Database Users

[recovery][p7300/p7310] twrp 2.7.1.0

Only for P7300/P7310. Not compatible with LTE tablets!
So, quick and dirty instructions for users WITHOUT any form of CWM or TWRP recovery on their device:
1) Download recovery.tar.md5 for your device
2) Reboot the tab into download mode
3) Fire up Odin 1.85 and put the recovery.tar.md5 in the PDA field.
4) Flash!
5) Reboot into TWRP
Quick and dirty instructions for users WITH some form of CWM or TWRP recovery on their device:
1) Download twrp_p5.zip or twrp_p5wifi.zip to your device
2) Reboot the tab into recovery
3) Install the zip
5) Reboot
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Odin images:
P7300: http://demongloom.dyndns.info:81/misc/GT89/TWRP2710/p5_odin/recovery.tar.md5 Mirror: http://d-h.st/sC3
P7310: http://demongloom.dyndns.info:81/misc/GT89/TWRP2710/p5wifi_odin/recovery.tar.md5 Mirror: http://d-h.st/vb7
ZIP to install from CWM or old TWRP:
P7300: http://demongloom.dyndns.info:81/misc/GT89/TWRP2710/twrp2710_p5.zip Mirror: http://d-h.st/Pjt
P7310: http://demongloom.dyndns.info:81/misc/GT89/TWRP2710/twrp2710_p5wifi.zip Mirror: http://d-h.st/VI8
Old versions:
2.6.3.0
Odin images:
P7300: http://demongloom.dyndns.info:81/misc/GT89/p5_odin/recovery.tar.md5 Mirror: http://d-h.st/Xj4
P7310: http://demongloom.dyndns.info:81/misc/GT89/p5wifi_odin/recovery.tar.md5 Mirror: http://d-h.st/TYY
ZIP to install from CWM or old TWRP:
P7300: http://demongloom.dyndns.info:81/misc/GT89/twrp_p5.zip Mirror: http://d-h.st/kPK
P7310: http://demongloom.dyndns.info:81/misc/GT89/twrp_p5wifi.zip Mirror: http://d-h.st/zyW
Thanks to C-o-M for his kernel source, TeamWin for TWRP, alterbridge86 for his installation instruction and omarainea for mirrors.

Thank you for sharing this, it's awesome and working like a charm
but it is so hard to download from this website, even though usually I don't face any problems in downloading from where I am,
I tried to use proxies but couldn't reach the files, the only way to get them was by creating a mirror by Dev-Host using upload by URL
I think it will be hard for others to download it, so can I share the Dev-Host mirrors here ??
thank you again for your work:fingers-crossed:

omarainea said:
Thank you for sharing this, it's awesome and working like a charm
but it is so hard to download from this website, even though usually I don't face any problems in downloading from where I am,
I tried to use proxies but couldn't reach the files, the only way to get them was by creating a mirror by Dev-Host using upload by URL
I think it will be hard for others to download it, so can I share the Dev-Host mirrors here ??
thank you again for your work:fingers-crossed:
Click to expand...
Click to collapse
Yes, any mirrors are welcome. I'll add them to OP.

DemonGloom said:
Yes, any mirrors are welcome. I'll add them to OP.
Click to expand...
Click to collapse
Ok then, here are the mirrors:
Odin images:
P7300: http://d-h.st/Xj4
P7310: http://d-h.st/TYY
ZIP to install from CWM or old TWRP:
P7300: http://d-h.st/kPK
P7310: http://d-h.st/zyW

First of all, thanks for our work.
Just a quick question: any particular reason to build v2.6.3.0 and not the lastest 2.6.3.3? I have installed 2.6.3.3 in my N4 and it works fine.

jolinnard said:
First of all, thanks for our work.
Just a quick question: any particular reason to build v2.6.3.0 and not the lastest 2.6.3.3? I have installed 2.6.3.3 in my N4 and it works fine.
Click to expand...
Click to collapse
2.6.3.3 does not exist Latest source says 2.6.3.0. There were a few updates without version change, so device maintainers bump version on their own.

Thank you demongloom. Is this twrp safe and tested (flashing/wiping/restoring) ? I wouldn't end up bricking the tab as happened to kaltkaffe with early versions of cwm 6.x...

zooster said:
Thank you demongloom. Is this twrp safe and tested (flashing/wiping/restoring) ? I wouldn't end up bricking the tab as happened to kaltkaffe with early versions of cwm 6.x...
Click to expand...
Click to collapse
I use that version for about three months. Works great, no problems. I've used 2.4 version for much longer time. TWRP got patches for mmc brick bug long time ago.

Just tried, but I've noticed 2 things:
1) if I go in restore it doesn't show up my backup that is located in clockworkmod folder
2) I don't find the option to choose backup mode, incremental or tar

zooster said:
Just tried, but I've noticed 2 things:
1) if I go in restore it doesn't show up my backup that is located in clockworkmod folder
2) I don't find the option to choose backup mode, incremental or tar
Click to expand...
Click to collapse
TWRP uses its own backup locations/formats. No incremental backup support in TWRP, sorry.

How does it behave with downgrade from >4.2 to 4.1 or lower? Is it like cwm 6.0.x where we have to manually do adb commands to move sdcard folder from /0 to legacy location?

zooster said:
How does it behave with downgrade from >4.2 to 4.1 or lower? Is it like cwm 6.0.x where we have to manually do adb commands to move sdcard folder from /0 to legacy location?
Click to expand...
Click to collapse
Every recovery behaves the same way. Downgrading from 4.2 to 4.1 requies either adb commands or moving files with file manager.

Thanks for this. Way better than having to use volume rocker and power button in CWM.

Just a thought, since this recovery does not provide for incremental backups, would it be possible to use the data portion of a newer backup and merge that with the system/boot portion of an older backup and restore them altogether?

iZLeeP said:
Just a thought, since this recovery does not provide for incremental backups, would it be possible to use the data portion of a newer backup and merge that with the system/boot portion of an older backup and restore them altogether?
Click to expand...
Click to collapse
You can backup any partitions you want and restore them in any combination. So yes, you can make backup of system partition and then backup only /data. Just don't forget to make new /system backup after upgrading to new firmware.

DemonGloom said:
You can backup any partitions you want and restore them in any combination. So yes, you can make backup of system partition and then backup only /data. Just don't forget to make new /system backup after upgrading to new firmware.
Click to expand...
Click to collapse
Thanks for the confirmation. Did this and it works with any combination of boot/system/data since the md5 is only related to the partition backup and not the whole nandroid backup.

iZLeeP said:
Thanks for the confirmation. Did this and it works with any combination of boot/system/data since the md5 is only related to the partition backup and not the whole nandroid backup.
Click to expand...
Click to collapse
MD5 check is not a problem, as it checks backup file, not partition after restore. Also you can just remove mark from "check md5" checkbox.

DemonGloom said:
MD5 check is not a problem, as it checks backup file, not partition after restore. Also you can just remove mark from "check md5" checkbox.
Click to expand...
Click to collapse
Didn't know that. Will do as suggested.

Many thanks for this. Glad to have the option to use twrp recovery!
Sent from my GT-P7310 using XDA Premium 4 mobile app

@DemonGloom Just a minor glitch/problem, if I call it that; power-off in reboot menu does not work, instead it restarts the system. Though, nothing to worry about, just surprised that tab didn't shutdown. I checked it again, and it actually restarts the system.

[MT6582] MATERIAL V3 [ROM] Micromax A120 [Wiko]

Hey fellas! Here i present you another ROM ported & fixed by me for Micromax A120 (Wiko Base). Credits goes to original dev Jeff Rivera for developing such a beautiful ROM.
FEATURES:
* Based on Kitkat 4.4.2
* Completely themed like Android L
* Better RAM management
* Listview Animation
* Brightness slider in notification tray
* Inbuilt Advanced control in settings
* PAC PERFORMANCE inbuilt in settings
* Network Monitor
* Added Android L Easter Egg in settings
* Rest explore yourself!
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
VIDEO REVIEW HD
INSTRUCTION TO FLASH MATERIAL V3 ON Micromax A120:
1. You must be on wiko base.
2. Boot into recovery and wipe/system, wipe/data. If you're on Philz recovery, choose clean to install a new ROM. Yes, this is the first ever full rom for wiko base. [emoji23]
3. Now select Install zip and browse to the location where you have MATERIAL V3 ROM zip and install it.
4. Reboot!
DOWNLOAD LINK: Material V3
MIRROR (G.Drive)
For latest screenshots of Material V3, go here.
Note: I removed browser from the ROM, chrome was eating space. Install any browser according to your need.
CREDITS: @moonrotation for testing
@smokerman for Video Review
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x (STOCK)
Version Information
Status: FINAL
Current Beta Version: 3
Final Release Date: 2015-02-22
Created 2015-01-20
Last Updated 2015-02-22

ADD ON:
=> If you don't like the current system UI, and you want to revert to the old one, flash this.
=> If you want to revert back to the latest (v3 system ui), flash this.
FAQ:
Q: Force closed when setting Profile picture ?
A: Edit your picture in a photo editor and resize it smaller 50% than original size/resolution .
Q: How to enable multiuser ?
A: Edit build.prop on System folder find (fw.max_users=1) change to (fw.max_users=4)
Q: How to show/hide quick settings?
A: See this
For best performance: Flash WR-Kernel after flashing the rom.
Credits: @moonrotation & @Siddhesh.K15 for the kernel

For Material ROM updates. Join this Material group.

this is what im waiting for :good::good::good:

Thread updated with download links

Nice look bro! Testing soon :good:

what was the fix zip for?
gonna test this later :laugh::laugh:

gunzgunz said:
what was the fix zip for?
gonna test this later [emoji23][emoji23]
Click to expand...
Click to collapse
Well, the original dev made superuser inbuilt in settings which was not giving proper root rights. So, i removed superuser. That fix zip, is an updated version of settings without that root column in advanced>tool section. Also, flash the fix zip after first boot, after setting things up. If you flash it right after flashing the rom, setup wizard will force close. Good luck ?

mr-illusionist said:
For best performance: Flash WR-Kernel after flashing the rom.
Credits: @moonrotation & @Siddhesh.K15 for the kernel
Click to expand...
Click to collapse
which kernel should i use? v1 or v2?

ktsarlz said:
which kernel should i use? v1 or v2?
Click to expand...
Click to collapse
Use the latest one (v2). It works fine without any issues. Also, more io schedulers are there in it. ?

mr-illusionist said:
Well, the original dev made superuser inbuilt in settings which was not giving proper root rights. So, i removed superuser. That fix zip, is an updated version of settings without that root column in advanced>tool section. Also, flash the fix zip after first boot, after setting things up. If you flash it right after flashing the rom, setup wizard will force close. Good luck
Click to expand...
Click to collapse
so what im going to do now is
wipe > flash rom > let it boot > reboot to philz > flash fix zip > flash WR-kernel
or shall i reboot again after flashing fix zip then reboot then philz then flash WR-kernel?
sorry im noob

How can I go to recovery mode? After I flashed the rom zip, When I click volume up and down it goes to Factory Mode? Or maybe the combination is changed?

gunzgunz said:
so what im going to do now is
wipe > flash rom > let it boot > reboot to philz > flash fix zip > flash WR-kernel
or shall i reboot again after flashing fix zip then reboot then philz then flash WR-kernel?
sorry im noob
Click to expand...
Click to collapse
wipe > flash rom > let it boot > reboot to philz > flash fix zip > flash WR-kernel you can do this. no issues. :good:

ktsarlz said:
How can I go to recovery mode? After I flashed the rom zip, When I click volume up and down it goes to Factory Mode? Or maybe the combination is changed?
Click to expand...
Click to collapse
no the combination is same. power button + volume+ + volume-

mr-illusionist said:
no the combination is same. power button + volume+ + volume-
Click to expand...
Click to collapse
What rooting method should i use for this?

ktsarlz said:
What rooting method should i use for this?
Click to expand...
Click to collapse
always flash this zip for rooting kitkat roms. http://www.androiddevs.net/mediatek-rooting-issue-fix-kitkat-roms/

rom cant detect internal sd card. Also Mp rio repartition doesnt work
Problem solved. Turns out Wiko has emulated partition and the internal storage can be used for both apps and files

SaffatBokul said:
rom cant detect internal sd card. Also Mp rio repartition doesnt work
Click to expand...
Click to collapse
This problem is with most of the ROMs based on wiko due to emulated partition. You'll be notified as soon as we get any fix for it.
And no need to repartition internal storage on wiko base, it can be used for both purposes, as app memory and as internal storage.

FIxed storage issue
I eventually fixed storage issue, now 3rd party apps like es file explorer detect internal sd. Full rom will be updated soon with all the bugs fixed (including bluetooth soon) Stay tuned guys!

All the bugs eventually fixed by me, even the storage issue which has been causing trouble to us since a long time. Enjoy!

[RECOVERY] TWRP 2.8.x.x for Walton Primo S2

Team Win Recovery Project 2.x or twrp2 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
VIEW LATEST CHANGELOG HERE: Official Changelog Site
Fixes for Primo S2:
- Take Nandroid on your Internal or External SD Card
- Flash Zip From Both of your SD Card
XDA:DevDB Information
Walton Primo S2 Development, Tool/Utility for all devices (see above for details)
Contributors
OdSazib, tuxboy, Rohan Taneja, Syed Md Moinuddin
Source Code: https://github.com/TeamWin/Team-Win-Recovery-Project/
Version Information
Status: Stable
Current Stable Version: 2.8.5.0
Stable Release Date: 2015-02-21
Beta Release Date: 2014-04-19
Created 2015-02-04
Last Updated 2015-02-21

Instructions & old files
Old Recoveries:
★PrimoS2-TWRP-2.8.4.0.7z - 10.47 MB
★New Bugless Recovery With SELinux Enabled
★Based on Stock Kernel-Bugless, No SELinux Support
★Based on CM11 Kernel-Buggy, SELinux Support
Flashing Instructions:
You Can use Flashifyapp from Playsrore to flash this withing your device if it's rooted
How to use Flashify?
-Download app by clicking the big word 'Flashify' from above
-Download Recovery File from avobe link.
-Extract files with 7z or ES File Explorer
-Copy twrp-recovery.img/recovery.img to root of your phone storage
-Open Flashify and grant root acces for it
-Click Flash recovery>chose file from sd card
-Select twrp-recovery.img/recovery.img and flash
-Reboot into recovery, Done
→CM Kernel based recovery is fully stable when you are on 4.4.4 based rom, u can use it while on stock rom but delete batterystat.bin before booting to stock rom, that will resolve issue before boot. Cz different kernel write different stat file.
→I suggest to download stock kernel based as you are on stock kernel, Cz cm kernel write different batterystat.bin which generates problem with battery calibratio. Though it you will happg to use CM recovery after getting stable CM
OR, follow flashing scripts writen by @tuxboy
WINDOWS
-Make sure you have the drivers installed.
-Download and extract the zip file linked above.
-Connect your phone to you PC via USB cable, make sure USB --Debugging is switched on.
-Double click on the "flash-windows" (located inside the extracted folder) file.
Done!
Mac OS X
-Make sure you have the drivers installed.
-Download and extract the zip file linked above.
-Connect your phone to you PC via USB cable, make sure USB --Debugging is switched on.
-Open your Terminal app, drag and drop the "flash-mac.sh" file (located inside the extracted folder) on to your terminal.
Done!
LINUX
-Make sure you have the drivers installed.
-Download and extract the zip file linked above.
-Connect your phone to you PC via USB cable, make sure USB --Debugging is switched on.
-Open your Terminal, drag and drop the "flash-linux.sh" file (located inside the extracted folder) on to your terminal.
Done!
ATTENTION:
After First boot into recovery please select your storage either Internal Disk or External Disk, Don't Select Internal Storage. In default you should find it Internal Storage which you r suggested changing to Internal/External Disk

Amazing!
Good going bro! You will get cm stable soon

Rohan Taneja said:
Good going bro! You will get cm stable soon
Click to expand...
Click to collapse
Hoping soo Bro
Actually I have less resources and time to work

Good work! Thank you very much!!

Needed badly. Thanks to the devs

Great job guys
:good: Great job Sazib vai & everyone.
***********************************************
Current Device: Walton Primo S2
SOC: Qualcomm Sanpdragon 400 MSM8228
Root Access: Yes
***********************************************

CM 11S 05Q OTA Zip

OnePlus One CM 11S 05Q
DOWNLOAD NOW
The ZIP file for the update can be downloaded from this URL. You should be able to apply it in recovery as long as you're stock.
Please join all the spaces as I cannot post outside links:
builds .cyngn .com /fota /incremental /bacon /cm-bacon-5fa8c79c0b-to-5229c4ef56-signed.zip
Steps to Install
1. If Developer Options is not enabled, go to Settings--> About Phone and Tap build 6-7 times. Go back to Settings to see the Developer Options Menu.
2. Select Advance Reboot from Developer Options.
3. Copy the downloaded OTA file to internal memory.
4. Reboot your phone to "Recovery"
5. Select the option to Apply Update--> From Internal Memory--> select the OTA file you have downloaded.
6. Select Install/Yes and wait for 4-5 minutes.
7. Once the phone has rebooted, please do reboot once again to optimise the cache.
8. Thats it you are ready to go.!!!
David S. From OnePlus Says "Today the latest OTA CM 11S release, 05Q, will start rolling out to our users. This one is packed with new features and fixes to some known issues. With this update you will see that there are improvements to BlueDroid, an updated configuration for NFC, updated media codecs (as well as enabled WMA DSP and AAC codecs), and a few security fixes. Furthermore, SwiftKey and MaxxAudio by Waves, which have always been a OnePlus staffer favorites when it comes to keyboards and sound performance, are now an integrated to the OnePlus experience with this update.
As we continue to improve the camera on the One, there are now three video focus options: auto, continuous, and infinity. Other things that were added include regulatory information, audio output latency optimization, LED overlays, and an ANT+ library. We also removed some features, such as unused key layouts, references to non-existent ringtones, unused strings in CMAccount, and the option for a silent alarm ringtone. Translations have also been improved in Apollo, CMAccount, and the system in general."
List of changes:
Recovery:
Fixed dab with Linux 3.10
Improved ADB Sideload
Improved wipe confirmation screen layout
Improved progress bar
General:
Fixed wrong emergency call property
Improved audio policy flexibility
Increased void volume
Improved light controls
Updated WCNSS configuration
Upgraded ADCB Files
Powered HAL improvements
Upgraded SQLite to version 3.8.6
Reduced volume increment/decrement step per click
Added support for Query SIM SMS capacity
Upgraded TP firmware to 14001220
Fixed headset insert/remove crash
Fixed ability to hang up a call from a wired audio headset
Set Up:
SetupWizard: Allow turning on mobile data if off by default
FileManager:
Fixed force close when sharing multiple files over Bluetooth
FOTA:
Displays download size as a decimal prefix
Enabled scrolling on the system update screen
Added Download clicked notification
Shows download size on UI
Updated Icons
Added progress bar
CameraNext:
Added letterbox view for to show actual capture in preview
Added toast information to aid in first time use of Continuous shot
GalleryNext:
Additional supported video types
Dialer:
Blacklist, strip extension from number
Fixed screen rotation behavior during call
Clock:
Call events can be handled on alarm
Fixed city and time zone entries

http://builds.cyngn.com/fota/incremental/bacon/cm-bacon-5fa8c79c0b-to-5229c4ef56-signed.zip there you go

Just flashed the OTA with no issues. Let's see how it performs compared to 44S, specially the radio.

TWRP tells me that gps.conf was changed and update failed. Always something.

What folder in the internal memory should I use?

Please advice
I am on 44S... I have rooted the device and having teamwin recovery...... Can I simply flash this OTA.zip???

TWRP
Doesnt flash with twrp for some reason.. gives an error with updater binary!

If I'm already using SwiftKey should I uninstall it before update?
sent using Tapatalk

When?
When will the stock rooted 05Q ROM be released like it was released for 44S from Calkulin ?

did u manage to flash it? im rooted and twerp too and dno how to

i am stock and unrooted, will i wipe everything if i flash it?

aspico said:
i am stock and unrooted, will i wipe everything if i flash it?
Click to expand...
Click to collapse
i think if u wipe it it will get wiped
if u just flash on top of it u should be fine

For Indian users :
1. Download this cm-11.0-XNPH44S-bacon-signed-fastboot .
2. extract the zip and run the following 'fastboot flash boot boot.img' and 'fastboot flash system sytem,.img'.
3. Download OTA-UPDATE-05Q and transfer to phone.
4. Reboot phone to recovery i.e. hold power and vol down until you reach the oneplus logo.
5. Select the option to Apply Update--> From Internal Memory--> select the OTA file you have downloaded or you can do adb sideload.
6. Select Install/Yes and wait for 4-5 minutes.
7. Once the phone has rebooted, please do reboot once again to optimise the cache.
8. Thats it you are ready to go.!!!

Honestly there are about 4 other threads open with the OTA update and instructions on how to flash. Every single question on page 1&2 has been asked in nauseum throughout xda guys.. For crying out loud search it won't kill ya.
Its an OTA of course it won't wipe everything has any OTA ever wiped out your whole system
How can you get an answer to when stock rooted will be done when the guy that does it don't know. When it's ready its ready that simple
You need a complete stock OS with no changes to any SYSTEM files to be able to successfully flash OTA or else it will fail in recovery TWRP or any of them.
Lastly OP why post a zip when you know you have not reached your limit. If people are too lazy to search for answers the extra steps you created definitely will only cause extra issues. Thx for your contribution though

*Facepalm
Flash it like a regular Rom. Zip file through custom recovery.
WARNING: PEOPLE ARE HAVING ISSUES AND GETTING ERRORS IF THEY PREVIOUSLY INSTALLED EXPOSED FRAMEWORK AND TAMPERED WITH THE FRAMEWORK SETTINGS. THEN DON'T FOLLOW THESE STEPS!! ONLY PEOPLE WHO HAD A COMPLETE STOCK, UNLOCK BOOTLOADER, ROOT, CUSTOM RECOVERY SHOULD BE FINE!!
*these are the steps I did and I'm running everything fine on my end*
..On Stock 44s Build..
If already unlock bootloader, root, custom recovery..
-download the zip file
-place it in the internal storage
-(if you want root *download the latest supersu.zip file) other wise you will have no root! Place that in the internal storage as well
-boot into recovery (I'm using the latest twrp recovery)
- MUST WIPE FACTORY DATA RESET, WIPE DATA & CASHE!!
-flash rom
-flash supersu
-reboot and you should be on the new ota with root

Flashed over stock without a problem.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sent using Tapatalk

Aniket.t20 said:
Doesnt flash with twrp for some reason.. gives an error with updater binary!
Click to expand...
Click to collapse
I had same issue as md5 verification was checked by default and its was failing because of that. When you uncheck and flash it works fine.

Please do not create duplicate threads. A thread with the same topic already exists. It can be found here.

Coolpad Toolkit [Utility][Open Source]

Hey Guys This is KP and its a long time I haven't payed attention to my second successful project i.e Coolpad Toolkit. Actually I was so busy in other tools that I couldn't update this.
So This is the day As Many user requested for bug fix of this Tool, I came up with this Update and a fantastic thing i.e Now it is available as Open-Source , All of you can view its code on github. This is for the new batch programmers who want to make their own toolkit seeking some good info from us.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I think It will be the last release of This Toolkit, I think I may rarely provide some updates for this tool if anyone report me bugs or a feature request. So Enjoy it.
This Will be an Whole Setup File no need to update it from the Tool itself as I found that was very tedious job to do.
Requirements :
* Free space of 163mb (setup 93mb)* Free space of 163mb (setup 93mb)
* A basic knowledge in Batch file means hoe to use it
* Adb Drivers (package included)
* Coolpad Drivers (included)
* USB cable
* USB debugging mode enabled from developer options in settings
Download Links in the 4th Post

Features
Features​~ Supports Most of Coolpad Phones
~ Basic Toolkit is added for unsupported Coolpad Devices
~ Automatically Install ADB / FASTBOOT drivers
~ Install Coolpad and SP Drivers required
~ Display Connected device Full Information (model, manufacture, etc.)
~ Backup your Full Device without rooting
~ Restore your Full Device needs Root
~ Unlock Bootloader, Relock Bootloader
~ Root your Device, Unroot, Check root status
~ Flash Custom Recovery (TWRP, CWM, Philz if available)
~ Install Busy box on your device
~ All in one Option is provided for Rooting, Unlocking Boot loader, Flash Custom Recovery, Install Busybox
~ Download Coolpad Stock Rom from best server
~ Flash Coolpad Stock Rom by Sideloading, or SP flash tool
~ Boot to Custom Recovery Without permanently flashing it
~ Boot or Flash .img files to your device
~ Install, Sideload A zip file using Sideload via Stock or custom recovery
~ Install Xposed Framework on your device
~ Install Apk to device
~ Push / Pull files from device to PC or PC to device
~ Set File Permission for selected Folders
~ Logcat Functions : Check logcat, report bugs, save into text file, etc
~ Extract / Rebuild your System.img file of FIRMWARE
~ Developer Tools for support of some function
~ Explore Extra Tips and tricks your device
~ Some Mods for your device
~ Get your whole device Information
~ Custom Reboot options
~ Information , Help, Faq Section
~ Customize your toolkit with settings
~ Auto Updating Toolkit When Found Internet Connection
~ Some Plugins for Rom Editing (very tasty)
~~ Many More,,​
If you Want me To ADD More Reply Here​

How to Use My Toolkit / GUIDES​
1. Basically Very Easy, if you have previous versions of this tool, just Completely Uninstall it by clicking on Uninstall.exe or from control Panel.
2. Then Download the latest build i.e 1.6 setup from the main webpage from below then.
3. Once installed, extract the zip and then install Setup.exe file as Admin in normal way (very imp to run it as admin, otherwise there are some chances that it may not work).
4. Once installed, you can then proceed to the driver installation for your phone, so launch the Toolkit.exe from the source directory and then use letters to type in there and press enter for a function to load.
5. So as we are installing Drivers for device, from the menu Type DR and press Enter from there install Coolpad drivers maybe option 7 and Enter. Then restart your pc. Then install downloadable Google USB installer from option 2. Once everything is done, you can further refer to the guides given in the post.
Important and Useful Guides​How to Perfectly Set Up Toolkit (VERY IMP) mod edit - links removed
More Guides Will be Added​

Could this tool be modified to support newer LG devices? This tool would really help as many of us are stuck without fastboot or even the ability to even use our bootloaders
Sent from my LGLS676 using Tapatalk

Changelog​
version 1.0
*Initial Release
version 1.1
*MAJOR BUG about fastboot not being detected and used
*MAJOR BUG about adb not working in recovery
*Bugs in Installing Google usb drivers
*Bugs Fixes In Xposed Modules
*Bugs in Mods Section while installing Dolby atmos
*Added Toolkit Synchronization To optimize More Fast
*Added Smart Driver Installer
*Added Kingroot Replacer zip with supersu
*More Stable
version 1.2
*Added Support for Coolpad Note 3 Plus
*Added Safe Sideloading / Flashing Method
*Added Quick Fix for Encrypted MM rom
*Added Rom Porter Tool
*Added Deodexer Tool
*Added Plugins Menu
*Now Mods Sections is directly embeed
*Bugs Fix in Smart Updater
*Bugs Fix in Note 3 lite mm twrp Recovery
*Very Stable
version 1.3
*Some Major Option Fixed
*Syncronising Option Bugs Fixed
*Very Close to Stable
version 1.4
*Flash Recovery Bugs Fixed and More Safe (Noobs)
*Xposed Flashing zip Fixed (Now no bootloops)
*Bug Fixes
*Very Very Close to Stable
version 1.5
*Fix Backing Up Bugs in Backup Menu
*Fix Bug in Decrypting MM Phone
*Fix Bug in Flashing Recovery 6.0 Phones
*Fix Updater Script and made built-in only
(Now updates can be installed directly from toolkit itself)
*Fix MAJOR Bugs in Basic Toolkit
*Added New Backup Method as per Android 6.0
*Added Automated Option for Checking Updates (need net connection)
*Added New Flash Methods for .zip files via TWRP Tweaks
*Xposed Now can be installed in 14 secs (no bootloop)
*Sideloading zips has been replaced with New Flash methods
*Updated Xposed Installer app
*Updated SuperSU zip to 2.79 with some tweaks (xda)
version 1.6
*Fix Some Potential Bugs
*Fix Error in Decryption or Phone
*Updated Some Libraries
*Added Auto Sideload fix for Flashing Zips
*Added Some Plugins
*Made an Open Source
*Completely Stable Now
mod edit - links removed
mod edit - links removed

Sands207 said:
Could this tool be modified to support newer LG devices? This tool would really help as many of us are stuck without fastboot or even the ability to even use our bootloaders
Sent from my LGLS676 using Tapatalk
Click to expand...
Click to collapse
Yeah Sure Its Baisc Version Option 99 Will Really Help you Guys Which is Basic Toolkit Supports Every Android Device

[email protected] said:
Yeah Sure Its Baisc Version Option 99 Will Really Help you Guys Which is Basic Toolkit Supports Every Android Device
Click to expand...
Click to collapse
Stellar!! Thank you!

[email protected] said:
Yeah Sure Its Baisc Version Option 99 Will Really Help you Guys Which is Basic Toolkit Supports Every Android Device
Click to expand...
Click to collapse
oh i just got your joke.. funny..

Sands207 said:
oh i just got your joke.. funny..
Click to expand...
Click to collapse
Hey its not a joke you can use it.. Really:laugh: