Hi folks!
I have been looking for some info about our devices and if it's possible to flash an android custom rom on it, but no luck. However, there is a very similar device to the ZTE Open, It's the Alcatel One Touch Fire. It has the same hardware and also brings Firefox OS by default.
There is a custom rom in development for this device and I was just wondering if it's possible to flash it on the ZTE.
I can't post the link because I'm new, but it's easy to find it.
Thanks in advance.
Yes. Just flash in a ROM of ZTE roamer2 (V790)
ZTE Open has the same hardware spec as ZTE roamer2
hevangel said:
Yes. Just flash in a ROM of ZTE roamer2 (V790)
ZTE Open has the same hardware spec as ZTE roamer2
Click to expand...
Click to collapse
Have you tried flashing?
LinuxHolic said:
Have you tried flashing?
Click to expand...
Click to collapse
yes I have
hecatae said:
yes I have
Click to expand...
Click to collapse
Was it successful?
LinuxHolic said:
Was it successful?
Click to expand...
Click to collapse
LinuxHolic, what was the most recent version of Android you found for your ZTE Open?
I've not been successful in finding any ROMs. Do you think you can link here or private message me?
Thanks!
Saijin_Naib said:
LinuxHolic, what was the most recent version of Android you found for your ZTE Open?
I've not been successful in finding any ROMs. Do you think you can link here or private message me?
Thanks!
Click to expand...
Click to collapse
I didn't, that's why i'm asking him
LinuxHolic said:
I didn't, that's why i'm asking him
Click to expand...
Click to collapse
Right! Wow, sorry. That is what I get for reading when I'm not fully awake yet >_>
mistergr said:
Hi folks!
I have been looking for some info about our devices and if it's possible to flash an android custom rom on it, but no luck. However, there is a very similar device to the ZTE Open, It's the Alcatel One Touch Fire. It has the same hardware and also brings Firefox OS by default.
There is a custom rom in development for this device and I was just wondering if it's possible to flash it on the ZTE.
I can't post the link because I'm new, but it's easy to find it.
Thanks in advance.
Click to expand...
Click to collapse
Where do I find that image for ZTE Open? :fingers-crossed:
Found CM ROM
I found the CM rom via modaco site.. for roamer2.
yadi.sk/d/OADSzoWdKWSpf
I no longer have this phone, but go ahead and flash via CWM for android
bmn65 said:
I found the CM rom via modaco site.. for roamer2.
yadi.sk/d/OADSzoWdKWSpf
I no longer have this phone, but go ahead and flash via CWM for android
Click to expand...
Click to collapse
Have you flashed the Open with this ROM yourself?
I did some searching and I found these:
http://www.ztedevices.com/search.html?keyword=v790 you can get the ROM from the downloads page.
Also this one: http://www.modaco.com/topic/360962-zte-kis-iii-stock-roms/?p=2156977
I haven't tested any of these myself.
cairnarvon said:
Have you flashed the Open with this ROM yourself?
I did some searching and I found these:
http://www.ztedevices.com/search.html?keyword=v790 you can get the ROM from the downloads page.
Also this one: http://www.modaco.com/topic/360962-zte-kis-iii-stock-roms/?p=2156977
I haven't tested any of these myself.
Click to expand...
Click to collapse
I tried both and it does not work: (this also does not work: (
yadi.sk/d/OADSzoWdKWSpf
i have tried lots of Android Roms for ZTE KIS, Roamer2 etc.
all lead to bootloops.
resurrection is pretty easy though, just flash the experimental ZTE FFOS 1.2 and your good.
have not found a working ICS/JB Rom until now.
the phone is crap anyways, since you can't update higher than 1.3 (without any updates then) or stick to 1.1
there are no plans whatsoever from ZTE or Mozilla to remedy this.
Thought i could at least turn it into an emergency phone by flashing a usable Android on it, but it seems that's not going to work either.
linr76 said:
i have tried lots of Android Roms for ZTE KIS, Roamer2 etc.
all lead to bootloops.
resurrection is pretty easy though, just flash the experimental ZTE FFOS 1.2 and your good.
have not found a working ICS/JB Rom until now.
the phone is crap anyways, since you can't update higher than 1.3 (without any updates then) or stick to 1.1
there are no plans whatsoever from ZTE or Mozilla to remedy this.
Thought i could at least turn it into an emergency phone by flashing a usable Android on it, but it seems that's not going to work either.
Click to expand...
Click to collapse
Hey dude: http://firefoxosbuilds.org/
android
ROM is a zte V790 is the v2 ROM works on xperia zte open: D test
peñamaxi said:
ROM is a zte V790 is the v2 ROM works on xperia zte open: D test
Click to expand...
Click to collapse
No understanding.
peñamaxi said:
ROM is a zte V790 is the v2 ROM works on xperia zte open: D test
Click to expand...
Click to collapse
Can you just post a link to the rom?
elav said:
Hey dude: http://firefoxosbuilds.org/
Click to expand...
Click to collapse
"Dude" , whatever, 1.3 is not stable on ZTE Open - i tried. i have built a 1.3 myself (check on here) and the Browser crashes constantly.
there is no updated HW layer available for 1.3 and ZTE is not going to provide one.
Mozilla doesn't care either.
the only thing that happened is they gave you a coupon so you could buy a ZTE Open C cheaper.
burned once... no thanks.
Mozilla obviously is aware of the problem though and they do want to create a phone where they control everything.
that may change the game a bit.
also, all available FFOS devices are madly overpriced for the hardware specs.
linr76 said:
"Dude" , whatever, 1.3 is not stable on ZTE Open - i tried. i have built a 1.3 myself (check on here) and the Browser crashes constantly.
there is no updated HW layer available for 1.3 and ZTE is not going to provide one.
Mozilla doesn't care either.
the only thing that happened is they gave you a coupon so you could buy a ZTE Open C cheaper.
burned once... no thanks.
Mozilla obviously is aware of the problem though and they do want to create a phone where they control everything.
that may change the game a bit.
also, all available FFOS devices are madly overpriced for the hardware specs.
Click to expand...
Click to collapse
Actually any version of FirefoxOS is stable, especially after version 1.2. I found many ROMS, even 2.1, but always have a problem. That is why he was hoping to install some Android ROM on my ZTE Open.
linr76 said:
"Dude" , whatever, 1.3 is not stable on ZTE Open - i tried. i have built a 1.3 myself (check on here) and the Browser crashes constantly.
there is no updated HW layer available for 1.3 and ZTE is not going to provide one.
Mozilla doesn't care either.
the only thing that happened is they gave you a coupon so you could buy a ZTE Open C cheaper.
burned once... no thanks.
Mozilla obviously is aware of the problem though and they do want to create a phone where they control everything.
that may change the game a bit.
also, all available FFOS devices are madly overpriced for the hardware specs.
Click to expand...
Click to collapse
I can honestly say Open C, is worth what I paid for it, I dual boot the phone, run android from sdcard, run FF from phone, the specs aren't the best but worth the price I paid for it, the flame clearly is over priced, and I wont be getting that phone. Open C is most likely the only FF phone I will buy, I like the ideal I can build my own OS, and choose from several different OSes to use. Also I can simply reboot into android when I need to run a navigation app, or want to run an android app.
I have never used Open so don't know about it's problems, Open C is a nice phone, FF runs very well on it as does android, Specs aren't the best this isn't a power house phone, but a very usable phone.
Related
Hi there,I'm trying to port the SDK dump to my LG P500,which has the same specs like ZTE Blade.
After applying normal methods for making other phones' roms boot and a special patch found here it doesn't even give logcat,so bootloops in recovery.
After doing some research,I discovered that libs are built for armv7,which we don't have. But also Honeycomb SDK libs were built from armv7,but we got it working on both LG P500 and ZTE Blade.
So,any ideas? Just asking
I think honeycomb and below was build from armeabi (To run on the old simulator that was armv6 vfp (but the vfp wasn't used by google).
whereas ics was built for armeabi-v7a
That is certainly implied by the AVD manager anyway.
unrandomsam said:
I think honeycomb and below was build from armeabi (To run on the old simulator that was armv6 vfp (but the vfp wasn't used by google).
whereas ics was built for armeabi-v7a
That is certainly implied by the AVD manager anyway.
Click to expand...
Click to collapse
Thank you for replying
usually only kernel have ARM text and other also init.rc have kernel text if editing them to ARMv6 kernel text then it needs to work in ARMv6 device..
If not, then some files needs editing...
Android 4.0 ICS needs new EGL and hw files which needs to be ARMv6= ZTE Blade/other phone! all phones have own files to work fine!
If someone can edit Android 4.0 libGLES*.so, libEGL.so files and then egl folder files needs editing.. and then hw folder files for Screen, sensors, GPS, Audio, etc.
then them need right files to get work the audio, camera, WiFi...
WiFi files can work if you add older Android OS WiFi files: libhardware-legacy.so or what it is and then right WiFi files to /System/etc/
to get all to work it maybe takes many days and for me more than 9 months because I'm only 14! xD
SDK port is maybe not really good, it's better to port from other device ex: Samsung... then some files works without editing...
manumanfred the sdk was compiled for ARMv7, it's a different cpu, different machine code. It needs recompiling, to be able to do that you need the source code to compile it.
Without source code you're about as likely to get ICS running on your Blade as you are to get your PS3 running Windows 7.
When devices with ICS are available source code will be too, so porting it from another device would be a waste of time.
wbaw said:
manumanfred the sdk was compiled for ARMv7, it's a different cpu, different machine code. It needs recompiling, to be able to do that you need the source code to compile it.
Without source code you're about as likely to get ICS running on your Blade as you are to get your PS3 running Windows 7.
When devices with ICS are available source code will be too, so porting it from another device would be a waste of time.
Click to expand...
Click to collapse
its not hard to get ICS on zte blade as zte blade got a test verision of ICS
SWEATTAIMI said:
its not hard to get ICS on zte blade as zte blade got a test verision of ICS
Click to expand...
Click to collapse
Are you sharing it?
If not, it's still pretty hard.
http://forum.xda-developers.com/showthread.php?t=1312595
anyone please check this out maybe this can work
http://groups.google.com/group/android-building/msg/c0e01b4619a1455a?pli=1
Android ICS sourcecode is released! I belive that now in Cyanogenmod headquaters people hear red alert
uosiumen said:
http://groups.google.com/group/android-building/msg/c0e01b4619a1455a?pli=1
Android ICS sourcecode is released! I belive that now in Cyanogenmod headquaters people hear red alert
Click to expand...
Click to collapse
uosiumen said:
http://groups.google.com/group/android-building/msg/c0e01b4619a1455a?pli=1
Android ICS sourcecode is released! I belive that now in Cyanogenmod headquaters people hear red alert
Click to expand...
Click to collapse
Fail, u cant grab anything
Sent from my Transformer TF101 using xda premium
ICS on the Blade is booting!
But that's all it does
I used this ROM and replaced boot.img with CM N257. In the honeycomb port they fixed the flipped screen with patching libsurfaceflinger.so on offset 1AC90 but that does not work on ICS. Launcher FC's on first boot but does not after reboot.
Could you please upload that booting rom? I tried it and it won't even install. Even if nothing works, I would like to try several things on that to see if I can fix it, so if you upload it I would be very thankful
davidnintendo said:
Could you please upload that booting rom? I tried it and it won't even install. Even if nothing works, I would like to try several things on that to see if I can fix it, so if you upload it I would be very thankful
Click to expand...
Click to collapse
Take a working Rom for zte, and replace everything except build.prop and meta-inf folder
Sent from my LG-P500 using xda premium
FezzFest said:
ICS on the Blade is booting!
But that's all it does
I used this ROM and replaced boot.img with CM N257. In the honeycomb port they fixed the flipped screen with patching libsurfaceflinger.so on offset 1AC90 but that does not work on ICS. Launcher FC's on first boot but does not after reboot.
Click to expand...
Click to collapse
So correct me if im wrong, but you got ics booting on blade by using the g2 rom and boot.img from CM7 Latest nightly?
If so maybe start a new thread to track progress.
furrabbit.nh said:
So correct me if im wrong, but you got ics booting on blade by using the g2 rom and boot.img from CM7 Latest nightly?
If so maybe start a new thread to track progress.
Click to expand...
Click to collapse
LGP500 got bootloop on that, but thats our phone, so thats maybe work yes
SWEATTAIMI said:
LGP500 got bootloop on that, but thats our phone, so thats maybe work yes
Click to expand...
Click to collapse
I just tried it 10mins ago, it installs fine does not boot at all, no logcat output... Wonder if he/made any tweaks elsewhere.
I have a O1 somewhere might dig it out, and have a look
I got it booting! Screen is fliped, touchscreen doesn't seem to work at all and I couldn't test anything else because I can't press OK on the first tutorial screen, but it may be something to start with!
I'm uploading it right now, but I think it will take a while as my connection isn't working very well right now, but I'll post the link as soon as it's finished.
EDIT: OK. You'll have to be patient. Apparently, my 20 MB symmetric shared connection doesn't want to upload faster than 50 KB/s. It's always like this in the afternoon: too many people using it LOL. Hopefully it will be uploaded in 25 minutes or so.
davidnintendo said:
I got it booting! Screen is fliped, touchscreen doesn't seem to work at all and I couldn't test anything else because I can't press OK on the first tutorial screen, but it may be something to start with!
I'm uploading it right now, but I think it will take a while as my connection isn't working very well right now, but I'll post the link as soon as it's finished.
Click to expand...
Click to collapse
Thanks
Sent from my LG-P500 using xda premium
OK, fixed flipped screen & resolution. Thanks to smg22rus for the modified libsurfaceflinger.so.
Flashable ROM (for devs only!) can be found here
If you fix something, just post what you did to get it fixed, do not upload the whole ROM again.
That way, this thread stays clean & we have only one ICS ROM (not 10 different ones).
Hi everyone, I am new to the Thinkpad forums. I just bought a TPT and installed CM10 v.0.8.1. However, the tablet is having endless reboots as the Rom appears very unstable.
Can someone please upload the latest stock Rom from Lenovo? I don't have a backup rom. Thank you!
475719 said:
Hi everyone, I am new to the Thinkpad forums. I just bought a TPT and installed CM10 v.0.8.1. However, the tablet is having endless reboots as the Rom appears very unstable.
Can someone please upload the latest stock Rom from Lenovo? I don't have a backup rom. Thank you!
Click to expand...
Click to collapse
Which one? ROW? WE? US?
Unless you explicitly need the pen-only mode I recommend trying version 0.7 as it was much more stable than 0.8.1, at least in my experience.
kingOfTheLab said:
Unless you explicitly need the pen-only mode I recommend trying version 0.7 as it was much more stable than 0.8.1, at least in my experience.
Click to expand...
Click to collapse
in my case the 0.8.1 is very stable and runs very smooth... i was first on 0.8 which was a desaster... reboots every time and lost some productive data also :/ then i downgraded to 0.7 which was OK, but no pen only mode is very nasty when i try to write on the device e.g in university courses...
so now i'm on 0.8.1 and i have no problems...
maybe it helps if you clean all the caches and stuff?
I moved from 0.6.0 to 0.8.1 and find it MUCH more stable. Pen Only mode work quite well in the new 0.8.1 version too!
==
Michael
I did a few factory resets after installing the rom and I made sure to clean out the caches, etc via clockword recovery before installing the rom.
I am not sure why my TPT is rebooting unexpectedly so much.
I rooted the tablet after upgrading the stock rom to ICS, then got CW mod recovery. I am not sure which version TPT I have. I bought it in the US and it is 16gb if that helps.
Thanks!
475719 said:
I did a few factory resets after installing the rom and I made sure to clean out the caches, etc via clockword recovery before installing the rom.
I am not sure why my TPT is rebooting unexpectedly so much.
I rooted the tablet after upgrading the stock rom to ICS, then got CW mod recovery. I am not sure which version TPT I have. I bought it in the US and it is 16gb if that helps.
Thanks!
Click to expand...
Click to collapse
Check your Settings -> About this tablet.
emuandco said:
Check your Settings -> About this tablet.
Click to expand...
Click to collapse
What am I looking for? For model number, I see "ThinkpadTablet"
475719 said:
What am I looking for? For model number, I see "ThinkpadTablet"
Click to expand...
Click to collapse
no check for the software version. there is a US or we or row in it
emuandco said:
no check for the software version. there is a US or we or row in it
Click to expand...
Click to collapse
I'm sorry, but I don't see either US or we or row anywhere in the about tablet sections..
Me too
emuandco said:
no check for the software version. there is a US or we or row in it
Click to expand...
Click to collapse
I have been having issues with reboots as well. I have a US 32 gig and running 8.1. Not sure if it was because I had a micro SD with an adapter. I will try it without the micro SD.
475719 said:
I'm sorry, but I don't see either US or we or row anywhere in the about tablet sections..
Click to expand...
Click to collapse
if you have installed cm10 you won't find your Information in the 'about the tablet' section. Just install the app ' Android System Info' and look at system/buildinfo/fingerprints. At the end you will find something like 130_WE (i hope thats not an info about whats used by the cm10 build)/( WE = western europe). Besides: i have every now and then a sleep to death with 0.8.1. I havent had those with 0.8.0. I tried a lot and so far only one thing works - i turned of the light sensor. ( works at least since a few hours)
Hello there! Can someone help me out please?
I am using the ZTE Open European Standard and I am currently running Firefox OS 1.2 with CWM installed and I am wondering:
Since Firefox OS 1.3 was "released' recently will someone create a CWM installable build of Firefox OS 1.3 with the Firefox branding built to work on the ZTE Open please? I have looked around multiple times and I can't find a build anywhere that will work, and I do not have the knowledge required to compile my own.
KUPOinyourWINDOW said:
Hello there! Can someone help me out please?
I am using the ZTE Open European Standard and I am currently running Firefox OS 1.2 with CWM installed and I am wondering:
Since Firefox OS 1.3 was "released' recently could anybody create a CWM installable build of Firefox OS built to work on the ZTE Open please? I have looked around multiple times and I can't find a build anywhere that will work, and I do not have the knowledge required to compile my own.
P.S: I can't post a link because this is my first post on this site, but the 1.3 notes have officialy been released by Mozilla!
Click to expand...
Click to collapse
Did you know how to flash .img files through fastboot?
If yes, then i can give you FF OS 1.4
LinuxHolic said:
Did you know how to flash .img files through fastboot?
If yes, then i can give you FF OS 1.4
Click to expand...
Click to collapse
I do yes, and I've already tried the build you posted in this forum and it was very good! I was just having problems with getting data working on it otherwise I'd be using it now. I'm looking for a stable-ish user build of Firefox OS 1.3 at the moment because I love the look of it, but ZTE haven't updated since 1.1... I've emailed them twice and both times they haven't got back to me after saying they would
How good would it be if Mozilla could just release an update to everyone like they do with the web browser
KUPOinyourWINDOW said:
I do yes, and I've already tried the build you posted in this forum and it was very good! I was just having problems with getting data working on it otherwise I'd be using it now. I'm looking for a stable-ish user build of Firefox OS 1.3 at the moment because I love the look of it, but ZTE haven't updated since 1.1... I've emailed them twice and both times they haven't got back to me after saying they would
How good would it be if Mozilla could just release an update to everyone like they do with the web browser
Click to expand...
Click to collapse
The best i could come up with is this in case you haven't already tried this
I'm a bit of a noob when it comes to ftp servers... how do I install one of these builds to my phone? I downloaded the linux zip file (Tar), extracted it, found boot.img userdata.img and system.img, I flashed them to my phone and I'm just in a boot loop, I'm gonna revert back to 1.2 for now. Thank you I really appreciate it, I've tried like 4 different Firefox OS 1.3 though now and none of them have worked, I hope someone makes one soon. I would myself if I understood how to use the Terminal on Linux.
KUPOinyourWINDOW said:
I'm a bit of a noob when it comes to ftp servers... how do I install one of these builds to my phone? I downloaded the linux zip file (Tar), extracted it, found boot.img userdata.img and system.img, I flashed them to my phone and I'm just in a boot loop, I'm gonna revert back to 1.2 for now. Thank you I really appreciate it, I've tried like 4 different Firefox OS 1.3 though now and none of them have worked, I hope someone makes one soon. I would myself if I understood how to use the Terminal on Linux.
Click to expand...
Click to collapse
You have to be on V1.0.0B02 to flash custom builds of FF OS 1.3
And one more question: Did your ZTE Open hangs sometimes like not able to touch anything, unable to unlock screen etc?
Thanks
LinuxHolic said:
You have to be on V1.0.0B02 to flash custom builds of FF OS 1.3
And one more question: Did your ZTE Open hangs sometimes like not able to touch anything, unable to unlock screen etc?
Thanks
Click to expand...
Click to collapse
Thank you! I tried flashing from 1.0.0B02 and it worked, however every single build I've tried of 1.3 (from multiple sources) is unstable... Hmm, I got a reply from ZTE by the way saying that people have to request for an update to their "service provider" (whatever that means). That's such a sucky way of dong things, they should try their best to update until they are unable to in my opinion.
No not really, sometimes it does on the lock screen after pressing the power button but only on 1.0.0B02.
KUPOinyourWINDOW said:
No not really, sometimes it does on the lock screen after pressing the power button but only on 1.0.0B02.
Click to expand...
Click to collapse
Mine does! Continuously
I'm sick of this problem
Planning to do a drop test of my Phone
It's useless anyway
LinuxHolic said:
Mine does! Continuously
I'm sick of this problem
Planning to do a drop test of my Phone
It's useless anyway
Click to expand...
Click to collapse
Do a google search for Firefox OS 1.2 ZTE Open and click on the Mozilla Hacks website and flash the ZTE beta file, then you will have the default fastboot back on your phone. Then install the 1.1 ZIP update from ZTE... Then from the orange fastboot menu (ONLY AFTER INSTALLING 1.1) empty the cache and if your phone still hangs then do a drop test
Stock vs CM vs Vibe
We were supposed to get 5 different polished ROMs and, instead of that, we need to find our way to get a barely working phone.
Which is the most stable? Which is the most beautiful?
Those lucky enough to have received the phone, speak.
analyticbastard said:
Stock vs CM vs Vibe
We were supposed to get 5 different polished ROMs and, instead of that, we need to find our way to get a barely working phone.
Which is the most stable? Which is the most beautiful?
Those lucky enough to have received the phone, speak.
Click to expand...
Click to collapse
First of all, stop whining around in here like a little girl.
Stock ROM is working flawlessly for me since one week now.
tool_king said:
First of all, stop whining around in here like a little girl.
Stock ROM is working flawlessly for me since one week now.
Click to expand...
Click to collapse
What's your deal? Taking so much bull**** that you need to spread it?
Right now I'm using MDS rom it's working good. Everything is working. Supersu is updated and xposed is too. I'm still having some visual problems but nothing to worry about... My album art work wasn't working on stock but it is on this ROM. They just took stock and made it better... I do have a question. Can you send me cm12.1 that I can flash in CWM. I can't get the tool to work for me.
analyticbastard said:
What's your deal? Taking so much bull**** that you need to spread it?
Click to expand...
Click to collapse
look, the way you asked the question is how you got the first reponse. the same can be asked with you, whats your deal?
just calm down and let it go. keep it clean.
also what works for the other users might not work for you. so much hype around this phone and they didn't dissapoint-they market the item well and always sell half finished goods.
maybe the only good thing going for it is they "might" release source code which they should be doing any way so the community irons out the bugs.
they're trying a different approach with the P8000 saying we will give out the kernel source code blah blah blah developer friendly etc but i will wait and see. i tried for 3 weeks to get P7000 in flash sales. twice i had in my basket trying to check out and the price jumped from 159usd to 209usd by the time i checked out. i thought it was a sign, wait... wait until reviews and see if any shipping issues. i'm glad i did.
now to answer your question to the best of my ability...the stock rom is the only one that i know off that allows the fingerprint reader to work properly.
each of the other firmwares have their advantages and disadvantages.
XDA doesn't allow "best rom" threads but i understand where you are coming from.
are you looking in terms of stability or most working features?
look @ my signature, so far is the best rom, few bugs that needs to be iron out "other roms have not been updated recently"
@TopoX84
How did you get the Build 20150629? On the phone Wireless update it is Build 20150617 only?
Well, that's what it said on the ele flash app that they have on their website, if I check the settings it does states 20150617
Look at my attachments
TopoX84 said:
Well, that's what it said on the ele flash app that they have on their website, if I check the settings it does states 20150617
Click to expand...
Click to collapse
The 20150629 release doesn't seem to be an official one, just a modded version of the 20150617 release.
tool_king said:
The 20150629 release doesn't seem to be an official one, just a modded version of the 20150617 release.
Click to expand...
Click to collapse
That indeed seems to be true then what is it doing on a official Elephone flash app. =\
TopoX84 said:
That indeed seems to be true then what is it doing on a official Elephone flash app. =\
Click to expand...
Click to collapse
Good question indeed.
Very Good Rom
Android 5.0 Rom
Wipe all TWRP or CWM
Flash rom
Dev Avecilla:
http://www.movilesdualsim.com/tema/rom_moded_mdsteam_elephone_p7000_v2_by_avecilla.106432/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Update ; 11 /08/2015
Android 5.0 Version 20150629
Dev: tikilou
Root: Supersu
Thread: http://forum.xda-developers.com/ele...m-rom-p7000-based-ota-2015-t3157625?nocache=1
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Android 5.0 Version 20150629
Same Rom personal adapted the apps and stock Launcher
Root: Kinguser
Unzip Copy clockworkmod Folder to sdcard And Restore With CWM Recovery
Rom : https://mega.co.nz/#F!JIt3FZYA!Gg1Ayt3-lnKi3D2J1y2PHA
Flash Tool and Recovery : http://www.mediafire.com/download/rjtzq46tr6pn83n/P7000_Root_AIO.zip
77777777777777 said:
Best Stable and fasted Rom
Wipe all TWRP or CWM
Flash rom
Dev Avecilla:
http://www.movilesdualsim.com/tema/rom_moded_mdsteam_elephone_p7000_v2_by_avecilla.106432/
Click to expand...
Click to collapse
I agree with you. Avecilla's Rom is the best by now. Everything works smoothly
Enviado desde mi Elephone P7000 mediante Tapatalk
77777777777777 said:
Best Stable and fasted Rom
Wipe all TWRP or CWM
Flash rom
Dev Avecilla:
Click to expand...
Click to collapse
Is there a English option for this rom?
I am having bluetooth problem with my car, want to see if this rom fixes it....
itouchmypot said:
Is there a English option for this rom?
I am having bluetooth problem with my car, want to see if this rom fixes it....
Click to expand...
Click to collapse
Yes there is. Please test it and report back because I too am having problems with A2DP bluetooth audio and my car: only plays on the first try. If I close the app and open it again, it does not send any audio through.
A new version of the stock OS came in OTA. If you want to test it you have to reset to the stock rom and install the OTA update. It's way more fluid than the original, seriously for me it was day and night. I didn't get trouble with the photo and the new launcher is nice. It's still Android 5.0.
TopoX84 said:
Well, that's what it said on the ele flash app that they have on their website, if I check the settings it does states 20150617
Look at my attachments
Click to expand...
Click to collapse
Where can I find this Ele Flash App???
LadySarah said:
Where can I find this Ele Flash App???
Click to expand...
Click to collapse
http://forum.xda-developers.com/android/development/elephone-ele-easy-flash-tool-t3102780
tool_king said:
http://forum.xda-developers.com/android/development/elephone-ele-easy-flash-tool-t3102780
Click to expand...
Click to collapse
Thanks a lot...but there's no link
leomon32 said:
A new version of the stock OS came in OTA. If you want to test it you have to reset to the stock rom and install the OTA update. It's way more fluid than the original, seriously for me it was day and night. I didn't get trouble with the photo and the new launcher is nice. It's still Android 5.0.
Click to expand...
Click to collapse
Hi! I want to try this OTA, but when I try to download any system update I get the message "Your system was damaged, update is not possible". I am currently using the stock ROM! How can I install this new version that you have mentioned? Thanks a lot!
Was just wondering if it was possible and if so, what version of Cyanogenmod would I need?
First off, there is no more CyanogenMod. The CyanogenMod people started a new project called Lineage.
Now to answer your question. Yes, it is possible.
The Optimized LineageOS ROM should work on your device.
Pwnycorn said:
First off, there is no more CyanogenMod. The CyanogenMod people started a new project called Lineage.
Now to answer your question. Yes, it is possible.
The Optimized LineageOS ROM should work on your device.
Click to expand...
Click to collapse
Ok, thanks.
Is it easy to install? (my first Android phone and my first time installing a custom rom)
razerphynx said:
Ok, thanks.
Is it easy to install? (my first Android phone and my first time installing a custom rom)
Click to expand...
Click to collapse
The install process is a subjective matter.
For me it's easy since I've been doing these things for over 4 years.
For you it might seem complicated at first.
There are various guides and video tutorials that will show you how to do it. The process is usually the same for every phone and for every ROM.
Pwnycorn said:
The install process is a subjective matter.
For me it's easy since I've been doing these things for over 4 years.
For you it might seem complicated at first.
There are various guides and video tutorials that will show you how to do it. The process is usually the same for every phone and for every ROM.
Click to expand...
Click to collapse
Fair enough, I guess I'll have to educate myself on the matter before attmepting to install anything.
I do have a couple more questions;
1. Does Lineage improve performance and battery life like Cyanogenmod claims to do?
2. I think Lineage is based on a newer OS (Android 7.x.x) then my phone natively supports (Android 5.0.1), would that be an issue?
razerphynx said:
1. Does Lineage improve performance and battery life like Cyanogenmod claims to do?
Click to expand...
Click to collapse
Yes and yes.
razerphynx said:
2. I think Lineage is based on a newer OS (Android 7.x.x) then my phone natively supports (Android 5.0.1), would that be an issue?
Click to expand...
Click to collapse
Yes, although the LineageOS guys, the XDA community and devs (who work on it for free, during their spare time) manage to port the last version of Android to this device, you can expect some bugs, a degraded camera quality (because of proprietary blobs Samsung do not publish), and to loose some functionalities (smart pause, smart scroll).
However, the stock Android experience is worth the switch and you will learn a lot of things here, which is invaluable.
Try the unofficial LineageOS by side (original development forum).
Ok, thanks for the answers
Last question, would you be able to send me a download link to it? I couldn't find the right one for my phone.
razerphynx said:
Ok, thanks for the answers
Last question, would you be able to send me a download link to it? I couldn't find the right one for my phone.
Click to expand...
Click to collapse
I already told you, you need the Optimized Lineage ROM. It has your device listed as "supported".
It's in the GT-I9505 Original Development section. Impossible to miss, it's always around the top of the list.
And it is universal, meaning that there is no special version for your device.
Do note that the developer himself has a GT-I9505, and so do most of his test team members. So there's no guarantee that it will be a flawless experience.
Sorry, I must've missed that. Will report back once I get it installed
Thanks for all the help
Edit: On the download page there's two different versions
"Optimized-LineageOS-14.1-20170120-jflte-AROMA.zip"
and
" Optimized-LineageOS-14.1-20170120-jflte.zip"
Which one do I download?
YAY, it's all set-up and working now. Thank you all very much
Whenever I lock my phone, the screen stops working. I then have to restart my phone to get the screen working again. Any solutions?
razerphynx said:
Whenever I lock my phone, the screen stops working. I then have to restart my phone to get the screen working again. Any solutions?
Click to expand...
Click to collapse
Use the stock kernel. On the download page there should be an "extras" folder.
If you can't find it then download the aroma version and flash it. This one gives you some options during the install process.
Thanks, that fixed the issue.
Got another question,
How do I make my phone show up on my PC? Like it shows up as "GT-I9507" but when I open it, it's just empty. Before on stock Android it had 2 main folders, something like "Internal" or "System" and "SDCard" and they both had multiple subfolders.
razerphynx said:
Thanks, that fixed the issue.
Got another question,
How do I make my phone show up on my PC? Like it shows up as "GT-I9507" but when I open it, it's just empty. Before on stock Android it had 2 main folders, something like "Internal" or "System" and "SDCard" and they both had multiple subfolders.
Click to expand...
Click to collapse
That I do not know.
Should work straight away normally.
Try enabling/disabling USB debugging while the phone is connected.
Tried that, still nothing
razerphynx said:
Got another question,
How do I make my phone show up on my PC? Like it shows up as "GT-I9507" but when I open it, it's just empty. Before on stock Android it had 2 main folders, something like "Internal" or "System" and "SDCard" and they both had multiple subfolders.
Click to expand...
Click to collapse
Select notification "USB charging this device" or anything similar, select MTP. It'll auto reconnect and it should work.
Sent from my Redmi 3 using XDA Labs
Oh, yeah. Try what he said.
I haven't connected my phone to a PC in years, so I wouldn't know what to do.