4.3 cm-10.2 - Droid RAZR M Q&A, Help & Troubleshooting

Has anyone tried the 4.3 cm10.2 ROMs found over here (http://androidhosting.org/Devs/Dhacker29/cm-10.2/)? I was going to give it a go last night but for some reason my device got stuck on the "warning your boot loader is unlocked" screen and had to use Matt's utility to give it life... I may give it a try tonight when I'm not expecting any calls...
Sent from my XT907 using xda app-developers app

Yeah, I'm running the latest version of it now. I had the same problem. What worked for me was the following:
1. Wipe everything - system, data and both types of cache.
2. Install CM 10.2 and NOTHING else. Boot the ROM. It should go through now.
3. Once you get to the main screen, reboot into recovery.
4. Install the 4.3 GAPPS version. Reboot, get to the main screen and reboot into recovery.
5. Now flash the 4.3 version of Supersu for CM 10.2
6. Boot one last time into CM 10.2
All the links for everything you need can be found with a Google search. Later I may edit this post to include those links.
Sent from my XT907 using Tapatalk 4

Thank you kindly for the reply... I got it booting finally but couldn't get su permission on TiB and what not... I didn't know about needing the 4.3 su ...I'll flash that now... again thank you kindly
Sent from my XT907 using xda app-developers app

TWRP isn't supported either from what I understand. You need to run CWM.

Any time I install 4.3, it won't reboot. It starts up initially, but I can't get it to get past the Motorola logo upon second boot.
I have tried the normal install method and this method.
Then recovery doesn't see the /data folder so something is wrong with the 4.3 install I presume.
Does it change the location of data?

Yeah I Tried It But It Had No Sound So I Changed Over To 4.2.2 AOKP.

grtechguy said:
TWRP isn't supported either from what I understand. You need to run CWM.
Click to expand...
Click to collapse
I was using CWM on my first attempt... this time around I switched to TWRP...
Sent from my XT907 using xda app-developers app

grtechguy said:
TWRP isn't supported either from what I understand. You need to run CWM.
Click to expand...
Click to collapse
I use TWRP, works ok. Got sound, data, everything working fine. Battery life sucks, but no surprise there.

My 2c
I'm running it right now. I must have missed the part about flashing SuperSu, because I can't do anything as root. I had trouble the first time I flashed with the phone bootlooping, but I flashed again and that fixed it. Battery life is somewhat poor, but I just found the performance page today (Icon was different, silly me!) so we'll see how it goes with a different governor. I've been having issues with Navigation and Bluetooth audio on anything except stock. Bluetooth audio locks the phone and I have to soft-reset it. Navigation crashes if you try to multi-task while using it.

Related

Updated SmoothROM and my Nexus 7 stopped working! Can't get back into recovery.

I have had my Nexus 7 with SmoothROM on it for a long time now, I use it here and there, but I noticed it acting kind of glitchy lately especially when using the keyboard. I got 2 notifications from GROUPER (i think thats the name of it...) saying I had an update to SmoothROM (v 4.2) and that google apps needed to be updated... I did the normal crap, wiped everything, flashed the new smoothrom, flashed on the google apps, but when I rebooted it just keeps popping up saying "Unfortunately, the process blah blah gapps has stopped", then when i press ok it says Unfortunately, Setup Wizard has stopped".... and when i press ok on that it just keeps popping back up... will NOT go away no matter what I try...
On top of this... I tried going to fastboot and putting it in recovery mode but then it just goes to the main boot screen that says Google with a lock at the bottom, and it is just stuck there...
So what would be the easiest course of action here? I can't get it into Recovery mode I don't think, although I forgot how to do it in the first place, I thought it had to do with sliding the lock somewhere at the boot screen but I have tried that and nothing seems to work...
ANY HELP WOULD BE GREATLY APPRECIATED!
Update: I managed to get into the settings and put USB Debugging on
so now it gets recognized by my computer and I can view and transfer files.... But I still can't get it into recovery mode so what should I do now lol?
Should I be looking for something like this " Google Nexus 7 Toolkit V3.2.0 " ?
Use wugs to restore to stock and start over
If you go back to smoothrom make sure you download it again might have been a bad download
Sent from my Nexus 7 using Tapatalk 2
When you power on your nexus press volume down and up and power button together for a couple of seconds. Your screen will go off and then "Google" will come up. Continue pressing and you will be in the boot loader menu. Go to recovery and install the ROM you want. (Can you get there?) Or else try to install it from your PC with cmd. Let me know if the first way works.
Sent from my Nexus 7 using xda app-developers app
Same here, I dirty flashed it from stock instead of full wipe. Always do full wipe just in case.
Sent from my Nexus 7 using xda app-developers app
is the lock under the Google logo open or closed? if you installed a custom ROM, it should be open. if it is closed, the bootloader somehow got locked again.
however, i think the issue you are experiencing is related to gapps. you either have a bad download of gapps or flashed the wrong gapps (some roms require custom gapps). try the volume down+power thing to get to the bootloader, then go to recovery. if you can't, flash a recovery using fastboot or use one of those toolkits to flash a recovery. before you re-flash your ROM and gapps, i'd recommend verifying the MD5 sum, since that will tell you whether the downloaded file is good or not.
Sorry for the late reply guys but as it usually goes my ADHD got the best of me and before I came back to read this i ended up using that Google toolkit thing that I asked about and did what somebody said (option 9) to download and then install the stock ROM (but thank you!!) BUT in case anybody would like to know the lock was open and I could put it in fastboot but it wouldn't boot me into recovery. Hopefully anybody else updating smoothrom that ends up in my position will find this thread. I also suggest just downloaded the ROM and flashing it with the recovery that was my first time using that update ROM thing and it screwed up lol.
Again thanks a ton! Is there any new ROMs out there for the Nexus 7? Anything better than SmoothROM (or stock, lol)?
Sent from my Nexus 7 using xda app-developers app
Is there any new ROMs out there for the Nexus 7? Anything better than SmoothROM (or stock, lol)?
Sent from my Nexus 7 using xda app-developers app
Rasbeanjelly with Franco kernel. I think it's the best out there.. I got 5k on quadrant with no overclock anywhere. Games play with no lag, it's very good
Sent from my Nexus 7 using xda app-developers app
Maybe I'll try that... I'm gonna do quadrant right now I DLed it right after I got stock on but haven't tested it yet
Sent from my Nexus 7 using xda app-developers app
I have seen a huge difference also in the overall speed of the system, very responsive and fast every second you should try it out
Sent from my Nexus 7 using xda app-developers app

[Q] Rooted, CM 10.1, clean rom, now stuck...need help!

Hey, I could really use some guidance here. I'll present the information as simply as I can:
I bought a Galaxy s4 AT&T a few days ago. I've been interested in rooting and flashing different roms, but I think I may have done a bit too much.
I rooted using the motochopper method - great, worked like a charm.
I made a backup of my original rom using CWM. I even took that backup and saved a copy of it on my Mac - perfect.
I thought I'd try Cyanogenmod 10.1, so I downloaded the latest nightly build and flashed it using CWM - so far so good.
Everything was working fine, but my LTE (or any data) was not working at all. I could use Wifi, but once I turned wifi off, I had no data, no gps, no 3g, no 4g, no LTE. I tried the *#*#4636*#*# method, the LTEOnOff app, and changing my APN based on the recommendations provided in this thread - I just couldn't get it to work.
I thought I'd try restoring my original backup, but when I went into CWM to do so, it said that my backup could not be found...(I still have a backup on my computer, just in case)
I needed my phone to work, and badly needed LTE to do so. So, I downloaded this rom: [ROM] CleanROM 1.0 -★| Clean and Smooth! | The Way Nature Intended! |★-
So far, this rom was working fine - it's just a debloated version of TouchWiz - which I like. But, here's my problem now - If my phone reboots, it stays frozen on the Samsung logo (with unlocked lock logo underneath), and I can't get past it. I'd have to go BACK into recovery, and flash the CleanROM all over again, and set my phone up as new with all data wiped.
I really need my phone to work again, and I don't know where to go from here. What options do I have left? What can I do to get out of that frozen Samsung loading screen? Can't I just reset my phone to the way it was? Can't the CM10.1 rom work with LTE?
Your help will be greatly appreciated.
Your best option is to flash the stock MDB firmware via odin . After you get the PASS on Odin go ahead and manually boot into stock recovery and wipe data factory reset again then reboot. You will have to re root and reinstall recovery but this will take care of any issues you had from a bad flash.
http://forum.xda-developers.com/showthread.php?t=2261573
Sent from my GT-I9505G using Tapatalk 2
mavverick said:
Hey, I could really use some guidance here. I'll present the information as simply as I can:
I bought a Galaxy s4 AT&T a few days ago. I've been interested in rooting and flashing different roms, but I think I may have done a bit too much.
I rooted using the motochopper method - great, worked like a charm.
I made a backup of my original rom using CWM. I even took that backup and saved a copy of it on my Mac - perfect.
I thought I'd try Cyanogenmod 10.1, so I downloaded the latest nightly build and flashed it using CWM - so far so good.
Everything was working fine, but my LTE (or any data) was not working at all. I could use Wifi, but once I turned wifi off, I had no data, no gps, no 3g, no 4g, no LTE. I tried the *#*#4636*#*# method, the LTEOnOff app, and changing my APN based on the recommendations provided in this thread - I just couldn't get it to work.
I thought I'd try restoring my original backup, but when I went into CWM to do so, it said that my backup could not be found...(I still have a backup on my computer, just in case)
I needed my phone to work, and badly needed LTE to do so. So, I downloaded this rom: [ROM] CleanROM 1.0 -★| Clean and Smooth! | The Way Nature Intended! |★-
So far, this rom was working fine - it's just a debloated version of TouchWiz - which I like. But, here's my problem now - If my phone reboots, it stays frozen on the Samsung logo (with unlocked lock logo underneath), and I can't get past it. I'd have to go BACK into recovery, and flash the CleanROM all over again, and set my phone up as new with all data wiped.
I really need my phone to work again, and I don't know where to go from here. What options do I have left? What can I do to get out of that frozen Samsung loading screen? Can't I just reset my phone to the way it was? Can't the CM10.1 rom work with LTE?
Your help will be greatly appreciated.
Click to expand...
Click to collapse
Factory Reset
Wipe Cache
Wipe Dalvik
Format /system
Flash ROM or ROM and gapps if AOSP
Reboot
KingKongDingDong said:
Factory Reset
Wipe Cache
Wipe Dalvik
Format /system
Flash ROM or ROM and gapps if AOSP
Reboot
Click to expand...
Click to collapse
Having the same issue so I figured I'd give these steps a shot. Followed them exactly and phone (AT&T S4, TWRP) would won't even reboot the first time into CleanROM. I'm stuck on the Samsung screen with the lock.
edit: I've noticed that now, when I reboot into TWRP, it prompts me for a password. Hitting cancel takes me to the regular home screen, but I had not been getting the password prompt before attempting to install CleanROM. A permissions issue, perhaps?
edit 2:
I've just spent some time trying a bunch of things with bits of good luck surrounded with tons of bad. Below are the steps I've taken to try to get CleanROM to boot (and reboot) without any issues. Hopefully they help figure out the issues we're having.
Wipe Cache
Wipe Dalvik
Wipe /system
Flash CleanROM
Reboot
---- Failed
Reboot into Recovery
Prompted for password, hit cancel
Fix permissions
---- Failed
Reboot to recovery
Prompted for password, hit cancel
Format data (type yes)
Reboot
---- Successfully booted to CleanROM
Ran through phone / account setup
Saw home screen
Powered off and then back on (not using reboot)
---- Failed
Reboot to Recovery
No longer prompted for password
Factory Reset
Attempt to Fix Permissions: failed
Restore default settings
Reboot system
---- Failed
Reboot to Recovery
Prompted for Password, hit cancel
Format Data (type yes)
Reboot System
--- Successfully booted to CleanROM
Ran through phone / account setup
Saw home screen
Reboot (using reboot, not power off / on)
---- Failed
Reboot to Recovery
Prompted for password, hit cancel
Factory Reset: failed
Restore Default settings
Prompted for password, hit cancel
Factory Reset: failed
* Internal Storage showing 0MB (as if it's not reading it correctly)
Fix Permissions
Prompted for password, hit cancel
Nothing has changed, my phone is currently chilling in TWRP
MJHawaii said:
Your best option is to flash the stock MDB firmware via odin . After you get the PASS on Odin go ahead and manually boot into stock recovery and wipe data factory reset again then reboot. You will have to re root and reinstall recovery but this will take care of any issues you had from a bad flash.
http://forum.xda-developers.com/showthread.php?t=2261573
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
This. You decided to ignore this post for some reason.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
cuffed zhesea
Cataligh said:
This. You decided to ignore this post for some reason.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I can't speak for OP, but I was hoping there was another way to rectify what has already been done without flashing stock seeing as how I'm on OSX. If that's the only option, then so be it.
Hey. Thanks for the feedback in this thread. I flashed factory through Odin, and everything is working fine. I then factory reset my phone through factory recovery. I'm back to standard touchwiz with all the bloat lol.
I'm going to wait until there a more stable release of cm10.1 - that was a good rom.
Appreciate all the help people!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Your best bet is do what "cataligh" mentioned... flash back to stock via odin...
Sent from my SAMSUNG-SGH-I337 using xda premium
When you flashed cm10 it probably wipe the internal sdcard, you should ALWAYS do you backups to the extsdcard...period.
TheAxman said:
When you flashed cm10 it probably wipe the internal sdcard, you should ALWAYS do you backups to the extsdcard...period.
Click to expand...
Click to collapse
Yeah, absolutely! I always backed up and flashed roms from my external SD.
mavverick said:
I'm going to wait until there a more stable release of cm10.1 - that was a good rom.
Click to expand...
Click to collapse
waiting is for simpletons. get aokp and transcend...
jaboles said:
I can't speak for OP, but I was hoping there was another way to rectify what has already been done without flashing stock seeing as how I'm on OSX. If that's the only option, then so be it.
Click to expand...
Click to collapse
As I mentioned before starting over is always the Best and Safe way to go. Shortcuts will only cause you headaches and possibly get you a brick that is why you see Odin stock threads. Do yourself a favor and start over I know it sucks but when your modifying your phones its gonna happen once in awhile.
Sent from my GT-I9505G using Tapatalk 2
MJHawaii said:
As I mentioned before starting over is always the Best and Safe way to go. Shortcuts will only cause you headaches and possibly get you a brick that is why you see Odin stock threads. Do yourself a favor and start over I know it sucks but when your modifying your phones its gonna happen once in awhile.
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
Wise words. Took your advice, installed Windows with boot camp, and got back to stock via odin.
I am going to say something about this thread, we are all giving advice on how to do this and that, and not once is it mentioned anywhere....in the OP
WHAT DEVICE WE ARE TALKING ABOUT! PLEASE STATE THE DEVICE WHEN NEEDING HELP!
The Ax says, I apologize if I missed what device.
TheAxman said:
I am going to say something about this thread, we are all giving advice on how to do this and that, and not once is it mentioned anywhere....in the OP
WHAT DEVICE WE ARE TALKING ABOUT! PLEASE STATE THE DEVICE WHEN NEEDING HELP!
The Ax says, I apologize if I missed what device.
Click to expand...
Click to collapse
My original question was for the AT&T version of the Galaxy S4 - i337.
xBeerdroiDx said:
waiting is for simpletons. get aokp and transcend...
Click to expand...
Click to collapse
Welllllll I just tried installing AOKP as well (Task650). Buttttttt, same issue with the LTE stuff. I tried reviewing all the APN settings, but didnt get any data connection on my phone except for wifi.
mavverick said:
Welllllll I just tried installing AOKP as well (Task650). Buttttttt, same issue with the LTE stuff. I tried reviewing all the APN settings, but didnt get any data connection on my phone except for wifi.
Click to expand...
Click to collapse
What APN settings were you using?
Sent from my SAMSUNG-SGH-I337 using xda premium
doktor buknasty said:
What APN settings were you using?
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Yeah, data was enabled - and I was using ATT LTE apn settings that I found on these forums. I made sure to use the right now. Plus, when I rebooted my phone, it got stuck on the Samsung lock screen again...
Juuuuust ODINed back to factory right now for the second time :crying:
Was it these settings:
Sent from my SAMSUNG-SGH-I337 using xda premium
doktor buknasty said:
Was it these settings:
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Yes, those were the exact settings that I used. Is it possible that I could have a defective phone or sim card?
Right now, I am on factory touchwiz with root enabled, and my phone is working perfectly fine. I can reboot, use LTE, everything. The problem starts when I load any CM or AOKP rom...

HOW TO Install CM 10.2 (Android 4.3) for Razr M (xt907)

I am running CM 10.2 by Skrilax - http://skrilax.droid-developers.org/cm10.2nightly/razrqcom/index.php?device=xt907 (Might be fine with the DHacker version also, but this is what I used.
Pretty much everything seems to work including GPS. I do not have Bluetooth anything so I can't speak to that. Some (maybe most) people seem to have difficulty getting it installed, but it can be done. There are a few tricks to it. Here's what worked for me:
I highly recommend using TWRP 2.6.0 as that's what I use and I know it works. Not sure whether other recoveries will function the same or not.
What you need:
1. The most recent version of CM 10.2 from the link above.
2. Gapps Core 4.3 - http://goo.im/devs/BaNkS/GApps 4.3
3. Root for 4.3 - http://download.chainfire.eu/342/SuperSU/UPDATE-SuperSU-v1.43.zip
1. Erase everything except the external sdcard. Do it three times. (Don't ask, just do it.)
2. Also Format Data - what the heck, do that 3 times too.
3. Install the CM 10.2 ROM, wipe dalvik and cache again and reboot into the system. DO NOT install anything else at this time for best results.
4. Let the OS boot all the way to the desktop.
5. Unlock the developer options by going into Settings\About Phone and tapping 8 times on Build number. (Only needs done one time, updates do not hide it again.)
6. In Developer options, change Root Access to "Apps and ADB". (Go ahead and set up whatever else you want in Settings.Do not install any apps or updates at this time.)
7. Reboot into Recovery. Install Gapps Core 4.3
8. Clear dalvik and cache and reboot into System. If it hangs on the Motorola logo, get back into Recovery and format data again. (This is why I said don't install apps or updates yet.)
9. Once the phone boots all the way, reboot into Recovery again and install Root using Supersu 1.43.
10. Clear dalvik and cache and reboot into System. If it hangs on the Motorola logo, get back into Recovery and format data again. (This is why I said don't install apps or updates yet.)
11. Once System has booted, you can update SuperSu in the Google Play Store. The first time you open it, it will want to update the binary. It's very important that you choose the option to do it from Recovery. Your phone will reboot into Recovery, update the binary and then boot back into System.
12. Once all this is done, so are you. Restore your apps, allow Google Play to do any updates, and customize the layout to your tastes.
Note: Once you get a successfully installed 10.2 setup, you can dirty flash the nightlies. Always clear dalvik and cache. And always backup your apps before flashing anything if you want to make your life easier.
ENJOY!!!
Going to give it a go with CWM I'll let you know how it goes.
Well I got the rom to work but I could not get it to boot after loading gapps. I tried wiping data but no joy!
Hey, Thanks for the very clear update instructions - I'm now on CM 10.2!
I am not able to successfully root though. SuperSU complains:
"There is no SU binary installed and SuperSU cannot install it. This is a problem!
If you just upgraded to Android 4.3, you need to manualyl re-root - consult the relevant forums for your device!"
I have tried to reflash the SuperSU zip posted here multiple times to no avail...
Thoughts?
EDIT: Solved with http://download.chainfire.eu/345/SuperSU/UPDATE-SuperSU-v1.51.zip
Flashed TWRP and I was able to get it up and running having the same issue with root going to try the file above and I'll update again.
edit
*** the supersu 1.51 file worked for me as well. ***
---------- Post added at 04:43 PM ---------- Previous post was at 03:47 PM ----------
I'm still having issues. I got the root to work but everytime I reboot the device I have wipe data or it hangs on the boot logo.
---------- Post added at 05:02 PM ---------- Previous post was at 04:43 PM ----------
Restored back to carbon rom 1.8. I may try again after a few more dailies are out. As this is my primary device I can not have the issues I saw. Admittedly it may be something that I did wrong and not the rom.
Sent from my XT907 using xda premium
Got this up and running last night and no issues so far for me. I'm wondering though if any custom kernels work with 10.2? I was curious about the vanquishpuppiesn12 kernel.
kensdavid said:
Hey, Thanks for the very clear update instructions - I'm now on CM 10.2!
I am not able to successfully root though. SuperSU complains:
"There is no SU binary installed and SuperSU cannot install it. This is a problem!
If you just upgraded to Android 4.3, you need to manualyl re-root - consult the relevant forums for your device!"
I have tried to reflash the SuperSU zip posted here multiple times to no avail...
Thoughts?
EDIT: Solved with http://download.chainfire.eu/345/SuperSU/UPDATE-SuperSU-v1.51.zip
Click to expand...
Click to collapse
You must not have followed every step exactly. The process I outlined works flawlessly if it is followed exactly. I'm glad you were able to resolve it though. You ended up with the same result and that's what matters!
Sent from my XT907 using Tapatalk 4
Thanks for sharing , make a mark
netizenmt said:
You must not have followed every step exactly. The process I outlined works flawlessly if it is followed exactly. I'm glad you were able to resolve it though. You ended up with the same result and that's what matters!
Sent from my XT907 using Tapatalk 4
Click to expand...
Click to collapse
can you confirm if rear mic is working when taking videos? this has been the only hangup for me on the 4.2.2 ROMs...
I doubt it, since that functionality is probably kernel related, but still just curious...
thanks!
Ok I noticed that I had somehow installed the wrong TWRP I installed 2.6.0 today and I have so far had good luck phone is up and running and seems to be stable. At first I had some issues with a few apps throwing errors during the mass install when I sync'ed with Google but a manual download after and they installed just fine. Also the new camera app called focal has some issues for me it opened and took pics but images in gallery are blank. However the stock camera app seems to working fine at least for stills I have not tried video yet.
I've got this all working too, including root. But I've been noticing about a second delay when pressing power to unlock the phone. Sometimes it delays so long that I press power again. So when the phone does wake up, the screen goes off again from my double press of impatience. I'm running the 0907 nighlty
Sent from my XT907 using XDA Premium 4 mobile app
FWIW, never needed to wipe data multiple times and I flashed everything at once. That said, still a good procedure to follow
Also, @georgeascott, that's a known bug. It tends to SOD on occasion... Not much to do to fix except maybe overclocking
Sent from my XT907 using Tapatalk 4
Any plans for safe strap support? My bootloader is apparently permanently locked. Stock isn't terrible.. You can disable and hide bloatware.. But it would be really nice to have pie instead of soft buttons and restart and screen shot on the power menu
Sent from my XT907 using xda app-developers app
zombolt said:
Any plans for safe strap support? My bootloader is apparently permanently locked. Stock isn't terrible.. You can disable and hide bloatware.. But it would be really nice to have pie instead of soft buttons and restart and screen shot on the power menu
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
Probably not, but you can get some of that functionality with root alone if you know how to mod systemui and stuff like that. Probably not the answer you're looking for but that's probably what it is...
Can always hope someone will Dev for it though
Sent from my XT907 using Tapatalk 4
sloosecannon said:
Probably not, but you can get some of that functionality with root alone if you know how to mod systemui and stuff like that. Probably not the answer you're looking for but that's probably what it is...
Can always hope someone will Dev for it though
Sent from my XT907 using Tapatalk 4
Click to expand...
Click to collapse
I have no clue how to do those things. I got really spoiled on the dinc. So many people spoon feeding contributions to a fabulous device. It sure is a shame it's impossible to unlock my boot loader
Sent from my XT907 using xda app-developers app
everything I've run into *works*
but it all doesn't work so smoothly
Scrolling and everything is kind of choppy, I mean it is definitely livable, but still choppy.
netizenmt,
Thx a lot for your help. I`m now on cm10.2, too.
But there seemed to be some bugs.
1.I cannot install any apps from Google Play Store, or it hangs on the MOTO logo after reboot.
2.I can take calls, but cannot reach the 3G network.
P.S.When I try to use QPST to configure the phone, the QPST tells Serious error encountered, write to phone aborted.
I've installed CM10.2 two weeks ago and everything is working great! The first time I flashed it I got stuck at the CM boot animation... After ten minutes spent watching it I forced it to reboot: stuck again. At this point I booted back to recovery, followed thoroughly netizenmt instructions (wipe three times, really!!!), installed CM10.2, Installed gapps, installed supersu v1.43 and so on (follow all the steps netizenmt told us!)... Everithing worked fine then. At this point I changed build.props to make the phone works in GSM mode.
fargles said:
everything I've run into *works*
but it all doesn't work so smoothly
Scrolling and everything is kind of choppy, I mean it is definitely livable, but still choppy.
Click to expand...
Click to collapse
If you go to settings/developer options and scroll down to HW overlays. Check the box to disable HW overlays. That should help with the tearing/chopping.
Also, maps FC all over the place as soon as you're using GPS.
Sent from my XT907 using xda app-developers app

PLEASE HELP. Boot loops to recovery

I installed the HORSEMAGEDDON ROM and it worked - for the most part. But it kept giving me annoying errors about different apps that were attempting to update every time I turned it on. So I tried to restore my backup that I had made with CWM 6.0.2.8. However the backup apparently did not restore properly because it now boot loops back into CWM any time I try to start it. I get the errors:
E:Can't open cache/recovery/log
E:Can't open cache/recovery/log
E:Can't open cache/recovery/last_log
E:Can't open cache/recovery/last_log
So I tried to reflash HORSEMAGEDDON but it still loops back into the CWM recovery screen.
I have wiped everything according to the instructions on the HORSEMAGEDDON thread.
HELP!! This happened to me on another U8800-51 phone and I wound up hard bricking it trying to get back to stock.
Anybody???
Does anybody have any ideas on how I can fix this?
Did you wipe cache/dalvik cache?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
iheartsamsung said:
Did you wipe cache/dalvik cache?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yes. I did a wipe of data and factory reset as well.
What I would do is get an SD card with a custom rom on it and try installing it from recovery menu
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Obviously you have been having problems with that rom, so go with something different.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
iheartsamsung said:
Obviously you have been having problems with that rom, so go with something different.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Okay. Here is what I did step by step:
1. I was on Stock 2.2.2 Froyo and flashed HORSEMAGEDDON successfully. But I had some errors related to updates since it was such an old ROM the updates were all for much newer versions of the apps tied to 4.x.x.
2. I attempted to restore my backup made with CWM 6 to return to the stock. It said it completed successfully but when I rebooted it just looped into the recovery screen with the error messages posted in my first post.
3. So I tried to reflash HORSEMAGEDDON and it said it completed successfully. But it still bootloops into recovery.
4. I can access most of the features of the recovery. I can access the pink screen and swap recovery versions. I can access my SD card from my PC when I mount it from recovery.
5. Yes, I did do full wipes with each attempt to reflash.
The ROM was not the problem. It worked and worked well other than update issues for apps. It was only after attempting to restore to stock I ran into issues.
The problem appears to be something was corrupted when I tried to restore my backup, even though it said it completed successfully.
So if I try to flash yet another custom ROM, even if I could find one I trust given all of the version issues etc., I don't think it would act any differently. But if somebody can recommend one I am all ears. Keep in mind I have a -51 phone so it will have to be for that or the PRO.
Given that, how can I get back to stock? Am I the only person who has ever had this problem? I don't believe that is the case, so somebody must know how to fix it or can point me to a procedure to repair the internal memory.
Help!!
I'm new at xda so it's not letting me post an external link. Google "bootlooping" and the first one in list is from xda, just follow the instructions
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Thanks but.....
iheartsamsung said:
I'm new at xda so it's not letting me post an external link. Google "bootlooping" and the first one in list is from xda, just follow the instructions
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
None of the fixes on this link seem to apply to my situation.
When I said "bootloop" I may have misused the term. What happens is I power up, it goes to logo screen for about 10 seconds, shuts down and restarts to logo screen then goes into recovery after about 5 seconds. From other info that I have found it is due to a corrupt bootloader and I need to reflash the bootloader. Problem is, reflashing the bootloader i.e. CWM, does no good at all.
I am also hampered by lack of info specific to the -51 model. And I cannot find a copy of the stock ROM anywhere that is for the -51.
So essentially I am screwed. All of that said, I have found a new phone for $40.00 so all is not lost. It's a U8800 but not the -51 or PRO. I don't plan on customizing it, I'll just stick with stock. After trashing two phones even after following the advice to "BACKUP" I think enough is enough. Backing up did me no good whatsoever in both cases.
In my estimation, the culprit is CWM, or at least the versions I used.
If anybody has any advice I'm all ears.

Rom installation issue

Hi guys im having problems installing 4.4 LS and Slim roms on my P705.
I keep getting random reboots, as soon as i install a room it boots up and as soon as the start up menu shows up the phone reboots.
Or it just starts over on half booting, i installed all the roms correctly whip data/whip cach/ whip delvic/mount system/format system.
Installed with gapps and without.
but i can install slimkat or xperia z 4.1.2 and thay work fine.
My CWM version is 6.0.4.9.
Does any one know what the problem may be?
Btw my phone is running on Stock 4.1.2 jb, v20 baseband.
Sent from my LG-P705 using XDA Free mobile app
Nesh89 said:
Hi guys im having problems installing 4.4 LS and Slim roms on my P705.
I keep getting random reboots, as soon as i install a room it boots up and as soon as the start up menu shows up the phone reboots.
Or it just starts over on half booting, i installed all the roms correctly whip data/whip cach/ whip delvic/mount system/format system.
Installed with gapps and without.
but i can install slimkat or xperia z 4.1.2 and thay work fine.
My CWM version is 6.0.4.9.
Does any one know what the problem may be?
Btw my phone is running on Stock 4.1.2 jb, v20 baseband.
Sent from my LG-P705 using XDA Free mobile app
Click to expand...
Click to collapse
Wipe cache, dalvik, data & system.
Mount system, install rom.
Reboot. Do anything. Check if it reboots.
Then reboot to recovery.
Flash a pico gapps. Reboot.
Then check again.
I don't have problem with ls. I've been using it ever since it came out.
vaikz said:
Wipe cache, dalvik, data & system.
Mount system, install rom.
Reboot. Do anything. Check if it reboots.
Then reboot to recovery.
Flash a pico gapps. Reboot.
Then check again.
I don't have problem with ls. I've been using it ever since it came out.
Click to expand...
Click to collapse
did all that, some how still the same problem, im still not getting a better idea.
Sent from my LG-P705 using XDA Free mobile app
Nesh89 said:
did all that, some how still the same problem, im still not getting a better idea.
Sent from my LG-P705 using XDA Free mobile app
Click to expand...
Click to collapse
Sorry for late reply, try flash recovery from thread or CM11 thread again.
Nesh89 said:
did all that, some how still the same problem, im still not getting a better idea.
Sent from my LG-P705 using XDA Free mobile app
Click to expand...
Click to collapse
Work or not?
Paget96 said:
Work or not?
Click to expand...
Click to collapse
tryed flashing recovery agen, but nothing, then i flashed Philz cwm 6.0.5.1 by IMER. But still nothing.
After the last flash i culdnt get in to cwm when i press the button conbination the phone vibrated but stayd off.
But i solved that problem by removing the battery and conecting to the charger holding the button combo.
I was able to restor stock.
And i can flash 4.1.2 roms but not 4.3 and kitkat.
Im not getting it.
Sent from my LG-P705 using XDA Free mobile app

Categories

Resources