I need I337UCUAMF3 official firmware download - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

Can anyone direct me to the I337UCUAMF3 official firmware?

jsull35 said:
Can anyone direct me to the I337UCUAMF3 official firmware?
Click to expand...
Click to collapse
None available, but I suggest you use the search function and do some reading because this has been mentioned dozens of times already. The best you can do at this point is take the phone to a BestBuys with a Sumsung Kiosk and see if they will reflash it. You need to search to find out more information about it.

scott14719 said:
None available, but I suggest you use the search function and do some reading because this has been mentioned dozens of times already. The best you can do at this point is take the phone to a BestBuys with a Sumsung Kiosk and see if they will reflash it. You need to search to find out more information about it.
Click to expand...
Click to collapse
Yea, this is the second time this week my phone has bricked for no reason. At&t warranty center ran the samsung tool on it last time and fixed it.

jsull35 said:
Yea, this is the second time this week my phone has bricked for no reason. At&t warranty center ran the samsung tool on it last time and fixed it.
Click to expand...
Click to collapse
Sounds like it needs to be replaced (warranty or insurance), but I would try for warranty first. If it bricked for no reason at all, I assume you are not rooted and have nothing custom on the phone? Because if you do, it could prevent a warranty claim. Samsung can and will send you a bill if they find anything has been tampered with. Good luck.

You can check here...
Mind you however, that is ONLY for devices running pre-MF3 bootloaders. If you attempt to flash it as a stock recovery on a MF3 device your end up with a brick. If your on MF3 and have a brick currently, there isn't a way to go back outside of sending the phone back to Samsung or going to Best Buy's Samsung Experience Center.

jsull35 said:
Can anyone direct me to the I337UCUAMF3 official firmware?
Click to expand...
Click to collapse
https://mega.co.nz/#!WEEzSA7Z!aB46731_AwM7P83eMdDlmFYd1hUZfFBcQAZjc1X7wAE Here ya go Hope it works. Thx to @Shockndrop for the files.

Get the new EMJ6. Even beta is fine.

BaSingSe said:
Get the new EMJ6. Even beta is fine.
Click to expand...
Click to collapse
Why? You're just locked down that much tighter. No root, no custom roms

jd1639 said:
Why? You're just locked down that much tighter. No root, no custom roms
Click to expand...
Click to collapse
cant you use safestrap for custom roms?

nabears101 said:
cant you use safestrap for custom roms?
Click to expand...
Click to collapse
not on mj6

nabears101 said:
https://mega.co.nz/#!WEEzSA7Z!aB46731_AwM7P83eMdDlmFYd1hUZfFBcQAZjc1X7wAE Here ya go Hope it works. Thx to @Shockndrop for the files.
Click to expand...
Click to collapse
This is by far your best option, use ODIN and flash these files to return to a stock MF3. Updating to anything higher then MF3 is generally ill-advised. At least for the moment...

nabears101 said:
cant you use safestrap for custom roms?
Click to expand...
Click to collapse
Have you tested or seen anyone else report that the current Safestrap works with MJ6 or you can even gain root access with MJ6?
Not being rude, but please don't offer advice if you are unsure of the outcome (this means more than one person has confirmed working or you have tested it yourself). I personally don't think it hurts to make a suggestion but let the person know it hasn't been tested or you are unsure of the outcome.
Had the OP taken your advice before you were corrected, they would have been upgraded to MJ6 with no option for running a custom ROM or getting root access (hopefully this won't be the case for long).

NighthawkXL said:
This is by far your best option, use ODIN and flash these files to return to a stock MF3. Updating to anything higher then MF3 is generally ill-advised. At least for the moment...
Click to expand...
Click to collapse
The rar file in the link above comes with 5 files.
BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5
MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5
PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5
SS_DL.dll
Odin (v3.07) has 4 slots for different files:
Bootloader
PDA
Phone
CSC
My question is which files go in which slot for redownloading mf3 to a soft bricked mf3 s4?

Zeltex said:
My question is which files go in which slot for redownloading mf3 to a soft bricked mf3 s4?
Click to expand...
Click to collapse
Here is a link showing what this person did. Do not use the SS_DL.dll
http://forum.xda-developers.com/showpost.php?p=46943206&postcount=30

~wolverine~ said:
Here is a link showing what this person did. Do not use the SS_DL.dll
http://forum.xda-developers.com/showpost.php?p=46943206&postcount=30
Click to expand...
Click to collapse
The CSC file seems to be giving me problems. I've tried different versions of ODIN (v3.04,3.07,3.09,1.85) and they all have the same problem.

Zeltex said:
The CSC file seems to be giving me problems. I've tried different versions of ODIN (v3.04,3.07,3.09,1.85) and they all have the same problem.
Click to expand...
Click to collapse
I'm on windows 8.1 pro 64bit & used Odin v1.85. worked perfectly.

Zeltex said:
The CSC file seems to be giving me problems. I've tried different versions of ODIN (v3.04,3.07,3.09,1.85) and they all have the same problem.
Click to expand...
Click to collapse
Probably a bad download

jd1639 said:
Probably a bad download
Click to expand...
Click to collapse
I redownloaded the files again and Odin is still crashing whenever I press start.

Zeltex said:
I redownloaded the files again and Odin is still crashing whenever I press start.
Click to expand...
Click to collapse
I saw your other post with the Odin print out. It looks to me like it's still a bad download, the md5 is not checking.
Edit, what are you using to extract the md5 files from the zip? Use 7-zip.

jd1639 said:
I saw your other post with the Odin print out. It looks to me like it's still a bad download, the md5 is not checking.
Edit, what are you using to extract the md5 files from the zip? Use 7-zip.
Click to expand...
Click to collapse
That might be the case I've been using winrar to extract the files. Not sure if it should make a difference but will try

Related

Cannot flash stock firmware??

Hey all ive been trying to flash my orginal firmware for my galaxy s4 at&t i337. Ive been using odin 3.07 but I keep having a fail to complete error. It boots up fine and I attempted to root it but it seems like it works but I run root checker and it tells me that it has rooted incorrectly. A lot of other people have been saying that samsung block this exploit in 4.2.2 and im basically screwed till the new update comes out. Ive tried everything, help would be appreciated
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
joearvelo1987 said:
Hey all ive been trying to flash my orginal firmware for my galaxy s4 at&t i337. Ive been using odin 3.07 but I keep having a fail to complete error. It boots up fine and I attempted to root it but it seems like it works but I run root checker and it tells me that it has rooted incorrectly. A lot of other people have been saying that samsung block this exploit in 4.2.2 and im basically screwed till the new update comes out. Ive tried everything, help would be appreciated
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I think that's the wrong odin i think it's 1.85 or something like that you need
jaythenut said:
I think that's the wrong odin i think it's 1.85 or something like that you need
Click to expand...
Click to collapse
3.07 works too since it has compatibility with all devices that work with 1.85 and dev recommends to use v3.07...
kingzain900 said:
3.07 works too since it has compatibility with all devices that work with 1.85 and dev recommends to use v3.07...
Click to expand...
Click to collapse
I've tried both and get nothing but a fail here's this mornings attempt on Odin v1.85, if I got the wrong firmware please let me know, I don't think I do though...
joearvelo1987 said:
I've tried both and get nothing but a fail here's this mornings attempt on Odin v1.85, if I got the wrong firmware please let me know, I don't think I do though...
Click to expand...
Click to collapse
You're not supposed to decompress the tar file.
You need to flash the xxxxxxx.tar
kingzain900 said:
You're not supposed to decompress the tar file.
You need to flash the xxxxxxx.tar
Click to expand...
Click to collapse
What do you mean by decompress? Unzipp?
joearvelo1987 said:
What do you mean by decompress? Unzipp?
Click to expand...
Click to collapse
Exactly
sajlence said:
Exactly
Click to expand...
Click to collapse
No good, different fail error this time. Fail(auth) ??
joearvelo1987 said:
No good, different fail error this time. Fail(auth) ??
Click to expand...
Click to collapse
Were you on mf3 firmware? If you were Odin is not going to work

Secure Check Fail when trying to restore with Odin

Alright, so I've been doing rooting things for a long time...and never have I had this many problems. I posted something here earlier about rooting my S4, installing ROMs and having it hang on the Samsung Galaxy S4 Screen. So I figured I would try booting with Odin and re-installing a stock image. No luck. I keep getting this show up on my Galaxy S4 when I click start -- "secure check failed" and Odin shows a fail.
I don't even know where to go from here because I'm looking at an expensive paperweight at this point. Has anyone ever seen this before or even know where I can start. Any help would really be appreciated...at this point I just feel defeated.
-Stalker
Are you using the correct firmware? You werent on MF3 were you?
Sent from my SAMSUNG-SGH-I467 using Tapatalk 4
agent929 said:
Are you using the correct firmware? You werent on MF3 were you?
Sent from my SAMSUNG-SGH-I467 using Tapatalk 4
Click to expand...
Click to collapse
I believe I was using the correct firmware. I followed the instructions in the Q&A thread. I was NOT on MF3.
Hoping to get this figured out
a.stalker22 said:
I believe I was using the correct firmware. I followed the instructions in the Q&A thread. I was NOT on MF3.
Hoping to get this figured out
Click to expand...
Click to collapse
I always get firmware from sammobile.com. Download the firmware ending in mdl. It'll be a zip file. Use 7-zip to extract the .tar.md5 file from it and use that in Odin.
jd1639 said:
I always get firmware from sammobile.com. Download the firmware ending in mdl. It'll be a zip file. Use 7-zip to extract the .tar.md5 file from it and use that in Odin.
Click to expand...
Click to collapse
I'll download the firmware there and see if that solves my issue. Is there any way this could be related to the kernel? If I restore this firmware I will lose my root, correct?
a.stalker22 said:
I'll download the firmware there and see if that solves my issue. Is there any way this could be related to the kernel? If I restore this firmware I will lose my root, correct?
Click to expand...
Click to collapse
You will lose root. Odin should put everything back on like it was new. You do have to register on sammobile to download the firmware, but it's free.
jd1639 said:
You will lose root. Odin should put everything back on like it was new. You do have to register on sammobile to download the firmware, but it's free.
Click to expand...
Click to collapse
Yeah I saw that. I'm registering now and hopefully this will work. If I run into any more problems I'll let you know.
jd1639 said:
You will lose root. Odin should put everything back on like it was new. You do have to register on sammobile to download the firmware, but it's free.
Click to expand...
Click to collapse
Hey man..that was it! I really appreciate all of the help...you have no idea! :laugh:
a.stalker22 said:
Hey man..that was it! I really appreciate all of the help...you have no idea! :laugh:
Click to expand...
Click to collapse
Great to hear!

Settings file is deleted?

Hello! I rooted my S4 today and installed the CWM recovery and flashed my new rom which is the Foxhound 2.0 http://forum.xda-developers.com/showthread.php?t=2303239. I have had my older device rooted and i have flashed couple roms with it (huawei ideos x5) and i didn't want to lose all my files and apps from my S4 while flashing this rom, so i didn't do the factory reset thing. I wiped my cache and dalvik cache and then i flashed my rom. As soon as i got it working i was hyped and so on but i noticed that the Settings app was missing. I looked via root explorer and it wasn't in the folder /system/app/. I looked from the magical internet and didn't find anything. Nothing at all. I tried installing some setting.apk's but none of them worked. I downloaded the stock android 4.2.2 rom and copied the settings.apk from there but no, it didn't do anything. I tried also installing those setting apk's but it says 'app not installed'. I had my backup of the android 4.2.2 in my phone but when i tried to restore it to my phone, it said something about m5 sum thing or what it was i don't remember. If you have any clue, please help. I'm lost and i need guidance.
Sorry if there is some bad English, i'm from Finland.
In cwm restore settings, uncheck the check md5 sum. It should then let you restore the nandroid
I messed it up
jd1639 said:
In cwm restore settings, uncheck the check md5 sum. It should then let you restore the nandroid
Click to expand...
Click to collapse
As stupid as i was, i deleted the backup because it took all space from my phone. I couldn't do anything so i had to delete it. (it took 4.5 gb of space)
ippeman said:
As stupid as i was, i deleted the backup because it took all space from my phone. I couldn't do anything so i had to delete it. (it took 4.5 gb of space)
Click to expand...
Click to collapse
Well you could always Odin back to stock.
jd1639 said:
Well you could always Odin back to stock.
Click to expand...
Click to collapse
Can you tell me how? I don't have too much experience with Odin
ippeman said:
Can you tell me how? I don't have too much experience with Odin
Click to expand...
Click to collapse
Download Odin ver 3.07. Download firmware for your device from sammobile.com. It'll be a zip file. Use 7-zip to extract the .tar.md5 file from it. Use that file in Odin, PDA slot. Only have auto-reboot checked in odin.
jd1639 said:
Download Odin ver 3.07. Download firmware for your device from sammobile.com. It'll be a zip file. Use 7-zip to extract the .tar.md5 file from it. Use that file in Odin, PDA slot. Only have auto-reboot checked in odin.
Click to expand...
Click to collapse
Which firmware i take? I live in finland and i see no finland firmware there
ippeman said:
Which firmware i take? I live in finland and i see no finland firmware there
Click to expand...
Click to collapse
Do you know what firmware you are currently on? And what specific device do you have, i9500, i9505, etc?
jd1639 said:
Do you know what firmware you are currently on?
Click to expand...
Click to collapse
Naa, and i tried the *#1234# thing that they said in the sammobile site but that didn't work for me
ippeman said:
Naa, and i tried the *#1234# thing that they said in the sammobile site but that didn't work for me
Click to expand...
Click to collapse
Well what device do you have and what's your carrier
jd1639 said:
Well what device do you have and what's your carrier
Click to expand...
Click to collapse
Carrier is Saunalahti and device Samsung Galaxy S4 GT-I9505 and that's it, what else should i know
ippeman said:
Carrier is Saunalahti and device Samsung Galaxy S4 GT-I9505 and that's it, what else should i know
Click to expand...
Click to collapse
It looks like firmware ending in mga is what you need. Sammobile doesn't have firmware for Finland so I'd look for another counties which has the last three characters as mga.
jd1639 said:
Well what device do you have and what's your carrier
Click to expand...
Click to collapse
Should i use the KIES thing? http://www.samsung.com/fi/info/update.html i don't know if you could translate it to english or something?
ippeman said:
Should i use the KIES thing? http://www.samsung.com/fi/info/update.html i don't know if you could translate it to english or something?
Click to expand...
Click to collapse
I can't link you but Google "4.2.2 Finland firmware xda" There's a thread that has firmware for many counties with Finland being one of them
jd1639 said:
I can't link you but Google "4.2.2 Finland firmware xda" There's a thread that has firmware for many counties with Finland being one of them
Click to expand...
Click to collapse
I googled and found only sony xperia stuff what do you think about the kies thing?
Sent from my GT-I9505 using xda app-developers app
Give keys a try but I don't have much luck with it. I'll see if I can find a way you link you to the xda site
Edit, it was easier than I thought http://forum.xda-developers.com/showthread.php?p=40895753
jd1639 said:
Give keys a try but I don't have much luck with it. I'll see if I can find a way you link you to the xda site
Edit, it was easier than I thought http://forum.xda-developers.com/showthread.php?p=40895753
Click to expand...
Click to collapse
I see Finland there!! Wohoo! Thank you, when i get back to my computer tomorrow, i'll try the odin. Can i backup my apps and stuff somewere before i start doing this?
Sent from my GT-I9505 using xda app-developers app
ippeman said:
I see Finland there!! Wohoo! Thank you, when i get back to my computer tomorrow, i'll try the odin. Can i backup my apps and stuff somewere before i start doing this?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
You're not going to be able to back up your apps if you can't boot into your phone. They will be gone when you flash the stock firmware.
jd1639 said:
You're not going to be able to back up your apps if you can't boot into your phone. They will be gone when you flash the stock firmware.
Click to expand...
Click to collapse
Hi again! The odin thing and that firmware stuff did something bad to my phone so i tried the kies and got everything working but now i don't have my rom. Do you think it's wise to go back to the foxhound? it ****ed up my settings and stuff Can you recommend some rom for me? And THANK YOU!! for your help
ippeman said:
Hi again! The odin thing and that firmware stuff did something bad to my phone so i got everything working but now i don't have my rom. Do you think it's wise to go back to the foxhound? it ****ed up my settings and stuff Can you recommend some rom for me? And THANK YOU!! for your help
Click to expand...
Click to collapse
You're going to have to 're-root and put a custom recovery back on. Have you done that yet?

[Q] Help rooting NK2

Anybody rooted NK2? My Galaxy S4 Developers Edition phone was stolen on a recent airplane flight (fell asleep and when I deplaned the phone was missing) . Assurion couldn't replace the phone so they sent me a new S5, but it came with NK2 installed. Waiting for a Nexus 6 to purchase...
rmanaka said:
Anybody rooted NK2? My Galaxy S4 Developers Edition phone was stolen on a recent airplane flight (fell asleep and when I deplaned the phone was missing) . Assurion couldn't replace the phone so they sent me a new S5, but it came with NK2 installed. Waiting for a Nexus 6 to purchase...
Click to expand...
Click to collapse
Its been out about a day I believe... Hopefully we'll still be able to root this one using the same methods from before. You can try if you want.
http://forum.xda-developers.com/showthread.php?t=2879348
BigBot96 said:
Its been out about a day I believe... Hopefully we'll still be able to root this one using the same methods from before. You can try if you want.
http://forum.xda-developers.com/showthread.php?t=2879348
Click to expand...
Click to collapse
Thanks, saw that, but I think I would need the NK2 kernel as the last step?
rmanaka said:
Thanks, saw that, but I think I would need the NK2 kernel as the last step?
Click to expand...
Click to collapse
Or any other kernel, unless you really want NK2 for some reason.
rmanaka said:
Thanks, saw that, but I think I would need the NK2 kernel as the last step?
Click to expand...
Click to collapse
If the bootloader has not been incremented, we'll be able to regain root on NK2 once there's an ODIN flashable NK2 kernel. So basically, I don't believe it's possible just yet.
rmanaka said:
Anybody rooted NK2? My Galaxy S4 Developers Edition phone was stolen on a recent airplane flight (fell asleep and when I deplaned the phone was missing) . Assurion couldn't replace the phone so they sent me a new S5, but it came with NK2 installed. Waiting for a Nexus 6 to purchase...
Click to expand...
Click to collapse
The new kernel is here if you want to try.
rmanaka said:
Anybody rooted NK2? My Galaxy S4 Developers Edition phone was stolen on a recent airplane flight (fell asleep and when I deplaned the phone was missing) . Assurion couldn't replace the phone so they sent me a new S5, but it came with NK2 installed. Waiting for a Nexus 6 to purchase...
Click to expand...
Click to collapse
Garret_top said:
I just used it and it works
Thanks again I followed your guide my first time around. You da man
Click to expand...
Click to collapse
open1your1eyes0 said:
Here you go guys: https://www.androidfilehost.com/?fid=95857557620393842
Just follow my previous guide from before (linked below) and at step #6 just use the NK2 kernel (linked above) instead.
http://forum.xda-developers.com/showpost.php?p=55347753&postcount=19
Let me know if it works.
Click to expand...
Click to collapse
^^^^^^^
Towelroot blocked everywhere...
kprice8 said:
^^^^^^^
Click to expand...
Click to collapse
Everytime I try to download towelroot (both on my computer and on my GS5), the .apk is blocked as a virus package.
The S5 really doesn't like the website for towelroot, and google searches for the apk also get blocked by Symantec. Has this apk been compromised or has it contained a Trojan all along?
Any thoughts or suggestions?
rmanaka said:
Everytime I try to download towelroot (both on my computer and on my GS5), the .apk is blocked as a virus package.
Any thoughts or suggestions?
Click to expand...
Click to collapse
Download it to your computer, tether to computer, and place it on the SD card.
Disable the anti-virus on your PC first....
kprice8 said:
Download it to your computer, tether to computer, and place it on the SD card.
Disable the anti-virus on your PC first....
Click to expand...
Click to collapse
Wow, even Dropbox kills the file...
After I disabled my antivirus (Symantec) and tried to restore the file, I get security errors ALL OVER THE PLACE on my desktop computer.
*** UPDATE ***
Well, I was able to get tr.apk onto my SDcard and then successfully obtain root!
I don't know what the issue is with towelroot, but my clock on my desktop was reset and the internet time server could not correctly rsynch the time; I had to manually reset the time.
It's pretty scary when this happens...I don't know if it is a false positive Trojan detection or what, but I sure hope somebody more knowledgeable has reverse engineered the tr.apk and validated that it is safe!
OH Well, thanks everybody. Keeping fingers crossed!!!
I Can't wait to get a fully unlocked Nexus 6 (and hopefully prevent VZ from locking it like they try with the Developers Edition devices)!!! Maybe its time to switch carriers.
Misterxtc said:
The new kernel is here if you want to try.
Click to expand...
Click to collapse
Took NK2 update this morning. Attempted to go back to NCG firware, in order to use "towelroot" to reroot. Using Odin. It failed on 3 attemps. Unless I did something wrong.
dshu said:
Took NK2 update this morning. Attempted to go back to NCG firware, in order to use "towelroot" to reroot. Using Odin. It failed on 3 attemps. Unless I did something wrong.
Click to expand...
Click to collapse
Try the files and kernels I have here. I know they work.
Misterxtc said:
Try the files and kernels I have here. I know they work.
Click to expand...
Click to collapse
Thank you, tried your files. still cannot not go back to a previous firmware NCG, just says it fails.
dshu said:
Thank you, tried your files. still cannot not go back to a previous firmware NCG, just says it fails.
Click to expand...
Click to collapse
One more shot if you haven't tried already. Flash the full NCG tar from here to see if you can at least get root back and then flash the NI2 firmware. If that works install a NI2 stock or custom ROM.
Misterxtc said:
One more shot if you haven't tried already. Flash the full NCG tar from here to see if you can at least get root back and then flash the NI2 firmware. If that works install a NI2 stock or custom ROM.
Click to expand...
Click to collapse
Also make sure that you have checked the MD5 hash of your downloads. I have had failed ODINs from a corrupt download.
Misterxtc said:
One more shot if you haven't tried already. Flash the full NCG tar from here to see if you can at least get root back and then flash the NI2 firmware. If that works install a NI2 stock or custom ROM.
Click to expand...
Click to collapse
Just tried it, no go....I guess NK2 has closed off our root procedure.. Thank you for all the help.
dshu said:
Just tried it, no go....I guess NK2 has closed off our root procedure.. Thank you for all the help.
Click to expand...
Click to collapse
Bummer. I might have got it wrong but there are a few saying it can be done. According to this post you need to flash NE9 first. Flash the NK2 kernel at the end instead of NI2 if you want NK2. Hopefully that works.
It worked for me...
dshu said:
Just tried it, no go....I guess NK2 has closed off our root procedure.. Thank you for all the help.
Click to expand...
Click to collapse
Not true...I was able to root a brand new GS5 NK2 using the described procedure (with hesitation from downloading Towelroot). If ODIN is failing it means something is wrong with your flashing procedure. Try another computer/cable and make sure that whatever you are using has the Samsung USB drivers installed.
For reference I used ODIN v. 3.0.7 instead of the latest version.
Misterxtc said:
Bummer. I might have got it wrong but there are a few saying it can be done. According to this post you need to flash NE9 first. Flash the NK2 kernel at the end instead of NI2 if you want NK2. Hopefully that works.
Click to expand...
Click to collapse
Oh, ok I will try to flash NE9 instead of NCG...Thank you
Misterxtc said:
Try the files and kernels I have here. I know they work.
Click to expand...
Click to collapse
Discovered why I could not Odin the firmware, that people tried to assist me. Well wish I could come up with a complicated reason why it was not working, but my own fault,
I never put phone in "download" mode. That's why it was failing. It worked now. Thanks all that helped me..

SM-G900W8 Factory firmware

I have a SM-G900W8 boot-looping device, none of HOME firmwares could have helped me to amend the phone.
The device is still bootlooping, and I was told there was a FIRMWARE firmware which consists of 4 files, it's usually being called the service firmware as well.
This firmware could help me to stop the bootlooping process.
I've been searching this kind of firmware here, then i've checked out 3 different firmwares at fw.updato.com, but none of them are service.
Could anyone please tell me if is it possible to find the certain service firmware?
Service firmware will wipe data and cache partitions in your phone, this is the difference.
You can try to do it by yourself from recovery.
Wiping cache partition only should help if it's a software problem.
Or try to use samfirm tool to download the latest service firmware for your phone.
You'll have to enter your phone's model, CSC and tick "Binary nature".
Samfirm tool points me to fw.updato.com, which has been used already. I downloaded 3 firmwares and none of them suites me.
p00hzone said:
Samfirm tool points me to fw.updato.com, which has been used already. I downloaded 3 firmwares and none of them suites me.
Click to expand...
Click to collapse
What CSC do you need?
bbsc said:
What CSC do you need?
Click to expand...
Click to collapse
I wish i knew it. I do not know where the phone came from, i just know the model code. Neither the firmware it was bought with, nor what exactly happened.
Only odin mode is bootable. Nothing else is.
p00hzone said:
I wish i knew it. I do not know where the phone came from, i just know the model code. Neither the firmware it was bought with, nor what exactly happened.
Only odin mode is bootable. Nothing else is.
Click to expand...
Click to collapse
Ok, what CSC do you want? (What provider do you use?)
bbsc said:
Ok, what CSC do you want? (What provider do you use?)
Click to expand...
Click to collapse
This is a canadian model, but i am in Russia. So any provider would suite me, because Im gonna flash TWRP after I'll be able to boot to recovery.
p00hzone said:
This is a canadian model, but i am in Russia. So any provider would suite me, because Im gonna flash TWRP after I'll be able to boot to recovery.
Click to expand...
Click to collapse
Ok, I'll try to upload something to MEGA.
Here you are: link deleted.
The link will be there a day or two.
bbsc said:
Here you are: https://mega.nz/#!6gMTDQhK!sAeDxnJPaDqubwlNCxMmamUmuhmVlaQt5WDJnM8z6rE
Click to expand...
Click to collapse
Thank you VERY much.
p00hzone said:
I have a SM-G900W8 boot-looping device, none of HOME firmwares could have helped me to amend the phone...
Click to expand...
Click to collapse
I don't have this variant but, the following links are great places to grab the G900W8 Stock Firmware from.
https://www.sammobile.com/firmwares/galaxy-s5/sm-g900w8/
https://updato.com/firmware-archive-select-model?exact=1&q=sm-g900w8
http://samsung-updates.com/device/?id=sm-g900w8
The following link is from the Androidfilehost site where an individual had uploaded one of them as well.
https://androidfilehost.com/?fid=673791459329051147
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
p00hzone said:
Thank you VERY much.
Click to expand...
Click to collapse
You're welcome.
Any luck with flashing?
Do you still need the link?
bbsc said:
You're welcome.
Any luck with flashing?
Do you still need the link?
Click to expand...
Click to collapse
I've already downloaded the firmware, dont need it anymore. Thank you.
I flashed the phone, but unfortunately, there was no any luck.
The phone still keeps trying to boot into recovery, and reboots.
Have no idea how to make it work again.
Anyways, thank you for you support!
p00hzone said:
The phone still keeps trying to boot into recovery, and reboots.
Have no idea how to make it work again.
Click to expand...
Click to collapse
Hmm, suspected something like that... I'm afraid, this is a HW problem.
Defecitve emmc chip is an often problem for S5.
In this case your best bet is to swap the motherboard.
bbsc said:
In this case your best bet is to swap the motherboard.
Click to expand...
Click to collapse
I believe the best options for me is to swap the phone =)

Categories

Resources