Hopeless.... - G2 Q&A, Help & Troubleshooting

there are 6 days from now...l have no recovery,download or fastboot mode...only this fu**ing LG logo...l can use adb commands on windows 8.1 but it not help very much because my device is not rooted and and can't run adb shell( device read-only error)...all l have to do is to root the phone, BUT HOW..I've tried manualy install root to get adb shell work...no chance...l have another laptop with ubuntu,but this time my device is attached offline on ubuntu terminal...HELP!I dont know what to do:crying:
edit:LG G2 F320L
is there some way to get fastboot mode working if i'm not rooted?...
edit2: 3 weeks and l found nothing for my phone:crying
edit3: 4 weeks and no chance to get my phone back ...

Which phone? Asking for help with zero info on what you're using and what you've done isn't likely to illicit much.
Just do a full reset (from power on) and then flash stock kdz.

LenAsh said:
Which phone? Asking for help with zero info on what you're using and what you've done isn't likely to illicit much.
Just do a full reset (from power on) and then flash stock kdz.
Click to expand...
Click to collapse
sorry...F320L korean version
How can l do a full reset from power on?

Press and hold power button until it turns off. Then press and hold power button and volume down then power button thrice
Sent from my LG-D802 using XDA Premium 4 mobile app

vPro97 said:
Press and hold power button until it turns off. Then press and hold power button and volume down then power button thrice
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
l can't turn it off with power button...when l press it my device restart and lget LG logo..l can turn it off only if l pull the battery out.....tried this trick with physical button ....but it doesn't work:crying:

manager77 said:
there are 6 days from now...l have no recovery,download or fastboot mode...only this fu**ing LG logo...l can use adb commands on windows 8.1 but it not help very much because my device is not rooted and and can't run adb shell( device read-only error)...all l have to do is to root the phone, BUT HOW..I've tried manualy install root to get adb shell work...no chance...l have another laptop with ubuntu,but this time my device is attached offline on ubuntu terminal...HELP!I dont know what to do:crying:
edit:LG G2 F320L
is there some way to get fastboot mode working if i'm not rooted?...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2582142 , hope it helps bro , goodluck

l send my phone to LG service 2 day ago and they contact me today....bad news: my phone can not boot to the end and can't be recognized by any device(original LG tools and cables etc.) to be repaired.l have to send it back...... where the phone was purchased(Singapore)

I feel bad for you but hope you've learn a lesson, read more and more and more before doing anything to your phone. If you don't know or not sure or unclear, don't go for it yet.
Anyway, still under warranty?

votinh said:
I feel bad for you but hope you've learn a lesson, read more and more and more before doing anything to your phone. If you don't know or not sure or unclear, don't go for it yet.
Anyway, still under warranty?
Click to expand...
Click to collapse
No warranty...and believe me that l always read before making something wrong with my phones...bad luck....my last hope it could be jtag solution but is expensive..

To switch off your phone. Hold the power button about 10 second. you will see screen completely black, or unplug your battery.
To do hardware reset for F320L. Press and hold power+ volume-, when LG logo appear release power button only and press power again. You can see Hard reset mode.
After that, if your phone still not reboot. Try to flash KDZ or TOT in download mode.
To access download mode : Press volume- and plug your phone to PC
If you can not access download mode. plug your phone to computer and check what driver you have in device manager. If you got only Qusb-Bulk. Its bricked completely.
If you plug your phone to Windows and got a lot of message come up to format it. press cancel and don't format it. then follow :http://forum.xda-developers.com/showthread.php?t=2582142

cccho said:
To switch off your phone. Hold the power button about 10 second. you will see screen completely black, or unplug your battery.
To do hardware reset for F320L. Press and hold power+ volume-, when LG logo appear release power button only and press power again. You can see Hard reset mode.
After that, if your phone still not reboot. Try to flash KDZ or TOT in download mode.
To access download mode : Press volume- and plug your phone to PC
If you can not access download mode. plug your phone to computer and check what driver you have in device manager. If you got only Qusb-Bulk. Its bricked completely.
If you plug your phone to Windows and got a lot of message come up to format it. press cancel and don't format it. then follow :http://forum.xda-developers.com/showthread.php?t=2582142
Click to expand...
Click to collapse
with buttons combinations l can not get DL or recovery mode... driver shows LG Phone device in windows device manager...before, the led was flashing red but now is green all the time with LG logo on display...l send it to LG service in my country and they told me my device doesn't comunicate with repair tools..they haven't support for korean version, only europeans models....with windows 8.1 l can use adb commands but can't root the phone to use adb shell(root),so without root no chance to do something....with ubuntu 13.10(use wubi to get dual boot) l can see in terminal serial number but my phone appears to be OFFLINE...so no chance to do something with this method.....there is not support for LG G2 jtag....l'm depressed...3 weeks with no hope

Why haven't you sent it off yet mate?
Sent from my LG-D802 using XDA Premium 4 mobile app

vPro97 said:
Why haven't you sent it off yet mate?
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
when l'm using VRoot app ad ex....this app recognized my device lg g2 f320L , but the software is from F320s..so this avoid warranty...solution is to change the motherboard...but it is 250 fuc''g euros

Can you use adb to push file into /system folder ?
This is the only way to replace your build.prop file to change F320s to F320L

Well I am a bit confused... mostly because this isn't so clear...
When you hold power button it reboots, but if you continue to hold it, it will shut itself down.
It's this way on LG G2 D802 and should be the same on yours.
When it's shut down, hold volume down and then power, when you see the LG Logo release the buttons and hold again volume down and power button. This should get you to recovery...
Try it like this?
I play around with my G2 alot and I have had the LG logo issue several times.
I use PhilZ Touch Recovery and TWRP to backup valuable files.
PhilZ Recovery with AROMA File Manager and if that isn't set up I use TWRP Recovery.
You need a USB OTG connector for this...

cccho said:
Can you use adb to push file into /system folder ?
This is the only way to replace your build.prop file to change F320s to F320L
Click to expand...
Click to collapse
heve to be rooted to do this ...and i can't root it

IrfanCore said:
Well I am a bit confused... mostly because this isn't so clear...
When you hold power button it reboots, but if you continue to hold it, it will shut itself down.
It's this way on LG G2 D802 and should be the same on yours.
When it's shut down, hold volume down and then power, when you see the LG Logo release the buttons and hold again volume down and power button. This should get you to recovery...
Try it like this?
I play around with my G2 alot and I have had the LG logo issue several times.
I use PhilZ Touch Recovery and TWRP to backup valuable files.
PhilZ Recovery with AROMA File Manager and if that isn't set up I use TWRP Recovery.
You need a USB OTG connector for this...
Click to expand...
Click to collapse
no way to go to recovery or DL mode with physical buttons...when l hold down and power after l see LG logo ,my phone shows on display only chinese charaters....with power and volulme up + insert usb my phone shows download mode on display but it's not the really DL mode

manager77 said:
no way to go to recovery or DL mode with physical buttons...when l hold down and power after l see LG logo ,my phone shows on display only chinese charaters....with power and volulme up + insert usb my phone shows download mode on display but it's not the really DL mode
Click to expand...
Click to collapse
Try this for getting to download mode it worked for me:
1.) don't push any buttons, just plug phone into computer using usb cable
2.) push and hold power button + volume up button
3.) do not let go when you see LG logo, continue holding
4.) after a few seconds you should be in download mode

hookinafish said:
Try this for getting to download mode it worked for me:
1.) don't push any buttons, just plug phone into computer using usb cable
2.) push and hold power button + volume up button
3.) do not let go when you see LG logo, continue holding
4.) after a few seconds you should be in download mode
Click to expand...
Click to collapse
no chance to get DL MODE

there should be a way of doing it through linux???
restoring everything back to your phone

Related

[Q] HELP!!!! MY LG L7 P705g can't start

Hi,
one day, I changed the permission of /system/font by accident:
e.g. I changed:
.............read....write.....execute
user.........V........V...........V
group.......V.....................V
others......V.....................V
to
............read.......write......execute
user........V..........V..............
group.......V.........................
others......V.........................
After that, I can't turn on my phone anymore T.T
When I press the power button, the LG logo appears, and then vibrate, logo disappear, after a few seconds the logo comes back and that's it!
It just stays there (I waited for 2 hours and it didn't change,so I turned it off)
Please help~
How can i fix it...
leelulu4fb said:
Hi,
one day, I changed the permission of /system/font by accident:
e.g. I changed:
.............read....write.....execute
user.........V........V...........V
group.......V.....................V
others......V.....................V
to
............read.......write......execute
user........V..........V..............
group.......V.........................
others......V.........................
After that, I can't turn on my phone anymore T.T
When I press the power button, the LG logo appears, and then vibrate, logo disappear, after a few seconds the logo comes back and that's it!
It just stays there (I waited for 2 hours and it didn't change,so I turned it off)
Please help~
How can i fix it...
Click to expand...
Click to collapse
Enter download mode, and flash your firmware like this: http://forum.xda-developers.com/showthread.php?t=2409308 or just open LG Mobile Support Tool and select "Recover Phone". It does the same thing but it's easier.
Nothing's lost, you'll get it fixed.
mircea89fzr said:
Enter download mode, and flash your firmware like this: http://forum.xda-developers.com/showthread.php?t=2409308 or just open LG Mobile Support Tool and select "Recover Phone". It does the same thing but it's easier.
Nothing's lost, you'll get it fixed.
Click to expand...
Click to collapse
hi, thanks a lot.
but what is "version"? There are version 10C/10E/20A in http://lg-phone-firmware.com/index.php?mod=Lg+Optimus+L7&paese=RGS/ROGERS&id_mod=13 ...
How can I know which one is the right one?
leelulu4fb said:
hi, thanks a lot.
but what is "version"? There are version 10C/10E/20A in http://lg-phone-firmware.com/index.php?mod=Lg+Optimus+L7&paese=RGS/ROGERS&id_mod=13 ...
How can I know which one is the right one?
Click to expand...
Click to collapse
My guess is 20A is ICS, 10C is the first release of Gingerbread, and 10E whatever update they did to it. If you're not sure, go with the LG Mob Supp Tool, it's safer and easier.
mircea89fzr said:
Enter download mode, and flash your firmware like this: http://forum.xda-developers.com/showthread.php?t=2409308 or just open LG Mobile Support Tool and select "Recover Phone". It does the same thing but it's easier.
Nothing's lost, you'll get it fixed.
Click to expand...
Click to collapse
one more problem, I can't access to download mode, I press vol+ & power, but nothing happen
leelulu4fb said:
one more problem, I can't access to download mode, I press vol+ & power, but nothing happen
Click to expand...
Click to collapse
Did it work before with the exact firmware update you had? Remove the battery of your phone and re-insert it (don’t turn it on). Press and hold Volume Up button and Volume Down button. While you are pressing the two buttons, press the Power button or insert USB cable (try both if it doesn't work). Or try with: phone off, volume down + insert cable. I don't know the exact combination for your phone.
leelulu4fb said:
one more problem, I can't access to download mode, I press vol+ & power, but nothing happen
Click to expand...
Click to collapse
try vol down+power
when keys light up, touch menu key (vibrates)
Even if you can't go to download mode you'll still be able to use kdz on it. just plug it in and start it. And btw, be careful next time. My Optimus L7 got hard bricked and I needed to go to LG for them to fix it.

[HOW-TO] The easiest way to unbrick your LG G Pad 8.3

1. Download LG Mobile support tool (https://docs.google.com/file/d/0B687GQAEIeHiX0ZSeHp2NlhhalU/edit)
2. Install it as a normal software
3. Once it is successfully installed, run the program
4. Put your tablet into Download Mode (make sure the device is Powered Off and Unplugged, Press and hold Volume Up + Volume Down, then Plug In a USB Cable)
5. Run the LG Mobile Support Tool program
6. Click on "Options -> Upgrade Recovery" on the upright corner
7. It should start downloading stock firmware right away
8. Wait for it ......
9. A flash will be performed right after Once it finishes downloading
10. Wait until the tablet reboots. Done!!!
You may need to do a factory reset If you stuck in a bootloop
-Power off the device
-Press and hold the Power button and Volume down button at the same time
-When the LG logo shows up, let go both of the two buttons for a second, and then press them again
-A Factory reset promote should be shown on the screen. Follow the onscreen instructions to perform a factory reset.
How big is the download from LG server; is this a full system image or just recovery?
wpbear said:
How big is the download from LG server; is this a full system image or just recovery?
Click to expand...
Click to collapse
It's about 1.4gb but you can use the flash tool instead just download the kdz then flash via flash tool
We can use Loki to bypass the bootloader, we just need the dev to port the tool to our device! All that needs to be done is for someone to provide the build number and a copy of the aboot partition to him in this thread: http://forum.xda-developers.com/showthread.php?t=2358871 - will do this once my device has arrived
This worked and brought me back to stock everything. Perfect for me to return to store. Thanks
Thank you very much ! My tablet not boot with the last slimkat build unofficial....
I only see the UK stock Rom in other threads, will this reset a US tab back to the stock Rom?
Hi, thank you for this tutorial.
I made a huge mistake flashing a 4.4.2 Kernel (http://forum.xda-developers.com/showthread.php?t=2617476) on my stock rooted rom (I misunderstood the instruction and thought it was stock-compatible...).
Consequently, my G Pad is not able to boot anymore, even in recovery mode.
After several attempts, I succeed in putting the G Pad in download mode and I followed the procedure described in post #1. During the downloading process, I was surprised that the G Pad "reboots" periodically, by staying in download mode. This didn't bother me until the next recovery step.
Indeed, during the S/W upgrade, this reboot leads to "losts phone connection" error and recovery failure... It seems to append every 2min30s.
Do you have any idea of why it happens or what is it ? Any trick to make the G Pad stay in download mode longer ?
Make sure your device is fully charged and turned off.
Simultaneously press and hold the power and volume down buttons.
When the LG logo shows up, release the power button only.
Now press and hold the power and volume up button while keeping your hold on the volume down button.
When the factory reset screen appears, release your hold on all buttons.
Press the power button to continue.
Press the power button again to confirm if you’re sure you wish to continue with the reset.
For the OP this is the true hard reset button combination!
Thank's for your advice r3stor3 ! :good:
You were right, my G Pad had indeed too low battery to recover, although it has been plugged all day to my laptop. So I charged it all night with the LG charger and tried the recovery process again in the morning (the one in OP #1, not the hard reset), and it worked !
Nonetheless, after recovery, the system display only 1% battery. But that's another story...
Have a nice day !
[Edit : Nevermind, after being fully discharged, it starts to charge again. Everything is fine now.]
I'd like to flash a custom recovery and cm11 on my LG g pad. I'm worried about my warranty. Does this methods would put my tablet back as day one in order to return it if I ever need to?
Envoyé de mon LG-V500 en utilisant Tapatalk
Black screen
I was as a fool to install this:
http://androidforums.com/esteem-all...w-get-out-clockworkmod-recovery-bootloop.html
after a cwm boot loop. Now it is dead, even doesnt start in download mode. Just black.
Its over, isnt it...
Gogolo2 said:
I was as a fool to install this:
http://androidforums.com/esteem-all...w-get-out-clockworkmod-recovery-bootloop.html
after a cwm boot loop. Now it is dead, even doesnt start in download mode. Just black.
Its over, isnt it...
Click to expand...
Click to collapse
Although I didn't try and flash what you did, I wasn't able to put mine into Download mode to recover it either and only received a black screen! Turned out it was just ridiculously low on charge. I knew it was 'working' because with a USB cable in to the PC and holding the power button on the tab it was making connect and disconnect noises. Your best bet is to plug it into the mains charger and hold the power and/or power + vol down (I'm not sure what worked, I did a combination) until you get an LG logo. when you get to that, let it charge fully. (You should see the battery logo on screen)
Shouldn't have a problem once it's fully charged.
jim380 said:
1. Download LG Mobile support tool (https://docs.google.com/file/d/0B687GQAEIeHiX0ZSeHp2NlhhalU/edit)
2. Install it as a normal software
3. Once it is successfully installed, run the program
4. Put your tablet into Download Mode (make sure the device is Powered Off and Unplugged, Press and hold Volume Up + Volume Down, then Plug In a USB Cable)
5. Run the LG Mobile Support Tool program
6. Click on "Options -> Upgrade Recovery" on the upright corner
7. It should start downloading stock firmware right away
8. Wait for it ......
9. A flash will be performed right after Once it finishes downloading
10. Wait until the tablet reboots. Done!!!
You may need to do a factory reset If you stuck in a bootloop
-Power off the device
-Press and hold the Power button and Volume down button at the same time
-When the LG logo shows up, let go both of the two buttons for a second, and then press them again
-A Factory reset promote should be shown on the screen. Follow the onscreen instructions to perform a factory reset.
Click to expand...
Click to collapse
Wow this just saved my life!!!!!!!!!!!!!!!! :good::good::good::good::good:
Life saving!
r3stor3 said:
Make sure your device is fully charged and turned off.
Simultaneously press and hold the power and volume down buttons.
When the LG logo shows up, release the power button only.
Now press and hold the power and volume up button while keeping your hold on the volume down button.
When the factory reset screen appears, release your hold on all buttons.
Press the power button to continue.
Press the power button again to confirm if you’re sure you wish to continue with the reset.
For the OP this is the true hard reset button combination!
Click to expand...
Click to collapse
omg this saved my behind!!!!!!!!!!!!
flashed cm11
got stuck in boot loop
no recovery
no OS
no download mode
did this to factory reset and tada! im in recovery again!!!!
i love you man for posting such clear instructions to get into the hard reset with the hardware keys
hope this helps many
thanks for the info.
Tapatalk を使用して私の One から送信
When I try do the post #1, the message appears: "No upgrade itens to fix".
I try back the system date to december and the program recognize a upgrade, but it stop work.
Any suggestions?
wagneremanuel said:
When I try do the post #1, the message appears: "No upgrade itens to fix".
I try back the system date to december and the program recognize a upgrade, but it stop work.
Any suggestions?
Click to expand...
Click to collapse
Hi I have the same issue.. wondering how to solve it.. thanks
worldbreaker said:
Hi I have the same issue.. wondering how to solve it.. thanks
Click to expand...
Click to collapse
Me three. bricked my G pad and can't do the method outlined in the OP. I get that same error message: No Items To Fix
Please help!
Me too. No Items To Fix.
NYCguy2020 said:
Me three. bricked my G pad and can't do the method outlined in the OP. I get that same error message: No Items To Fix
Please help!
Click to expand...
Click to collapse

[Q] LG G2 (rooted) bricked after OTA update

Hi guys,
i have a G2 D802 rooted with TWRP recovery. My brother did accidentily the OTA update. After that my LG had a bootloop TRWP.
Nothing was working, then suddenly it went black . No Screen, no battery light while charging, no recog from computer, no adb, nothing when i plug it onto the Computer. i searched tons of forums and threads , i used every method, but my phone does not do anything
Several threads are for phones with working ADB or anything working , mine isn't working at all .
What can i do ? i can't bring it to the LG shop because they told me it was rooted and rooted phones have no guarantee in our country.
Please folks does anybody had have the same problem ??
fas2802 said:
Hi guys,
i have a G2 D802 rooted with TWRP recovery. My brother did accidentily the OTA update. After that my LG had a bootloop TRWP.
Nothing was working, then suddenly it went black . No Screen, no battery light while charging, no recog from computer, no adb, nothing when i plug it onto the Computer. i searched tons of forums and threads , i used every method, but my phone does not do anything
Several threads are for phones with working ADB or anything working , mine isn't working at all .
What can i do ? i can't bring it to the LG shop because they told me it was rooted and rooted phones have no guarantee in our country.
Please folks does anybody had have the same problem ??
Click to expand...
Click to collapse
To Get ADB Working try this - http://forum.xda-developers.com/showpost.php?p=48361867&postcount=68
The OP of that thread and one additional (and similar) command found later in the thread fixed up my recovery bootloop.
CxanDroid said:
To Get ADB Working try this - http://forum.xda-developers.com/showpost.php?p=48361867&postcount=68
The OP of that thread and one additional (and similar) command found later in the thread fixed up my recovery bootloop.
Click to expand...
Click to collapse
Just 1 question where can you download "LGE Mobile Sooner Single ADB Interface" and other ADB files for G2? Tnx
battlereactiionz said:
Just 1 question where can you download "LGE Mobile Sooner Single ADB Interface" and other ADB files for G2? Tnx
Click to expand...
Click to collapse
Looks like it's part of the LG mobile driver package.
Good Luck.
TDSJR said:
Looks like it's part of the LG mobile driver package.
Good Luck.
Click to expand...
Click to collapse
hmm, nope i cannot see it in pack
Have you tried to get to power mode? Press Volume Up & and then plug in the usb cable (enter to a download mode). And flash back to stock.
Skickat från min LG-D802 via Tapatalk
Robban said:
Have you tried to get to power mode? Press Volume Up & and then plug in the usb cable (enter to a download mode). And flash back to stock.
Skickat från min LG-D802 via Tapatalk
Click to expand...
Click to collapse
for me it doesnt work at all... i cant acces download mode, twrp so im stuck in LG logo afterwards black screen
battlereactiionz said:
for me it doesnt work at all... i cant acces download mode, twrp so im stuck in LG logo afterwards black screen
Click to expand...
Click to collapse
turn your phone completely off: unplug it from the usb and hold down the power button for like 20sec. the phone should not be turning on or doing anything. then press and hold the power plus volume down. as soon as the lg logo pops up, let go of those 2 buttons and immediately press and hold power + volume down again. this should being up an all white screen with black letters. now press the power button 3 times til you get to "factory resetting". this should boot you into twrp. from there you can do whatever you want. this time do not take the OTA. hehe.
the drivers for your phone will be on lg's g2 site. make sure you've installed those with your phone unplugged from usb. if you have a previous driver installation, uninstall that. the lg drivers have the adb driver inside of it. also make sure you are using the most up to date adb.exe. if not then it may not be able to communicate with your phone. you can get that from android's sdk.
freebee269 said:
turn your phone completely off: unplug it from the usb and hold down the power button for like 20sec. the phone should not be turning on or doing anything. then press and hold the power plus volume down. as soon as the lg logo pops up, let go of those 2 buttons and immediately press and hold power + volume down again. this should being up an all white screen with black letters. now press the power button 3 times til you get to "factory resetting". this should boot you into twrp. from there you can do whatever you want. this time do not take the OTA. hehe.
the drivers for your phone will be on lg's g2 site. make sure you've installed those with your phone unplugged from usb. if you have a previous driver installation, uninstall that. the lg drivers have the adb driver inside of it. also make sure you are using the most up to date adb.exe. if not then it may not be able to communicate with your phone. you can get that from android's sdk.
Click to expand...
Click to collapse
the hard reset writes the same text on the top corner.. i really dont know how to fix the problem i have allready posted a new thread but noone responded ;(
The fact that you see anything, is a good thing. Let battery completely die, and then plug into USB while booting to download mode. I had VERY similar issue and that's worked for me, then flashed to stock.
Sent from my g2 using xda app-developers app
With your phone on, and in recovery (twrp), plug it into your computer.
Open device manager.
Look for a disabled/uninstalled (marked with yellow) device that corresponds to tour device (in my case all it said was D800).
Choose properties/driver/update driver.
From here, you have to choose all the manual options ("let me choose the driver to install"), not automatic, .
Finally Windows should show you a list of device drivers compatible with your device.
choose the LGE (or androidnet) Single Sooner ADB ...
Let it install
Test your ADB interface (ADB Devices).
TDSJR said:
The fact that you see anything, is a good thing. Let battery completely die, and then plug into USB while booting to download mode. I had VERY similar issue and that's worked for me, then flashed to stock.
Sent from my g2 using xda app-developers app
Click to expand...
Click to collapse
Do you think it will solve the problem? the only thing i need to do is to boot it in android.. i think the twrp img. was corrupted and becouse of that it doesnt work..
---------- Post added at 04:32 PM ---------- Previous post was at 04:14 PM ----------
CxanDroid said:
With your phone on, and in recovery (twrp), plug it into your computer.
Open device manager.
Look for a disabled/uninstalled (marked with yellow) device that corresponds to tour device (in my case all it said was D800).
Choose properties/driver/update driver.
From here, you have to choose all the manual options ("let me choose the driver to install"), not automatic, .
Finally Windows should show you a list of device drivers compatible with your device.
choose the LGE (or androidnet) Single Sooner ADB ...
Let it install
Test your ADB interface (ADB Devices).
Click to expand...
Click to collapse
i cannot access the twrp
battlereactiionz said:
Do you think it will solve the problem? the only thing i need to do is to boot it in android.. i think the twrp img. was corrupted and becouse of that it doesnt work..
Click to expand...
Click to collapse
Sounds identical to the problem I had. It's like a REAL slow bootloop. If you catch it just right, can you get it to factory reset? And then from there, it just does the same thing?
Ooops.
I saw bootloop twrp.
I missed the black screen.
What do you get when you hold the power button for longer than 15 seconds (force shutdown), then power it back on (hold power for a few seconds, then release)?
If you have a fully non-booting device, warranty it, of course blame it on the update.
CxanDroid said:
Ooops.
I saw bootloop twrp.
I missed the black screen.
What do you get when you hold the power button for longer than 15 seconds (force shutdown), then power it back on (hold power for a few seconds, then release)?
If you have a fully non-booting device, warranty it, of course blame it on the update.
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=fNQd4SR69-c this is what happens... if i wont be able to fix it i will have to take it to lg servis, but it will take long.
battlereactiionz said:
http://www.youtube.com/watch?v=fNQd4SR69-c this is what happens... if i wont be able to fix it i will have to take it to lg servis, but it will take long.
Click to expand...
Click to collapse
turn the phone completely off. unplug it from the usb/charger. while the phone is off, hold down volume up then plug in the usb/charger. you should automatically see download mode pop up. if that happens then you can return back to stock by googling howto's. if not then you will have to take it in.
no devices when you plug it into computer in that state?
Hopefully none of that text at the top of the screen mentions root or modified system.
freebee269 said:
turn the phone completely off. unplug it from the usb/charger. while the phone is off, hold down volume up then plug in the usb/charger. you should automatically see download mode pop up. if that happens then you can return back to stock by googling howto's. if not then you will have to take it in.
Click to expand...
Click to collapse
nope it didnt work.. same thing again
battlereactiionz said:
nope it didnt work.. same thing again
Click to expand...
Click to collapse
well now you know what you have to do. sorry about the bad news.
Had thesame problem
Sent from my HTCSensation using xda app-developers app

LG G2 D802 on bootloop without TWRP or download mode

Hello i would like to ask you regarding to a serious problem that i have on my g2 device.(d802 international version).
I tried to flash latest TWRP version which was bummed.
Then the cloudy g3 rom and a kernel of dorimax.
Now my phone is always on bootloop and it doesn't let me open TWRP with combination keys or enter to Download mode.
Every time i connect it to to pc via usb cable, device manager recognize it as LGE MTP device.
Do you have any suggestions , please ?
try this http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
amin44 said:
try this http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Click to expand...
Click to collapse
ill try it asap! thank you!
intrial2015 said:
Hello i would like to ask you regarding to a serious problem that i have on my g2 device.(d802 international version).
I tried to flash latest TWRP version which was bummed.
Then the cloudy g3 rom and a kernel of dorimax.
Now my phone is always on bootloop and it doesn't let me open TWRP with combination keys or enter to Download mode.
Every time i connect it to to pc via usb cable, device manager recognize it as LGE MTP device.
Do you have any suggestions , please ?
Click to expand...
Click to collapse
Any suggestions????
intrial2015 said:
Any suggestions????
Click to expand...
Click to collapse
Did you try to force your phone into qhsusb_bulk mode and flash the partitions?
Sent from my LG-D800 using Tapatalk
If it is still recognized as MTP device it is too early to disassemble it.
Are you sure you cannot go into download mode? (Shutdown completely with 10 sec. on POWER, hold VOLUME+ and then plug in PC USB).
Did you try to find it with adb? ("adb devices" ...)
Did you try to use the SRKTool by droith? It can fix some problems the easy way.
As suggested did you try to force it into QHSUSB_bulk mode?
Keep calm. It is nearly impossible to destroy this phone.
MB525 said:
If it is still recognized as MTP device it is too early to disassemble it.
Are you sure you cannot go into download mode? (Shutdown completely with 10 sec. on POWER, hold VOLUME+ and then plug in PC USB).
Did you try to find it with adb? ("adb devices" ...)
Did you try to use the SRKTool by droith? It can fix some problems the easy way.
As suggested did you try to force it into QHSUSB_bulk mode?
Keep calm. It is nearly impossible to destroy this phone.
Click to expand...
Click to collapse
i try all those suggetions exept from force it into QHSUSB_bulk mode cause i cant open the back cover without tools!
Have you tried the different key combos to enter your recovery?
1. volume down + power, if you see LG logo, release and press again volume down + power
2. volume down + power, if you see LG logo, release and press volume up + volume down
Sometimes you have to try a cople of times (it's about timing).
There are different modes.
You don't think you need to open your phone for the QHSUSB_bulk flash mode 9006. It's a mode in where all your phone's partitions are mounted in Windows (or Linux) in "download" mode. With the right partitions nuked you should automatically get into this mode. I got there accidentially twice.
Did you try the SRKTool? For example, did you try to enter download mode from there or otherwise nuke and fix the download mode?
Read these guides...
http://forum.xda-developers.com/android/general/unbrick-lg-model-download-recovery-t3060184
http://forum.xda-developers.com/showthread.php?t=2582142
bravho said:
Have you tried the different key combos to enter your recovery?
1. volume down + power, if you see LG logo, release and press again volume down + power
2. volume down + power, if you see LG logo, release and press volume up + volume down
Sometimes you have to try a cople of times (it's about timing).
Click to expand...
Click to collapse
yes i try all of them but nothing!.........

stuck on boot secure and download mode

i have a lg spirit H440F
I might have delete some files in the root folder , result is a blank screen
I cannot enter the phone
It s possible to see the download mode when i push volume
factory reset doesnt work
What can i do ? or is the phone dead?
thanks a lot
papilonaa said:
i have a lg spirit H440F
I might have delete some files in the root folder , result is a blank screen
I cannot enter the phone
It s possible to see the download mode when i push volume
factory reset doesnt work
What can i do ? or is the phone dead?
thanks a lot
Click to expand...
Click to collapse
Turn off the phone. Plug the PC end of the USB cable in the PC. Press and hold volume up and plug in the USB cable in the phone. Hold it like that. After a couple of seconds, you should be in download mode. Then use LG Flashtool/LGUP to flash Lolipop/Marshmallow.
now stuck on logo
Fobos531 said:
Turn off the phone. Plug the PC end of the USB cable in the PC. Press and hold volume up and plug in the USB cable in the phone. Hold it like that. After a couple of seconds, you should be in download mode. Then use LG Flashtool/LGUP to flash Lolipop/Marshmallow.
Click to expand...
Click to collapse
Helo thanks a lot to you for helping me
since that day i could le't the LG recognize on the xp and flash it with the usual tool.
Now after the process finished, i reboot and it stay stuck on the logo, some time come for a second the green android who say erasing process, then again the logo
That s it
please what next can i try?
thanks
papilonaa said:
Helo thanks a lot to you for helping me
since that day i could le't the LG recognize on the xp and flash it with the usual tool.
Now after the process finished, i reboot and it stay stuck on the logo, some time come for a second the green android who say erasing process, then again the logo
That s it
please what next can i try?
thanks
Click to expand...
Click to collapse
what frimware did you flash? can you try performing a factory reset? to do so:
1) turn off the phone
2) press and hold volume down + power keys until the lg logo appears
3) let go of the both keys for 1 second
4) immediately press and hold them again (both keys) until you get to a factory reset screen. Follow the onscreen instrucitons.
Fobos531 said:
what frimware did you flash? can you try performing a factory reset? to do so:
1) turn off the phone
2) press and hold volume down + power keys until the lg logo appears
3) let go of the both keys for 1 second
4) immediately press and hold them again (both keys) until you get to a factory reset screen. Follow the onscreen instrucitons.
Click to expand...
Click to collapse
Thanks a lot
i could factory reset, but after many try , i got to download mode, and i could flash ... i had realy to use the country rom, where i bought the phone, in my case , it work only whith the Colombien one....none other works, Now shall i try to flash with a cyanogène or a mui? would it works?
papilonaa said:
Thanks a lot
i could factory reset, but after many try , i got to download mode, and i could flash ... i had realy to use the country rom, where i bought the phone, in my case , it work only whith the Colombien one....none other works, Now shall i try to flash with a cyanogène or a mui? would it works?
Click to expand...
Click to collapse
There's no custom roms for Qualcomm Spirit. At least not yet.

Categories

Resources