Samsung Note n9005 AUSTRALIAN Help - Galaxy Note 3 Q&A, Help & Troubleshooting

Help i have a Australian SM-N9005 and i rooted fine and flashed the Omega rom which worked perfectly. I decided to some of the other roms out there and after flashing ROM][XXBUMI7][V1.1][8/10][N9005] K.I.D.1412| Fast|Clean|Stable|battery life| now my phone just boot loops after intial Samsung Note 3 logo. I can get into CWM still and Odin Mode and have tried flashing Kernel, Recovery etc etc and also a few other roms with the same boot loop. Anyone know what would be going on?

If that was happening to me. I would take out my Sd card and go into cwm wipe all! Then flash over stock with Odin
Sent from my SM-N9005 using XDA Premium 4 mobile app

I ended up getting a swap over as the Aussie XSA Firmware not out yet. I'm not rooting mine again until more roms released and Aussies be careful flashing the roms already released

I recently upgraded my Optus contract and picked up the note 3. It has Optus branding. Once the Australian XSA firmware is released am I able to flash over the Optus firmware via odin like we used to do with previous Samsung devices or am I going to trigger knox? I'm not fussed about root for now, I just don't want the Optus crap.

Hey guys,
Any updates on if we can flash the sea firmware over the top via Odin?
Tobz

VanHermiz said:
I recently upgraded my Optus contract and picked up the note 3. It has Optus branding. Once the Australian XSA firmware is released am I able to flash over the Optus firmware via odin like we used to do with previous Samsung devices or am I going to trigger knox? I'm not fussed about root for now, I just don't want the Optus crap.
Click to expand...
Click to collapse
There is one called SM-N9005 Australia 2013 October 4.3 N9005XXUBMI7 N9005XSABMI1
from sammobile.com
does it work?
I dont dare to flash yet... cos I dont want to lose my 2+1 years warranty.

Knox and Region Lock better play safe, who knows after flash firmware from different region Our phone will become one of region locked phone.
-I wait for Devs figure out the way to disable Knox counter flag.

uccoffee.forum said:
There is one called SM-N9005 Australia 2013 October 4.3 N9005XXUBMI7 N9005XSABMI1
from sammobile.com
does it work?
I dont dare to flash yet... cos I dont want to lose my 2+1 years warranty.
Click to expand...
Click to collapse
I tried to flash this on my n9005 from Kogan (Phone come from Hong Kong) & it kept failing in odin right at the end.
I eventually had to do a firmware recovery with Kies to get it working again

uccoffee.forum said:
There is one called SM-N9005 Australia 2013 October 4.3 N9005XXUBMI7 N9005XSABMI1
from sammobile.com
does it work?
I dont dare to flash yet... cos I dont want to lose my 2+1 years warranty.
Click to expand...
Click to collapse
I downloaded that from sammobile.com last night, I don't want to flash until I know it wont trigger knox. I've got 2 more years on this contract so warranty is important right now lol.
KTM690 said:
I tried to flash this on my n9005 from Kogan (Phone come from Hong Kong) & it kept failing in odin right at the end.
I eventually had to do a firmware recovery with Kies to get it working again
Click to expand...
Click to collapse
Not sure but could be that your phone is region locked to Hong Kong and you're flashing firmware from another region? But then again I remember reading someone downloaded Unknown - XSI from sammobile and flashed it without having problems and it supposedly didn't trigger knox not sure what firmware he was on though.

If it's region locked it says so on the box
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Didn't know that cause I didn't have that sticker on my note 3 box. Thanks for the info.
Sent from my SM-N9005 using XDA Premium 4 mobile app

My N3 is also from Kogan. I suspect mine was activated in Hong Kong before being shipped to me even though the OLB region is not meant to have Region Lock enabled. I had written to Kogan before buying the phone enquiring on the Region Lock of the devices they ship. I guess they activated the phone in Hong Kong just to be safe.
Looking forward to rooting and loading Omega ROM but until the process is a little more mature, I'm holding off.
Great to see so many people working hard on this device.
Sent from my SM-N9005 using XDA Premium 4 mobile app

For others who purchased from Kogan, refer to this post and the responses:
http://forum.xda-developers.com/showthread.php?p=46449951
Sent from my SM-N9005 using XDA Premium 4 mobile app

I have an Optus N3. Flashed another stock firmware over the optus one before flashing Omega Rom. Works beautifully. Cant wait for kernels to come out so i can play with it more (undervolting, etc).
Love the Xposed installer with modules.

Hi,
I also am worried to flash anything at the moment.
Does that XSA Firmware (I'm assuming that means open, like directly from Samsung AUS...?) trigger KNOX counter? Its official firmware, I'd assume not, just wanted to see what others say or have had happen...
Do you guys think its better to wait till carrier updates to 4.4.2, so bootloader and everything gets done officially. then root and flash 4.4.2 roms?
Or I can just flash the Polish (or other NA7) 4.4.2 (NA7) and just go from there? Dam, I'm not sure yet...if anyone shed some light on this that would be great!!
Thanks advance guys!!

Lambetts said:
Hi,
I also am worried to flash anything at the moment.
Does that XSA Firmware (I'm assuming that means open, like directly from Samsung AUS...?) trigger KNOX counter? Its official firmware, I'd assume not, just wanted to see what others say or have had happen...
Do you guys think its better to wait till carrier updates to 4.4.2, so bootloader and everything gets done officially. then root and flash 4.4.2 roms?
Or I can just flash the Polish (or other NA7) 4.4.2 (NA7) and just go from there? Dam, I'm not sure yet...if anyone shed some light on this that would be great!!
Thanks advance guys!!
Click to expand...
Click to collapse
You can flash any Stock Samsung rom without triggering Knox however, due to a new bootloader in the Kitkat rom once you flash it you can't go back to the Aussie JB rom...
You should be able to go to the Aussie KK rom when it comes out but until then you are stuck using other country roms and modems....
I had the Polish NA7 rom installed and it worked OK however my phone was rooted so I didn't have some of the problems others have reported - apps unable to access/write to internal/external sd cards...
Since then I went to custom roms, much better...

Oh ok I see. Thanks for your reply.
So what do you recommend? Can't I flash the polish to get my boot loader updated then flash a custom kit kat rom? Then when an Australian one comes out flash stock again then root again? Is that possible?
I've never had this problem where I've been faced with how I can't "go back" Haha.
Thanks again.
Sent from my SM-N9005 using XDA Premium 4 mobile app

Anyone know where i can get stock aus firmware higher than;
N9005XXUBMI7_N9005XSABMI1_XSA
Was preloaded JB 4.3 i forgot to save backup before i flashed.
I went to a KK 4.4 CM ROM straight out of the box.
I decided i wanted to revert to stock and play with the touchwiz features.
Strangely i flashed via odin the wrong firmware.
Pretty sure it was this one;
N9005XXUDML3_N9005IDEDML4_IDE
Which ended up being polish JB 4.3 (Orange)
And it worked.
=\
Forgetting my confusion about reverting from KK to JB,
After downloading aus firmware from sammobile,
Both the retail and telstra are failing with this message;
W REV. CHECK FAIL : fused : 2 . Binary : 1
Checked the forums but only found threads relevant to SGSIV.
Something about new OTA update blocking root.
Any help?
Oh and if possible id prefer stock retail to telstra branded.
Cheers.
Edit ; sorted, found them, Sammobile just takes abit of navigating.

Wobzy said:
Anyone know where i can get stock aus firmware higher than;
N9005XXUBMI7_N9005XSABMI1_XSA
Was preloaded JB 4.3 i forgot to save backup before i flashed.
I went to a KK 4.4 CM ROM straight out of the box.
I decided i wanted to revert to stock and play with the touchwiz features.
Strangely i flashed via odin the wrong firmware.
Pretty sure it was this one;
N9005XXUDML3_N9005IDEDML4_IDE
Which ended up being polish JB 4.3 (Orange)
And it worked.
=\
Forgetting my confusion about reverting from KK to JB,
After downloading aus firmware from sammobile,
Both the retail and telstra are failing with this message;
W REV. CHECK FAIL : fused : 2 . Binary : 1
Checked the forums but only found threads relevant to SGSIV.
Something about new OTA update blocking root.
Any help?
Oh and if possible id prefer stock retail to telstra branded.
Cheers.
Edit ; sorted, found them, Sammobile just takes abit of navigating.
Click to expand...
Click to collapse
Not sure whether you have found out already but there is NO going back to 4.3 courtesy of the Samsung d1cktatorship.

Related

Bell Rogers Telus SIM UNLOCK ?

The search function doesn't work very we'll on this site. I have been searching for days and can't find any method to SIM unlock a S4 from a CANADIAN carrier that's not a AT&T phone.
Does anyone know if its possible ?
Phone model: I337M
Fireware: 4.3
Anthony77777 said:
The search function doesn't work very we'll on this site. I have been searching for days and can't find any method to unlock a S4 from a CANADIAN carrier that's not a AT&T phone.
Does anyone know if its possible ?
Click to expand...
Click to collapse
15 seconds in google
http://forum.xda-developers.com/showthread.php?t=2282683&highlight=canadian
Should work but there are no promises
hednik said:
15 seconds in google
http://forum.xda-developers.com/showthread.php?t=2282683&highlight=canadian
Should work but there are no promises
Click to expand...
Click to collapse
This doesn't work for SGH-I337M.
Anthony77777 said:
This doesn't work for SGH-I337.
Click to expand...
Click to collapse
It does work. You have to use the search tool on the right side to search inside the thread.... people have used it on at&t phones. You need to be on 4.2.2 though.
If you are wary of this then pay for an unlock code
hednik said:
It does work. You have to use the search tool on the right side to search inside the thread.... people have used it on at&t phones. You need to be on 4.2.2 though.
If you are wary of this then pay for an unlock code
Click to expand...
Click to collapse
Bell doesn't have a 4.2.2 firmware for their S4 model (SGH-I337M). They were released with 4.3.
potter caaquie
So there is no current method developed to unlock a Bell, Rogers,Telus, Virgin and Koodo 4.3 SGH-I337M S4.
Am I correct XDA ?
Anthony77777 said:
The search function doesn't work very we'll on this site. I have been searching for days and can't find any method to unlock a S4 from a CANADIAN carrier that's not a AT&T phone.
Does anyone know if its possible ?
Click to expand...
Click to collapse
Kingo Root does. I used it on my Canadian model, which is an i377m btw, i377 is US model. Just download kingo root app, install to pc, attach the usb and click root. Be sure to allow any pop ups on device, and do NOT allow it to use the cfautoroot method (or odin mode), as that will trip knox. If it gets that far, just close out and run it again. I've had a few handsets take 2 attemps. You can install any custom recovery you want, and run any rom for i377m or international variant of the s4, just keep in mind flashing a custom recovery will trip knox. Kingo root itself, does NOT trip knox, mine is intact. i377m is a candian variant with an unlocked bootloader, i377 is the US version with a locked bootloader. Very different. mentioned due to you saying another method doesn't work on i377. well no, it doesn't, but if you're asking about a Canadian model, it's an i377m, and it will work.
I run 4.3 stock touchwiz, rooted, with wanam to fake official status, nova prime for the kitakat themed stuff.
azuziel said:
Kingo Root does. I used it on my Canadian model, which is an i377m btw, i377 is US model. Just download kingo root app, install to pc, attach the usb and click root. Be sure to allow any pop ups on device, and do NOT allow it to use the cfautoroot method (or odin mode), as that will trip knox. If it gets that far, just close out and run it again. I've had a few handsets take 2 attemps. You can install any custom recovery you want, and run any rom for i377m or international variant of the s4, just keep in mind flashing a custom recovery will trip knox. Kingo root itself, does NOT trip knox, mine is intact. i377m is a candian variant with an unlocked bootloader, i377 is the US version with a locked bootloader. Very different. mentioned due to you saying another method doesn't work on i377. well no, it doesn't, but if you're asking about a Canadian model, it's an i377m, and it will work.
I run 4.3 stock touchwiz, rooted, with wanam to fake official status, nova prime for the kitakat themed stuff.
Click to expand...
Click to collapse
I am talking about SIM unlock not boot unlock.
Anthony77777 said:
Bell doesn't have a 4.2.2 firmware for their S4 model (SGH-I337M). They were released with 4.3.
Click to expand...
Click to collapse
Sammobile has the 4.2 firmware for the Bell I337m (Canada (Bell Mobile) 2013 July 4.2.2 I337MVLUAMG1 I337MOYAAMG1).
My guess is the hidden menu unlock procedure will work after you flash that firmware. Alternatively if you can locate and flash just the MG1 modem it should give you access to the hidden menu. You can then reflash your current modem.
yriteri vows
muniz_ri said:
Sammobile has the 4.2 firmware for the Bell I337m (Canada (Bell Mobile) 2013 July 4.2.2 I337MVLUAMG1 I337MOYAAMG1).
My guess is the hidden menu unlock procedure will work after you flash that firmware. Alternatively if you can locate and flash just the MG1 modem it should give you access to the hidden menu. You can then reflash your current modem.
Click to expand...
Click to collapse
Odin 3.07 using pda & Rogers 4.2.2 (2013 April 337MVLUAMDJ) from sammobile on Rogers 4.3.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anthony77777 said:
Odin 3.07 using pda & Rogers 4.2.2 (2013 April 337MVLUAMDJ) from sammobile on Rogers 4.3.
Click to expand...
Click to collapse
What firmware did you start with? Re-flash that firmware to get back to stock and get your phone working again.
tandcia the
muniz_ri said:
What firmware did you start with? Re-flash that firmware to get back to stock and get your phone working again.
Click to expand...
Click to collapse
I started with I337MVLUEMK6 (Rogers 4.3). I was able to successfully restore with that firmware with oden.
So it seems i337m doesn't downgrade on 4.3. Is there a way I can flash the modem to get access to the menu ?
It's all about umts secret menu access.
Anthony77777 said:
I started with I337MVLUEMK6 (Rogers 4.3). I was able to successfully restore with that firmware with oden.
So it seems i337m don't downgrade. Is there a way I can flash the modem to get access to the menu ?
It's all about umts secret menu access.
Click to expand...
Click to collapse
There are lots of kiosks in malls that will do it for around $20.... unless you are actually trying to kill the phone... (kidding)
Anthony77777 said:
I started with I337MVLUEMK6 (Rogers 4.3). I was able to successfully restore with that firmware with oden.
So it seems i337m doesn't downgrade on 4.3. Is there a way I can flash the modem to get access to the menu ?
It's all about umts secret menu access.
Click to expand...
Click to collapse
It appears the Canadian models also have locked bootloaders which prevent you from downgrading the entire firmware.
I saw the MG1 4.2 modem in this thread: http://forum.xda-developers.com/showthread.php?t=2324667
Once you flash that it should give you access to the hidden menu. You can then re-flash the MK6 modem after you unlock (also in the above thread).
I have fido on 4.3 stock I337MVLUEMK6 rom. I tried to downgrade it to I337MVLUAMDJ using the Rogers (http://stockroms.net/file/GalaxyS4//SGH-I337M) to get the hidden service menu. I was able to get it downgrade and show the baseband and build version to : I337MVLUAMDJ using ODIN 3.09 and access the service menu(http://forum.xda-developers.com/showthread.php?t=2285431) to go through the steps and unlock the phone. However I got the invalid sim error and also the phone wifi and sound doesn't work
Any ideas how to get it work on the I337MVLUAMDJ firmware?
Thank
muniz_ri said:
It appears the Canadian models also have locked bootloaders which prevent you from downgrading the entire firmware.
I saw the MG1 4.2 modem in this thread: http://forum.xda-developers.com/showthread.php?t=2324667
Once you flash that it should give you access to the hidden menu. You can then re-flash the MK6 modem after you unlock (also in the above thread).
Click to expand...
Click to collapse
Canadian models do not have locked bootloaders. even knox doesnt lock it. which is why we can run custom recoveries and kernels. will trip knox, but it is *not* locked bootloader. I337m = unlocked
Sent from my SGH-I337M
traitimmapu said:
I have fido on 4.3 stock I337MVLUEMK6 rom. I tried to downgrade it to I337MVLUAMDJ using the Rogers (http://stockroms.net/file/GalaxyS4//SGH-I337M) to get the hidden service menu. I was able to get it downgrade and show the baseband and build version to : I337MVLUAMDJ using ODIN 3.09 and access the service menu(http://forum.xda-developers.com/showthread.php?t=2285431) to go through the steps and unlock the phone. However I got the invalid sim error and also the phone wifi and sound doesn't work
Any ideas how to get it work on the I337MVLUAMDJ firmware?
Thank
Click to expand...
Click to collapse
I also have a Canadian MK6 and downgraded it to MDJ and did everything in the hidden menu but still unable to unlock. After more searching I finally found a way to unlock mine. Check this out.

[Q] Note 3 UAE Firmware Updates

Hi Guys,
Im a new user here, but have been using the site for firmwares for ages. This place is awesome.
Can someone help me with this?
I recently got a note3 4G from UAE (Damam) to india. Its really awesome, except for the lack of firmware updates.
Hence, the fiddler in me thought i should just go ahead and try oin a new firmware.
Previously, i was 'fiddling' with the galaxy s3, which seemed easy enough, but with the Note3, there seems to be a massive divide between regions and firmware versions. I wouldn't want tot do anything that might take away features like the 2K video recording and what not.
I am also getting quite sick of the phone heating up because of some process using the camera (mm-camera-daemon).
Hence, i figured, it might have been fixed in the Kitkat update.
Can anyone direct me as to how i can go about finding the right firmware for my phone, and if i will still recieve OTA updates after an Odin flash (Possibly from another regions firmware).
Thanks a lot!
Keep up the great work!
No one? Really?
I am currently running the BTU NB7 Stock Rom from sammobile.com, this would give you region updates from btu, the uk.
Just flash it via odin the same as you would have done on your s3.
Edit: your device is the N9005, correct?
Also, if you update to Kitkat, you cannot downgrade back to JB.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N9005 using Tapatalk
Thank you very much celderic.
Finally some real answers. Much appreciated.
What are the differences between the various regions by the way? Is it only the language packs? Could you confirm if this update is safe for me, my AP right now ends with MJ7 (UAE).
Also, i've been reading some bad press about the new update. Would you recommend updating anyway? And will the camera still shoot at 2K?
Edit: Been reading a lot about knox. my warranty is already void, so do i need to worry about it? Also, what are the pros and cons of using a custom rom (like omega) and why arent you using them. I want to switch to 4.4 more so for the Ok Google wake up command - will work wonders in my car.
Thanks!!!!
raahilkulshreshtha said:
Thank you very much celderic.
Finally some real answers. Much appreciated.
What are the differences between the various regions by the way? Is it only the language packs? Could you confirm if this update is safe for me, my AP right now ends with MJ7 (UAE).
Also, i've been reading some bad press about the new update. Would you recommend updating anyway? And will the camera still shoot at 2K?
Edit: Been reading a lot about knox. my warranty is already void, so do i need to worry about it? Also, what are the pros and cons of using a custom rom (like omega) and why arent you using them. I want to switch to 4.4 more so for the Ok Google wake up command - will work wonders in my car.
Thanks!!!!
Click to expand...
Click to collapse
Aslong as you only flash official packages from samsung via odin, your knox will remain at 0x0, but as soon as you flash a custom recovery for example, it will go to 0x1 like mine has.
Yes the camera is fine at 4k, i rarely use it though thr file size is too big for me
The CSC code mainly determines where it will get the updates from, my phone was bought as a BTU device, when kitkat first came out i flashed the polish XEO firmware, no problems with it
I am using my own modified version of stock instead of other peoples work, i just didnt like the themes some of the other roms had, and i noticed lots of tiny bugs. Just little things that made me want to put together something for my own use. But ofcourse my phone is rooted and i have no warranty, knox 0x1
I hope this helps feel free to ask if you need any more information.
Edit: i didnt realise you said your knox is already void, i would suggest flashing the stock nb7 btu rom, or even nc2 of another region. To update the modem and bootloader, then flash the latest TWRP recovery, then flash alexndrs latest nc2 rom in recovery it is pre rooted. And when installing from recovery you can set your CSC during the install.
Sent from my SM-N9005 using Tapatalk
Ok, i get it. You seem very wise on these matters. And kudos on the modified ROM, i would love to do the same if i knew how.
Let me take you though the full story, and then you can advise me on what i should do.
I live in India. A friend of mine bought the note3 for me from the UAE (Damam). He was told that he would have to use it with a uae local sim card for a few days there to 'unlock' it, after which, he could use it anywhere (Seriously, is that the best you can do Samsung?). Anyway, he did so, and all worked perfectly. I am using it just fine (more than just fine, its awesome) here in India. Also, since i am not in the UAE, warranty is void. Thats why i mentioned the knox bit since it seems that it will makes no difference to my life.
Now, there are couple of things which are bugging me with the update.
1) Regional differences - what are the differences. Apart from the CSC, the PDA files also seem to be named differently. Why?
2) Is 4.4 really worth it (Since downgrading is an impossibility after that)? I've heard battery life issues and what not. Are you facing these issues as well? Currently, on 4.3, im not having any battery problems, but some process called mm-camera-daemon keeps heating up the camera area on the phone. I was considering buying a portable mini fire extinguisher a few weeks back, but then i thought i might look silly carrying it around I was also hoping that the "Ok Google" command works, but am not clear if samsung has allowed it over sVoice.
3) If i update, will my phone get Sim locked again?
4) Custom Roms - Will i be able to come back to the official roms later if required and recieve OTA updates?
5) Modem and bootloader - I am in india anyway, so the existing modem doesnt apply to me anyway (even though it works). Still fine?
Thanks again!
there is not any update available for your region ( Dubai )
you can use another region
Also, how do i backup the efs without rooting it first? or is it safe for me to just go ahead with a odin update to official 4.4.2?
EDIT:
Alright! Just to keep you updated, i did it!
used the UK BTU firmware you provided and flashed with odin, whilst holding tightly onto my chair.
Booted up, android is upgrading nonsense... etc etc.All working fine.
However, the "Ok Google" command doesnt work, i've read up everywhere about what to do, but nothing i do will make it work, works when the screen is on the lockscreen though.
Anyway, SVoice is going to end samsung one day.
Is there any point in shifting to a custom rom now? Or am i good with just rooting (will i still get updates)?
raahilkulshreshtha said:
Ok, i get it. You seem very wise on these matters. And kudos on the modified ROM, i would love to do the same if i knew how.
Let me take you though the full story, and then you can advise me on what i should do.
I live in India. A friend of mine bought the note3 for me from the UAE (Damam). He was told that he would have to use it with a uae local sim card for a few days there to 'unlock' it, after which, he could use it anywhere (Seriously, is that the best you can do Samsung?). Anyway, he did so, and all worked perfectly. I am using it just fine (more than just fine, its awesome) here in India. Also, since i am not in the UAE, warranty is void. Thats why i mentioned the knox bit since it seems that it will makes no difference to my life.
Now, there are couple of things which are bugging me with the update.
1) Regional differences - what are the differences. Apart from the CSC, the PDA files also seem to be named differently. Why?
2) Is 4.4 really worth it (Since downgrading is an impossibility after that)? I've heard battery life issues and what not. Are you facing these issues as well? Currently, on 4.3, im not having any battery problems, but some process called mm-camera-daemon keeps heating up the camera area on the phone. I was considering buying a portable mini fire extinguisher a few weeks back, but then i thought i might look silly carrying it around I was also hoping that the "Ok Google" command works, but am not clear if samsung has allowed it over sVoice.
3) If i update, will my phone get Sim locked again?
4) Custom Roms - Will i be able to come back to the official roms later if required and recieve OTA updates?
5) Modem and bootloader - I am in india anyway, so the existing modem doesnt apply to me anyway (even though it works). Still fine?
Thanks again!
Click to expand...
Click to collapse
1) There is a region unlock app by chainfire, you need to be rooted though.
2) I am having a very good experience using 4.4 also if i am not mistaken the mm-camera-daemon raises the cou frequency when using the camera, i did see a fix posted online recently that will be included in the next update from google, after 4.4
3/4) To get back to an official rom all you have to do is flash the package via odin. For sim locking, see the app by chainfire.
5)as you are on JB currently it will work on other JB firmwares, im not shre if it will work on KK though i have never tried. Just updated and never had to go back.
raahilkulshreshtha said:
Also, how do i backup the efs without rooting it first? or is it safe for me to just go ahead with a odin update to official 4.4.2?
EDIT:
Alright! Just to keep you updated, i did it!
used the UK BTU firmware you provided and flashed with odin, whilst holding tightly onto my chair.
Booted up, android is upgrading nonsense... etc etc.All working fine.
However, the "Ok Google" command doesnt work, i've read up everywhere about what to do, but nothing i do will make it work, works when the screen is on the lockscreen though.
Anyway, SVoice is going to end samsung one day.
Is there any point in shifting to a custom rom now? Or am i good with just rooting (will i still get updates)?
Click to expand...
Click to collapse
If there are certain apps you would like to remove from the system partition i would suggest alexndrs rom as it has everything you have currently.
Also the TWRP 2.7 recovery is working well for me. You will need to flash that in odin to install the other rom on your phone, same button combo to get to recovery and download mode as your s3 was.
As for efs backups i found a good aroma script, let me find it i will edit when when i have it.
Edit: You will meed TWRP Recovery for this, your knox will go to 0x1 as mine has from flashing the recovery though, just make sure you want too. But here is what you need to flash in TWRP and follow the onscreen instructions to backup the efs for your n9005, backup is about 14mb when finished i think, so make sure. I uploaded it because i couldnt find the thread - http://uppit.com/y9fwqktntlei/EFS_Backup_restore_Aroma.zip
Edit: i hope i have answered everything you asked, sort of rushing to cook dinner whilst typing this found the thread for the aroma efs backup tool too - http://forum.xda-developers.com/showthread.php?t=2611903
Sent from my SM-N9005 using Tapatalk
celderic said:
1) There is a region unlock app by chainfire, you need to be rooted though.
2) I am having a very good experience using 4.4 also if i am not mistaken the mm-camera-daemon raises the cou frequency when using the camera, i did see a fix posted online recently that will be included in the next update from google, after 4.4
3/4) To get back to an official rom all you have to do is flash the package via odin. For sim locking, see the app by chainfire.
5)as you are on JB currently it will work on other JB firmwares, im not shre if it will work on KK though i have never tried. Just updated and never had to go back.
If there are certain apps you would like to remove from the system partition i would suggest alexndrs rom as it has everything you have currently.
Also the TWRP 2.7 recovery is working well for me. You will need to flash that in odin to install the other rom on your phone, same button combo to get to recovery and download mode as your s3 was.
As for efs backups i found a good aroma script, let me find it i will edit when when i have it.
Edit: You will meed TWRP Recovery for this, your knox will go to 0x1 as mine has from flashing the recovery though, just make sure you want too. But here is what you need to flash in TWRP and follow the onscreen instructions to backup the efs for your n9005, backup is about 14mb when finished i think, so make sure. I uploaded it because i couldnt find the thread - http://uppit.com/y9fwqktntlei/EFS_Backup_restore_Aroma.zip
Edit: i hope i have answered everything you asked, sort of rushing to cook dinner whilst typing this found the thread for the aroma efs backup tool too - http://forum.xda-developers.com/showthread.php?t=2611903
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Wow. You are a GOD!
Cant remember the last time someone put time out to help out like this.
All seems well, and im all set to flash TWRP.
Once question though, is it possible that the UK modem is causing connectivity losses here in india? I seem to be loosing my network (have network issues at my workplace, but not sure if this is because of the new modem. Maybe its psychosomatic.) If so, should i flash some other regions firmware before the final alexandr rom?
xdaAdmin - The thanks button disappeared on clicking it once. Please fix this 'bug' to allow upto 100 thanks.
Edit: I installed alexndr rom!!!! Dont see much difference though. How do i make ok google work while the phone is off?
Alright! 3 hours with the new firmware. Everything works. I even managed to uninstall SVoice. But 2 things:
1) Ok Google command is still not working. Do i need a different ROM where samsung apps are not included?
2) The EFS tool you mentioned : Does it do anything different from the TWRP efs backup option?
Also, have you tried http://forum.xda-developers.com/showthread.php?t=2472301
Thanks mate!
raahilkulshreshtha said:
Wow. You are a GOD!
Cant remember the last time someone put time out to help out like this.
All seems well, and im all set to flash TWRP.
Once question though, is it possible that the UK modem is causing connectivity losses here in india? I seem to be loosing my network (have network issues at my workplace, but not sure if this is because of the new modem. Maybe its psychosomatic.) If so, should i flash some other regions firmware before the final alexandr rom?
xdaAdmin - The thanks button disappeared on clicking it once. Please fix this 'bug' to allow upto 100 thanks.
Edit: I installed alexndr rom!!!! Dont see much difference though. How do i make ok google work while the phone is off?
Click to expand...
Click to collapse
Anytime other people may find this thread useful. Just sharing what i have learnt from this device, i have owned it since christmas.
In the alexndr thread, did you flash the latest nc2 modem via odin? You will have to shut down your phone, do the button combo for download mode then flash it, it is in the first post of his thread, this may help. Also the bootloader if you havent (i dont think this needs to be updated, but i have anyway) flash the modem and bootloader seperately
I will try and look up the ok google command, i have never used it. I try to use just the essentials for best battery life and speed
raahilkulshreshtha said:
Alright! 3 hours with the new firmware. Everything works. I even managed to uninstall SVoice. But 2 things:
1) Ok Google command is still not working. Do i need a different ROM where samsung apps are not included?
2) The EFS tool you mentioned : Does it do anything different from the TWRP efs backup option?
Also, have you tried http://forum.xda-developers.com/showthread.php?t=2472301
Thanks mate!
Click to expand...
Click to collapse
The reason i gave you that to flash in recovery is because i have had problems restoring backups in twrp, apparently there is an update coming soon to fix this, but better to be safe and have 2. Put them on your pc or somewhere safe.
I did use the last version of x-note a few weeks ago(been updated since) but i did not like it, too many features that are useless for my daily usage. I think other users favour that rom though.
Sent from my SM-N9005 using Tapatalk
celderic said:
Anytime other people may find this thread useful. Just sharing what i have learnt from this device, i have owned it since christmas.
In the alexndr thread, did you flash the latest nc2 modem via odin? You will have to shut down your phone, do the button combo for download mode then flash it, it is in the first post of his thread, this may help. Also the bootloader if you havent (i dont think this needs to be updated, but i have anyway) flash the modem and bootloader seperately
I will try and look up the ok google command, i have never used it. I try to use just the essentials for best battery life and speed
The reason i gave you that to flash in recovery is because i have had problems restoring backups in twrp, apparently there is an update coming soon to fix this, but better to be safe and have 2. Put them on your pc or somewhere safe.
I did use the last version of x-note a few weeks ago(been updated since) but i did not like it, too many features that are useless for my daily usage. I think other users favour that rom though.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
The NC2 modem and bootloader is in the UK BTU Official update right? Yup, i did that.
Also, apparently, since there is a core on the phone dedicated to system services, the Ok Google command doesnt take much juice to run. Its quite neat. Svoice apparently does eat up quite a lot of battery, but then again, thats what you get when you name something 'Svoice'... Seems like they are trying very hard to piss off apple.
You should try the Google Experience System (or whatever its called). I was using it on the s3 inside my car/for alarms with voice commands. Quite convenient and accurate (even with our indian names to call here) and i havent really faced any issues with a false startup till now on the s3.
Will do the efs thing tomorrow. Thanks for the warning on TRWP.
Would you know of any other ROM which completely boycotts samsungs propitiatory apps?
Will flashing official firmware of another country void my warranty
hi I have a n900 from Dubai, and have flashed KSA csc firmware. My KNOX is 0x0. will it be serviced for problems if I send it to Dubai. I have lost my iemi and baseband.
Can I get official update of lollipop on manually installed kitkat?
I have Note 3. I have manually installed Lollipop. Now it restarts automatically once or twice a day. How i can i Solve this problem?
I was thinking of to downgrade back to kitkat, but will i get official update of lollipop on the manually installed kitkat?
Thanks

SM-N9005 International Note 3 4.4.2

Hey guys.
Got an N9005 and just getting really impatient waiting for the Australian XSA rom to be released. It's so close I'm sure but, was wondering if I could perhaps flash a Poland firmware for now then flash an Australian one when it's released with no problems?
In my knowledge, a few years of flashing roms etc, it seems this would update everything including my bootloader, which is fine. Heard also that you cannot go back to any previous version of android after this procedure. Which I find weird, as what if I flashed a 4.3 firmware, wouldn't this revert everything back? Including bootloader?
Anyway, not that I'd want to go back, that was more just to see what the final say was.
Moving on, so I should be able to flash a Poland room for example then update to Australian? As they are official firmware, I shouldn't trip Knox either?
Thanks heaps in advance guys.
Anyone??
Thanks!!
Lambetts said:
Hey guys.
Got an N9005 and just getting really impatient waiting for the Australian XSA rom to be released. It's so close I'm sure but, was wondering if I could perhaps flash a Poland firmware for now then flash an Australian one when it's released with no problems?
In my knowledge, a few years of flashing roms etc, it seems this would update everything including my bootloader, which is fine. Heard also that you cannot go back to any previous version of android after this procedure. Which I find weird, as what if I flashed a 4.3 firmware, wouldn't this revert everything back? Including bootloader?
Anyway, not that I'd want to go back, that was more just to see what the final say was.
Moving on, so I should be able to flash a Poland room for example then update to Australian? As they are official firmware, I shouldn't trip Knox either?
Thanks heaps in advance guys.
Click to expand...
Click to collapse
You can flash the Poland firmware while you wait. Almost everybody ran Poland Kitkat when it was first released.
The updated bootloader prevent from downgrading. If you try to do it via odin, the update will fail.
Official firmwares from any region will not trip KNOX.
Lambetts said:
Hey guys.
Got an N9005 and just getting really impatient waiting for the Australian XSA rom to be released. It's so close I'm sure but, was wondering if I could perhaps flash a Poland firmware for now then flash an Australian one when it's released with no problems?
In my knowledge, a few years of flashing roms etc, it seems this would update everything including my bootloader, which is fine. Heard also that you cannot go back to any previous version of android after this procedure. Which I find weird, as what if I flashed a 4.3 firmware, wouldn't this revert everything back? Including bootloader?
Anyway, not that I'd want to go back, that was more just to see what the final say was.
Moving on, so I should be able to flash a Poland room for example then update to Australian? As they are official firmware, I shouldn't trip Knox either?
Thanks heaps in advance guys.
Click to expand...
Click to collapse
How did you go with this???? I am having same problem.. I flashed my stock optus note3 to polish 4.42 and now sim won't work any suggestions?
lucidpromise said:
How did you go with this???? I am having same problem.. I flashed my stock optus note3 to polish 4.42 and now sim won't work any suggestions?
Click to expand...
Click to collapse
AFAIK Optus Note 3 is N9007, not N9005. So may be this is your problem?
vndnguyen said:
AFAIK Optus Note 3 is N9007, not N9005. So may be this is your problem?
Click to expand...
Click to collapse
Are you sure?! Under the battery it says n9005......
lucidpromise said:
Are you sure?! Under the battery it says n9005......
Click to expand...
Click to collapse
Ohh sorry, I mean there is a separate model for Optus operator.
In fact there is N9005 that has CSC code is OPS for Optus, and there is N9007 specific for Optus.
May be you have the 1st one.
You can get your Model and CSC code by using Phone INFO ★Samsung★ app.

[ROOT KERNEL FOR TowelRoot] Tab Pro 8.4, 10.1

As you may be aware, GeoHotz has created an app to root an android device using a recently discovered exploit.
I tried it on my LTE Tab Pro 8.4 which had the latest firmware for my region "BTU" which is NB7,
It wouldn't work, but another XDA member @Inuit, said it worked for him with the DBT NE5 firmware he has on his device.
SO! I downloaded the DBT NE5 file, extracted the Kernel and repackaged it and flashed the Kernel on it's own. Then tried the root method.
I have now successfully rooted the device and kept Knox at a cool 0x0.
I chose to do things this way, as I wanted to keep my regions firmware and not that of another county.
So I still have my original firmware, but I am now using the newer Kernel, everything seems to be working fine but considering I only did this 15 minutes ago, I haven't had enough time to test. But connectivity is fine, battery levels fine etc...
UPDATE: Everything is fine for me, loaded Xposed modules, no adverse affects at all
I have attached the repackaged Kernel, all you need to do, is go into download mode and flash the file under the "AP" Tab in Odin 3.09.
Then install the TowelRoot app, which you can get from the links in the thread below:
http://forum.xda-developers.com/showthread.php?t=2783157
Install the latest, SuperSU (again links in the above thread).
You should be rooted and Knox kept at a cool 0x0.
I have tested the this on my Device the T325 and another user tested the Kernel for the Wi-Fi version T320 and are working fine But!
You try at your own risk!
Download links below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TR Rootable Kernel for LTE 8.4 SM-T325
Original NG1 Kernel for LTE 8.4 SM-T325
TR Rootable Kernel for Wi-Fi Only 8.4 SM-T320
Original NG1 Kernel for Wifi Only 8.4 SM-T320
TR Rootable Kernel for SM-T525 10.1 LTE SM-T525
RavenY2K3 said:
As you may be aware, GeoHotz has created an app to root an android device using a recently discovered exploit.
I tried it on my LTE Tab Pro 8.4 which had the latest firmware for my region "BTU" which is NB7,
It wouldn't work, but another XDA member @Inuit, said it worked for him with the DBT NE5 firmware he has on his device.
SO! I downloaded the DBT NE5 file, extracted the Kernel and repackaged it and flashed the Kernel on it's own. Then tried the root method.
I have now successfully rooted the device and kept Knox at a cool 0x0.
I chose to do things this way, as I wanted to keep my regions firmware and not that of another county.
So I still have my original firmware, but I am now using the newer Kernel, everything seems to be working fine but considering I only did this 15 minutes ago, I haven't had enough time to test. But connectivity is fine, battery levels fine etc...
I have attached the repackaged Kernel, all you need to do, is go into download mode and flash the file under the "AP" Tab in Odin 3.09.
Then install the TowelRoot app, which you can get from the links in the thread below:
http://forum.xda-developers.com/showthread.php?t=2783157
Install the latest, SuperSU (again links in the above thread).
You should be rooted and Knox kept at a cool 0x0.
Remember: My device and these files are for the SM-T325. You try at your own risk!
Click to expand...
Click to collapse
good trick
Hi RavenY2K3,
Thanks for your guide. May I know if Knox will be triggered if I install your attached Kernel via Odin?
@spectro_axis
As you can see in the screenshot, mine has not tripped, neither has anyone else's that I'm aware of on ANY Knox enabled device. What tab have you got?
Sent from my SM-N9005 using Tapatalk
RavenY2K3 said:
@spectro_axis
As you can see in the screenshot, mine has not tripped, neither has anyone else's that I'm aware of on ANY Knox enabled device. What tab have you got?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Hi RavenY2K3,
Thanks for your prompt reply. I currently own a Tab pro 8.4 LTE. I am actually thinking of updating my Tab pro with the latest T325 Firmware from Germany via odin. I am currently on the firmware from Singapore ,2014 March, 4.4.2, T325XXU1ANBB. Do you know whether will knox be tripped if i flash the Germany firmware over the current Singapore firmware? Thanks for your assistance.
spectro_axis said:
Hi RavenY2K3,
Thanks for your prompt reply. I currently own a Tab pro 8.4 LTE. I am actually thinking of updating my Tab pro with the latest T325 Firmware from Germany via odin. I am currently on the firmware from Singapore ,2014 March, 4.4.2, T325XXU1ANBB. Do you know whether will knox be tripped if i flash the Germany firmware over the current Singapore firmware? Thanks for your assistance.
Click to expand...
Click to collapse
My Tab came from China going by the firmware that came with mine out of the box and I replaced it with the UK BTU firmware no problems, you have to wipe the device etc for the CSC to apply though.
Pretty certain you can get difficulties if the new ROM is older than the one installed, if it's number is greater than or equal to the currently installed firmware you should be fine.
All the above is for official firmware though, not custom creations.
Sent from my SM-N9005 using Tapatalk
SM-T320 With T320XXU1ANAI from Peru
I want to confirm that using the kernel posted in this thread I was able to root the Galaxy Tab Pro 8.4 using [TR] with the stock firmware T320XXU1ANAI
Of course Knox flag was not tripped.
Thanks!
I already have 0x1. It is to return KNOX 0x0? It goes?
dansafe said:
I already have 0x1. It is to return KNOX 0x0? It goes?
Click to expand...
Click to collapse
No, once it's been triggered, that's it no going back. Unless someone figures out how to crack it.
Sent from my SM-N9005 using Tapatalk
one question left: what about an official OTA after flashing this modified kernel? will it work as it should?
Wysłane z mojego SM-T320 przy użyciu Tapatalka
macioh said:
one question left: what about an official OTA after flashing this modified kernel? will it work as it should?
Wysłane z mojego SM-T320 przy użyciu Tapatalka
Click to expand...
Click to collapse
It's not modified, it's a stock kernel from an exploitable firmware, for those who don't have an exploitable firmware for their respective region. As I mentioned, the latest version available for UK, is a step behind the German version, the UK version will be the same as the German one "at some point" in the future, but why wait when it can be done now.
Sent from my SM-T325 using Tapatalk
Someone successfully tested T520-kernel? I tried, but failed
Gesendet von meinem SM-T520
Hey can OP or anyone else upload the SM-T320 kernel to another site that doesn't require registration to download?
Thanks!
Edit: I guess Mega requires registration if you are trying to DL via a mobile device but you don't have to in order to DL via a PC.
Uploading for the benefit of others who are trying to DL via their tablets.
dansafe said:
I already have 0x1. It is to return KNOX 0x0? It goes?
Click to expand...
Click to collapse
no.
some discussions long ago suggest knox may used a technology called eFUSE, originally invented by IBM.
once knox detects a tampered bootloader, it will "blow" a micro-fuse in chip. then we see the warranty bit set to 1.
this is a physical-level change, so no way can revert it.
Lin Gi said:
Someone successfully tested T520-kernel? I tried, but failed
Gesendet von meinem SM-T520
Click to expand...
Click to collapse
Yes doesnt work for me either.
RavenY2K3 said:
My Tab came from China going by the firmware that came with mine out of the box and I replaced it with the UK BTU firmware no problems, you have to wipe the device etc for the CSC to apply though.
Pretty certain you can get difficulties if the new ROM is older than the one installed, if it's number is greater than or equal to the currently installed firmware you should be fine.
All the above is for official firmware though, not custom creations.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Hi, sorry noob question.
I have SM T325 with Hong Kong firmware originally. If I want to flash another firmware from a different country via Odin, will it trip the Knox? You said yours was Chinese firmware and you flashed a British one and it didn't trip the Knox, but I just wanted to confirm it. Also, after I flash the different firmware and I flash the root kernel, it won't trip Knox right? Sorry for repeating your words, just wanted to make sure, thanks
Zakanam said:
Hi, sorry noob question.
I have SM T325 with Hong Kong firmware originally. If I want to flash another firmware from a different country via Odin, will it trip the Knox? You said yours was Chinese firmware and you flashed a British one and it didn't trip the Knox, but I just wanted to confirm it. Also, after I flash the different firmware and I flash the root kernel, it won't trip Knox right? Sorry for repeating your words, just wanted to make sure, thanks
Click to expand...
Click to collapse
flashing official firmware from different region won't trigger knox, only rooting and installing custom recovery will.
SMT520 was kernel jan14 flashed his kernel apr3
used towelrootv2 and don't have root access
on build anae fwiw
it also seems to know something is up because now i get a notification that tells me there was suspicious activity on my tablet and to reboot to make changes. rebooted and still get the notification so i assume it's just trying to revert. at this point i dont feel the need to flash stock recovery i'm sure a reliable, working root method will be there sooner than later.
on further reading it just appears that any exynos processor tablet wont be able to take advantage of towelroot until geo decides to open support. makes sense the 8.4 (wifi/lte) versions as well as all the qualcomm LTE versions of the tab pro/note lines are working.
jason_jiang said:
flashing official firmware from different region won't trigger knox, only rooting and installing custom recovery will.
Click to expand...
Click to collapse
Not true it can trigger Knox. I found out the hard way on my European 8.4 flashing a US ROM. It didn't flash properly (ext4) error and then I had to restore with kies.
Sent from my Nexus 5 using Tapatalk
Can confirm it works on Tab Pro 8.4. I didn't have to mess about with flashing different Kernel for some reason. Below is the firmware that was on my device.
Device: Galaxy Tab Pro 8.4 WiFi Only (SM-T320)
Region: UK
Version: T320XXU1BNE3
Build Date: 2014/5/27
After installing towelroot V2 I just pressed the button on the app and let it do it's magic and then installed SuperSU/Pro. And that was it. All rooted and it didn't trip the Knox flag. Now titanium backup and similar root like apps work. Brilliant. Well pleased

[Q] Flashing a SM-G900AZ Galaxy S5 from Cricket Wireless

Can it be done? I want to flash to Samsung stock firmware so that tethering back in the phone's firmware. I rooted the phone with Towel Root successfully.
If this can be done, what firmware works? Any custom ROMS available that work and have been tested on this model? I am currently downloading SM-G900AZ_NA_KK_Opensource.zip from Opensource.samsung.com. Is this a stock firmware or just source code? Otherwise, would the AT&T stock firmware work from the GalaxyS5Root website?
Same question...
mlrosier6179 said:
Can it be done? I want to flash to Samsung stock firmware so that tethering back in the phone's firmware. I rooted the phone with Towel Root successfully.
If this can be done, what firmware works? Any custom ROMS available that work and have been tested on this model? I am currently downloading SM-G900AZ_NA_KK_Opensource.zip from Opensource.samsung.com. Is this a stock firmware or just source code? Otherwise, would the AT&T stock firmware work from the GalaxyS5Root website?
Click to expand...
Click to collapse
I have the same phone and have been on the hunt for months now for a rom for this phone. I did read somewhere that the at&t and the cricket rom are one in the same, just cricked rebranded it and changed a few letters at the end of the model number. I did give that at&t rom a shot but didn't get far. I was able to install Safestrap 3.75 (TWRP v2.7.1.0) Recovery and do a back up of my current stock rom, rooted the same way you did yours, and wiped my system and tried pushing that at&t rom on the s5 but it failed. I did a restore and everything was back to normal 100%. So, this is a working recovery but I haven't found that magical cricket rom yet. I'm in the same boat with the tethering thing and it sucks... It's also my understanding that cricket is now at&t just rebranded so the at&t rom should work but i'm not sure.
Same...
poweruser1975 said:
I have the same phone and have been on the hunt for months now for a rom for this phone. I did read somewhere that the at&t and the cricket rom are one in the same, just cricked rebranded it and changed a few letters at the end of the model number. I did give that at&t rom a shot but didn't get far. I was able to install Safestrap 3.75 (TWRP v2.7.1.0) Recovery and do a back up of my current stock rom, rooted the same way you did yours, and wiped my system and tried pushing that at&t rom on the s5 but it failed. I did a restore and everything was back to normal 100%. So, this is a working recovery but I haven't found that magical cricket rom yet. I'm in the same boat with the tethering thing and it sucks... It's also my understanding that cricket is now at&t just rebranded so the at&t rom should work but i'm not sure.
Click to expand...
Click to collapse
Update:
I tried installing cm11 that is supposed to be able to be installed on all s5's and it failed out saying this rom is not for "klteaio" and it gave a read out for the one's it is for and the names were similar like "klteuh" "kltetew" "kitewvd" those are just examples cause i don't remember the names but i do remember them being in the structure of "K LTE AIO" K probably for kitkat and LTE for the s5 band and the AIO is probably the identifier cause the aio was the only difference in the name. I'm looking into adding the klteaio string into the cm11 zip file somewhere.
poweruser1975 said:
Update:
I tried installing cm11 that is supposed to be able to be installed on all s5's and it failed out saying this rom is not for "klteaio" and it gave a read out for the one's it is for and the names were similar like "klteuh" "kltetew" "kitewvd" those are just examples cause i don't remember the names but i do remember them being in the structure of "K LTE AIO" K probably for kitkat and LTE for the s5 band and the AIO is probably the identifier cause the aio was the only difference in the name. I'm looking into adding the klteaio string into the cm11 zip file somewhere.
Click to expand...
Click to collapse
any luck in getting a custom rom for the cricket s5?:laugh:
no luck...
Nothing yet...
Hey guys any ROM for att s5 will work on our phone as long as its tw-based. I'm almost positive our boot loader is locked(would love to find out otherwise) so any custom kernel or aosp-based ROM will NOT work..
I am running dynamic Kat v4.0,the Dev just put it out yesterday and it has a appealing theme as well as tons of customization options, probably the next best thing behind actual aosp. Find the ROM in the regular development section of the att s5 subforum.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG]
[/IMG]
Make sure you flash it on the stock ROM slot, and re-wipe cache&dalvik after flashing the ROM+GPE theme (you'll find it in the thread)
mlrosier6179 said:
Can it be done? I want to flash to Samsung stock firmware so that tethering back in the phone's firmware. I rooted the phone with Towel Root successfully.
If this can be done, what firmware works? Any custom ROMS available that work and have been tested on this model? I am currently downloading SM-G900AZ_NA_KK_Opensource.zip from Opensource.samsung.com. Is this a stock firmware or just source code? Otherwise, would the AT&T stock firmware work from the GalaxyS5Root website?
Click to expand...
Click to collapse
Have you tried installing this APK?
https://code.google.com/p/android-wifi-tether/
Also where did you get towelroot that works? From here https://towelroot.com/ ?
I'm answering my own question for other cricket S5 users:
Towelroot works.
I have not tried any custom roms I doubt any will work but on my older S4 the Golden eye room made it so much faster so I'm hoping someone can confirm that works.
Still not able to get tether. I have installed X Tether module under Xposed but no luck. There is no tethering to enable.
Installed Greenify and hybernated several apps now its much faster.
Sent from my SAMSUNG-SM-G900AZ using XDA Free mobile app
brooklynite said:
I'm answering my own question for other cricket S5 users:
Towelroot works.
I have not tried any custom roms I doubt any will work but on my older S4 the Golden eye room made it so much faster so I'm hoping someone can confirm that works.
Still not able to get tether. I have installed X Tether module under Xposed but no luck. There is no tethering to enable.
Installed Greenify and hybernated several apps now its much faster.
Sent from my SAMSUNG-SM-G900AZ using XDA Free mobile app
Click to expand...
Click to collapse
It's always a good idea to read a bit so as to avoid putting out misinformation,
EDIT:
http://forum.xda-developers.com/showthread.php?t=3031951
G900az-- bootloader is unlocked!!!
Swimguy14 said:
It's always a good idea to read a bit so as to avoid putting out misinformation,
EDIT:
http://forum.xda-developers.com/showthread.php?t=3031951
G900az-- bootloader is unlocked!!!
Click to expand...
Click to collapse
Not sure which part was "misinformation".
I still cant tether on the Cricket ROM. I am not interested in other ROMs. I just want to find the darn shortcut to the tethering module in the stock ROM. I have a feeling Cricket only removed the shortcut from the settings menu, not the entire module from the ROM.
I even tried this:
http://forum.xda-developers.com/moto-x/themes-apps/app-hotspot-entitlement-bypass-v1-1-5-9-t2705152
but it didn't work, it says it failed to execute command.
Has anyone tried flashing stock Cricket firmware onto a stock Att branded S5? I'm about to tinker with my ladies S5 since she upgraded to the S6. I would think it can be done since its possible to flash Metro PCS onto a Tmo phone. Thoughts?
mlrosier6179 said:
Can it be done? I want to flash to Samsung stock firmware so that tethering back in the phone's firmware. I rooted the phone with Towel Root successfully.
If this can be done, what firmware works? Any custom ROMS available that work and have been tested on this model? I am currently downloading SM-G900AZ_NA_KK_Opensource.zip from Opensource.samsung.com. Is this a stock firmware or just source code? Otherwise, would the AT&T stock firmware work from the GalaxyS5Root website?
Click to expand...
Click to collapse
easy thether app works well , it also has a Bluetooth option to thether and it works greate.. im using it right now
I was able to do it
mlrosier6179 said:
Can it be done? I want to flash to Samsung stock firmware so that tethering back in the phone's firmware. I rooted the phone with Towel Root successfully.
If this can be done, what firmware works? Any custom ROMS available that work and have been tested on this model? I am currently downloading SM-G900AZ_NA_KK_Opensource.zip from Opensource.samsung.com. Is this a stock firmware or just source code? Otherwise, would the AT&T stock firmware work from the GalaxyS5Root website?
Click to expand...
Click to collapse
So I found the att Stock Rom . After that i found this site thx to the site i was able to eliminate the checking for tether account from att software. I cant post the site completely so subsitude the >>> for .com
highonandroid.>>> /android-apps/how-to-get-free-wifi-tether-on-rooted-android-att-t-mobile-sprint-verizon
If you just install the latest official cricket rom, (lollipop/released a few weeks ago) the tethering feature is built in /enabled by default, just go into settings and turn it on.
Phobic47 said:
So I found the att Stock Rom . After that i found this site thx to the site i was able to eliminate the checking for tether account from att software. I cant post the site completely so subsitude the >>> for .com
highonandroid.>>> /android-apps/how-to-get-free-wifi-tether-on-rooted-android-att-t-mobile-sprint-verizon
Click to expand...
Click to collapse
mlrosier6179 said:
Can it be done? I want to flash to Samsung stock firmware so that tethering back in the phone's firmware. I rooted the phone with Towel Root successfully.
If this can be done, what firmware works? Any custom ROMS available that work and have been tested on this model? I am currently downloading SM-G900AZ_NA_KK_Opensource.zip from Opensource.samsung.com. Is this a stock firmware or just source code? Otherwise, would the AT&T stock firmware work from the GalaxyS5Root website?
Click to expand...
Click to collapse
sent from my sm-g900az (cricket) using CRAPatalk
Bought SM-G900AZ with latest lollipop cricket rom, want downgrade (to 4.4.2) for rooting.
Trying with Odin official 4.4.2 rom from Sammobile. Got error fused 2 binary 1.
Any help appreciated.
So, like an idiot, I updated to the latest OG3 lollipop on my G900AZ, thinking that I could still root. And I thought I had read everything pertaining to this. Towelroot did not work for the update. Anyone know of a way to root lollipop OG3? or is there a way to downgrade back to what I had with Odin, which was KitKat NK2? Any help would be awesome!
UPDATE: I followed the instructions in this post to get root on OG3
http://forum.xda-developers.com/gal...r-unlocked-t3031951/post61885097#post61885097
raydantheman said:
So, like an idiot, I updated to the latest OG3 lollipop on my G900AZ, thinking that I could still root. And I thought I had read everything pertaining to this. Towelroot did not work for the update. Anyone know of a way to root lollipop OG3? or is there a way to downgrade back to what I had with Odin, which was KitKat NK2? Any help would be awesome!
UPDATE: I followed the instructions in this post to get root on OG3
http://forum.xda-developers.com/gal...r-unlocked-t3031951/post61885097#post61885097
Click to expand...
Click to collapse
Is the bootloader still unlocked on BOE2 and BOG3? I still haven't updated from ANE7, as I've been running custom ROMs.
scrawnyb said:
Is the bootloader still unlocked on BOE2 and BOG3? I still haven't updated from ANE7, as I've been running custom ROMs.
Click to expand...
Click to collapse
I'm not sure because I'm running AllianceRom v10 which I believe is TouchWiz. I'm somewhat of a moderate noob here. How would I find out if the bootloader is unlocked?
raydantheman said:
I'm not sure because I'm running AllianceRom v10 which I believe is TouchWiz. I'm somewhat of a moderate noob here. How would I find out if the bootloader is unlocked?
Click to expand...
Click to collapse
Unlocked bootloader allows you to flash custom ROMs, including those with different kernels. I ended up flashing BOG3 out of desperation to recover my device, so I confirmed/answered my own question. As of BOG3, the Cricket S5 (SM-G900AZ) is still bootloader-unlocked.
scrawnyb said:
Unlocked bootloader allows you to flash custom ROMs, including those with different kernels. I ended up flashing BOG3 out of desperation to recover my device, so I confirmed/answered my own question. As of BOG3, the Cricket S5 (SM-G900AZ) is still bootloader-unlocked.
Click to expand...
Click to collapse
Have you already flashed any custom ROMs for BOG3 on this phone? If so, which one do you think is the best and most stable? I might consider trying one if there aren't any major bugs.

Categories

Resources