Related
is there anyway to install CWM on ICS galaxy tab10.1 3G (P7500) without ODIN
my tab not connect to my pc so that odin can't see it ( i tried every way in XDA to connect it to my pc )
I have all the correct drivers installed. i have Galaxy SII and it's work fine
olso i try Mobile Odin but no luck.
it's need root and root need CWM
any help
i would be Grateful
khad96 said:
is there anyway to install CWM on ICS galaxy tab10.1 3G (P7500) without ODIN
my tab not connect to my pc so that odin can't see it ( i tried every way in XDA to connect it to my pc )
I have all the correct drivers installed. i have Galaxy SII and it's work fine
olso i try Mobile Odin but no luck.
it's need root and root need CWM
any help
i would be Grateful
Click to expand...
Click to collapse
No root Doesn't need cwm, install the root files from the stock recovery then using the rom manager from market install the CWM. BTW mobile odin needs root so it won't work with you Untill you root
Sent from my GT-P7500 using xda app-developers app
I believed Stock ICS recovery runs into an error after "apply update from sdcard"...
and how can i istall root in stock ICS .
( install the root files from the stock recovery ) more explaine plase
khad96 said:
and how can i istall root in stock ICS .
( install the root files from the stock recovery ) more explaine plase
Click to expand...
Click to collapse
Go to the thread "Root galaxy tab 10.1 the easy way". You will find the link to the file you need. Put the "update.zip" in the root folder of your tab. Reboot into recovery by switching off your tab. Press the left volume button and hold it while powering on your tab. Wait for the recovery options. Now press the volume up botton again and then vol down. Choose the option "install zip from sdcard". It will give you root access and install superuser. Now you can download busybox from the market and complete the root from within busybox app.
connect first is the right way
First .... I think you should have a pc connection to your tab ,, Transfering Files and data through the usb port is fast ,easy and useful
You nay try Install new "Windows 7" to your pc , I'm using Windows 7 and first time I connect my tab to my pc It found its driver itself (may be through internet / not sure)
ODIN is useful /// by the way you may try Mobile ODIN :good::good::good:
sorry for my English...
or I will explain in my language if you understand...
หรือให้กุอธิบายเป็นภาษาไทยก็ได้นะ ถ้าเมิงเข้าใจ 555+
here we are start again.
it need CWM and CWM need Odin and Odin need a connection but my galaxy tab 10.1 3G (P7500) have a red X on the battery icon.
any thing else.
I think I nearly understood you...if you have a red cross on the battery icon it shows that you are still running android,huh?so you need to turn off your tab and go into download mode,because Odin detects your tab only then.please feel free to ask if you don't know how...
yes you are right I'm running android ( big smile )
i did exactly like you said but no luck. still waiting usb cable.
did not connect
....
Did you try mobile ODIN yet
yes i try mobile ODIN . and it's need root correct me if I'm wrong.
khad96 said:
yes i try mobile ODIN . and it's need root correct me if I'm wrong.
Click to expand...
Click to collapse
Can you enter download mode with your tab, odin doesn't connect untill you use download mod, and you can try stock recovery. To flash the root.zip
Sent from my GT-P7500 using xda app-developers app
yes i can enter Downloading mode and Recovery mode screen.
( Hold the Vol Down button (the left Volume button) and then hold the Power button as well. )
( Press the Vol Up button (the right Volume button) to select Downloading mode. )
then a warning .....
Volume up : continue
a screen with a green android and downloading...do not turn off target!! with small text on top left say:
odin3 download made
( protocol v2)
reason :force key
secure mode: secure
check signature: check
custom binary download: no (0 counts)
current binary: samsung official
waiting usb cable...
---- then---
i plug the usb cable in the computer and in the tab and run odin .
but nothing happen still waiting the cable and odin not connected to tab
retail locked ?
look for unlock
but try "Mobile odin" it install clock work recovery .
just make sure u get both .apk Mobilelite.apk and then flashkernel.p7500v2.apk
Google search "chainfire mobile odin xda"
scroll down to third post or so for 2nd apk in mobile odin thread.
( also read mobile odin thread )
then when u select recovery after pressing power + volume down.
selecting recovery should boot into cwm 5.5.0.4 recovery
sorted hope this helps
Sent from my GT-I9300 using xda premium
Connect your pc to your tab when you are in android,make sure your tab's drivers are installed,go to here:
sites.google.com/site/arashtarafar/
Download "recovery.tar.md5" at the bottom of the page...
Put your tab into download mode(a green android image will appear on the screen),launch Odin,connect tab to pc,if you don't have the tab's drivers but have an internet connection,windows(mine windows 7) will automatically search for and install them.if so,wait until finished,then you should see a text with yellow background showing "COM X(1,2,3,...)"that tells that your tab is detected by Odin,now in Odin press the pda button and in the browser window that appears choose your recovery(you've downloaded that),wait until a word "PASSED" with green backgroung appears,disconnect tab from pc...go into recovery,if you see a rolling screen press the power button to restart tab,then go to the above link and download "bootloader.tar.md5",flash this with the above instructions...
Important Notice: Do Not Flash The Bootloader If You Are Running Stock ICS!!!It Causes Flickering Unlock Screen!!!You've Been Warned!!!
Ask more if it didn't help
gordonx10i said:
retail locked ?
look for unlock
Click to expand...
Click to collapse
well ! my tab is not retail locked because i upgrade it from 3.1 to 4.0.4 by rooting 3.1 then install the ICS from install from sdcard.
arashtarafar said:
Connect your pc to your tab when you are in android,make sure your tab's drivers are installed,go to here:
sites.google.com/site/arashtarafar/
Download "recovery.tar.md5" at the bottom of the page...
Put your tab into download mode(a green android image will appear on the screen),launch Odin,connect tab to pc,if you don't have the tab's drivers but have an internet connection,windows(mine windows 7) will automatically search for and install them.if so,wait until finished,then you should see a text with yellow background showing "COM X(1,2,3,...)"that tells that your tab is detected by Odin,now in Odin press the pda button and in the browser window that appears choose your recovery(you've downloaded that),wait until a word "PASSED" with green backgroung appears,disconnect tab from pc...go into recovery,if you see a rolling screen press the power button to restart tab,then go to the above link and download "bootloader.tar.md5",flash this with the above instructions...
Important Notice: Do Not Flash The Bootloader If You Are Running Stock ICS!!!It Causes Flickering Unlock Screen!!!You've Been Warned!!!
Ask more if it didn't help
Click to expand...
Click to collapse
this is my problem odin can't see my tab even my pc or other pc. always give me an red X on the battery.
but it charge from pc when it's on or off
So you can wait until we send you a video or image tutorial...
thanx you all for your help.
yes i can wait
I have the same problem. I upgrade to ICS and now i can't connect the tab to the computer ( Odin, kies....). It isn't root and i can't to do it without odin. I can't to install the CWM without root or odin.
What can i do?
Thanks
We'll give it soon...for now let's check MTP,for this:go to settings-->storage-->the button at the upper right corner(menu)-->USB-PC connection and check whether "Media device(MTP)" is checked.if it's not,check it and retry connecting tab to pc...
Hey guys
I made this video a while ago on how to restore your Galaxy Tab 10.1 back to stock using ODIN. Hopefully it helps some people out.
http://www.youtube.com/watch?v=gJ6VZGCdRSo
Thanks!
eddychecker said:
Thanks!
Click to expand...
Click to collapse
np
Here's a quick step as well from my memory only, I just did this 2 days ago.
0. Ensure the tablet is at least 50% charged and is turned off.
1. Download Samsung USB driver and install on your PC.
2. Download Odin and extract to a folder.
3. Download the correct stock firmware from sammobile.com/firmware OR from samsung-updates.com. I would prefer the latest one. I got the Dec 20 2012 New Zealand for P7510. Extract the MD5 file on the folder where you placed Odin.
4. Run Odin as Administrator, tick on PDA, and choose the firmware file (extension is MD5). Leave the other options as is. Odin will take a minute or so to process the firmware.
5. While tablet still off, plug the USB cable on the samsung connector on the tablet. Don't insert in the PC yet.
6. Turn on the tablet by holding POWER and the VOLUME DOWN button to enter the recovery. Using the VOLUME DOWN button, move the highlight to the "Download Mode" (the right option), and press VOLUME UP button to choose it, and Continue after the warning.
7. Now connect the other end of the USB cable on the PC where Odin is waiting.
8. Click START in Odin and wait for it to finish. The tablet will reboot when done.
9. If for some reason it hangs on SAMSUNG startup, repeat step 6 above but choose the left option (instead of download mode), and do a factory reset, and reboot the tablet after.
10. Done. Pure stock.
Ok,l was able to restore my stock rom,but after that my internal storage became 2gb instead of 16gb,help!
Sent from my A90 using xda premium
Perhaps you need to tick repartition in Odin? Just a guess though.
Sent from P7510 Tapatalk2
great post :good:
Yeah, great info. Thanks:good:
No Root
jtdc said:
Here's a quick step as well from my memory only, I just did this 2 days ago.
0. Ensure the tablet is at least 50% charged and is turned off.
1. Download Samsung USB driver and install on your PC.
2. Download Odin and extract to a folder.
3. Download the correct stock firmware from sammobile.com/firmware OR from samsung-updates.com. I would prefer the latest one. I got the Dec 20 2012 New Zealand for P7510. Extract the MD5 file on the folder where you placed Odin.
4. Run Odin as Administrator, tick on PDA, and choose the firmware file (extension is MD5). Leave the other options as is. Odin will take a minute or so to process the firmware.
5. While tablet still off, plug the USB cable on the samsung connector on the tablet. Don't insert in the PC yet.
6. Turn on the tablet by holding POWER and the VOLUME DOWN button to enter the recovery. Using the VOLUME DOWN button, move the highlight to the "Download Mode" (the right option), and press VOLUME UP button to choose it, and Continue after the warning.
7. Now connect the other end of the USB cable on the PC where Odin is waiting.
8. Click START in Odin and wait for it to finish. The tablet will reboot when done.
9. If for some reason it hangs on SAMSUNG startup, repeat step 6 above but choose the left option (instead of download mode), and do a factory reset, and reboot the tablet after.
10. Done. Pure stock.
Click to expand...
Click to collapse
I have a slight problem and I hope this is the right forum page...
I flashed my tablet with Cyanogenmod 10.1 but have lost my ability to root my phone!!
To say the least it is a but frustrating. (Samsung Tab 2 10.1)
Thanks in advance
h8m8ker said:
I have a slight problem and I hope this is the right forum page...
I flashed my tablet with Cyanogenmod 10.1 but have lost my ability to root my phone!!
To say the least it is a but frustrating. (Samsung Tab 2 10.1)
Thanks in advance
Click to expand...
Click to collapse
You know there is a GT2 forum and not everything here is compatible between this original 10.1 and yours.
Sent from my Galaxy Nexus using xda premium
Will this wipe all my photos and personal stuff??
Sent From My Galaxy S3 Boricua 100%
Just bought a used 10.1 and this worked great for me. Previous owner really messed up the firmware before! The home button didnt even work! Thanks OP
thank you
Can I flash the room directly from recovery with full wipe?
Sent from my GT-P7310 using xda premium
---------- Post added at 02:46 PM ---------- Previous post was at 02:08 PM ----------
Ok is an md5. Done by odin thanks
Sent from my GT-P7310 using xda premium
eMMC Bug
Hi Dear Madmajd,
I own the Gtab 10.1 (P7510) is with the eMMC bug, if I perform this procedure can resolve?
Thank you.
Thanks! :victory:
hi, how would i know if the unit came from korea? so i would not make mistake in flashing a rom?
it says model number gt-p7500
4.0.4
i9103xxLQ3
[email protected] #1 SMP PREEMPT mon AUG 20 18:41 KST2012
IMM76D.DXLP9
Thx for the info!
No luck restoring/resetting Tab
So I followed all instructions, found the right firmware, got Odin, everything seemed to go well, my tablet indicated that it was downloading the firmware, Odin finished and announced success... but my Tablet screen is black again, it doesn't reboot. Trying to reboot just gets me back to where I was before: Eternally stuck on the Samsung logo, unable to even turn it off for more than a few seconds because it simply turns itself back on and goes to the logo screen.
Trying to do a hard reset leads to the same black screen as the end result of Odin. Plugging in the tablet leads to a battery screen that looks frozen (though it does charge).
Anyone have any idea what's wrong with it?
Thank you for the information
Hi guys! This is a noob-proof guide on how to flash stock samsung firmware on your i9300. Whether you have bricked it or just want the stock firmware back. Here's how to do it (detailed explaination)
WARNING! : This is only for the GT i9300 (international version) , Check your device before proceeding. Also you might lose all your data. So backup! i am not responsible if you brick your phone(although very unlikely) by not following the guide properly
Also you will lose your custom recovery, Custom ROM and will not longer have root
Ok lets begin!
1. Make sure you have the samsung drivers installed on your pc (http://bit.ly/SDaIIE)
2. Your device should have at least 80% battery left
3. Enable USB Debugging by going to Settings>Developer Options>Tick the Usb debugging tick box!
Files needed :
1. Android 4.1.2 I9300XXEMA1 for Galaxy S3 I9300 - http://bit.ly/10vkxdj
2. Odin 3.07 - http://bit.ly/16aRzF4
Extract The firmware Zip file until you get a file with a .tar extension and some other files. Do not extract furthur
Extract odin zip file till you get Odin3 v3.07.exe
Now here comes the actual flashing part
1. Power off your smartphone. Wait 5-6 seconds for vibration to confirm complete switch off.
2. Now, get into Download Mode by pressing and holding Volume Down, Home and Power button simultaneously until Samsung Galaxy logo appears in phone screen. Wait few seconds and your phone will be in download mode.
3.Open odin as administrator and connect your s3 to your computer with usb cable
4. You will get a message "Added" in the message box in odin and You should also see COM port with a number in Yellow if you successfully added your device.
if you don't get this , try another usb port.. if it still doesn't come , reinstall drivers.
5. Select these files from I9300XXEMA1 folder in Odin at respective buttons:
Click the PDA Button, and select the .tar.md5 file here with *code* appearing in its name
Click the Phone Button, and select file with *modem* in its name (leave if there is no such file)
Click the CSC Button, and select file with *csc* in its name (leave if there is no such file)
Click the PIT Button, and select the .pit file. Use only if you got it while extracting , otherwise ignore it.
6. make sure Auto Reboot and F. Reset Time checkboxes are selected. Also, make sure that Re-Partition checkbox is selected, only if you are using a .pit file
7. Double check everything above and hit start!
8. once flashing is complete the phone will reboot automatically and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can then unplug the USB cable to disconnect your device from computer.
congratz , you have just restored your i9300!
If this has helped you make sure to hit the thanks button!
what have you developed?
We already know Odin, and this doesn't UNBRICK anything
Sent from my GT-I9300 using xda premium
This is so worthy of development thread. ...:banghead:
Sent from my GT-I9300 using xda premium
Helpful post to some,,,,,however the unbrick part is misleading as all this does is flash a stock ROM.
Only soft brick... like any other Samsung device.
Reported not development plus we have all this information already posted .
OP is splattering this post all over the forum .
jje
How to root samsung galaxy s4?
CyanogenModFT said:
How to root samsung galaxy s4?
Click to expand...
Click to collapse
Wrong section. Please close this and go to question tread
Sent from my GT-P7500 using xda app-developers app
1) Download and install USB Driver for Samsung Galaxy S4 on the computer.
2) Verify that USB Debugging Mode is enabled which will allow to connect the phone with the computer and use the Android SDK with it. [Press Menu>> Settings>> Applications. From there navigate and click on Development option and ensure the USB Debugging Mode is turned on.]
3) Create a backup of all data
4) The battery of the device should have above 80 per cent charge.
5) The root method works only on the Samsung Galaxy S4 I9500 running on Android 4.2.2 XXUAMC6 Jelly Bean; applying this root to incorrect variants will brick the device.
Steps to root Samsung Galaxy S4 I9500 on Android 4.2.2 XXUAMC6 Jelly Bean
1) Download I9500XXUAMC6 pre-rooted firmware for Samsung Galaxy S4 to the computer and extract the zip file
2) Download Odin v1.85 which will help to root the Jelly Bean firmware
3) Turn off the Galaxy S4 and enter Download Mode. Press and hold Volume Down + Home buttons together and then press the Power button until the construction Android robot and a triangle are seen. Press the Power button again to enter Download Mode
4) Run Odin on the computer
5) Connect the phone to the computer using USB cable while it is in Download Mode. If the device is connected successfully, one of the ID: COM boxes will turn yellow with the COM port number. This step might take some time
6) Select the files mentioned below to install on the phone
a) Click on 'PDA' and select file with 'CODE' in its name
b) Click on 'Phone' and select file with 'MODEM' in its name
c) Click on 'CSC' and select file with 'CSC' in its name
d) Click on 'PIT' and select the .pit file
7) Ensure the 'Auto Reboot' and 'F Reset Time' options are selected in Odin. Also ensure the 'Re-Partition' option is selected in case the .pit file is being used
8) Double check everything and finally click the 'Start' button in Odin. The installation process will begin and take a few minutes to complete
9) After the installation process is completed, the phone will restart automatically. Once the home screen appears on the device, unplug the USB cable
:good::good:
Before doing anything, make a backup to your external MicroSD card before continuing. Even if this method is very safe, and has been done several times without problems, we can't predict anything that may happen during the process.
RESTORE YOUR TABLET TO STOCK, APPLY ROOT, THEN FLASH A NEW RECOVERY.
This tutorial applies to both P3110 and P3113. They are the exact same models.
REQUIRED:
Odin ( Take any version you wish. The latest ones should do the trick )
The stock Firmware file. Concerning this part, Google is your friend.
The official Samsung USB Cable that came with your tablet. It is recommended (but optional) to connect your tablet into your computer's built-in USB ports.
The latest Odin-flashable recovery. ( P3113 uses P3110 files )
CF-Auto-Root
Patience
Returning your device to a like-new state.:
1. Boot into Recovery Mode. This can be achieved by holding Volume Up + Power when your device is powered off.
2. Wipe all data. [ Factory Reset ( /data /cache ), System ( /system ) and Internal Data ( /media/storage )
3. Reboot into Download Mode. Usually found on the Advanced Options of most CWM-based recoveries.
It happens that your Tablet cannot boot into Download Mode due to various reasons. There is a battery trick that can be achieved. Do it when you absolutely cannot boot into Download Mode.
1. Remove your tablet's battery.
2. Connect your tablet to your computer
3. Your device should automatically boot into Download Mode.
4. Put back your Battery back into your device.
Click to expand...
Click to collapse
4. Connect your Tab to your Computer
5. Run Odin as Administrator + Windows XP SP3 Compatibility Mode ( Right-Click > Run as Administrator // Right-Click > Properities > Compatibility > Windows XP Service Pack 3 )
6. Click the "PDA" button, and select the previously-downloaded firmware file.
7. Press Start ( Do not check repartition. It will totally screw up your device. )
8. The installation process will overwrite all data on your device and install the stock firmware.
9. You are done.
Click to expand...
Click to collapse
Rerooting your device.
1. Reboot your device into Download Mode. From there, you are not obligated to connect your device to your computer.
2. Open Odin as Administrator + Windows XP SP3 Compatibility
3. Connect your Device to the computer.
4. Click on PDA and select the CF-Auto-Root package you previously downloaded
5. Click Start, with Auto Reboot Checked! Again, do not check "Repartition" as it may screw up your device.
6. Wait until it's done.
Click to expand...
Click to collapse
Installing CWM Advanced Recovery!
1. Reboot your device in Download Mode.
2. Open Odin as Administrator + Windows XP SP3 Compatibility
3. Connect your Device to the computer.
4. Click on PDA and browse the Odin-packed CWM package you downloaded.
5. Click Start, with Auto Reboot Checked! Again, do not check "Repartition" as it may screw up your device.
6. Wait until it's done.
Click to expand...
Click to collapse
Press the thanks button if this tutorial helped you.
If you have any problems, feel free to post in the thread. tho I won't probably help you.
Nice guide, but don't we have enough?
Sent from my GT-P3113 using Tapatalk HD
Luigi2012SM64DS said:
Nice guide, but don't we have enough?
Sent from my GT-P3113 using Tapatalk HD
Click to expand...
Click to collapse
Yup.... I think there are enough guide avout this....
Sent from my GT-I9300 using xda premium
OK, but first I must install Triangle Away to reset the counter and next I use Odin and recover original rom.
-_-
as007 said:
OK, but first I must install Triangle Away to reset the counter and next I use Odin and recover original rom.
Click to expand...
Click to collapse
Bro... You have to understand properly... Lame Juniors..
I AM NOT JUNIOR.. I JUST HAVE JOINED XDA FORUMS LATE!!:good:
In op page it is mention about battery remove /in , but my GT p3100 does not have such option, battery is permanently fixed .
Sent from my GT-P3100 using xda premium
Well when i use Customrom CM 10.1 i decide to back on Stockrom, i format my system and clear all my data so my tab was totaly clean even my customrom was gone so i flash it to stockrom. and yes my tab was totaly FRESH! :good:
idhbar said:
In op page it is mention about battery remove /in , but my GT p3100 does not have such option, battery is permanently fixed .
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
Just fellow the simple instruction: Hold Volume Down and Power when your tablet is off to go in Download Mode.
Contact me for further assistance
WaryLouka said:
Just fellow the simple instruction: Hold Volume Down and Power when your tablet is off to go in Download Mode.
Contact me for further assistance
Click to expand...
Click to collapse
Hi, I have PA installed with TWRP installed. I downloaded my firmware from http://samsung-updates.com/. Do I need to flash the stock kernel as well? and stock recovery? Sorry for the noob question.
Maybe I'm just missing it, but I've gone to a couple of firmware sites and I can't find US firmware. Is there anywhere I can get that?
Does anyone have a link that's not to one of these stupid-ass, lame, @#$%ing pay download sites?
3 hours for firmware? WTF?
jdCaptivate said:
Does anyone have a link that's not to one of these stupid-ass, lame, @#$%ing pay download sites?
3 hours for firmware? WTF?
Click to expand...
Click to collapse
Latest P3113UECMH2 (4.2.2) : http://hotfile.com/dl/241707705/3ce5c6f/XAR-P3113UECMH2-20130826170038.zip.html
Or : http://uploaded.net/file/oadonsrj
Bibicp said:
Latest P3113UECMH2 (4.2.2)
Click to expand...
Click to collapse
TYVM!
jdCaptivate said:
TYVM!
Click to expand...
Click to collapse
Don't say thanks: press it.
Thanks I'm on 4.2.2 now
Dead Tab2?
WaryLouka said:
Just fellow the simple instruction: Hold Volume Down and Power when your tablet is off to go in Download Mode.
Contact me for further assistance
Click to expand...
Click to collapse
I have a similar situation. A previous rooting operation on my Tab2 7 P3113TS was either bad or partial and it appears it will not go into the download mode. power-pgup, power-pgdn, or just power all go to the Samsung splash screen then to a blue VeinDroid rom screen but no further. I tried 3 different version of ODIN and all recognize the device (port goes yellow) but cannot communicate. It stops at the SetupConnection step. Is this thing toast or is there something I'm missing?
WaryLouka said:
If a message is shown, press Volume Up. If you can't enter downloadmode normally, try doing "adb reboot download" in ADB. If you still can't, connect your phone to your computer, REMOVE THE BATTERY, hold Volume Up/Down + Power until DownloadMode is entered and put the battery in again. If your phone doesn't boot or/and battery trick doesn't work, use an USB Jig. If theres no usb jig, while until the battery icon is shown ( charging ) then do "adb reboot download" in ADB.
Click to expand...
Click to collapse
Are you serious????
REMOVE THE BATTERY????
I think it's not recommended to do anything like this only because of flashing a Fw, isn't it?^^
help plz
Hi I lost my /efs files for my samsung galaxy tab 2 p3113 how do I fix this proble If some one can help me I would be very graitfull
Great!thanls for The tutorial
Sent from my Ativ S using Tapatalk
antkiller said:
Hi I lost my /efs files for my samsung galaxy tab 2 p3113 how do I fix this proble If some one can help me I would be very graitfull
Click to expand...
Click to collapse
do you have a backup?