone, and report back to me?

no it's doesn't support the browser
and sorry I changed the rom and can't test the new files

Successfully Installed - CWM Version
Just flashed the CWM file. Working on Alien ROM.
Works perfectly (RTL needs some alignment "observed in Facebook App only"). Donation is on the way! Extra ordinary work and Cheers!

droidace said:
Just flashed the CWM file. Working on Alien ROM.
Works perfectly (RTL needs some alignment "observed in Facebook App only"). Donation is on the way! Extra ordinary work and Cheers!
Click to expand...
Click to collapse
Glad to hear that, it worked with you.
As for the Facebook App, I can't really help as I do not use the app .
Anyway,
Thank you, and I hope you enjoy it.
and
Ramdhan Kareem

copied the files manually while half asleep, seems that I've messed up ... was stuck in the boot screen, downloaded the automated installation file, applied it and now it works perfectly !
RTL is still not right in gmail messages, but that's super low priority

suleiman.aql said:
copied the files manually while half asleep, seems that I've messed up ... was stuck in the boot screen, downloaded the automated installation file, applied it and now it works perfectly !
RTL is still not right in gmail messages, but that's super low priority
Click to expand...
Click to collapse
What you did wrong the first time, is that you haven't set up the permission, but hey you were half sleep I won't blame you .
I just noticed the alignment of Gmail, and droidace says it happen on Facebook.
It seems that these two apps, use different files to show alignment than the browser.
I will take a look at it.
Thanks for reporting, and hope you enjoy it.

How to donate? - not really much though

droidace said:
How to donate? - not really much though
Click to expand...
Click to collapse
Thank you for the extreme generosity, I really appreciate it.
As for now, I really don't need any donations, I'm sure some people may need them.
Thanks very much, though

How did you update to 4.5.91 ? official update, SBF, OTA, other ? I am still not sure what's the safest way to go to .91 with everyone warning about bricks on this forum
how did you root/deodex ?
Sorry for my dump questions if they sounded so, But i am new into this coming from the iOS land and overwhelmed with all the terms
Thanks mdd5

Hello Ramy, and welcome.
Since you are new here, I will encourage to take a look at THE BEGINNERS (N00B) GUIDE!!!
http://forum.xda-developers.com/showthread.php?t=1154600
Now to answer your questions,
ramy_Maia said:
How did you update to 4.5.91 ?
I did update to 4.5.91, by unlocking the bootloader and flashing one of the roms here on dev section, not official.
I am still not sure what's the safest way to go to .91 with everyone warning about bricks on this forum
Everything is safe as long as you follow the guide.
many of the bricks happen here is because people updated to .91 using official then tried sbf to an older version.
When you update using official, you can't flash an older version.
how did you root/deodex ?
As of now, the only way to have root and deodex on .91 is by flashing unofficial ROMs
So you will need to unlock the bootloader and flash one.
Sorry for my dump questions if they sounded so, But i am new into this coming from the iOS land and overwhelmed with all the terms
Your question are not dumb, I was just like a couple of weeks ago.
However, it is better to ask questions like this in Atrix 4G Q&A forum, so you get better answers and faster than here. You can also use search
Thanks mdd5
Click to expand...
Click to collapse
Thanks, and I hope I helped you a little.

Thanks for the tips, i will go through the links

Alright Good Luck,
Did the new update of facebook fixed that issue?? It seems that it is fixed now.

mdd5,
I picked up your comment on my blog and I wanted to let you know that I added your Atrix GB libwebcore.so to my blog with a special note to you. If you would mind that for any reason, please let me know and I'll remove the link and recompile the sources myself.
Great work. I'm glad to see people using my blog and the sources to get Android arabized

Options of Arabic Fonts
Not really sure if there is an option to change the Arabic fonts? Any ideas?
Awesome work anyway with or without fonts

Thank you for your effort
In Alien Rom, Does it work for Write & Read or full (with menus)?
same question in Cherry Rom.

madmack said:
mdd5,
I picked up your comment on my blog and I wanted to let you know that I added your Atrix GB libwebcore.so to my blog with a special note to you. If you would mind that for any reason, please let me know and I'll remove the link and recompile the sources myself.
Great work. I'm glad to see people using my blog and the sources to get Android arabized
Click to expand...
Click to collapse
Thanks to you for providing the sources, and keep it up.
As for for the compiled lib, I wouldn't mind posting it.
It's all because of you blog, I was able to do this.
Thanks again.
droidace said:
Not really sure if there is an option to change the Arabic fonts? Any ideas?
Awesome work anyway with or without fonts
Click to expand...
Click to collapse
There is several fonts available on the Internet, I don't have any right now.
I will post it on here whenever I find one.
Ferasalsubhi said:
Thank you for your effort
In Alien Rom, Does it work for Write & Read or full (with menus)?
same question in Cherry Rom.
Click to expand...
Click to collapse
Right now, it is Write and Read only, (without the menus).
This patch will work on every rom that is based on AT&T 4.5.91.

mdd5 said:
There is several fonts available on the Internet, I don't have any right now.
I will post it on here whenever I find one.
Click to expand...
Click to collapse
So guide me here, all that I need is to find the desired font and then (Rename it to "DroidSansArabic" and replace it with the one in /system/fonts?

[Q&A] G3 Rom v3 Debloater. [Aggressive LGApps Removal] {10/25}

Q&A for G3 Rom v3 Debloater. [Aggressive LGApps Removal] {10/25}
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for G3 Rom v3 Debloater. [Aggressive LGApps Removal] {10/25}. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Getting an abort Status 6 on in PhilZ as well.
Trying to use new v3, love the idea of replacing everything with Google apps.

For some reason qabot made a q&a thread. Just post in the original. I'm no thread "Nazi".
[The|One] said:
Getting an abort Status 6 on in PhilZ as well.
Trying to use new v3, love the idea of replacing everything with Google apps.
Click to expand...
Click to collapse
Yeah, I missed a quotation mark and screwed the pooch.
Fixed now.

fr4nk1yn said:
For some reason qabot made a q&a thread. Just post in the original. I'm no thread "Nazi".
Yeah, I missed a quotation mark and screwed the pooch.
Fixed now.
Click to expand...
Click to collapse
omg that stupid **** that keeps u awake but it happens to everyone
oh i cant post to dev threads i only have 7 posts, from the beginning on i was just reading and reading and then i wantet to help in dev threads and it said u have to have 10 posts and i think **** so i only post once upon a time, mb i get more post active when i reach my 10

[The|One] said:
omg that stupid **** that keeps u awake but it happens to everyone
oh i cant post to dev threads i only have 7 posts, from the beginning on i was just reading and reading and then i wantet to help in dev threads and it said u have to have 10 posts and i think **** so i only post once upon a time, mb i get more post active when i reach my 10
Click to expand...
Click to collapse
Post here 3 more times, [emoji28]

Haha okay mate but i try to do a litte useful:
I flashed ur .zip and i seemed not to work properly, several LG Apps who should heave been deleted - i checked the script ( i dont know much about scripts but i can understand patterns ) - were not deleted for example the quickmemoplus, the remote and the fm radio app, i dont understand this i flashed over clean OptimusG3 1.4

[The|One] said:
Haha okay mate but i try to do a litte useful:
I flashed ur .zip and i seemed not to work properly, several LG Apps who should heave been deleted - i checked the script ( i dont know much about scripts but i can understand patterns ) - were not deleted for example the quickmemoplus, the remote and the fm radio app, i dont understand this i flashed over clean OptimusG3 1.4
Click to expand...
Click to collapse
The remote was never deleted, quick memo is a "bug" and I left fmradio, I actually commented it out, as some use it. In v3a quick memo, lg clock and fmradio will be deleted.

fr4nk1yn said:
The remote was never deleted, quick memo is a "bug" and I left fmradio, I actually commented it out, as some use it. In v3a quick memo, lg clock and fmradio will be deleted.
Click to expand...
Click to collapse
sry remote was my mistake am still a little sleepy, but lg home should have been deleted as it installs the google laucher?

[The|One] said:
sry remote was my mistake am still a little sleepy, but lg home should have been deleted as it installs the google laucher?
Click to expand...
Click to collapse
Lg home, lg keyboard, and lg application manager can not be removed. It causes severe problems on a clean flash or if a factory reset is done. The system goes into a eternal set up loop as it won't set Google now launcher or keyboard as default reliably. You missed the great nexus edition debacle of 2014.

Okay now I understand must have missed something what was this great debacle?

i'm having error 491 trying to update play store services :\

[The|One] said:
Okay now I understand must have missed something what was this great debacle?
Click to expand...
Click to collapse
It didn't work! [emoji79]
Every time I flashed and thought I had it something sorted out another issue arose. It was either no keyboard, or the setup loop.
Basically the ROM need to launch the EULA to let you in and it won't do that if lghome and/or application manager isn't there.
Replacing the keyboard was just as flakey.
bllon745 said:
i'm having error 491 trying to update play store services :\
Click to expand...
Click to collapse
Anyone else? Shouldn't have anything to do with this as it doesn't touch anything but lg apps and services.

Haha I again yes I got 491 too, didn only happen after flashing the remover, can't give further details cuz u reverted to my last backup pardus HD need that stable with everything working

Thanks for the script. Tried it out last month and it was mostly great. I'm wary of using it again, though. My main issue (other than the build.prop edits) was that it caused the hidden settings menu not to work. Can anyone confirm that it still works after flashing the script? (I'm on a D802 if that makes any difference.)

i can test after the new release

Thank you for your Best of the work. however if you add some description after each apk it will be really apperciated. i know you added some but most of them are not commented so i did debloat some of the nesssary app:crying: i have to reflash the whole rom to make them back.

angryolk said:
Thank you for your Best of the work. however if you add some description after each apk it will be really apperciated. i know you added some but most of them are not commented so i did debloat some of the nesssary app:crying: i have to reflash the whole rom to make them back.
Click to expand...
Click to collapse
Sorry, but it was documented that most lg apps would be uninstalled, and the big ones people might miss was put in the op. Having a backup as well.

FC Samsung apps

Hi.
I was busy debloating and I've gone a bit too far.
All samsung apps which index the file system force close on me.
Gallery, My Music, Videos, My Files...
Do any of you know which framework, service or apk they all rely on?
Thanks.

rayone said:
Hi.
I was busy debloating and I've gone a bit too far.
All samsung apps which index the file system force close on me.
Gallery, My Music, Videos, My Files...
Do any of you know which framework, service or apk they all rely on?
Thanks.
Click to expand...
Click to collapse
Wrong thread!!!

yussuf007 said:
Wrong thread!!!
Click to expand...
Click to collapse
You mean forum.... it's development bcos I'm building a bloat free SD English ROM, and I can't figure out which of the 589 files I've removed is causing the Samsung app fc's.
But I'm also more than happy for a mod to move it the thread.

I agree that this is wrong forum/thread. If CM12 PORTING thread was moved from development thread even though there was clearly active/documented development going on on a daily basis simply because Mods could see a working ROM at the time then this thread definitely needs to be moved or I declare shenanigans!
Anyway, have you thought to pm SkywakerZ? He has developed the SmartDebloater Tool so he may be able to give you a hint of what you can and can't safely delete.

rayone said:
You mean forum.... it's development bcos I'm building a bloat free SD English ROM, and I can't figure out which of the 589 files I've removed is causing the Samsung app fc's.
But I'm also more than happy for a mod to move it the thread.
Click to expand...
Click to collapse
Sorry for the trolling, but read the rules. If you have a question then ask it in the Q & A .
And i just recomended if you dont know the answer for your question dont try building roms.

Eddster3000 said:
I declare shenanigans!
Anyway, have you thought to pm SkywakerZ? He has developed the SmartDebloater Tool so he may be able to give you a hint of what you can and can't safely delete.
Click to expand...
Click to collapse
OK, sorry for posting the wrong forum.
I've seen SmartDebloater, but it doesn't go deep enough also it (and all the other scripts) don't remove knox properly... (/init.container.rc needs to be addressed) and boot still requires a knox encryption class.
I wish there was a tool like procmon in windows for Android.
If nobody knows which framework or component all those Samsung apps require I'll just put everything back and start again.
yussuf007 said:
i just recomended if you dont know the answer for your question dont try building roms.
Click to expand...
Click to collapse
making roms (system updates) is easy I've been doing it 1/0 since Win CE, XDA 2 (WinMo 2003). Making generic roms which everyone likes and answering their questions is hard.
[Update] Nothing in priv_app, app, framework or lib fixes my issue even with f.reset. So I'm stumped but I think it might have something to do with knox.