[Update] [Official] 4.2.2 rom for Galaxy Grand - Galaxy Grand Duos i9082 General

Official 4.2.2 Upgrade to the Galaxy Grand
Things you need:
Data Cable
Battery More than 85%
Steps:
1. First Download the update from here
2. Then download Odin
3. Extract the zip into a Folder
4. Install odin and open it
5. Switch off the Phone and Enter to the Downloading Mode by pressing Volume Down+Home Key+Power Button
6. When the warning Screen appear Continue by Pressing the Specific Volume Key
7. Click PDA in Odin and browse and select the MD5 file from the extracted Folder
8. Connect the USB Cable to the phone and Message Box in Odin Will show up a message "Added"
9. Make sure only Auto boot and F.Reset Time is ticked not the others especially the Re-partion one is UNTICKED.
10. Click Start and wait till the Update is installed.
voilà you have successfully updated to JB 4.2.2
Note: Sometimes after you add MD5 into odin or when you press start it may seems like stucked DO NOT DO ANYTHING just watch and it will work.. Dont worry at all cuz i have done this twice after installing two custom roms.. I totally Recommend you dont do anything while the update
is Running..
Hit thanks button If i helped.. :good:

What is this, Samsung's official firmware? there are dozens of thread in the general section about this.

naufalhadyan said:
What is this, Samsung's official firmware? there are dozens of thread in the general section about this.
Click to expand...
Click to collapse
Yup..... This is the Official Firmware which samsung released not any custom rom... So have no worries....

Update file is not on the Web site please upload the file I want this firmware please bro
Sent from my GT-I9082 using XDA Premium 4 mobile app

lahirunc said:
Yup..... This is the Official Firmware which samsung released not any custom rom... So have no worries....
Click to expand...
Click to collapse
The actual thing naufalhadyan wanted to say is that why u sharing a firmware while there's are already hell of forums giving links for proper firmwares with mirrors !!..
If it is a new firmware then that's okay..but if u sharing an old firmware of 4.2.2 than just a duplicate forum is considered as spam on xda...be aware of that !!!.. Sorry if rude..just telling u
Sent from my GT-I9082 using Tapatalk

Edit: the latest firmware for galaxy grand is for Egypt,Saudi Arabia...firmware links are i supoose already shared on galazy grand forums...last firmware was of Egypt which was declared laggy by many users.....
Screenshots attached!.
Sent from my GT-I9082 using Tapatalk

Guys sorry for the inconvenience i will check on the download link error and let you guys know please bear with me ... Thank you
@raghavsharmaxda please be updated the fact that this aint laggy im currently using it plus their aint a working link which hasnt blovked or removed on 4.2.2 JB update for grand other than custom roms soo please be updated before you say something... Thank you! Have a nice day

The Link is working now!!

nice share dude... thanks... :good:

you are welcome bro!! Please be kind enough to hit the thanks button...
Have a nice day!

Wants new on this firmware?
Sent from my GT-I9082 using XDA Premium 4 mobile app

well you'll notice that your status drop bar have more options than 4.1.2 and when you look around you see settings are arranged into tabs as Connections, My device, Accounts and more even more much faster and does use ram more efficiently plus small amount of enhancement of performance on the device.

Please update download link not working

Related

Latest N7000 rom online XXKL8!!

Samsung N7000 Firmware: N7000XXKL8_N7000KL8_OXA Online!
Download
http://hotfile.com/dl/139507266/ddddd08/N7000_XXKL8.rar.html
Pass.
samfirmware.com
Source.
www.SamMobile.com/firmware/
Date.
December 2011
Android.
Android 2.3.6
congrats !
Waiting for changelog.
Can this be installed on a non rooted phone
Sent from my GT-N7000 using xda premium
i have downloaded but there is so much files..flash this trough odin?
i see files that i cant select in odin like efs kernel...
dogan2010 said:
i have downloaded but there is so much files..flash this trough odin?
i see files that i cant select in odin like efs kernel...
Click to expand...
Click to collapse
same question, can somebody help us to flash with odin? what files and where i have to put them? i usually use only PDA and im new
you have just one time extracted ? or two time?
give details of file
Thread closed
Please continue development discussion here.

[Firmware][Odin]Firmware Collection For The Samsung Galaxy note 8.0 N5100.

Firmware Collection For The Samsung Galaxy Note 8.0 N5100 Odin Flashable .​
Spain: N5100XXBMD1_N5100OXXBMD1_PHE.zip
Luxemburg: N5100XXBMD1_N5100LUXBMD1_LUX.zip
Hungary (Telenor): N5100XXBMD1_N5100PANBMD1_PAN.zip
India: N5100DDBMC9_N5100ODDBMC8_INU.zip​
How to Install :
Download ODIN From ChainFire {Special thanks}
Then DownLoad The Firmware.
Unpack And you will get .tar.md5 file and a .dll file.
Then Switch off the phone and put it on the Download Mode. To do this, press Volume Down + Home + Power buttons and then press Volume Up when the warning message appears.
Run Odin v3.07.exe as an Administrator.
Connect Device.
If the phone is connected properly, you will see that the ID: COM section turns Yellow and a message will appear in Odin’s message box saying “Added!!” If not, check whether the USB drivers are installed properly in your computer.
In Odin, click on PDA and select the .tar.md5 file that you have got after extracting the Firmware Package
In the Odin, make sure that Auto Reboot and F. Reset Time checkboxes are selected. If you are using a .pit file, ensure that re-partition checkbox is selected. Otherwise, leave it unchecked.
Click on the Start button in Odin to begin the installation process.
After the installation is complete, the device will restart on its own. Once you get the Samsung logo on the home screen, unplug the device from the computer.
Thanks For SamsungFor Giving Me the Leaked Firmwares
Pleaze Hit The Thanks Button ​
[/CENTER]
Reserved
Good
Your tutorial is just perfect thanks man
Hit the thanks button
Sent from my GT-N7100 using xda premium
This should be moved into the Android development Thread.
Accualy no because yesterday i posted on s4 forums firmware on android development thread ot was moved to here
Yhanks button on first post please
Sent from my GT-N7100 using xda premium
S.a.M.e.R_d said:
Accualy no because yesterday i posted on s4 forums firmware on android development thread ot was moved to here
Yhanks button on first post please
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
ok! Just thought like you that in other forums this is always s in the Android Development.
Thanks for your Work!
any chance of getting a USA version?
edit: are the cellular south ones USA? didn't know because...wifi, cellular, don't want to brick.
jdblaze said:
any chance of getting a USA version?
edit: are the cellular south ones USA? didn't know because...wifi, cellular, don't want to brick.
Click to expand...
Click to collapse
I will investihated and reply
Sent from my GT-I9500 using xda premium
S.a.M.e.R_d said:
Firmware Collection For The Samsung Galaxy Note 8.0 N5100 Odin Flashable .​
Spain: N5100XXBMD1_N5100OXXBMD1_PHE.zip
Luxemburg: N5100XXBMD1_N5100LUXBMD1_LUX.zip
Hungary (Telenor): N5100XXBMD1_N5100PANBMD1_PAN.zip
India: N5100DDBMC9_N5100ODDBMC8_INU.zip​
How to Install :
Download ODIN From ChainFire {Special thanks}
Then DownLoad The Firmware.
Unpack And you will get .tar.md5 file and a .dll file.
Then Switch off the phone and put it on the Download Mode. To do this, press Volume Down + Home + Power buttons and then press Volume Up when the warning message appears.
Run Odin v3.07.exe as an Administrator.
Connect Device.
If the phone is connected properly, you will see that the ID: COM section turns Yellow and a message will appear in Odin’s message box saying “Added!!” If not, check whether the USB drivers are installed properly in your computer.
In Odin, click on PDA and select the .tar.md5 file that you have got after extracting the Firmware Package
In the Odin, make sure that Auto Reboot and F. Reset Time checkboxes are selected. If you are using a .pit file, ensure that re-partition checkbox is selected. Otherwise, leave it unchecked.
Click on the Start button in Odin to begin the installation process.
After the installation is complete, the device will restart on its own. Once you get the Samsung logo on the home screen, unplug the device from the computer.
Thanks For SamsungFor Giving Me the Leaked Firmwares
Pleaze Hit The Thanks Button ​
[/CENTER]
Click to expand...
Click to collapse
Are there real peculiar differences between these firmwares; if yes, could you kindly mention a few. Thanks.
Sent from my GT-N5100 using xda premium
rosrog said:
Are there real peculiar differences between these firmwares; if yes, could you kindly mention a few. Thanks.
Sent from my GT-N5100 using xda premium
Click to expand...
Click to collapse
Nope But these are leaked you aint gonna find them on sammobile or samsung updates
S.a.M.e.R_d said:
Nope But these are leaked you aint gonna find them on sammobile or samsung updates
Click to expand...
Click to collapse
the Indian one lacks the watchon app and has Samsung Indian keyboard for native language input.
Sent from my GT-N5100 using XDA Premium HD app
why this thread?
here all ROM http://www.sammobile.com/firmwares/
Yes, the Cellular South firmware is the US wifi version of this device. The country code for US devices is XAR and Samsung crosswalks that code to the words "cellular south" rather than "US" on many firmware sites, I don't know why.
YOU WANT TO JOIN KINGCOBRA TEAM ?
PLEASE FEAL FREE TO FILL THIS APPLICATION
https://docs.google.com/forms/d/1oP7sYBgk6XXgMg_6aqtjHGrgV5ZuwGnlSG3GvUghFAU/viewform

HELP My GS4 GT-i9500 can't upgrade firmware?

Hi guys, u am using my new GS4 for couple of weeks and i now want to upgrade to the latest version of firmware for GT-i9500
but there's no update rolled out OTA for my S4 because i waited so long for it. and decided using PC KIES but it says
new firmware available for my device
and i proceed to upgrade the process i consuming lot of times! and finally when my device shows the DOWNLOADING! with Android Logo
the PC popped up with says that it can't recognize my DEVICE!
very bad i tried again... by the instruction from the popup and second time also like that!... wasted most of my time
please help in this case.
i am very new to Samsung Devices i have no experience using it...
My GS4 is very pure no ROOT! and CUSTOM ROM! mine is fresh.
95mediatech said:
Hi guys, u am using my new GS4 for couple of weeks and i now want to upgrade to the latest version of firmware for GT-i9500
but there's no update rolled out OTA for my S4 because i waited so long for it. and decided using PC KIES but it says
new firmware available for my device
and i proceed to upgrade the process i consuming lot of times! and finally when my device shows the DOWNLOADING! with Android Logo
the PC popped up with says that it can't recognize my DEVICE!
very bad i tried again... by the instruction from the popup and second time also like that!... wasted most of my time
please help in this case.
i am very new to Samsung Devices i have no experience using it...
My GS4 is very pure no ROOT! and CUSTOM ROM! mine is fresh.
Click to expand...
Click to collapse
http://samsung-updates.com/device/?id=GT-I9500
Go to the link find the firmware of us and flash it using odin
U can get odin just Google it 3.07 version will do
Sent from my GT-I9500 using xda premium
Thanks i found the Firmware for my country and what need to tick and what do not tick in ODIN?
i really never used ODIN tool before. thanks
Try this if you like Kies
95mediatech said:
Hi guys, u am using my new GS4 for couple of weeks and i now want to upgrade to the latest version of firmware for GT-i9500
but there's no update rolled out OTA for my S4 because i waited so long for it. and decided using PC KIES but it says
new firmware available for my device
and i proceed to upgrade the process i consuming lot of times! and finally when my device shows the DOWNLOADING! with Android Logo
the PC popped up with says that it can't recognize my DEVICE!
very bad i tried again... by the instruction from the popup and second time also like that!... wasted most of my time
please help in this case.
i am very new to Samsung Devices i have no experience using it...
My GS4 is very pure no ROOT! and CUSTOM ROM! mine is fresh.
Click to expand...
Click to collapse
If you like to use Kies instead of Odin then you can disconnect your USB cable (phone) and go to Tools>Firmware Upgrade and Initialization and follow the instructions. You'll need to enter model number (case sensitive) like GT-I9500 and your mobile's serial number (from Settings>About Device).
95mediatech said:
Hi guys, u am using my new GS4 for couple of weeks and i now want to upgrade to the latest version of firmware for GT-i9500
but there's no update rolled out OTA for my S4 because i waited so long for it. and decided using PC KIES but it says
new firmware available for my device
and i proceed to upgrade the process i consuming lot of times! and finally when my device shows the DOWNLOADING! with Android Logo
the PC popped up with says that it can't recognize my DEVICE!
very bad i tried again... by the instruction from the popup and second time also like that!... wasted most of my time
please help in this case.
i am very new to Samsung Devices i have no experience using it...
My GS4 is very pure no ROOT! and CUSTOM ROM! mine is fresh.
Click to expand...
Click to collapse
95mediatech said:
Thanks i found the Firmware for my country and what need to tick and what do not tick in ODIN?
i really never used ODIN tool before. thanks
Click to expand...
Click to collapse
Just let it be. When you open ODIN then it will have only 2 ticks. Dont tick more then that. Then select PDA (i.e. .tar) file & Press Start. Don't unplug the device until you get clear Ext button.
Note: Do check whether your Mobile has been detected by ODIN (A Green column will be highlighted in left upper corner).
mssaleh said:
If you like to use Kies instead of Odin then you can disconnect your USB cable (phone) and go to Tools>Firmware Upgrade and Initialization and follow the instructions. You'll need to enter model number (case sensitive) like GT-I9500 and your mobile's serial number (from Settings>About Device).
Click to expand...
Click to collapse
thanks but anyway, I will try the odin first.
but this looks my data will be erased..
95mediatech said:
thanks but anyway, I will try the odin first.
but this looks my data will be erased..
Click to expand...
Click to collapse
No, this is actually a fail-safe way to upgrade your firmware in case the automatic Kies updater fails. You'll get to a step where you'll choose to factory reset or not, and you can always back up and restore data from Kies (you can back up before the whole upgrade process).
Odin is good, though. Basically the same thing. If you flash official ROM then your phone status will stay "Official" but the flash counter may increase. Kies method is official and will not threaten your warranty.
Disturbed™ said:
Just let it be. When you open ODIN then it will have only 2 ticks. Dont tick more then that. Then select PDA (i.e. .tar) file & Press Start. Don't unplug the device until you get clear Ext button.
Note: Do check whether your Mobile has been detected by ODIN (A Green column will be highlighted in left upper corner).
Click to expand...
Click to collapse
Thanks mate! Very useful I will try.
123hiten said:
http://samsung-updates.com/device/?id=GT-I9500
Go to the link find the firmware of us and flash it using odin
U can get odin just Google it 3.07 version will do
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
Thanks but the firmware file for my country
is whopping 1.5gb actually I read many posts
that says OTA are just about 350mb... and the file
are in .zip but odin need .tar format... ???
95mediatech said:
Thanks mate! Very useful I will try.
Thanks but the firmware file for my country
is whopping 1.5gb actually I read many posts
that says OTA are just about 350mb... and the file
are in .zip but odin need .tar format... ???
Click to expand...
Click to collapse
Yes correct it's a big file as lots of bloatware by Samsung and the OTA I is 343 mb
I would still suggest that download install and keep it even after flashing it I personally never trust KIES a stupid time waste waitng for it to complete
And ya even if u try doing thru KIES it myte take abt 3 hours as my friend took more then 4 hours having 1 mbps speed
And ya this won't increase a binary counter
Sent from my GT-I9500 using xda premium
---------- Post added at 06:43 PM ---------- Previous post was at 06:40 PM ----------
95mediatech said:
Thanks mate! Very useful I will try.
Thanks but the firmware file for my country
is whopping 1.5gb actually I read many posts
that says OTA are just about 350mb... and the file
are in .zip but odin need .tar format... ???
Click to expand...
Click to collapse
And ya that. Zip file u need to extract u ll have a . tar there
Sent from my GT-I9500 using xda premium
123hiten said:
Yes correct it's a big file as lots of bloatware by Samsung and the OTA I is 343 mb
I would still suggest that download install and keep it even after flashing it I personally never trust KIES a stupid time waste waitng for it to complete
And ya even if u try doing thru KIES it myte take abt 3 hours as my friend took more then 4 hours having 1 mbps speed
And ya this won't increase a binary counter
Sent from my GT-I9500 using xda premium
---------- Post added at 06:43 PM ---------- Previous post was at 06:40 PM ----------
And ya that. Zip file u need to extract u ll have a . tar there
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
Thanks very much mate! For your valuable information the kies is very bad... it tooks me 1.5 hour per season. .. I tried 2 times to upgrade my s4 but still not successful. Hmmm
I will definitely try download and flash it using ODIN. Sorry if I'm writing too much because I am absolutely noob to Samsung device.
One more thing? Its that the phone recovery in the kies are reliable? In case of brick or something how can I revive it.
Thank in advance
Sent from my GT-I9500 using xda app-developers app
95mediatech said:
Thanks very much mate! For your valuable information the kies is very bad... it tooks me 1.5 hour per season. .. I tried 2 times to upgrade my s4 but still not successful. Hmmm
I will definitely try download and flash it using ODIN. Sorry if I'm writing too much because I am absolutely noob to Samsung device.
One more thing? Its that the phone recovery in the kies are reliable? In case of brick or something how can I revive it.
Thank in advance
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
U don't need to use recovery u download the firmware and flash all be fine
Sent from my GT-I9500 using xda premium
Thanks I will post here after I successfully update my firmware.
Sent from my GT-I9500 using xda app-developers app
Disturbed™ said:
Just let it be. When you open ODIN then it will have only 2 ticks. Dont tick more then that. Then select PDA (i.e. .tar) file & Press Start. Don't unplug the device until you get clear Ext button.
Note: Do check whether your Mobile has been detected by ODIN (A Green column will be highlighted in left upper corner).
Click to expand...
Click to collapse
Hi,do i need to put my device to Download mode prior to flashing?
123hiten said:
http://samsung-updates.com/device/?id=GT-I9500
Go to the link find the firmware of us and flash it using odin
U can get odin just Google it 3.07 version will do
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
which version for Italy ,at the moment I have: i9500xxuamdx it's oldest is it ?
tks gio

[ROOTGUIDE][OFFICIAL][STOCKROM] N8000XXUDNE4 KitKat (4.4.2)

ROOT GUIDE OFFICIAL STOCKROM N8000XXUDNE4 KitKat (4.4.2)
First Step Root Using PhilZ CWM
1.) Download Odin
2.) PhilZ CWM Advanced Editition 6.41.6-n8000.tar.md5
3.) Open Odin v3.09
Reboot tablet in Download Mode (press and hold Power + Volume Down buttons)
Connect tablet and wait until you get a blue sign in Odin
Add the philz_touch_6.41.6-n8000.tar.md5 file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, and ur tablet will reboot
4.) Boot your phone in Recovery Mode (Press and Hold Power Button + Volume Up)
in CWM go to Philz Settings > Re-Root System (SuperSU)
5.) Reboot your tablet and download SuperSU apps in PlayStore
2nd Step Root Using PhilZ CWM
1.) Download Odin
2.) PhilZ CWM Advanced Editition 6.41.6-n8000.tar.md5
3.) Download SuperSU v1.99 and Push it to your Internal or ExternalSD Card
4.) Open Odin v3.09
Reboot tablet in Download Mode (press and hold Power + Volume Down buttons)
Connect tablet and wait until you get a blue sign in Odin
Add the philz_touch_6.41.6-n8000.tar.md5 file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, and ur tablet will reboot
5.) Boot your tablet in Recovery Mode (Press and Hold Power Button + Volume Up)
in CWM go to Install Zip > Choose zip and locate SuperSU v1.99 and flash it... Reboot
Credits to PhilZ & Chainfire
thanks for your thread, but what and where is the offical KK thread now , every thread I find has been closed?
carl1961 said:
thanks for your thread, but what and where is the offical KK thread now , every thread I find has been closed?
Click to expand...
Click to collapse
it' been closed by moderator already
Yup don't understand why 1 of the moderator close all threads. as far as I know you are the 1st one who started a thread regarding the official firmware release. If ever your's is the 1 to be unlock so we can continue discussion regarding the official firmware.
filchi756 said:
Yup don't understand why 1 of the moderator close all threads. as far as I know you are the 1st one who started a thread regarding the official firmware release. If ever your's is the 1 to be unlock so we can continue discussion regarding the official firmware.
Click to expand...
Click to collapse
Search that moderator and you will see he shut a lot of threads down. With legit reasons, I am just still looking for the offial kk thread
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
carl1961 said:
Search that moderator and you will see he shut a lot of threads down. With legit reasons, I am just still looking for the offial kk thread
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
don't know if these 1 is the official 1 " http://forum.xda-developers.com/showthread.php?t=2016792 ". but the title is misleading. Its still referring to 4.1.2.Who would think it includes the 4.4.2 at the last 1 and half pages of that thread only..And the moderator should have given us a thread referring to as the official one,before or when he closed all those thread right?
filchi756 said:
don't know if its this 1 is the official 1 " http://forum.xda-developers.com/showthread.php?t=2016792 ". but the title is misleading. Its still referring to 4.1.2.Who would think it includes the 4.4.2 at the last 1 and half pages of that thread only..And the moderator should have given us a thread referring to as the official one,before or when he closed all those thread right?
Click to expand...
Click to collapse
The thread is for N8010 model not for N8000, I think
rasayan said:
The thread is for N8010 model not for N8000, I think
Click to expand...
Click to collapse
See that's what I meant.The title really is misleading right?that thread includes all variations of note 10.1 2012, just open the opening post.It only discuss the kitkat at the last 2 pages.
Please help can anyone upload this file in multiple parts I am unable to download the official stockrom kitkat from both the links
Thanks in advance
Sent from my GT-N8000 using XDA Premium 4 mobile app
Back to JB after KK update
I am looking for any possibility to comeback to JB rom on n8000 after KK update. Please help me.
hal-2010 said:
I am looking for any possibility to comeback to JB rom on n8000 after KK update. Please help me.
Click to expand...
Click to collapse
you need to have to re-flash the official 4.1.2 stock rom. download it here
german 4.4.2 also rootable?
I wonder, if the german version of the last android update is rootable with this guide.
My intention to ask is the second question, if I can downgrade after a root process to android version 4.1.2.
Thanks!
Dr.Sahnebacke said:
I wonder, if the german version of the last android update is rootable with this guide.
My intention to ask is the second question, if I can downgrade after a root process to android version 4.1.2.
Thanks!
Click to expand...
Click to collapse
Official kk roots this same way.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
this is perfect. Bravo SAMSUNG
Wifi and wifi hotspot not switching on after 4.4.2 update in gt n8000
hello, I updated my gt n8000 with 4.4.2 kitkat afterupdating I was trying to turn on wifi but it was not turning on. then I tried to turn on wifi hotspot but that too is not switching on .
please help
Hey Guys,
this root method is for 8010 too, right?
DonkeyShotter said:
Hey Guys,
this root method is for 8010 too, right?
Click to expand...
Click to collapse
honestly i dont have n8010 so can't test it, but it should be working fine since the only difference of n8000 and n8010 is the 3g.
N8000xxudne5
It Work for N8000XXUDNE5 ???
Tks
How to downgrade locked bootloader KK?
How to downgrade locked bootloader KK?
hal-2010 said:
How to downgrade locked bootloader KK?
Click to expand...
Click to collapse
No chance at the moment as far as I know ...
Markus.

N910f custom roms or deodexed stock

Is there any custom roms that keep all s pen functions or a deodexed 5.0.1 stock? Tried looking but can't find any.
Sent from my SM-N910F using XDA Free mobile app
paulscottttt said:
Is there any custom roms that keep all s pen functions or a deodexed 5.0.1 stock? Tried looking but can't find any.
Sent from my SM-N910F using XDA Free mobile app
Click to expand...
Click to collapse
hi ,
hi ,
it seems you have a N 910F ? unlock ..etc ?
if so,read thread by dev @ _alexndr It is a repack of official stock N910F and has multi CSC ( this link )
http://forum.xda-developers.com/note-4/general/rom-unofficial-repacked-lollipop-t3105093
i flashed .............. ...COH4 ( v 5.1.1 ) and see it is a deodexed Rom .
He also has POF2 listed that is a v 5.0.1 Rom ( i am not sure if deodexed , but it should be ? )
Plse make sure it is correct Rom for your device .
good luck
I am running default 5.0.1
bootloader N910fxxu1boc5
Baseband n910fxxu1boc4
Csc n910fxxu1bob2
Pda n910fxxu1boc5
Do I use the first one or second
Sent from my SM-N910F using XDA Free mobile app
paulscottttt said:
I am running default 5.0.1
bootloader N910fxxu1boc5
Baseband n910fxxu1boc4
Csc n910fxxu1bob2
Pda n910fxxu1boc5
Do I use the first one or second
Sent from my SM-N910F using XDA Free mobile app
Click to expand...
Click to collapse
hi,
if you are satisfied its your correct device unlock N910F, then your options is..
1 st one you upgrade to Android v 5.1.1 the other
2 nd is the same Android version you are on currently, Android v 5.0.1.
It depends what you want to do.... upgrade phone to Android v 5.1.1 or rather stay on v5.0.1 ?
i am on version 5.1.1 and see it is deodexed
as stated in my earlier post i think other Rom should also be deodexed.
If your purpose is to try and get Xposed framework onto device, i have seen in thread same thread (somewhere, with a relevant link) to a zip file for N910F for Android v5.1.1, to flash to get Xposed working.
I am not really interested in Xposed framework , as i had it on my device with certain modules, when i was still on Android v 4.4.4.. really good and cool, but it directly and indirectly "broke" stuff on my phone even after uninstalling
so i cannot help much in that direction.
it's your choice what Rom you want to flash.. the v5.0.1 or v5.1.1
Just to add since upgrading from Android v4.4.4. to Lollipop and when i was still on v 5.0.1 , I have flashed about 5 x different countries Roms.. as updated 5.0.1 versions became available (I was originally on Vodafone, but had unlock bootloader) it does not matter as long as you ave unlocked bootloader and you are sure Rom is correct one for you device N910F.
Yes of course, you must know how to flash... otherwise search XDA threads , Google or check YouTube for tutorials on subject.
good luck
Is it okay to flash another country 5.1.1 for n910f? As far as I am aware 5.1.1 is not out in the UK.
Sent from my SM-N910F using XDA Free mobile app
paulscottttt said:
Is it okay to flash another country 5.1.1 for n910f? As far as I am aware 5.1.1 is not out in the UK.
Sent from my SM-N910F using XDA Free mobile app
Click to expand...
Click to collapse
hi
yes , the N910F stock deodexed v5.1.1 Rom of @_alexndr in relevant thread is a multI CSC ( UK included ) Rom .As pointed out by me in earlier post certain requirements do apply device /phone
has to be same ..Eg ... N910F and unlock bootloader
I flashed Roms from UK ,Netherlands ,Germany , NEE countries and many others etc .
A few "pointers " below .....................................
Also if not sure hows "something" is done ,search for answers ..XDA and Youtube videos helps calm the nerves .
Google is your friend if you don't understand a meaning /term or problem .
and remember common "fixes " eg .if flashing and you get into "bootloop " and don't know what to do ...check that you pc has correct drivers for phone installed ( installing KIes should install drivers) ,
your USB cable is correct not faulty , USB port is ok . Flash Rom again .
Also when downloading ROM make sure its not corrupted .( check MD5 sum of download (if available )
Do your "homework/ research " regarding what you want to do ..!!
Also be aware of the risk involved .
Don't blame other members if you " slipped up."
good luck
willcor said:
hi
yes , the N910F stock deodexed v5.1.1 Rom of @_alexndr in relevant thread is a multI CSC ( UK included ) Rom .As pointed out by me in earlier post certain requirements do apply device /phone
has to be same ..Eg ... N910F and unlock bootloader
I flashed Roms from UK ,Netherlands ,Germany , NEE countries and many others etc .
A few "pointers " below .....................................
Also if not sure hows "something" is done ,search for answers ..XDA and Youtube videos helps calm the nerves .
Google is your friend if you don't understand a meaning /term or problem .
and remember common "fixes " eg .if flashing and you get into "bootloop " and don't know what to do ...check that you pc has correct drivers for phone installed ( installing KIes should install drivers) ,
your USB cable is correct not faulty , USB port is ok . Flash Rom again .
Also when downloading ROM make sure its not corrupted .( check MD5 sum of download (if available )
Do your "homework/ research " regarding what you want to do ..!!
Also be aware of the risk involved .
Don't blame other members if you " slipped up."
good luck
Click to expand...
Click to collapse
thank you for all the info. flashed to 5.1.1 stock is there a root for my device. cant seem to find anything on google
paulscottttt said:
thank you for all the info. flashed to 5.1.1 stock is there a root for my device. cant seem to find anything on google
Click to expand...
Click to collapse
hi ,
i am on v5.1.1 ( same repack ) as you Yes ,i have root .
it is actually very very straightfoward .
1. first download install custom recovery TWRP vers 2.8.7.0 via odin .
Here is link to TWRP V2.8.7.0
https://twrp.me/devices/samsunggalaxynote4qualcomm.html
Choose International.... N910F to check if you happy ..right version ?
or direct download
https://dl.twrp.me/trltexx/
first top one choose "twrp-2.8.7.0-trltexx.zip 13M " download if you happy its correct ?
2. then download a permissive kernel ..it is stock kernel just that @ zamcum enable it to accept root
http://forum.xda-developers.com/note-4/snapdragon-dev/kernel-5-1-1-selinux-enforcing-t3190799
link to download , is in post # Thanks to @ zamcum
3 . You can then download @ chainfire BETA SuperSU v2.49 zip link to download in first post
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
( keep chainfire zip ,as a backup, if TWRP does not root device )
Instructions to follow...........
Start by opening Odin and place your phone in download mode etc and flash TWRP with ODIN
After TWRP installs and reboots etc ..(.what i did) ..don't go to TWRP recovery yet
i connected phone to laptop /pc and place mod /permisive kernel zip on root of your device .(phone )
disconnect USB from pc .etc
Switch phone off .
then "old story" to get to recovery ..... volume UP + PowerButton + Home button
Give time to boot to TWRP and navigate in TWRP menu to where you can see the kernel.zip and flash with TWRP .......after flashing TWRP will ask if you want to reboot ..."say yes " and reboot
TWRP will then offer to root your device ..Yes and let TWRP root device ...afterwards it will request to update the "binaries " yes allow ......thats it !!!!!
Otherwise if this step( TWRP not offering to root ) is missed .....you will then most probably have to flash chainfire SuperSU zip with TWRP (as the permissive kernel was flashed before ,device should then let you flash SuperSU )
Important plse note......
TWRP offered to root my device and i said yes ..thus not using chainfire zip at all !!!! it was only for backup use )
Plse note(tip )
if you "slip up/error " and get into a bootloop you'll have to flash ROM v 5.1.1 again and start again This was not necessary for me and all was plain sailing .
very straightforward !!
good luck
Bottom line... please note ,
above method will trip Knox..but yes mine was tripped in OCTOBER 2014..!!
Otherwise there is no other way around Knox at moment ..for those members who cares ??
Yeah when I hold volume up, home and power button I just get could not boot normally. Then it is in download mode
Sent from my SM-N910F using XDA Free mobile app
paulscottttt said:
Yeah when I hold volume up, home and power button I just get could not boot normally. Then it is in download mode
Sent from my SM-N910F using XDA Free mobile app
Click to expand...
Click to collapse
hi, yeah, sometimes you battle to get it right.
Remember not volume down.. but volume up...!
first time i did try to get into recovery i watched a short YouTube video....on how to (way back then)
All i can say best is
Switch phone off... then with left hand above volume Up and your right hand over power and home button.
Press all three Volume up +Power button +Home button .. same time .. when phone boots.. let go of power on fist Samsung (timing is important otherwise you end up in download mode.
If you cannot get it right just Google.. something like.. "Note 4 how to boot into recovery mode /TWRP" and watch video
Its actually easy if you know.. but yes first time or so you battle..
Bottom line
is if TWRP did not.. take. Flash TWRP again and try. combo again.
If stuck.. pull battery..
If Samsung bootloop then flash Rom again
All in all it should take less than 10/20min or so to flash this......... (TWRP with Odin , flash kernel with TWRP.
Then all TWRP to root and update binaries.)
Its just like you on a learning curve.. so just relax
think positive
Good luck
willcor said:
hi, yeah, sometimes you battle to get it right.
Remember not volume down.. but volume up...!
first time i did try to get into recovery i watched a short YouTube video....on how to (way back then)
All i can say best is
Switch phone off... then with left hand above volume Up and your right hand over power and home button.
Press all three Volume up +Power button +Home button .. same time .. when phone boots.. let go of power on fist Samsung (timing is important otherwise you end up in download mode.
If you cannot get it right just Google.. something like.. "Note 4 how to boot into recovery mode /TWRP" and watch video
Its actually easy if you know.. but yes first time or so you battle..
Bottom line
is if TWRP did not.. take. Flash TWRP again and try. combo again.
If stuck.. pull battery..
If Samsung bootloop then flash Rom again
All in all it should take less than 10/20min or so to flash this......... (TWRP with Odin , flash kernel with TWRP.
Then all TWRP to root and update binaries.)
Its just like you on a learning curve.. so just relax
think positive
Good luck
Click to expand...
Click to collapse
Got it working. But I get a secuity notice every 5 mins
Sent from my SM-N910F using XDA Free mobile app
paulscottttt said:
Got it working. But I get a secuity notice every 5 mins
Sent from my SM-N910F using XDA Free mobile app
Click to expand...
Click to collapse
hi, yes thats understandable... you are rooted now !
You must freeze Security policy updates use Titanium(use search button in Titanium to find and freeze... . gone..!
It is this that is giving you the warnings.
Also freeze all Knox in Titanium (search)
You will find about 5....6..7 Knox clearly marked.. you can freeze them all if you are sure its knox related otherwise leave.
Knox can interfere with your root.. logic
good going
good luck
post entry
Also you will see in your app an app called Smart Manager (present in Android v5.1.1 )
If you click on it you will see 4 big icons.. bottom right with shield.. you will see.. "Threat found" and if you click on this it will tell you to reboot.. ignore.. Its just the root and stock selinux permissive kernel (which you know about ! ) (Samsung way of scaring you.)
I actually also freezed Smart Manager, will see if it causes any errors if not will keep it like that.

Categories

Resources