Database Users

[Q] Half-bricked phone (USB isn't working)

Hi all
my USB doesn't seem to work anymore. However I don't believe it is a HW failure.
In Linux, when I connect my I9000 to usb, I see the following in the syslog:
Oct 14 17:17:29 xsdnied kernel: [ 1222.601065] usb 3-1: new low speed USB device using uhci_hcd and address 3
Oct 14 17:17:29 xsdnied kernel: [ 1222.670996] hub 3-0:1.0: unable to enumerate USB device on port 1
This happens both in "Download mode" and if I boot in OS and choose "Mass storage for USB", also in Debug Dev Mode ON.
Also in Windows Odin can't see the device via USB. Windows at least told me under certain condition that a new USB device detected but it failed to recognize it (albeit all needed drivers have been already installed)
The phone is working, but I can't even install CM7.1 on it because of signature verification error that seems to be unavoidable under <3e>.
Any idea how to fix this situation?

have u tried a different pc?

hezibanda said:
have u tried a different pc?
Click to expand...
Click to collapse
I've tried two. at least one of them was already working via usb with this I9000 both in windows and linux

Have you reinstalled the drivers, or tried another cable?

Talon26 said:
Have you reinstalled the drivers, or tried another cable?
Click to expand...
Click to collapse
I've tried another cable. I connect/disconnect several times and once of 20 attempts Windows makes its usual USB-discovery sound, but then says something like: USB-device is either broken or device is not recognized.
Well, just took another SGS1 that we have in our family and tested -- both cables are 100% OK.
Hm, maybe USB is indeed broken and that's it :-/
But how? why? Charging after all works.

Got the same problem bro...
One contact broke on the USB port, bricked my Phone too. I wasnt able to use odin to flash my Phone. The crazy thing is that my phone was able to charge but no connection to the PC.
I sent the bricked phone to an thrid partner from samsung, they flashed my phone and repaired the USB port. No is everything okay.
I tried several things to get the USB to work, nothing helped.

[Q] Zombie Milestone 2 HELP!!!!!!!!!!!!!

Hello folks,
Ive written beforehand in here asking for a little issue I had with my milestone 2 (Assuming a dead usb port and a bootloop)
anyway I got replaced the USB connector, but My phone wont show up on RSD lite... No matter what version I use (tried everything from 4.9 to the latest, nor the drivers.) Im on win 7 ultimate x64, but tried on ubuntu, win xp and win 7x32 having no success.
The phone WONT charge over usb, even with it's usb port replaced.
Teh phone will enter stock recovery, and bootloader mode ( it´s on 07.12)
The phone will also recognize it is "connected" on bootloader (It reads USB Connected OK to program), but the PC wont recognize it.
any suggestions???
may I have to flash it with a "box"??

donlloreda said:
Hello folks,
Ive written beforehand in here asking for a little issue I had with my milestone 2 (Assuming a dead usb port and a bootloop)
anyway I got replaced the USB connector, but My phone wont show up on RSD lite... No matter what version I use (tried everything from 4.9 to the latest, nor the drivers.) Im on win 7 ultimate x64, but tried on ubuntu, win xp and win 7x32 having no success.
The phone WONT charge over usb, even with it's usb port replaced.
Teh phone will enter stock recovery, and bootloader mode ( it´s on 07.12)
The phone will also recognize it is "connected" on bootloader (It reads USB Connected OK to program), but the PC wont recognize it.
any suggestions???
may I have to flash it with a "box"??
Click to expand...
Click to collapse
Either your USB port got replaced badly, or you don't have the drivers: http://www.motorola.com/staticfiles/Support/Experiences/Global_Drivers/USB_Drivers_bit_4.7.1.zip
Try a different cable, diferent port, different computer...

TMobile G2 cant connect to PC over wire

So, I cant seem to be able to connect my G2 to the PC via USB cable. I get "usb device not recognized" error, and when looking for the device via LGPC Suite, it says driver not installed and attempts to re-install the driver to no avail. Im using Win 7 64 bit. Here's what Ive done to attempt to fix it:
Tried uninstalling and reinstalling both the driver and LGPC Suite in my normal user account and in admin admin account.
Redownloaded both driver and LGPC Suite and doing the above.
Tried 3 different USB cables.
Tried 2 different USB ports.
Yes, Im changing the connection options on the phone from MTP and LG Software.
Phone charges normally over USB.
I *can* however connect to LGPC Suite via wifi successfully.
Any ideas? Im stumped.

blackangst said:
So, I cant seem to be able to connect my G2 to the PC via USB cable. I get "usb device not recognized" error, and when looking for the device via LGPC Suite, it says driver not installed and attempts to re-install the driver to no avail. Im using Win 7 64 bit. Here's what Ive done to attempt to fix it:
Tried uninstalling and reinstalling both the driver and LGPC Suite in my normal user account and in admin admin account.
Redownloaded both driver and LGPC Suite and doing the above.
Tried 3 different USB cables.
Tried 2 different USB ports.
Yes, Im changing the connection options on the phone from MTP and LG Software.
Phone charges normally over USB.
I *can* however connect to LGPC Suite via wifi successfully.
Any ideas? Im stumped.
Click to expand...
Click to collapse
Sorry for bumping old thread, but have you found a solution? I found my self in exactly same situation as you describe.
Phone is in LG Software mode
LG Suite can find the phone over Wi-fi, other modes work through USB.
Tried on two different computers, with win7/win8 respectively.
Stock EU ROM, just bought it.
Tried different USB ports.
Yet PC doesn't recognize it :/
EDIT: Never mind, solved it by following the following instructions in another thread:
cmahendra said:
You must be on 64 bit windows. Not even on 64bit, Still try this...
1) Uninstall LG Drivers, LG PC Suite and anything you see named LG. Restart PC.
2) Install latest LG Driver from this post (step 4)
3) Install Optional MTP Driver from this post (step 4)
4) Open Windows Device Manager (just to watch whats happening.)
5) Disconnect Internet (To avoid stupid online WDM drivers)
6) Connect phone with Usb and let drivers install automatically. Give it some time to install drivers keeping watch on Device Manager window.
7) Keep changing USB connect modes to all modes one-by-one on Phone and let drivers install.
You should see MTP drivers installed now. If this does not help, cant think of anything else. If this works, press THANKS button
EDIT: Connect USB at backside of pc, directly to USB on pc motherboard.
Click to expand...
Click to collapse

connectivity issue

hello
i have a problem with my g928f
my issue is that it can not be regognized by the windows
i have tried at my desktop with win 10 and at my laptop with windows 7 and at both says unknown device,
i have tried everything i know of
unistall everything from the pc regarding samsung drivers
install it again , nothing
install smart switch , nothing
install kies, nothing
run odin , not even see the phone at download mode
made factory reset from recovery , nothing
charge is working just fine both from pc and my wall charger
i tried mhl hdmi and nothing happened
tried just now otg cable with a usb drive , again nothing
just a week ago i was using it just fine with my pc
should i take it to a store to check my micro usb port??

noone??
today i replaced the screen with a new one witch had a new usb dock on it and the problem is still here
i can not connect it to any pc.
i cann't flash the stock rom because odin is not see it also

is it possible to be a rom problem????
i can't flash the stock one because of the usb issue
but i think i can download another lollipop rom to give it a try.

Have you made sure that it is set as MTP?
Setting - Storage - USB.

Check if the device gets connected in Fastboot mode. If it doesn't then it would be your USB.

sideload is not working either
usb is brand new and original.

is there a way to flash stock rom via recovery?

OPO 2 "no OS installed"

Hi guys,
i knew this topic was dicussed a few times, but i didn´t find a solution which fits for me.
Unfortunately i wiped my OnePlus 2 using twrp and since then i can´t used it, it only says "no OS installed".
No USB connection is found, i can not find it as an adb device (daemon not running. starting it now on port 5037) and USB OTG isn´t working either.
I tried different drivers for the device (actually i uses a qualcomm 9008 driver) but nothing helps.
Is there a change to rescue the phone?
Many thanks in advance!

Were you able to get into recovery mode by pressing and holding Volume Up, then pressing Power once? How about Fastboot mode by pressing and holding Volume Down, then pressing Power once?
Also, what recovery do you have?

Tristan Phan said:
Were you able to get into recovery mode by pressing and holding Volume Up, then pressing Power once? How about Fastboot mode by pressing and holding Volume Down, then pressing Power once?
Also, what recovery do you have?
Click to expand...
Click to collapse
I am able to get into both modes, as well Fastboot mode as recovery. But i am not able to get a connection to my pc or other devices.
Using TWRP 3.0.2-2 as Recovery.

try to connect usb storage with otg

chxei said:
try to connect usb storage with otg
Click to expand...
Click to collapse
Unfortunately usb otg is a big problem at the Oneplus 2. Until now i didn´t find an adapter that works.

Seesternfan said:
Hi guys,
i knew this topic was dicussed a few times, but i didn´t find a solution which fits for me.
Unfortunately i wiped my OnePlus 2 using twrp and since then i can´t used it, it only says "no OS installed".
No USB connection is found, i can not find it as an adb device (daemon not running. starting it now on port 5037) and USB OTG isn´t working either.
I tried different drivers for the device (actually i uses a qualcomm 9008 driver) but nothing helps.
Is there a change to rescue the phone?
Many thanks in advance!
Click to expand...
Click to collapse
Hi I had the same problem a few months ago, my phone wasn´t recognized by my pc because I was using the official charging cable so I bought a cheap USB-C cable and I was able to connect it to my pc and reinstall the OS. Hope this helps.

So your device isn't recognized in Fastboot mode? Do you have any ROMs downloaded on your phone already?

coderch123 said:
Hi I had the same problem a few months ago, my phone wasn´t recognized by my pc because I was using the official charging cable so I bought a cheap USB-C cable and I was able to connect it to my pc and reinstall the OS. Hope this helps.
Click to expand...
Click to collapse
My original cable doesn´t work anyway, so i was forced to try another cable. Unfortunately this didn´t work either.

Tristan Phan said:
So your device isn't recognized in Fastboot mode? Do you have any ROMs downloaded on your phone already?
Click to expand...
Click to collapse
I´m not able to get a ROM on my device, this is my problem.
When I try to connect my phone using adb this is happening:
"C:\Users\Seesternfan>adb devices
List of devices attached
* daemon not running. starting it now on port 5037 *
* daemon started successfully *"
I tried different tips from the internet but i wasn´t able to get a connection with my phone.

Seesternfan said:
I´m not able to get a ROM on my device, this is my problem.
When I try to connect my phone using adb this is happening:
"C:\Users\Seesternfan>adb devices
List of devices attached
* daemon not running. starting it now on port 5037 *
* daemon started successfully *"
I tried different tips from the internet but i wasn´t able to get a connection with my phone.
Click to expand...
Click to collapse
If you can get your hands on a USB-OTG cable, definitely do so to get a ROM onto your phone. Have you tried MTP? If you enable MTP under Mount in TWRP, does your PC recognize it in Windows Explorer?

Tristan Phan said:
If you can get your hands on a USB-OTG cable, definitely do so to get a ROM onto your phone. Have you tried MTP? If you enable MTP under Mount in TWRP, does your PC recognize it in Windows Explorer?
Click to expand...
Click to collapse
I have two USB-OTG cables at home. The problem is that the OnePlus 2 USB C port is no ordinary USB C port. Till now i didn´t find a cable that works, except the original one which is out of stock.
MTP is enabled but there is no difference to before.

Have tried reinstalling the drivers?

@Seesternfan
Can it be possible to get remote access to your PC, so that I can help you?

Is your USB-OTG cable a USB-C one? I use a Micro-USB USB-OTG cable with an Anker Micro-USB to USB-C adapter.