I purchased a US Cellular branded Tab S3 to use on AT&T when I found out they sell them unlocked. I also recently wanted Oreo on it and after some digging found US Cellular still hasn't released an update but there was one from Turkey and one from VzW. I tried to find a concrete yes/no if I can flash other variants of the T827 models firmware without luck so figured I'd roll the dice on it myself. This weekend I tracked down the VzW Oreo firmware and used Odin to install it on my US Cell Tab. The first round I had a couple of errors and for a second thought I had a new paper weight, but kept calm and ran through the process again and it worked!
Just a note:
At first boot it will say the SIM is invalid and to put in a VzW SIM, but you can click ok and keep going. Once done setting up on wifi you can then go into settings and add the AT&T APN and connect over cell.
Could you post where you got the VZW image? I'd like to try this. I can't believe USC hasn't updated their tabs yet. I'm tired of asking when the update will arrive!
alfredtv said:
I purchased a US Cellular branded Tab S3 to use on AT&T when I found out they sell them unlocked. I also recently wanted Oreo on it and after some digging found US Cellular still hasn't released an update but there was one from Turkey and one from VzW. I tried to find a concrete yes/no if I can flash other variants of the T827 models firmware without luck so figured I'd roll the dice on it myself. This weekend I tracked down the VzW Oreo firmware and used Odin to install it on my US Cell Tab. The first round I had a couple of errors and for a second thought I had a new paper weight, but kept calm and ran through the process again and it worked!
Just a note:
At first boot it will say the SIM is invalid and to put in a VzW SIM, but you can click ok and keep going. Once done setting up on wifi you can then go into settings and add the AT&T APN and connect over cell.
Click to expand...
Click to collapse
Not sure that was a good idea. If indeed you did manage to flash the VZW bootloader then the tablet is now likely bootloader locked with no way of returning to its original state.
ashyx said:
Not sure that was a good idea. If indeed you did manage to flash the VZW bootloader then the tablet is now likely bootloader locked with no way of returning to its original state.
Click to expand...
Click to collapse
Was this verified to be the case? Also would the verizon combination file work on the uscelluar tablet? I picked up a cheap SM-T827R4 that is FRP locked. I am waiting to hear back from the original owner if they would be willing to bypass the verification for me.
Writermike said:
Was this verified to be the case? Also would the verizon combination file work on the uscelluar tablet? I picked up a cheap SM-T827R4 that is FRP locked. I am waiting to hear back from the original owner if they would be willing to bypass the verification for me.
Click to expand...
Click to collapse
I was able to flash the combo file for the SM-T827V (Verizon version of the Tab S3) to bypass the FRP lock. I used the one on gsm-firmware.com After which I was able to reflash the uscelluar firmware from sammobile. I don't know if this is exactly the same as the OP's method, but hope it helps someone else out in the future.
Writermike said:
I was able to flash the combo file for the SM-T827V (Verizon version of the Tab S3) to bypass the FRP lock. I used the one on gsm-firmware.com After which I was able to reflash the uscelluar firmware from sammobile. I don't know if this is exactly the same as the OP's method, but hope it helps someone else out in the future.
Click to expand...
Click to collapse
Sorry for the late reply on this. I downloaded the image files from sammobile and installed them with odin. I've been up and running on Oreo (VzW branded) since my post and have had no issues or reasons to flash to anything else. I have tried to run an update but it says it can't register, which i assume is because it's hitting the VzW servers w an ATT SIM from a USC device!
Sent from my SM-G955U using Tapatalk
alfredtv said:
I have tried to run an update but it says it can't register, which i assume is because it's hitting the VzW servers w an ATT SIM from a USC device!
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
You just need to put a Verizon SIM in it once (and so far only once) to check for updates. The SIM doesn’t even need to be provisioned. Then you can check for updates with your normal SIM.
I’ve had a VZW Tab S3 for over a year that I have been using with AT&T. I updated to Oreo without any issues with my AT&T SIM installed.
Wanted to first say thanks for the tip -- and echo that The T827R4 does in accept the Verizon Oreo firmware via the latest version of Odin, though with a build just a few releases behind it threw an error and would not flash.
I guess if we can't have root we may as well have Oreo.
Samemobile has the January security update Oreo
alfredtv said:
I purchased a US Cellular branded Tab S3 to use on AT&T when I found out they sell them unlocked. I also recently wanted Oreo on it and after some digging found US Cellular still hasn't released an update but there was one from Turkey and one from VzW. I tried to find a concrete yes/no if I can flash other variants of the T827 models firmware without luck so figured I'd roll the dice on it myself. This weekend I tracked down the VzW Oreo firmware and used Odin to install it on my US Cell Tab. The first round I had a couple of errors and for a second thought I had a new paper weight, but kept calm and ran through the process again and it worked!
Just a note:
At first boot it will say the SIM is invalid and to put in a VzW SIM, but you can click ok and keep going. Once done setting up on wifi you can then go into settings and add the AT&T APN and connect over cell.
Click to expand...
Click to collapse
I just updated to Oreo for SM-T827R4 to January security patch 8.0.0 firmware from Sammobile and it working great.
my370z said:
I just updated to Oreo for SM-T827R4 to January security patch 8.0.0 firmware from Sammobile and it working great.
Click to expand...
Click to collapse
You're right about Verizon firmware running really smooth. Much better than the US Cellular firmware. After flashed VZ firmware, the model changed to SM-T827V.
in case anyone has the us cellular model, you really don't need to flash the verizon firmware because the us cellular model has a more updated firmware than the verizon model.
the model is actually SM-T827R4, oreo with apr 2019 security and OTA update works too.
though no pie update yet (same as verizon)
So these can't be flashed to the stock 820 pie rom?
picachux said:
So these can't be flashed to the stock 820 pie rom?
Click to expand...
Click to collapse
good news, the official pie is available now, OTA downloading now
Verizon model still stuck at oreo
supaet said:
good news, the official pie is available now, OTA downloading now
Verizon model still stuck at oreo
Click to expand...
Click to collapse
Thanks for the heads up will check when I get home.
Sent from my SM-T827R4 using Tapatalk
Related
Hi, I bought a Galaxy S7 edge sm-g935a, and I'm using it here in Japan with other network. I'm just wondering why everytime I check for an update, it always says I'm on the latest firmware even when I'm like 3 or 4 versions behind. Even when I connect it to smart switch it also says I'm on the latest firmware too, and when I try to click on firmware upgrade and device initialization, it says "Galaxy S7 Edge does not support initializing, please contact customer support". What should I do to get OTA updates? Thanks
AT&T phones will not receive OTA updates if you're not on the AT&T network. You have to manually flash them. You could keep downloading the latest firmware and flash it, or you could download the U firmware, which will receive updates regardless of carrier.
Sent from my SAMSUNG-SM-G935A using Tapatalk
ajemnace said:
Hi, I bought a Galaxy S7 edge sm-g935a, and I'm using it here in Japan with other network. I'm just wondering why everytime I check for an update, it always says I'm on the latest firmware even when I'm like 3 or 4 versions behind. Even when I connect it to smart switch it also says I'm on the latest firmware too, and when I try to click on firmware upgrade and device initialization, it says "Galaxy S7 Edge does not support initializing, please contact customer support". What should I do to get OTA updates? Thanks
Click to expand...
Click to collapse
I'd consider switching to the 935U Firmware, it kills the useless AT&T bloat, and you'll get OTA's
https://forum.xda-developers.com/att-s7-edge/how-to/updated-935u-935a-live-links-pi3-t3501686
stew1411 said:
AT&T phones will not receive OTA updates if you're not on the AT&T network. You have to manually flash them. You could keep downloading the latest firmware and flash it, or you could download the U firmware, which will receive updates regardless of carrier.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Click to expand...
Click to collapse
Thanks man, I tried searching for its latest firmware but none of it seems to work out, I found some on google and download it but when I tried to unzip the files, all the files that I've downloaded we're corrupted LOL. I'm now switching to 935U firmware :good:
My S7 edge won't update either. I seem to be stuck on the May 2017 security update (Build # G935AUCS4BQE1). I bought my phone from swappa.com last month. The seller had it listed in the AT&T section as the SM-935A. I can use it for the most part without any issues (no Wi-Fi calling, not recognized on the AT&T network). When I check the IMEI # with Samsung, they show it listed for Sprint. Any suggestions of what I should do? I know one option is to flash the 935U firmware.
Thanks in advance.
caferacer73 said:
My S7 edge won't update either. I seem to be stuck on the May 2017 security update (Build # G935AUCS4BQE1). I bought my phone from swappa.com last month. The seller had it listed in the AT&T section as the SM-935A. I can use it for the most part without any issues (no Wi-Fi calling, not recognized on the AT&T network). When I check the IMEI # with Samsung, they show it listed for Sprint. Any suggestions of what I should do? I know one option is to flash the 935U firmware.
Thanks in advance.
Click to expand...
Click to collapse
All US (Snapdragon) based S7 Edges are physically identical, so you can run AT&T firmware on a Sprint S7E and vice-versa. However, AT&T is well known for disabling features based on IMEI, which it appears they are doing for WiFi calling. Unfortunately, it appears someone converted a device that started life on Sprint, so unfortunately you may be out of luck. The only way to fix the problem that I am aware of is to temporarily switch your SIM out for an actual AT&T device (whose IMEI is recognized), and that supports WiFi calling and VoLTE, then put the SIM back in your converted S7 Edge.
Converting to U will definitely make the phone a LOT faster (and the battery last longer), but you are giving up on any carrier features period at that point. I personally felt that the performance and battery features were a lot more important to me than WiFi calling or VoLTE and I switched to U a while ago. I haven't looked back, but that's just me.
Thanks jshamlet. I did a chat with Samsung and they confirmed that my phone was originally setup for Sprint and that it has been unlocked. My fiancee has an AT&T branded S7 Edge, so I can try putting my SIM in her phone for a bit. Converting to the U is something I'll seriously consider. I had an unlocked Moto X Pure Edition, so I'm used to not having the Wi-Fi calling or VoLTE.
I ended up using Odin to flash the SM-G935U firmware to my phone. Once that was finished, it downloaded and installed the April - August security updates, so I'm happy now. Also, no AT&T bloatware.
Here are the Firmware updates for the ATT 935A.
https://forum.xda-developers.com/att-s7-edge/how-to/updates-g935a-servers-adb-sideloads-t3583165
QJ3 <stock sprint> updated the bootloader from v4 to v5. Just a heads up for those of you wanting to flash the U firmware and getting errors.
So, probably a dumb question, but what do I need to do to avoid the errors? I messed up trying to flash a T-Mobile rom right after updating the firmware, and now I can't boot. I can get to download mode, but can't find a firmware that will flash without failing.
From what reading I've done, I need to find a newer firmware than the one that was on my phone originally, but I can't seem to find anything that will work.
prnorm said:
So, probably a dumb question, but what do I need to do to avoid the errors? I messed up trying to flash a T-Mobile rom right after updating the firmware, and now I can't boot. I can get to download mode, but can't find a firmware that will flash without failing.
From what reading I've done, I need to find a newer firmware than the one that was on my phone originally, but I can't seem to find anything that will work.
Click to expand...
Click to collapse
You should be able to flash QJ3 or maybe the latest tmob one. Check sammobile or updato... Just checked, not posted yet. Have you tried a Google search for the qj3 firmware?
lvpre said:
You should be able to flash QJ3 or maybe the latest tmob one. Check sammobile or updato... Just checked, not posted yet. Have you tried a Google search for the qj3 firmware?
Click to expand...
Click to collapse
Thank you, I wasn't sure what the latest version is so that helps. I did try flashing the latest T-Mo and Sprint firmwares on both Sammobile and updato.com, but it looks like neither are newer than QJ3 so I guess that's my problem. I'll just search or wait to find a new version posted. This phone isn't a daily driver so it's not critical right now.
prnorm said:
Thank you, I wasn't sure what the latest version is so that helps. I did try flashing the latest T-Mo and Sprint firmwares on both Sammobile and updato.com, but it looks like neither are newer than QJ3 so I guess that's my problem. I'll just search or wait to find a new version posted. This phone isn't a daily driver so it's not critical right now.
Click to expand...
Click to collapse
I had the same issue and just loaded the latest PIT. It allowed me to start my phone with my old Sprint OS.
Here is a version of the QJ3 zip for odin.
Click Here
You should be able to flash and restore your phone
lvpre said:
Here is a version of the QJ3 zip for odin.
Click Here
You should be able to flash and restore your phone
Click to expand...
Click to collapse
Thanks so much, this worked perfectly.
Has anyone tried going to the u firmware via pit file? I remember this working in the past. You have to flash the version pit file and previous stock rom, then you could flash the u rom.
Is there any way to downgrade bootloader from P version and then install U version?
Meerk4t said:
Is there any way to downgrade bootloader from P version and then install U version?
Click to expand...
Click to collapse
Maybe. About a year ago, you could load a PIT file. Not sure if that method works with the newest bootloader. @spamforme mentioned something about it a few posts ago.
Meerk4t said:
Is there any way to downgrade bootloader from P version and then install U version?
Click to expand...
Click to collapse
Right now there is no way to downgrade to install the U version software. Sprint upgraded to the version 5 bootloader and is the only carrier in the US to do so, so you can't install any other carrier software on your S7 or S7 Edge right now once you have Sprint software installed on it. I have a SM-G930U I took to sprint this past July under the 1 year free service before taxes promotion. Fully unlocked version I purchased online, after having trouble installing a Sprint sim, I had to go in to the store to get the phone to activate.
Once activated Sprint sim locked my unlocked phone(found this out 2 months later when I tried to put another sim in it.) At this point it was still running the SM-G930U Unlocked firmware. I escalated a sim unlock request in September, 2 months pasted and they still didn't unlock my phone. I ended up having to go back in to a Sprint Store to facilitate the unlock, and during that process the Sprint store, flashed my phone to 5BQJ3, that being said, after they did that to unlock my phone they were unable to put the Unlocked firmware back on the phone in the store, I have failed to put the unlocked firmware back on my phone since also, I have escalated this to Samsung, as my phone is under warranty and Samsung say there is nothing they can do. So Sprint sim locked my unlocked phone, and during the process of getting my sim unlocked phone back unlocked, they hijacked my phones software and put all the sprint bloatware and malware on my S7 SM-G930U unlocked phone, and it can't be removed currently as Sprint is the only carrier using bootloader 5 in the US.
I ended up filling out a complaint with the FCC about this last week, and waiting for Sprint to respond as the FCC filed the complaint with Sprint on December 22, 2017. and they have 30 days to respond. But I have tried everything I can think of to get the phone back to the U version software without any resolve. As far as I am concerned Sprint owes me a replacement Samsung Galaxy S7 Unlocked phone or newer model, and right now the only "Unlocked" variant Samsung phone Sprint even stocks is the new S8 Active SM-G892U phone which is the same phone for Sprint as it is for T-Mobile; but we shall see what happens I am not holding my breath with Sprint and will probably just have to take them to small claims court for the replacement cost of my phone as it is cheaper than submitting a formal grievance with the FCC is the informal one doesn't solve the issue.
is there any other carrier firmware with the same bootloader version that i can flash to? i need a phone for Verizon, i'm stuck on the sprint firmware. there's a band that is disabled on the sprint one. hopefully one of the others, if there is one available, will have the bands needed enabled.
oponewbie said:
Right now there is no way to downgrade to install the U version software. Sprint upgraded to the version 5 bootloader and is the only carrier in the US to do so, so you can't install any other carrier software on your S7 or S7 Edge right now once you have Sprint software installed on it. I have a SM-G930U I took to sprint this past July under the 1 year free service before taxes promotion. Fully unlocked version I purchased online, after having trouble installing a Sprint sim, I had to go in to the store to get the phone to activate.
Once activated Sprint sim locked my unlocked phone(found this out 2 months later when I tried to put another sim in it.) At this point it was still running the SM-G930U Unlocked firmware. I escalated a sim unlock request in September, 2 months pasted and they still didn't unlock my phone. I ended up having to go back in to a Sprint Store to facilitate the unlock, and during that process the Sprint store, flashed my phone to 5BQJ3, that being said, after they did that to unlock my phone they were unable to put the Unlocked firmware back on the phone in the store, I have failed to put the unlocked firmware back on my phone since also, I have escalated this to Samsung, as my phone is under warranty and Samsung say there is nothing they can do. So Sprint sim locked my unlocked phone, and during the process of getting my sim unlocked phone back unlocked, they hijacked my phones software and put all the sprint bloatware and malware on my S7 SM-G930U unlocked phone, and it can't be removed currently as Sprint is the only carrier using bootloader 5 in the US.
I ended up filling out a complaint with the FCC about this last week, and waiting for Sprint to respond as the FCC filed the complaint with Sprint on December 22, 2017. and they have 30 days to respond. But I have tried everything I can think of to get the phone back to the U version software without any resolve. As far as I am concerned Sprint owes me a replacement Samsung Galaxy S7 Unlocked phone or newer model, and right now the only "Unlocked" variant Samsung phone Sprint even stocks is the new S8 Active SM-G892U phone which is the same phone for Sprint as it is for T-Mobile; but we shall see what happens I am not holding my breath with Sprint and will probably just have to take them to small claims court for the replacement cost of my phone as it is cheaper than submitting a formal grievance with the FCC is the informal one doesn't solve the issue.
Click to expand...
Click to collapse
Wow - nice persistence following up with FCC! Would love to hear how that gets resolved. I'm also stuck with a 930P v5 bootloader and no way to install 930U firmware. What is the best way to track 930U firmware bootloader versions so that I know if/when v5 is released?
kpl388 said:
Wow - nice persistence following up with FCC! Would love to hear how that gets resolved. I'm also stuck with a 930P v5 bootloader and no way to install 930U firmware. What is the best way to track 930U firmware bootloader versions so that I know if/when v5 is released?
Click to expand...
Click to collapse
G930UUES4BQL1 is bootloader 4.
G930UUEU2APG9 is bootloader 2.
G930PVPU5BQJ3 is bootloader 5.
At the end, go 5 digits back and you will get the boot binary version. So when the U firmware gets to G930UXXX5XXXX it should be good to go. Based on the U history, it looks like the bootloader will get updated if/when oreo gets dropped to the device. It seems like they went with 2 for MM; 4 for Nougat; and hopefully 5 for Oreo. Every carrier seems to be updating the bootloader version about 5 months before the actual release of the new OS...maybe that means that Sprint will be the first to receive Oreo.
lvpre said:
G930UUES4BQL1 is bootloader 4.
G930UUEU2APG9 is bootloader 2.
G930PVPU5BQJ3 is bootloader 5.
At the end, go 5 digits back and you will get the boot binary version. So when the U firmware gets to G930UXXX5XXXX it should be good to go. Based on the U history, it looks like the bootloader will get updated if/when oreo gets dropped to the device. It seems like they went with 2 for MM; 4 for Nougat; and hopefully 5 for Oreo. Every carrier seems to be updating the bootloader version about 5 months before the actual release of the new OS...maybe that means that Sprint will be the first to receive Oreo.
Click to expand...
Click to collapse
Thanks so much for the great info!
If we wait for oreo and it has bootloader 5 then it will be great assuming we do not update the sprint oreo first potentially changing the bootloader version number again. Would be great but I guess now we will just wait and see
oponewbie said:
Right now there is no way to downgrade to install the U version software. Sprint upgraded to the version 5 bootloader and is the only carrier in the US to do so, so you can't install any other carrier software on your S7 or S7 Edge right now once you have Sprint software installed on it. I have a SM-G930U I took to sprint this past July under the 1 year free service before taxes promotion. Fully unlocked version I purchased online, after having trouble installing a Sprint sim, I had to go in to the store to get the phone to activate.
Once activated Sprint sim locked my unlocked phone(found this out 2 months later when I tried to put another sim in it.) At this point it was still running the SM-G930U Unlocked firmware. I escalated a sim unlock request in September, 2 months pasted and they still didn't unlock my phone. I ended up having to go back in to a Sprint Store to facilitate the unlock, and during that process the Sprint store, flashed my phone to 5BQJ3, that being said, after they did that to unlock my phone they were unable to put the Unlocked firmware back on the phone in the store, I have failed to put the unlocked firmware back on my phone since also, I have escalated this to Samsung, as my phone is under warranty and Samsung say there is nothing they can do. So Sprint sim locked my unlocked phone, and during the process of getting my sim unlocked phone back unlocked, they hijacked my phones software and put all the sprint bloatware and malware on my S7 SM-G930U unlocked phone, and it can't be removed currently as Sprint is the only carrier using bootloader 5 in the US.
I ended up filling out a complaint with the FCC about this last week, and waiting for Sprint to respond as the FCC filed the complaint with Sprint on December 22, 2017. and they have 30 days to respond. But I have tried everything I can think of to get the phone back to the U version software without any resolve. As far as I am concerned Sprint owes me a replacement Samsung Galaxy S7 Unlocked phone or newer model, and right now the only "Unlocked" variant Samsung phone Sprint even stocks is the new S8 Active SM-G892U phone which is the same phone for Sprint as it is for T-Mobile; but we shall see what happens I am not holding my breath with Sprint and will probably just have to take them to small claims court for the replacement cost of my phone as it is cheaper than submitting a formal grievance with the FCC is the informal one doesn't solve the issue.
Click to expand...
Click to collapse
Did we ever get an update on this?
I bought my s8 today. I am on security patch of April. Whenever i tap on software update it says latest software already installed. My brother's s8 on the other hand is on October security patch. When i try to use Bixby voice it says update software to latest to use it. Pics below.
[Bixby error](https://i.imgur.com/Pz1CT6j.png)
[Message that already have latest software](https://i.imgur.com/A9BveEZ.png)
[Phone model](https://i.imgur.com/MJ7IxfF.png)
[Software info](https://i.imgur.com/8Kqmhz9.jpg)
same boat
What kind of s8? Is it through a carrier? I have the same problem with AT&T branded. I called AT&T and after they tried to push the update to my phone after getting my IMEI and SIM info verified, nothing happened. They referred me to Samsung. Samsung said I could drive to a Best Buy an hour a way and they could load the latest software in the store. In other words, no one really is accepting responsibility for it. I am basically at the point now where I've decided to flash the updates myself.
mhh84 said:
What kind of s8? Is it through a carrier? I have the same problem with AT&T branded. I called AT&T and after they tried to push the update to my phone after getting my IMEI and SIM info verified, nothing happened. They referred me to Samsung. Samsung said I could drive to a Best Buy an hour a way and they could load the latest software in the store. In other words, no one really is accepting responsibility for it. I am basically at the point now where I've decided to flash the updates myself.
Click to expand...
Click to collapse
I have identified the issue. My S8 is on UK firmware whereas my brother's is on Indian cuz he got dual sim. Is there any way to update to a global firmware or a firmware that gets updates everytime?
Netherdrake034 said:
I have identified the issue. My S8 is on UK firmware whereas my brother's is on Indian cuz he got dual sim. Is there any way to update to a global firmware or a firmware that gets updates everytime?
Click to expand...
Click to collapse
I'm by no means an expert, but as I understand it, all carrier branded updates go from Samsung to the carriers and from the carriers to your phone. Only unlocked comes from Samsung to you. (anyone feel free to correct me if I'm wrong).
If your carrier isn't pushing the update to you it could be because the carrier is not sending you the update because of the SIM issue if there's a mismatch in their system. There may be other reasons too, but that seems to be a common one.
Otherwise if you want to update firmware and it's not being sent to your phone, I believe the only alternative is doing it yourself. Check this forum for more advice.
Netherdrake034 said:
I have identified the issue. My S8 is on UK firmware whereas my brother's is on Indian cuz he got dual sim. Is there any way to update to a global firmware or a firmware that gets updates everytime?
Click to expand...
Click to collapse
That firmware AQDG is old, from like April this year. You can download a different firmware or an updated UK firmware from updato.com and update with Odin. Knox will not be tripped.
Sorry guys, complete amateur here. I have an AT&T S8+ that was unlocked using a code from AT&T.
I switched to T-Mobile and my phone worked perfectly after simply inserting a T-Mobile sim.
Carriers push updates over the air and I assumed I would have put in an AT&T sim to get the oreo update, but it's been out forever and I have not been able to update my phone. I've been busy and never got around to it. My phone was working fine so I just it slide.
I've tried using an AT&T sim. I've restarted my phone with the AT&T sim in it. I've tried manually searching for the update. I've tried smart switch. I even went to the Samsung experience store in NYC and they had no solution. My phone will not update.
Any suggestions?
SM-G955U
Android Version 7.0
Android security patch level April 1st, 2017
Baseband - G955USQU1AQDE
I've been reading some of these threads and I'm not sure if this is correct, but I can use Odin 3.13.1 to flash to CRB9? That would get me to the first Oreo release?
Sorry if this is not the correct place for this thread. Thanks
Hi,
I have read through a bunch of threads but have not seen my exact situation but I think I know what I have to do but want to get some advice from the experts here.
I purchased an AT&T branded phone an activated on AT&T a year ago. We needed to switch to Verizon so I got the unlock code from AT&T and switched no problem. As part of the switch Samsung has a BYOD feature that changes some of the software and menus from AT&T to Verizon. It was actually pretty cool because it removed the ATT apps loaded some VZW instead. Below is a link that describes the feature if you are not familiar:
Enjoy the Freedom of BYOD
So all is mostly good except I believe the menu change to update the firmware OTA is pointing to VZW and not ATT. When I run the update check it just says no updated needed. Looking at VZW they have updated their latest OTA version on August 1st here G950USQU5CRH1 so I know it is not trying to update to that.
ATT just released their version today August 30th here G950USQS5CRH1 but that is not updating either.
I will try this again over the next couple days to see if the updater is smart enough to find the ATT version but I am guessing I am probably in no man's land and will need to update manually using SamMobile or Updato or something else.
Any thoughts are very much appreciated.
Thank you.
I have tried a number of things like all the Verizon tools, Smart Switch, etc. and nothing will trigger a download.
I am downloading the only file from SamMobile that looks like the same version on the AT&T site but is says it is Verizon hopefully that will not matter. I will try to flash it with Odin and see what happens.
As an alternate I chatted with Samsung and they gave me the address of the a Best Buy in my area that will update the firmware for me. I guess some of the BB have Samsung techs in them. Kind of a pain but at least there is a back up.
Not sure if anyone is following this but I thought I would close this out. All options have failed.
Not even Samsung at Best Buy can flash the firmware since in their tool my phone shows up as VZW/VZW/ATT. So what I thought was a cool feature of the BYOD changing carriers only cripples the phone from an Update perspective, what a bad design. I would change carrier firmware as in some of the guides here but the problem is that I do not have G950U1 or G950U2. I have G950US which the older guides do not address.
I am either going to buy a prepaid ATT card but I hate to give those horrible people another dime or I will sell this phone and maybe just get Samsung branded like others in my family and they get updates from Samsung or go get an iPhone. I dislike iPhones a lot but at least Apple does not let the carriers screw around with their firmware.
Solved! Not sure why this site never showed up in my previous searches here or on the web.
https://samsung.firmware.science
Found the latest 2 OTA updates and applied them perfectly.
Well I can't say I've ran into this problem, but I to use ATT and am looking to eventually move to VZW, so I really appreciate your time and effort in making this thread as this isnt something I would have thought of myself. Also, that website is kick a**! thanks for sharing that
I was an ATT customer for 14 years on my wireless. The migration on the family 2 iPhones, 1 Samsung unlocked S8+ and my ATT S8 went perfect. I am the only one that had the firmware update problem because the other devices get updates directly from Apple of course and Samsung for the S8+.
My experience so far with VZW is excellent! For our family plan it was a little cheaper but our main reason fro moving was the network quality. Verizon in my area is so far ahead of ATT it is really shocking. Great call quality and data and coverage is fantastic. We had so many problems with ATT not sure why I stayed so long. They gave me a piece of junk Microcell to try and fix the issues at my house but even when we go to the ATT store that is 1 mile away, they do not even get wireless service in the store. They all have to use WiFi calling.
I have to really be impressed to recommend a company but VZW technology is well worth it for me. We will see how the rest to the customer services is.
What happened with the firmware you flashed with Odin? You can go to Updato.com and Download G950U or U1 firmware which is MUCH faster than the hours Sammobile takes. With newer firmware you can flash any carriers firmware (Go to Updato and download VZW firmware for example) because your phone installs the necessary files depending on the sim card you're running. Been that way for quite a while now.
Be careful with Firmware science as some of those builds aren't what is released so when a newer update does drop from VZW you wont get it again because you have a conflicting build number. Then you'll be back here asking why. Also, every time there's an updated firmware on FW Science you'll have to reinstall everything as flashing that update.zip wipes the phone post install. It gets really old.
jpcdeux said:
What happened with the firmware you flashed with Odin? You can go to Updato.com and Download G950U or U1 firmware which is MUCH faster than the hours Sammobile takes. With newer firmware, you can flash any carriers firmware (Go to Updato and download VZW firmware for example) because your phone installs the necessary files depending on the sim card you're running. Been that way for quite a while now.
Be careful with Firmware science as some of those builds aren't what is released so when a newer update does drop from VZW you won't get it again because you have a conflicting build number. Then you'll be back here asking why. Also, every time there's an updated firmware on FW Science you'll have to reinstall everything as flashing that update.zip wipes the phone post install. It gets really old.
Click to expand...
Click to collapse
Hi thanks for your input, I have 1 question to you, as I understand from your post you are talking about if mobile is already on VRZ firmware but have issue with OTA update? am I right? if not could you be so kind to tell me I'm on AT&T firmware G892AUCS3BRG1 (AT&T OREO Firmware) can I somehow switch to VRW or some other carrier? in addition, I have no Verizon sim and no AT&T sim as well I'm in Georgia and in our area, there are no such operators.
from my perspective it is good to have TMB firmware this would be the best option for me if it is possible
thank you in advance for your cooperation
vazovskiiii said:
Hi thanks for your input, I have 1 question to you, as I understand from your post you are talking about if mobile is already on VRZ firmware but have issue with OTA update? am I right? if not could you be so kind to tell me I'm on AT&T firmware G892AUCS3BRG1 (AT&T OREO Firmware) can I somehow switch to VRW or some other carrier? in addition, I have no Verizon sim and no AT&T sim as well I'm in Georgia and in our area, there are no such operators.
from my perspective it is good to have TMB firmware this would be the best option for me if it is possible
thank you in advance for your cooperation
Click to expand...
Click to collapse
When you flash firmware it installs carrier files based on the Sim card in your phone
jpcdeux said:
When you flash firmware it installs carrier files based on the Sim card in your phone
Click to expand...
Click to collapse
i understand but can i switch from at&t firmware to vrz or tmb firmware?
vazovskiiii said:
i understand but can i switch from at&t firmware to vrz or tmb firmware?
Click to expand...
Click to collapse
If you install a different sim card it will basically switch to that carriers firmware
jpcdeux said:
If you install a different sim card it will basically switch to that carriers firmware
Click to expand...
Click to collapse
sorry but this is incorrect.
vazovskiiii said:
sorry but this is incorrect.
Click to expand...
Click to collapse
Okay then. Figure it out yourself.
Hi
I already did and nothing changed, that is the reason why i replyed