Database Users

SGS2 Locked Logo Screen

Got a interesting news, cant mount my sd card, dont know if the sd is broken but isnt working.
Where should i found it when i mount from clockwork recovery?
I figured out the sd issue moving big files from a folder to other while its mounted, no move taked time to complete,
everyone was instantly, like when you move in the same hard drive.
So any advice on how to get my sd working, to transfer the CM to it.
The phone hard drive mount itself on I:
On android to mount a sd is like in Linux? Its mounted in a system folder?
Need help.
I tryed to install the CM Mod, first time, got the lastest file from 31/08, rename it on update.zip
Got root on my phone, using odin and replacing kernel.
Now it dont go after the first screen (Samsumg Galaxy S ii GT-I9100 yellow triangle with black ! on center.
I tried lots, i mean, lots of re instaling the .zip but it still dont pass that screen.
Right now only things i can do in phone is power+volume up+home button and go to ClockworkMod Recovery v4.0.0.2
or power+volume down+home and go to download screen.
Trying to install several times de CM Mod i got lots of lines (like 20+) them Error (code 7) install aborted.
Right now I need anything that make my phone back, any rom, custom android any version.
I explored the backup and restore menu and i got a restore point, it give me the restore complete, but still locked on that screen.
Please .zip file that ill make my cell back.
I checked de checksum and the CM file is ok

What kernel did you flash? You need to be sure the kernel you flash is for gs2.
Sent from my GT-I9100 using Tapatalk

You probably flashed a bad rom. Simply wipe data from clockworkmod and install a zipped rom from there.

news on post

On android to mount a sd is like in Linux? Its mounted in a system folder?
YES ,is called "external_sd" .As for your problem i suggest downloading a stock ROM+original kernell on your PC (KH3 as an example) .Enter downloading mode and flash it thru Odin than use an insecure kernell to root and have CWM back on your device to be able to flash the next ROM from your internal sd (internal memory) and continue experiencing
By the way ,the flashable zipes must be on internal memory for CWM to see tham
Your post should be in Q&A section

Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General

Can't flash JellyBlast ROM

I've tried twice, first time it went blank on boot up and I could only here tge boot sound. The second time it got stuck at the Samsung Galaxy Y logo.... I want this ROM ao bad. My phone has all tge requirements: rooted, has stock kernel etc.... And I follwed EVERY step correctly... What is the problem?
Sent from my GT-S5360 using Tapatalk 2

Mo0s said:
I've tried twice, first time it went blank on boot up and I could only here tge boot sound. The second time it got stuck at the Samsung Galaxy Y logo.... I want this ROM ao bad. My phone has all tge requirements: rooted, has stock kernel etc.... And I follwed EVERY step correctly... What is the problem?
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
Flash Stock ROM via ODIN (Let me know if you dont know what it is)
Put the ROM zip and Clockworkmod in the root of your SD card
Boot into Recovery(Three button combo)
Select apply update
Select the cwm file
Wipe data/factory reset
Wipe cache
Go to advanced
Wipe Dalvik cache
then select install zip from sd card
choose zip from SD card
let it install
Reboot
Report back here

tjsgy said:
Flash Stock ROM via ODIN (Let me know if you dont know what it is)
Put the ROM zip and Clockworkmod in the root of your SD card
Boot into Recovery(Three button combo)
Select apply update
Select the cwm file
Wipe data/factory reset
Wipe cache
Go to advanced
Wipe Dalvik cache
then select install zip from sd card
choose zip from SD card
let it install
Reboot
Report back here
Click to expand...
Click to collapse
Done.... Still stuck the Gakaxy Y logo
Sent from my GT-S5360 using Tapatalk 2

Before wiping data in CWM
Go to mounts and storage>check if "unmount system" is there. If its "mount system" select it and press the centre key which wil turn it to "unmount system".
Also wipe data and cache in stock recovery before going to CWM recovery.
Sent from my GT-S5360 using xda app-developers app

devilrulz4ever said:
Before wiping data in CWM
Go to mounts and storage>check if "unmount system" is there. If its "mount system" select it and press the centre key which wil turn it to "unmount system".
Also wipe data and cache in stock recovery before going to CWM recovery.
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Ok, can you please post an alternative link for the rom. I'm having problems downloading from the Mediafire link
Sent from my GT-S5360 using Tapatalk 2

http://www.mediafire.com/?m3cbyliuiek3cu3
Here was link Dude ...!!
Dont Waste Ur Time In Saying Thanks
Just Press It..!!

Cool.yash17 said:
http://www.mediafire.com/?m3cbyliuiek3cu3
Here was link Dude ...!!
Dont Waste Ur Time In Saying Thanks
Just Press It..!!
Click to expand...
Click to collapse
Does this one work?
Sent from my GT-S5360 using Tapatalk 2

I can flash jellyblast but im one the gt-5360T
can someone please explain how i can keep the autorotation from stock rom when i flash jellyblast

WEAREBORG2913 said:
can someone please explain how i can keep the autorotation from stock rom when i flash jellyblast
Click to expand...
Click to collapse
Auto rotation is already present in Jellyblast rom u can toggle it from status bar easily

funnypharmacist said:
Flash Stock ROM via ODIN (Let me know if you dont know what it is)
Put the ROM zip and Clockworkmod in the root of your SD card
Boot into Recovery(Three button combo)
Select apply update
Select the cwm file
Wipe data/factory reset
Wipe cache
Go to advanced
Wipe Dalvik cache
then select install zip from sd card
choose zip from SD card
let it install
Reboot
Report back here
Click to expand...
Click to collapse
I have the same problem and I followed the instructions on page 1 of the Jellyblast ROM exactly, also this one. After that I tried different ways with different CWM, choose an older version of the rom, reinstall Kuro Kernel after flashing Rom, delete second partition (ext2)... But I always get the bootloop.
Edit:
Solved: I made a stupid mistake. I chose on the download page the Update 5, because i thought it's the full ROM with update 5. Because of the green colour of the ROM download link, i didn't recognize that it's a link.

Problems with recovery mode

i have a samsung galaxy y (gt 5360), and
its updated to android 4.1(not officially-using jellyblast 3.0.3 rom)
Then i rooted it and i was
messing around with the
awesome power of root. now im trying to get a
different rom, and when i go to
recovery mode, i cant flash zip files, it always gives an error message"can't mount /sdcard (No such file or directory)".
But when i reboot the system i can mount sd card and can browse all files in sd card.
Does anyone know how to fix
this recovery problem??? PLEASE HELP?!!
Send from my jelly 1.0.1 using xda app-developers app

Try a different cwm_bla_bla.zip

But i cant flash any zip files... even cwm..
Sent from my jelly 1.0.1 using xda app-developers app

Go to CWM >> mounts and storage>> mount everything. [sys, data,cache,sd ]
It should work now.
Btw, which kernel??
Questions? Better go to [Help Thread] by Deadly
----------------------------------
Sent via a CM'd calculator

Change ur SD card and see.

Try to remove the sd card then put it back
And after that go to CWM Recovery
Go for Mounts and Storage
Mount /system
Mount /data
Mount /sdcard
Then try to flash the zip file
hope it helps
or you could just press thanks if it helped

If still not working...
If mounting your SD card or changing your SD card won't work, Try my Steps on flashing a new firmware:
1. Firstly, download/choose a firmware from here: http://forum.xda-developers.com/showthread.php?t=1465800
2. Once your download has finished, download Odin 1.85 from here: forum.xda-developers.com/attachment.php?attachmentid=581913
3. If you have installed Samsung Kies, stop it, also for adb sessions
4. Open Odin 1.85
5. Boot to download mode, make sure its shut down (Vol. Down + Home Button + Power Button)
6. When in download mode already, press Vol. Up button
7. Now, connect your phone to your pc, when Odin detects your phone you can now press the start button
8. Wait for installation to complete, it will reboot automatically,
9. When successfully booted, your done!
10. Enjoy! your newly fixed phone...
Above instructions are not fully detailed(COMPLETE), but it will work
For Full Instructions Go Here: http://forum.xda-developers.com/showpost.php?p=21846668&postcount=2
Instructions are posted in the same thread, though :angel:
Don't forget the thanks button if I helped!

Bryan.Next said:
If mounting your SD card or changing your SD card won't work, Try my Steps on flashing a new firmware:
1. Firstly, download/choose a firmware from here: http://forum.xda-developers.com/showthread.php?t=1465800
2. Once your download has finished, download Odin 1.85 from here: forum.xda-developers.com/attachment.php?attachmentid=581913
3. If you have installed Samsung Kies, stop it, also for adb sessions
4. Open Odin 1.85
5. Boot to download mode, make sure its shut down (Vol. Down + Home Button + Power Button)
6. When in download mode already, press Vol. Up button
7. Now, connect your phone to your pc, when Odin detects your phone you can now press the start button
8. Wait for installation to complete, it will reboot automatically,
9. When successfully booted, your done!
10. Enjoy! your newly fixed phone...
Above instructions are not fully detailed(COMPLETE), but it will work
For Full Instructions Go Here: http://forum.xda-developers.com/showpost.php?p=21846668&postcount=2
Instructions are posted in the same thread, though :angel:
Don't forget the thanks button if I helped!
Click to expand...
Click to collapse
-_-
Understand the problem correctly? I see your post and i knew you were just doing the 10 post thingy.
Good going but try to understand the prob and then help. Thank you!
And OP, there is no actual need of odin. Mount and try.
I feel your CWM is the problem. Flash stock kernel from Doky's thread and try again!
Questions? Better go to [Help Thread] by Deadly
----------------------------------
Sent via a CM'd calculator

My stock recovery dosnt support mounts&storage option.. to use cwm recovery i have to select a zip file from sdcard. But now i cant even mount sdcard so i cant use cwm too..
Iam using 2.6.35.7 [email protected] #18 kernal..
Sent from my jelly 4.1.2 using xda app-developers app

My recovery jst looks like dis... when i select 'apply update from sdcard' it gives an error msg lyk dis..
Sent from my jelly 4.1.2 using xda app-developers app

Try flashing stock kernel.
It should work.
Or else try to use a different SD.
First go with a different SD. Still if it doesn't mount, flash stock kernel and try. DONT TRY TO FLASH ANY OTHER KERNEL.
AND HAVE A BACKUP!
-------------------------------------
Questions? Better go to [Help Thread] by Deadly

Well i guess its a sd problem try formatting your sd card using a card reader or something then retry it doesn't work then try a different sd card to flash cwm bla bla.zip. I think it should work good

I had tried it bfore.... bt no use @all.. i thnk i hav problmz wth recovery mode..
Sent from my jelly 4.1.2

abyisforyou said:
I had tried it bfore.... bt no use @all.. i thnk i hav problmz wth recovery mode..
Sent from my jelly 4.1.2
Click to expand...
Click to collapse
1.Flash stock kernel.
2. Change SD
3. Download cwm of mad team.
4. Try flashing
If that doesn't work... flash via Odin.
-------------------------------------
Questions? Better go to [Help Thread] by Deadly

[GUIDE] Rooting your LAVA IRIS 504q without pc AND updating CWM Recovery

[GUIDE] Rooting your LAVA IRIS 504q without pc AND updating CWM Recovery
This Guide will help you to root your device without pc.. and updating CWM recovery...
Simplest way to root your device.
Tools required/Keep these applications ready:-
Framaroot
MobileUncle tools
recovery.img
Download from attachments
Procedure:-
1)Rooting:-
Open Framaroot Application
in dropdown by default its 'install SuperSu'......if not select 'install superSu' in the dropdown...
Below Select Boromir... Done..REBOOT Your device...
After clicking boromir ..it should say "supersu binaries installed.." Check 1st Screenshot in attached thumbnail... if it dsnt try again..
and once the message comes reboot....
Congrats You have your rooted device now..!! one step away from enjoying Custom Roms..!!
2) Updating Recovery
Download the recovery.img file from the attachments below.
Place the recovery.img file in your sd card
Open MobileUncleTools Application
Grant superuser permission
Click on Recovery Update
it will show you recovery.img file you placed in sd card
Select that recovery(see the 2nd screenshot in attachment..shld look like as in ss)
click ok..
It will ask to reboot into recovery mode... click yes to verify the update..from their you can reboot system again..
3) Further if you want to install any custom ROM:
Place the ROM file that is zip file in sd cArd
Switch of the phone
Hold the power button + Volume up button together(hold vol button till the boot logo appears)
once into recovery..
Common/IMPORTANT steps for installing any ROM:-
wipe data
wipe cache
mounts and storage--> format system
Advanced--->Wipe dalvik Cache
select Install zip from sdcard --> install from External sd card...
Navigate to zip file.. install...Enjoy your ROM..
CAUTION/WARNINGS:
Once you root your device..you VOID YOUR WARRANTY ...am NOT RESPONSIBLE for anything
Always have BACKUP before installing any ROM....just in case any problem occurs while flashing rom
If You BRICK your phone during any of these process... AM NOT RESPONSIBLE..
FLASH at Your OWN RISK
Thank You..... !!! Comment if any Doubts...!!
HIT THANKS IF TUTORIAL HELPED..... :good:
Join This FB Group :- https://www.facebook.com/groups/674412272632734/

I have Iris 356 and i'm thinking to root phone much easier with hope it works.
Download update*SuperSU*.zip and place in sdcard
Using ADB boot to recovery (Since It's not possible through Power+VolDown)
Flash .zip from sdcard
And That's it
Do you think my method would work??

arvindgr said:
I have Iris 356 and i'm thinking to root phone much easier with hope it works.
Download update*SuperSU*.zip and place in sdcard
Using ADB boot to recovery (Since It's not possible through Power+VolDown)
Flash .zip from sdcard
And That's it
Do you think my method would work??
Click to expand...
Click to collapse
Depends su.zip shld have rooting script too lol otherwise it will just install su apk...!! it shld wrk...... (Y)
Sent from my lava iris 504q using tapatalk

problem in moving pp to sd card
hi
i have rooted my phone and follow all the process as mentioned. thanks to u :good:
but even after rooted i am not been able to move many applications to my sd card. i already have app2sd .
face book , whts app are the two major app which are eating my space. please tell me how to move the app.
thanks in advnce

How to flash completely custom recovery no PC (cwm,twrp.etc)
---------- Post added at 10:57 AM ---------- Previous post was at 10:57 AM ----------
Kokochitnaywinaung said:
How to flash completely custom recovery no PC (cwm,twrp.etc)
Click to expand...
Click to collapse

thx mate you made my day, no other thread share recovery, mobile uncle tools and framaroot apks, without any hellish file host.

Help

I bricked my phone when i try to install android 4.4 kitkat. Can anyone show me how to unbrick it? or i just have to buy a new phone?

Mike Tran said:
I bricked my phone when i try to install android 4.4 kitkat. Can anyone show me how to unbrick it? or i just have to buy a new phone?
Click to expand...
Click to collapse
You dont have to buy a new phone! Flash the original stock firmware using odin.. follow this guide by marcussmith2626.

marcusflint said:
You dont have to buy a new phone! Flash the original stock firmware using odin.. follow this guide by marcussmith2626.
Click to expand...
Click to collapse
After I post this thread I rebooted my phone and suddenly i work (with android 4.4 layout which i have installed earlier and bricked my phone). But when i put SIM card in it, it can't startup, stuck at the welcome and keep rebooting. What should i do? Flash the original stock firmware?

Mike Tran said:
After I post this thread I rebooted my phone and suddenly i work (with android 4.4 layout which i have installed earlier and bricked my phone). But when i put SIM card in it, it can't startup, stuck at the welcome and keep rebooting. What should i do? Flash the original stock firmware?
Click to expand...
Click to collapse
so you are stuck on bootloop.. what rom are you on ?.. it can be a kernel problem too, so give some more details

marcusflint said:
so you are stuck on bootloop.. what rom are you on ?.. it can be a kernel problem too, so give some more details
Click to expand...
Click to collapse
Here are two link i downloaded from:
Kernel: https://www.dropbox.com/s/mtufgizocf5s04k/CyanogenMod Kernel.zip
Rom : http://www.mediafire.com/download/kl99v87c7w9zi7o/NewExperienceKitKatSpecialEdition_v1.0.zip

Mike Tran said:
Here are two link i downloaded from:
Rom: https://www.dropbox.com/s/mtufgizocf5s04k/CyanogenMod Kernel.zip
Kernel: http://www.mediafire.com/download/kl99v87c7w9zi7o/NewExperienceKitKatSpecialEdition_v1.0.zip
Click to expand...
Click to collapse
I think the rom is not installed correctly.. try installing it again by doing these steps..
1.Install the stock rom and then install percy_g2 CM #2 kernel via ODIN
2.After completion switch of phone and..go to recovery (press volume up+ home + power)
3.Go to mounts and storage and format system,data and cache
4.Go back and wipe data and cache
5.Again go to mounts and storage and mount system,data,cache and sd card.
6.Go to install zip>choose zip and select the rom
7.Wait for the installation to get completed.
8.After the installation is completed,go back and wipe data (don't wipe the cache partition this time)
9.Select 'Reboot system now'
10.Wait for the rom to get booted

marcusflint said:
I think the rom is not installed correctly.. try installing it again by doing these steps..
1.Install the stock rom and then install percy_g2 CM #2 kernel via ODIN
2.After completion switch of phone and..go to recovery (press volume up+ home + power)
3.Go to mounts and storage and format system,data and cache
4.Go back and wipe data and cache
5.Again go to mounts and storage and mount system,data,cache and sd card.
6.Go to install zip>choose zip and select the rom
7.Wait for the installation to get completed.
8.After the installation is completed,go back and wipe data (don't wipe the cache partition this time)
9.Select 'Reboot system now'
10.Wait for the rom to get booted
Click to expand...
Click to collapse
Thank, i'll try that

marcusflint said:
I think the rom is not installed correctly.. try installing it again by doing these steps..
1.Install the stock rom and then install percy_g2 CM #2 kernel via ODIN
2.After completion switch of phone and..go to recovery (press volume up+ home + power)
3.Go to mounts and storage and format system,data and cache
4.Go back and wipe data and cache
5.Again go to mounts and storage and mount system,data,cache and sd card.
6.Go to install zip>choose zip and select the rom
7.Wait for the installation to get completed.
8.After the installation is completed,go back and wipe data (don't wipe the cache partition this time)
9.Select 'Reboot system now'
10.Wait for the rom to get booted
Click to expand...
Click to collapse
I'm sorry i cause i wrote wrong, pls read again the link i gave you. Also, the link you gave me was to download kernel, wasn't it? and install via Odin mean i have to connect my phone with pc and switch to download mode, my phone work with Odin3-v1.85

Mike Tran said:
I'm sorry i cause i wrote wrong, pls read again the link i gave you. Also, the link you gave me was to download kernel, wasn't it? and install via Odin mean i have to connect my phone with pc and switch to download mode, my phone work with Odin3-v1.85
Click to expand...
Click to collapse
Yes install the kernel that way.. then install your kitkat Rom through cwm recovery like i said in the steps