Related
hi
i have a 32gb SEA model.
is there a way to transform it to a generic EUR version and received updates?
i have already flashed german eur v10g-EUR-XX
but on software info it shows "v10g-SEA-XX" and are included branded StarHub Apps and LTE is not working.
tried to flash official 32gb italian rom, but shows as "v10g-GLOBAL-SI", lte is appering but is unselectable,
as it returns to WCDMA/GMS and still there are branded apps...
is there any solution?
i need to have an EUR firmware....
DYNAMIC+ said:
hi
i have a 32gb SEA model.
is there a way to transform it to a generic EUR version and received updates?
i have already flashed german eur v10g-EUR-XX
but on software info it shows "v10g-SEA-XX" and are included branded StarHub Apps and LTE is not working.
tried to flash official 32gb italian rom, but shows as "v10g-GLOBAL-SI", lte is appering but is unselectable,
as it returns to WCDMA/GMS and still there are branded apps...
is there any solution?
i need to have an EUR firmware....
Click to expand...
Click to collapse
The updates are done by IMEI so no matter what your phone will always be SEA and sorry you cannot change SEA to EU as far as I am aware.
daleski75 said:
The updates are done by IMEI so no matter what your phone will always be SEA and sorry you cannot change SEA to EU as far as I am aware.
Click to expand...
Click to collapse
oh ****...
so no way to install EUR rom?
DYNAMIC+ said:
oh ****...
so no way to install EUR rom?
Click to expand...
Click to collapse
You can install any D855 rom but you just won't get OTA updates for anything but a SEA version.
daleski75 said:
You can install any D855 rom but you just won't get OTA updates for anything but a SEA version.
Click to expand...
Click to collapse
ok but why if i flash v10g-EUR-XX from firmware threads
i get on software info v10g-SEA-XX (and not v10g-EUR-XX) ?
DYNAMIC+ said:
ok but why if i flash v10g-EUR-XX from firmware threads
i get on software info v10g-SEA-XX (and not v10g-EUR-XX) ?
Click to expand...
Click to collapse
The suffix/model does not change when you flash a kdz.
daleski75 said:
The suffix/model does not change when you flash a kdz.
Click to expand...
Click to collapse
ok, so if i understood, there is no solution?
i'm going to re-send back phone as it have to be a european model, but seller sent me a sea version
DYNAMIC+ said:
ok, so if i understood, there is no solution?
i'm going to re-send back phone as it have to be a european model, but seller sent me a sea version
Click to expand...
Click to collapse
I assume this problem is true for all SEA devices used in Europe, that is, non LTE connectivity unless you use temporary activation with code 3845#*855#
DYNAMIC+ said:
ok, so if i understood, there is no solution?
i'm going to re-send back phone as it have to be a european model, but seller sent me a sea version
Click to expand...
Click to collapse
I already have the same issue with no solution. I have a Eur and i am already in Saudi Arabia. whenever i flash AME kdz it reverts back to Eur. never get LTE option in networks and i hate the service menu. so the only solution i found is installing the new i kdz.
saud__19 said:
I already have the same issue with no solution. I have a Eur and i am already in Saudi Arabia. whenever i flash AME kdz it reverts back to Eur. never get LTE option in networks and i hate the service menu. so the only solution i found is installing the new i kdz.
Click to expand...
Click to collapse
I do own SEA 32GB phone but it is general SEA unbranded so no Star-Hub apps and it does have LTE / 4G which is auto activated. Try to flash this rom and it might solve the issue as it is still SEA rom.
shmuelw said:
I do own SEA 32GB phone but it is general SEA unbranded so no Star-Hub apps and it does have LTE / 4G which is auto activated. Try to flash this rom and it might solve the issue as it is still SEA rom.
Click to expand...
Click to collapse
Hello, which ROM should i flash? I have an AME phone with no LTE in the options, i want to use in Russia...we have LTE here.
shmuelw said:
I do own SEA 32GB phone but it is general SEA unbranded so no Star-Hub apps and it does have LTE / 4G which is auto activated. Try to flash this rom and it might solve the issue as it is still SEA rom.
Click to expand...
Click to collapse
Yes my device is unbranded Eur version. but still no luck to instal AME kdz. as what i mention before the only solution is the leaked i kdz.
---------- Post added at 08:40 AM ---------- Previous post was at 08:28 AM ----------
zapford said:
Hello, which ROM should i flash? I have an AME phone with no LTE in the options, i want to use in Russia...we have LTE here.
Click to expand...
Click to collapse
try the leaked i kdz.
shmuelw said:
I do own SEA 32GB phone but it is general SEA unbranded so no Star-Hub apps and it does have LTE / 4G which is auto activated. Try to flash this rom and it might solve the issue as it is still SEA rom.
Click to expand...
Click to collapse
already tried to flash
V10G-GLOBAL-SI (and also "i" version, leaked one...) but no lte... and all apps for singapore market (starhub, m1, ...)
I recently did this for a friend. He had an SEA 10e firmware on his G3 and I flashed the 10g italian firmware to his phone without any problems. He wasn't getting 4G on Vodafone UK earlier, but after flashing the new firmware, he gets it. I've seen a couple of people doing this as well. I just followed the guides posted here to flash the firmwares.
maneck35 said:
I recently did this for a friend. He had an SEA 10e firmware on his G3 and I flashed the 10g italian firmware to his phone without any problems. He wasn't getting 4G on Vodafone UK earlier, but after flashing the new firmware, he gets it. I've seen a couple of people doing this as well. I just followed the guides posted here to flash the firmwares.
Click to expand...
Click to collapse
Any one know why these D855 devices from different regions cannot be used in other regions for LTE? I wonder if this is like the region lock on the Note 3 to allow Samsung to restrict warranty cover?
maneck35 said:
I recently did this for a friend. He had an SEA 10e firmware on his G3 and I flashed the 10g italian firmware to his phone without any problems. He wasn't getting 4G on Vodafone UK earlier, but after flashing the new firmware, he gets it. I've seen a couple of people doing this as well. I just followed the guides posted here to flash the firmwares.
Click to expand...
Click to collapse
no way to enable LTE...
now i have V10i-GLOBAL-SI
jah said:
Any one know why these D855 devices from different regions cannot be used in other regions for LTE? I wonder if this is like the region lock on the Note 3 to allow Samsung to restrict warranty cover?
Click to expand...
Click to collapse
it seems to be locked by "ltesettings.apk" background app...
i'm not sure, but every g3, could be used with every lte band...
any other idea?
(i cannot root device)
if i cant resolve i have to change device...
I'm not sure why you can't enable LTE. Maybe it's carrier dependent or maybe not. If you're not happy I'd suggest switching your device.
maneck35 said:
I'm not sure why you can't enable LTE. Maybe it's carrier dependent or maybe not. If you're not happy I'd suggest switching your device.
Click to expand...
Click to collapse
with regrets i just sold my G3 and purchased S5 which i can flash any rom i like from any region.
Hi
My dad has a S4 I337 from telcel, and I'd like to know if there's any region free fw?, I had an old S3 (international) so the updates where faster than att one,
please let me know if this is possible, if not only root would work
thanks
I've got lastest one from colombia which is I337MUMUFNK1, so far so good & no problems. it's a debranded firmware with no carrier logos whatsoever.
Starnel said:
I've got lastest one from colombia which is I337MUMUFNK1, so far so good & no problems. it's a debranded firmware with no carrier logos whatsoever.
Click to expand...
Click to collapse
Is that software here? So i can download it and flash it, I want something unlocked so I can install lollipop sooner
Get it at sammobile's firmware portal
Since theres no straight forward answer and the guides seem to be all over the place i was looking for a straight forward answer.can this be unbranded to like the dev edition or something else?
gillim74 said:
Since theres no straight forward answer and the guides seem to be all over the place i was looking for a straight forward answer.can this be unbranded to like the dev edition or something else?
Click to expand...
Click to collapse
Here is about all I can find from someone reliable.
http://forum.xda-developers.com/showpost.php?p=68150390&postcount=866
--To me this says - it should be fine to flash the full US Unlocked RUU/firmware, which is x.xx.617.x, I think the latest is 1.91.617.1
I personally have flashed the pmic-8996-1.img from multiple firmwares including, International, US Unlocked, and Tmobile testing out WiFi drain. So, some bits are ok, but the aboot.img (bootloader) contains the partition, so anything other than VZW or the US Unlocked could result in a brick.
Until someone takes the plunge and reports back, or unless their are people out there whom have done this but not seen the posts asking the question. So hopefully if they are out there they will see this thread and comment.
andybones said:
Here is about all I can find from someone reliable.
http://forum.xda-developers.com/showpost.php?p=68150390&postcount=866
--To me this says - it should be fine to flash the full US Unlocked RUU/firmware, which is x.xx.617.x, I think the latest is 1.91.617.1
I personally have flashed the pmic-8996-1.img from multiple firmwares including, International, US Unlocked, and Tmobile testing out WiFi drain. So, some bits are ok, but the aboot.img (bootloader) contains the partition, so anything other than VZW or the US Unlocked could result in a brick.
Until someone takes the plunge and reports back, or unless their are people out there whom have done this but not seen the posts asking the question. So hopefully if they are out there they will see this thread and comment.
Click to expand...
Click to collapse
Ive read this but theres no straight answer in theory it seems possible http://forum.xda-developers.com/htc-10/how-to/guide-how-to-drand-convert-htc-10-to-t3374593
gillim74 said:
Ive read this but theres no straight answer in theory it seems possible http://forum.xda-developers.com/htc-10/how-to/guide-how-to-drand-convert-htc-10-to-t3374593
Click to expand...
Click to collapse
Yea. I guess just gotta wait to see if anyone has tried it, or pull the trigger yourself.
Mods can you please delete this thread as i got my answer and it wont help me in what i was trying to do please
andybones said:
Here is about all I can find from someone reliable.
http://forum.xda-developers.com/showpost.php?p=68150390&postcount=866
--To me this says - it should be fine to flash the full US Unlocked RUU/firmware, which is x.xx.617.x, I think the latest is 1.91.617.1
I personally have flashed the pmic-8996-1.img from multiple firmwares including, International, US Unlocked, and Tmobile testing out WiFi drain. So, some bits are ok, but the aboot.img (bootloader) contains the partition, so anything other than VZW or the US Unlocked could result in a brick.
Until someone takes the plunge and reports back, or unless their are people out there whom have done this but not seen the posts asking the question. So hopefully if they are out there they will see this thread and comment.
Click to expand...
Click to collapse
I had asked you about this very same thing a couple days back in the Root thread. Glad you were able to find a reliable post, thanks.
Tarima said:
I had asked you about this very same thing a couple days back in the Root thread. Glad you were able to find a reliable post, thanks.
Click to expand...
Click to collapse
Very welcome, my friend. :good:
andybones said:
Very welcome, my friend. :good:
Click to expand...
Click to collapse
Reviving this to ask a related question:
Can I safely flash the latest U.S Unlocked radio to my VZW 10 which has the latest VZW firmware?
If you flash the unlocked radio you will most likely lose all your verizon features such as volte and so on I would not if you use verizon services. For what purpose would you want to may I ask ? If you want to run your Verizon version on At&t or Tmobile there are threads on both I believe, but you should have support for other carriers already I believe as I think you will just get a non Verizon sim message is all but AndyBones can direct you on how to remove that nag.
M9guy said:
If you flash the unlocked radio you will most likely lose all your verizon features such as volte and so on I would not if you use verizon services. For what purpose would you want to may I ask ? If you want to run your Verizon version on At&t or Tmobile there are threads on both I believe, but you should have support for other carriers already I believe as I think you will just get a non Verizon sim message is all but AndyBones can direct you on how to remove that nag.
Click to expand...
Click to collapse
I'm not actually using the phone on Verizon network, I bought it second hand and using it on Rogers network in Canada. Everything runs fine including LTE, but reception is weaker than on my M7 (purchased from Rogers) hence my wanting to try the U.S Unlocked radios to see if things improve. Similarly voice call quality is not that great though it has improved with the 1.82 firmware upgrade.
I don't mind testing out the radio myself, just need some assurance about being able to without bricking the device due to firmware mismatch or other incompatibilities. As pointed out in this thread very little information exists out there from people who have unbranded their VZW 10s or flashed non-VZW radios.
Have you tried running the latest RUU for the Verizon HTC 10 ? This may fix your issue if you have not already. Also I think on another thread Dottat posted a method to reset your bands of some some if you look on his thread for being able to use the unlocked 10 on Verizon he has it posted on there I believe. Resetting the bands or modem has worked for some people with issues with signal.
M9guy said:
Have you tried running the latest RUU for the Verizon HTC 10 ? This may fix your issue if you have not already. Also I think on another thread Dottat posted a method to reset your bands of some some if you look on his thread for being able to use the unlocked 10 on Verizon he has it posted on there I believe. Resetting the bands or modem has worked for some people with issues with signal.
Click to expand...
Click to collapse
I'm not having an "issue" per se, I just want to see if I can get improved reception with a new radio, so I don't think an RUU flash would change much (I have already reset my modem for a separate issue).
Thanks for your help, I'm hoping that andybones or another dev can answer my question about being able to flash a non-vzw radio safely.
Tarima said:
I'm not having an "issue" per se, I just want to see if I can get improved reception with a new radio, so I don't think an RUU flash would change much (I have already reset my modem for a separate issue).
Thanks for your help, I'm hoping that andybones or another dev can answer my question about being able to flash a non-vzw radio safely.
Click to expand...
Click to collapse
Is Rogers a CDMA based carrier (I legit don't know). You may need to do an entire us unlocked swap, not sure if anybody has tried that yet with a vzw phone.
No Rogers is a GSM network but my VZW 10 works fine on it.
If by debranding you mean to convert it to US Unlocked version, then Straightforward answer: Yes. You don't need to read further if all you needed was a yes or no, but I felt I should post what I did to convert it to US unlocked from Verizon for others who might need help.
Verizon 4G LTE devices are already unlocked. So, just to be sure, I S-OFFed my device first via sunshine. While S-OFFing, I chose the option of S-OFF with locked bootloader. Then I changed the CID to BS_US001. Didn't have to change the MID as it was the same as US unlocked version, i.e. 2PS650000. Flashed latest TWRP (for nand backup just in case). Flashed US unlocked RUU 1.8X.617.X. Successfully updated to 1.96.617.2 via OTA.
One thing that I immediately noted after converting to US Unlocked version was that the option of OEM Unlocking which was previously not present in the Verizon version became available in the Developer Options. Hope it helped.
GrimJoke said:
If by debranding you mean to convert it to US Unlocked version, then Straightforward answer: Yes. You don't need to read further if all you needed was a yes or no, but I felt I should post what I did to convert it to US unlocked from Verizon for others who might need help.
Verizon 4G LTE devices are already unlocked. So, just to be sure, I S-OFFed my device first via sunshine. While S-OFFing, I chose the option of S-OFF with locked bootloader. Then I changed the CID to BS_US001. Didn't have to change the MID as it was the same as US unlocked version, i.e. 2PS650000. Flashed latest TWRP (for nand backup just in case). Flashed US unlocked RUU 1.8X.617.X. Successfully updated to 1.96.617.2 via OTA.
One thing that I immediately noted after converting to US Unlocked version was that the option of OEM Unlocking which was previously not present in the Verizon version became available in the Developer Options. Hope it helped.
Click to expand...
Click to collapse
Hi GrimJoke,
Thanks your post! Since I last posted here I've managed to do exactly as you described and ran the Unlocked RUU, updated to 1.96. Now running stock ROM and everything works great, and in fact the phone runs better than it did on vzw software.
I've noticed the same regarding OEM Unlocking. I read from Captain Throwback here that we should now be able to unlock the bootloader with htcdev and with superCID 22222222. I won't try since it's pointless for me.
Tarima said:
Hi GrimJoke,
Thanks your post! Since I last posted here I've managed to do exactly as you described and ran the Unlocked RUU, updated to 1.96. Now running stock ROM and everything works great, and in fact the phone runs better than it did on vzw software.
I've noticed the same regarding OEM Unlocking. I read from Captain Throwback here that we should now be able to unlock the bootloader with htcdev and with superCID 22222222. I won't try since it's pointless for me.
Click to expand...
Click to collapse
Thanks a lot about the bootloader unlocking part. That was the only question I had. Now my life's complete.
GrimJoke said:
If by debranding you mean to convert it to US Unlocked version, then Straightforward answer: Yes. You don't need to read further if all you needed was a yes or no, but I felt I should post what I did to convert it to US unlocked from Verizon for others who might need help.
Verizon 4G LTE devices are already unlocked. So, just to be sure, I S-OFFed my device first via sunshine. While S-OFFing, I chose the option of S-OFF with locked bootloader. Then I changed the CID to BS_US001. Didn't have to change the MID as it was the same as US unlocked version, i.e. 2PS650000. Flashed latest TWRP (for nand backup just in case). Flashed US unlocked RUU 1.8X.617.X. Successfully updated to 1.96.617.2 via OTA.
One thing that I immediately noted after converting to US Unlocked version was that the option of OEM Unlocking which was previously not present in the Verizon version became available in the Developer Options. Hope it helped.
Click to expand...
Click to collapse
how about from Verizon to complete wwe using wwe radios for international gsm network?
does volte work with tmo, att etc after gsm?
I purchased a US Cellular branded Tab S3 to use on AT&T when I found out they sell them unlocked. I also recently wanted Oreo on it and after some digging found US Cellular still hasn't released an update but there was one from Turkey and one from VzW. I tried to find a concrete yes/no if I can flash other variants of the T827 models firmware without luck so figured I'd roll the dice on it myself. This weekend I tracked down the VzW Oreo firmware and used Odin to install it on my US Cell Tab. The first round I had a couple of errors and for a second thought I had a new paper weight, but kept calm and ran through the process again and it worked!
Just a note:
At first boot it will say the SIM is invalid and to put in a VzW SIM, but you can click ok and keep going. Once done setting up on wifi you can then go into settings and add the AT&T APN and connect over cell.
Could you post where you got the VZW image? I'd like to try this. I can't believe USC hasn't updated their tabs yet. I'm tired of asking when the update will arrive!
alfredtv said:
I purchased a US Cellular branded Tab S3 to use on AT&T when I found out they sell them unlocked. I also recently wanted Oreo on it and after some digging found US Cellular still hasn't released an update but there was one from Turkey and one from VzW. I tried to find a concrete yes/no if I can flash other variants of the T827 models firmware without luck so figured I'd roll the dice on it myself. This weekend I tracked down the VzW Oreo firmware and used Odin to install it on my US Cell Tab. The first round I had a couple of errors and for a second thought I had a new paper weight, but kept calm and ran through the process again and it worked!
Just a note:
At first boot it will say the SIM is invalid and to put in a VzW SIM, but you can click ok and keep going. Once done setting up on wifi you can then go into settings and add the AT&T APN and connect over cell.
Click to expand...
Click to collapse
Not sure that was a good idea. If indeed you did manage to flash the VZW bootloader then the tablet is now likely bootloader locked with no way of returning to its original state.
ashyx said:
Not sure that was a good idea. If indeed you did manage to flash the VZW bootloader then the tablet is now likely bootloader locked with no way of returning to its original state.
Click to expand...
Click to collapse
Was this verified to be the case? Also would the verizon combination file work on the uscelluar tablet? I picked up a cheap SM-T827R4 that is FRP locked. I am waiting to hear back from the original owner if they would be willing to bypass the verification for me.
Writermike said:
Was this verified to be the case? Also would the verizon combination file work on the uscelluar tablet? I picked up a cheap SM-T827R4 that is FRP locked. I am waiting to hear back from the original owner if they would be willing to bypass the verification for me.
Click to expand...
Click to collapse
I was able to flash the combo file for the SM-T827V (Verizon version of the Tab S3) to bypass the FRP lock. I used the one on gsm-firmware.com After which I was able to reflash the uscelluar firmware from sammobile. I don't know if this is exactly the same as the OP's method, but hope it helps someone else out in the future.
Writermike said:
I was able to flash the combo file for the SM-T827V (Verizon version of the Tab S3) to bypass the FRP lock. I used the one on gsm-firmware.com After which I was able to reflash the uscelluar firmware from sammobile. I don't know if this is exactly the same as the OP's method, but hope it helps someone else out in the future.
Click to expand...
Click to collapse
Sorry for the late reply on this. I downloaded the image files from sammobile and installed them with odin. I've been up and running on Oreo (VzW branded) since my post and have had no issues or reasons to flash to anything else. I have tried to run an update but it says it can't register, which i assume is because it's hitting the VzW servers w an ATT SIM from a USC device!
Sent from my SM-G955U using Tapatalk
alfredtv said:
I have tried to run an update but it says it can't register, which i assume is because it's hitting the VzW servers w an ATT SIM from a USC device!
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
You just need to put a Verizon SIM in it once (and so far only once) to check for updates. The SIM doesn’t even need to be provisioned. Then you can check for updates with your normal SIM.
I’ve had a VZW Tab S3 for over a year that I have been using with AT&T. I updated to Oreo without any issues with my AT&T SIM installed.
Wanted to first say thanks for the tip -- and echo that The T827R4 does in accept the Verizon Oreo firmware via the latest version of Odin, though with a build just a few releases behind it threw an error and would not flash.
I guess if we can't have root we may as well have Oreo.
Samemobile has the January security update Oreo
alfredtv said:
I purchased a US Cellular branded Tab S3 to use on AT&T when I found out they sell them unlocked. I also recently wanted Oreo on it and after some digging found US Cellular still hasn't released an update but there was one from Turkey and one from VzW. I tried to find a concrete yes/no if I can flash other variants of the T827 models firmware without luck so figured I'd roll the dice on it myself. This weekend I tracked down the VzW Oreo firmware and used Odin to install it on my US Cell Tab. The first round I had a couple of errors and for a second thought I had a new paper weight, but kept calm and ran through the process again and it worked!
Just a note:
At first boot it will say the SIM is invalid and to put in a VzW SIM, but you can click ok and keep going. Once done setting up on wifi you can then go into settings and add the AT&T APN and connect over cell.
Click to expand...
Click to collapse
I just updated to Oreo for SM-T827R4 to January security patch 8.0.0 firmware from Sammobile and it working great.
my370z said:
I just updated to Oreo for SM-T827R4 to January security patch 8.0.0 firmware from Sammobile and it working great.
Click to expand...
Click to collapse
You're right about Verizon firmware running really smooth. Much better than the US Cellular firmware. After flashed VZ firmware, the model changed to SM-T827V.
in case anyone has the us cellular model, you really don't need to flash the verizon firmware because the us cellular model has a more updated firmware than the verizon model.
the model is actually SM-T827R4, oreo with apr 2019 security and OTA update works too.
though no pie update yet (same as verizon)
So these can't be flashed to the stock 820 pie rom?
picachux said:
So these can't be flashed to the stock 820 pie rom?
Click to expand...
Click to collapse
good news, the official pie is available now, OTA downloading now
Verizon model still stuck at oreo
supaet said:
good news, the official pie is available now, OTA downloading now
Verizon model still stuck at oreo
Click to expand...
Click to collapse
Thanks for the heads up will check when I get home.
Sent from my SM-T827R4 using Tapatalk
Got an AT&T phone on ebay, LMV350AWM, want to flash brazilian LMV350EAW ROM on it.
So guys, the V35 was my dream for months, and finally got an Ebay unit that fit can ship here. It's already coming.
I read that LG imported to Brazil the AT&T version, not the korean, with jut a Br ROM on it.
Will this flash work? need the unlocked bootloader for this ? or just LG software ?
You will save yourself some serious inconvenience by making sure it really is sim unlocked before flashing away from the AT&T rom. You can read about someone else's experience on that here:
https://forum.xda-developers.com/lg-v35/help/idea-to-unlock-v35-google-fi-t3905320
Miptzi said:
So guys, the V35 was my dream for months, and finally got an Ebay unit that fit can ship here. It's already coming.
I read that LG imported to Brazil the AT&T version, not the korean, with jut a Br ROM on it.
Will this flash work? need the unlocked bootloader for this ? or just LG software ?
Click to expand...
Click to collapse
cmrntnnr said:
You will save yourself some serious inconvenience by making sure it really is sim unlocked before flashing away from the AT&T rom. You can read about someone else's experience on that here:
https://forum.xda-developers.com/lg-v35/help/idea-to-unlock-v35-google-fi-t3905320
Click to expand...
Click to collapse
Tnx for the link. I've received info that the phone is fully unlocked, and already tested in Brazilian carriers. The previous owner already lived here and used the phone here with no issues. Will keep reading about it nonetheless
Hi mate, I also got an AT&T from USA, (I live in Spain) and I flashed V350AWMH10a_05_TCL_MX_OP_0124.kdz ROM from mexican carrier Telcel.
I use patched LGUP, and it works fine. No unlock bootloader needed.
Also is an Oreo ROM, not Pie, but I prefer, because Pie Roms had problems with call recorders app.