Unable to flash latest pie custom rom on max pro m1 - Asus ZenFone Max Pro M1 Questions & Answers

I tried flashing RR ,pixel os & havoc OS latest build but I get error "this package requires firmware version 16.2017.1903.050 or newer "
how to solve this issue without going back to stock rom?

Flash this firmware first.
Then proceed to flash your rom.

I was on stock 340 and flashed FW 53 to install pixelexperience but after installation during the first boot, the screen goes black during Google setup

dr.faramroze said:
I was on stock 340 and flashed FW 53 to install pixelexperience but after installation during the first boot, the screen goes black during Google setup
Click to expand...
Click to collapse
the google apps get often crashed , similar crash also happened on patching gapps with lineageos & others os too

dr.faramroze said:
I was on stock 340 and flashed FW 53 to install pixelexperience but after installation during the first boot, the screen goes black during Google setup
Click to expand...
Click to collapse
Hi , i am having similar problem,how should i solve this issue ?
Also have sent you DM.

akhil17kr said:
Hi , i am having similar problem,how should i solve this issue ?
Also have sent you DM.
Click to expand...
Click to collapse
Either go back to stock ROM update to latest version of stock ROM & them redo all process
Else find FW53 & install it via twrp, then It will allow installation of pie roms

SholiSJ said:
Either go back to stock ROM update to latest version of stock ROM & them redo all process
Else find FW53 & install it via twrp, then It will allow installation of pie roms
Click to expand...
Click to collapse
bro just flash the stock oreo 8.0 rom and update manually to pie by download and past the update zipfile ni your internal memory then it will update the os for step by step

sai_kumar said:
bro just flash the stock oreo 8.0 rom and update manually to pie by download and past the update zipfile ni your internal memory then it will update the os for step by step
Click to expand...
Click to collapse
yes, i did that already before your reply
BTW do you have any experience using f2fs partition ?

akhil17kr said:
yes, i did that already before your reply
BTW do you have any experience using f2fs partition ?
Click to expand...
Click to collapse
watch this video bro i'l provide link to you

Tried it, didn't work
I am stuck and no youtube video or google search is helping me. I am unable to flash any rom. I am getting the error-
This package requires firmware version 16.2017.1910 or newer.
And when I try to update the firmware, it is still not working.
I have downloaded stock firmware from various sources, but when I try to flash, I get the error-
This package is for "15.2016.1902.340" devices; this is a " ".
Sometimes I get the error
This package is for "Asus X00TD", this is "x00TD"
To inform you, I do have "15.2016.1902.340"

iphonewarga said:
I am stuck and no youtube video or google search is helping me. I am unable to flash any rom. I am getting the error-
This package requires firmware version 16.2017.1910 or newer.
And when I try to update the firmware, it is still not working.
I have downloaded stock firmware from various sources, but when I try to flash, I get the error-
This package is for "15.2016.1902.340" devices; this is a " ".
Sometimes I get the error
This package is for "Asus X00TD", this is "x00TD"
To inform you, I do have "15.2016.1902.340"
Click to expand...
Click to collapse
seems like the info that is required by firmware to verify device is removed , anyway try searching for firmware update size about 50-60mb ,I'm sorry don't remember the site or package name but it is possible to upgrade to higher version of android without going back to stock.
{Mod edit: Link removed} try packages from here

Related

Smartzen rom!Custom rom android M ze551ml from first beta MM

Hello looking for a stable rom of android 6.0.1 i found this rom from a russian forum but google translate do some mistake in french
So if people can tell me if it's possible to flash this rom with twrp on a z00a running cm13 please help me
I give you the link of this rom smartzen rom
http://4pda.ru/forum/index.php?showtopic=679173&view=findpost&p=46438423
Waiting for the answer
Sent from my ASUS_Z00AD using Tapatalk
I wanna know as well. Let's hope someone who is Russian will help
I don't know if i try flash it or not..
Here the link for 1.1 ver: https://yadi.sk/d/eqVrS13UtZvB5
Installation Instructions
Tested installation through TWRP over beta 6 and 184th - everything went well.
0. Having installed TWRP
1. Make backup data
2. Make a factory reset
3. Sew the firmware and the addons, if they are needed
4. Recover data (in piercing with 5ki because this can cause errors, it is desirable to put clean) (WTF? I dont understand russian)
5. Enjoy
Known bugs
-Gesture inclusion movement in zenmotion may cause reboot when a call reception
- Somewhat works Mobilemanager: no animation at the close of the recent + no animation when you press the Clear button in the application itself
Click to expand...
Click to collapse
Add-ons (are in Yandex link)
- AsusEmail
Returns Asus e-mail. Put, if you want the display of new messages in the window firm cover.
- AsusSoundRecorder
Returns Asus Recorder. We need to record calls.
- AsusSplendid
Setting color. Removing lead to black screen on some games and videos.
- AsusThemeApp
Installer + the default theme + black teia contacts.
-AudioWizard
Setting sound transmission.
- CertInstaller
installer certificates (and other sites).
- HDMI
Playback on TV
- HTMLViewer
viewer html-pages
- LiveWalpapers
- MobileManager
startup Setting and clearing RAM.
- NFC
Returns applications associated with NFC.
- PlayTo
Playing audio / video on other device
- PowerSaving
Power Save Mode from Asus.
PrintSpooler
print spooler. You can download from Google Play
Click to expand...
Click to collapse
Changelog
* Miscellaneous:
¤Kernel from Borets24 on 27/7/2016
¤SuperSU updated to version 2.76
¤Systemless Xposed version 86.2
¤Ikonki Nachtroyki (WTF) applications, FM-radio,
the Asus View Take the Flip the Cover in the style of the new ZenUI
* Interface system:
¤Ubral charge display in curtain
¤Dobavlena shifts the panel curtain with
calendar and volume of media
¤Stil Asus Zenfone 3 * Settings ¤Ikonka item memory from Asus Zenfone 3 * Asus View Flip cover ¤Obnovlena one theme and some icons (in the style of Asus Zenfone 3)
Click to expand...
Click to collapse
Dan_Jacques said:
Here the link for 1.1 ver: https://yadi.sk/d/eqVrS13UtZvB5
Installation Instructions
Tested installation through TWRP over beta 6 and 184th - everything went well.
0. Having installed TWRP
1. Make backup data
2. Make a factory reset
3. Sew the firmware and the addons, if they are needed
4. Recover data (in piercing with 5ki because this can cause errors, it is desirable to put clean) (WTF? I dont understand russian)
5. Enjoy
Known bugs
Add-ons (are in Yandex link)
Changelog
Click to expand...
Click to collapse
Did you test it?
moomoon03 said:
Did you test it?
Click to expand...
Click to collapse
Downloading. But my internet connection is a crap, even with free Yandex account the download is at 24KB/s.
Dan_Jacques said:
Downloading. But my internet connection is a crap, even with free Yandex account the download is at 24KB/s.
Click to expand...
Click to collapse
Oh ok and what firmware are you using now?
I am on RR 5.7.1 it's a nice rom but i am sad with game performance and i miss asus cover to be honest
moomoon03 said:
Oh ok and what firmware are you using now?
I am on RR 5.7.1 it's a nice rom but i am sad with game performance and i miss asus cover to be honest
Click to expand...
Click to collapse
I'm at RussiaNBeaR 7.3, based on stock .184 firmware. I miss the PixelMaster app in the RR (and, more precisely, XOSP - my preferred rom), so I come back to stock based. Apparently you can jump from .184 and the first MM build to this ROM (Google Translate, please dont fool me).
Dan_Jacques said:
I'm at RussiaNBeaR 7.3, based on stock .184 firmware. I miss the PixelMaster app in the RR (and, more precisely, XOSP - my preferred rom), so I come back to stock based. Apparently you can jump from .184 and the first MM build to this ROM (Google Translate, please dont fool me).
Click to expand...
Click to collapse
Idk if after a full wipe i can install it after my RR cause i don't want lose my twrp
moomoon03 said:
Idk if after a full wipe i can install it after my RR cause i don't want lose my twrp
Click to expand...
Click to collapse
I think you will need to use the tethered twrp
Dan_Jacques said:
I think you will need to use the tethered twrp
Click to expand...
Click to collapse
I just have the permanet recovery 3.0.0.0
This afternoon i try this rom !!
flashed this rom via TWRP over russian Bear & Borets Rom based on v184. Now cant boot the phone. only vibrate when press and hold the power button. Any help?
quadeur06 said:
This afternoon i try this rom !!
Click to expand...
Click to collapse
Yes do yiu have permanent twrp and after tell us if it work???
Thx
Yes i have permanent twrp
But..For flash this rom.. i must be in 6.0 beta and after flash this rom or it's not important if i am in 194?
vyaskd said:
flashed this rom via TWRP over russian Bear & Borets Rom based on v184. Now cant boot the phone. only vibrate when press and hold the power button. Any help?
Click to expand...
Click to collapse
To unbrick your phone, try this: [Guide] Un-brick both (Soft/Hard) bricked Zenfone 2 ze550ml/ze551ml
Apparently, the custom MM ROM has the same implications the official one. I was thinking to flash raw image like the @Russiamen upgrade guide. Maybe this way the system would be closest to stock and reduce the brick chances.
Dan_Jacques said:
To unbrick your phone, try this: [Guide] Un-brick both (Soft/Hard) bricked Zenfone 2 ze550ml/ze551ml
Apparently, the custom MM ROM has the same implications the official one. I was thinking to flash raw image like the @Russiamen upgrade guide. Maybe this way the system would be closest to stock and reduce the brick chances.
Click to expand...
Click to collapse
So no chance to test this rom since a .184 based rom???
moomoon03 said:
So no chance to test this rom since a .184 based rom?����
Click to expand...
Click to collapse
According the 4pda forum yes, there is a chance, and the Russiamen let you to do it this way, flashing RAW image and .184 zip ROM.
please help me to my post!! It's a very hard brick with this rom..I don't have bootloader...recovery nothing What is the solution ? I can't use adb because i don't have bootloader...

Convert to ZUI 2.0

Hi,
I saw the chinese threads regarding ZUI 2.0 and it was really confusing to understand what to download, what tool to use.
The existing threads are outdated or contain the rom.
I want the details to specifically install official ZUI 2.0 with download links and the QPST tool process. I am currently running CM 13.1 with TWRP Recovery.
Thank you.
SarthakSL said:
Hi,
I saw the chinese threads regarding ZUI 2.0 and it was really confusing to understand what to download, what tool to use.
The existing threads are outdated or contain the rom.
I want the details to specifically install official ZUI 2.0 with download links and the QPST tool process. I am currently running CM 13.1 with TWRP Recovery.
Thank you.
Click to expand...
Click to collapse
Read the thread again from page 1 to thread end. The process is there. You can also find twrp flashable rom.
https://yadi.sk/d/2lyZj4qitJzyg
This is the link which can be flashed with TWRP.
Does OTA work?
sai.suri1983 said:
Read the thread again from page 1 to thread end. The process is there. You can also find twrp flashable rom.
https://yadi.sk/d/2lyZj4qitJzyg
This is the link which can be flashed with TWRP.
Click to expand...
Click to collapse
If this is a pre rooted rom, I will just have to wait for the new pre rooted version to be released before flashing right?
Hello There!
Hey Bro,
I have tried this on my ZUK Z1 earlier. (ZUI 2.0.80 ST) Via TWRP it flashed properly works fine but when i'm trying to restore my CM13 Backup it always gave me error. And i have to format the data partition as well and install CM13 all over again always i have tried 2-3 times every time everything gone. Do you have any solution. I want to use ZUI 2.0 but i come back often to CM13 as well.
Thanks in advance!
sai.suri1983 said:
Read the thread again from page 1 to thread end. The process is there. You can also find twrp flashable rom.
https://yadi.sk/d/2lyZj4qitJzyg
This is the link which can be flashed with TWRP.
Click to expand...
Click to collapse
Yes you are right. OTA didn't work. I have already tried. OTA failed with no network error. Try to download 2.1.049 from Chinese forum and search how to root. Kingroot is not safe for rooting I think. I red some were. But didn't search more about it.
nil.d said:
Hey Bro,
I have tried this on my ZUK Z1 earlier. (ZUI 2.0.80 ST) Via TWRP it flashed properly works fine but when i'm trying to restore my CM13 Backup it always gave me error. And i have to format the data partition as well and install CM13 all over again always i have tried 2-3 times every time everything gone. Do you have any solution. I want to use ZUI 2.0 but i come back often to CM13 as well.
Thanks in advance!
Click to expand...
Click to collapse
@nil.d
ZUI and CM both are different. So I don't think that restoring data from CM to ZUI or from ZUI to CM will work. I flashed ZUI 2.0 and tried to restore apps with Titanium Backup. But it didn't work.
For me few issues with ZUI. Can't sync Google contacts, and Titanium Backup didn't work. I am using CM13 now.

VNS-L31 Can not rollback to marshmallow from nougat

Hi everyone, unfortunately I updated my p9 to nougat, using a zip found on a guide on the internet. But it's not a real complete beta, in this version a lot of emui's apps are missing such as, updater, calculator theme etc. So i tried to rollback to marshmallow, but I was not able to do it cause 3 buttons method don't work...There is any chance to fix this beta or to roll back to mm?
Thanks you all!
I have the same problem i flashed the rollback file given me always errors,
i tryd flashing the CM13 rom and now the phone doenst boot anymore ,
i have 2 partitions 1 Cust and 1 internal storage how can i fix this ?
my phone is stuck can someone help me&Us?
you have to flash the additional package so as to have all the apps, search in the forum you will find it
simo255 said:
you have to flash the additional package so as to have all the apps, search in the forum you will find it
Click to expand...
Click to collapse
Hi Simon, how I can flash it since revolution recovery it's not complete, there's any way to do it?
Caporex said:
Hi Simon, how I can flash it since revolution recovery it's not complete, there's any way to do it?
Click to expand...
Click to collapse
check here :
https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932
Ok, i followed the guide linked up. Everything is fine. There is a guide there on how to make data mount possible on revolution recovery for nougat. From there i flashed a workin nougat beta and addtional package. Thanks for answers everyone.

[UNOFFICIAL][8.0.0]OREO[LINEAGE-15] Not booting up

Well you all would have already know that-↓
Lineage 15 is released for our Z2 Plus and is also available for download
I tried to install that rom
But I was getting error 7 and then error 6 !!
But Somehow I managed to get rid from it installed the rom successfully as well as gapps but it's not booting up
:crying:
And yes I how did I manage to install it?
I was getting error 7 and error 6 then I opened the "update script" file into the rom and deleted all asserts coding and even then it did not work. So after trying for 2 to 3 times it installed easily but was not booting up.
Just want that if you guys can check it and somehow it boots up
Download link for Rom
https://yadi.sk/d/a-h59kHU3MThx6
Download link For Android 8.0 UNOFFICIAL GAPPS
http://www.lineageosroms.org/forums/topic/gapps-lineageos-15-android-oreo-roms/
For Source or Thread
http://www.lineageosroms.org/forums/topic/lineageos-15-zuk-z2-lenovo-z2-plus-android-oreo-8-0-rom/
I did not understand what you were doing
Nitink200 said:
Well you all would have already know that-↓
Lineage 15 is released for our Z2 Plus and is also available for download
[/SIZE]
I tried to install that rom
But I was getting error 7 and then error 6 !!
But Somehow I managed to get rid from it installed the rom successfully as well as gapps but it's not booting up
:crying:
Just want that if you guys can check it and somehow it boots up
You can find Source in LINEAGE ROMS WEBSITE
Click to expand...
Click to collapse
How did you finally manage to install the rom? Did you succeed? You did not write clearly. And where are the files located?
Wait for Oreo releases of the XDA Devs here instead of flashing untrusted stuff from the internet.
Z2 Plus is not officially supported by Lineage OS for now, so possibility of getting early builds is kind of unlikely, so please verify the source of the download once and refrain from flashing anything thats not released by our devs for now
I am new to XDA and That's why I was not permitted to add any external link to the rom (files) itself.
If I still can add external link so please tell me how to do it
And yes I how did I manage to install it?
I was getting error 7 and error 6 then I opened the "update script" file into the rom and deleted all asserts coding and then it did not work. So after trying for 2 to 3 times it installed easily but was not booting up.
Here's the link to download rom ↓↓
https://yadi.sk/d/a-h59kHU3MThx6
(This download link can also be located in thread itself)
And for thread in LINEAGE OS visit the link below↓↓
http://www.lineageosroms.org/forums/topic/lineageos-15-zuk-z2-lenovo-z2-plus-android-oreo-8-0-rom/
DISCLAIMER:
THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. EVEN IF IT BOOTS, IT MAY HAVE MANY MORE BUGS THAN YOU CAN IMAGINE. HAVE A BACKUP BEFORE FLASHING THIS AND TRY AT YOUR OWN RISK.
Click to expand...
Click to collapse
Do you even read at all?
I have read it all and That's why posted a question here so that you guys can somehow make it bootable because I am too excited and Oreo is ported without boot related bugs even for the older device like Moto x 1st Gen then why not for our device?
Nitink200 said:
I have read it all and That's why posted a question here so that you guys can somehow make it bootable because I am too excited and Oreo is ported without boot related bugs even for the older device like Moto x 1st Gen then why not for our device?
Click to expand...
Click to collapse
calm yourself and just gently show patience.
the devs here on XDA are working on Oreo, check the Offical AEX thread, Davide stated that the next build is going to be Oreo.
I wouldn't flash any ROM without having the ability to see the source code atleast. The site you found the ROM at does not look legitime to me at all.
Who knows what it will do/did to your device.
I mean if you dont care..
calm yourself and just gently show patience.
the devs here on XDA are working on Oreo, check the Offical AEX thread, Davide stated that the next build is going to be Oreo.
I wouldn't flash any ROM without having the ability to see the source code atleast. The site you found the ROM at does not look legitime to me at all.
Who knows what it will do/did to your device.
I mean if you dont care..
Click to expand...
Click to collapse
Thanks
calm yourself and just gently show patience.
the devs here on XDA are working on Oreo, check the Offical AEX thread, Davide stated that the next build is going to be Oreo.
I wouldn't flash any ROM without having the ability to see the source code atleast. The site you found the ROM at does not look legitime to me at all.
Who knows what it will do/did to your device.
I mean if you dont care..
Click to expand...
Click to collapse
Thanks

How to download odin software on android?

Brother I have no pc.
But I want to install stock firmwares.
So how to download Odin Software on Android?
You can't. Simple as that. You need a pc
Md Nafis Muhtadi said:
Brother I have no pc.
But I want to install stock firmwares.
So how to download Odin Software on Android?
Click to expand...
Click to collapse
Would you please just explain why you wanna flash stock and don't spam this request every day please
That's impossible at all
But tell me what you need on stock
Bro I think u are very angry with me.....sorry for my inappropriate messages......but the stock firmware was the real software of my phone......and that had no bugs......so I want to install the stock firmware of my J500H.But I also hadn't any pc........so i want to do it......plzz forgive me for inappropriate message
Md Nafis Muhtadi said:
Bro I think u are very angry with me.....sorry for my inappropriate messages......but the stock firmware was the real software of my phone......and that had no bugs......so I want to install the stock firmware of my J500H.But I also hadn't any pc........so i want to do it......plzz forgive me for inappropriate message
Click to expand...
Click to collapse
If you installed twrp then flash sep8.5
I have same device as you have and it's bug less rom
It's much better than stock and it is noghat too!
Here are the link of threads that is preferred and it's the only way that can use your phone as you want
https://forum.xda-developers.com/ga...p-8-5-lite-galaxy-j2-2018-rom-t3821600/page16
https://forum.xda-developers.com/ga...om-sep-8-5-galaxy-a8-2018-rom-t3796971/page63
You can choose between these two rom
If you Don't care about theme and some ability like this install sep8.5 lite(first link)
And if you want some stuff like edge panel floating messages and themes and these things install Secend one(sep8.5)
Both of them are bug less and completely stable and fast
Btw update your twrp to latest official
Bro thanks for cooperating me.......
Bro I can't install twrp recovery with supported aroma.Please tell me how to install twrp 3.2.1 with supported aroma without PC!
Md Nafis Muhtadi said:
Bro I can't install twrp recovery with supported aroma.Please tell me how to install twrp 3.2.1 with supported aroma without PC!
Click to expand...
Click to collapse
You have installed twrp??
If yes download that img file then at install section select install img then look for your file and click on it then you will see boot and recovery option that you should select revovery then slide to flash
Btw download latest one from twrp.me
Bro done....i have installed twrp with supported aroma 3.2.1 but when I install the spaceos on my J500H it fails.
I will give u screenshots.Please solve it.
Md Nafis Muhtadi said:
Bro done....i have installed twrp with supported aroma 3.2.1 but when I install the spaceos on my J500H it fails.
I will give u screenshots.Please solve it.
Click to expand...
Click to collapse
I didn't prefer space os lol
How ever it's great rom
But you know some roms creat for some special twrp
Just prototype solved that bug on his rom(sep8.5)
Now for this Just see which twrp is preferred on its threat
It should be zonik's twrp ikd
But just check which is recommended by dev
OK....bro I will first check sep 8.5 then twrp
Bro I have downloaded Sep 8.5 but this time also twrp error........I have given the screenshots below......and i have also attached the twrp version of mine.........and i have downloaded 3 twrps.....these all got error when i wanted to install.........please give me the link of correct twrp of j5 with aroma supported of the latest version........
Md Nafis Muhtadi said:
Bro I have downloaded Sep 8.5 but this time also twrp error........I have given the screenshots below......and i have also attached the twrp version of mine.........and i have downloaded 3 twrps.....these all got error when i wanted to install.........please give me the link of correct twrp of j5 with aroma supported of the latest version........
Click to expand...
Click to collapse
Would you please pm me at telegram
My id is amiriza
Bro I can't send u message.....I gave the screenshots....... Plzz tell me your telegram number....

Categories

Resources