Hello friends.
I'm russian. I try to write correct and clear.
I have a really hard problem with my LG LS980 - it is bricked.
I read many instructions and threads about restoring but nothing helped me.
When I flash my phone by Lg Flash Tool it stops with error: Device midel is different.
As you can see on the first attached picture the phone's model is the same as dll's model.
When I flashing it with another dll(LGUP_8974.dll) it writes CrossDL error(the second picture I attached).
Is there any possibility to ignore model verification in LG Flash Tool?
Now my LS980 has 3 modes: Stock Recovery, Download Mode, Black screen after LGs logo when booting.
In every mode there are the same devices and drivers(the same as on the Download mode) in device manager.
When flashing by KDZ for another model(D802) it get error on 49%.
I have Riff Box but there no possibility to ressurect at this moment it doesn't supports.
Help me please!
Related
Hey Guys,
Hoping someone can help me out here. I've got a friend's LG G2 and I'm trying to help him get it working. When I first got the device, it just booted to a black screen and when plugged into Ubuntu, it would show 15 or so drives that were unable to mount. I followed a guide to fix through Ubuntu and eventually got it to boot to where it would show a black screen with small white text indicating it was in fastboot mode. In fastboot mode, I followed this guide: https://www.youtube.com/watch?v=YEqEE9Qb8Sk and eventually got it to boot showing the LG Screen. I am able to get it into Download Mode and Recovery mode (but performing the hard reset doesn't work, as when the Android Man screen loads up with the progress bar underneath it stays on the screen for about 15 seconds before restarting and staying at the LG logo screen. No matter which Tot file for the D800 I flash through LG Flash Tool, it fails after about 3 seconds stating Cross DL (850) to (800). He had tried to use an G3 Rom on the device, which is what bricked it in the first place. I've noticed that the device is showing a blank IMEI in the flash tool as well. I've also tried using the DLL posted in @hyelton 's guide (LGUP_8974.dll) and it still gives me that same error.
Hoping someone here might have an idea of what I can try next to get this thing working again.
Thanks!
Mark
Fixed
All right guys. After much painstaking searching, I've finally found a solution, thanks to THIS REDDIT THREAD. I used a hex editor to modify the first line mentioning "D800" in the TOT file that is provided along with the link to the YouTube video in my OP, changing it to "D850." I used Hex Editor Neo to do this. This should work with any LG G2 that has had incorrect firmware flashed on it when you are getting an error of CrossDL from the LG Flash Tool.
Hello,
So i decided to go @ stock, and used lg flash tool to flash d802 .kdz, but i downloaded the wrong one (europe version, mine is Singapour).
So now my phone is bricked i think, it shows either black screen, or backlight with screen artfacts.
On device manager i see only "GENERIC MTP USB", and if i try to go on download mode (nothing is displayed, only black screen), i see LGE android phone.
So at what level is it bricked ? and what are my options.
Thank you
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Did you try doing a upgrade recovery with the LG Mobile Support Tool?
amin44 said:
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Click to expand...
Click to collapse
Thanks that worked.
While trying to install custom recovery through autorec my LG G2 sold as D802 and infact an LS980 got bricked and showing white pixelated lines and black screen.
- No recovery mode
-No download mode shown on screen
- No fastboot mode shown on screen
-Phone shows up as unspecified android device on windows 10 and connected through Marshall London Bootloader Interface
-Phone switches off and on while pressing power key, rest not known
-Flashtool doesn't recognize any device.
-command prompt in fastboot tool can erase data on the phone, but can't flash any img files
I've searched and read various forms and articles through internet. no one has found any proper solution though some people claims that hex code editing or flashing a partition and a tot file through fastboot mode may solve the issue and tried a few of them. No positive sign till now, I'm r trying out the fastboot method right now, But I'm not sure whether my phone is switching into fastboot mode or not
Can some one please guide me to get the partition file (laf.img) for LS980. ??????????
And if someone can share some serious input on this problem, it'll be really useful for a lot of users includng me.
Or even suggest some methods for trying out.
whenever i got stuck with this sort of errors i used to find my way out using reading tutorials and forums on xda. But this time i cant find a way out.
prnv said:
While trying to install custom recovery through autorec my LG G2 sold as D802 and infact an LS980 got bricked and showing white pixelated lines and black screen.
- No recovery mode
-No download mode shown on screen
- No fastboot mode shown on screen
-Phone shows up as unspecified android device on windows 10 and connected through Marshall London Bootloader Interface
-Phone switches off and on while pressing power key, rest not known
-Flashtool doesn't recognize any device.
-command prompt in fastboot tool can erase data on the phone, but can't flash any img files
I've searched and read various forms and articles through internet. no one has found any proper solution though some people claims that hex code editing or flashing a partition and a tot file through fastboot mode may solve the issue and tried a few of them. No positive sign till now, I'm r trying out the fastboot method right now, But I'm not sure whether my phone is switching into fastboot mode or not
Can some one please guide me to get the partition file (laf.img) for LS980. ??????????
And if someone can share some serious input on this problem, it'll be really useful for a lot of users includng me.
Or even suggest some methods for trying out.
whenever i got stuck with this sort of errors i used to find my way out using reading tutorials and forums on xda. But this time i cant find a way out.
Click to expand...
Click to collapse
i would suggest just to be sure before you can do more harm.. to post and ask in the goign back to stock thread.. you will get help there
Same issue
I have the same story with my LG G2 D802 any luck?
I have the same issue... Please give updates on your progress
I have Got The Same Issue.....no COM port so as to flash tot, i cant also flash using flash tools. Somebody Help
Same here, you guys burn your G2?
Looks like I'm a bit late for the party. Well i ended up my lg g2 ls980 (sold as d802) in the same condition. I fixed it by booting into qhsusb_bulk mode by shorting the capacitors and using srktool. Now my phone can boot into download mode!
(Note: this method only works if your phone shows up as qhsusb_bulk and not qdloader or something like that)
I Need Your Help Please ! :crying:
I tried to update my G2 yesterday with a D802 Firmware "I didn't knew it was a Refurbished LS980 " after it finished, I got stuck into an
eternal boot-loop with no recovery and no download mode.
My phone is detected as an MTP, But doesn't install. after some tries to install "the MTP driver " it just shows unknown device.
I Would like to know what to do now ?
Hi!
Forum Moderator Art Vanderlay wrote a few things about refurbished phones:
http://forum.xda-developers.com/lg-g2/general/warning-to-people-bought-phones-ebay-t2991195
And some guides to rescue the phone can be found here:
http://forum.xda-developers.com/showpost.php?p=63327417&postcount=4
Thanx
I found the solution i forced it to "9008 mode" than i used srk am happy now to figure out how to get signal and data or at last make a call cause no MEID.
Hello,
Recently i was given a LG L Fino to try to bring back to life. Something that i was not very successful up to now.
When the device is turned on it only loads up to the LG logo loading screen and freezes there. The hard resent back buttons combination and the download mode are non operational as well. In particular the download mode shows error:
Secure booting Error!
Cause : boot certification verify
meaning that flashing the stock .kdz image wont be possible.
I had revised some of the possible hardbrick fixes available in the forum but non of them worked as well. Trying to scan and flash the .tot files, with BoardDiag, was also not possible as the phone was not properly recognized by my machine and i did not manage to find the exact com port. I had tried a few but with no success.
If you have any suggestions i would be very happy and thankful to hear and try them.
Thank you!