[Dev] Cm11 Discussion for Atrix 4G - Atrix 4G General

Hey,
Im on vacation, so i decide to learn hot to build from sources.
Im stuck on some compilation problems but xda university is giving some aid.
Here some interesting github.
Schichu(Tegra 2 lead developer cm11)
https://github.com/Schischu
My intention is to open a discussion thread for we to move forward and help each other to bring more advanced stuff to these poor phone.

pedrocel85 said:
Hey,
Im on vacation, so i decide to learn hot to build from sources.
Im stuck on some compilation problems but xda university is giving some aid.
Here some interesting github.
Schichu(Tegra 2 lead developer cm11)
https://github.com/Schischu
My intention is to open a discussion thread for we to move forward and help each other to bring more advanced stuff to these poor phone.
Click to expand...
Click to collapse
You might be interested in the thread on system partitioning. It is in dev section near the top

I've built, but I do not fail to start

fengyr said:
I've built, but I do not fail to start
Click to expand...
Click to collapse
I do not fail to start? You mean it works?
Sent from my MB886 using xda app-developers app

palmbeach05 said:
I do not fail to start? You mean it works?
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
I built 4.4 can not start on atrix.

fengyr said:
I built 4.4 can not start on atrix.
Click to expand...
Click to collapse
Built but no boot. Ok
Sent from my MB886 using xda app-developers app

I am just curious. Are you installing rom via fastboot or recovery?

anyone have 4.4 working on atrix 4g?
Has anyone got 4.4 to boot on atrix i heard you need an updated cwm recovery so i have 6.0.4.7 recovery now so if any new info plz post. Willing to test if anyone has a build

Ok to reword my last post so no confusion. I am not asking for a finished shiny new rom to play with i am offering my device to test the things any dev has on atrix 4g regarding cm11 i also know from reading other posts that the older cwm recovery doesnt play well with cm11 i couldnt even get itvto flash 4.3.1 so had to update to 6.0.4.7 sorry getting off subject but as someone here posted they got it to install but no boot well would the recovery have anythingvto do with that. I want to learn alot more then i know but no pc right now when i do get one i will get more into this so i can contribute my knowledge as well. Thanks in advance to any response

Mikeyd7186 said:
Ok to reword my last post so no confusion. I am not asking for a finished shiny new rom to play with i am offering my device to test the things any dev has on atrix 4g regarding cm11 i also know from reading other posts that the older cwm recovery doesnt play well with cm11 i couldnt even get itvto flash 4.3.1 so had to update to 6.0.4.7 sorry getting off subject but as someone here posted they got it to install but no boot well would the recovery have anythingvto do with that. I want to learn alot more then i know but no pc right now when i do get one i will get more into this so i can contribute my knowledge as well. Thanks in advance to any response
Click to expand...
Click to collapse
I too am willing to offer my Atrix for testing. But will as soon as we have a stable 3.1.10 kernel.

To correct myself i have cwm 6.0.4.6 not 6.0.4.7 sorry for the mistake
Sent from my MB860 using xda app-developers app

even if you manage to build a proper cm11 rom for atrix, there are still kernel issues to be solved. My personal advice is to work on kernel adjustments and tweaks (or whatsoever.)

Let me preface this by saying that I'm not a dev. However the problem as I see it is that you're working on a kernel for an older version of android. Why not just go around the problem and try to make it work with the newer version instead? I mean when it works fully it most likely won't work with KitKat right away anyway right?

Scary Guy said:
Let me preface this by saying that I'm not a dev. However the problem as I see it is that you're working on a kernel for an older version of android. Why not just go around the problem and try to make it work with the newer version instead? I mean when it works fully it most likely won't work with KitKat right away anyway right?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=51386363&postcount=2006

Hey guys! There is a discussionhttp://forum.xda-developers.com/atrix-4g/development/rom-cm-11-android-4-4-4-atrix-bigpart-t2847281 about it already.
Sent from my MB860 using XDA Free mobile app

Reported.
This thread is older than the one in development section
Enviado desde mi Moto X usando Tapatalk 2

Related

VZW Galaxy Tab i815 Custom Rom?

Hey, Guys excuse me if it seems like I haven't read enough, but I was wondering has any of the Devs created a custom Rom for the Verizon tab 7.7? If so could you post some links in this thread. Thanks
platodd said:
Hey, Guys excuse me if it seems like I haven't read enough, but I was wondering has any of the Devs created a custom Rom for the Verizon tab 7.7? If so could you post some links in this thread. Thanks
Click to expand...
Click to collapse
Not yet. Very little is going on with our tablet. You CAN root it easily. I also installed Tegra Overclock app from market. Other than that...zilch. Its not like the last 7" VZW Tablet that we could have lots of ROMS for.
Yep, I think it may have been the price point combined with the contract element, that has kept the Devs from purchaseing one or being willing to play around with it. Maybe once there is stock restore firmware available, we will start seeing something. Sadly, by that time we will have ics and may not need a custom Rom at all.
Sent from my SCH-I815 using XDA Premium HD app
platodd said:
Hey, Guys excuse me if it seems like I haven't read enough, but I was wondering has any of the Devs created a custom Rom for the Verizon tab 7.7? If so could you post some links in this thread. Thanks
Click to expand...
Click to collapse
Could you post a link to latest firmware, is there ics yet?
sk806 said:
Could you post a link to latest firmware, is there ics yet?
Click to expand...
Click to collapse
There is no firmware for our device available yet, that's why we done have a custom Rom yet.
locerra has been working on a CM9 port, it's posted in this forum, although it's still in it's early stages (no data or wifi for the 815)
Id like to just seeif i could flash it, then i would go right back.
Sent from my SCH-I815 using XDA Premium HD app
Thankful he got an i815! Otherwise atm we're kinda ****ed when it comes to development
Sent from my Galaxy Nexus using xda premium
I ran the CM9 Rom and it worked fine and was very fast and smooth. When they get wifi and data working it will be on my device for sure.

The Unofficial CyanogenMod Series - added aokp-jellybean test build

Hi all I will be working this a little. But don't expect anything to great. I don't have a whole lot of time to work on this. I bricked my phone and not having much luck getting it replaced. So I won't be working on this to much until I can get a new phone as I will be spending all my time working.
Most stuff posted here is probably gonna be untested.
I will be posting cm7, cm9, and cm10 builds here.
Idk if any of these work.
Don't get mad at me if they brick your device. Infact treat them with a high chance of brickage, unless otherwise noted.
CyanogenMod 7:
Code:
[CENTER]
[B][U][COLOR="Blue"][SIZE="2"]Download:[/SIZE][/COLOR][/U][/B]
[URL="https://www.dropbox.com/s/1ct15i6fxbprpjj/cm-7-20120720-UNOFFICIAL-captivatemtd.zip"]cm-7-20120720-UNOFFICIAL-captivatemtd.zip[/URL]
[B][U][SIZE="2"][COLOR="Blue"]Google Apps for Gingerbread:[/COLOR][/SIZE][/U][/B]
[URL="http://goo.im/gapps/gapps-gb-20110828-signed.zip"]gapps-gb-20110828-signed.zip[/URL][/CENTER]
CyanogenMod 9:
Code:
[CENTER][B][U][COLOR="Blue"][SIZE="2"]Downloads:[/SIZE][/COLOR][/U][/B]
[URL="https://www.dropbox.com/s/p0n6myyedm7pyx4/cm-9-20120720-UNOFFICIAL-captivatemtd.zip"]cm-9-20120720-UNOFFICIAL-captivatemtd.zip[/URL]
[B][U][SIZE="2"][COLOR="Blue"]Google Apps for ICS:[/COLOR][/SIZE][/U][/B]
[URL="http://goo.im/gapps/gapps-ics-20120429-signed.zip"]gapps-ics-20120429-signed.zip[/URL][/CENTER]
CyanogenMod 10:
Code:
[CENTER][B][U][COLOR="Blue"][SIZE="2"]Download:[/SIZE][/COLOR][/U][/B]
[URL="http://www.mediafire.com/?ndt440n4ux0ctaz"]cm-10-20120727-UNOFFICIAL-captivatemtd.zip[/URL]
[B][U][COLOR="Blue"][SIZE="2"]Old builds:[/SIZE][/COLOR][/U][/B]
[URL="http://www.mediafire.com/?2n75vev3qvcl417"]cm-10-20120723-UNOFFICIAL-captivatemtd.zip[/URL]
[URL="http://www.mediafire.com/?d89z35acc2cpaxr"]cm-10-FIXED_RECOVERY-captivatemtd.zip[/URL]
[SIZE="2"][B][U][COLOR="Blue"]Google Apps for JellyBean:[/COLOR][/U][/B][/SIZE]
[URL="http://goo.im/gapps/gapps-jb-20120726-signed.zip"]gapps-jb-20120726-signed.zip[/URL]
[URL="http://www.mediafire.com/?xje9p4hl1qv56qz"]inverted_gapps2-jb-20120715.zip[/URL]
[/CENTER]
Recovery:
Code:
[CENTER][B][U][SIZE="2"][COLOR="Blue"]Fake Flashes:[/COLOR][/SIZE][/U][/B]
Touch recovery 6 Fake flash: [URL="http://www.mediafire.com/?k240g28o332apgy"]touch_recovery_fake_flash.zip[/URL]
This is a preview most ways to navigate doesn't work. Normal recovery functions work though
Thanks to:
[URL="http://forum.xda-developers.com/member.php?u=2492461"]sk8erwitskil[/URL] for the source
[/CENTER]
Install instructions:
Code:
[CENTER]Make a backup......
Factory reset........
Mounts and storage > format system.......
Advanced > Wipe Dalvik Cache.......
Install Rom......
Install gapps.....
Reboot......
Go to Rom Manager and fix permissions......
Reboot......
Your all set.........[/CENTER]
Upgrading From a Previous Version:
Code:
[CENTER]Reboot to Recovery
Go to mounts and storage and format system...
Flash latest rom....
If coming from a different build like from cm9 to cm10
then follow the install instructions
When going from cm10 to cm10 flash latest cm10 zip
When going from cm9 to cm9 flash latest cm9 zip[/CENTER]
AOKP- JellyBean test build
Code:
[CENTER][SIZE="3"][B][U]Download:[/U][/B][/SIZE] [URL="http://www.mediafire.com/?9eud3x8c4pq4atd"]
AOKP-JB-captivate-b1.zip[/URL]
[SIZE="3"][B][U]Doesn't work:[/U][/B][/SIZE]
Rom Control force closes Settings
Messaging force closes
Still being tested. Please provide feedback[/CENTER]
cm7 builds:
cm-7-20120720-UNOFFICIAL-captivatemtd.zip
gapps-gb-20110828-signed.zip
Click to expand...
Click to collapse
what's different from Official version this unofficial version?
p.s: sorry for my english
Someone please confirm but I thought releases weren't supposed to be put on xda without the op having a device to test it on? Just curious...
Sent from my SGH-I897 using xda premium
I have this device. I bricked my skyrocket
Sent from my SGH-I897 using Tapatalk 2
levanr said:
what's different from Official version this unofficial version?
p.s: sorry for my english
Click to expand...
Click to collapse
I'm not sure. I just like making my own builds and I figured I'd post them.
Sent from my SGH-I897 using Tapatalk 2
levanr said:
what's different from Official version this unofficial version?
p.s: sorry for my english
Click to expand...
Click to collapse
"unofficial" is beta version that has some problem, "official" is perfect version that has no problem.
gmillz said:
Hi all I will be working this a little. But don't expect anything to great. I don't have a whole lot of time to work on this. I bricked my phone and not having much luck getting it replaced. So I won't be working on this to much until I can get a new phone as I will be spending all my time working.
Most stuff posted here is probably gonna be untested.
I will be posting cm7, cm9, and cm10 builds here.
Idk if any of these work.
Don't get mad at me if they brick your device. Infact treat them with a high chance of brickage, unless otherwise noted.
Click to expand...
Click to collapse
-Downloading
If they wont work... you need a logcat or something .. am I right ?
How to install: ?
Features: ?
Sent from my GT-I9000 using xda premium
Are these the same available on get.cm?
unnecessary (sorry)
Sent from my GT-I9000 using Tapatalk 2
Gore785 said:
How to install: ?
Features: ?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
if you dont understand how to install please leave the area lol
What's the point of this thread?
CheesyNutz said:
if you dont understand how to install please leave the area lol
Click to expand...
Click to collapse
I've honestly lost count of all your posts that offer absolutely nothing helpful or relevant to the discussion.
I understand theres not much of a point to this. The main reason for this thread is cm10 as all the other cm10 roms don't have the stock cm kernel. But since I build the other ones anyways i figured I'd post them. And I'll post install instructions.
kevinnol said:
-Downloading
If they wont work... you need a logcat or something .. am I right ?
Click to expand...
Click to collapse
Definitely. Logcats would be great
CheesyNutz said:
if you dont understand how to install please leave the area lol
Click to expand...
Click to collapse
Meant that as in anything we should do in specific before, during, or after install Like fix permissions?
Sent from my GT-I9000 using xda premium
johnnyrichter said:
What's the point of this thread?
I've honestly lost count of all your posts that offer absolutely nothing helpful or relevant to the discussion.
Click to expand...
Click to collapse
gmillz said:
I understand theres not much of a point to this. The main reason for this thread is cm10 as all the other cm10 roms don't have the stock cm kernel. But since I build the other ones anyways i figured I'd post them. And I'll post install instructions.
Click to expand...
Click to collapse
So...if you understand there's not much of a point, why post at all? Also, FYI, in regard to your OP: "to" is not the same as "too", and "infact" is not a word. Just sayin'.
adzidek said:
So...if you understand there's not much of a point, why post at all? Also, FYI, in regard to your OP: "to" is not the same as "too", and "infact" is not a word. Just sayin'.
Click to expand...
Click to collapse
Because this is the only cm10 rom with the stock cm kernel. I meant there was not much reason to post any of the other builds
gmillz said:
Because this is the only cm10 rom with the stock cm kernel. I meant there was not much reason to post any of the other builds
Click to expand...
Click to collapse
You'll likely receive a lot of flak over re-hosting/posting stuff as you've seen thus far, but if you're offering something you've re-worked in any way(which is what I understand you're doing) then I'd stick with just that and link to other threads in your OP if necessary.
If you compiled from CM10 source here we have CM10 kernel for Captivate (no datadata partition).
This is very interesting.
Thank you very much: if compiling went well this is really an important step for JB on Cappy and now we can run also official Pawitp builds.
Monfro said:
If you compiled from CM10 source here we have CM10 kernel for Captivate (no datadata partition).
This is very interesting.
Thank you very much: if compiling went well this is really an important step for JB on Cappy and now we can run also official Pawitp builds.
Click to expand...
Click to collapse
Yes this is compiled from source specifically for the captivate.
And compiles with no errors

[ROM] Unofficial CM10 for the A500/A501

WARNING: THIS IS SUPER EXPERIMENTAL!!! DON'T FLASH THIS TO YOUR TABLET IF YOU DON'T KNOW WHAT YOU ARE DOING!!!
What works:
Wi-Fi
Touchscreen
Browser
Play Store
SuperSU & Root access
Lots of other stuff, just haven't tested it quite yet.
What dosen't:
Media (Video & Sound)
/mnt/sdcard and /sdcard point to external sd, not internal memory.
Bootloop fixed in 7/25/12 build!
You tell me
This also requires the unlocked ICS bootloader. This will not run on the honeycomb bootloader. ICS bootloader installation instructions: http://forum.xda-dev...d.php?t=1622425
Download ROM (Updated 7/25/12)
Download gapps
Thanks to these guys and these guys.
jellybellys said:
Don't feel like posting everything here, so here:
ALL INFO & DOWNLOADS
Click to expand...
Click to collapse
Why don't we use the already existing one on the forums here?
http://forum.xda-developers.com/showthread.php?t=1792618
Seems more developed, and doesn't bootloop?
I'm fine with different versions of ROMs, but you guys should team up with the cm10 development we have going on here with some developers with great talent, waydownsouth, randomblame, gh123man and others.
EDIT:
This is the same work as the current cm10 ROM on the forums, this should be deleted for duplicate ROM posted.
Sent from my A500 using xda app-developers app
lifeofcoding said:
I'm fine with different versions of ROMs, but you guys should team up with the cm10 development we have going on here with some developers with great talent, waydownsouth, randomblame, gh123man and others.
EDIT:
This is the same work as the current cm10 ROM on the forums, this should be deleted for duplicate ROM posted.
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
This is a different ROM from theirs.
Currently working on getting it running better. Next build should have a lot of fixes.
Oh, well I said that be cause you give credit to this:
https://github.com/iconia-dev
Which is the work of the same people making the other current cm10 ROM.
Unless you plan on improving and fixing you're self..
Sent from my A500 using xda app-developers app
3G Modem for A501 is working too?
Lmao thinkm this thread has been dis-owned and someone has red face lmao
*yourself
lifeofcoding said:
Oh, well I said that be cause you give credit to this:
Unless you plan on improving and fixing you're self..
Click to expand...
Click to collapse
jellybellys said:
WARNING: THIS IS SUPER EXPERIMENTAL!!! DON'T FLASH THIS TO YOUR TABLET IF YOU DON'T KNOW WHAT YOU ARE DOING!!!
Click to expand...
Click to collapse
Somehow I started having flashbacks to the days of the "Manhattan Project".
But alas.... No fireworks or major explosions. Not even a small flicker..... :crying:
Considering the lack of any other input from the OP, I'll put in a close or delete order.
D3v17 said:
3G Modem for A501 is working too?
Click to expand...
Click to collapse
I seriously doubt it Why it's labeled for the 501, I can only wonder.....
MD
Moscow Desire said:
I seriously doubt it Why it's labeled for the 501, I can only wonder.....
MD
Click to expand...
Click to collapse
Yes i also doubt
Before i ever test flash rom JB another thread, and 3G Modem for A501 not working. Only wifi is working.
Thx
Sent from my A501 using XDA Premium HD app
please dont advertise a501 compat when 3g isnt functionnal. a501 users already have a hard time looking through this a500 forum --;
jellybellys said:
This is a different ROM from theirs.
Currently working on getting it running better. Next build should have a lot of fixes.
Click to expand...
Click to collapse
How different? Any changelog?
i seriously think this is useless

[TEST IT]Builiding ChaOS rom

hello fellas i am trying to build ChaOS rom for dhd and if anyone of you here can test the rom if it boots up and give me logcat that would be very helpful
http://d-h.st/Hbm
cyb3r.pr3dat0r said:
hello fellas i am trying to build ChaOS rom for dhd and if anyone of you here can test the rom if it boots up and give me logcat that would be very helpful
http://d-h.st/Hbm
Click to expand...
Click to collapse
illl try to flash this..
Will try and flash this
Sent from my HTC Desire HD using xda premium
xdagee said:
Will try and flash this
Sent from my HTC Desire HD using xda premium
Click to expand...
Click to collapse
does not boot. stucked in the boot logo.
how to get a logcat?
No info on the rom, developer approached me with a pm message, doesn't work as other say, it's not in the proper place just in general not to mention the nickname of the "developer"
..I wouldn't test it, something smells fishy
evronetwork said:
No info on the rom, developer approached me with a pm message, doesn't work as other say, it's not in the proper place just in general not to mention the nickname of the "developer"
..I wouldn't test it, something smells fishy
Click to expand...
Click to collapse
Lol lol dont be afraid of me, if you searched about ChaOS then you would have known what i am talking about
http://www.chameleonos.org/
And what have i builded here and if you looked inside Zip you could have seen that its a ROM , and I pm'ed you because i saw you were testing Roms all over dhd section
Leozaors said:
does not boot. stucked in the boot logo.
how to get a logcat?
Click to expand...
Click to collapse
Check if adb working then try logcat using adb
Sent from my HTC M7 using Tapatalk
cyb3r.pr3dat0r said:
Lol lol dont be afraid of me, if you searched about ChaOS then you would have known what i am talking about
http://www.chameleonos.org/
And what have i builded here and if you looked inside Zip you could have seen that its a ROM , and I pm'ed you because i saw you were testing Roms all over dhd section
Check if adb working then try logcat using adb
Sent from my HTC M7 using Tapatalk
Click to expand...
Click to collapse
i will try this http://forum.xda-developers.com/showthread.php?t=2324411
Leozaors said:
i will try this http://forum.xda-developers.com/showthread.php?t=2324411
Click to expand...
Click to collapse
Lets make this rom alive for DHD
Sent from my HTC M7 using Tapatalk
Leozaors said:
i will try this http://forum.xda-developers.com/showthread.php?t=2324411
Click to expand...
Click to collapse
adb not working on chameleon logo..
recovey recongnizes this rom as mokee cedartics port
Hey guys took a look at the thread I love the community trying to make ChaOS a reality... The ROM show's up like that because the dev is probably using my ROM as a base... although my ROM isn't the best base for an unofficial port. Better use randomblame's it's cleaner . Now about the not booting up. I am guessing it is failing to intialize the framework due to a kernel issue. I can fix and make a ChaOS compatible kernel... I will try to do it by tomorrow. Dev please PM me to tell me what development procedures have gone on. Also ChaOS uses the MIUI theming engine so I am guessing some special libs and other stuff must be transplanted into the base. I can also take a look into it if the dev gives me the point of starting Hope you all have a good day
CedArctic said:
Hey guys took a look at the thread I love the community trying to make ChaOS a reality... The ROM show's up like that because the dev is probably using my ROM as a base... although my ROM isn't the best base for an unofficial port. Better use randomblame's it's cleaner . Now about the not booting up. I am guessing it is failing to intialize the framework due to a kernel issue. I can fix and make a ChaOS compatible kernel... I will try to do it by tomorrow. Dev please PM me to tell me what development procedures have gone on. Also ChaOS uses the MIUI theming engine so I am guessing some special libs and other stuff must be transplanted into the base. I can also take a look into it if the dev gives me the point of starting Hope you all have a good day
Click to expand...
Click to collapse
we love mokee , okay will rebase on rb's cm 10.1 and reupload , what mod does kernel needs for Chaos?
Sent from my HTC M7 using Tapatalk
I'd recommend firstly this topic to be moved to DHD Development, and secondly the first post is for introducing the rom
This seems a bit off as it is right now
..Just my advice
CedArctic said:
Hey guys took a look at the thread I love the community trying to make ChaOS a reality... The ROM show's up like that because the dev is probably using my ROM as a base... although my ROM isn't the best base for an unofficial port. Better use randomblame's it's cleaner . Now about the not booting up. I am guessing it is failing to intialize the framework due to a kernel issue. I can fix and make a ChaOS compatible kernel... I will try to do it by tomorrow. Dev please PM me to tell me what development procedures have gone on. Also ChaOS uses the MIUI theming engine so I am guessing some special libs and other stuff must be transplanted into the base. I can also take a look into it if the dev gives me the point of starting Hope you all have a good day
Click to expand...
Click to collapse
based on Random Blame's CM10.1
http://www.uploadzeal.com/sgcmw5te7snc
Leozaors said:
does not boot. stucked in the boot logo.
how to get a logcat?
Click to expand...
Click to collapse
see if this one is working
cyb3r.pr3dat0r said:
see if this one is working
Click to expand...
Click to collapse
Can't test at the moment. Where are you porting from btw so I can mod the kernel appropriatelly.
downloading now..
same error.
stucked on bootlogo..
CedArctic said:
Can't test at the moment. Where are you porting from btw so I can mod the kernel appropriatelly.
Click to expand...
Click to collapse
Htc ville
Sent from my HTC M7 using Tapatalk
Leozaors said:
downloading now..
Click to expand...
Click to collapse
And if it gets bootlooped please try logcat
Sent from my HTC M7 using Tapatalk
same error
Leozaors said:
same error
Click to expand...
Click to collapse
CedArctic said:
Can't test at the moment. Where are you porting from btw so I can mod the kernel appropriatelly.
Click to expand...
Click to collapse
So its framework causing problem can you build modded kerner? I m using cos-0.6 from One S(ville)

[ROM] official CyanogenMod nightly arrives for the Moto g!

"Moto G*users now have an official*CyanogenMod*option available. This one is a nightly, and currently available for select Moto G models. Specifically, the folks at Cyanogen have released this nightly build for the XT1031, XT1032, and XT1034 model numbers. Basically, the single-SIM retail versions of the Moto G."
Download: http://download.cyanogenmod.com/?device=falcon
Source: Android Central
http://androidcommunity.com/cyanogenmod-nightly-build-arrives-for-the-moto-g-20140219/
Sent from my Nexus 7 using Tapatalk
And it's all thanks to @dhacker29
Sent from my Moto G using Tapatalk
Who has tried it?
I'm unsure what to flash on my device, this ROM or Nexus G+?
Ill try it with XT1033! Anybody already did?
wrong forum section!
Sent from my Moto G using XDA Premium 4 mobile app
Testing with pink kernel as we speak. Overclocked to 1.6ghz (didn't think it was possible), with art and GPU rendering.
I've got to say I thought stock was fast but this is awesome. My free ram has increased by about 300mb with the same apps which is making a big difference.
Will report back tomorrow but no issues so far
Sent from my Moto G using XDA Premium 4 mobile app
When trying to install the nightly, after the first reboot I get the Error:
Encryption Unsuccessful . Only option: reset phone
When I do so, I land in a loop with this error again...
Any ideas?
Someone knows if the magnet unlock of the flipshell still work with the rom ?
well,why not open this thread at general section? you're a senior member right?i think you should know this
Don't wanna sound harsh or anything but this thread is pointless, especially on development section.
Doublepranks said:
Don't wanna sound harsh or anything but this thread is pointless, especially on development section.
Click to expand...
Click to collapse
My thoughts exactly. Everybody who would care already knows about this from the actual CyanogenMod thread.
ohn42 said:
When trying to install the nightly, after the first reboot I get the Error:
Encryption Unsuccessful . Only option: reset phone
When I do so, I land in a loop with this error again...
Any ideas?
Click to expand...
Click to collapse
had this issue once, didnt cleared the data/cache before flashing. maybe same with you. try doing so.
SeannyM said:
My thoughts exactly. Everybody who would care already knows about this from the actual CyanogenMod thread.
Click to expand...
Click to collapse
Can you link me to that thread, please?
Sent from my XT1032 using XDA Premium 4 mobile app
Sayestlow said:
Someone knows if the magnet unlock of the flipshell still work with the rom ?
Click to expand...
Click to collapse
Does MMS work in it??
Support thread for Cyanogenmod 11 for Moto G
ajitsonlion said:
had this issue once, didnt cleared the data/cache before flashing. maybe same with you. try doing so.
Click to expand...
Click to collapse
Not working for me.
Still the same error...
nice!
i think now it is time for MIUI !

Categories

Resources