[GUIDE] Rooting your LAVA IRIS 504q without pc AND updating CWM Recovery
This Guide will help you to root your device without pc.. and updating CWM recovery...
Simplest way to root your device.
Tools required/Keep these applications ready:-
Framaroot
MobileUncle tools
recovery.img
Download from attachments
Procedure:-
1)Rooting:-
Open Framaroot Application
in dropdown by default its 'install SuperSu'......if not select 'install superSu' in the dropdown...
Below Select Boromir... Done..REBOOT Your device...
After clicking boromir ..it should say "supersu binaries installed.." Check 1st Screenshot in attached thumbnail... if it dsnt try again..
and once the message comes reboot....
Congrats You have your rooted device now..!! one step away from enjoying Custom Roms..!!
2) Updating Recovery
Download the recovery.img file from the attachments below.
Place the recovery.img file in your sd card
Open MobileUncleTools Application
Grant superuser permission
Click on Recovery Update
it will show you recovery.img file you placed in sd card
Select that recovery(see the 2nd screenshot in attachment..shld look like as in ss)
click ok..
It will ask to reboot into recovery mode... click yes to verify the update..from their you can reboot system again..
3) Further if you want to install any custom ROM:
Place the ROM file that is zip file in sd cArd
Switch of the phone
Hold the power button + Volume up button together(hold vol button till the boot logo appears)
once into recovery..
Common/IMPORTANT steps for installing any ROM:-
wipe data
wipe cache
mounts and storage--> format system
Advanced--->Wipe dalvik Cache
select Install zip from sdcard --> install from External sd card...
Navigate to zip file.. install...Enjoy your ROM..
CAUTION/WARNINGS:
Once you root your device..you VOID YOUR WARRANTY ...am NOT RESPONSIBLE for anything
Always have BACKUP before installing any ROM....just in case any problem occurs while flashing rom
If You BRICK your phone during any of these process... AM NOT RESPONSIBLE..
FLASH at Your OWN RISK
Thank You..... !!! Comment if any Doubts...!!
HIT THANKS IF TUTORIAL HELPED..... :good:
Join This FB Group :- https://www.facebook.com/groups/674412272632734/
I have Iris 356 and i'm thinking to root phone much easier with hope it works.
Download update*SuperSU*.zip and place in sdcard
Using ADB boot to recovery (Since It's not possible through Power+VolDown)
Flash .zip from sdcard
And That's it
Do you think my method would work??
arvindgr said:
I have Iris 356 and i'm thinking to root phone much easier with hope it works.
Download update*SuperSU*.zip and place in sdcard
Using ADB boot to recovery (Since It's not possible through Power+VolDown)
Flash .zip from sdcard
And That's it
Do you think my method would work??
Click to expand...
Click to collapse
Depends su.zip shld have rooting script too lol otherwise it will just install su apk...!! it shld wrk...... (Y)
Sent from my lava iris 504q using tapatalk
problem in moving pp to sd card
hi
i have rooted my phone and follow all the process as mentioned. thanks to u :good:
but even after rooted i am not been able to move many applications to my sd card. i already have app2sd .
face book , whts app are the two major app which are eating my space. please tell me how to move the app.
thanks in advnce
How to flash completely custom recovery no PC (cwm,twrp.etc)
---------- Post added at 10:57 AM ---------- Previous post was at 10:57 AM ----------
Kokochitnaywinaung said:
How to flash completely custom recovery no PC (cwm,twrp.etc)
Click to expand...
Click to collapse
thx mate you made my day, no other thread share recovery, mobile uncle tools and framaroot apks, without any hellish file host.
Related
Hi,for some reasons I can't get Odin to work properly.I have B5510JPKJ4 firmware and I want to install it into my samsung Galaxy Y Pro gt-b5510.
Is there any solution to convert this firmaware into .zip or something else to make it installable through SD Card?
The firmware got these 3 files:
DefaultCalDataWithBoot_B5510JXKJ1_REV03.tar.md5
FOTA_AP_B5510JPKJ4.tgz
FOTA_CSC_B5510OJPKJ1.tgz
Or can I simply add .tgz files into SD Card and install them through recovery mode?
help plsss
rocky450 said:
Hi,for some reasons I can't get Odin to work properly.I have B5510JPKJ4 firmware and I want to install it into my samsung Galaxy Y Pro gt-b5510.
Is there any solution to convert this firmaware into .zip or something else to make it installable through SD Card?
The firmware got these 3 files:
DefaultCalDataWithBoot_B5510JXKJ1_REV03.tar.md5
FOTA_AP_B5510JPKJ4.tgz
FOTA_CSC_B5510OJPKJ1.tgz
Or can I simply add .tgz files into SD Card and install them through recovery mode?
help plsss
Click to expand...
Click to collapse
http://www.mediafire.com/?x8hpnd1mxdv4j44
use ^ this link
then boot into cwm recovery
then given link is a recovery of DDLE1
restore it
u r done
stock firmware with out odin
HEY, PRESS THANKS I HELPED YOU
Many thanks for your help,I didn't find this file on the net.
One more question, Is this update deletes all the files (including SD card)? Also,do I need to make a backup using apps like Titanium backup?.
waiting your reply
no it cant delete the sd file
your data in phone- like apps,contact
all will erase
but nothing with sd card
there is an error during installation,it tells me cannot open package.zip!
any solution plz? Does it require enough space in SD card because I have only 40MB of free space!
Don't worry my phone is not bricked yet
rocky450 said:
there is an error during installation,it tells me cannot open package.zip!
any solution plz? Does it require enough space in SD card because I have only 40MB of free space!
Don't worry my phone is not bricked yet
Click to expand...
Click to collapse
Did you used stock recovery or cwm you have to use cwm
Sent from my GT-S5360 using XDA
I have rom manager then I press reboot phone in cwm but it keeps running in stock recovery!
use cmw recovery and first clear your data
atleat your device having 120 mb free space or more......
cwm
use attachment
flash it in stock recovery
DONT SHY, JUST PRESS THANKS
CWM Restore!
rocky450 said:
there is an error during installation,it tells me cannot open package.zip!
any solution plz? Does it require enough space in SD card because I have only 40MB of free space!
Don't worry my phone is not bricked yet
Click to expand...
Click to collapse
Save CWM by skin1980 in the root of sdcard(/sdcard)
Save the DDLE1 backup u got here nd save it in sdcard.. the backup will be saved in a folder which has a path similar to /sdcard/clockworkmod/backup/2012-03-09.17.40.45/
Then Restart into stock recovery
Install the zip(Skin1980 zip)
CWM will open up(Yellow fonts)..
Select backup&restore>restore
If u hv saved in correct location as I stated.. U'll get that in the list..
Select it.. pick yes restore...
It'll take hardly 5-10mins
Enjoy!!
NeelDroid said:
Save CWM by skin1980 in the root of sdcard(/sdcard)
Save the DDLE1 backup u got here nd save it in sdcard.. the backup will be saved in a folder which has a path similar to /sdcard/clockworkmod/backup/2012-03-09.17.40.45/
Then Restart into stock recovery
Install the zip(Skin1980 zip)
CWM will open up(Yellow fonts)..
Select backup&restore>restore
If u hv saved in correct location as I stated.. U'll get that in the list..
Select it.. pick yes restore...
It'll take hardly 5-10mins
Enjoy!!
Click to expand...
Click to collapse
Followed these steps but it tells me "MD5 Mismatch!"
Ok installed the rom and everything is working fine (widgets,status bar,apps etc...) except my keyboard!! It is a firmware for samsung s5360 not a firmware for my Galaxy Y Pro b5510!
is there a specific rom for this phone?
thx for the help
helpppp
dont pass of Restoring data...
CAn i install firware from sd card if phone is bricked
hello!! sir my phone is bricked...can I install firmware with sd card I have firware with scatterd file ...pls help me sir...
arpitraj456 said:
hello!! sir my phone is bricked...can I install firmware with sd card I have firware with scatterd file ...pls help me sir...
Click to expand...
Click to collapse
if you can get into recovery mode you can either
1. restore a nandroid backup
2. format system data cache - mount system data cache - flash a custom rom zip
if you cant get into recovery mode then go into download mode and flash stock rom via odin (requires a pc)
phone is bricked !!Lol!
Sir..I have xolo a600 .I am trying to install chainfire 3d and apps need to reboot and after reboot my mobile can open. just hanging in logo (just like xolo) :crying: and I install the firware with sp flash tool but my mobile `s board is not working properly when I am trying to install the driver of xolo .my mobile`S PORT IS not shown....pls help me sir..Can You tell me which way I can install my firware with sd card...pls tell me..I
have go in recovery mode and click on apply update from sd card but ,my sd card not showing..and phone`s memory is showing...pls help me sir how can I install firware.....:silly: I kindly requested you sir...
arpitraj456 said:
Sir..I have xolo a600 .I am trying to install chainfire 3d and apps need to reboot and after reboot my mobile can open. just hanging in logo (just like xolo) :crying: and I install the firware with sp flash tool but my mobile `s board is not working properly when I am trying to install the driver of xolo .my mobile`S PORT IS not shown....pls help me sir..Can You tell me which way I can install my firware with sd card...pls tell me..I
have go in recovery mode and click on apply update from sd card but ,my sd card not showing..and phone`s memory is showing...pls help me sir how can I install firware.....:silly: I kindly requested you sir...
Click to expand...
Click to collapse
cant help you because this forum is for the galaxy y gt-s5360
I have no knowledge of your device - Goto your own phones forum if it has one or the xda question and answer section for non specific phones if it doesnt
my phone is stop during installation and it says that "error mounting data ! " what should I do ? please I need your help
NosHIRoU07 said:
my phone is stop during installation and it says that "error mounting data ! " what should I do ? please I need your help
Click to expand...
Click to collapse
What are you trying to install
Can you manually mount data in CWM?
Did you format data in CWM and then try to mount it?
Are you using the correct cwm?
Is it formatted in the correct file system for your kernel? Rfs/ext
please help me to upgrade firmware of lenovo tab a1000g from sd card
please help me to upgrade firmware of lenovo tab a1000g from sd card
Hello,
At first my phone wouldnt boot up and made restarts so i tried installing roms with odin and now it wont even show samsung boot logo anymore.
Only volume down + home + power buttons work ... i dont know the meanings of bricking and rooting so i need a step by step tutorial for newbies.
I have searched the google and i havent found anything useful so i thought if i cant find any help here i have to take my phone to repair service but i think it would cost more than phone is worth
eekam said:
Hello,
At first my phone wouldnt boot up and made restarts so i tried installing roms with odin and now it wont even show samsung boot logo anymore.
Only volume down + home + power buttons work ... i dont know the meanings of bricking and rooting so i need a step by step tutorial for newbies.
I have searched the google and i havent found anything useful so i thought if i cant find any help here i have to take my phone to repair service but i think it would cost more than phone is worth
Click to expand...
Click to collapse
Flash a stock rom...! Search on youtube on how to flash a stock rom.
Rom: Hyperion 8
Kernel: Savie's kernel
Theme: My own modification
odin fails the process
read here bro it helps solve your problem...
http://forum.xda-developers.com/showthread.php?t=1465800
This may work if odin doesn't
Take yours sd card out your phone and put it in your pc (you will need a micro sd adapter and a pc with sd card slot or a usb sd card reader)
Download any custom rom from developers section - let's say evo-x3
Download hells fusion #50 kernel from dev section
Place both zips on sd card either via the card reader or another method if you can
Put sd card back in phone
Boot in Cwm (you will need a temporary Cwm if you don't have one)
Do a full data wipe reset (wipe data system and cache)
Mount everything (data system & cache)
Install zip from sd & choose hells fusion #50
Choose option 1 install stock rom
Restart back into recovery
Install zip & flash temporary cwm
In Cwm mount system
Install zip & select hells fusion
Choose option 2 install hells fusion
Restart back into Cwm (you will have permanent Cwm now)
Mount system
Install zip from sd & select evo-x3
Restart
With some luck everything should boot after a while (evo-x3 has no boot animation so wait at least 6mins on first boot)
eekam said:
odin fails the process
Click to expand...
Click to collapse
How do you mean fails?
Sent from my S100 using xda premium
---------- Post added at 11:33 PM ---------- Previous post was at 11:31 PM ----------
marcussmith2626 said:
This may work if odin doesn't
Take yours sd card out your phone and put it in your pc (you will need a micro sd adapter and a pc with sd card slot or a usb sd card reader)
Download any custom rom from developers section - let's say evo-x3
Download hells fusion #50 kernel from dev section
Place both zips on sd card either via the card reader or another method if you can
Put sd card back in phone
Boot in Cwm (you will need a temporary Cwm if you don't have one)
Do a full data wipe reset (wipe data system and cache)
Mount everything (data system & cache)
Install zip from sd & choose hells fusion #50
Choose option 1 install stock rom
Restart back into recovery
Install zip & flash temporary cwm
In Cwm mount system
Install zip & select hells fusion
Choose option 2 install hells fusion
Restart back into Cwm (you will have permanent Cwm now)
Mount system
Install zip from sd & select evo-x3
Restart
With some luck everything should boot after a while (evo-x3 has no boot animation so wait at least 6mins on first boot)
Click to expand...
Click to collapse
Cwm won't work for him only download mode.
Sent from my S100 using xda premium
Flash stock rom it will boot
Sent from my GT-S5360 using Tapatalk 2
stock rom always does the work....
Project Young said:
How do you mean fails?
Sent from my S100 using xda premium
---------- Post added at 11:33 PM ---------- Previous post was at 11:31 PM ----------
Cwm won't work for him only download mode.
Sent from my S100 using xda premium
Click to expand...
Click to collapse
Cwm will work if you have a temporary cwm
If you can get into stock recovery mode you can get cwm
Or if you have a kernel with a permanent Cwm you can go straight into it
Push volume up and home button - hold these buttons & push & hold power button
Phone will start in recovery mode either stock recovery or cwm depending on kernel
If it doesn't then it's a hard brick & you will need to search on how to resolve hard brick
First of all try not to move the cable while flashing....
Second if odin fails consistently it is possible either odin or the packages have gone currupt ...download a new one
flash pda first if work good flash all three pda modem and csc....
try and report....
Sent from my GT-S5360 using xda app-developers app
MicroSD Can't Mount
Help me. i'm try to root my device. but i can't apply update from sd card. it's said in recovery mode: "can't mount". What should i do?
MaulanaSM said:
Help me. i'm try to root my device. but i can't apply update from sd card. it's said in recovery mode: "can't mount". What should i do?
Click to expand...
Click to collapse
format your sd card correctly
copy sd card contents to pc
boot phone normally
goto phone settings
storage
unmount sd card
format sd card
you can now mount the sd card in recovery
marcussmith2626 said:
format your sd card correctly
copy sd card contents to pc
boot phone normally
goto phone settings
storage
unmount sd card
format sd card
you can now mount the sd card in recovery
Click to expand...
Click to collapse
thank you so much
please help friends...
i tried to root galaxy y by flashing update.zip in recovery mode...it shows "update from sd card installed successfully." but on booting i cant find the super user app ....i also used root checker...it shows root access is denied...please help friends...
Ashwin77 said:
please help friends...
i tried to root galaxy y by flashing update.zip in recovery mode...it shows "update from sd card installed successfully." but on booting i cant find the super user app ....i also used root checker...it shows root access is denied...please help friends...
Click to expand...
Click to collapse
Wipe data n restore ur phone then try this below zip by flashing... http://d-h.st/qxn
Try flashing this multiroot intaller mirrored by me
Installation:
1.go to recovery mode and flash cwm.zip
2.go to mount and storage
3.mount all
3.go to install zip from sd card
4.choose the multirootinstaller
5.follow the instruction
6.reboot
7.done
Download link:
Multirootinstaler.zip
- http://www.mediafire.com/?we75ab9vfa3khr6
CWM.zip
- http://www.mediafire.com/?h3yezfoclx185px
Hit thanks if i helped!
This is the clockworkmod recovery ported from nexus 5. I haven't tested everything yet but things do seem to work. It uses the stock kernel.
Instructions to flash:
(Make sure you are rooted prior to this.)
1. Install Recovery Tools from above link.
2. You will get a prompt to backup your stock recovery. DO IT.
3. Download recovery file from here and copy it to your phone.
4.Select 'Flash Recovery' option.
5. Select 'from storage' and select it from your phone.
6. flash it.
You're done!
LINK TO STOCK GiONEE RECOVERY: https://www.mediafire.com/?uwlp6ohz2hmunk1
OTHER VERSIONS
6.0.4.4 : http://d-h.st/dXx
NOTE: The sdcard won't mount on this version. But you can use sideload and USB-OTG.
mine!
Great job
Thanks Ravi bhai love your work and effort man
Thanks a lot
hope to see more dev from ur side
Hi i have a question my phone is stuck at bootloop and i dont know how to install cwm. how am i supposed to instal cwm and flash original firmware ?
How to backup my android with the recovery ?
hello, I managed to install the recovery but I can not seem to make a backup of the system because the laptop does not have SD card port.
Thanks for help me )
Help
DeceptiPrime said:
Hi i have a question my phone is stuck at bootloop and i dont know how to install cwm. how am i supposed to instal cwm and flash original firmware ?
Click to expand...
Click to collapse
Did you fix the bootloop problem? I too got stuck can you help me?
Gione f103
Guys i tried to flash the cwm file after unlocking bootloader, but still when i reboot phone it boots in cm stock recovery??????
Plz provide the stepsand link
Use the "all in one" toolkit provided in android development section. As u said u have unlocked bootloader, first choose "root" option it will send a root.zip will to your yureka....i cant remember wheter it send to internal memory or ext sd but make sure its on ext sd. After that choose "flash CWM" option. It will take 9-10 sec and your will boot in CWM. Do not restart now. First flash that root.zip file via CWM. Now when u will try to restart by choosing first option in CWM it will ask u to fix some permissions so that stock recovery dont get installed, click on yes and u r done now u have a permanent CWM.