Database Users

[Q] no emergency mode; no recovery mode; no PC Suite

Hi guys.
My phone after installing a rom, maybe corrupted, does not enter into emergency mode or recovery mode or PC Suite USB mode.
There is some more method install another rom?
(my phone is a LG optimus L7)
continuation of a good job guys

Can the pone enter CWM? Try change vol button (if earlier entered by pressing vol+ now try vol- and home and power button until vibrate)

raul338 said:
Can the pone enter CWM? Try change vol button (if earlier entered by pressing vol+ now try vol- and home and power button until vibrate)
Click to expand...
Click to collapse
Yes, already tried with phone but the phone restarts and appears black screen and back to normal start. I've tried all the buttons and sequences but does not work any.

kadekz said:
Yes, already tried with phone but the phone restarts and appears black screen and back to normal start. I've tried all the buttons and sequences but does not work any.
Click to expand...
Click to collapse
Then search for a downgrade kdz here in the forums

raul338 said:
Then search for a downgrade kdz here in the forums
Click to expand...
Click to collapse
Already tried that but I get to the step "USB Connection Type" and I can not abide the "Software for LG usb" :s

kadekz said:
Already tried that but I get to the step "USB Connection Type" and I can not abide the "Software for LG usb" :s
Click to expand...
Click to collapse
You don't need that for a kdz with reset all data... Whats the link for the tutorial that you are following?

raul338 said:
You don't need that for a kdz with reset all data... Whats the link for the tutorial that you are following?
Click to expand...
Click to collapse
I do not follow any tutorial, i'm already used to change the rom through cwm, wipes, install zip from SD through and wipes again.
But now not open the cwm, is black screen and reboots to normal mode. I do not understand what is happening. :x

kadekz said:
I do not follow any tutorial, i'm already used to change the rom through cwm, wipes, install zip from SD through and wipes again.
But now not open the cwm, is black screen and reboots to normal mode. I do not understand what is happening. :x
Click to expand...
Click to collapse
I dont now if this help, but only way that works for me to get into recovery, is holding both, vol+ and vol- keys, while presing home, and power button, when the phone vibrates, release power button, but keep holding vol+, vol- and home button for about 2 seconds, then release everything....
phone should boot into recovery now...
here's a guide for flashing original firmware. http://forum.xda-developers.com/showpost.php?p=31828740&postcount=1191
lots, and i mean, lots of information is on this post http://forum.xda-developers.com/showthread.php?t=1664322.
good luck

vashminted said:
I dont now if this help, but only way that works for me to get into recovery, is holding both, vol+ and vol- keys, while presing home, and power button, when the phone vibrates, release power button, but keep holding vol+, vol- and home button for about 2 seconds, then release everything....
phone should boot into recovery now...
here's a guide for flashing original firmware. http://forum.xda-developers.com/showpost.php?p=31828740&postcount=1191
lots, and i mean, lots of information is on this post http://forum.xda-developers.com/showthread.php?t=1664322.
good luck
Click to expand...
Click to collapse
yes, I also used this combination of keys to enter the recovery once but now does not work, call a black screen and does not vibrate.
By KDZ also can not do anything because they also do not enter the emergency mode or in "pc suite".
Not even know how to solve this problem: x
And the worst is that I need the smartphone

kadekz said:
yes, I also used this combination of keys to enter the recovery once but now does not work, call a black screen and does not vibrate.
By KDZ also can not do anything because they also do not enter the emergency mode or in "pc suite".
Not even know how to solve this problem: x
And the worst is that I need the smartphone
Click to expand...
Click to collapse
How do you enter in emergency mode?
I do it by taking the battery off, then conect the cable to phone, hold vol+ (or vol-, i dont remember) and then conect the cable to the pc

vashminted said:
How do you enter in emergency mode?
I do it by taking the battery off, then conect the cable to phone, hold vol+ (or vol-, i dont remember) and then conect the cable to the pc
Click to expand...
Click to collapse
That is the problem, not enter the emergency mode. : s
Already tried it, until with two combinations of keys but does not work, do not understand: (

I'm having the same exact problem. Early in mornign I flashed a rom with cwm and didnt like it at all. Then I flash the homer v20 with KDZ and now it does not boot, neither the emergency mode works as I install it with that mode.

dude ..remove the battery then press vol down with home and power ..all together until emergency or download mode comes ..if doesnt tri volume up ..if it doesnt then try this ...press volume down with home and power ..the front lights will light for 2 seconds ..just remove finger from home button and still on powe with vol down ..i wish i help you i faced this in my l5 and i think they are the same

hassan216 said:
dude ..remove the battery then press vol down with home and power ..all together until emergency or download mode comes ..if doesnt tri volume up ..if it doesnt then try this ...press volume down with home and power ..the front lights will light for 2 seconds ..just remove finger from home button and still on powe with vol down ..i wish i help you i faced this in my l5 and i think they are the same
Click to expand...
Click to collapse
I already tried all the possible combinations of keys to wake up the smartphone but it does not work neither. That's the bigger problem: (
But thanks anyway for the tip.

there is no solution exists?

Final solution is emergency or download mode. if u can not enter it, u shoud take it to service center as soon as possible

[Q] Bricked lgp700 after flashing cm 11.0

Hello,
I am very new to rooting etc. I rooted my phone a few days ago, unlocked bootloader and tried to flash cm11.0 with rom manager (cwmg) following this link:
http://forum.xda-developers.com/showthread.php?t=2521239
Unfortunately I didn´t understand the instructions well, so after wiping caches, instead of doing a full format I did a user data etc format (which i now think was a factory reset). Tried flashing, didn´t succeed.
Anyway, when I try to switch it on I only get the lg logo and then the batery charging thingy When I try to go to recovery mode with volume up power and menu button, my phone goes on a loop of lg and cyanomod logos untill infinity ( Have to take off the battery). Tried to use heimdall (as i have a mac) to flash kdz back to it, but phone was not recognized. On my pc tried the same, but again phone not seen. I can see it on my computer as an unrecognized external usb but cannot explore. Any ideas on what to do??
thanks in advance

franky.frangi said:
Hello,
I am very new to rooting etc. I rooted my phone a few days ago, unlocked bootloader and tried to flash cm11.0 with rom manager (cwmg) following this link:
http://forum.xda-developers.com/showthread.php?t=2521239
Unfortunately I didn´t understand the instructions well, so after wiping caches, instead of doing a full format I did a user data etc format (which i now think was a factory reset). Tried flashing, didn´t succeed.
Anyway, when I try to switch it on I only get the lg logo and then the batery charging thingy When I try to go to recovery mode with volume up power and menu button, my phone goes on a loop of lg and cyanomod logos untill infinity ( Have to take off the battery). Tried to use heimdall (as i have a mac) to flash kdz back to it, but phone was not recognized. On my pc tried the same, but again phone not seen. I can see it on my computer as an unrecognized external usb but cannot explore. Any ideas on what to do??
thanks in advance
Click to expand...
Click to collapse
power off your device.
long press
1) "vol -"
2) home button
3) power button
for some second
are you able to enter in recovery?

lferlito said:
power off your device.
long press
1) "vol -"
2) home button
3) power button
for some second
are you able to enter in recovery?
Click to expand...
Click to collapse
No, it goes into logos loop.

franky.frangi said:
No, it goes into logos loop.
Click to expand...
Click to collapse
i don't know, man
but for the future, before installing a custom rom
remember to install a recovery
it's very important
hope someone better than me will help you
:fingers-crossed:

lferlito said:
i don't know, man
but for the future, before installing a custom rom
remember to install a recovery
it's very important
hope someone better than me will help you
:fingers-crossed:
Click to expand...
Click to collapse
But I did, throught clockworkmod (first thing I did) ....and also did a nandroid backup...just don´t know how to access them...

franky.frangi said:
But I did, throught clockworkmod (first thing I did) ....and also did a nandroid backup...just don´t know how to access them...
Click to expand...
Click to collapse
on my L5, i long press those 3 buttons until LG logo boot appears..
i wait some second and it appears the CWM reco
i don't know if there are other ways to enter in recovery mode..

yeah me neither.mine used to do the same before the flashing.thanks thought.lets see if someone has another idea...

franky.frangi said:
yeah me neither.mine used to do the same before the flashing.thanks thought.lets see if someone has another idea...
Click to expand...
Click to collapse
As soon as you plug your USB into your phone, hold down the volume up (+) button and the power button and release them after holding them down for about 2 to 3 seconds. Then, install the USB driver for your phone with the LG Mobile Support Tool. Secondly, download and install the LG PC Suite program and last but not least, download the KDZ program. Install the correct firmware for your phone and make sure you select 'EMERGENCY' from the list on the top right of the KDZ program. Select your downloaded firmware file and start the program. If everything worked out, the program should crash after it's done and your phone should reboot. Disconnect your phone from the computer if it doesn't reboot and try to boot it up again.
You can find all of these programs along with tutorials on how they work by searching on either XDA or Google.

did forcing recovery/download work ?
TahaX said:
As soon as you plug your USB into your phone, hold down the volume up (+) button and the power button and release them after holding them down for about 2 to 3 seconds. Then, install the USB driver for your phone with the LG Mobile Support Tool. Secondly, download and install the LG PC Suite program and last but not least, download the KDZ program. Install the correct firmware for your phone and make sure you select 'EMERGENCY' from the list on the top right of the KDZ program. Select your downloaded firmware file and start the program. If everything worked out, the program should crash after it's done and your phone should reboot. Disconnect your phone from the computer if it doesn't reboot and try to boot it up again.
You can find all of these programs along with tutorials on how they work by searching on either XDA or Google.
Click to expand...
Click to collapse
the phone off usb in and buttons did it work ?

Actually didn´t work,I have drivers already, LG PC Suite program , and KDZ. Problem is my phone is not detected by pc, so kdz unzips and then says : phone not detected, with or without battery...doesn´t go into recovery mode with buttons, just lg and cyanomod logos...
I don`t know if this can b fixed.....How can you flash anything if it´s not detected....
I´ll give it a try again tomorrow, without trying to enter recovery mode....but tried lots of buttons combinations and wasn´t working

Press these buttons
volume +
,volume -
home button
together with the power button
release all buttons except power button when you get a vibration
release the power button immediately after the lg logo has appered
this should let you get in the recovery menu
FULL STEP BY STEP GUIDE
found http://forum.xda-developers.com/showthread.php?t=2486512

IGGYVIP said:
Press these buttons
volume +
,volume -
home button
together with the power button
release all buttons except power button when you get a vibration
release the power button immediately after the lg logo has appered
this should let you get in the recovery menu
FULL STEP BY STEP GUIDE
found http://forum.xda-developers.com/showthread.php?t=2486512
Click to expand...
Click to collapse
Finally!! This worked....I can get in the recovery menu!!!
Before I do anything I´ll really think about what rom I want to use )
Thanks lot everyone...hope it gives me no more issues.

franky.frangi said:
Finally!! This worked....I can get in the recovery menu!!!
Before I do anything I´ll really think about what rom I want to use )
Thanks lot everyone...hope it gives me no more issues.
Click to expand...
Click to collapse
happy flashing

Haven't seen this before..

Hi guys,
I recently installed Simple ROM (Stock Android 5) for my G2 D802 however, I've found a need to downgrade back to 4.4.2. I went to flash a stock rooted 'H' version of the ROM which i've used before however during the flash, I got the error 'error executing updater binary' during the process.
After searching on google, it seems that I needed a newer version of TWRP (I had to change to a 'bumped' version to install the Simple ROM).
Having flashed 2.8.4 of TWRP, I rebooted the device however I now have the following issues:
- The device boots, shows the LG logo and the LED flashes
- The device never finishes it's boot
- I can not access recovery mode using the key combinations required
- The device doesn't seem to turn 'off'. When I press and hold the power button, the screen goes blank (though, still on) and then shows the LG logo again
I suspect, that because I cannot turn it off, I cannot boot to recovery.
Any thoughts on a quickfix?
EDIT: - It seems that I CAN turn the device off by holding vol UP, DOWN and POWER for a few seconds. I can get into download mode this way..

adaimespechip said:
Hi guys,
I recently installed Simple ROM (Stock Android 5) for my G2 D802 however, I've found a need to downgrade back to 4.4.2. I went to flash a stock rooted 'H' version of the ROM which i've used before however during the flash, I got the error 'error executing updater binary' during the process.
After searching on google, it seems that I needed a newer version of TWRP (I had to change to a 'bumped' version to install the Simple ROM).
Having flashed 2.8.4 of TWRP, I rebooted the device however I now have the following issues:
- The device boots, shows the LG logo and the LED flashes
- The device never finishes it's boot
- I can not access recovery mode using the key combinations required
- The device doesn't seem to turn 'off'. When I press and hold the power button, the screen goes blank (though, still on) and then shows the LG logo again
I suspect, that because I cannot turn it off, I cannot boot to recovery.
Any thoughts on a quickfix?
EDIT: - It seems that I CAN turn the device off by holding vol UP, DOWN and POWER for a few seconds. I can get into download mode this way..
Click to expand...
Click to collapse
Make sure you're trying both combinations possible for recovery, PWR + VOL DWN > PWR + VOL DWN method as well as the PWR + VOL DWN > VOL DWN + VOL UP method. You may be on a different recovery then what you think (happened to me once). The fact you can enter download mode is great however, worst case you can always return to stock.

d00lz said:
Make sure you're trying both combinations possible for recovery, PWR + VOL DWN > PWR + VOL DWN method as well as the PWR + VOL DWN > VOL DWN + VOL UP method. You may be on a different recovery then what you think (happened to me once). The fact you can enter download mode is great however, worst case you can always return to stock.
Click to expand...
Click to collapse
Thanks for this. I've tried recovery both ways, and neither work unfortunately. I'm going to plug it into PC Suite and see if that picks anything up, failing that i'll grab a kdz. :/

adaimespechip said:
Thanks for this. I've tried recovery both ways, and neither work unfortunately. I'm going to plug it into PC Suite and see if that picks anything up, failing that i'll grab a kdz. :/
Click to expand...
Click to collapse
Okay good luck. Make sure you grab your kdz file from a site like http://www.lg-firmware-rom.com using your IMEI.

d00lz said:
Okay good luck. Make sure you grab your kdz file from a site like http://www.lg-firmware-rom.com using your IMEI.
Click to expand...
Click to collapse
Not going so well.. Installed everything on my Windows machine but it doesn't seek to pick up the device in download mode.
If I select 'Read phone information' on the Flash tool, it stops responding and I end up needing to close it. Also, in the Flash tool, what should I select under 'select type' - it defaults to CDMA..
I can skip the 'read phone info' bug and just hit START which then loads the 'select country and language' view, then the LG Mobile Support which doesnt pick up the device.
help?

adaimespechip said:
Not going so well.. Installed everything on my Windows machine but it doesn't seek to pick up the device in download mode.
If I select 'Read phone information' on the Flash tool, it stops responding and I end up needing to close it. Also, in the Flash tool, what should I select under 'select type' - it defaults to CDMA..
I can skip the 'read phone info' bug and just hit START which then loads the 'select country and language' view, then the LG Mobile Support which doesnt pick up the device.
help?
Click to expand...
Click to collapse
Have you installed the LG Drivers? Link
If you have, when your phone is connected open device manager on your PC and see if you can spot your android device, or anything that represents your device.
Everything you need to select is in that thread I Iinked you too.
You dont need to change anything within the tool, keep cdma selected and just make the language english, you can keep the country on korea it doesnt matter.

d00lz said:
Have you installed the LG Drivers? Link
If you have, when your phone is connected open device manager on your PC and see if you can spot your android device, or anything that represents your device.
Everything you need to select is in that thread I Iinked you too.
You dont need to change anything within the tool, keep cdma selected and just make the language english, you can keep the country on korea it doesnt matter.
Click to expand...
Click to collapse
Yup AFAIK everything is installed. The device was picked up by the machine as it did ask me install more drivers.
The main issue seems to be sat with the LG mobile support tool. It continuously fails due to an error and nothing progresses on the device itself.
The only thing i've noticed is that the bottom of the device screen, shows 'B18' and 'Rooted'. The B# keeps increasing, though?

adaimespechip said:
Yup AFAIK everything is installed. The device was picked up by the machine as it did ask me install more drivers.
The main issue seems to be sat with the LG mobile support tool. It continuously fails due to an error and nothing progresses on the device itself.
The only thing i've noticed is that the bottom of the device screen, shows 'B18' and 'Rooted'. The B# keeps increasing, though?
Click to expand...
Click to collapse
The B is just your current battery percentage. It will increase as it gathers charge from the USB connectivity, nothing to worry about.
As for why there's no communication between the software and your phone, I can't explain that but it's obviously looking like a driver problem. Try opening the LG Flash Tool log file found in C:\LGMobileUpgrade\log.txt.
Copy and paste the entire log onto pastebin and I'll have a look at it for you.

d00lz said:
The B is just your current battery percentage. It will increase as it gathers charge from the USB connectivity, nothing to worry about.
As for why there's no communication between the software and your phone, I can't explain that but it's obviously looking like a driver problem. Try opening the LG Flash Tool log file found in C:\LGMobileUpgrade\log.txt.
Copy and paste the entire log onto pastebin and I'll have a look at it for you.
Click to expand...
Click to collapse
Ah good. Thanks!
See below - There were 2 log files, this is the most recent..
http://pastebin.com/JRBmQ1q6
EDIT: further to this, i've looked at the LG mobile support tool on it's own.. That seems to get a lot further than when it's called upon from the update tool. However the battery is now too low.

adaimespechip said:
Ah good. Thanks!
See below - There were 2 log files, this is the most recent..
http://pastebin.com/JRBmQ1q6
Click to expand...
Click to collapse
May I suggest putting your kdz file in the LG Flash Tool folder.
Also does the LG Flash Tool stay at 0% or does it increase before failing? May I also suggest trying this on other Operating Systems if at all possible.

d00lz said:
May I suggest putting your kdz file in the LG Flash Tool folder.
Also does the LG Flash Tool stay at 0% or does it increase before failing? May I also suggest trying this on other Operating Systems if at all possible.
Click to expand...
Click to collapse
I'll give that a go in a moment.
The Flash tool increases several times before failing. Is there a Mac version of the flash tool?

adaimespechip said:
I'll give that a go in a moment.
The Flash tool increases several times before failing. Is there a Mac version of the flash tool?
Click to expand...
Click to collapse
Not that I'm aware of. Have you tried a hard reset?
Take your phone and turn it off.
Wait while your device is shutting down.
Then, press volume down button and power button together until the LG logo appears on the screen.
When the LG logo is displayed, let go of the power button, keep pressing the volume down key and then press once more the power button.
Once you do that, on your LG G2 the factory reset menu will be displayed.
Press power button in order to agree and wait while the hard reset is being completed.

d00lz said:
Not that I'm aware of. Have you tried a hard reset?
Take your phone and turn it off.
Wait while your device is shutting down.
Then, press volume down button and power button together until the LG logo appears on the screen.
When the LG logo is displayed, let go of the power button, keep pressing the volume down key and then press once more the power button.
Once you do that, on your LG G2 the factory reset menu will be displayed.
Press power button in order to agree and wait while the hard reset is being completed.
Click to expand...
Click to collapse
That requires booting into the recovery though right? I can't get to that point. So yes, i've tried that but the LG logo just shows, and does not get to the reset or recovery screens.
The device just sits at the LG logo screen with the LED pulsing and changing colours.

adaimespechip said:
That requires booting into the recovery though right? I can't get to that point. So yes, i've tried that but the LG logo just shows, and does not get to the reset or recovery screens.
The device just sits at the LG logo screen with the LED pulsing and changing colours.
Click to expand...
Click to collapse
No, you could just do it while the phones turned off.
Instructions to do a Master Reset with Hardware Keys can be found here.
The only other option I can give you is attempting the old manual kdz method found here, sorry .

All fixed - first time.. Issue was down to a crappy Windows machine at the office.. Thanks for your help.

LG G2 Boot security error after trying to flash SuperSu after going to LineageOS 14.1

I've been using Cyanogenmod 13.1 (rooted) and I decided to flash a ROM with Nougat. I flashed lineage-14.1-20170320-nightly-d802-signed and open_gapps-arm-7.1-mini-20170325 and everything worked fine except I didn't have SuperSU. I tried flashing SuperSU-v2.79-201612051815 and when I tried to boot into system I got this screen (with the LG logo below) http://i.imgur.com/O7vOtab.png I tried many methods like this https://forum.xda-developers.com/showthread.php?t=2582142 and this https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404 to no avail. In Linux when I used the ls /dev/sd* command in the terminal the phone wouldn't show up and later in Windows I got the PC to recognize the phone as Marshall USB Composite Device 9006 http://i.imgur.com/a5WHV9P.png and in Disk Management the phone partition shows up un-initialised http://i.imgur.com/XaVKIu7.png . Help I don't know what to do now. Tell me if I should provide more information.

I had the exact same problem. Then i found a solution. Just dont flash the normal Supersu, you need to flash the Supersu BUMPED file. Just go in recovery, press 10 sec the power button to be sure the phone is off, then hold volume down and power button until the logo appears, then release and press again (fast) then choose yes, yes. Just flash the Bumped and if recovery asks to do root choose NO.
The Bumped which worked for me
http://www108.zippyshare.com/v/ZjxTLdkp/file.html
I hope i could help

RelaxBuddy said:
I had the exact same problem. Then i found a solution. Just dont flash the normal Supersu, you need to flash the Supersu BUMPED file. Just go in recovery, press 10 sec the power button to be sure the phone is off, then hold volume down and power button until the logo appears, then release and press again (fast) then choose yes, yes. Just flash the Bumped and if recovery asks to do root choose NO.
The Bumped which worked for me
I hope i could help
Click to expand...
Click to collapse
Well I had no luck getting into recovery before but that was before I took apart my phone because I couldn't turn it off (it keeped bootlooping) but I will try, thanks

Bluellama said:
Well I had no luck getting into recovery before but that was before I took apart my phone because I couldn't turn it off (it keeped bootlooping) but I will try, thanks
Click to expand...
Click to collapse
Yeah Bad same Problem, turned off and it went on, then again bootloop. But if you press the power button long enough then its completely off. In cyanogen mod i had Problem that i couldnt get into recovery with power button+volume down.
So you should flash kdz, get oneclickroot for LG g2, then autorec lollipop to get recovery. Then flash Rom + gapps + The bumped file.
If you dont know how to flash kdz, you can ask here. I will help
Good luck

RelaxBuddy said:
Yeah Bad same Problem, turned off and it went on, then again bootloop. But if you press the power button long enough then its completely off. In cyanogen mod i had Problem that i couldnt get into recovery with power button+volume down.
So you should flash kdz, get oneclickroot for LG g2, then autorec lollipop to get recovery. Then flash Rom + gapps + The bumped file.
If you dont know how to flash kdz, you can ask here. I will help
Good luck
Click to expand...
Click to collapse
Previously I couldn't go into download mode but I will try now since I managed to turn off the smartphone completely. Before it would just stay on with a black screen.

Bluellama said:
Previously I couldn't go into download mode but I will try now since I managed to turn off the smartphone completely. Before it would just stay on with a black screen.
Click to expand...
Click to collapse
Yeah Ok. When I wanted to turn It off, I just pressed the power button until the screen went black and the logo came again but after 2-3 sec the screen went black again, then it was off (just hold power button for 10sec)
Try that when your phone keeps restarting

RelaxBuddy said:
Yeah Ok. When I wanted to turn It off, I just pressed the power button until the screen went black and the logo came again but after 2-3 sec the screen went black again, then it was off (just hold power button for 10sec)
Try that when your phone keeps restarting
Click to expand...
Click to collapse
KDZ flashing gets stuck at 60% (Verifying phone connection) http://i.imgur.com/AAHKqcd.png
Should I just let it sit through its emotional problems?

Bluellama said:
KDZ flashing gets stuck at 60% (Verifying phone connection) http://i.imgur.com/AAHKqcd.png
Should I just let it sit through its emotional problems?
Click to expand...
Click to collapse
Get the lg mobile support tool, install it. Then open and connect your phone via download mode, it will find the phone and download the kdz for it. That should work.
If it doesn't install automatically, click on additional options then click on set upgrade error back, or something like that.
Before all that install the driver from
http://www.lg.com/de/support/service-mobil-telefon/lg-G2
Then you can start with lg mobile support tool

RelaxBuddy said:
Get the lg mobile support tool, install it. Then open and connect your phone via download mode, it will find the phone and download the kdz for it. That should work.
If it doesn't install automatically, click on additional options then click on set upgrade error back, or something like that.
Before all that install the driver from
http://www.lg.com/de/support/service-mobil-telefon/lg-G2
Then you can start with lg mobile support tool
Click to expand...
Click to collapse
Ok I managed to flash a stock rom and the problem was... usb 3.0. I connected the phone to usb 2 and it worked flawlessly. If anybody has a problem like I did you can message me

stuck on boot secure and download mode

i have a lg spirit H440F
I might have delete some files in the root folder , result is a blank screen
I cannot enter the phone
It s possible to see the download mode when i push volume
factory reset doesnt work
What can i do ? or is the phone dead?
thanks a lot

papilonaa said:
i have a lg spirit H440F
I might have delete some files in the root folder , result is a blank screen
I cannot enter the phone
It s possible to see the download mode when i push volume
factory reset doesnt work
What can i do ? or is the phone dead?
thanks a lot
Click to expand...
Click to collapse
Turn off the phone. Plug the PC end of the USB cable in the PC. Press and hold volume up and plug in the USB cable in the phone. Hold it like that. After a couple of seconds, you should be in download mode. Then use LG Flashtool/LGUP to flash Lolipop/Marshmallow.

now stuck on logo
Fobos531 said:
Turn off the phone. Plug the PC end of the USB cable in the PC. Press and hold volume up and plug in the USB cable in the phone. Hold it like that. After a couple of seconds, you should be in download mode. Then use LG Flashtool/LGUP to flash Lolipop/Marshmallow.
Click to expand...
Click to collapse
Helo thanks a lot to you for helping me
since that day i could le't the LG recognize on the xp and flash it with the usual tool.
Now after the process finished, i reboot and it stay stuck on the logo, some time come for a second the green android who say erasing process, then again the logo
That s it
please what next can i try?
thanks

papilonaa said:
Helo thanks a lot to you for helping me
since that day i could le't the LG recognize on the xp and flash it with the usual tool.
Now after the process finished, i reboot and it stay stuck on the logo, some time come for a second the green android who say erasing process, then again the logo
That s it
please what next can i try?
thanks
Click to expand...
Click to collapse
what frimware did you flash? can you try performing a factory reset? to do so:
1) turn off the phone
2) press and hold volume down + power keys until the lg logo appears
3) let go of the both keys for 1 second
4) immediately press and hold them again (both keys) until you get to a factory reset screen. Follow the onscreen instrucitons.

Fobos531 said:
what frimware did you flash? can you try performing a factory reset? to do so:
1) turn off the phone
2) press and hold volume down + power keys until the lg logo appears
3) let go of the both keys for 1 second
4) immediately press and hold them again (both keys) until you get to a factory reset screen. Follow the onscreen instrucitons.
Click to expand...
Click to collapse
Thanks a lot
i could factory reset, but after many try , i got to download mode, and i could flash ... i had realy to use the country rom, where i bought the phone, in my case , it work only whith the Colombien one....none other works, Now shall i try to flash with a cyanogène or a mui? would it works?

papilonaa said:
Thanks a lot
i could factory reset, but after many try , i got to download mode, and i could flash ... i had realy to use the country rom, where i bought the phone, in my case , it work only whith the Colombien one....none other works, Now shall i try to flash with a cyanogène or a mui? would it works?
Click to expand...
Click to collapse
There's no custom roms for Qualcomm Spirit. At least not yet.