So I just picked up a ZAGG screen protector (the HD one I think it is called, with more of a glass effect/feel). Put it on an hour ago and after letting it sit turned the phone on to notice that it is too skinny for the screen. There is a nice little gap on BOTH sides (I got it on pretty damn even). Anyone else have this problem with a ZAGG screen protector? If this is the case with all of them I'm going to have to just get a refund, because it would be pointless if they send me a replacement with the exact same cut.
Also, what other screen protectors are you guys using/would you recommend if I do indeed need to switch and can't get a protector with a proper cut (without gap on both sides of the screen, it gets really noticeable and annoying on any light colored apps or backrounds).
Thanks for any help.
I had the same problem with the zagg HD. You will have to get the zagg original shield in order to cover the entire screen, but this protector has more of an orange peel effect.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Buy Skinomi, I've never had a problem with cut and/or orange peel effect and have had them on several different phones
Sent from my iPad using Tapatalk
http://www.amazon.com/Tech-Armor-Smartphone-Definition-Replacement/dp/B00EL94X72/
Been using Tech Armor on all my devices since finding them. They are dry/static apply rather than the wet rubbery ones like Zagg. They do eventually get scratched/marked up, but you do get a 3 pack as well as a no questions asked life time replacement (all you need to do is email them with your order #, no shipping cost, no sending anything back)
Same issue with the bad cut. Going to contact them and ask for a refund. I thought I could live with it, but I can't. Going to order one of the screen protectors from Motorola's website as people have posted they cover the full face very well.
Went ahead and ordered up a Skinomi, like recommended above, yesterday. Alos shot ZAGG an email to see what they have to say about things (told them if they still haven't fixed the cut I would either need a refund or regular replacement, whichever winds up being easier, since I never mind having an extra protector laying around).
I'm I the only person that just buys like 10x screen protectors for like 5 bucks off eBay? Sure feels like it lately :what:
Sent from my XT1060 using Tapatalk
DeathGrind said:
I'm I the only person that just buys like 10x screen protectors for like 5 bucks off eBay? Sure feels like it lately :what:
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
I used to do that back in the day.. on my blackberrys and stuff.. It works since if one gets messed up then you can just easily replace it.
But these $10+ ones are significantly better.. they stick on better, don't get the annoying bubbles as much, and might be smoother or clearer. Some of them claim to provide better protection as well but not sure how true that really is. They are also "reusable" if you wash them, but don't know anyone who actually has reused one.
I tried Xtreme Guard for my nexus 4 because it was like 85% off and i got it for the same price as the cheap ebay ones, ( ~ $1) its much better IMO. I've had it for a year on my nexus and its still on. I used the back one on it too cause it was glass on the back and could get scratched, it also helps with the grip cause its not slippery. The other cool thing is it has some self healing technology stuff that actually works, like the screen protector itself is less prone to getting scratched. And mine got some scratches that disappeared, so I guess it actually works. I was happy with it so I just got the same for my moto x., the quality is comparable to those expensive ones but price is closer to the cheap ones, when you use the discount code. Cost me like $1.50 shipped for a front and back one.
imnuts said:
Same issue with the bad cut. Going to contact them and ask for a refund. I thought I could live with it, but I can't. Going to order one of the screen protectors from Motorola's website as people have posted they cover the full face very well.
Click to expand...
Click to collapse
I tried this and they told me they are cut this way for a reason and wouldn't honor a refund. Maybe you'll have better luck than I did.
Squeaky192 said:
I tried this and they told me they are cut this way for a reason and wouldn't honor a refund. Maybe you'll have better luck than I did.
Click to expand...
Click to collapse
They have a 100% satisfaction guarantee. All you have to do is go to your online account and click refund. You get an RMA number to include with your return. I didn't even have someone contact me asking why I wanted to return.
detonation said:
http://www.amazon.com/Tech-Armor-Smartphone-Definition-Replacement/dp/B00EL94X72/
Been using Tech Armor on all my devices since finding them. They are dry/static apply rather than the wet rubbery ones like Zagg. They do eventually get scratched/marked up, but you do get a 3 pack as well as a no questions asked life time replacement (all you need to do is email them with your order #, no shipping cost, no sending anything back)
Click to expand...
Click to collapse
I ordered these as well. Thumbs up from me.
karn101 said:
I ordered these as well. Thumbs up from me.
Click to expand...
Click to collapse
Are they cut to cover the entire screen? How is the feel on the screen?
Response from ZAGG:
Thank you for contacting ZAGG and iFrogz, where we are Zealous About Great Gadgets! My name is Brittany, and I appreciate the opportunity to assist you.
In regards to your email, I would like to thank you for your preference in ZAGG and our products. Looking at your order, it does appear that you purchased the Case-Friendly version of the invisibleSHIELD. Additionally the Motorola Moto X (High Definition) only comes in a Case Friendly option, which as you have found is cut shorter around the perimeter to avoid issues with a case or bumper you might have on your phone. If you are interested in the standard edge-to-edge, you are more than welcome to switch through the warranty process online at no additional cost. Keep in mind that switching to the standard edge-to-edge also means you will be switching from the High Definition to the Original invisibleSHIELD. I hope this clears up any confusion!
Does that not seem like BS to anyone else? Makeshift excuse so they don't have to redo the current batch of HD protectors?
So why would they make one protecor case friendly and the other not? So the regular protector must not work AT ALL with cases then, right??
So no other company must make a protector that works with a case AND protects the entire screen???
RIIIIGHT
Anyone else get a different response from support when contacting them? Seems kind of ridiculous, especially considering there is no mention made on the product page about this smaller cut and case friendly design, not until you email support about it that is. If that was actually the case, wouldn't they advertise this up front before people purchase one? Riiight. Well I will wait for my skinomi, apply it, and then email them back about their so called "case friendly" design,
dems86 said:
Response from ZAGG:
Thank you for contacting ZAGG and iFrogz, where we are Zealous About Great Gadgets! My name is Brittany, and I appreciate the opportunity to assist you.
In regards to your email, I would like to thank you for your preference in ZAGG and our products. Looking at your order, it does appear that you purchased the Case-Friendly version of the invisibleSHIELD. Additionally the Motorola Moto X (High Definition) only comes in a Case Friendly option, which as you have found is cut shorter around the perimeter to avoid issues with a case or bumper you might have on your phone. If you are interested in the standard edge-to-edge, you are more than welcome to switch through the warranty process online at no additional cost. Keep in mind that switching to the standard edge-to-edge also means you will be switching from the High Definition to the Original invisibleSHIELD. I hope this clears up any confusion!
Does that not seem like BS to anyone else? Makeshift excuse so they don't have to redo the current batch of HD protectors?
So why would they make one protecor case friendly and the other not? So the regular protector must not work AT ALL with cases then, right??
So no other company must make a protector that works with a case AND protects the entire screen???
RIIIIGHT
Anyone else get a different response from support when contacting them? Seems kind of ridiculous, especially considering there is no mention made on the product page about this smaller cut and case friendly design, not until you email support about it that is. If that was actually the case, wouldn't they advertise this up front before people purchase one? Riiight. Well I will wait for my skinomi, apply it, and then email them back about their so called "case friendly" design,
Click to expand...
Click to collapse
Same response on the phone...somewhat absurd product design. I don't think the product is thick enough to bother any case...certainly not a case that has any flexibility. I was given the same offer...free exchange. Well, the old screen protector is less expensive so a trade is "huh?"...and I have to ship the new one that doesn't fit back to them. That's a pretty poor customer retention policy and one that's sure to get comments on the internet in forums where people read about their products (e.g. here)....especially since they don't describe what "case friendly" means on their web site (or in the stock blurb they give to resellers.
My first and last Zagg purchase.....
dems86 said:
Response from ZAGG:
Thank you for contacting ZAGG and iFrogz, where we are Zealous About Great Gadgets! My name is Brittany, and I appreciate the opportunity to assist you.
In regards to your email, I would like to thank you for your preference in ZAGG and our products. Looking at your order, it does appear that you purchased the Case-Friendly version of the invisibleSHIELD. Additionally the Motorola Moto X (High Definition) only comes in a Case Friendly option, which as you have found is cut shorter around the perimeter to avoid issues with a case or bumper you might have on your phone. If you are interested in the standard edge-to-edge, you are more than welcome to switch through the warranty process online at no additional cost. Keep in mind that switching to the standard edge-to-edge also means you will be switching from the High Definition to the Original invisibleSHIELD. I hope this clears up any confusion!
Does that not seem like BS to anyone else? Makeshift excuse so they don't have to redo the current batch of HD protectors?
So why would they make one protecor case friendly and the other not? So the regular protector must not work AT ALL with cases then, right??
So no other company must make a protector that works with a case AND protects the entire screen???
RIIIIGHT
Anyone else get a different response from support when contacting them? Seems kind of ridiculous, especially considering there is no mention made on the product page about this smaller cut and case friendly design, not until you email support about it that is. If that was actually the case, wouldn't they advertise this up front before people purchase one? Riiight. Well I will wait for my skinomi, apply it, and then email them back about their so called "case friendly" design,
Click to expand...
Click to collapse
I'm not sure what's not to understand. They chose to make one type of protector case-friendly (so that the case won't push up the edges of the protector). They chose to make the other type of protector edge to edge. Those are apparently the two options.
When I go to their website and go to the Moto X High Definition page, it shows a checked "case friendly" under screen coverage options. I've been around smartphones and smartphone forums long enough to understand what that means. If someone didn't understand what that meant, they could contact support.
They make case friendly protectors that aren't edge to edge because a lot of cases fit very snugly on the device and the lip of the case will push up the screen protector. A lot of people put cases on their phones, and they'd rather cut the edges back than have to deal with people calling in to get replacement screen protectors because they got pushed up.
laur3n.newm4n said:
I'm not sure what's not to understand. They chose to make one type of protector case-friendly (so that the case won't push up the edges of the protector). They chose to make the other type of protector edge to edge. Those are apparently the two options.
When I go to their website and go to the Moto X High Definition page, it shows a checked "case friendly" under screen coverage options. I've been around smartphones and smartphone forums long enough to understand what that means. If someone didn't understand what that meant, they could contact support.
They make case friendly protectors that aren't edge to edge because a lot of cases fit very snugly on the device and the lip of the case will push up the screen protector. A lot of people put cases on their phones, and they'd rather cut the edges back than have to deal with people calling in to get replacement screen protectors because they got pushed up.
Click to expand...
Click to collapse
I understand just fine what that means, and I never expected edge to edge. But if you have seen one you would know there is EXCESSIVE gap, I mean, I don't know any case that covers up the edges of the ACTUAL DISPLAY on both sides. The short cut on top and bottom make it case friendly, and not going all the way to the very edge on the sides would also. There is gap between my case and the edge of the screen, then double that gap between the edge of the screen and the protector. It would be pretty poor designing by the case manufacturer that would warrant such a short side to side cut on the HD protector.
I don't think anyone is confused about what "case friendly" means, but in this case it appears to be just poor R&D.
dems86 said:
I understand just fine what that means, and I never expected edge to edge. But if you have seen one you would know there is EXCESSIVE gap, I mean, I don't know any case that covers up the edges of the ACTUAL DISPLAY on both sides. The short cut on top and bottom make it case friendly, and not going all the way to the very edge on the sides would also. There is gap between my case and the edge of the screen, then double that gap between the edge of the screen and the protector. It would be pretty poor designing by the case manufacturer that would warrant such a short side to side cut on the HD protector.
I don't think anyone is confused about what "case friendly" means, but in this case it appears to be just poor R&D.
Click to expand...
Click to collapse
I didn't realize you meant the protector didn't cover the actual viewable display all the way, I thought you were saying it didn't cover edge to edge on the bezels. Yeah, I can see where you're frustrated now. That's excessively case friendly!
laur3n.newm4n said:
I didn't realize you meant the protector didn't cover the actual viewable display all the way, I thought you were saying it didn't cover edge to edge on the bezels. Yeah, I can see where you're frustrated now. That's excessively case friendly!
Click to expand...
Click to collapse
Haha, yeah I know. Case friendly and poor design are definitely two different things.
chrisbass said:
Buy Skinomi, I've never had a problem with cut and/or orange peel effect and have had them on several different phones
Click to expand...
Click to collapse
+1
kbluhm said:
+1
Click to expand...
Click to collapse
Ordered and on its way, went to Skinomi's site right after reading that original post, hehe.
Related
Hello,
i want to change my Ameo in a new one because there are a lot of scratches on the front body. The reason is that the keyboard slipping on the surface of the body.
If any one have the same problem please Post it here because i want to show T- Mobile that this is a failure of construction.
Mine is exactly the same, I tried to take a picture, but it wasnt comming out very well, I was quite annoyed because I tried to keep it good. Does anybody know if this happens with the black ones or is it just silver. mine isnt insured and T-Mobile wouldnt entertain me for insurance because it was 3 months old. though I have heard you can insure it online somewhere.
i've got the same kind of scratches at exactly the same positions.
but i don't think t-mobile will do anything about this
i'ts a normal sign of use
I have some scratches as well, fairly similar to yours. I'll have some pics made if I can get a hold of a good enough camera.
I have a scratch at the bottom of the screen surround. The keyboard clear top has a tiny bump on it (from where it was moulded i think) and this has scratched the case! If it had a decent leather case then it wouldnt happen!
Same here, Same scratches, same area..
Guess we need to find a decent case to carry our precious around in...
Something that has some padding between the 2 parts.
Mine doesn't have this problem. Not a single scratch at all. It still look brand new. I don't use the keyboard or the leather case though. I just carry mine "naked" with my DIY belt pouch. I just have the standard free plastic screen protector over the screen area only and not the body.
This is ironic. The keyboard is supposed to protect but does the opposite.
eaglesteve said:
This is ironic. The keyboard is supposed to protect but does the opposite.
Click to expand...
Click to collapse
It definetely does protect (the screen from cracks).
And imho some scratches on the body of the ameo are much better than a cracked screen
You now, we are speaking about a 800€ all in one device? Such a failure must not happen. If you had a 800€ Notebook with the same problem you would complaine about.
This is what my U1000 looks like close to the VGA camera on the front.
There are 2 more areas where I have some damage but I can't capture it properly on camera.
This is why we should take out insurance on our most expensive phones, as i hate scratches on my phones and if you complain about it with your provider/supplier and they are not willing to replace it when its a manufacture defect then i would personally claim on my insurance QUOTE (MY PHONE IS LOST/STOLEN TO GET BACK A REPLACEMENT) Its too expensive a device for it to scratch so easily.
I have the black HTC Advantage and I have the scratches too.
I have the black Athena and barely any scratches on mine. I use the stock case. The only time I got it scratched is when I first got it because I tried to use it without the case. Mistake on my part.
If you search the forum, you can also buy a $25 solution that protects your entire Athena. It's a plastic transparent covering that protects the entire body of the device. I think I may have posted it in the past to the accessories area. Well worth the tiny investment to protect the looks of your device.
Yep, I have the Black HTC Advantage X7500 and I have no scratches on it. I also do carry naked in my pocket especially around the office to meetings. However, I do feel I need something to protect it without gaining the bulk. I am still looking for a belt clip to carry it.
Just found this product.
http://www.shieldzone.com/item_description/HTCX7500.html
Read good review on PocketPCThoughts for a different product.
Has anyone tried it? It states as full body shield which includes guards for keyboard as well.
Looks Intresting.. But we all know that these type of solution are never as easy to install (Esp. as there are 8 pieces for the Athena)
as they are in the Promo vidz. The vidz also mention that the film has Adhesive on it. How would this affect the deve by:
1. Discoloring over time
2. Being able to easily remove the film, if need or if damaged.
3. Being removed from the screen, without pulling the touchscreen's
touch sensor film off.
Has anybody tried this stuff yet? I think I'll wait for more feedback before I buy.
http://mobilitytoday.com/articles/invisible_shield_protection.html
From some of comments, it seems easy to remove from a pda.
I don't know if that comment was from someone who works for ShieldZone though.
Staroip said:
Just found this product.
http://www.shieldzone.com/item_description/HTCX7500.html
Read good review on PocketPCThoughts for a different product.
Has anyone tried it? It states as full body shield which includes guards for keyboard as well.
Click to expand...
Click to collapse
I just ordered one. I'm having it shipped via 3 day UPS. I'll post my thoughts once I try it out. For the cost it's worth a try. They also have a lifetime replacement policy so if they get screwed up you get a free one. We'll see how it goes.
ltxda said:
I just ordered one. I'm having it shipped via 3 day UPS. I'll post my thoughts once I try it out. For the cost it's worth a try. They also have a lifetime replacement policy so if they get screwed up you get a free one. We'll see how it goes.
Click to expand...
Click to collapse
I will wait for your feedback before I try one. It seems to be right thing to have with this device but I am not sure yet.
lpsi2000 said:
I will wait for your feedback before I try one. It seems to be right thing to have with this device but I am not sure yet.
Click to expand...
Click to collapse
I have it on for over 4 months. Search this very forum for an extensive discussion on it. Easy to install with the water spray bottle provided. The screen protector is a bit sticky so I took it off and used a regular one.
Don't ask any more questions. Just search for the original thread here
Here
http://forum.xda-developers.com/showthread.php?t=298808
http://www.clear-coat.com/product.php?productid=475&cat=0&page=1
im a bit skeptic about this product, have anyone tried previous products by clear coat?
Found a review of it here : http://www.intomobile.com/2008/06/23/clear-coat-full-body-scratch-protection-for-iphone.html
WDawn said:
Found a review of it here : http://www.intomobile.com/2008/06/23/clear-coat-full-body-scratch-protection-for-iphone.html
Click to expand...
Click to collapse
to be honest, when i cant find any other reviews... then suddenly theres a really positive review, that makes me really skeptical...
and yes, it is this EXACT same review makes me skeptical about this product lol
Sounds like
http://www.lowes.com/lowes/lkn?action=productDetail&productId=88113-74130-PFW486&lpage=none
That's the stuff I used in my bathroom to frost my windows... I got it wet and slid it on.. used a squeegee and flattened it all out and 3 years later is is still sticking there.
The difference is that this is
1.) Clear
2.) Cut into the proper shape (you could do this yourself with some measuring but it saves hassle)
3.) the squeegee is probably smaller.
My bathroom windows are in a VERY humid environment... I have never had ANY peeling.
However I don't keep my bathroom windows in my pocket... so I don't know if the corners will peel up.
My main point is that for $24 of this "film" to cover a TINY phone... you can buy the same thing for $18 that would cover 10 phones... if the product works fantastic... the profit margin for them is HUGE. If it doesn't work... it's the biggest rip off ever.
See if Gila makes a clear one... get $18 worth and tinker away.
http://forum.xda-developers.com/showthread.php?t=425314
So it's good or not ? Anyone use one of these ?
asolano895 said:
So it's good or not ? Anyone use one of these ?
Click to expand...
Click to collapse
I've seen them used on iPhones, hard to put on but once it's on, it stays.
Black93300ZX said:
I've seen them used on iPhones, hard to put on but once it's on, it stays.
Click to expand...
Click to collapse
Since you've had the Fuze already... Is the shape exactly the same as the TP? It looks like sprints version is a little more round along the corners. I'd Like to go ahead and purchase one of these for the Fuze but don't want to have to send it back.
venelar said:
Since you've had the Fuze already... Is the shape exactly the same as the TP? It looks like sprints version is a little more round along the corners. I'd Like to go ahead and purchase one of these for the Fuze but don't want to have to send it back.
Click to expand...
Click to collapse
The only difference I noticed when seeing the 2 up next to each other was the shape of the speaker hole on the back, that might be enough to throw the protection off. Ask Raspster about it more, he had both the European and the Fuze at the same time, so he could tell you better than I could.
I got one, just to try it out.
Exactly as described above. Its a bit fiddly getting on but once on, it sticks very well.
Its great at sticking to flat surfaces, not so good on curves. And they don't even try and cover the corners on the device, which I would think are the places I'd want protected if I was to drop it.
The texture makes the back look very different from normal; its much nicer without the cover on. On the front, you can't really see the cover at all; edges are perfectly aligned with the phones edges.
The back and the front of the phone are covered very well. Sides not so great. Corners not at all. Front looks good. Back looks crap.
My opinion, its no way worth $24
just got mine on Friday exactly as it's described, protects almost every part of the phone with their cut out plastic shield, however as mentioned in earlier post... doesn't really cover the edges, all in all... does really stick and so far looks pretty ok with the exception of little bubbles within the shield (poor application technique)
marcel808 said:
I got one, just to try it out.
Exactly as described above. Its a bit fiddly getting on but once on, it sticks very well.
Its great at sticking to flat surfaces, not so good on curves. And they don't even try and cover the corners on the device, which I would think are the places I'd want protected if I was to drop it.
The texture makes the back look very different from normal; its much nicer without the cover on. On the front, you can't really see the cover at all; edges are perfectly aligned with the phones edges.
The back and the front of the phone are covered very well. Sides not so great. Corners not at all. Front looks good. Back looks crap.
My opinion, its no way worth $24
Click to expand...
Click to collapse
Hi Marcel808,
Is it easy to peel it off without tearing the phone's original casing? Especially the back cover. I just ordered mine, hope it arrives soon.
Proghtc said:
http://forum.xda-developers.com/showthread.php?t=425314
Click to expand...
Click to collapse
I have used the Zagg's products (formerly Invisible Shield) on my 6800, 6700, wifes Centro and even custom ordered for my Pioneer 6800DVD in my car. I really like the product, the service is second to none... That said, I think since I have used the product and know how it performs in pockets, and how to install correctly (installed dozens of shields for myself, family and friends), I may try this new product.
Screen protection has always been great and flat surfaces (side) great as well but the corners usually give way, slide and start to bubble after about 4 months of heavy in and out of the pocket use.
This is a $24 experiment begging to happen.... now if Sprint would just release the damn phone!
I would also like to know this. Can it be removed again without leaving marks on the phone?
How scratch proof is it really?
Because of the lack of info on the site (still no video's on how to apply the thing, their forum is just about empty and they don't reply to customer questions...) they really don't seem to thrustworthy ...
DicE
serphinox said:
Hi Marcel808,
Is it easy to peel it off without tearing the phone's original casing? Especially the back cover. I just ordered mine, hope it arrives soon.
Click to expand...
Click to collapse
mrrogers1 said:
I have used the Zagg's products (formerly Invisible Shield) on my 6800, 6700, wifes Centro and even custom ordered for my Pioneer 6800DVD in my car. I really like the product, the service is second to none... That said, I think since I have used the product and know how it performs in pockets, and how to install correctly (installed dozens of shields for myself, family and friends), I may try this new product.
Screen protection has always been great and flat surfaces (side) great as well but the corners usually give way, slide and start to bubble after about 4 months of heavy in and out of the pocket use.
This is a $24 experiment begging to happen.... now if Sprint would just release the damn phone!
Click to expand...
Click to collapse
I would get the one released by Zagg. They offer a lifetime replacement on all products and they will replace it no questions I know. Their stuff is nearly impossible to scratch and I TRIED just about everything to scratch it. All phones full covers are $25. Never had any bubbling issues with Zagg's products.
yes it can easily be removed without any mark left at all....I found the cover started to collect dusk a lot (it must be slightly sticky) so I removed it.
Phantisy said:
I would get the one released by Zagg. They offer a lifetime replacement on all products and they will replace it no questions I know. Their stuff is nearly impossible to scratch and I TRIED just about everything to scratch it. All phones full covers are $25. Never had any bubbling issues with Zagg's products.
Click to expand...
Click to collapse
Trust me, I know oh too well the replacement process and have replaced and installed many over the last 5 years.
The fact that I know the Zagg product so well, makes the experiment more interesting. I know the Zagg stuff so well that I will know if this Clear Coat stands a chance AND since it's only $25... It might turn out to be junk, the company could not stand behind the guarantee BUT we'll see.
*Update
Just got my phone yesterday and I just ordered the Clear Coat. I'll install and do a little initial write up. I'll order the Zagg shield when it becomes available and do a comparison.
It's only money and it IS a $700 device.... (but I only paid $250 for it)
Stay tuned guys.
**Update
Just ordered a Zagg full body shield at 40% off as they just got them and were doing a Halloween special I guess. I should have the Cleat Coat on Mon/Tues and the Zagg will probably be here the week after. I think I'll install the Clear Coat first, use it for a week or so and then install the Zagg and do the same.
Can anyone who has purchased tell me if there is a cutout for the speaker on the front? Tah!
waaz1d said:
Can anyone who has purchased tell me if there is a cutout for the speaker on the front? Tah!
Click to expand...
Click to collapse
I don't have mine yet but why on earth would there NOT be a cutout for the earpiece???
My T-Mobile HD2 is in the mail - expect to get it Thursday. Sold my Fuze on ebay immediately after visiting the T-Mobile store. Have used Clarivues, Boxwaves but anyone have any experience with either on this phone - especially cutout and fit for the entire glass surface? Also anyone get either a Bodyguardz or InvisibleShield?
Zagg InvisibleShield is good.
stim141 said:
My T-Mobile HD2 is in the mail - expect to get it Thursday. Sold my Fuze on ebay immediately after visiting the T-Mobile store. Have used Clarivues, Boxwaves but anyone have any experience with either on this phone - especially cutout and fit for the entire glass surface? Also anyone get either a Bodyguardz or InvisibleShield?
Click to expand...
Click to collapse
I bought the crystal Boxwave screen protector and I like it. Even though on the website it says the screen is for the TMO version of the HD2, I have a feeling they're just shipping out the original HD2 screen protector; the screen protector is off by 1-2mm at the top. I don't mind though, the gap is negligible.
I have the full body invisishield on my HD2 and I use the stock rubber case that comes with the phone, and I really like it.
Things I've noticed:
The glass is a lot easier to clean as compared to the plastic cover.
The glass is easier (not lots, but noticeable) to slide your finger across.
There is a little more glare (once again, not a lot)
The awesome metal feel is gone (it would be gone if you had any cover, so really not an issue)
BUT! I had my iPhone 3G covered since day one and it is almost scratch free. You wouldn't know that it is almost 2 years old and lived in a pocket, so yeah. If you want to preserve your device and sell it in a couple of years as nearly perfect condition, I'd go for the full invisishield. If you want to have an awesome device that you'll probably just give to a little brother in a year, don't get the cover.
my 2 cents
p.s. just to make sure, I'm happy with my invisishield!
Im really happy with the INVISIBLEshield. had it on since 2nd week jan and really chuffed. Feels nice, seems to help with the screen sensitivity, but not enough to slow it down, and even though i dont use any case (full body zagg kit) there isn't even a faint scratch on it anywhere.
One corner has peeled away less than 1 millimeter where it slides into my pocket, BUT i mounted that corner badly anyway. (First panel applied)
Everywhere else its so snug it could be directly applied.
I have the screen sleeve provided by T-Mobile retailers... and the Body Glove transparent hard case w/ the kick stand on it.
But really, any screen protector will work out if put on correctly.
Thanks for the replies.
I contacted Martin Fields this afternoon and they were the most responsive. Actually measured their screen protectors and it is 1.5 or 2 mm too short for the Tmobile version - Based on measurements I took with micrometer they'll modify their specs and issue a full screen protector for the TMobile. Have used Clarivues (a little thick) and Boxwaves which I prefer - will see if they respond.
Honestly, in my experience the tmobile screen protectors sold at the stores have been awesome.
I have ghost armor (same if not better than invisible shield) on my blackberry, and they are good but still finger prints galore.
The tmobile ones sold in store are anti-smear. I clean my screen like after the whole day. It makes it a little bit fuzzy, and i mean a little like after you don't see your fingerprints after one use you'll love it and not even care.
stim141 said:
My T-Mobile HD2 is in the mail - expect to get it Thursday. Sold my Fuze on ebay immediately after visiting the T-Mobile store. Have used Clarivues, Boxwaves but anyone have any experience with either on this phone - especially cutout and fit for the entire glass surface? Also anyone get either a Bodyguardz or InvisibleShield?
Click to expand...
Click to collapse
I bought the InvisibleShield last night. Chose the cheap shipping, so I don't expect it in for a week or so.
In the meantime, I intend to try out the Saran Wrap® option that so many iPhone users have sworn by
I just ordered my full body protector from bestskinsever.com for $8 shipped. I have used it on my iphone, use it on my ipod touch, and laptop and I love it!
bored2nite said:
Honestly, in my experience the tmobile screen protectors sold at the stores have been awesome.
I have ghost armor (same if not better than invisible shield) on my blackberry, and they are good but still finger prints galore.
The tmobile ones sold in store are anti-smear. I clean my screen like after the whole day. It makes it a little bit fuzzy, and i mean a little like after you don't see your fingerprints after one use you'll love it and not even care.
Click to expand...
Click to collapse
I second that notion.
T-Mobile retail stores are always known for providing reliable products... at least from my location. My manager prides himself on that, so we do what we can to always have quality as opposed to quantity, especially when it comes to device accessories.
I put a skinomi skin on and love it, no bubbles, streaks, blemishes... lifetime guarantee as well. Fits perfect on my T-Mobile HD2
I bought the one from a Tmo store, I think it's the HTC branded one. It's real nice, although my screen protector does have scratches on it already from being in my pocket, but I'd rather have that than scratches on my actual screen.
The official t-mobile "antismear" screen protectors are not only $14.99 USD (+tax), which is way to expensive, but after placing them on the phone they create a "rainbow effect", meaning that it leaves tiny dots of distorted color until the screen protector is taken off. This "rainbow effect" is present on all screen protectors but usually disappear after 2-3 hours of use, in these screen protectors, not so, the "rainbow effect" is constant, even after the microbubbles have been worked out. This is a definite do not buy.
EDIT: you people.sure.are picky
i don't use them, but thanks for the heads up
someone told me a should get a case today too. but that's what the insurance is for IMO
realook. thats all i gotta say
Realook is alright, I like ZAGG's invisible shield personally.
tooken??? - I will submit it to urbandictionary.com
darkknight49 said:
realook. thats all i gotta say
Click to expand...
Click to collapse
I can vouch for this. I use a Realook and you can't even tell there's a protector on there.
lqaddict said:
tooken??? - I will submit it to urbandictionary.com
Click to expand...
Click to collapse
I think he meant "takified."
I think he meant "takified."[/QUOTE]
LOL. You 2 made my day.
lolcopter said:
i don't use them, but thanks for the heads up
someone told me a should get a case today too. but that's what the insurance is for IMO
Click to expand...
Click to collapse
dude, f that. i just gave up with asurion and told them where they can go. they will find any excuse to invalidate a claim. do NOT rely on them to be your safety net.
Just sayin....
I don't think it's any worse than most anti-glare/fingerprint screen protectors. The main bad thing is that it doesn't even cover the full screen. If you want anti-glare/fingerprint I would suggest the SGP Steinheil Anti-Fingerprint. But it will still have the speckling like the T-Mobile one.
If you want clarity and don't care about fingerprints as much then I would definitely recommend the Realook as well.
I am a minority on XDA... I ordered a few matte anti-finerprint SPs from eBay a few days ago. It doesnt do the beautiful screen as much justice as naked, but the fingerprints/smudges/greasy swipe lines make me crazy. I think the TMobile protectors sound like the ones I have but I haven't had any rainbow or bubble issues thankfully.
Sent from my SGH-T959 using XDA App
NikolaiT said:
Realook is alright, I like ZAGG's invisible shield personally.
Click to expand...
Click to collapse
I've had both, Zagg on my ipod touch and Realook on my vibrant. I prefer realook for the vibrant. Perhaps zagg has improved in the few years I've had my ipod.
I'm using the t-mobile anti smear screen protector. You do lose screen quality with it, but it's so nice having it hear in Miami with all the humidity the screen feels smooth most of the time. It's the only reason I got it to be honest, and I'll probably leave it on until I find a screen protector that is as smooth as this one
Man, I read "serious flaws" and all I could think about was maybe the ones they sell don't protect against scratches. That's a "serious flaw". Gunking up the displaying isn't that serious.
But anyway, I honestly just left the one that comes with the phone on. It's perfect. They are made a little too big though, so what I had to do was take it off, take a few mm off of the top, including the tab, and then take a few mm off of the side. I then ran it under hot water, used some dish detergent to wash the sticky side, rinsed real well, and laid it down, sticky side up, on a lint-free cloth to dry overnight. Once it's on and you have the gel case over it, you cannot tell it was ever cut. It looks beautiful and performs well.
Mine never came with screen protector lol
siirial said:
dude, f that. i just gave up with asurion and told them where they can go. they will find any excuse to invalidate a claim. do NOT rely on them to be your safety net.
Just sayin....
Click to expand...
Click to collapse
nexus one or galaxy s? i hear asurion is hit-or-miss with the nexus
i put a zagg invisible shield on my ipod touch when i bought it, but then one day i noticed a minor imperfection and kept messing with it until i got fed up and ripped the thing off completely
since then i've come to realize that i'm a bit too OCD for these things. almost 3 years later and my ipod touch screen is just fine. i'm sure my galaxy s will be fine too, especially after watching all those torture test videos.
a touchscreen was meant to be touched, IMO. don't let it share pockets with keys or anything else and you should be good to go
(/mini-rant)
I can't say that relying on insurance is that bright of an idea. An insurance replacement is going to cost you $150.00, UNLESS they find a way to deny your claim, and can be mitigated, with a $10.00 screen protector.
gokrisgo said:
I'm using the t-mobile anti smear screen protector. You do lose screen quality with it, but it's so nice having it hear in Miami with all the humidity the screen feels smooth most of the time. It's the only reason I got it to be honest, and I'll probably leave it on until I find a screen protector that is as smooth as this one
Click to expand...
Click to collapse
Are these the ones you're using?
EDIT: Imag upload fail ill try again here in a minute
returnofsid said:
I can't say that relying on insurance is that bright of an idea. An insurance replacement is going to cost you $150.00, UNLESS they find a way to deny your claim, and can be mitigated, with a $10.00 screen protector.
Click to expand...
Click to collapse
i wouldn't file an insurance claim for a scratched screen. i just don't see a scratched screen happening anytime soon *knock on wood*
if there was some imperfection or malfunction i would probably try to find a reason to use the extended warranty. or, as the guy at the t-mobile store said, i could "hit the phone into the ocean with a golf club, and get a new one for $120."
lolcopter said:
or, as the guy at the t-mobile store said, i could "hit the phone into the ocean with a golf club, and get a new one for $120."
Click to expand...
Click to collapse
I'm sure he followed that with -- "wink, wink". (I just signed up for TMO's insurance, so I have the fine print in front of me -- naturally, "intentional loss or damage" is excluded... but he knew that, of course).
Hmm, I see that "cosmetic damage" ("cracking, marring, or scratching") that "does not affect the manufacturer's intended use" is also excluded. So this wouldn't help for a cracked screen, as long as the phone isn't bricked or acting funky as a result.
I wouldn't rush to file a claim unless I really needed to... hate the thought of holding a refurbed phone to my ear that's been in someone's ass pocket. But if I really lost or destroyed mine, guess a $130 refurb beats a $500 new one...
Just like the topic. Do you think you need screen protector or tempered glass? I had awful experience with S6 Edge when trying to use screen protector and curved tempered glass.
I don't have the phone yet, but I have an HTC one m8 and I haven't been using a case or screen protector for as long as I can remember. I have no damage or scratches to the screen whatsoever, and this is Gorilla Glass 3, I would think the Gorilla Glass 4 on the S7 edge would be much better.
Based on tests I've seen on YouTube, the screen appears to be very good at resisting scratches. I'll still be using a screen protector to be on the safe side,.
Yeah, I don't like screen protector. However, the phone is really hard to fix this though. So I wouldn't take the risk.
I have always used some sort of screen protection on all my phones however this time around I'm gonna go naked. I think it will take away some of the wow of the handset.
Yes, absolutely no doubt. Just the tiniest of marks on a screen bother the hell out of me, so I put a screen protector on and change it once every month or two. Pity the glass ones on curved screen phones never make the grade and don't sit properly.
Beefheart said:
Yes, absolutely no doubt. Just the tiniest of marks on a screen bother the hell out of me, so I put a screen protector on and change it once every month or two. Pity the glass ones on curved screen phones never make the grade and don't sit properly.
Click to expand...
Click to collapse
I have used tempered glass as well .. but if they are not good on S7 Edge ... what we gonna use this time. Don't fancy putting on the tacky plastic ones
I've checked out videos of traditional film protectors being applied to the S6 Edge, and it seems a tricky process but one that, if done properly, will result in a very good finish. I've been my family and friends go to for applying screen protectors for years, so I'm confident I'll get them on ok.
Beefheart said:
I've checked out videos of traditional film protectors being applied to the S6 Edge, and it seems a tricky process but one that, if done properly, will result in a very good finish. I've been my family and friends go to for applying screen protectors for years, so I'm confident I'll get them on ok.
Click to expand...
Click to collapse
Well, hopefully Vodafone (for us) start shipping soon, and we can get to try them out. If you do find a good one, then you probably would anyway, but share the link
albie999 said:
Well, hopefully Vodafone (for us) start shipping soon, and we can get to try them out. If you do find a good one, then you probably would anyway, but share the link
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=65632079&postcount=468
Don't hold your breath. In fact, I'd get on the phone to them and make sure it's not happening with your order as well. I only know one other Vodas**t UK member on here who pre-ordered the S7, and his was stuck too.
Beefheart said:
http://forum.xda-developers.com/showpost.php?p=65632079&postcount=468
Don't hold your breath. In fact, I'd get on the phone to them and make sure it's not happening with your order as well. I only know one other Vodas**t UK member on here who pre-ordered the S7, and his was stuck too.
Click to expand...
Click to collapse
Oh crap, I hope that does not happen to ours, as mine is still in that state on the order tracking page
albie999 said:
Oh crap, I hope that does not happen to ours, as mine is still in that state on the order tracking page
Click to expand...
Click to collapse
Told you mate, get on the phone to them now. They're so utterly useless, you won't find out there is an issue with your order until it's not delivered by the 11th and you call them to find out where it is. By which time you will need to wait another couple of weeks. And don't use Live Chat.
Despite what I was told this morning, I have zero confidence I'll get mine and the wife's handsets by the 11th.
I'm using one. All it takes is one little piece of sand, or a sliding drop on concrete.
Normally, I prefer tempered glass. We'll see if any good ones become available soon. For now, I'm using the Skinomi. I put it on Tuesday night, and wow did it look like crap. 24 hours later, though, it looked really good. And now, even better. Strange magic.
Beefheart said:
Told you mate, get on the phone to them now. They're so utterly useless, you won't find out there is an issue with your order until it's not delivered by the 11th and you call them to find out where it is. By which time you will need to wait another couple of weeks. And don't use Live Chat.
Despite what I was told this morning, I have zero confidence I'll get mine and the wife's handsets by the 11th.
Click to expand...
Click to collapse
Right then, I have just spoken to them, and they have "assured" me that the phone will be delivered on the 8th March, as promised .... suppose will just have to wait and see
albie999 said:
Right then, I have just spoken to them, and they have "assured" me that the phone will be delivered on the 8th March, as promised .... suppose will just have to wait and see
Click to expand...
Click to collapse
Sounds like what I was told on Tuesday via live chat with someone in India I think. I'm not sure if it makes a difference, but the woman I spoke to this morning was in the UK, and when I brought up what I'd been told on Live Chat, she specifically stated that Live Chat is always with someone in another country, as if that made a difference. Perhaps the information they have access to is different? Either way, we're off topic in this thread so fingers crossed you get yours on the 8th. I suspect that will be before mine, despite my call this morning.
Wonder if screen protectors and tempered glass will affect the quality of viewing for gear vr.
if putting on a screen protector...
I also do not like to use screen protector. I do not use one on my ipad. However, for a phone which are more likely to be put into a pocket with keys and other hard object, I do think it is wise to use one . Also, it all depends on how you use your phone.
I have used "ArmorSuit MilitaryShield" brand of protector on my Camera screen (LX100) and on my Microsoft Band 2 screen. And i don't even notice I have a protective film on those screens, it does not make the screen feel tacky. A side benefit of having the protector on my Band is the finger print doesn't seem to be a problem anymore.
Definitely should. No matter what Gorilla Glass version it uses, you will always get hairline scratches. Always. No matter how careful you are.
I don't use cases at all 'cause it takes away from the beauty of a nicely designed phone.
I have the Note 5 currently and on the front I have the Mime Feather+ Glass screen protector. Amazing stuff. Highly recommended. However though, I may opt for a film screen protector to start until Mime comes out with an all clear glass in the Feather+ line. I looked at their S6 Edge product line and they only have the Feather Glass and the glass have different colors along the top, sides and bottom; I want an all clear glass.
On the back of the phone, I've used a film protector called Clear Coat. My local phone dealer uses Clear Coat so I had them put it on for me. It's super thin, edge to edge, and feels great. I may have them put it on the front for me as well when I get my S7 Edge.
ekjl said:
I don't use cases at all 'cause it takes away from the beauty of a nicely designed phone.
On the back of the phone, I've used a film protector called Clear Coat. My local phone dealer uses Clear Coat so I had them put it on for me. It's super thin, edge to edge, and feels great. I may have them put it on the front for me as well when I get my S7 Edge.
Click to expand...
Click to collapse
But drop that phone onto a hard surface (which even the most careful person does occasionally) and that nice Clear Coat protection on the back may as well not be there. Unless you're very fortunate, you will have dents and marks on the outside edge or, worse, a cracked back or screen. The key for me is balancing the look and feel of a premium phone with protection. And a thin, transparent protecting cover like the Spigen Liquid Crystal is perfect for that. You keep the overall look of the phone, but combined with protection for all but the most severe accidents.
Just like most folks here wouldn't take the chance of running it naked. Have one on its way. For now this would suffice http://www.amazon.com/dp/B01BG2EJYS/ref=pe_861660_138883610_fxm_4_0_n_id until there's a good TGSP out there! Hopefully, they'd come up with something really soon!