Hello everyone,
I used QBKing to root my phone then I tried to do the hotspot mod, and more then likely used the incorrect odex file and have tried 4 different sprint ROM's to reset the firmware with Odin but to no avail.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is what Odin keeps saying, I can't get past here!
I appreciate all help and thank you in advance.
Flash this. You must be on MJA
http://www.rwilco12.com/downloads.php?dir=Files/Devices/Samsung Galaxy S4 (SPH-L720)/Stock ROMs/MJA
Sent from my SPH-L720 using Tapatalk
Related
Hi everyone
I have a problem with my Samsung Galaxy S4 I9505 and its that it doesn´t pass from the Samsung logo
I tried to flash a custom rom from the recovery mode but it only says "faild" so after that I tried to wipe
cache and system partitions and I did a Factory reset on the recovery mode and nothing it still staying
on the samsung logo I also tried to flash a stock rom with ODIN and it only says the following log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505VJUEMKE_I9505UUBEMKE_I9505VJUEMKE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I dont know what more I can do please help me and from now a lot of thanks and sorry if I had some grammar mistake I am practicing my English
Honter1 said:
Hi everyone
I have a problem with my Samsung Galaxy S4 I9505 and its that it doesn´t pass from the Samsung logo
I tried to flash a custom rom from the recovery mode but it only says "faild" so after that I tried to wipe
cache and system partitions and I did a Factory reset on the recovery mode and nothing it still staying
on the samsung logo I also tried to flash a stock rom with ODIN and it only says the following log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505VJUEMKE_I9505UUBEMKE_I9505VJUEMKE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I dont know what more I can do please help me and from now a lot of thanks and sorry if I had some grammar mistake I am practicing my English
Click to expand...
Click to collapse
Hi there Follow the tutorial from this thread http://forum.xda-developers.com/showpost.php?p=41072377&postcount=1 Have a nice day.
I've successfully flashed many ROMs to the device before this.
I'm in download mode.
I've tried to flash:
I9505XXUFNB8_I9505BTUFNB3_BTU
I9505XXUEMJ5_I9505OXAEMJ5_DBT
... in ...
Odin3-v1.85, Odin3_v3.04, Odin3_v3.07, Odin3_v3.09
They all fail very quickly.
When I restart my phone without booting into download mode, I get the "Frmware upgrade encountered an issue." message.
Odin shows:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMJ5_I9505OXAEMJ5_I9505XXUEMJ5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?
I'd really prefer not to wipe the phone if I can help it.
I've heard I may need to flash a PIT?
King Mustard said:
I've successfully flashed many ROMs to the device before this.
I'm in download mode.
I've tried to flash:
I9505XXUFNB8_I9505BTUFNB3_BTU
I9505XXUEMJ5_I9505OXAEMJ5_DBT
... in ...
Odin3-v1.85, Odin3_v3.04, Odin3_v3.07, Odin3_v3.09
They all fail very quickly.
When I restart my phone without booting into download mode, I get the "Frmware upgrade encountered an issue." message.
Odin shows:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMJ5_I9505OXAEMJ5_I9505XXUEMJ5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?
I'd really prefer not to wipe the phone if I can help it.
I've heard I may need to flash a PIT?
Click to expand...
Click to collapse
try other usb port
I9505XXUEMJ5_I9505OXAEMJ5_I9505XXUEMJ5_HOME.tar.md5 is android 4.3. And for sure u flashed android 4.4.2 before. You cant flash android 4.3 having in your phone android 4.4.2. And pls dont open other post if you have other opened and you dont wanna do what I was telling ya before. My help finished. Ciao :fingers-crossed:
So i've tried a few ways to root my galaxy s4 running 4.4.2 but when i try it will say flash failed or in odin 3 it says
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas what to do from here?
darksmite653 said:
Any ideas what to do from here?
Click to expand...
Click to collapse
Yeah. Go to S4 forum and ask there because your problem has nothing to do with Omni.
chasmodo said:
Yeah. Go to S4 forum and ask there because your problem has nothing to do with Omni.
Click to expand...
Click to collapse
ok sorry, i couldent find it at the time, its my first post
darksmite653 said:
So i've tried a few ways to root my galaxy s4 running 4.4.2 but when i try it will say flash failed or in odin 3 it says
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas what to do from here?
Click to expand...
Click to collapse
By doing this method, you run the risk of tripping knox 0x1 which will definitely void your warranty. If you want to root without triggering it, try towelroot.
So i've tried a few ways to root my galaxy s4 running 4.4.2 but when i try it will say flash failed or in odin 3 it says
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas what to do from here?
Rooted my S4 successfully using Geohot's Towelroot. Took less than 10 seconds.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
You need to study up on the threads:
All things ATT, MK2 etc in General
Hashcodes SafeStarp in Dev section
:good::good:
I was rooting the new 5.0.2 update and as i was doing it there a error i think the code was 1 but i am not 100% sure. as soon as i started the odin process and then it froze and i cant get the tablet to go out of Odin mode and i tried flashing the orignal rom and it didnt work.
the processes:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T530NUOVU1BOJ2_T530NUBNN1BOJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i have no idea why this is happening and i need to get out of odin very fast (because need the info on it)
can someone help please
Hi,
Thanks for using XDA assist.
Your thread will be moved to the Galaxy Tab 4 Q&A, Help & Troubleshooting forum for specialized help. There are experts there who can help you out.
Good Luck! - gsstudios
Your firmware might be corrupted, try redownloading the 4.4.2 version then update it to 5.0.2. I also guess twrp method does not work on 5.x.x firmwares on tab 4