Technology: The Ultimate Guide To Unbrick 16 Gb International Samsung Galaxy Note 3 (SM-N9005) And Upgrade To KitKat 4.4.2 Through Custom ROM
Original article, images and videos can be found on Locky's English Playground http://lockyep.blogspot.com/2014/01/technology-ultimate-guide-to-unbrick-16.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And I was going to make a good old demonstration of "how to install Stock KitKat ROM on your SM-N9005", until the whole thing got so out-of-hand... here are my failed attempts compressed into a real short video...
My Note 3 was soft-bricked, meaning that a failure in flashing software has caused my phone to become a 'brick', a not-dead-but-unusable condition.
It was a bummer! But it is one that can hardly avoid having all those upgrade tutorials on YouTube which didn't mention the uniqueness of 16Gb Hong Kong Note 3. Why should they mention anyway? They don't have 16Gb Hong Kong Note 3 in the first place.
Thanks Samsung for making the Hong Kong Note 3 so special, such that it is the Note 3 with the smallest storage in the world (16Gb) when the rest of the world are getting at least 32Gb! For this and for the trouble you have caused Samsung, I hate you!
After 2 days of research, I have finally arrived at a completely, perfectly usable state!!! And it is functioning with speed!!
However, from soft-bricked to success, the road had not been smooth. There was about a day or so that my phone was able to boot and use the internet, but had no in/outgoing call, no sound, no Google Now, no S-Voice, no camera, slow lockscreen and slow settings.
I have followed all the instructions given by several XDA members, but I still could not get it to work. Why?
That's because all those instructions are inaccurate. The thing is, minor details that are missing can be real serious, and for that, I want to write a very very detailed descriptions on how to solve this soft-brick issue specifically for 16 Gb International Samsung Galaxy Note 3 (SM-N9005) when upgrading to KitKat 4.4.2.
Before you start, you'll need,
a Custom ROM, eg. Sweet ROM v7.01 4.4.2 NA6
a leaked N9005XXUENA6 4.4.2 KitKat ROM for Note 3 Download on my blog
a Hong Kong N9005ZHUBMI7 Rescue ROM Download here
the latest CWM Recovery, eg 6.0.4.7 Download on my blog
Odin 3.07 Download on my blog
the latest Samsung USB Driver Download on my blog
Samsung Kies Download on my blog
Note 3 16Gb SM-N9005 from Hong Kong at 50% battery level
a Note 3 USB 3.0 cable
Installation Instructions:
Install Samsung Kies
Install Samsung USB Driver
Connect USB into PC and Note 3, then copy Custom ROM onto the SD card
Put Note 3 into Download mode by holding Power + Volume down + Home buttons at the same time until you see "Warning!!", then press Volume up
When you see "Downloading..." and Android logo, plug in the USB into the PC and Note 3
Run Odin 3.07 (See my video)
When you see a blue 0:[COM4], in the Bootloader put leaked KitKat's BL file, and in PIT, PDA, PHONE, CSC put Hong Kong N9005ZHUBMI7 Rescue ROM's PIT, AP, CP and CS respectively and then press Start to flash.
When Note 3 restarts, it will keep rebooting and it will only show Samsung boot screen, at this time, remove the battery and then put it back.
Repeat Step 4, 5 and 6
In Odin 3.07, go to PDA and choose CWM Recovery, eg 6.0.4.7, and press Start to flash, it will reboot automatically when complete. Unplug the USB.
When the phone reboots, it will boot into CWM Recovery. If it asks you to root phone, just say no. Otherwise, select Wipe data/factory rest --> yes, Wipe Cache --> yes, advance --> Wipe Dalvik Cache --> yes. This will erase the unwanted files and prepare your phone for the good stuff.
Go to install zip --> choose zip from /external_sd and select the Custom ROM you have chosen, then choose yes to flash. This will take about 3 minutes, press reboot after it is completed.
This reboot will be slow, and most likely there will be no sound at boot and errors at setup, be extremely patient and wait for the screen asking you to choose Language to appear. Choose the language you want, press Next, then do nothing else!!!!
Without doing anything else, repeat step 4, 5 and 6.
In Odin 3.07, go to CP, choose leaked KitKat's CP file and then press Start to flash.
When the phone reboots, you should hear the Samsung bootup music and then everything will be functioning perfectly!
The moral of the story is, you have got to have brain and perseverance to work with KitKat 4.4.2.
Only SweetROM can work? Or I can use others such as X-Note? Thanks
Sent from my SM-N9005 with CM11 temasek Unofficial + temasek Kernel via XDA Premium 4 mobile app
raychak said:
Only SweetROM can work? Or I can use others such as X-Note? Thanks
Sent from my SM-N9005 with CM11 temasek Unofficial + temasek Kernel via XDA Premium 4 mobile app
Click to expand...
Click to collapse
Any custom ROM will work.
I have a 16gb Hong Kong Note 3. Firstly I wish to give my congratulations for you, my friend. Fantastic post! Some questions, please:
1- My phone is stock and rooted since the first firmware. I don't upgrade it for the newest version HK Firmware. Is your guide useful for me if I want to update to kit kat and don't wait the official kit kat Hong Kong?
2- After the moment (final part of the guide) that we have to select the language and only check next can I just power off the phone to make easy to start the phone in download Mode to finish the process?
Sorry for my questions and my poor english, my friend. I have read several posts to learn with guys like you. Please let me know. Thank you so much!
Sent from my GT-N8000 using xda app-developers app
JN9 said:
I have a 16gb Hong Kong Note 3. Firstly I wish to give my congratulations for you, my friend. Fantastic post! Some questions, please:
1- My phone is stock and rooted since the first firmware. I don't upgrade it for the newest version HK Firmware. Is your guide useful for me if I want to update to kit kat and don't wait the official kit kat Hong Kong?
2- After the moment (final part of the guide) that we have to select the language and only check next can I just power off the phone to make easy to start the phone in download Mode to finish the process?
Sorry for my questions and my poor english, my friend. I have read several posts to learn with guys like you. Please let me know. Thank you so much!
Sent from my GT-N8000 using xda app-developers app
Click to expand...
Click to collapse
1. Yes, that is exactly what I did and what I thought. I didn't want to wait. I came from stock and rooted 4.3
2. Powering off the phone first, in my opinion, doesn't make going into download mode easier. So just directly hold Power+Vol Down+ Home to get into Download Mode
I am in the same soft brick boat but I have 32gb. I think it's HK as it was shipped from Hong Kong. Will this guide work for me to?
Sent from my HTC One X using xda app-developers app
mabrady85 said:
I am in the same soft brick boat but I have 32gb. I think it's HK as it was shipped from Hong Kong. Will this guide work for me to?
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
No harm trying. Nothing to lose
Sent from my SM-N9005 using xda app-developers app
will do and will let you know
There is no PIT file in the N9005XXUENA6 zip file
mabrady85 said:
There is no PIT file in the N9005XXUENA6 zip file
Click to expand...
Click to collapse
Exactly, because you have to read more carefully. It is in the N9005ZHUBMI7 Rescue Pack
Locky Loki said:
1. Yes, that is exactly what I did and what I thought. I didn't want to wait. I came from stock and rooted 4.3
2. Powering off the phone first, in my opinion, doesn't make going into download mode easier. So just directly hold Power+Vol Down+ Home to get into Download Mode
Click to expand...
Click to collapse
My friend, I am very grateful for your atention. The guide inside in your blog is fantastic and very rich. I will try to flash kit kat and I will let you know.
Sent from my SM-N9005 using xda app-developers app
JN9 said:
My friend, I am very grateful for your atention. The guide inside in your blog is fantastic and very rich. I will try to flash kit kat and I will let you know.
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Await for good news
Locky Loki said:
Exactly, because you have to read more carefully. It is in the N9005ZHUBMI7 Rescue Pack
Click to expand...
Click to collapse
Just downloaded the rescue pack but can't find the PIT file...
raychak said:
Just downloaded the rescue pack but can't find the PIT file...
Click to expand...
Click to collapse
You got the download link from my blog?
http://pan.baidu.com/s/1CBNGR
Don't try to find it yourself from Google.
Locky Loki said:
You got the download link from my blog?
http://pan.baidu.com/s/1CBNGR
Click to expand...
Click to collapse
Yes, there are 3 files after extracted.
- The Kernel file unable to view or extract to see the content.
- I extracted the tar.md5 file, but no PIT inside...
Thanks
raychak said:
Yes, there are 3 files after extracted.
- The Kernel file unable to view or extract to see the content.
- I extracted the tar.md5 file, but no PIT inside...
Thanks
Click to expand...
Click to collapse
Please check with this photo
https://drive.google.com/file/d/0B9emHQBd5COmX01jYXJLRjdwMFE/edit?usp=sharing
Your download is probably incomplete or faulty. Try using download manager like JDownloader.
PIT file for you
https://drive.google.com/file/d/0B9emHQBd5COmeGlCeUJaeFh5aGs/edit?usp=sharing
Locky Loki said:
Please check with this photo
https://drive.google.com/file/d/0B9emHQBd5COmX01jYXJLRjdwMFE/edit?usp=sharing
Your download is probably incomplete or faulty. Try using download manager like JDownloader.
PIT file for you
https://drive.google.com/file/d/0B9emHQBd5COmeGlCeUJaeFh5aGs/edit?usp=sharing
Click to expand...
Click to collapse
The file named TGY-N9005ZHUBMI7-20130926192530.rar, is that correct? I downloaded twice with baidu download manager but the downloaded file only contain 3 files, not the files you shown on the photo...
raychak said:
The file named TGY-N9005ZHUBMI7-20130926192530.rar, is that correct? I downloaded twice with baidu download manager but the downloaded file only contain 3 files, not the files you shown on the photo...
Click to expand...
Click to collapse
Try this
http://pan.baidu.com/s/1qxi81
Locky Loki said:
Try this
http://pan.baidu.com/s/1qxi81
Click to expand...
Click to collapse
I just found this version too, downloading now... still not 100% sure I am really want to flash 4.4.2 now as I really don't my Note 3 got soft-bricked during coming few days of holiday. BTW, except from the Note 3 you owned upgraded to 4.4.2 with this method, is there any other user upgraded to 4.4.2 with this method? Thanks
raychak said:
I just found this version too, downloading now... still not 100% sure I am really want to flash 4.4.2 now as I really don't my Note 3 got soft-bricked during coming few days of holiday. BTW, except from the Note 3 you owned upgraded to 4.4.2 with this method, is there any other user upgraded to 4.4.2 with this method? Thanks
Click to expand...
Click to collapse
Get this done and you will have a great holiday.
I suppose many did, many wrote on XDA, but none wrote as detailed as I did.
Related
I need the stock rom for my SGT 7.7 HK version with TYG CSC.
I installed yesterday the new austria stock rom, in hope that the csc will change in to ATO, but now im not able to get updates over kies and csc didnt chance.......:-(
Want back stock to get updates........ If someone can help it would be nice O
Summary for all :
xenix96 said:
However i managed to change CSC from TYG to ATO..... No more HONG KONG Version!!!! Now it is ATO Austria Version
I installed yesterday Austria version on my device, as i sad with the hope CSC will change to ATO. But i recived from Kies that my device cant be update over KIES!!!!
Well wanted now back to TYG Hong Kong Version. Before i start with Odin i wanted do a factory reset and a full wipe in recovery.
Great thing comes now... i started recovery and then automaticly its starts a "update..." at least there stands the message: "CSC applied to ATO"
I sayed ok and wanted check that in KIES..... and it says now:
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now i am able to get OTA updates from Austria DDDD
Click to expand...
Click to collapse
--------------------------------------------------------------
xenix96 said:
i just upload it on file factory ---13minutes ETA
In future i will make thread with a OFFICIAL FIRMWARE POOL for SGT 7.7 P6800
ill Update this post in 13 minutes with link for the Hong Kong version
--------------------------------------------------
+++UPDATE+++
Official SGT 7.7 P6800 Firmwares
I did a selfextracting .exe file. So just extract file somewhere and u get a .tar file for Odin
I PMed Intratech he will help me out.
Click to expand...
Click to collapse
Quote from PM
Intratech
Sure no problem, I don't mind at all.
Click to expand...
Click to collapse
------------------------------------------
For all
Click to expand...
Click to collapse
adinis78 said:
thanks, much appreciated
Editncec again i really appreciate it but trying to donwload it is such a hasle, going through all those screens and the long wait.
2nd Edit: tried to download and after an hour wait i got a message stating that the download could be a virus so it did not download, i did this twice, so dont know what the issue is
Click to expand...
Click to collapse
xenix96 said:
1st this Firmwares are directly uploaded from "SamMobile" except P6800ZSKL2. P6800ZSKL2 is checked and tried by my self i got Bitdefender Total Security and there is non virus.
2nd i rescanned all files with Bitdefender .. there is no virus!!!
3rd 8 people downloaded this file and you are the 1st who say there is a virus....
4th if i find a online virus scanner who scans 500MB ill show u the result of this scan.
....ill update this post then
+++ UPDATE +++
I didnt find a online virus scanner who scans files with 500mb!
But ill show u the scan protocol of my Bitdefender Total Security 2012:
Click to expand...
Click to collapse
-------------------------------------------------------------------------------------------
mitoradeS said:
Guys I have one of the prototype versions of p6800 (IR port is working with Peel app!) with Kies giving me HIDSWVER P6800XXKJ2/P6800OXAKJ2/P6800XXKJ2/P6800XXKJ2. My CSC is XEU.
Kies does not allow me to upgrade. Which would be a correct firmware to flash?
Click to expand...
Click to collapse
xenix96 said:
I think u cant flash any other Firmware (except Custom Roms where IR Port driver is inclueded) cause u need IR Port driver in the Firmware.
And prolly all actually offcial Firmwares doesnt got this driver. Cause official SGT7 7.7 devices got no IR Port.
If im wrong just correct me
Click to expand...
Click to collapse
mitoradeS said:
Sounds reasonable, but I should be able to flash my tablet without bricking it, shouldn't I?
Also in my case, lock screen and telephony do not work. I hope they would be fixed.
Click to expand...
Click to collapse
xenix96 said:
Well i dont think that u can just use any firmware .... if its where so then why samsung make GT-P6800 and GT-P6810 firmwares ?
The only difference is the 3G module for Mobile Network ...
And some guys in SamMobile.com or thegalaxytabforum.com forum did it ..... They Installed on a GT-P6800 a GT-P6810 firmware and got bricked their devices...
So plz dont install any firmware if you are not sure there is a IR port driver or not.
And at all : Dont deinstall Busybox when u rooted ur GT-6800 or GT-P6810 cause this damage however ur WIFI module and u will get a bricked device ... thats just a experiance from SamMobile.com and thegalaxytabforum.com forum users..
Click to expand...
Click to collapse
Sent from my GT-P6800 (ATO)Austria Version now using XDA App
The download link is posted somewhere in this forum. Please use the search function or google it.
earthman5678 said:
The download link is posted somewhere in this forum. Please use the search function or google it.
Click to expand...
Click to collapse
I couldn't fond the Hong Kong version of the ROM as well, mind if you give me some pointers as well?
Sent from my GT-P6800 using XDA App
kazuni said:
I couldn't fond the Hong Kong version of the ROM as well, mind if you give me some pointers as well?
Sent from my GT-P6800 using XDA App
Click to expand...
Click to collapse
P6800ZSKLA: Go to http://www.u-file.net/ and search for P6800 under Top Files.
P6800ZSLA2: Download from http://115.com/file/e6p6vv4k - you will need to sign up first (but it's free of charge). Password of the 7z file is b.it168.com.
krystalho said:
P6800ZSKLA: Go to http://www.u-file.net/ and search for P6800 under Top Files.
P6800ZSLA2: Download from http://115.com/file/e6p6vv4k - you will need to sign up first (but it's free of charge). Password of the 7z file is b.it168.com.
Click to expand...
Click to collapse
Thanks might i cant read or understand chinese but the P6800ZSKLA file will solve the problem
krystalho said:
P6800ZSKLA: Go to http://www.u-file.net/ and search for P6800 under Top Files.
P6800ZSLA2: Download from http://115.com/file/e6p6vv4k - you will need to sign up first (but it's free of charge). Password of the 7z file is b.it168.com.
Click to expand...
Click to collapse
ok i found the file in u-file.net and there are options to download, i downloaded the one named as P6800ZSKL2.zip.005, when i when to try Odin it can not find file, i tried to open it but it wont open, what am i missing? and the second wesite is in(chinese?) is there an english version of the page?
adinis78 said:
ok i found the file in u-file.net and there are options to download, i downloaded the one named as P6800ZSKL2.zip.005, when i when to try Odin it can not find file, i tried to open it but it wont open, what am i missing?
Click to expand...
Click to collapse
You are missing the other parts (part 1-4) of the multi-file archive
UgloBuglo said:
You are missing the other parts (part 1-4) of the multi-file archive
Click to expand...
Click to collapse
ohhh the what do i do? never went through this before. Sorry if i come out to be a noob but i am perfectly comfortable using odin with original tab, this is just a different set up
adinis78 said:
ohhh the what do i do? never went through this before. Sorry if i come out to be a noob but i am perfectly comfortable using odin with original tab, this is just a different set up
Click to expand...
Click to collapse
I've never used Odin, but I guess you need to download all parts of the archive to your computer, and then unzip it with something like Winzip or similar if you are on a Windows box.
After that you can probably use Odin as usual with the unzipped file/files.
UgloBuglo said:
I've never used Odin, but I guess you need to download all parts of the archive to your computer, and then unzip it with something like Winzip or similar if you are on a Windows box.
After that you can probably use Odin as usual with the unzipped file/files.
Click to expand...
Click to collapse
ok thanks ill download all of them and see what option i get
EDIT: ok so i donwloaded all 5 .zip files from u-file.net and i can not open any of them, i went ahead and ziped all files into one main file, opened Odin and nothing, what am i doing wrong or missing? i am not that dumb, i dont think.
adinis78 said:
i went ahead and ziped all files into one main file,
Click to expand...
Click to collapse
Eeeeh, you shouldn't zip them together to a single file, you should open them in winzip and extract the content....
UgloBuglo said:
Eeeeh, you shouldn't zip them together to a single file, you should open them in winzip and extract the content....
Click to expand...
Click to collapse
Thats the thing when i downloaded the files they where not a valid .zip file please take a look
Even if i choose winzip as the program to open it, it says its not a valid file
Sent from my GT-P6800 using xda premium
However i managed to change CSC from TYG to ATO..... No more HONG KONG Version!!!! Now it is ATO Austria Version
I installed yesterday Austria version on my device, as i sad with the hope CSC will change to ATO. But i recived from Kies that my device cant be update over KIES!!!!
Well wanted now back to TYG Hong Kong Version. Before i start with Odin i wanted do a factory reset and a full wipe in recovery.
Great thing comes now... i started recovery and then automaticly its starts a "update..." at least there stands the message: "CSC applied to ATO"
I sayed ok and wanted check that in KIES..... and it says now:
Now i am able to get OTA updates from Austria DDDD
xenix96 said:
However i managed to change CSC from TYG to ATO..... No more HONG KONG Version!!!! Now it is ATO Austria Version
I installed yesterday Austria version on my device, as i sad with the hope CSC will change to ATO. But i recived from Kies that my device cant be update over KIES!!!!
Well wanted now back to TYG Hong Kong Version. Before i start with Odin i wanted do a factory reset and a full wipe in recovery.
Great thing comes now... i started recovery and then automaticly its starts a "update..." at least there stands the message: "CSC applied to ATO"
I sayed ok and wanted check that in KIES..... and it says now:
Now i am able to get OTA updates from Austria DDDD
Click to expand...
Click to collapse
where did you get the hong kong version, i cant find it anywhere not even via the links provided
i just upload it on file factory ---13minutes ETA
In future i will make thread with a OFFICIAL FIRMWARE POOL for SGT 7.7 P6800
ill Update this post in 13 minutes with link for the Hong Kong version
--------------------------------------------------
+++UPDATE+++
Official SGT 7.7 P6800 Firmwares
I did a selfextracting .exe file. So just extract file somewhere and u get a .tar file for Odin
I PMed Intratech he will help me out.
Quote from PM
Intratech
Sure no problem, I don't mind at all.
Click to expand...
Click to collapse
------------------------------------------
For all
xenix96 said:
i just upload it on file factory ---13minutes ETA
In future i will make thread with a OFFICIAL FIRMWARE POOL for SGT 7.7 P6800
ill Update this post in 13 minutes with link for the Hong Kong version
For all
Click to expand...
Click to collapse
thanks, we need an uniform link where we can download original hong kong version to avoid going form link to link and post to post to find the right file.
adinis78 said:
Thats the thing when i downloaded the files they where not a valid .zip file please take a look
View attachment 870605
Even if i choose winzip as the program to open it, it says its not a valid file
Sent from my GT-P6800 using xda premium
Click to expand...
Click to collapse
That means one of your zip file is corrupted. Just use winzip to unzip the first file and end result you will get exe file : P6800ZSKL2.exe
Run this exe file to extract out the rom files
xenix96 said:
i just upload it on file factory ---13minutes ETA
In future i will make thread with a OFFICIAL FIRMWARE POOL for SGT 7.7 P6800
ill Update this post in 13 minutes with link for the Hong Kong version
--------------------------------------------------
+++UPDATE+++
Official SGT 7.7 P6800 Firmwares
I did a selfextracting .exe file. So just extract file somewhere and u get a .tar file for Odin
I PMed Intratech he will help me out.
------------------------------------------
For all
Click to expand...
Click to collapse
thanks, much appreciated
Editncec again i really appreciate it but trying to donwload it is such a hasle, going through all those screens and the long wait.
2nd Edit: tried to download and after an hour wait i got a message stating that the download could be a virus so it did not download, i did this twice, so dont know what the issue is
krystalho said:
P6800ZSKLA: Go to and search for P6800 under Top Files.
P6800ZSLA2: Download from ] - you will need to sign up first (but it's free of charge). Password of the 7z file is b.it168.com.
Click to expand...
Click to collapse
wow really thanksss for the info to Krystalho, I need P6800ZSLA2, but now I am confused how to download from this website, since all chinesse language, Would someone kind enough to get this stock rom by having mirror in english download side for me pleaseeeee? Really really thanksss in advance for your kindness and help in advance. )
Guys I have one of the prototype versions of p6800 (IR port is working with Peel app!) with Kies giving me HIDSWVER P6800XXKJ2/P6800OXAKJ2/P6800XXKJ2/P6800XXKJ2. My CSC is XEU.
Kies does not allow me to upgrade. Which would be a correct firmware to flash?
For those that want to flash alternative firmware (custom or official), but wish to continue to use the original modem.
This is handy in the above circumstances, particularly for thoose using the GT-I9300T, and where no firmware is yet released for download.
NOTE: Due to possible confusion, this I9300TDULE6 modem attached is extracted from my Thailand firmware and is identical to other regions using I9300TDULE6 such as Vodafone AU.
Requirements:
1. CWM Recovery & root (Thanks Chainfire!)
2. ADB setup and know how to use it! or Terminal Emulator app
3. Samsung KIES drivers installed
4. Power on device, Enable USB debugging
**If you don’t how to do above, then XDA forum search and Google is your friend**
Steps:
1. Dump your current modem onto your internal sdcard
# Run Terminal Emulator app and input steps b -> e
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OR
# Connect USB to PC & run PC Command Prompt (CMD) & input steps a -> e
a) adb shell
b) su
c) dd if=/dev/block/mmcblk0p7 of=/sdcard/modem.bin bs=4096
d) exit
e) exit
2. Download SGS3 (I9300) CWM Modem zip below (don't extract) to PC (Thailand_I9300TDULE6 is attached)
3. Drag & drop the dumped modem.bin directly into zip
4. "Copy & replace" when prompted
5. Rename zip to new version
6. Copy zip to internal sdcard
7. After flashing any firmware, boot into CWM Recovery and flash from internal sdcard
8. Reboot & enjoy
+ Check modem version: phone menu > settings > about device > baseband version > .......
++ If you wish to reduce the size of the modem.bin from 32 to 12 MB, please refer to this post :
http://forum.xda-developers.com/showpost.php?p=35905178&postcount=52
With a little bit of stuffing about, it's even possible to do all this without a PC using Terminal Emulator (dump modem.bin) & Root Explorer apps (extract zip, move/replace modem.bin & re- zip)
EDIT: Due to possible confusion, this I9300TDULE6 modem attached is extracted from my Thailand firmware and is identical to other regions using I9300TDULE6 such as Vodafone AU.
Great stuff. Really handy and just what I was looking for.
Also, I have a Vodafone version T model with modem DULE6, same as your attachment. I could just use that?
Sent from my GT-I9300T using xda premium
sxi200 said:
Great stuff. Really handy and just what I was looking for.
Also, I have a Vodafone version T model with modem DULE6, same as your attachment. I could just use that?
Sent from my GT-I9300T using xda premium
Click to expand...
Click to collapse
Double check iin phone menu > settings > about device > baseband version is actually I9300TDULE6.
If it has the T, it should be same and good to flash.
UpInTheAir said:
Double check iin phone menu > settings > about device > baseband version is actually I9300TDULE6.
If it has the T, it should be same and good to flash.
Click to expand...
Click to collapse
Yeah mate I did that first thing. It is exactly the same. You have made me and soon many others very happy :thumbup:. I have updated the Aussie thread to include the modem as well as your thread. Check the OP. I have given you credit.
Custom roms here I come. Oh yeah!!!!!
Sent from my GT-I9300T using xda premium
sxi200 said:
Yeah mate I did that first thing. It is exactly the same. You have made me and soon many others very happy :thumbup:. I have updated the Aussie thread to include the modem as well as your thread. Check the OP. I have given you credit.
Custom roms here I come. Oh yeah!!!!!
Sent from my GT-I9300T using xda premium
Click to expand...
Click to collapse
No worries. Here to share and help (when possible).
I have extracted my modem off my Vodafone I9300TDULE6, just need to figure out how to make it flashable.
Tiz ok, figured it out.
Lonski said:
I have extracted my modem off my Vodafone I9300TDULE6, just need to figure out how to make it flashable.
Click to expand...
Click to collapse
The modem I've linked is same as yours and ready to flash. Your welcome to use it, as are all others. This will save you some time
The guide is mainly for any other possible (current or future) T modems that may need to be extracted if specific firmware is not yet made available for release.
To answer your Q, and of you like to just try and do things yourself (education), just follow Steps 2-8.
Basically, download my zip (don't extract), drag & drop your dumped modem.bin straight into the zip, "copy & replace" when prompted. Done
Sent from my GT-I9300T using xda premium
Thanks for the instructions UIA I can try a few different roms now.
naka11 said:
Thanks for the instructions UIA I can try a few different roms now.
Click to expand...
Click to collapse
No worries.
Although, if you have I9300TDULE6, the attached modem in post#1 is identical to Vodafone AU
UpInTheAir said:
For those that want to flash alternative firmware (custom or official), but wish to continue to use the original modem.
EDIT: Due to possible confusion, this I9300TDULE6 modem attached is extracted from my Thailand firmware and is identical to other regions such as Vodafone AU.
Click to expand...
Click to collapse
Thanks for the easy to follow guide on extracting your T modem from the i9300T. I have pulled the Vodafone modem off of my i9300T but I've got a feeling it wont be the same as Thailands T modem. Im sure Vodafone would have tweaked their modem file to suit their network.
Anyways, If anyone wants the Australian Vodafone i9300TDULE6 modem CWM file, here is a link to download it.
http://db.tt/SLBehsnU
http://dl.dropbox.com/u/34952687/SGS3 Modems/CWM_Modem_VodafoneOZ_I9300TDULE6.zip
If someone could do the Telstra modem file that would be a great help, since Im using my vodafone T model on Telstra.
Cheers guys..
I'll read through this and dump my Telstra one later tonight if I get time... assuming my original stock CWM backup still works
actiff said:
Thanks for the easy to follow guide on extracting your T modem from the i9300T. I have pulled the Vodafone modem off of my i9300T but I've got a feeling it wont be the same as Thailands T modem. Im sure Vodafone would have tweaked their modem file to suit their network.
Anyways, If anyone wants the Australian Vodafone i9300TDULE6 modem CWM file, here is a link to download it.
http://db.tt/SLBehsnU
http://dl.dropbox.com/u/34952687/SGS3 Modems/CWM_Modem_VodafoneOZ_I9300TDULE6.zip
If someone could do the Telstra modem file that would be a great help, since Im using my vodafone T model on Telstra.
Cheers guys..
Click to expand...
Click to collapse
TDULE6 is the same, otherwise it would be benamed as all have before them on SGSII. The same could now be said here with SGSIII.
All free to use the guide and backup your device though
Hrrrrmmm.... so I have just realised that CWM backups do not actually backup the modem, so I cannot extract the stock Telstra modem from what I have.
But when booted into my stock Telstra CWM backup the build number is listed as IMM76D.I9300TDUALE6
So I'm guessing (could easily be wrong though.....) that the Telstra specific modem will have the basband version designation I9300TDUALE6
(just one little extra A )
It would be great if someone with a stock Telstra handset could check this, and if true extract that modem that would be swell....
patchseven said:
I'll read through this and dump my Telstra one later tonight if I get time... assuming my original stock CWM backup still works
Click to expand...
Click to collapse
I 'm afraid CWM Recovery doesn't backup the modem
Check your clockworkmod folder..........
1. boot.img
2. recovery.img
3. cache.ext4.tar
4. data.ext4.tar
5. system.ext4.tar
6. and nandroid.md5 (checksum)
Edit: Just saw your post above
patchseven said:
Hrrrrmmm.... so I have just realised that CWM backups do not actually backup the modem, so I cannot extract the stock Telstra modem from what I have.
But when booted into my stock Telstra CWM backup the build number is listed as IMM76D.I9300TDUALE6
So I'm guessing (could easily be wrong though.....) that the Telstra specific modem will have the basband version designation I9300TDUALE6
(just one little extra A )
It would be great if someone with a stock Telstra handset could check this, and if true extract that modem that would be swell....
Click to expand...
Click to collapse
You need to check the "baseband version" not the build.
Baseband = modem = radio
Edit: would be nice for anyTelsta user to dump their stock modem for us. I use Telstra when in Oz due to the greater coverage.
actifF give this a go. I think I did it right.
Gumboot
Gumboot said:
actifF give this a go. I think I did it right.
Gumboot
Click to expand...
Click to collapse
Thanks for that.
But,.......I see it is the same named TDULE6, same as Thailand & Vodafone AU in the .rar you provided.
I noticed the size of the modem was identical when I replaced the existing TDULE6 modem into my zip.
In any case, I repacked into a CWM flashable .zip and flashed away (just in case)
The baseband still remains I9300TDULE6 and ni change to signal, strength etc
Are you sure this is official Telstra, have you flashed anything that may have overwritten the original modem? If not, and your running pure stock (except root and CWM recovery), what is your baseband and firmware details?
In dialer, type:
*#1234#
Thanks
Thanks Just flash the Telstra modem and use it on my Optus GS3..lighting quick!!!!
Noticable difference..strongly recommend.
I am of course using my GS3 on Telstra
Now the modem is I9300TDULE6
Screen Capture *#1234#
nicholas099 said:
Screen Capture *#1234#
Click to expand...
Click to collapse
Yep, Telstra TUDLE6 modem is SAME as Vodafone AU, SAME as Thailand.
They may release specific carrier modems (such as on SGS2) when firmware is more mature.
If you find any difference, it will be placebo.
Testing needs to be done at same location and time of day.
Sent from my GT-I9300T using xda premium
This is the latest firmware (T800XXU1ANF8) as of June 30, 2014 for the Galaxy Tab S 10.5 (Wifi) model (SM-T800).
"No-Wipe" means your app data and storage will all stay 100% in tact. Only system mods, custom kernels, and root will be removed as you are flashing stock firmware.
Please feel free to use as you see fit.
Download: http://www.androidfilehost.com/?fid=23501681358555496
Thank you . You Rock.
Question : Your file "T800XXU1ANF8" . Is it the same file as the U.S. Ver. KOT49H-T800XXU1ANF8 ?? Universal ?
Thanks,................Brian
nuclearmeltdown2046 said:
Thank you . You Rock.
Question : Your file "T800XXU1ANF8" . Is it the same file as the U.S. Ver. KOT49H-T800XXU1ANF8 ?? Universal ?
Thanks,................Brian
Click to expand...
Click to collapse
Most certainly is. :good:
open1your1eyes0 said:
This is the latest firmware (T800XXU1ANF8) as of June 30, 2014 for the Galaxy Tab S 10.5 (Wifi) model (SM-T800).
"No-Wipe" means your app data and storage will all stay 100% in tact. Only system mods, custom kernels, and root will be removed as you are flashing stock firmware.
Please feel free to use as you see fit.
Download: http://www.androidfilehost.com/?fid=23501681358555496
Click to expand...
Click to collapse
Way Cool , Thanks, much appreciated.
Anyone update to this firmware yet? If so how did it go? Any issues. Want to get some feedback before I take the plunge
I'm a newb. What does this do?
xRevilatioNx said:
I'm a newb. What does this do?
Click to expand...
Click to collapse
Factory image file in case one would get stuck trying to do something like root the tablet unsuccessfully. You could use Odin and this file to restore the tablet. It's not an "upgrade" as a previous poster eluded to. It's worth mentioning that this particular one doesn't overwrite your internal SD directory which can be nice sometimes.
Interesting, Kudos for the share :good:
@open1your1eyes0 do you know what the block the boot.img is stored on :?:
to be deleted..
What is the correct way to use this in Odin? After rooting my 10.5 I am getting a wifi bug and want to use this to revert and try again. I want to be sure I pick the correct Odin options though.
*edit. Never mind. Found steps in a different thread for a different device for doing this. Seems it is the same as rooting. Just wanted to be sure!
Could someone turn this into a flashable zip please? I deleted a system file i shoulodnt have and need to find it in the /system directory. I don't remember the name of it...but it was right below the SideSync 3 files in Titantium Background....it was like sec. something....If someone could post that file for me that would be great.
Sent from my Samsung Galaxy Tab S 10.1 BEST SCRiEENEVER
open1your1eyes0 said:
This is the latest firmware (T800XXU1ANF8) as of June 30, 2014 for the Galaxy Tab S 10.5 (Wifi) model (SM-T800).
"No-Wipe" means your app data and storage will all stay 100% in tact. Only system mods, custom kernels, and root will be removed as you are flashing stock firmware.
Please feel free to use as you see fit.
Download: http://www.androidfilehost.com/?fid=23501681358555496
Click to expand...
Click to collapse
To flash this in odin
1. Download and extract.
2. In odin click on the AP button to load your extracted download.
3. Click on the check box next to the AP button.
4. Click start. Your tab will reboot when finished.
Would like someone else to confirm the above before people start following these instructions. Since they are here, they may be in trouble.
Sent from my rooted Galaxy S5.
johnnytraveler said:
To flash this in odin
1. Download and extract.
2. In odin click on the AP button to load your extracted download.
3. Click on the check box next to the AP button.
4. Click start. Your tab will reboot when finished.
Would like someone else to confirm the above before people start following these instructions. Since they are here, they may be in trouble.
Sent from my rooted Galaxy S5.
Click to expand...
Click to collapse
I tried yesterday and bricked my device. Odin fails when flashing hidden.img.
I have the SM-T800 (Canadian model). I tried to get the official version from Kies, but it kept saying the version cannot be updated.
I went to sammobile.com to get the Canada version (T800XXU1ANFB_T800XAC1ANF5_XAC) and the zip file was corrupted... After a couple of hours I find a link on rapidgator.net and thank god It worked.
I thought this version would work on any SM-T800 model since it's just a wifi tablet?
chetus said:
I tried yesterday and bricked my device. Odin fails when flashing hidden.img.
I have the SM-T800 (Canadian model). I tried to get the official version from Kies, but it kept saying the version cannot be updated.
I went to sammobile.com to get the Canada version (T800XXU1ANFB_T800XAC1ANF5_XAC) and the zip file was corrupted... After a couple of hours I find a link on rapidgator.net and thank god It worked.
I thought this version would work on any SM-T800 model since it's just a wifi tablet?
Click to expand...
Click to collapse
Theres a guy in China with the same problem. So when it gets to 'hidden.img' it seems the firmware is doing a country check. If not matching, it won't load.
WORD OF WARNING TO EVERYONE.
Sent from my rooted Galaxy S5.
johnnytraveler said:
Theres a guy in China with the same problem. So when it gets to 'hidden.img' it seems the firmware is doing a country check. If not matching, it won't load.
WORD OF WARNING TO EVERYONE.
Sent from my rooted Galaxy S5.
Click to expand...
Click to collapse
Anyone have a FULL WIPE version of the FACTORY Image ?
chetus said:
I tried yesterday and bricked my device. Odin fails when flashing hidden.img.
I have the SM-T800 (Canadian model). I tried to get the official version from Kies, but it kept saying the version cannot be updated.
I went to sammobile.com to get the Canada version (T800XXU1ANFB_T800XAC1ANF5_XAC) and the zip file was corrupted... After a couple of hours I find a link on rapidgator.net and thank god It worked.
I thought this version would work on any SM-T800 model since it's just a wifi tablet?
Click to expand...
Click to collapse
Fyi this is country specific to US and it does work. If you bought your device in a different country you have to go to the Sammobile.com website to find your country firmware or else your device will forever be bricked. Also chetus is right, the Canadian version on Sammobile.com is corrupted. There is other alternative download out there though.
Does this put a rooted device back to factory standard, and also enables OTA updates to be received?
thanks
hm....... went to download mode, loaded the file in odin. when i try to start it just gives a message All threads completed. (succeed 0 / failed 0). doesnt flash anything. Any ideas?
So if I bought my tablet in Germany I can't flash this it is Region-dependant
This worked for me, as did following the instructions above. I did have to use cf-autoroot again when done.
I do have the us version tablet.
Sent from my SM-T800 using Tapatalk
deleted
This is to announce that @Chainfire has kindly provided his CF-Auto-Root to support various Galaxy Note Edge SM-N915* devices !!
I DO NOT SUPPORT THIS THREAD ANY LONGER, SO PLEASE FLASH AT YOUR OWN RISK AND DO NOT PM FOR HELP or Q&A
Click to expand...
Click to collapse
THIS THREAD IS JUST A REFERENCE & LINK TO CHAINFIRE'S WORK, NOTHING ELSE
THIS WILL VOID WARRANTY & SET KNOX COUNTER 0x1. THERE IS NO KNOWN METHOD TO ROOT WITHOUT TRIPPING KNOX !!
Repository of supported devices:
http://autoroot.chainfire.eu/
If your device is NOT SUPPORTED:
1. Download your deice firmware from sammobile.com or samsung-updates.com
2. Extract recovery.img
3. Post your recovery.img in Chainfire OFFICIAL CF-AUTO-ROOT THREAD !! and ask him nicely to look into it
If your device has issues with CF-Auto Root method:
* If your device has a LOCKED BOOTLOADER, then you're out of luck. There is no known method to unlock.
* Post in Chainfire OFFICIAL CF-AUTO-ROOT THREAD !!
Official XDA CF-Auto-Root Thread:
PLEASE POST ALL QUERIES RELATED TO CF-AUTO ROOT TO THE BELOW OFFICIAL CF-AUTO-ROOT THREAD !!
http://forum.xda-developers.com/showthread.php?t=1980683
I have only personally tested SM-N915S model and confirm root working. I can not vouch for any other device models. Just make sure you have your full firmware package available to recover from a soft brick and read the thread before attempting to flash !!
Method used for my SM-N915S:
1. Advised: Have a full stock firmware package available (just in case of soft brick) [sammobile.com or samsung-updates.com]
2. Have Samsung USB drivers installed on Windows PC (Easiest way is DL KIES from Samsung)
3. DISABLE REACTIVATION LOCK: device settings > security > reactivation lock >> DISABLE (uncheck)
4. Flash via Odin [I used Odin3 v3.07 - attachment] as per Chainfire's instructions !
** If unsure how to use Odin, there are many guides found by searching !
5. Wait around 30 secs after flash (stuck on boot screen), and hopefully device will boot.
6. Open SuperSU app and update SU if prompted
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sweet! So will this root the Sprint Note Edge successfully?
powerstroke said:
Sweet! So will this root the Sprint Note Edge successfully?
Click to expand...
Click to collapse
I will let you know in a few minutes.
Next1776 said:
I will let you know in a few minutes.
Click to expand...
Click to collapse
Ok, good luck and thank you. By the way, which Firmware are you on?
What? What ?
I noticed att edge listed on 1st post. I can root att edge? Anyone able to confirm?
Sorry, 915t. I thought t stands for att. It' for tmobile.
Root on Sprint SM915P.... CHECK !
Okay, my Sprint SM915P phone is successfully rooted. It went down pretty much how it did in this thread : http://forum.xda-developers.com/note-edge/general/easy-steps-stock-odin-n915tuvu1anjl-sm-t2943993
I didn't install the SD card fix yet...have to check that out first.
I got the "FAIL" messsage after flashing the CF autoroot tar file, then I thought WTH, I'll see if the Tmobile variant process works, so I tried it, and it worked. I have rebooted several times and it seems ROOT is sticking. Recovery had a hard time finding the UPdate SU file for some reason, but I eventually did, and flashed it.
So, my recommendation is to flash the Chainfire Autoroot tar file for the Sprint variant first, then follow the thread I referenced above for the rest. Your results may be different, so buyer beware! Good luck.
Many Thanks to Chainfire and TEKHD , you guys rock!
powerstroke said:
Ok, good luck and thank you. By the way, which Firmware are you on?
Click to expand...
Click to collapse
NK1 Firmware
Next1776 said:
Okay, my Sprint SM915P phone is successfully rooted. It went down pretty much how it did in this thread : http://forum.xda-developers.com/note-edge/general/easy-steps-stock-odin-n915tuvu1anjl-sm-t2943993
I didn't install the SD card fix yet...have to check that out first.
I got the "FAIL" messsage after flashing the CF autoroot tar file, then I thought WTH, I'll see if the Tmobile variant process works, so I tried it, and it worked. I have rebooted several times and it seems ROOT is sticking. Recovery had a hard time finding the UPdate SU file for some reason, but I eventually did, and flashed it.
So, my recommendation is to flash the Chainfire Autoroot tar file for the Sprint variant first, then follow the thread I referenced above for the rest. Your results may be different, so buyer beware! Good luck.
Many Thanks to Chainfire and TEKHD , you guys rock!
Click to expand...
Click to collapse
Awesome thank you. I will give it a shot after work tonight. I am on the NK1 firmware as well.
Any users of the various device variants please inform others what's working and what's not with the official CF-Auto-Root method.
Freeeeedom! (on Sprint)
Does this also mean no more autoupdates? {knox tripped}
blackinjun said:
Does this also mean no more autoupdates? {knox tripped}
Click to expand...
Click to collapse
No be deal.
I always disable/remove update and use Odin to flash any stock ROM from sammobile.com or samsung-updates.com .
UpInTheAir said:
This is to announce that @Chainfire has kindly provided his CF-Auto-Root to support various Galaxy Note Edge SM-N915x devices !!
Current models supported:
SM-N915F
SM-N915G
SM-N915P (USA - Sprint)
SM-N915S (Korea - SKT)
SM-N915T (USA T-Mobile)
Download Here: >> CF-Auto-Root Repository
>> Official XDA CF-Auto-Root Thread <<
I have attached Odin3 v3.07 at the end of this post
Would recommend to donate to the CHAMPION of Root, or purchase SuperSU Pro or any other one of his wonderful apps
Root personally confirmed working for Samsung Galaxy Note Edge Exynos Korea SM-N915 "S" via the legend Chainfire CF-Auto-Root
WARNING : KNOX COUNTER WILL BE TRIPPED AND WARRANTY VOID - THERE IS NO CURRENTLY KNOWN METHOD TO RESET THE COUNTER OR ROOT WITHOUT TRIPPING KNOX !!
There is no need to elaborate too much on install instructions, they are found in his thread, website and all over the web
Method:
1. Advised: Have a full stock firmware package available (just in case) [sammobile.com or samsung-updates.com]
2. Have Samsung USB drivers installed on Windows PC (Easiest way is DL KIES from Samsung)
3. Flash via Odin [I used Odin3 v3.07 - attachment] in PDA, as per Chainfire's instructions !
** If unsure how to use Odin, there are many guides found by searching !
4. Wait around 30 secs after flash (stuck on boot screen), and hopefully device will boot.
5. Open SuperSU app and update SU if prompted
.
Click to expand...
Click to collapse
Can N9150 use this?
Sent from my GT-I9505 using XDA Free mobile app
vongkachon said:
Can N9150 use this?
Sent from my GT-I9505 using XDA Free mobile app
Click to expand...
Click to collapse
As your device isn't yet listed in Chainfire's thread, I have no idea if any of the official CF-Auto-Root would be compatible. If you were to risk your device, you would look for a Snap Dragon one, but I would not recommend to those who can't afford the risk. EDIT: Without having the official stock firmware package available, I WOULD NOT TRY IT.
If your device isn't yet supported, maybe see if your firmware package is available at sammobile.com or samsung-updates.com , download and extract the recovery.img . Then upload the recovery.img to Chainfire's main XDA thread (link in OP) and ask nicely if he can spend the time to support your device I there is nothing, maybe contact one of those sites and politely request
mmm, tried it on the N915G with the appropriate files being (CF-Auto-Root-tblte-tbltedt-smn915g) but no luck on rooting so far. Initially I thought it could be me being silly with drivers and ODIN versions, tried a few drivers and ODIN versions but same outcome. Was stuck at NAND: write failure after what appears to be an attempt to write in recovery, then cache, even after a few tries [being full disconnect,restart in download mode and re-flash]. No issues restoring to store firmware (N915GXXU1ANJ3_N915GXSA1ANJ3_N915GXXU1ANJ3_HOME.tar.md5) though.
Any tips guys?
leekslk said:
mmm, tried it on the N915G with the appropriate files being (CF-Auto-Root-tblte-tbltedt-smn915g) but no luck on rooting so far. Initially I thought it could be me being silly with drivers and ODIN versions, tried a few drivers and ODIN versions but same outcome. Was stuck at NAND: write failure after what appears to be an attempt to write in recovery, then cache, even after a few tries [being full disconnect,restart in download mode and re-flash]. No issues restoring to store firmware (N915GXXU1ANJ3_N915GXSA1ANJ3_N915GXXU1ANJ3_HOME.tar.md5) though.
Any tips guys?
Click to expand...
Click to collapse
You might want to drop a post in Chainfire main XDA thread to let him know it's not working. He seems really busy, so that's of he monitors that thread anymore.
Nothing official, there might be something unofficial using Note 4 method. There is always risk to remember though.
Probably dumb question: will this also reset the device?
wilbur4321 said:
Probably dumb question: will this also reset the device?
Click to expand...
Click to collapse
If you mean "factory" reset, no it won't. Knox counter is covered in OP.
UpInTheAir said:
If you mean "factory" reset, no it won't. Knox counter is covered in OP.
Click to expand...
Click to collapse
Thanks. Not too worried about Knox. Hopefully that won't change after tmobile gets my note3 with Knox tripped back, though.
Does anyone have an extracted version of the SM-N915S rom? I was looking for few apks from that one. I installed some files from the TMO version on to my phone and it has messed up certain functions.
Thanks in advance!
[Official Lollipop 5.1.1] P600 DOJ3 (Mega & Android File Host) Fast Link + Easy Root
Galaxy Note 10.1 2014 (Wi-Fi) (SM-P600) from region PHE!
Firmware Version Info
(PDA: P600XXUDOJ3 CSC: P600OXADOJ3 CHANGELIST: 6086244 BUILD DATE: 23.10.2015)
It's not rooted and is untoched. It's completely stock!!!
I know others have made posts but they all use ****ty servers. I have uploaded this to Mega and Android File Host as they are both faster and more stable then pony Samsung's crappy servers.
When you flash rom with the setup as in picture it will flash over your previous rom and keep all data and apps and settings.
For maximum stability i recommend after first boot you do factory reset.
SM-P600 Note 10.1 Stock 5.1.1 Rom - Mega: https://mega.nz/#!2x5nmQob
Decription Key : !FU4t1X41UjV9kGmGkw8f-ZxomeyD13nbhL4FqV82AiI
Odin 3.07- Mega : https://mega.nz/#!CsJBQLhR
Decription key : !aSakzROgYonQ-MuKH3vJ_veSxCPcZWElBfZJ6At9Q-4
SM-P600 Note 10.1 Stock 5.1.1 Rom - Android File Host : https://www.androidfilehost.com/?fid=24269982086987868
md5 - 4435246f2bf0620c7acc5406bf189e3a
Odin 3.07 - Android File Host : https://www.androidfilehost.com/?fid=24269982086987869
Rooting guide for 5.1.1 : http://forum.xda-developers.com/showthread.php?p=63637426
TWRP Link : https://dl.twrp.me/lt03wifiue/
[BETA][2015.10.10] SuperSU v2.52 - https://download.chainfire.eu/743/SuperSU/BETA-SuperSU-v2.52.zip
Wanam Xposed Framework & App - http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
All credit goes to the People running the posts I linked. I didn't do anything but bring it together in one post to save you time running around cyberworld
Easy Guide to Root :
1. Go to Rooting Guide - http://forum.xda-developers.com/showthread.php?p=63637426
Download only the P600 modded boot IMG and then come back here. Move the tar to tablet. "In my opinion that guide is very confusing" This is much more simple...
2. Go to TWRP - https://dl.twrp.me/lt03wifiue/
Download the img.tar This file you keep on pc to flash via Odin.
3. Go to SuperSU v2.52 Beta - https://download.chainfire.eu/743/Su...erSU-v2.52.zip
Download the zip. Move the zip to tablet.
4. Reboot the tablet into download mode and open Odin on the PC then connect the tablet to PC. In Odin click AP tab and locate the TWRP and uncheck Auto-Reboot then hit start. When done hold the power button + vol up button "the vol button furthest from power button" + home button til you see red writing on top right hand corner. This can take a while so don't panic just wait.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. When finished booting into TWRP pull Spen and click Install then find modded boot img "remember to switch between IMG & ZIP mode in the lower left hand corner" Now flash the boot img. Do not reboot just go back and switch back to ZIP mode and flash SuperSU when done reboot.
6. Wait for the boot to finish. You are now rooted.
I hope this makes it easy for you!!!
Extra Features :
Note 5 Feature "Screen Off App" - http://forum.xda-developers.com/showthread.php?p=62731428
I don't know if this info is important to anyone but if someone wants it then here it is :
This info is from "About Device"
Model number
SM-P600
Android version
5.1.1
Kernel version
3.4.39-6086244
[email protected] #1
Fri Oct 23 17:24:00 KST 2015
Build number
LMY47X.P600XXUDOJ3
SE for Android status
Enforcing
SEPF_SM-P600_5.1.1_0039
Fri Oct 23 18:04:15 2015
KNOX version
KNOX 2.4.1
Standard SDK 5.4.1
Premium SDK 2.4.1
Customization SDK 2.4.0
Container 2.4.1
CEP 2.0.1
OTP 1.1.1
SE for Android 2.3.0
SSO 2.4.1
TIMA 3.0
VPN 2.2.0
Zionator said:
Galaxy Note 10.1 2014 (Wi-Fi) (SM-P600) from region PHE!
Firmware Version Info
(PDA: P600XXUDOJ3 CSC: P600OXADOJ3 CHANGELIST: 6086244 BUILD DATE: 23.10.2015)
It's not rooted and is untoched. It's completely stock!!!
I know others have made posts but they all use ****ty servers. I have uploaded this to Mega and Android File Host as they are both faster and more stable then pony Samsung's crappy servers.
When you flash rom with the setup as in picture it will flash over your previous rom and keep all data and apps and settings.
For maximum stability i recommend after first boot you do factory reset.
SM-P600 Note 10.1 Stock 5.1.1 Rom - Mega: https://mega.nz/#!2x5nmQob
Decription Key : !FU4t1X41UjV9kGmGkw8f-ZxomeyD13nbhL4FqV82AiI
Odin 3.07- Mega : https://mega.nz/#!CsJBQLhR
Decription key : !aSakzROgYonQ-MuKH3vJ_veSxCPcZWElBfZJ6At9Q-4
SM-P600 Note 10.1 Stock 5.1.1 Rom - Android File Host : https://www.androidfilehost.com/?fid=24269982086987868
md5 - 4435246f2bf0620c7acc5406bf189e3a
Odin 3.07- Android File Host : https://www.androidfilehost.com/?fid=24269982086987869
If you want root then there is a post here offering that ROOT : http://forum.xda-developers.com/galaxy-note-10-2014/general/root-root-stock-kernel-t3240218
Click to expand...
Click to collapse
Thank you. And did you root it successfully? I cannot flash a twrp.
What about region
Whats the difference if my region is not this and i update?
Thank you for links. I wonder what if I install it over 4.3 instead of 4.4.2. Is there any difference?
iopxiang said:
Thank you. And did you root it successfully? I cannot flash a twrp.
Click to expand...
Click to collapse
Not yet I will wait a few days to do anything as I just want to see how it works and the battery life on stock. Then I will root and remove many system bloatware apps and see the difference.
rbaleiro said:
Whats the difference if my region is not this and i update?
Click to expand...
Click to collapse
This is the Spanish region but I live in UK and at the very first setup screen I chose UK language so it don't really matter about the region as there is no modem. This device is just WiFi so region makes no difference.
chengineer said:
Thank you for links. I wonder what if I install it over 4.3 instead of 4.4.2. Is there any difference?
Click to expand...
Click to collapse
You are welcome. Well I flashed this over a custom rom Hyperdrive 4.4.2 and then once it booted I then factory reset it. Before I factory reset the device it was fine I just like the fresness of roms.
So the answer to your question is I don't know but I don't think it will make a difference as the bootloader is in the rom and will be flashed automatically with the rom. I came from 4.4.2 so I cannot speak about 4.3 but I assume it will be the same result.
Sent from my SM-N920C using Tapatalk
Thanks, Ill install too and see what happens!
Just installed! It's running very smoothly. I just realised that they don't have the internal game lollipop when u push the version of the OS. Lol!
rbaleiro said:
Thanks, Ill install too and see what happens!
Click to expand...
Click to collapse
You're welcome.
rbaleiro said:
Just installed! It's running very smoothly. I just realised that they don't have the internal game lollipop when u push the version of the OS. Lol!
Click to expand...
Click to collapse
Yes I have been waiting for this lollipop for ages now. Just hope someone cooks up a lovely custom rom soon ?
Sent from my SM-N920C using Tapatalk
Thank you so much for taking time to write each step in details. This made life so easier. You are right the other guide is little complicated. I was not aware that touch does not work in twrp also was not unchecking auto root. But then I came across your guide and believe me it's so easy. Thanks again, I rooted successfully.
vinayburman said:
Thank you so much for taking time to write each step in details. This made life so easier. You are right the other guide is little complicated. I was not aware that touch does not work in twrp also was not unchecking auto root. But then I came across your guide and believe me it's so easy. Thanks again, I rooted successfully.
Click to expand...
Click to collapse
Touch (as well as all other functions) works in twrp 2.8.6
Sent from my SM-P600 using XDA Free mobile app
I can't thank you enough. I flashed 5.1.1 yesterday and everything was working fine, but I was really missing root. I could NOT wrap my head around the root process as described in the other posts. Nothing against all their hard work, I'm just slow. Your step by step was so easy to follow! Now I'm rooted and happy. Thanks!!
Guys, a question.
If i want to clean install Lollipop with full wipes using Odin on the SM-P601, which is currently on the UAE csc, using the INU csc, what are the steps i should follow.?
And if i factory reset using the recovery, will all my files in the internal storage get deleted.?
Any help would be appreciated.
Thanks. ☺
Will it work i have 5.0.1 one on my phone
countryboy1000000 said:
Will it work i have 5.0.1 one on my phone
Click to expand...
Click to collapse
Yes, it should, even you have custom rom.
---------- Post added at 06:02 PM ---------- Previous post was at 05:59 PM ----------
amey2606 said:
Guys, a question.
If i want to clean install Lollipop with full wipes using Odin on the SM-P601, which is currently on the UAE csc, using the INU csc, what are the steps i should follow.?
And if i factory reset using the recovery, will all my files in the internal storage get deleted.?
Any help would be appreciated.
Thanks.
Click to expand...
Click to collapse
Yes, factory reset is like you just brought the tablet from the store.
vinayburman said:
Thank you so much for taking time to write each step in details. This made life so easier. You are right the other guide is little complicated. I was not aware that touch does not work in twrp also was not unchecking auto root. But then I came across your guide and believe me it's so easy. Thanks again, I rooted successfully.
Click to expand...
Click to collapse
You are welcome. I am glad you got it rooted. First thing I did was debloating like a mad man hehe.
Then exposed and now I am gonna try and find working themes for it ?
Sent from my SM-N666F "Special Edition"
Any idea if the root will work on P605 too? It's got 5.1.1 as well and I'm pretty excited to get on it. However, not may people are discussing about it.
Thanks for the guide btw!
MasK said:
Any idea if the root will work on P605 too? It's got 5.1.1 as well and I'm pretty excited to get on it. However, not may people are discussing about it.
Thanks for the guide btw!
Click to expand...
Click to collapse
Yes it will work if u download the 605 rom and then from root post download the modded boot image for 605 if available and last thing get TWRP for 605 as well.
Do as described in my guide and apart from what I said above the rest is universal meaning that supersu and closed are the same for all versions.
Sent from my SM-P600 using Tapatalk
for sm-p601
Can you please give a link for sm-p601 too
Zionator said:
4. Reboot the tablet into download mode and open Odin on the PC then connect the tablet to PC. In Odin click AP tab and locate the TWRP and uncheck Auto-Reboot then hit start. When done hold the power button + vol up button "the vol button furthest from power button" + home button til you see red writing on top right hand corner. This can take a while so don't panic just wait.
Click to expand...
Click to collapse
as I held these three buttons, I watched as the Samsung note splash screen flickered and restarted over and over. I held for about 10 minute and gave up after my hands got tired. After that, I couldn't get past the splash screen and had to do a straight ROM via ODIN.....can I still root? What was I doing wrong??