The development thread can be found here: http://forum.xda-developers.com/showthread.php?t=2516933
DOWNLOADS
Latest nightlies: http://dl.omnirom.org/n7000/
Kernel with Selinux support for flashing: http://asylumrom.com/Asylum/Asylum-Roms/KitKat-4.4/N7000/kerner/
SuperSU flashable zip for root access: http://download.chainfire.eu/supersu/
PA Gapps: http://goo.im/devs/paranoidandroid/roms/gapps
Banks Gapps (if PA Gapps doesnt work for you): http://forum.xda-developers.com/showthread.php?t=2012857
Click to expand...
Click to collapse
Click to expand...
Click to collapse
USEFUL LINKS
Official OmniROM Wiki: http://docs.omnirom.org
Changelog: https://changelog.omnirom.org/#/n7000/next
Click to expand...
Click to collapse
Click to expand...
Click to collapse
KNOWN ISSUES FOR N7000
- Wifi tethering doesn't work Fixed!
- Screen recording doesn't work (but camera recording works just fine!)
- Opendelta sometimes freezes when checking/downloading update (see FAQ)
- Charging while power off doesn't work. Fixed!
- Music playback sometimes stops randomly when using a wired headset. (we need more info on this issue, please report here in this thread if you experience it!)
- MHL Doesn't work (and probably never will).
Click to expand...
Click to collapse
Click to expand...
Click to collapse
FAQ
For those questions that pops up all the time, this will be updated often.
Also, remember to thank those who provides the answers!
Q: How does OpenDelta auto updater work?
AA1973 said:
At first, OpenDelta will check if a Rom Zip is available on your device. If OpenDelta doesn't find it, it will download a Rom. (~170mb) From then, it will only download the difference (delta) and patches the initial Rom zip within internal SD /OpenDelta. Then, after the patch, the Rom zip will be around 280mb, as it is uncompressed.
Click to expand...
Click to collapse
Q: Why does OpenDelta freeze from time to time when trying to update the ROM?
@Chainfire is still working on it:
Chainfire said:
FYI, people still suffering from the OTA updater freezing mid-verify, mid-download or mid-patch, we've found a lot of way how it didn't get fixed Putting the sdcard handling code in debug mode gets rid of the problem, but obviously we don't want to do that in production, eh!
Click to expand...
Click to collapse
Q: I pressed "flash now" but TWRP recovery says "status failed". What do I do now?
AA1973 said:
How about switching your pointer from external storage to *internal storage* within TWRP > INSTALL option?
Click to expand...
Click to collapse
Q: What's the "Flash after update" folder in the OpenDelta folder?
se1988 said:
It's for .zip files you want the openrecoveryscript to flash automatically after flashing a nightly. Take a look at this thread for examples.
Click to expand...
Click to collapse
Q: How do I keep root after flashing nightlies?
se1988 said:
After rooting, open SuperSU app - settings - Install SuperSU backup script.
Click to expand...
Click to collapse
Q: Does this ROM come with call recording?
se1988 said:
No, and it won't. However, this app has been confirmed working for some users: https://play.google.com/store/apps/details?id=polis.app.callrecorder
Click to expand...
Click to collapse
Q: How can I get FM radio on this ROM?
se1988 said:
The only solution is the Spirit FM app: http://forum.xda-developers.com/showthread.php?t=1059296
Click to expand...
Click to collapse
Q: How can I get Samsung stock apps like S-note?
se1988 said:
Go back to Stock ROM or search play store for whatever your needs are. You'll probably find something that's better than Samsung apps anyway. If you're still wondering - OmniRom will not and can never support Samsung stock apps.
Click to expand...
Click to collapse
Q: How can I get soft keys / navigation bar?
AA1973 said:
Soft keys aka navigation bar
Edit build.prop (use preferred ROM Toolbox lite/pro or a suitable root file explorer)
Add the following line at the end:
Code:
qemu.hw.mainkeys=0
You'll get navigation bar / soft keys and the desired layout of lockscreen.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
HOW TO INSTALL
XpLoDWilD said:
First time installing OmniROM to your Galaxy Note, or coming from another ROM:
- Read known issues and FAQs
- Make sure you're running a proper working ClockworkMod-Recovery - WITH SELINUX SUPPORT!
- Copy GApps and OmniROM ZIPs to your SDCard
- Boot into Recovery
- Flash OmniROM zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of OmniROM:
- Copy the OmniROM ZIP to your SDCard
- Boot into Recovery
- Flash the OmniROM zip from SDCard
- Reboot
Click to expand...
Click to collapse
se1988 said:
Also, remember to flash this after flashing ROM for root access: http://download.chainfire.eu/supersu/
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I hope so
General probs I have with Rom
_
I would love to use this rom as my daily driver but due to some issues I have reverted to my previous setup slimsabre.
Phone gets very hot whilst charging - but charges at acceptable rate. I have replaced battery but still same.
Sometimes phone gets very hot even when not in use - I could not find any reason even looking at better batt stats and cpu spy - tried reinstalling rom and gapps only and this still happened - Phone would just become very hot to hold at some random time.
Any help on this appreciated as I do not know what is causing this.
Ingott
_
having really bad battery drain.. using latest raw kernel.. any suggestions? maybe another supported kernel with better batterylife?
ingott77 said:
_
I would love to use this rom as my daily driver but due to some issues I have reverted to my previous setup slimsabre.
Phone gets very hot whilst charging - but charges at acceptable rate. I have replaced battery but still same.
Sometimes phone gets very hot even when not in use - I could not find any reason even looking at better batt stats and cpu spy - tried reinstalling rom and gapps only and this still happened - Phone would just become very hot to hold at some random time.
Any help on this appreciated as I do not know what is causing this.
Ingott
_
Click to expand...
Click to collapse
If you got the new battery cheap off eBay or similar it's a good chance that it's fake. I've had a couple of those, heating up to the point where you're afraid of damages.
Sent from my phone using some app
When I first installed Omni my phone stayed hot for ages. It turned out that Google+, which normally I do not use and have frozen on previous ROMs, was going absolutely nuts doing some sort of background sync and downloading truckloads of data. The app was running in the background for over an hour with the CPU cores pretty much maxed out. Maybe your problem is the same. Maybe not. Eventually G+ finished its evil work and the phone performance and temperature returned to normal.
I ran with the ROM for a few days and it seemed stable, but I've actually reverted to Samsung's latest stock ROM as KitKat really wasn't doing it for me. Basically I saw no tangible benefits but did lose some convenient features and interface changes were definitely a backward step with Omni. Maybe when it's matured and ART is working fully I'll take another run at it.
mosheg91 said:
having really bad battery drain.. using latest raw kernel.. any suggestions? maybe another supported kernel with better batterylife?
Click to expand...
Click to collapse
Why not use omni kernel?
ozgurgundogan said:
Why not use omni kernel?
Click to expand...
Click to collapse
where can i find omni kernel? i didn't know that it exists..
mosheg91 said:
where can i find omni kernel? i didn't know that it exists..
Click to expand...
Click to collapse
When you install omnirom it contains omni kernel too.
ozgurgundogan said:
When you install omnirom it contains omni kernel too.
Click to expand...
Click to collapse
so.. been using that and didn't know that.. any other good kernel which is battery friendly and with good performance as well?
gesture typing is not working for me on aosp keyboard, currently on 15/12/2013 nightly with 14/12/2013 mini modular pa gapps. is it the same for others?? or is it a known bug?
thank you
"Nothing is true" "Everything is permitted"
---------- Post added at 03:50 AM ---------- Previous post was at 03:38 AM ----------
mosheg91 said:
so.. been using that and didn't know that.. any other good kernel which is battery friendly and with good performance as well?
Click to expand...
Click to collapse
Try raw kernel ?
don't know how its performance is but its the only 4.4 kernel for aosp now.
go here http://forum.xda-developers.com/showthread.php?t=2397000
"Nothing is true" "Everything is permitted"
tysonraylee said:
gesture typing is not working for me on aosp keyboard, currently on 15/12/2013 nightly with 14/12/2013 mini modular pa gapps. is it the same for others?? or is it a known bug?
thank you
Click to expand...
Click to collapse
+1 to that!.
mosheg91 said:
so.. been using that and didn't know that.. any other good kernel which is battery friendly and with good performance as well?
Click to expand...
Click to collapse
Omni kernel(with SD access) was only available after flashing ROM since 12th Dec nightly, so it depends what rom you're on right now. Or perhaps you flashed Raw Kernel over it?
I would advise you to do a clean install. There's no other kernel available right now for 4.4 But it should work.
madhugk said:
+1 to that!.
Click to expand...
Click to collapse
i solved it by flashing the Google keyboard from the pa gapps thread.
rebooting the device after clearing the aosp keyboard data didn't work.
the Google keyboard has no difference over the aosp one but has a working gesture typing.
you could do that too
-download Google keyboard zip
-reboot to recovery
-flash the zip
-clear cache and dalvik cache
-reboot
-select Google keyboard from settings->language and input
done
hope it helps
direct keyboard link from pa gapps thread www.androidfilehost.com/?fid=23252070760975522
"Nothing is true" "Everything is permitted"
Guys, a little confused here,
is openDelta already integrated into the 12/15 Nightly?
if so, then why is it trying to download the whole ROM?
I think the first time we use it, it Downloads the entire ROM and then the next time it checks hashes and then only downloads updated files...
please clarify, as I thought It only downlods changed files and checks hash for that.
thought downloading fails midway, tried almost 7-8 times now,
I already increased the screen time on to 30 minues, what else can I do to get it downloaded completely
Unhappy slow charging and poor battery life.. over heating while using mobile interne
First of all many thanks for developing such a good rom. everything is upto the mark the only critical issue i am facing is very very slow charging, and along with very poor battery life i am using build of 12-12-2013. i charge my phone to 100% (it takes almost 6hrs) and it drains within 1hr (normal usage). Also i tried with two other new batteries as well same issue.
And there is one more issue whenever we change the music (forward/play-pause) using headset screen automatically turns on. Screen also turns on automatically sometimes without going on anything.
Phone over heats while running multiple application or using internet
Screen brightness is way to high on automatic setting mode even though i adjusted it with the flux response settings, in the settings of phone.
Guys please help me out i don't know much abt anroid programming and bug fixing please.
gps fix
I had a problem when I wanted to use google map for navigation, I never managed to get a gps fix. (The real problem isn't the first fix but after, it never moove on map)
Does that work for you?
I'm on the nightlie of 15/12.
@techMagnificent
At first, OpenDelta will check if a Rom Zip is available on your device. If OpenDelta doesn't find it, it will download a Rom. (~170mb)
From then, it will only download the difference (delta) and patches the initial Rom zip within internal SD /OpenDelta.
Then, after the patch, the Rom zip will be around 280mb, as it is uncompressed.
For battery drain. Install better battery stats as system app (settings > advanced) which you can find on xda. Check which app and service is driving your phone nuts.
GALAXY NOTE N7000 // KITKAT 4.4.2 // OMNI
AA1973 said:
@techMagnificent
At first, OpenDelta will check if a Rom Zip is available on your device. If OpenDelta doesn't find it, it will download a Rom. (~170mb)
From then, it will only download the difference (delta) and patches the initial Rom zip within internal SD /OpenDelta.
Then, after the patch, the Rom zip will be around 280mb, as it is uncompressed.
For battery drain. Install better battery stats as system app (settings > advanced) which you can find on xda. Check which app and service is driving your phone nuts.
GALAXY NOTE N7000 // KITKAT 4.4.2 // OMNI
Click to expand...
Click to collapse
Added to FAQ in OP. Thanks
chacal1906 said:
I had a problem when I wanted to use google map for navigation, I never managed to get a gps fix. (The real problem isn't the first fix but after, it never moove on map)
Does that work for you?
I'm on the nightlie of 15/12.
Click to expand...
Click to collapse
I never use maps for navigation, but i just got to my destination using Sygic. No problems with gps lock or navigation.
Related
Now that the Nightly Builds are back, figured their should be one thread were all of that is maintained.
First things, first. I take Zero, Nada, Zilch credit for any of these builds. For that we all have Cyanogen and TeamDouche to thank. This thread is merely a place to discuss all things nightly and link to download the Nightly Roms.
This Rom does not include the Google Apps and those you have to flash separately.
As always, Nandroid before installing.
Nightly Builds can be found here:http://mirror.teamdouche.net/?device=crespo
Google Apps here:http://goo-inside.me/gapps/
Status of latest nightly build: http://buildbot.teamdouche.net/builders/cm_crespo_full
Changelog for Nightlies: http://cm-nightlies.appspot.com/?device=crespo
UPDATE: A kang is an unofficial nightly that someone with a spare computer builds from CM's github. It is NOT AN OFFICIAL NIGHTLY AND ONLY THOSE WHO KNOW WHAT THEY ARE DOING SHOULD FLASH THEM.
If anyone's tried this can they please confirm if google "car home" works ?
thank you....
linkisoc said:
If anyone's tried this can they please confirm if google "car home" works ?
thank you....
Click to expand...
Click to collapse
if it works on Android 2.3.1 then it'll work on CM7.
Edit: Installed it and it doesn't appear on apps menu. Market comments also says the same.
Hooray beer!
No wipe needed coming from crackflashers, but I guess that makes sense since they are really the same thing (same should apply to Alpha2/3 from koush).
Itried installing Car Home, it seemed to install OK but it didn't show up in the app drawer. I uninstalled and tried again with the same result.
hey
is there somewhere a list waht is includet or not?
thanks for your Work!
flo
As the OP seem busy, I will add the known bugs and what is still missing
Missing from usual CM features:
* Numeric battery indicator
* Status Bar customisation (colors)
Bugs:
* Some issues with GMail (fix permission or uninstall/reinstall seem to fix)
* Phone reboot during phone call (Known Gingerbread bug)
* Torch is not working.
* Some people report random reboots (Never had one, seem very unusual)
footballpics.info said:
hey
is there somewhere a list waht is includet or not?
thanks for your Work!
flo
Click to expand...
Click to collapse
Thanks, I will add something about the change list in the OP
yeah! nexus s official nightly thread
seems like gaaps have changed since last i flashed on my N1
correct me if im wrong but the GAAPS version universal DPI is what we should be using
what are u think dude Bionix Kernel gonna work? or it's same with
Crackflasher Builds?
Oh yeah, lets get this started.
Just flashed Nightly and Gapps with Rom manager over the Alpha 3 with Gapps and gmail is force closing everytime I use it.
slowz3r said:
seems like gaaps have changed since last i flashed on my N1
correct me if im wrong but the GAAPS version universal DPI is what we should be using
Click to expand...
Click to collapse
Yeah you want the universal DPI one.
avetny said:
what are u think dude Bionix Kernel gonna work? or it's same with
Crackflasher Builds?
Click to expand...
Click to collapse
Unfortunately it doesn't work. It freezes when trying to boot up.
profete162 said:
Just flashed Nightly and Gapps with Rom manager over the Alpha 3 with Gapps and gmail is force closing everytime I use it.
Click to expand...
Click to collapse
clear the app data/cache for the gmail app. in main phone settings, applications, manage applications, all, gmail...
Any idea if Pershoot will start cranking out kernels for the NS?
irishrally said:
Any idea if Pershoot will start cranking out kernels for the NS?
Click to expand...
Click to collapse
Sadly, no. At current, he's only developing for the N1 and G2. I don't think he has the NS and don't think he'll build for a device he can't test for.
jlevy73 said:
Sadly, no. At current, he's only developing for the N1 and G2. I don't think he has the NS and don't think he'll build for a device he can't test for.
Click to expand...
Click to collapse
I've got $5 on it [pershoot's new NS].
Radical
10char
Running this currently... VERY pleased thus far.
MONFRO AOSP
This is a pure AOSP rom: it has no extra features so it can be snappy and smooth at maximum level.
Indeed the goal of this rom is to be as fast as possible.
- CM10 partition layout (422mb for data)
- Devil Kernel 1.4.1 VC (new kernels with new CM vsync available as addon)
- Devil Kernel Config included (and a init.d script generated with this program, to have everything set up stable at the beginning. If you set bigmem, before reboot remember to set 480 in videocamera settings, otherwise camera app will crash with bigmem). I suggest to install also NSTools, to have more overclocking and BLN options.
- GAPPS (updated to latest) are included
- I SUGGEST A FULL WIPE BEFORE INSTALLING THIS ROM, because added features from CM10, Helly Bean, AOKP and other roms can conflict with pure AOSP settings and functions
DOWNLOAD MONFRO AOSP 23.09.2012 FROM HERE
MD5: 086981af9bd829a742d2d34dd3652b81
- BATTERY MODS
- Battery % Mod CM style
- Battery % Mod Perka Newborn
- Battery Mod restore original icon
- MODS
- Devil Kernel 1.5.2 + new CM vsync
- Semaphore Kernel 2.1.2 + new CM vsync
- MODEMS/RADIO
Here you can find a lot of compatible modems/radio
- THEMES
- MonfroWhite by sephhi
@ALL: feel free to post mods and themes. I will add them to the 1st post
Reserved.
It took me a lot to upload this rom.
It was ready and working perfectly on 21.09.2012...all today i was out and i could upload it only now.
Monfro said:
Reserved.
It took me a lot to upload this rom.
It was ready and working perfectly on 21.09.2012...all today i was out and i could upload it only now.
Click to expand...
Click to collapse
will give it a try.....thank you!
Great work! Appreciate the effort for another AOSP
Looks like I've got another ROM to try out... it will have to be tomorrow though...
Sent from my SGH-I897 using XDA
LOVE the toggle customization. Little laggy on first running overall but so far so good.
It's official, I'm in love! Soft keyboard type option in messages so I can "Enter for new line" and not have that dumbass key!!! THANK YOU
AceofSpades90 said:
Great work! Appreciate the effort for another AOSP
Click to expand...
Click to collapse
I have to say thank you, because your Lanight rom showed me how fast AOSP roms are, as you can see from my enthusiastic comment of 20.09.2012.
But on Lanight 4.0 there were some glitches, for this reason i decided to work on an AOSP rom. I see that you worked to fix Lanight while i was working here: if i would have seen your new rom build, probably i wouldn't have worked on my AOSP.
joe3681 said:
LOVE the toggle customization. Little laggy on first running overall but so far so good.
It's official, I'm in love! Soft keyboard type option in messages so I can "Enter for new line" and not have that dumbass key!!! THANK YOU
Click to expand...
Click to collapse
Message app is from CM: it works better than AOSP one.
AOSP message let you enter messages only of 160 letters, for this reason i decided to substitute it with CM one.
cant get radio working.....
Wifi and signal are not opening. Looked around but didnt see any other radios available? Am i looking in the wrong place? (in this forum) Other than that the rom looks great, but until I can get my wifi working i cant get a full picture of what this rom will be like... I am going to do some more reading. had this problem before, but flashed a radio and everything was good. Now I cant seem to find one. Call me an idiot if you will, just need some direction on where to go from here. The website i used last time has radios for ics but not JB.
Also shell was not given SU permissions. Bad flash maybe?
Thanks in advance....
Poke01 said:
Wifi and signal are not opening. Looked around but didnt see any other radios available? Am i looking in the wrong place? (in this forum) Other than that the rom looks great, but until I can get my wifi working i cant get a full picture of what this rom will be like... I am going to do some more reading. had this problem before, but flashed a radio and everything was good. Now I cant seem to find one. Call me an idiot if you will, just need some direction on where to go from here. The website i used last time has radios for ics but not JB.
Also shell was not given SU permissions. Bad flash maybe?
Thanks in advance....
Click to expand...
Click to collapse
Here you can find a lot of compatible modems/radio, find the one that works best in your area:
http://soggycashew.weebly.com/cm7miui--ics-modems.html
If you have problems with SuperUser, try SuperSU from Play Store.
Updated first post with modems/radio link and battery % mods.
@ALL: feel free to post mods and themes. I will add them to the 1st post
Added mods to flash latest Devil and Semaphore kernels + new CM vsync
Your cappy looks promising because you are a recognized Dev. seems your also using same partition layout as of hellybeans that why can't flash this cappy on my captivate as I'm using broken sd device.
Sent from my SGH-I897 using XDA
s0ul_ali said:
Your cappy looks promising because you are a recognized Dev. seems your also using same partition layout as of hellybeans that why can't flash this cappy on my captivate as I'm using broken sd device.
Sent from my SGH-I897 using XDA
Click to expand...
Click to collapse
This rom uses the same layout as CM10: 422mb on fastest nand for data and the rest (slow nand) for system.
I am sorry you can't try this rom. I have read here and there about people with broken internal SD but i didn't entered in details.
another AOSP rom to test...nice......will test it soon.....
Monfro said:
Here you can find a lot of compatible modems/radio, find the one that works best in your area:
http://soggycashew.weebly.com/cm7miui--ics-modems.html
If you have problems with SuperUser, try SuperSU from Play Store.
Updated first post with modems/radio link and battery % mods.
@ALL: feel free to post mods and themes. I will add them to the 1st post
Click to expand...
Click to collapse
I've been on xda long enough, but I'm drawing a blank at the moment. If my WiFi isn't turning on, would changing the modem affect that?
My Captivate has been relegated to my backup device, almost always used on WiFi.
From what I've played with on this rom, I like it a lot. Keep up the great work!
I have had similar issues with other JB AOSP roms with CM10 base. If I understand it correctly, it is due to the datadata partition that is included with this base (data partition table messes up the Kernel or something). To my knowledge there is no work around for this. Some of the AOSP roms here (LANIGHT for example) have a nodatadata version which solves the problem.
Hope this helps!
Poke01 said:
Wifi and signal are not opening. Looked around but didnt see any other radios available? Am i looking in the wrong place? (in this forum) Other than that the rom looks great, but until I can get my wifi working i cant get a full picture of what this rom will be like... I am going to do some more reading. had this problem before, but flashed a radio and everything was good. Now I cant seem to find one. Call me an idiot if you will, just need some direction on where to go from here. The website i used last time has radios for ics but not JB.
Also shell was not given SU permissions. Bad flash maybe?
Thanks in advance....
Click to expand...
Click to collapse
Sagui said:
I have had similar issues with other JB AOSP roms with CM10 base. If I understand it correctly, it is due to the datadata partition that is included with this base (data partition table messes up the Kernel or something). To my knowledge there is no work around for this. Some of the AOSP roms here (LANIGHT for example) have a nodatadata version which solves the problem.
Hope this helps!
Click to expand...
Click to collapse
To enable wifi try these 2 methods:
1. turn on Bluetooth, reboot, activate wifi and now it works.
2. activate wifi, turn on Bluetooth, reboot and now wifi works
Sent from my Captivate
Monfro said:
To enable wifi try these 2 methods:
1. turn on Bluetooth, reboot, activate wifi and now it works.
2. activate wifi, turn on Bluetooth, reboot and now wifi works
Sent from my Captivate
Click to expand...
Click to collapse
Method 1 worked for me....Awesome! Thanks!
tried downloading the file and my antivirus went crazy lol .....
Zero4 said:
Method 1 worked for me....Awesome! Thanks!
Click to expand...
Click to collapse
So the problem comes from the Bluetooth kill function in devil kernel, which kills also wifi.
I suggest to disable devil idle and deep idle and to leave "enable Bluetooth " in devil kernel config app.
MrSwiss876 said:
tried downloading the file and my antivirus went crazy lol .....
Click to expand...
Click to collapse
It is because of superuser, but there are no viruses inside the zip.
Sent from my Captivate
Flashing!! :fingers-crossed:
Hey Monfro, how is going the battery life so far ?
Latest Downloads
CM10.1 http://d-h.st/i3V
CM10.2 https://drive.google.com/file/d/0B1V_hMyelDz0Rm1nenlqT2JKWkE/edit?usp=sharing AS OF 21.11.2013
UNOFFICIAL FAQ FOR CM10.1/10.2
DOWNLOAD AND INSTALLATION
Q: Where’s the download?A: The initial FXP release had an incorrect kernel – you can download a working version of ROM from here. http://d-h.st/TPT
This ROM has since been updated a download can be located here. http://d-h.st/i3V
If you wish to try a CM10.2 (that’s Jelly Bean 4.3 – have Sony actually released a 4.3 ROM yet?) one can be downloaded from the link above.You can also download the correct version of GAPPS for Jelly Bean 4.3 here. http://brintaylor.info/Android/CM/gapps/
For the CM10.2 build you should use this link to report bugs. https://docs.google.com/forms/d/185s...9UINQ/viewform
Uberlaggydarwin plans to take a 'light touch' approach to support via XDA, so don't necessarily expect an answer to a query if you post in this thread
It seems like FXP have delayed releasing for our device for now, but information about CM builds that are being actively supported and developed can be found in this thread for now.
Q: How do I install?
A: You need an unlocked bootloader and an installed recovery. BACK UP your current ROM to your external SD card. Put the ROM and GAPPS on your external SD card. Boot into your recovery, do the necessary wipes, flash the ROM, flash GAPPS, reboot, victory. Disclaimer: if it breaks your phone, it’s your fault.
Q: Do I need to install the supplied kernel before installing the ROM?
A: No, unlike older xperia models CWM is able to flash both the kernel and the ROM at the same time. There is no need to use fastboot or flashtools to flash the kernel first, just a working recovery and an unlocked bootloader on your phone.
Q: Can I use another kernel instead?
A: No, for now only the supplied kernel will work.
Q: I’ve installed the ROM but can’t find the play store?
A: Immediately after installing the ROM you should install the 4.2.2 version of GAPPS (Google Apps) – this installs the play store and several other applications that Google regard as essential to the Android experience. This can be found here – http://goo.im/gapps/gapps-jb-20130812-signed.zip
Q: How do I update to the latest version of the ROM?
A: Once you’ve downloaded the latest version to your SD card, boot into recovery. No need to wipe your data, though you probably should wipe cache and dalvik cache (I don’t know whether this is done automatically as part of the installation but it can’t do any harm). You don’t need to install GAPPS again as this is a firmware update, not a new installation.
However if you’re moving between versions i.e. 10.1 to 10.2 you should definitely do a factory reset – the ROM may well work fine without a data wipe, but it may not and any problems might not be immediately noticeable (making bug tracking difficult). I would advise you NOT to report bugs if you’ve moved between android versions without a factory reset.
Q: When will they release a version that works on a locked bootloader?
A: Never. Some the features of the ROM simply won’t work very well/at all on a stock kernel. If you are rooted you can simulate some of the features with apps and mods though.
POST-INSTALLATION QUESTIONS
Q: I’ve installed the ROM – I can use Titanium Backup to reinstall all my apps right?
A: Yes and no. They may work fine, they might not – you are better off letting Google’s back up service restore all your apps. If you restore an app using Titanium or similar software and it’s buggy, there’s no point reporting it – re-install the app instead, perhaps even the ROM.
Q: 4G isn’t working – what do I do?
A: It’s not enabled by default on CM10.1 so you must do the following.
Go to the dialpad/phone.
Dial in the this number: *#*#4636#*#* (This will bring up "Phone info").
Tap WCDMA from under "Set preferred network type".
Select "LTE/GSM/CDMA auto (PRL)".
The 4G LTE network should now be activated.
Q:Where’s USB mass storage?
A: After ICS Google stopped including it in their Android builds, as such mass storage mode is not a feature that was kept by CM for Jelly Bean. Individual manufacturers do what they want though, which is why Sony, Samsung and others still have it. Skilled modders may be able to add to ROMS based on this development, I reckon they might be able to patch this one to include it too
Q: This ROM is buggy as hell and drains my battery – how do I let the developers know?
A: Logcat and/or a kernel log - or it didn’t happen for bugs.
Better battery stats for battery drain.
There are lots of guides out there showing you how to take logs and how to record battery stats.
Anecdote – I activated Google+ yesterday as I like the auto-photo upload feature but wakelock detector revealed it was killing my battery (I think it’s dodgy on stock too). The choice was the app or the ROM, I chose the ROM.
Q: After installation something random doesn’t work – what do I do?
A: Check the thread to see if other users have mentioned the issue and to see if the developer has posted a solution. Also, you’re on XDA, you’re an advanced user, you have unlocked your bootloader, thrown out your warranty and accepted the consequences. So please try to resolve the issue yourself. In general if you are having a problem and no one else is, it will be a problem with your phone/download/installation.
Phone - obviously a hardware fault can't be foreseen by the developer and have you unlocked your bootloader!
Download - Most downloads are fine. But I've flashed enough ROMS to know that sometimes a file gets corrupted and sometimes they say they are complete when they are not. Sometimes I've been careless and clicked on the wrong download, sometimes the website hosting the site is haveing a a bad day, sometimes the developer puts the download in the wrong place too The first things to check are the name and size of the file - if these tally you're probably fine to install. If you want to be extra cautious you can check the MD5 hash to see if your download matches. Sometimes the file gets corrupted on upload - nothing anyone can do about that...
Installation - (Please back up your orignal ROM). Typically you'll be installing this ROM using a recovery from another ROM/kernel/MOD - so if you have problems installing , it might be that you have a bad recovery.
The wipes really need to be done to ensure the smooth running of your phone, but as you've backed up, the 15 seconds you spend properly wiping should not be much of a chore.
If you're one of the first downloaders, I guess there is some merit in saying you couldn't install, but if it's been out for a while and there are loads of posts saying 'what a great ROM' there's little point posting 'won't install'. Describe exactly what you've done and someone might help.
Bear in mind there are apps/hardware that the developers of this ROM won’t have heard of/care about - so if something doesn’t work properly on your phone it could be for numerous reasons. Either way, this may be something you have to live with. Alternatively, if the app is essential to you, you’ll have to return to a backup.
Remember this ROM is in development, there are no promises of perfection and no one is forcing you to use it. However, the right kind of feedback is always welcomed by the developers and may be acted on – the wrong kind will often be ignored.
Q: What does a perfect bug report look like?
A: Go here. http://forum.xda-developers.com/showpost.php?p=46935640&postcount=313
Q: What are the known bugs?
A: FM radio doesn’t work.
A: Attempts to offline charge cause the phone to boot.
A: 4G activation is not remembered between boots for CM10.1.
A: For 10.2 there is a known battery drain issue related to WiFi. See the solution here. http://forum.xda-developers.com/showpost.php?p=46923723&postcount=301
The following issues have been reported by some users, but others say it doesn’t affect them. They are regarded as hardware issues – anecdotal ‘me too’ posts will be ignored. However, supply a log and your phone’s date of manufacture and the developer may look into it (this might help you prove that your phone is faulty, so it’s a worthwhile exercise).
Erratic touch screen response.
Reading external SD Card in recovery and in use.
As others have said this is possibly the most stable first CM build they’ve encountered and I agree – it’s definitely suitable for daily use. I've been using it from release and haven't had a single reboot/app crash or freeze.
http://uploaded.net/f/q3au96
CM 10.1 released for huashan
Its cm for our phone right?!??
Sent from my ZTE Blade G using xda app-developers app
Thanks for sharing. I saw yesterday in the changelog that both 10.1 and 10.2 where announced on FXP 242 (10.1 in beta and 10.2 in alpha), but I can't find the 10.2 download anywhere.
Maybe they don't publish public download links for alpha versions ?
Parkside said:
...no announcements, I can't keep it to myself. You'd do the same right?
Click to expand...
Click to collapse
Its safe to download huanshan cm file for our phone.(know that huanshan is code name for our phone)????
Sent from my ZTE Blade G using xda app-developers app
Yes take a look
karma123 said:
Yes take a look
Click to expand...
Click to collapse
Wooohooooo im so happy i cant wait to test itThanks to FXP team !
When i flash it im gonna make review wohoooooo
Sent from my ZTE Blade G using xda app-developers app
---------- Post added at 12:06 PM ---------- Previous post was at 11:58 AM ----------
karma123 said:
Yes take a look
Click to expand...
Click to collapse
Can you tell me what file to download??
Sent from my ZTE Blade G using xda app-developers app
Download this :- http://uploaded.net/file/7ntq0zp6/from/q3au96
Flashed and booted. Its nice. But some screen flickering while scrolling. Like in settings etc etc. But that can resolve with enable the " Disable Hardware Overlay" option from Developer Settings
What about performance ? Can you run antutu bench ? how much is free / used RAM ? etc.
thanks
Are mirrors allowed? Can somebody mirror this file? Im sorry but uploaded has failed me several times already...
mmm273 said:
What about performance ? Can you run antutu bench ? how much is free / used RAM ? etc.
thanks
Click to expand...
Click to collapse
Now only i flashed this. I dont have any apps installed. So performance is awsom now. Free RAM is 509 and used 333
ok, only for compare - what antutu score ? With stock ( fresh flash) i have 21 000...
Screen Flicker
Hi @Rajeev
I didn't experience screen flickering at ALL in ANY test builds so I find this really difficult to believe but I'm happy to take a detailed look at it ..
Log's plus video(so I can see what you mean) would be useful so I can get this possible ?issue? and if it is an issue then I'll get it resolved.
None whatsoever for me so this is a really weird issue....
Thanks
I have the flickering too ! And the phone often soft freezes. Seems like the app isnt updated anymore on screen. It can also be just the keyboard for example. Hiting recent tasks unfreezes it but systemui sometimes freezes until reboot.
Sent from my C5303 using xda app-developers app
uberlaggydarwin said:
Hi @Rajeev
I didn't experience screen flickering at ALL in ANY test builds so I find this really difficult to believe but I'm happy to take a detailed look at it ..
Log's plus video(so I can see what you mean) would be useful so I can get this possible ?issue? and if it is an issue then I'll get it resolved.
None whatsoever for me so this is a really weird issue....
Thanks
Click to expand...
Click to collapse
Hi Bro @uberlaggydarwin
Yes i am saying truth only.
1) While Scrolling in settings Its flickering like waves. But its not coming after Click the " Disable Hardware Overlay" Function.
2) When i press the Reboot option its rebooting but its rebooting like something weird in Screen..
3) Soft reboots happens multiple Times...
I know its a Beta release. I am not complaining . But answering ur question...
mmm273 said:
ok, only for compare - what antutu score ? With stock ( fresh flash) i have 21 000...
Click to expand...
Click to collapse
I'd like to see a screen of that score. Seems a bit too high. Sure you have the SP ?
You're using V4 ofcourse, my bad.
Bootloader
Just wondering if you are guys are using locked or unlocked bootloader? I'm locked with CWM and I'm wondering what the process would be of installing... (e.g. wiping /data...)
jakelooker said:
Just wondering if you are guys are using locked or unlocked bootloader? I'm locked with CWM and I'm wondering what the process would be of installing... (e.g. wiping /data...)
Click to expand...
Click to collapse
Hey, Make a backup, you need an unlocked bootloader for this. Then wipe all cache and data etc. then flash the rom on your phone
jakelooker said:
Just wondering if you are guys are using locked or unlocked bootloader? I'm locked with CWM and I'm wondering what the process would be of installing... (e.g. wiping /data...)
Click to expand...
Click to collapse
Well asfaik CM requires a custom kernel which can only be installed on a phone with unlocked bootloader. Hope ive helped.
Rajeev said:
Hi Bro @uberlaggydarwin
Yes i am saying truth only.
1) While Scrolling in settings Its flickering like waves. But its not coming after Click the " Disable Hardware Overlay" Function.
2) When i press the Reboot option its rebooting but its rebooting like something weird in Screen..
3) Soft reboots happens multiple Times...
I know its a Beta release. I am not complaining . But answering ur question...
Click to expand...
Click to collapse
LOG"S OR IT DIDN"T HAPPEN . I'm serious.
I'm downloading this release to test but I can't help much if you don't provide logs.
Are you sure its not auto-brightness being turned on as auto-brightness doesn't work very well in stock so the changes are probably more noticeable.
Reboots work perfectly fine for me..
On the recent test builds I haven't had a reboot issue but as you know the kernel is temporary so I'll redo it when 4.3 comes out....
WE NEED LOGS.
Hello xda.
I installed Cyanogenmod on my Samsung Galaxy Note 3 today with no problems at all, however I've found something that seems a bit weird. (I know there is supposed to be bugs in nightlies, of course, but I thought i'd ask anyway.)
In the performance settings of the tab, it keeps the minimum CPU frequency to 1190mhz. If I put it to 300mhz, it will work, but as soon as I exit out of the performance tab, it goes back to 1190mhz. I figured that my phone was quite hot when I didn't use it, and that's how I found out.
Have anyone seen this on the latest CM11 nightly for the Note 3? I hope somebody out there know how I can fix it.
Many thanks.
TjabbyD said:
Hello xda.
I installed Cyanogenmod on my Samsung Galaxy Note 3 today with no problems at all, however I've found something that seems a bit weird. (I know there is supposed to be bugs in nightlies, of course, but I thought i'd ask anyway.)
In the performance settings of the tab, it keeps the minimum CPU frequency to 1190mhz. If I put it to 300mhz, it will work, but as soon as I exit out of the performance tab, it goes back to 1190mhz. I figured that my phone was quite hot when I didn't use it, and that's how I found out.
Have anyone seen this on the latest CM11 nightly for the Note 3? I hope somebody out there know how I can fix it.
Many thanks.
Click to expand...
Click to collapse
try set cpu app or use temask kernel found here http://forum.xda-developers.com/showthread.php?t=2687074&page=3
jaythenut said:
try set cpu app or use temask kernel found here http://forum.xda-developers.com/showthread.php?t=2687074&page=3
Click to expand...
Click to collapse
Thanks a lot for your reply.
I've heard a little about kernels. The thing is, that this is the first time I've ever put a custom rom on an android device, so I'm not really 100% familiar with all this yet, however if the custom kernel won't be able to brick my phone, I sure would give that a try.
Should I go with the "stable" version or the beta version of the kernel?
TjabbyD said:
Thanks a lot for your reply.
I've heard a little about kernels. The thing is, that this is the first time I've ever put a custom rom on an android device, so I'm not really 100% familiar with all this yet, however if the custom kernel won't be able to brick my phone, I sure would give that a try.
Should I go with the "stable" version or the beta version of the kernel?
Click to expand...
Click to collapse
go with beta its very stable just flash with cmw or twrp and dont touch anything
jaythenut said:
go with beta its very stable just flash with cmw or twrp and dont touch anything
Click to expand...
Click to collapse
Thank you a lot
I'm taking the beta version then!
- So... I just tried to flash it with Odin, but as it is a .zip file and not .tar, I can't do that.
I do have TWRP on my device, so I can use that, I am not very sure on how to do that though?
I'm sorry for the noobish questions. First time I installed a custom rom
TjabbyD said:
Thank you a lot
I'm taking the beta version then!
- So... I just tried to flash it with Odin, but as it is a .zip file and not .tar, I can't do that.
I do have TWRP on my device, so I can use that, I am not very sure on how to do that though?
I'm sorry for the noobish questions. First time I installed a custom rom
Click to expand...
Click to collapse
go to twrp then install zip find the kernel press it it will install then reboot should be good to go do a backup just in case
jaythenut said:
go to twrp then install zip find the kernel press it it will install then reboot should be good to go do a backup just in case
Click to expand...
Click to collapse
That sounds amazing!
Thanks for your help man I appreciate it!
So, just to be 100% sure, I am going to download and install the "NEW BETA KERNEL v3.02 b1" Right?
TjabbyD said:
That sounds amazing!
Thanks for your help man I appreciate it!
So, just to be 100% sure, I am going to download and install the "NEW BETA KERNEL v3.02 b1" Right?
Click to expand...
Click to collapse
yes mate
you should try his rom its one of the best cm roms out there
jaythenut said:
yes mate
you should try his rom its one of the best cm roms out there
Click to expand...
Click to collapse
Yeah I've heard a lot about his ROM too, I should have installed that instead of the official nightly, oh well. Perhaps I will soon
I really appreciate your help. On to install the kernel now! Hopefully I will get as amazing battery life as the show
TjabbyD said:
Yeah I've heard a lot about his ROM too, I should have installed that instead of the official nightly, oh well. Perhaps I will soon
I really appreciate your help. On to install the kernel now! Hopefully I will get as amazing battery life as the show
Click to expand...
Click to collapse
you can just flash over the top with out loosing any data
jaythenut said:
you can just flash over the top with out loosing any data
Click to expand...
Click to collapse
Oh really? How?
Just the regular way of installing a rom or?
TjabbyD said:
Oh really? How?
Just the regular way of installing a rom or?
Click to expand...
Click to collapse
download rom on your phone flash it with twrp then flash the same gapps with twrp (must be the same gapps or it will factory reset)
thats it done
sembuild articles
jaythenut said:
download rom on your phone flash it with twrp then flash the same gapps with twrp (must be the same gapps or it will factory reset)
thats it done
Click to expand...
Click to collapse
That's amazing! I'll see if I will do that soon.
I installed the kernel and everything looks fine, however the performance tab is still acting weird. I think I will install a CPU app.
So this is it? There is no new settings I need to check or anything?
TjabbyD said:
That's amazing! I'll see if I will do that soon.
I installed the kernel and everything looks fine, however the performance tab is still acting weird. I think I will install a CPU app.
So this is it? There is no new settings I need to check or anything?
Click to expand...
Click to collapse
nope dont use performance tab at all use this app if you want to play with this settings
Trickser settings
Eco mode - off
MP-Decision - off
Intelli-plugin - on
Dynamic Fsync - on
Governor - Intelli-demand
Scheduler - row
https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod&hl=en_GB
jaythenut said:
nope dont use performance tab at all use this app if you want to play with this settings
Trickser settings
Eco mode - off
MP-Decision - off
Intelli-plugin - on
Dynamic Fsync - on
Governor - Intelli-demand
Scheduler - row
https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod&hl=en_GB
Click to expand...
Click to collapse
Got everything set up and running now!
Thanks a lot for your help mate! I really appreciate your time!
Now I "hopefully" will have amazing battery life just like the other people in the thread!
Hello to everyone,
While searching on the internet I find this MIUI 7 rom for HTC m7 ( for all variants I guess)... This is Chinese rom where in my opinion is the best for any other "JT " or " xl" authors who create miui roms for this phone...
It is truly MIUI 7 version for HTC m7 with a lot of optimization there in comparison with other MIUI Rom's...
Iam new here and I don't know how to post some link or to share my file here, but I will find some way...
This rom is not my own. I just want to help anyone here who is not completely satisfied with the previous couple version of this MIUI 5-6 rom's. So, I guess I help someone with this rom.
Here is the characteristics of this rom translated from Chinese.. :
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The official MIUI rom based on the latest development version 6.1.14 modify optimization, making the best use of your ROM.
Optimization change log:
repair input errors
V4A sound
power increase boot
hosts ad shielded
increase dsp manager plug
GPS optimization
(China GPS configuration, GPS positioning acceleration)
Sony imaging engine,
optimized to reduce memory usage, Page
delete the system is not commonly used components
wifi optimization to improve the acceptance rate
accelerated user interface, run more smoothly
overall odex / Z optimize
Internet speed 3G network optimization more quickly
bin file optimization
v6 script optimization
Build.Prop file optimization
ROOT privileges turned on - Safety - Authorization Management - Open
after other optimization please brush experience
integrates several mainstream applications, please run a network thanks!
Brush look forward to your feedback, your support is my greatest motivation
for this package for the card brush ROM, copy directly to a memory card using the REC brush can be! Brush completed remember to restart again!
Note: 1. This test is very smooth rom personally recommend long-term use; the first brush after Caton, restart can be!
2. Make sure that the battery is at least 60% and to ensure that the process of the computer will not brush off.
3. Brush risk, please read related Brush Brush tutorial at their own risk, and I've Brush liable for any failure of any liability.
He does not hold ROM and software copyright, please study and learning for the purpose of legitimate use.
4. If you fix some Bug undiscovered ROm on the basis of this, and make recommendations for improvement, it is recommended to continue to open and share your work.
I hereby declare the use of ROM does not provide any guarantee, does not guarantee the suitability of any user of the ROM, and does not guarantee trouble-free production; nor use of any user or loss of this ROM actually encountered any theory of liability .
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Copy this words and you will be able to find the DOWNLOAD link:
HTC One (801e/M7) 刷机包 MIUI7 最新开发版 boot省电 v4a音效 索尼成像引擎 极致
Installation is the same like others custom rom's.. Wipe data (Factory Reset) and then flash this rom.
Thanks and please feel free to ask if there's a problem..
ANDROID OS Version: 4.4.3
MIUI Version: 6.1.14
Im currently uploading this to google drive it will be ready for tomorrow
Here is The link download the whole zip file i have also test it myself and works in any variant of the phone. https://drive.google.com/file/d/0B2eRdAjeVm9oSVRlTXZkYUNoU3c/view?usp=sharing
What languages are included?
Ryukimo said:
What languages are included?
Click to expand...
Click to collapse
Hello,
All languages but still you need to install it in Chinese...
ZpanicZ said:
Here is The link download the whole zip file i have also test it myself and works in any variant of the phone.
Thanks mate for sharing the link... I was not able to do that.... What do you think for this MIUI v7 rom ? Any impression of it?
Click to expand...
Click to collapse
Is it really better than the "xl" version?
Peacemaker69 said:
ZpanicZ said:
Here is The link download the whole zip file i have also test it myself and works in any variant of the phone.
Thanks mate for sharing the link... I was not able to do that.... What do you think for this MIUI v7 rom ? Any impression of it?
Click to expand...
Click to collapse
Yeah the rom is pretty good itself im also uploading this in android file host just in case they take it down or something :b
---------- Post added at 11:00 PM ---------- Previous post was at 10:39 PM ----------
uhm theres only 1 problem i have so far , the walkman app dosen't open , im going to try installing another version of it
Click to expand...
Click to collapse
Here is the alternative download m8 you should try put them in the main post just put my name under it or something ;c lol opt https://www.androidfilehost.com/?fid=24399994186367652
HELP
i'm installing this but stuck at 1% on aroma installer. why ? :crying:
Try to restart the device and reinstall it also if you can wipe data and davilk and cache sometimes it fixes the problem
rerezatrollface said:
i'm installing this but stuck at 1% on aroma installer. why ? :crying:
Click to expand...
Click to collapse
ZpanicZ said:
Try to restart the device and reinstall it also if you can wipe data and davilk and cache sometimes it fixes the problem
Click to expand...
Click to collapse
i did it already, i'm wipe my dalvik, cache, data, but sadly still stuck on 1% (>>>System)
do i have to wipe my system as well?
please help me..
btw i use m7_ul
which one should i have to pick on the aroma installer? because i'm picked the first one
Is your phone unlocked ?
rerezatrollface said:
i did it already, i'm wipe my dalvik, cache, data, but sadly still stuck on 1% (>>>System)
do i have to wipe my system as well?
please help me..
btw i use m7_ul
which one should i have to pick on the aroma installer? because i'm picked the first one
Click to expand...
Click to collapse
ZpanicZ said:
Is your phone unlocked ?
Click to expand...
Click to collapse
yes
What Recovery are you using twrp? im using multirom btw , and have you tried re downloading the rom? also make sure that in the aroma installer just press next in every option and when in the popup or whatever that is you got to press the green button.
rerezatrollface said:
yes
Click to expand...
Click to collapse
ZpanicZ said:
What Recovery are you using twrp? im using multirom btw , and have you tried re downloading the rom? also make sure that in the aroma installer just press next in every option and when in the popup or whatever that is you got to press the green button.
Click to expand...
Click to collapse
yes, i'm using twrp and i'm using s.rom flymeOS.
i'm redownloading now..
yes i'm always press next btw
can i have screenshot of yours on MIUI v7 ? hehe
Sure m8
rerezatrollface said:
yes, i'm using twrp and i'm using s.rom flymeOS.
i'm redownloading now..
yes i'm always press next btw
can i have screenshot of yours on MIUI v7 ? hehe
Click to expand...
Click to collapse
ZpanicZ said:
Sure m8
Click to expand...
Click to collapse
i'm already download it again, and try to flash it but still stuck on 1%
If you still have your old rom go to the google play store and download the multirom manager and install that twrp it might work better with this rom.
rerezatrollface said:
i'm already download it again, and try to flash it but still stuck on 1%
Click to expand...
Click to collapse
You found from?