[Q] [Help] Galaxy s4 brick - Galaxy S 4 Q&A, Help & Troubleshooting

Hi everyone
I have a problem with my Samsung Galaxy S4 I9505 and its that it doesn´t pass from the Samsung logo
I tried to flash a custom rom from the recovery mode but it only says "faild" so after that I tried to wipe
cache and system partitions and I did a Factory reset on the recovery mode and nothing it still staying
on the samsung logo I also tried to flash a stock rom with ODIN and it only says the following log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505VJUEMKE_I9505UUBEMKE_I9505VJUEMKE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I dont know what more I can do please help me and from now a lot of thanks and sorry if I had some grammar mistake I am practicing my English

Honter1 said:
Hi everyone
I have a problem with my Samsung Galaxy S4 I9505 and its that it doesn´t pass from the Samsung logo
I tried to flash a custom rom from the recovery mode but it only says "faild" so after that I tried to wipe
cache and system partitions and I did a Factory reset on the recovery mode and nothing it still staying
on the samsung logo I also tried to flash a stock rom with ODIN and it only says the following log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505VJUEMKE_I9505UUBEMKE_I9505VJUEMKE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I dont know what more I can do please help me and from now a lot of thanks and sorry if I had some grammar mistake I am practicing my English
Click to expand...
Click to collapse
Hi there Follow the tutorial from this thread http://forum.xda-developers.com/showpost.php?p=41072377&postcount=1 Have a nice day.

Related

Galaxy S4 i9505 won't

Hi all,
I was running an official ROM (MI8) and I tried to root it, of course it went wrong
Now I'm getting the "Firmware Upgrade encountered an issue" error message while booting. I have tried to facyory reset with kies and it does work (after downloading the firmware it says it doesnt recognize the phone)
I have access Download Mode, I have tried to push offical fw's with oding , no luck I get :
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMJ5_I9505OXAEMJ5_I9505XXUEMJ5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
does anyone have an idea ?
PS : sorry for the topic title, Cant edit anymore, will have to wait for a couple of minutes
Different usb port, different pc, different usb cable, reinstall drivers, make sure Kies is not running in the background.
Thanks it worked
Sorry for another stupid thread like this I was under panic lol
Sent from my GT-I9505 using xda app-developers app

[Q] Rooted phone, tried to to QBKing hotspot now stuck in bootloop.

Hello everyone,
I used QBKing to root my phone then I tried to do the hotspot mod, and more then likely used the incorrect odex file and have tried 4 different sprint ROM's to reset the firmware with Odin but to no avail.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is what Odin keeps saying, I can't get past here!
I appreciate all help and thank you in advance.
Flash this. You must be on MJA
http://www.rwilco12.com/downloads.php?dir=Files/Devices/Samsung Galaxy S4 (SPH-L720)/Stock ROMs/MJA
Sent from my SPH-L720 using Tapatalk

Can't flash any ROMs, Odin keeps showing Fail

I've successfully flashed many ROMs to the device before this.
I'm in download mode.
I've tried to flash:
I9505XXUFNB8_I9505BTUFNB3_BTU
I9505XXUEMJ5_I9505OXAEMJ5_DBT
... in ...
Odin3-v1.85, Odin3_v3.04, Odin3_v3.07, Odin3_v3.09
They all fail very quickly.
When I restart my phone without booting into download mode, I get the "Frmware upgrade encountered an issue." message.
Odin shows:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMJ5_I9505OXAEMJ5_I9505XXUEMJ5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?
I'd really prefer not to wipe the phone if I can help it.
I've heard I may need to flash a PIT?
King Mustard said:
I've successfully flashed many ROMs to the device before this.
I'm in download mode.
I've tried to flash:
I9505XXUFNB8_I9505BTUFNB3_BTU
I9505XXUEMJ5_I9505OXAEMJ5_DBT
... in ...
Odin3-v1.85, Odin3_v3.04, Odin3_v3.07, Odin3_v3.09
They all fail very quickly.
When I restart my phone without booting into download mode, I get the "Frmware upgrade encountered an issue." message.
Odin shows:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMJ5_I9505OXAEMJ5_I9505XXUEMJ5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?
I'd really prefer not to wipe the phone if I can help it.
I've heard I may need to flash a PIT?
Click to expand...
Click to collapse
try other usb port
I9505XXUEMJ5_I9505OXAEMJ5_I9505XXUEMJ5_HOME.tar.md5 is android 4.3. And for sure u flashed android 4.4.2 before. You cant flash android 4.3 having in your phone android 4.4.2. And pls dont open other post if you have other opened and you dont wanna do what I was telling ya before. My help finished. Ciao :fingers-crossed:

[Q] Trying to root S4

So i've tried a few ways to root my galaxy s4 running 4.4.2 but when i try it will say flash failed or in odin 3 it says
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas what to do from here?
darksmite653 said:
Any ideas what to do from here?
Click to expand...
Click to collapse
Yeah. Go to S4 forum and ask there because your problem has nothing to do with Omni.
chasmodo said:
Yeah. Go to S4 forum and ask there because your problem has nothing to do with Omni.
Click to expand...
Click to collapse
ok sorry, i couldent find it at the time, its my first post
darksmite653 said:
So i've tried a few ways to root my galaxy s4 running 4.4.2 but when i try it will say flash failed or in odin 3 it says
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas what to do from here?
Click to expand...
Click to collapse
By doing this method, you run the risk of tripping knox 0x1 which will definitely void your warranty. If you want to root without triggering it, try towelroot.

[Q] Help!! I think my phone got brick

Hello i was running CM 11 on my gt-i9500 then i installed the alpha i think it was chinese of lolipop 5.0 stock version
yesterday sammobile released official version russian of 5.0 so i downloaded it , and i think something went wrong because this message show when i turn on my phone Firmware upgrade encountered an issue please select recovery mode in kies and try again
i tried every thing flashing old stock new stock using recover and all things every time i try to install it using odin tried most version of odin
it give me fail in system this msg show
and i tried removed kies and installation tried while its on and while its off !!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHOA7_I9500SERHOA7_I9500XXUHOA7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
Please HELP FAST!!

Categories

Resources