[Q] Help! Alternate link for latest GApps!! - PAC Q&A

Hi there,
I am very much interested in flashing the PAC Rom for my i9100, currently on Stock ROM.
After reading through all the notes and instructions, when I search for the latest GApps (20130812), goo.im says "file not found".
Can somebody point out any alternate link for GApps?
Can we use the GApps that is the recent one available i.e gapps-jb-20130301-signed.zip ?
Also, as per my understanding "pac_i9100-milestone.1.RC1.zip" is the latest release build for 4.2. Am I right?
I want to use the release build as my daily driver, hence a bit apprehensive to switch from official ROMs
Thanks in advance.

if its for android v4.2.2
this one should do it
gapps-jb-20130812-signed.zip - 96.08 MB

racky29 said:
if its for android v4.2.2
this one should do it
gapps-jb-20130812-signed.zip - 96.08 MB
Click to expand...
Click to collapse
Thanks. This is exactly what I was searching for.
This file is shown as "not found" on the goo.im site.

Related

[Q&A] [ROM][A500 & A501] Android 4.4.4 (OmniROM unofficial)

Q&A for [ROM][A500 & A501] Android 4.4.4 (OmniROM unofficial)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][A500 & A501] Android 4.4.4 (OmniROM unofficial). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Android 4.4.4 on Acer A500 Working Partially
I was running ICS 4.03 and installed the 4.4.4 from this thread:
http://forum.xda-developers.com/showthread.php?t=2705989
Using Skrilax V9 bootloader and CWM 6.0.4.5.
Omnirom Kitkat loads up fine but cannot restore apps through Titanium Backup and as it reports no Root access.
Also Google Play cannot locate this device but I can log in and see my apps using the stock Browser that was installed.
Made several attempts with Google Android Manager to no avail.
I assume this custom ROM has root access correct? If true, don't understand why Titanium Backup is complaining.
Location is set for Wi-Fi and mobile network to determine location.
So for now cannot restore my apps locally via Titanium Backup until I get to the bottom of the issue.
Your guidance appreciated as well as the work to make this ROM available to such a broad audience.
DISREGARD, I am getting everything working in the light version.
Rom for Acer A500
Hello I am new to the forum and also the modding and not perlo language very well.
I tried to flash the recovery "update-recovery-thor2002ro-rev1.7.3" the "OmniROM-4.4.4-Tegraowners ROM v21" the work went well but sometimes I crash.
Can you tell me what is currently the OmniROM 4.4.4 better and more stable than those in the first page, and if I can flash with the current recovery, (update-recovery-thor2002ro-rev1.7.3), pointing to the steps to do because I lost in the discussion not knowing the language in fact I am using the translator.
thanks
Hello!
I can flash the OmniROM KitKat front page having the recovery "update-recovery-thor2002ro-rev1.7.3"?
thanks
ugor84 said:
Hello I am new to the forum and also the modding and not perlo language very well.
I tried to flash the recovery "update-recovery-thor2002ro-rev1.7.3" the "OmniROM-4.4.4-Tegraowners ROM v21" the work went well but sometimes I crash.
Can you tell me what is currently the OmniROM 4.4.4 better and more stable than those in the first page, and if I can flash with the current recovery, (update-recovery-thor2002ro-rev1.7.3), pointing to the steps to do because I lost in the discussion not knowing the language in fact I am using the translator.
thanks
Click to expand...
Click to collapse
I used the instructions found at the beginning of the 4.4.4 Light version thread as the full version gave me issues. I didn't use the Thor recovery, Skrilax version 9 instead.
http://forum.xda-developers.com/showthread.php?t=2792022
GPS not working
I am using A500 and I have instaled Android 4.4.4 ROM based on Omnirom KitKat (build 6).
The instalation was successfully completed, I think so because there was no errors. This is my first time so I havent any expirience.
See attachment pictures...there is no GPS. Any sugestion, why?
Thanky you.
EDIT: I add one more picture to see how it was before.
gapps for omni ROM 4.4.4
I just got these gapps to work on my a500
http://forum.xda-developers.com/showthread.php?t=2397942
I had to wipe the system and reflashed the ROM and gapps
I'm using the pico version. Hope that helps
Sent from my Acer iconia A500
Great rom
jenko1447 said:
I just got these gapps to work on my a500
http://forum.xda-developers.com/showthread.php?t=2397942
I had to wipe the system and reflashed the ROM and gapps
I'm using the pico version. Hope that helps
Sent from my Acer iconia A500
Click to expand...
Click to collapse
Wasnt sure where to say thanks. So I decided to put it here. Thanks for all the hard work the rom is awesome!!
Can I install build 8 overtop of build 6?
Can I install build 8 overtop of build 6? What I mean by that is can I install build 8 without wipeing data in CWM because I already have build 6 installed and I have the same ROM so can I?
Loss of Root
Has anyone else lost root with build 8?
flickering screen with Facebook?????
I installed v6 of omni ROM on my Acer a500, and just updated to the newest version. Both ROMs are am some and smooth, but I have just one issue when I have Facebook open for a few minutes, I go to scroll down then the screen starts to flicker and I can't do anything. And to use it again I have to reboot otherwise I just get a black screen. It happens on both versions of the ROM, anyone else have this issue???. Thanks for any replies
Hello , I am trying to flash this rom on my Acer a500 and I get this error :
This package is for "picasso.a500" device this is a "ventana".
E:error
Status (7)
Could anyone help me with this issue?
Lockups
yeah i have been having a few issues along the same lines, i think its more to do with disk 'bandwidth' usage than the cpu. With low data throughput apps running it will run for days without issue, start downloading at 500kB/s (or sometimes as little as 370kB/s) and do some other disk intensive task and pop its gone! this could be biased a bit by my experience of it as i quite often use the A500 to dl things or load it up with stuff before a journey etc.. have also had it get stuck in deep sleep modes but think thats the disk issue as well...
Could it be overfilling it disk buffers or something? not much experience with android hardware but this tablets a bit old now and new roms may be expecting the inbuilt storage to be performing a little faster than the a500's can deal with
Also have tried all the available i/o schedulers and none seem to have and noticeable difference in time between hangs, although without bothering to setup proper test conditions i cant really say much really
oops was meant to be in reply to http://forum.xda-developers.com/showpost.php?p=60787006&postcount=293 meh....
LNX partition not loading?
Hello and sorry if it's an easy question but it's my first time trying to install roms. I've followed http://forum.xda-developers.com/showthread.php?t=2705989 to install OmniRom 4.4.4 on my iconia A500. I installed Skrilax bootloader V9 and then CWM 6.0.4.5 on my device and up to now everything worked well. I then put OmniRom 4.4.4 build 8 and gapp pico on a micro sd card, wiped data using CWM then install the rom (from /storage/sdcard1) then installed the gapp (also from /storage/sdcard1), then wiped cache partition and rebooted. I've been stuck on the Skrylax "booting android image from LNX partition" for half an hour now... Where did I make a mistake?
Stuck on startup logo
hi
please help me
i installed kitkat ROM and mini gapss
and after restarting the tab stucked in startup logo
what is the cause & what shall i do to overcome that
and thx
Step by step guide
Hi guys. i'm a noob at this. i had earlier successfully rooted by Samsung Galaxy S Plus with CyanogenMod, but am at my wits end with rooting my A500. The process seems very complicated, with each page leading to another and resulting in multiple downloads. could someone please give a step by step guide with all downloads listed in sequence. screenshots would be great help. thanks in advance.
Using TWRP-2.6.3.0 to install Omni 4.4.4
Hi all,
Just want to know if it does matter to use TWRP-2.6.3.0 (instead of 2.6.3.1) to install Omni 4.4.4...???
Anyway, the installation went through w/out any issue. I'm using my revived Acer-A500 (was bricked for almost 2 yrs).
W/out this XDA-Dev's great resource, I would not be able to revive my bricked Acer-A500 & running Omni 4.4.4 (CM-11) now.
Many thanks to everyone on the board, especially, Skrilax, blackthund3r, civato & all the great XDA-Dev team...!!!
Cheers,
JKS

[Q] OmniROM 5.1.1 A500/A501 - V9 - Lollipop Rooting

Found Answer (below) disreguard this:
"Newbie", also I was also drop on my head when I was very young, so please explain as though I'm a 5 year old:
I installed rom and it works great. However I do not have root, near does any app or adb/fastbook code I have tried work to root this.
How or can this be rooted manual or with an app?
Remember, I am very slow learner.
A500 - 5.1.1 20150623 v9
CMM Recovery v5.5.5.0.x rev.7.3 (couldn't install newest version so I just picked an old one).
Skrilax CZ V8 (get an Second kernel image error: Invalid secondary (AKB) kernel image).
However I boot the primary, other than that and not being able to see a root ???
Answer: Found UPDATE-SuperSU-v2.46.zip and installed it in recovery.
Worked like a charm, I'm back in business.
wally wingnut said:
Found Answer (below) disreguard this:
"Newbie", also I was also drop on my head when I was very young, so please explain as though I'm a 5 year old:
I installed rom and it works great. However I do not have root, near does any app or adb/fastbook code I have tried work to root this.
How or can this be rooted manual or with an app?
Remember, I am very slow learner.
A500 - 5.1.1 20150623 v9
CMM Recovery v5.5.5.0.x rev.7.3 (couldn't install newest version so I just picked an old one).
Skrilax CZ V8 (get an Second kernel image error: Invalid secondary (AKB) kernel image).
However I boot the primary, other than that and not being able to see a root ???
Answer: Found UPDATE-SuperSU-v2.46.zip and installed it in recovery.
Worked like a charm, I'm back in business.
Click to expand...
Click to collapse
Could you pls share the source to get the "trusted & reliable" Omni 5.1.1 ROM?
jksmith0011 said:
Could you pls share the source to get the "trusted & reliable" Omni 5.1.1 ROM?
Click to expand...
Click to collapse
No, he wouldn't play nice with XDA rules, so no mention of his work allowed sadly.
can anyone post a download link?
ldeveraux said:
No, he wouldn't play nice with XDA rules, so no mention of his work allowed sadly.
Click to expand...
Click to collapse
Why not?
I try also to get the latest omnirom but cant even register at "Tegraowners" to get a download.

I would like to update Cyanogenmod 10.2.1. jfltespr Sprint

I would like to update my S4 to Lineage OS 14.1 and I have an older version of TWRP 2.8.4.0 recovery on my phone. What is the best way to upgrade to the newer ROM? Do I need to update TRWP recovery in order to install Lineage OS 14.1 or will it work with the older version? Its been a while since updating my phone could you someone point me in the right direction.
Update,
I've tried updating to a newer version of twrp via the app store and downloading the new update. For some reason when I browse from the file from twrp cannot find the img file. Any idea of why this is, I save files to specific directory where I can find them.
Thanks
I am in the same boat, however I am currently on cyanogenmod 13.
Where did you find v14.1 for jfltespr?
FYI I set it and forget it and try to update to the latest greatest yearly.
I am under the impression that there is no active maintainer for lineageOS however it appears to have forked.
so far I have found these options:
OCTos: https://forum.xda-developers.com/galaxy-s4-sprint/orig-development/rom-team-octos-oct-n-t3537546
Vanir & Commotio: https://forum.xda-developers.com/galaxy-s4-sprint/development/rom-vanir-commotio-05-30-2017-t3614632
I am torn, I want the latest (and acquire the security updates) but I know little to nothing of either of the two above;
plus I am very rusty in trying new ROMS.
would be interested to see what you come up with
I did come across this, but not sure about installing it. I'm on a older version twrp, didnt know if the latest version is required to install some of the newer roms.
https://androidjungles.com/install-...icial_Android_Nougat_ROM_In_Samsung_Galaxy_S4
If you use twrp recovery, how were you able to update it? It keeps failing for me.
i am not so sure that the link is for a jfltespr
seems to be for a different device jfltexx (the international version).... see http://www.lineageosrom.com/2016/12/list-of-devices-getting-official.html
qu1nn said:
i am not so sure that the link is for a jfltespr
seems to be for a different device jfltexx (the international version).... see http://www.lineageosrom.com/2016/12/list-of-devices-getting-official.html
Click to expand...
Click to collapse
Yea I know, I kind of figured that.

Unable to flash latest pie custom rom on max pro m1

I tried flashing RR ,pixel os & havoc OS latest build but I get error "this package requires firmware version 16.2017.1903.050 or newer "
how to solve this issue without going back to stock rom?
Flash this firmware first.
Then proceed to flash your rom.
I was on stock 340 and flashed FW 53 to install pixelexperience but after installation during the first boot, the screen goes black during Google setup
dr.faramroze said:
I was on stock 340 and flashed FW 53 to install pixelexperience but after installation during the first boot, the screen goes black during Google setup
Click to expand...
Click to collapse
the google apps get often crashed , similar crash also happened on patching gapps with lineageos & others os too
dr.faramroze said:
I was on stock 340 and flashed FW 53 to install pixelexperience but after installation during the first boot, the screen goes black during Google setup
Click to expand...
Click to collapse
Hi , i am having similar problem,how should i solve this issue ?
Also have sent you DM.
akhil17kr said:
Hi , i am having similar problem,how should i solve this issue ?
Also have sent you DM.
Click to expand...
Click to collapse
Either go back to stock ROM update to latest version of stock ROM & them redo all process
Else find FW53 & install it via twrp, then It will allow installation of pie roms
SholiSJ said:
Either go back to stock ROM update to latest version of stock ROM & them redo all process
Else find FW53 & install it via twrp, then It will allow installation of pie roms
Click to expand...
Click to collapse
bro just flash the stock oreo 8.0 rom and update manually to pie by download and past the update zipfile ni your internal memory then it will update the os for step by step
sai_kumar said:
bro just flash the stock oreo 8.0 rom and update manually to pie by download and past the update zipfile ni your internal memory then it will update the os for step by step
Click to expand...
Click to collapse
yes, i did that already before your reply
BTW do you have any experience using f2fs partition ?
akhil17kr said:
yes, i did that already before your reply
BTW do you have any experience using f2fs partition ?
Click to expand...
Click to collapse
watch this video bro i'l provide link to you
Tried it, didn't work
I am stuck and no youtube video or google search is helping me. I am unable to flash any rom. I am getting the error-
This package requires firmware version 16.2017.1910 or newer.
And when I try to update the firmware, it is still not working.
I have downloaded stock firmware from various sources, but when I try to flash, I get the error-
This package is for "15.2016.1902.340" devices; this is a " ".
Sometimes I get the error
This package is for "Asus X00TD", this is "x00TD"
To inform you, I do have "15.2016.1902.340"
iphonewarga said:
I am stuck and no youtube video or google search is helping me. I am unable to flash any rom. I am getting the error-
This package requires firmware version 16.2017.1910 or newer.
And when I try to update the firmware, it is still not working.
I have downloaded stock firmware from various sources, but when I try to flash, I get the error-
This package is for "15.2016.1902.340" devices; this is a " ".
Sometimes I get the error
This package is for "Asus X00TD", this is "x00TD"
To inform you, I do have "15.2016.1902.340"
Click to expand...
Click to collapse
seems like the info that is required by firmware to verify device is removed , anyway try searching for firmware update size about 50-60mb ,I'm sorry don't remember the site or package name but it is possible to upgrade to higher version of android without going back to stock.
{Mod edit: Link removed} try packages from here

Samsung Galaxy Tab 4(SM-T530) with Android 5.0.2 looking for newer Android version

Hi, as the title says I have a Samsung Galaxy Tab 4(SM-T530) with Android 5.0.2 and I wonder if it is possible to have a newer Android version installed on it? Or maybe a custom rom?
I have done some searching but I can't find the required info.
Thanks for any help.
I did search but cannot find anything...help is appreciated.
Nobody who knows?
There are none which are terribly up-to-date, but I'm using https://forum.xda-developers.com/tab-4/development/rom-resurrection-remix-5-8-0-t3544283 and there's also https://www.cyanogenmods.org/forums/topic/lineage-os-14-1-galaxy-tab-4-10-1-wifi-android-7-1-rom/ .
sandalle said:
There are none which are terribly up-to-date, but I'm using https://forum.xda-developers.com/tab-4/development/rom-resurrection-remix-5-8-0-t3544283 and there's also https://www.cyanogenmods.org/forums/topic/lineage-os-14-1-galaxy-tab-4-10-1-wifi-android-7-1-rom/ .
Click to expand...
Click to collapse
Try this rom witch I made witch has working camera & microphone but no Skype yet, no bloat, very little lag, and come with gapps, Open Camera, Pixel Launcher, Pixel Icons fot scock LineageOS apps https://forum.xda-developers.com/ta...ht-project-t3877643/post78389814#post78389814
Another Newbie with questions
DJABHipHop said:
Try this rom witch I made witch has working camera & microphone but no Skype yet, no bloat, very little lag, and come with gapps, Open Camera, Pixel Launcher, Pixel Icons fot scock LineageOS apps https://forum.xda-developers.com/ta...ht-project-t3877643/post78389814#post78389814
Click to expand...
Click to collapse
Hi DJABHipHop,
Thanks for all the work you've done.
I have a Sumsung SM-T530 (matissewifixx)
OS: Lollipop 5.0.2
Bootloader: T530XXU1BQB2
After a quick learning curve I've been following the https://www.getdroidtips.com/lineage-os-17-1-galaxy-tab-4-10-1#Pre-Requirements article:
1) Used Odin3-v3.10.6.exe to root my device
2) Installed the latest TWRP 3.0.0-0-.matisse.img <-- It appears you're using a newer version (TWRP-3.2.3-0_matissewifi-180918.img) - question to follow
3) Attempted (unsuccessfully) to install the lightning-17.1-20201012-UNOFFICIAL-matissewifi-Unsweetened-XDA-BUILD
I receive an Error 7 - basically not identifying my device correctly from what the error says
Now the article actually mentions this exact issue...
To install Lineage OS 17.1 on your Samsung Galaxy Tab 4 10.1, you need to unlock bootloader and running the latest TWRP Recovery. If you are on the old version, you will see error 7 warning text while installing the custom ROM on Galaxy Tab 4 10.1 (matisse) device.
Click to expand...
Click to collapse
Because I'm new to this whole process, I want to be sure I am doing the right thing (don't want to brick the device)
Do I need to use the TWRP version you reference in https://forum.xda-developers.com/tab-4/development/samsung-galaxy-tab-4-light-project-t3877643/post78389814#post78389814?
srekcuSuoY said:
Hi DJABHipHop,
Thanks for all the work you've done.
I have a Sumsung SM-T530 (matissewifixx)
OS: Lollipop 5.0.2
Bootloader: T530XXU1BQB2
After a quick learning curve I've been following the https://www.getdroidtips.com/lineage-os-17-1-galaxy-tab-4-10-1#Pre-Requirements article:
1) Used Odin3-v3.10.6.exe to root my device
2) Installed the latest TWRP 3.0.0-0-.matisse.img <-- It appears you're using a newer version (TWRP-3.2.3-0_matissewifi-180918.img) - question to follow
3) Attempted (unsuccessfully) to install the lightning-17.1-20201012-UNOFFICIAL-matissewifi-Unsweetened-XDA-BUILD
I receive an Error 7 - basically not identifying my device correctly from what the error says
Now the article actually mentions this exact issue...
Because I'm new to this whole process, I want to be sure I am doing the right thing (don't want to brick the device)
Do I need to use the TWRP version you reference in https://forum.xda-developers.com/tab-4/development/samsung-galaxy-tab-4-light-project-t3877643/post78389814#post78389814?
Click to expand...
Click to collapse
3.0.0-0 isn't the latest TWRP. Check https://forum.xda-developers.com/tab-4/development/recovery-twrp-recovery-matisse-millet-t4019831 and install matisse version. Then, you can install lfr 17.1 or los 16.
And to get more precise informations, check always XDA, not external bad blogs...
matteo0026 said:
3.0.0-0 isn't the latest TWRP. Check https://forum.xda-developers.com/tab-4/development/recovery-twrp-recovery-matisse-millet-t4019831 and install matisse version. Then, you can install lfr 17.1 or los 16.
And to get more precise informations, check always XDA, not external bad blogs...
Click to expand...
Click to collapse
Thanks matteo,
Your tip/link has worked I've now upgraded to twrp-3.4.0-3-matisse and the 17.1 OS install has now been successful.
Good advice on the 'external' blogs... my next step is to install the 'GApps', that 'external' blog suggested some more external links to get the right Apps, more confusing for a newbie that the original article...
any advice would be greatly appreciated.
srekcuSuoY said:
Thanks matteo,
Your tip/link has worked I've now upgraded to twrp-3.4.0-3-matisse and the 17.1 OS install has now been successful.
Good advice on the 'external' blogs... my next step is to install the 'GApps', that 'external' blog suggested some more external links to get the right Apps, more confusing for a newbie that the original article...
any advice would be greatly appreciated.
Click to expand...
Click to collapse
opengapps.org --> arm 10 pico // and you are good to go
looking for a rom with android 9
is it possible or not?
found nothing
Medical Detective said:
looking for a rom with android 9
is it possible or not?
found nothing
Click to expand...
Click to collapse
If you aren't able to search on XDA... https://forum.xda-developers.com/t/rom-unofficial-matisse-millet-lineageos-16-0.4032901/

Categories

Resources