hi , i have got galaxy s4 i9505 , i rooted the phone with this
TUTORIAL
( Step 1: Download both CF-Auto-Root Android 4.4.2 Package and ODIN3, and extract the files to the computer.
Step 2: Power off the handset and put it in Download mode by pressing and holding down the Volume Down, Home and Power buttons together. After a warning screen appears, press the Volume Up button to enter Download mode.
Step 3: Run Odin3 v3.09.exe as an Administrator while the phone is Download mode, and connect the Galaxy S4 to the PC via USB cable. If connected successfully, a message showing “Added!!” will appear in Odin’s message box.
Step 4: Now, click on the AP button, and select the CF-Auto-Root file that was extracted in Step 1.
Step 5: In Odin, check the “Auto Reboot” and “F. Reset Time” options.
Step 6: Click on the Start button in Odin to begin the flashing process.
Step 7: Once the process is complete, the Galaxy S4 will restart and a PASS message with green background will appear in the left-most box at the top of Odin.
You can now unplug the USB cable to disconnect the handset from the PC.
AFTER THAT
i downloaded 3 different roms and try to installed ( in recovery mode , so volume up + menu + power button ) and wipe data cache and then i chose one of the roms and it starts and after few seconds it says ""failed to verify whole file signature , signature verification failder ""
so how to fix this problem ?
can you give me TUTORIAL for the whole proces ?
THANKS
If your phone do not start so first you need to reflash again with stock rom and again root your mobile after that install cwm or other recovery. Due to cwm or other u can install your roms...
Sent from my GT-I9500 using XDA Premium 4 mobile app
Related
RECOVERY GUIDE
Flash signed recovery zip - Easiest way
1. The most common way is to simply flash Phil3759's Enhanced ClockWorkMod Touch.
2. Download the .zip file and copy it to your external sdcard
3. Then, reboot into the stock recovery (power off the phone and turn it on with home button and volume+ button pressed)
4. Choose "install zip from external storage" and select the already mentioned zip
5. Reboot. This should be enough!!
This is the easiest method, thus the followings are meant to be attempted only if you had problems with the previous
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Odin - If you have a computer available
1. If you have any errors try going back to the Phil Download Home and instead download the latest i9100 .tar.md5 file
2. Download Odin 1.85 and unzip the archive
3. Open the executable and add the previously downloaded .md5 into the PDA field
4. Put the phone into Download mode (power off the phone and turn it on with home button and volume- button pressed)
5. Connect it to the computer and wait till drivers installation is finished
6. Start flashing
7. (optional) If you want to remove the yellow triangle, check Chainfire's Triangle Away
Mobile Odin - When you have nothing but errors
0. You'll need Chainfire's Mobile Odin. Show him your gratitude and buy the app if you want! :laugh:
1. Root your phone. If that doesn't work, try "Xperia Root by cubeundcube"
2. Download Dorimanx Kernel (one of the .md5 packages)
3. Open Mobile Odin and grant it root permissions
4. "Open file" and select the .md5 file
5. Follow instructions and go!
Reserved.
I would like to point out i made yet another guide for gs2, because yesterday I went to "unlock" my mum's i9100 and I had a very time
If somebody wrote a more comprehensive guide, sorry i miss it
Note:
1. Install necessary USB Drivers for Galaxy S5 on the computer.
2. USB Debugging Mode should be enabled on the phone by navigating to Settings >> Developer Options.
3. Back up your important data using Helium app
4. At least 80 percent battery charge
Downloads Required
1. Download the appropriate CF-Auto-Root tool for your device (based on region or carrier) from the following links:
SM-G900F (International Qualcomm):http://download.chainfire.eu/397/CF-Root/CF-Auto-Root/CF-Auto-Root-klte-kltexx-smg900f.zip
SM-G900H (International Exynos):http://download.chainfire.eu/402/CF-Root/CF-Auto-Root/CF-Auto-Root-k3g-k3gxx-smg900h.zip
SM-G900I (Oceania):http://download.chainfire.eu/409/CF-Root/CF-Auto-Root/CF-Auto-Root-klte-kltedv-smg900i.zip
SM-G900L (Korea):http://download.chainfire.eu/412/CF-Root/CF-Auto-Root/CF-Auto-Root-kltelgt-kltelgt-smg900l.zip
SM-G900M (Middle and South America):http://download.chainfire.eu/403/CF-Root1/CF-Auto-Root-klte-klteub-smg900m.zip
SM-G900R4 (US Cellular):http://download.chainfire.eu/404/CF-Root1/CF-Auto-Root-klteusc-klteusc-smg900r4.zip
SM-G900T (T-Mobile US):http://download.chainfire.eu/407/CF-Root1/CF-Auto-Root-kltetmo-kltetmo-smg900t.zip
SM-G900P (Sprint): http://download.chainfire.eu/408/CF-Root/CF-Auto-Root/CF-Auto-Root-kltespr-kltespr-smg900p.zip
SM-G900T1 (Metro PCS): http://download.chainfire.eu/405/CF-Root1/CF-Auto-Root-kltemetropcs-kltemetropcs-smg900t1.zip
SM-G900W8 (Canada): http://download.chainfire.eu/406/CF-Root1/CF-Auto-Root-kltecan-kltevl-smg900w8.zip
2. Download Odin v3.09
Steps to Root Galaxy S5 Running on Android 4.4.2 KitKat Firmware
Step 1: Extract CF-Auto-Root and Odin 3.09 zip files using WinZip or any other extracting tool.
Step 2: Turn off the Galaxy S5 and boot it into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Then tap Volume Up button to enter Download Mode.
Step 3: Launch Odin on computer as an Administrator.
Step 4: Connect the Galaxy S5 to computer via USB cable while it is still in Download Mode. Wait until Odin recognises the device and once the device is connected successfully, the ID: COM box will turn light blue with the COM port number. Furthermore, an Added message appears on screen if the device is successfully connected.
Step 5: In Odin, click the AP button and choose CF-Auto-Root .tar.md5 file.
Step 6: Ensure Auto Reboot and F. Reset Time options are selected in Odin. But, the Re-Partition option must be unchecked.
Step 7: Verify the previous step and click Start in Odin. The root installation process will now begin.
Step 8: Once the root installation is done, your phone will reboot and soon a PASS message with green background appears in the left-most box at the very top of Odin. You can now disconnect the USB cable to remove the phone from computer
Note
Many Samsung devices include a flash counter that keeps track of how many times you have flashed custom firmware to your device. Triangle Away app helps to reset the flash counter on your device to zero.
How to Root Samsung Galaxy J7 (SM-J700H) Exynos 3G Model & TWRP.
Please Follow step by step guides.....
***Things You Need:
Windows PC
USB Cable
80% Battery Charge available
***Please do a backup of your important files, cause if you do anything wrong or softbrick your mobile***
• 1st Download the rar file from Link (Delete Spaces) and extract the folder. Link: https: //mega. nz/#!VFgCGDpS!4fm1uvNRORAkrkQJ0KdaoiRCVS_sCaw3TVYJjHzinAU
• Then into the folder Install Samsung USB drivers in your PC.
• Now go to your mobile Settings>About Device>Build Number (Tap Continuously 7 times to enable Developer Options)
• Then connect your Mobile to your PC via USB cable and copy the "UPDATE-SuperSU-v2.46.zip" file to the internal storage of the phone. Don't extract this file.
• Enable USB Debugging on your device. (Settings > Developer Options > USB Debugging)
• You need to enable OEM bootloader unlock in your developer options to install the TWRP recovery! Go to > ‘Settings’ > ‘Developer Options’ > ‘Turn on OEM unlock’ on.
***Install TWRP Recovery:
1. Open Odin_v3.09 folder on your PC and double click "Odin3 v3.09.exe" file. This will open an Odin window.
2. Boot your Galaxy J7 into Download mode: Turn off your mobile. Press (Volume Down) + (Home) + (Power) button together and hold them until you see Samsung logo. Release them once you encounter a warning screen on your device. Press Volume Up to acknowledge the warning. This takes you to download mode.
3. Connect your Mobile device to the PC using an USB cable and make sure your device is detected. An “Added!! message will appear in Odin’s message box.
4. Now Set up Odin as follows:
Check the AP box add the "twrp-2.8.7.0-j7elte.tar" file. (Do not extract it)
Check Auto Reboot and F.Reset Time options.
See Odin Setup Image Here (Delete Spaces). Link: https: //mega. nz/#!tZ5wkaBa!Ul8cnigZIIOSdPYiIGJvtIzfdf58h_4hWFDbBh1uLb4
5. Then click START button on Odin to begin the installation process.
6. After your device is rebooted you will see “PASS!” message in Odin and quickly remove your battery whenever you see Samsung logo on Startup.
***Rooting Your Device:
• Now put your mobile battery back and press (Volume Up) + (Home) + (Power) buttons together until you see Samsung logo. It will boot your mobile into TWRP recovery mode.
• Select Install Zip from TWRP.
• Now locate to Internal or External storage where you copied the "UPDATE-SuperSU-v2.46.zip" files before and select this file to Install. Slide to unlock, it will install the "UPDATE-SuperSU-v2.46.zip" into your mobile.
• Now reboot your Mobile.
After some minutes your phone will reboot. You will find your device rooted and SuperSU App installed.
You have successfully rooted Samsung Galaxy J7 with TWRP recovery installed.
To check your device rooted or not? You can test it by an app called "Root Checker". You can download this from Play Store.
Hit Thanks Button Please! :good:
What will happen if you don't pull off the battery? Will it softbrick the phone?
Bipinpdl said:
What will happen if you don't pull off the battery? Will it softbrick the phone?
Click to expand...
Click to collapse
It should work fine without removing battery but few phones can't go to TWRP mode. And this tricks wored for them, that's it! Hope you understand. Let me know if it worked for u and Hit the thanks button for me!
Hello,can someone tell me step by step how to downgrade from 6.0.1 to 5.1.1 stock firmware ITV?
bubugaga said:
Hello,can someone tell me step by step how to downgrade from 6.0.1 to 5.1.1 stock firmware ITV?
Click to expand...
Click to collapse
☆Why you want to downgrade your firmware? Nougat is on the way for S6edge plus..Without any proper reason kindly don't try to downgrade your firmware, it will might cause efs corruption for your device as lower modems failed to read newer efs partitions..Still you want to downgrade then follow guide on your own risk with backing up your current stock firmware.
●BACKUP YOUR DATA STORED ON INTERNAL STORAGE AS YOU NEED TO DO FULL WIPE BEFORE DOWNGRADING FIRMWARE
●GUIDE-
1)Download latest odin and samsung usb drivers for your device.
Extract both odin and usb drivers to specific folders(Odin to Odin and Usb drivers to Usb drivers Folder respectively)
Install usb drivers on your pc.
2)Download latest 5.1.1 software for your phone from sammobile.com/firmware section
https://www.sammobile.com/firmwares/download/58989/G928FXXU2AOJ5_G928FITV2AOJ1_ITV/
Check the above link and see you model is SM-G928F and Country is ITALY Csc code-ITV.
If i am not right then download right firmware for your device and country
(Extract firmware file in firmware folder respectively , you will get tar.md5 filein that folder)
3)Press volume up+power+home button simultaneously until you see samsung galaxy s6edge+ logo, release keys.
Your now in stock recovery.
From there wipe data/factory reset, wipe cache,wipe internal storage make full wipe.
Reboot device after wipe and do initial setup.
4)Go to settings>About device>Software info>press build no for 7 times until developers options enabled
6)Go to setting>developers options>enable oem unlocking and usb debugging
7)Now press volume down+power +home button simultaneously.
You are now in download mode.
Press volume up to continue.
8)Now on pc run downloaded odin.exe as device administrator
9)Connect your device using original samsung usb cable through main usb port
10)Let pc to install usb drivers for your device, after installing drivers you will find your device is added in Odin "COM:"
11)Now click AP in odin, go to tar.md5 you previously extracted in firmware folder and add it to AP
It will take some time to b ready
12)From odin options>check auto reset and reboot options selected*Dont select auto repatriation option
13)Hit run in Odin..Your software will start to flash..Wait until flashing complete..Odin will give PASS message after completion And your device will be reboot itself
14)Wait for some time, You will get initial setup wizzard
15)In case you stuck at samsung logo for long time, Press volume down+Power button to switch off device..When screen turns off, immediately press Volume up+power +home buttons simultaneously to get into stock recovery..From there wipe data/factory..After reset complete,reboot your device.
●DO IT AT YOUR OWN RISK!! NO ONE INCLUDING ME OR ANY XDA MEMBER WILL BE RESPONSIBLE FOR ANY DAMAGE OR BRICK TO YOUR DEVICE
Followed all steps to root phone.
But odin displays Fail (Auth) error. Not sure how to root my phone
Hello. I did root my phone few days ago using Odin, I can help you.
What do you need:
SuperSU ZIP File (For your Android version, to check in Settings -> About device) and copy it to phone memory
TWRP Recovery MD5 File (for Odin) (for your phone model, check in Settings -> About device)
Now steps:
1. Enable OEM Unlock in Developer Options (If not unlocked, Settings -> About device -> Tap "Build Number" 7 times)
2. Open Odin and select AP (maybe PDA)
3. Find your TWRP File and select it
4. Turn off your phone, go to Download Mode (Volume Down, Home and Power buttons), click Volume Up (once)
5. Connect your device to your PC (In Download Mode you need to see Odin Mode!)
6. If in Odin you have seen "Added!" click Start
7. If Odin will fail, try again (I needed to)
8. If you have already flashed TWRP, go to it (Volume Up, Home and Power buttons)
9. Go to Wipe option and swipe to do default wipe.
10. Now click Install, select your SuperSU file.
11. Swipe to do it (Zip authentication disabled!!!!)
12. After it's done, reboot your phone again to your OS.
13. Enjoy your new root!
Optional Step: download Root Checker from Google Play and check your root.
I hope I did help you.