[Q] thethering not enable in G2 Sprint - any way found? - G2 Q&A, Help & Troubleshooting

Any one found to enable the thethering option in SPRINT LG G2 ?
as it is not visible...
can any one please let me know about it..
Thank you.

[email protected] said:
Any one found to enable the thethering option in SPRINT LG G2 ?
as it is not visible...
can any one please let me know about it..
Thank you.
Click to expand...
Click to collapse
Are you pertaining to WiFi Tethering or USB Tethering?

Airol said:
Are you pertaining to WiFi Tethering or USB Tethering?
Click to expand...
Click to collapse
Both if possible
Preferred WiFI Tether an d
later USB tether

i found this and am planning on trying it once i can figure out whats up with my phone
/forum.xda-developers.com/showthread.php?t=2584775

Mobile Hotspot via Wi-Fi
Setting up Mobile Hotspot:
1.While viewing the home screen, press the "menu" button
2.Select "System settings"
3.Tap the "Networks" icon to display its tab
4.Under "Connectivity", tap "Tethering & Networks"
5.Tap "Mobile HotSpot" and then tap "Configure Mobile HotSpot"
6.If necessary, edit the available (following) settings:
•Network SSID
•SSID Visibility
•Max client allowed to tether
•Security
•Password
7.Once finished, tap "Save"
Enabling / Disabling Mobile Hotspot:
1.While on the home screen, press the "Menu" button
2.Select "System settings"
3.Tap the "Networks" icon
4.Under "Connectivity", tap "Tethering & Networks"
5.Tap "Mobile HotSpot"
6.Mark or unmark the check box associated with "Mobile HotSpot" to enable or disable the feature
Tethering Via USB
Drivers for Computers:
1.Connect your phone to your PC using the USB cable that came with your handset
2.While on the home screen, press the "Menu" button
3.Select "System settings"
4.Tap the "Networks" icon to display its tab
5.Under "Connectivity", tap "Tethering & Networks"
6.Tap the switch associated with "USB tethering" to enable the feature
7.Once the "First Time User" window appears, tap "OK"
8.If your PC runs on Windows XP, tap "Download Windows XP driver" and then follow the on-screen prompts. Otherwise, on Linux, Windows Vista and Windows 7, the systems will automatically download the necessary drivers
Tethering Via USB:
To share your mobile data connection with your computer, follow the steps below
1.Connect your phone to your PC using the USB cable
2.While viewing the home screen, press the "Menu" button
3.Select "System settings"
4.Tap the "Networks" icon
5.Under "Connectivity", tap "Tethering & Networks"
6.Tap the switch associated with "USB tethering" to enable the feature
7.Assuming that the "First time use" window appears, tap "OK". Otherwise, press "Cancel"

Related

USB Internet Connection

Hi,
For some strange reason, I'm unable to connect to the Internet when I have my USB connected to my 8125 to a computer which has internet connection (the computer I'm using right now). It constantly tries to dial the GPRS.
It used to connect to the Internet and never dials to any GPRS. This started happening today. I haven't changed anything at all.
When I open PIE it will load the MSN page but still tries to dial. I try another URL (yahoo) and it will not connect. I believe its displaying the MSN homepage using the temporary files.
Please help!
Try a couple things...
On the PPC go to Start > Settings > Connections Tab > Network Cards > and make sure "The Internet" is chosen for "My network connects to:" and click "Ok"
Next, on your computer, open ActiveSync > File > Connection Settings > and make sure "The Internet" is chosen for "This computer is connected to:" and click "Ok"
(Even if those settings are correct already, still pull down the menus and choose them again, clicking ok afterwards, everyone knows windows likes to accidentally forget settings even when they are still correctly displayed) Reboot the computer and PPC, then try again
If all that fails, then on the PPC go to Start > Settings > Connections Tab > Connections > Advanced Tab > Select Networks > and click "Edit" for whichever connection you have chosen for "Programs that automatically connect to the internet should connect using:" > on the modem tab make sure "auto pick" is selected > on the "proxy settings" tab make sure "this network connects to the internet" is checked > make sure "this network uses a proxy server..." is UNCHECKED > click "Ok" > click "Ok" > click "Ok"
That should do it for ya

How can I provide internet from my Desktop PC to my Pocket PC via bluetooth?

Omnia, WM 6.1
I have used Activesync but the connection is bad. Sometimes I cannot open some sites, other times - I can open them. Weird...
I am trying something else: I went to Settings - Connections, I added new connection, and under "add new modem connection" -> "select a modem" there is Bluetooth! What is this, can I use my PC as a bluetooth modem?
http://wiki.xda-developers.com/index.php?pagename=InternetOverBluetoothNetwork
Rudegar, thanks for the link, but the following part does not apply to my WM 6.1-based device. Where can I find these things in WM6.1:
# Tap the Bluetooth icon and tap the link saying <u>Bluetooth Manager</u>.
# Tap the starred Bluetooth icon.
# Tap the Join a personal network.
# Select Join a personal network option and tap Next.
# After your Connection Wizard sees your computer, select it and select Finish so that your HTC Creates a shortcut for this connection named Network with '?InsertYourComputersNameHere'. Please note that there is no need for a secure/encrypted connection.
# Double tap or hold and select Connect to the Network with '?InsertYourComputersNameHere' to make a connection with your access point.
# At this point or later, your HTC will ask you if this connection is a Work or Internet connection. I have chosen this as my Work connection.
On my device there is neither "Bluetooth Manager", nor "Join a personal network"
Meanwhile I am trying something else: http://media.snimka.bg/2551/011357944-big.jpg
I went to Settings -> Connections -> Connections, I added new connection, and under "add new modem connection" -> "select a modem" there is Bluetooth! What is this, can I use my PC as a bluetooth modem?

How to disable data connection manually in Omnia II (WM 6.5)

Hi All,
I've got Omnia II with WM 6.5 in which i have to manually turn off / disconnect the data connection all the times and it always turn on again after a while.
can anyone recommend or suggest which way / tools to disable the non-wifi data connection only ? so far i only i need GSM and the Wifi only to reduce unwanted cost.
Thanks.
Open Samsung Settings (press the big button) and hit on the top line the key with the arrow left/right.
Select the Option "Wireless Manager" - and take a look at the right bottom corner. There you see "MENUE" - press it and select "Data con. Settings".
Tick all three Options and select the "TIME OFF" at "NO PACKET FOR". Switch device off and on again and from now disconect the WiFi connection with a short press on the PowerOff Button.
yes that works man, now I'm using nodata.cab to make the setting permanent.
How to disable data connection manually in Omnia II (WM 6.5)-do not see "data" option
".....There you see "MENUE" - press it and select "Data con. Settings".
Tick all three Options and select the "TIME OFF" at "NO PACKET FOR". "
With my i920 all is on for "phone, bluetooth, wi-fi,data"
I do not see any "Data con Settings" screen when I press "Menu" - only see "Phone Setting, Bluetooth,Wi-Fi". How can I see "Data" to make change?
Thank.

[Q] wifi Sharing

i followed the below step to create a WIFI hot spot from my windows XP. however my Galaxy TAB don't see the network i created but i can see with other devices and computer is there is a trick to it ?
#
Click to open the "Start" menu, then click to open the Control Panel. In the Control Panel, click on "Network Connections."
# 2
Right-click the Ethernet network connection with which the computer accesses the Internet and click "Properties."
# 3
Click on the "Advanced" tab of the "Properties" dialogue box. Click to mark the box next to "Allow other network users to connect through this computer's Internet connection." Click the "OK" button to close the dialogue box. If a "Local Network" message box pops up with an explanation, click the "Yes" button to proceed.
# 4
Right-click on your wireless connection in "Network Connections." If the connection is disabled, you need to enable it. Right-click again if necessary and choose "Properties" in the right-click menu.
# 5
Select the "Wireless Networks" tab in the "Properties" dialogue box. Click the "Add" button in the "Preferred networks" region of the dialogue. This opens a dialogue box called "Wireless network properties."
# 6
Select the "Association" tab of the "Wireless network properties" dialogue. Type your choice of name for your Wi-Fi network in the "Network name (SSID)" field and check the "This is a computer-to-computer (ad hoc) network" box.
# 7
Ensure that the "The key is provided for me automatically" box at the bottom of the dialogue box remains unchecked.
# 8
Choose "Open" in the "Network Authentication" drop down menu and choose "WEP" in the "Data encryption" drop down menu.
# 9
Type your choice of password in the "Network key" and "Confirm network key" fields.
# 10
Click the "OK" button to save changes and close the "Wireless network properties" dialogue box. Click the "OK" button on the wireless network adapter's "Properties" dialogue box.
Not 100% clear on what you are hoping to achieve. The purpose of the WiFi hotspot function is that the Tab can be used as a WiFi access point, the PCs you connect to the Tab hotspot should be able to see the internet via the Tabs mobile data connection (3G/GPRS). If you achieved this then you had it working correctly. I don't believe there is any functionality intended to let the Tab access data on the PCs connected to its hotspot.
Hey thanks for the reply. I'm sorry i was not clear.
I'm not trying to connect the PC using the Tablet. I'm tryin to coonect the tablet using the PC.
My PC connect to the internet using Wired LAN. i wanna use the the PC WIFI to send my WIRED LAN to the tablet ( Network Sharing )
Thanks again
As standard, Android can't see and won't connect to adhoc networks (which is what your "hotspot" is).
Search these forums for wpa_supplicant.conf, or adhoc, for the solution.
Regards,
Dave
Thanks a bunch guys. one last question. i found a post that talk about this, and have a patch to download. bu im not sure how to download it into the Tablet, and if it will work on the tablet. would that effect my reguler WIFI if i download it ?
Thank s again
mssidah said:
Thanks a bunch guys. one last question. i found a post that talk about this, and have a patch to download. bu im not sure how to download it into the Tablet, and if it will work on the tablet. would that effect my reguler WIFI if i download it ?
Thank s again
Click to expand...
Click to collapse
no, you can use both adhoc mode(pc to tablet connection) and infrastructure mode( access point to tablet) if you do the hack.
you need to be rooted and with root explorer installed on you tablet to achieve the trick.
We almost can do the ad hoc patch - but not quite yet - through clockwork recovery - which is still under development. So what other flashing tool can we use?

[q] acces to internet error 503,internal error ...royal ginger 2.1 simple mobile

Does anyone know how to fix this it pisses me off so bad i took it to a tmobile guy he fixed it like in a couple min he said he use to hack phones but then i reset the phone and the error came back and the guy dont work there anymore to help me
503 Service Unavailable
The server is currently unavailable (because it is overloaded or down for maintenance).[2] Generally, this is a temporary state or look up your Network setting on the phone to make sure the APN's are right....
HTC MyTouch (4G, 3G Slide, 3G) - Internet and MMS
From the home screen
Press Menu
Select "Settings"
Select "Wireless & networks"
Check that "Airplane mode" is unchecked and "Mobile network" is checked
Select "Mobile Networks"
Select "Access Point Names"
Press Menu
Select "Reset to Default"
Select "T-Mobile Data"
Select "Name" and populate the field with "SIMPLE Data"
Select "OK"
Select "APN" and populate the field with "simple"�*CASE SENSITIVE*
Select "OK"
Press Menu
Select "Save"
Select "T-Mobile MMS"
Select "Name" and populate the field with "SIMPLE MMS"
Select "OK"
Select "APN" and populate the field with "simple" *CASE SENSITIVE*
Select "OK"
Select "MMSC" and add "smpl." after "http://" and before "mms."
Field should show "http://smpl.mms.msg.eng.t-mobile.com/mms/wapenc"
Select "OK"
Press Menu
Select "Save"
Reboot phone.
Your Internet & MMS is now configured!

Categories

Resources