Hi xda,
- Is it possible to get permanent Clockwork Recovery, if i brick my Milestone 2, so i dont must flash RSD lite every time? :laugh:
- Im developer, really small developer, im porting ROMs from another devices, but with this Motorola is very hard.
- I need that permanent CMW, if i brick my device, so i dont need to flash RSD, then ROOT, then boostrap, LOL, just to boot in recovery adn flash another ROM.
One more question:
First, i succes ported Taki Jeden ROm from Motorola Defy, based on CM10, but i need help to solve bug like Wi-Fi, and Keyboard, so if anybody can help me with solving BUGS, or porting, PM ME i want to give something Good to this community....
No. It is not possible, unless you have unlocked bootloader or you want to hard flash it to flash chip like Danik (MS2Ginger developer).
---UFO--- said:
No. It is not possible, unless you have unlocked bootloader or you want to hard flash it to flash chip like Danik (MS2Ginger developer).
Click to expand...
Click to collapse
hello UFO. how danik did that? Are you developer, if u are, do you want to make team for developing ROMs for Milestone 2 ? :thumbup:
Sent from my A953 using xda app-developers app
Galaxy3HELL said:
hello UFO. how danik did that? Are you developer, if u are, do you want to make team for developing ROMs for Milestone 2 ? :thumbup:
Sent from my A953 using xda app-developers app
Click to expand...
Click to collapse
You should ask Danik himself.
As for invitation, thank you but I really don't have enough time.
Sent from my XT897 using Tapatalk 4
---UFO--- said:
You should ask Danik himself.
As for invitation, thank you but I really don't have enough time.
Sent from my XT897 using Tapatalk 4
Click to expand...
Click to collapse
If you find some time, im working on port from defy, maybe i need to solve some bugs. Please, send private message to me.
thanks UFO. :laugh:
Related
Hi im wondering if i can use cyanogenmod on g3?thank you for reply!
Sent from my GT-I5800 using XDA App
I was also thinking the same. GURUS pls guid us newbees.
1UP Here.
I really want CyanogenMOD
Me too.but is suported on g3?
Sent from my GT-I5800
Everyone in G3 community should register on cyanogenmod site & add a post supporting CM for G3 in the CyanogenMod Ports forum..I have just done this..unless we show numbers & some people take lead, CM won't come to G3..
Just did..
So if we do that then is posible that we will get cyanogen mod?
Sent from my GT-I5800
Well, since we don't have 2.2 kernel source, yet, it can't be done.
Gsam101 said:
Well, since we don't have 2.2 kernel source, yet, it can't be done.
Click to expand...
Click to collapse
Well then that day needs to come faster!
Ok i am right away registring on "cyanogenmod" if it helps.
+1. i wanr cyanogen! im going to register in that site NOW!
Sent from my GT-I5800 using Tapatalk
Cyanogen mod?
Hi, I want to get Cyanogen mod too. I read that is now available kernel source for Froyo for this mobile so I hope to cyanogen mod will be done for our mobile nearly.
Sory of my bad English. I am Czech
And ...if... cyanogen mod would be possible, could we get gingerbread?
I like that
Yeah cm^^ i would love having it on my phone.
Sent from my GT-I5800 using XDA App
I thought the kernel sources were already out
Indroid 3.0 stock lagfixed
Thank you very much!
Thank you very much!
[email protected] said:
Thank you very much!
Click to expand...
Click to collapse
Do you have them??
Humpie said:
And ...if... cyanogen mod would be possible, could we get gingerbread?
Click to expand...
Click to collapse
i dont gingerbread would be possible ....it requires 1 ghz
+1
would certainly be nice to have it on our phone!
Hey guys i was wondering if i can flash any roms using stock recovery or hbootb on the update.zip format or PB__ format? Thank you for your help...i am running the latest ota 2.3
Sent from my PG06100 using XDA Premium App
Nope
Sent from my Speedy using XDA App
Sorry but ^^ is right your out of luck right now. you need s-off with clockworkmod to flash any ROM available for the shift. And as I'm sure you know (or you wouldn't have asked this ) this has not been achieved for the shift yet.
Patience young grasshopper. The rainbows just over the hill... Or some s*** like that
+1
But I want it now and I want another Recovery and the Source Code Kernel and .....
prboy1969 said:
+1
But I want it now and I want another Recovery and the Source Code Kernel and .....
Click to expand...
Click to collapse
Haha like I said above
I think ima put that as my signature
"patience young grasshopper. The rainbows just over the hill.. Or some s*** like that"
Thats my new phrase lol
Searching a dev who understand about source ... i wona build mozilla boot to Gecko for X8 :fingers-crossed: or help in this theard ..
1.Resize - http://forum.xda-developers.com/showthread.php?t=1593121
2. or build from source - https://github.com/mozilla-b2g/B2G
And tut from here - https://developer.mozilla.org/en-US/docs/Mozilla/Boot_to_Gecko/Building_and_installing_Boot_to_Gecko
Yes .. the system its too big for our device... so i search and a dev for kernel or help (to do sd-ext in kernel)
And why..B2G is alpha stage..wait for stable ROM
Sent from my E15i using xda premium
I know.. but you wona say its not better to do it ........
Honestly, why? Why on earth would you need B2G on an X8? You're far better off trying to develop for JB or ICS. But I support you and would also like to help, but I cannot download the sources as my Internet connection sucks big time. And also you need to figure out a way to run the kernel from sd-ext if I'm not mistaken. So if the sdcard goes bust somehow, the user's screwed (for some time), right? Keeping these things in mind, I personally feel that developing for JB or ICS would be far better. Still with you, if you need any help.
souljaboy11792 said:
Honestly, why? Why on earth would you need B2G on an X8
Click to expand...
Click to collapse
Sometime the world is not enough for you. There gonna be something better from the basic.
People want an innovative and not honestly "Argh argh" who sue for thier innovative
souljaboy11792 said:
Honestly, why? Why on earth would you need B2G on an X8? You're far better off trying to develop for JB or ICS. But I support you and would also like to help, but I cannot download the sources as my Internet connection sucks big time. And also you need to figure out a way to run the kernel from sd-ext if I'm not mistaken. So if the sdcard goes bust somehow, the user's screwed (for some time), right? Keeping these things in mind, I personally feel that developing for JB or ICS would be far better. Still with you, if you need any help.
Click to expand...
Click to collapse
Honestly, im sick and tired of hearing JellyBean =.= it'd be nice to hear something else for a change
Please, stop this "Why on earth would you need B2G " .. If any wona help me, write PM
You can take a look at the github.com/adfad666 .
He started on porting to LG P500. As we share the same chipset it can be used as base for x8 too.
It compiles for us, but we have some booting issues. But if someone over here manages to solve it...
Sent from my GT-I9300 using xda app-developers app
Mozilla Boot to Gecko Coming up tomorrow - Builded from source and MDPI Resized !!
Now i up GitHub Source !!!!
So you got it booting? Super!
Sent from my GT-I9300 using xda app-developers app
_Arjen_ said:
So you got it booting? Super!
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Not think ... ..... I need Kernel dev for booting .. For more info follow my twitter !
Edit : Just wait tomorrow
Heard from Adfad666 that a lot of code is armv7-based, so there is still some work...
You should use nAa cm9 kernel for it.
Sent from my GT-I9300 using xda app-developers app
_Arjen_ said:
Heard from Adfad666 that a lot of code is armv7-based, so there is still some work...
You should use nAa cm9 kernel for it.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yes.. it will nAa-ics only
i changed my mind. move over jellybean hello B2G. so how'd you get it booting and how'd you fix the kernel from sd-ext thingy?
souljaboy11792 said:
Honestly, why? Why on earth would you need B2G on an X8? You're far better off trying to develop for JB or ICS. But I support you and would also like to help, but I cannot download the sources as my Internet connection sucks big time. And also you need to figure out a way to run the kernel from sd-ext if I'm not mistaken. So if the sdcard goes bust somehow, the user's screwed (for some time), right? Keeping these things in mind, I personally feel that developing for JB or ICS would be far better. Still with you, if you need any help.
Click to expand...
Click to collapse
Honestly why on earth would you need (check out my tuts).but its nice to have them
good point fotak-x which is exactly why i changed my mind? it'd be nice to see B2G running on our phones, even if it's just a proof of concept.
have you stopped working on it ? Because as I can see on your twitter you are into sense nowadays
Good luck Danibosdev
Envoyé depuis mon X8 avec Tapatalk
Porting MIUI v5 to N7105 - seasoned flasher with actual "cojones of steel" required!!
Ok guys, I own a Note 2 N7100, but my wife's N7105 in on it's way.. I have spent the last 3 days reading, reading and reading guide after guide about porting roms and miui roms so I'm pretty sure I've got all bases covered!
I have modified MyMiui v5 by aminalmo from the At&T thread..
I'm uploading it now, would really appreciate if a real dev could take an interest in this to take over and do it "properly"..
Here's the link, obviously flash only if you take ALL responsibility for doing so!
But please report back!!!!!!!
So, who's adventurous enough?
https://www.dropbox.com/s/1h9tkfl6qfrmq7f/MyMiui-V5-N7105.zip
Someone's gotta be brave enough....
Sent from my GT-N7100 using xda app-developers app
Now being challenged.
However, It did not work.. T-T..
I also try MIUI V5 port n7105.. but My rom's audio does not work.
I'm not good at English.
Mimpi said:
Now being challenged.
However, It did not work.. T-T..
I also try MIUI V5 port n7105.. but My rom's audio does not work.
I'm not good at English.
Click to expand...
Click to collapse
Can you try to explain more? Did it flash completely?
Sent from my GT-N7100 using xda app-developers app
keenan316 said:
Can you try to explain more? Did it flash completely?
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
your rom is not working on my recovery.(it don't flash completely..)
I used your rom, cook again using ktichen..
andddddd.... it's not work...
i Recommend this rom. http://forum.xda-developers.com/showthread.php?t=2071480
it also n7105 miui v5.
Mimpi said:
i Recommend this rom. http://forum.xda-developers.com/showthread.php?t=2071480
it also n7105 miui v5.
Click to expand...
Click to collapse
Have you flashed this rom already?
keenan316 said:
Have you flashed this rom already?
Click to expand...
Click to collapse
no, i think this rom have many don't need things.. so i fix this rom, now.
but you need to something help, i can flash your's.
Mimpi said:
no, i think this rom have many don't need things.. so i fix this rom, now.
but you need to something help, i can flash your's.
Click to expand...
Click to collapse
I've taken that rom and stripped the kernel and modified the update script. Busy uploading it now, but it's taking long...
Can I PM you a link once it's uploaded?
keenan316 said:
I've taken that rom and stripped the kernel and modified the update script. Busy uploading it now, but it's taking long...
Can I PM you a link once it's uploaded?
Click to expand...
Click to collapse
sorry, im late..
now , i'm using self porting mymiuiV5, and ... sorry i don't understand what's PM mean!
Mimpi said:
sorry, im late..
now , i'm using self porting mymiuiV5, and ... sorry i don't understand what's PM mean!
Click to expand...
Click to collapse
PM is private message..
Here's a link to the modified MyMiui v5 by aminalmo from the At&T thread!
https://www.dropbox.com/s/1h9tkfl6qfrmq7f/MyMiui-V5-N7105.zip
Sent from my GT-N7100 using xda app-developers app
Thanks for sharing.
What modification u made?
update: nvm. u mention before the removing of the kernel and update script.
will try flash it later after backup my phone.
nameejokerx said:
Thanks for sharing.
What modification u made?
update: nvm. u mention before the removing of the kernel and update script.
will try flash it later after backup my phone.
Click to expand...
Click to collapse
Yes, just taken out the kernel and updated the install-script...
Let me know if it flashed successful for you ok...
Sent from my GT-N7100 using xda app-developers app
Still need testers.. :thumbup:
Sent from my GT-N7100 using xda app-developers app
Avaiable free ram only 765mb?flash it on my international n7105 note 2.
Is it registering all 2gb? Can you check running services? Have you tried killing all running apps?
Free memory should be around 1200mb
Sent from my GT-N7100 using xda app-developers app
Yes.i already kill all app running.even when i reboot it will ok for a while.and one more thing.my model number is sgh×××.not n7105
Hi There,
I have a note 2 lte (N7105T)
This Rom seems to be quite stable as does Aminalmo's which also works for me, only bug so far is the fc when a caller hangs up first. Apart from that i cant tell the difference from this rom and Aminalmo's
Thanks for posting this Miui V5 is a really nice smooth rom - i switched to perseus kernel and it seems to be work well also.
Hope this info helps.
-Dan
does LTE works on this version? thanks.
Hi, the Rom work great for me. Is it any chance to see port of latest Miui Rom for our phone (N7105)?
wiegraf said:
Hi, the Rom work great for me. Is it any chance to see port of latest Miui Rom for our phone (N7105)?[/QUOTE
i also waiting.but now i running miui by aminalmo...no choice
Click to expand...
Click to collapse
Hey,
Im on vacation, so i decide to learn hot to build from sources.
Im stuck on some compilation problems but xda university is giving some aid.
Here some interesting github.
Schichu(Tegra 2 lead developer cm11)
https://github.com/Schischu
My intention is to open a discussion thread for we to move forward and help each other to bring more advanced stuff to these poor phone.
pedrocel85 said:
Hey,
Im on vacation, so i decide to learn hot to build from sources.
Im stuck on some compilation problems but xda university is giving some aid.
Here some interesting github.
Schichu(Tegra 2 lead developer cm11)
https://github.com/Schischu
My intention is to open a discussion thread for we to move forward and help each other to bring more advanced stuff to these poor phone.
Click to expand...
Click to collapse
You might be interested in the thread on system partitioning. It is in dev section near the top
I've built, but I do not fail to start
fengyr said:
I've built, but I do not fail to start
Click to expand...
Click to collapse
I do not fail to start? You mean it works?
Sent from my MB886 using xda app-developers app
palmbeach05 said:
I do not fail to start? You mean it works?
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
I built 4.4 can not start on atrix.
fengyr said:
I built 4.4 can not start on atrix.
Click to expand...
Click to collapse
Built but no boot. Ok
Sent from my MB886 using xda app-developers app
I am just curious. Are you installing rom via fastboot or recovery?
anyone have 4.4 working on atrix 4g?
Has anyone got 4.4 to boot on atrix i heard you need an updated cwm recovery so i have 6.0.4.7 recovery now so if any new info plz post. Willing to test if anyone has a build
Ok to reword my last post so no confusion. I am not asking for a finished shiny new rom to play with i am offering my device to test the things any dev has on atrix 4g regarding cm11 i also know from reading other posts that the older cwm recovery doesnt play well with cm11 i couldnt even get itvto flash 4.3.1 so had to update to 6.0.4.7 sorry getting off subject but as someone here posted they got it to install but no boot well would the recovery have anythingvto do with that. I want to learn alot more then i know but no pc right now when i do get one i will get more into this so i can contribute my knowledge as well. Thanks in advance to any response
Mikeyd7186 said:
Ok to reword my last post so no confusion. I am not asking for a finished shiny new rom to play with i am offering my device to test the things any dev has on atrix 4g regarding cm11 i also know from reading other posts that the older cwm recovery doesnt play well with cm11 i couldnt even get itvto flash 4.3.1 so had to update to 6.0.4.7 sorry getting off subject but as someone here posted they got it to install but no boot well would the recovery have anythingvto do with that. I want to learn alot more then i know but no pc right now when i do get one i will get more into this so i can contribute my knowledge as well. Thanks in advance to any response
Click to expand...
Click to collapse
I too am willing to offer my Atrix for testing. But will as soon as we have a stable 3.1.10 kernel.
To correct myself i have cwm 6.0.4.6 not 6.0.4.7 sorry for the mistake
Sent from my MB860 using xda app-developers app
even if you manage to build a proper cm11 rom for atrix, there are still kernel issues to be solved. My personal advice is to work on kernel adjustments and tweaks (or whatsoever.)
Let me preface this by saying that I'm not a dev. However the problem as I see it is that you're working on a kernel for an older version of android. Why not just go around the problem and try to make it work with the newer version instead? I mean when it works fully it most likely won't work with KitKat right away anyway right?
Scary Guy said:
Let me preface this by saying that I'm not a dev. However the problem as I see it is that you're working on a kernel for an older version of android. Why not just go around the problem and try to make it work with the newer version instead? I mean when it works fully it most likely won't work with KitKat right away anyway right?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=51386363&postcount=2006
Hey guys! There is a discussionhttp://forum.xda-developers.com/atrix-4g/development/rom-cm-11-android-4-4-4-atrix-bigpart-t2847281 about it already.
Sent from my MB860 using XDA Free mobile app
Reported.
This thread is older than the one in development section
Enviado desde mi Moto X usando Tapatalk 2