Related
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
vincent85 said:
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
Click to expand...
Click to collapse
relax man!go to settings-connections-usb to pc and NO enable advanced network functionality
vincent85 said:
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
Click to expand...
Click to collapse
TRY FIRST S_WIND...
Don't worry ! Rom and device are ok!
Have you tried to make an Hard reset? If you don't , try now and let us know.
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
vincent85 said:
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
Click to expand...
Click to collapse
have you tried restarting your PC??
vincent85 said:
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
Click to expand...
Click to collapse
Go to your pc...click on active sync icon with right key , go to connection settings and flag usb connection.let us know
Yes, i restarded my PC after i Re-install Activesyn 4.5....
And i did reflash (via Mini Sd card method) the device to another rom (PDAVIET) but problem is still there...
I tried to syn with my other 2 laptop as well but both of them don't make any connection....
Very frustrating...
imdantes said:
Go to your pc...click on active sync icon with right key , go to connection settings and flag usb connection.let us know
Click to expand...
Click to collapse
Done, still the same, no response...
vincent85 said:
Yes, i restarded my PC after i Re-install Activesyn 4.5....
And i did reflash (via Mini Sd card method) the device to another rom (PDAVIET) but problem is still there...
I tried to syn with my other 2 laptop as well but both of them don't make any connection....
Very frustrating...
Done, still the same, no response...
Click to expand...
Click to collapse
Probably during the update procedure some files have corrupted , please wait , i search solution...
Download this program : http://wiki.xda-developers.com/uploads/mtty.exe ,
DISABLE USB PORT FROM ACTIVESYNC, PUT DEVICE IN BOOTLOADER AND START MTTY , NO SELECT COM , AT THE END OF COM MENU , YOU FIND USB , SELECT IT AND TYPING :
task 32 ENTER
task 28 ENTER
task 2A ENTER
info 8 ENTER
task 8 ENTER
Now , remember to reable usb connection in activeSync and try synchronisation , if doesn't work , reflash the rom.
This procedures , should be erase corrupted files.
let us know.
imdantes
P.S. Format also the sd card
YOU FIND USB , SELECT IT AND TYPING :
task 32 ENTER
task 28 ENTER
task 2A ENTER
info 8 ENTER
task 8 ENTER
Click to expand...
Click to collapse
How do i type those? i pick USB and click OK, then the message showed up "USB PORT CAN NOT OPEN" !
i think the phone usb is not working. When i install WM5TORAGE and try to use the mass store option the computer don't pick the connection...
are there any change to fix this problems?
..........anyone?
your problem same as my.but i didint flash any rom .it original rom from dopod .it suddenly cant sync to my pc.
anyone know how to fix ??....pls give us a hand tq .
Hi,
after flashing with Helmi WM6 I had problem with active sync. If I leave the check box on PCto USB connection, Is impossible for me make a connection with PC.
For these reason I would like to make a hard reset but i I press power button and soft reset, dont work. So how can I reflash again the rom?
I would like to write also in italian If there is someone can help me.
tnks.
You should know how to HardReset your device (You MUST perform
hardreset during flashing ROM!)
Just to make it sure - you have UNcheck the USB check box in PC ActiveSync and are no longer able to sync via USB, right?
How to make "proper" flash:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardMain
tanks you Kerio, I have read in the wiki more instruction about hard reset, now is more clear.
Yes If i UNcheck the USB check box in PC ActiveSync, I am no more able to sync via USB, why?
Lol - man
[ ]Allow USB connection -> You CANNOT sync via USB
[x]Allow USB connection -> You CAN sync via USB
--- Really funny Why do you want to uncheck this option? Just let it [x] and its ok...
kerio said:
Lol - man
[ ]Allow USB connection -> You CANNOT sync via USB
[x]Allow USB connection -> You CAN sync via USB
--- Really funny Why do you want to uncheck this option? Just let it [x] and its ok...
Click to expand...
Click to collapse
I,m sorry for my english, maybe I wrote wrong. The trouble is: On the BA, in the USB to PC program, If I Check Enable advance network functionality, I can sync but I can't navigate to internet.
If I UNcheck the check box of Enable advance network functionality, the BA don't sync anymore no more connection to PC.
This was discussed some times ago - use search button.
Shortly : Make your internet connection shared (ON PC) or add "those" registry entries.
*those* - use search button.
Kerio, great help. I found the post as you told me, the file is LSPvalue.reg . After done all work perfectly.
Thanks you so mutch.
Hi All,
I could not access internet at home using USB connection (active sync is OK). But in the office it works well. Is there anything wrong with my PC at home? Thanks.
in activesync go connection setting and chose "The Internet" in the "This computer is connected to:"
If it still failed please do check your firewall setting
Hope this helps
Thanks. But I checked the option and it is "The internet". For firewall, I don't even have one... So strange, right?
can you try delete mobile device on your activesync and re-setup again?
Or check if you have the default window bulitin firewall?
Is your activesync the latest version?
Sorry dunno your problem can only help u troubleshoot
Thanks ckaidi. My active sync is ver 4.5 and the default firewall is disabled. I tried delete the mobile phone and active sync then re-installed but the problem is still there .
I wonder whether there are some 'hidden' options in windows...
Use this software...
http://www.4shared.com/file/17022525/cca97368/WinsockxpFix.html?dirPwdVerified=268e2998
Hi mavipolo,
I could not access the link. What is the name of the software? And what is it for? Thanks
Had the same issue, try this which solved it for me.
Go to Settings > Connections > USB to PC and change it to Serial Sync Mode
How to setting atom as a modem
Hi, can you help me how to setting atom to be a modem? So I can use my atom as a dial phone/modem for my computer.
Thanks...
iwang9 said:
Hi, can you help me how to setting atom to be a modem? So I can use my atom as a dial phone/modem for my computer.
Thanks...
Click to expand...
Click to collapse
You're double posting this. Read the Atom wiki.
richard20260 said:
Had the same issue, try this which solved it for me.
Go to Settings > Connections > USB to PC and change it to Serial Sync Mode
Click to expand...
Click to collapse
I found that I can access internet using opera at home now... But PIE still not work...
Thanks a lot jiggs, the problem is solved!
the 3 options for usb to pc pops up when hd is connected to PC.
But if I want to reconnect to mode e.g: disk driver mode, how could I achieve
this without plugout&plugin the usb cable? Thank you.
you can softreset your phone after changing mode
otherwise you can't as far as I know
Yes you can!
Start -> Settings -> Connections tab -> USB to PC
Select what you need and the device will switch to that mode without any resets or replugging of the cable.
usb2pc doesn't include the internet shareing as usb2pcpopup.
There should be InternetSharing program in your start menu (I have Dutty's 3.3 ROM, I don't remember whether this program is stock or not, but I think it is). If you're connected to pc as activesync / usb drive just launch InternetSharing and the phone will switch to modem automatically. Once you disconnect IS the phone will go back to the activesync / usb drive mode.
Don't be afraid to explore your device (and the manual ) - it looks like you don't know about a lot of its features.
I have just flashed back to the official ROM.
The usb2pc do have 3 options. But the cooked rom like Dutty's 3.3 ROM
have only 2 options without internet sharing.
I am aware that I could run share internect, but it is much better if things
can be controlled in under one control page.
Ok, I'm having a problem with this feature... The USB to PC popup is stuck on internet sharing and it won't let me activesync and it's just really starting to make me angry... argh... I've tried going into the registry to change it but I don't know which value to change. I would love to disable the usb to pc altogether except activesync functions. Could anyone help me? I'm using 6.5 v23017.
Nevermind...lol I fixed it. I manually put it in bootloader mode, and flashed athiene os v23409.
yeah and i dont think that the ics option will appear unless ur phone has been given it sim info
XGX5309 said:
Ok, I'm having a problem with this feature... The USB to PC popup is stuck on internet sharing and it won't let me activesync and it's just really starting to make me angry... argh... I've tried going into the registry to change it but I don't know which value to change. I would love to disable the usb to pc altogether except activesync functions. Could anyone help me? I'm using 6.5 v23017.
Click to expand...
Click to collapse
Is there a solution to set it back to Active Sync without Internet Sharing other than flashing a new ROM?
I do not get the USB2PC-Popup anymore and my USB2PC dialog (Settings->Connection->USB2PC) is somehow incomplete (Can't see the "Ask me first .."-Dialog).
Is there a registry hack or something? I'v been googling for hours and I'm pretty sick of it right now.
Appreciate any help, thank you guys.
// edit says:
Found a registry entry:
HKLM\Software\OEM\USBtoPC
my Values are:
AskConnect: 1
Device_Type: 2
DisablePopUpUI: 0
EnableAdvanceChecked: 0
SyncMode: 1
Still nothing ...
//:edit 2
Yeah, well ... I flashed it.
Does anyone know information about how to connect the Samsung Fascinate as Diag Mode driver? ie: this type of connection needed for QPST/QXDM/CDMA Workshop.
I tried 'debugging mode' enabled from the settings in the Applications, but it didn't create any new port that would recognize for my phone.
The Epic solution is pretty strait forward
Install USB Drivers:
32 Bit or 64 Bit
Put phone into DIAG mode:
Dial ##8778#
Select UART = Modem, USB = Modem.
Click to expand...
Click to collapse
This doesn't seem to work on Fascinate though.
Go to Settings - Wireless Networks - Click to Dialup Networking this will also put it in Dialup mode
hetaldp said:
Go to Settings - Wireless Networks - Click to Dialup Networking this will also put it in Dialup mode
Click to expand...
Click to collapse
wow man, thanks a lot that worked.
Remember to put it Again Dialup Networking off
Thank you for the steps. I was also able to get the phone to be read by QPST and CDMA Workshop. The odd thing is that when I tried to read the phone again the next day, none of the software will read the phone. Interestingly, I can see the COM port and the Modem port in the Device Manager, but the software refuses to read the phone. I am wondering if I accidentally changed one of the settings to turn it into UART or something to this effect, but the code that I found for this (##UPST#) does not work on the phone, even with hidden menu enabled. Any suggestions, currently I am stuck with a phone that can only do voice and text, no 3G? Thank you in advance!
You could try Diag mode
Diag/Testing Mode
*#4636*1111#
QPST sees it, but nothing is editable, in Dial-Up mode?
Thank you for your response! I tried that, it took me to the menu, plugged the phone to the PC, Device Manager shows Samsung Diagnostic Port, I use CDMA Workshop to try to at least read the phone. I connect to the correct COM port, but CDMAWS fails in reading it. I don't get it, it used to work fine with almost the exact same setup. I uninstalled the drivers, reinstalled them, same thing. Wiped the phone, same thing. Kind of frustrating. The only resort I have now is to maybe just get it fully flashed to stock so that I can start from scratch again. Odd, I have never had a phone that was giving me a COM port that phone software consistently fails to read, especially when it worked before. lol. Any assistance with anything else I may try would be greatly appreciated.
**usbui select Modem.. and
Bringing this issue up.... I cannot get it to work. I've read tons of threads and everyone says go to Device Manager and click Ports and then change the port on the Samsung to port 1 and it will show up blah blah Blah.... there is no list that says "Ports" in Device Manager. I have this DialUpNetworking thing checked and debug mode and the port1 shows up in QPST but it says "No Phone". And yes all drivers are installed.
Diag/Testing Mode
*#4636*1111# ??????
That doesn't do jack. It just lets me input the numbers and when I press the last #, all the numbers vanish. I need this to work or I have to get a different Phone.
nFiniti said:
Bringing this issue up.... I cannot get it to work. I've read tons of threads and everyone says go to Device Manager and click Ports and then change the port on the Samsung to port 1 and it will show up blah blah Blah.... there is no list that says "Ports" in Device Manager. I have this DialUpNetworking thing checked and debug mode and the port1 shows up in QPST but it says "No Phone". And yes all drivers are installed.
Diag/Testing Mode
*#4636*1111# ??????
That doesn't do jack. It just lets me input the numbers and when I press the last #, all the numbers vanish. I need this to work or I have to get a different Phone.
Click to expand...
Click to collapse
Do a search in general...i posted how there. It's like *33 something.
**33284 is what ur looking for
Edit: you need to set up the com. That requires knowing the port and putting the phone into dial up mode.
TRY **USBUI (**87284)
You can switch the UART and USB from PDA to MODEM here.
denonlake said:
TRY **USBUI (**87284)
You can switch the UART and USB from PDA to MODEM here.
Click to expand...
Click to collapse
No, I know exactly what he's doing. The phone needs to be in network dial up mode. But for qpst to reckognize it, he needs to add the com.
I found that only the .323 version of qpst worked for me. Also there is the *229 (i think) will reprogram those settings you may have messed up, maybe try that?
Sent from my rooted froyo Fascinate
ziggy484 said:
I found that only the .323 version of qpst worked for me. Also there is the *229 (i think) will reprogram those settings you may have messed up, maybe try that?
Sent from my rooted froyo Fascinate
Click to expand...
Click to collapse
323 works for basic flash, however if he's trying to get ppp configs setup for 3g and what not, he will need build 215. 323 will always revert to the original settings. If he's just trying to flash the prl, then it's no big deal. If he's trying to flash over to a different carrier, then it'll revert to vrz settings.
Menu > Settings > Wireless & Networks
Enable Dial up Networking
Next..
Menu > Settings > Applications > Development
Enable USB Debugging
-------------------------------------------
If Dial-up Networking is not showing perform the following. Dial **33284 followed by SPC (000000 or 468346 ) then scroll to Port Map and select HFK,DIAG. Once this is complete, you should now have Dial-up Networking showing up under Wireless and Network.
Bypass Activation:
Press "Emergency Call"
Dial *#83786633 then press send
After you press "send" press the "home" key and you should now be passed activation
this worked in getting the fascinate into daig mode. thank you!!!
JUSMEJOSE said:
Menu > Settings > Wireless & Networks
Enable Dial up Networking
Next..
Menu > Settings > Applications > Development
Enable USB Debugging
-------------------------------------------
If Dial-up Networking is not showing perform the following. Dial **33284 followed by SPC (000000 or 468346 ) then scroll to Port Map and select HFK,DIAG. Once this is complete, you should now have Dial-up Networking showing up under Wireless and Network.
Bypass Activation:
Press "Emergency Call"
Dial *#83786633 then press send
After you press "send" press the "home" key and you should now be passed activation
Click to expand...
Click to collapse
pkopalek said:
You could try Diag mode
Diag/Testing Mode
*#4636*1111#
QPST sees it, but nothing is editable, in Dial-Up mode?
Click to expand...
Click to collapse
thanks dude your really great i'll bet you make your company lotta money
i need the 16 digit password to change the serial number in sansung galaxy s i400
hello
i need the 16 digit password to change the serial number in sansung galaxy s i400 in cdma works shop please
---------- Post added at 06:18 PM ---------- Previous post was at 06:09 PM ----------
denonlake said:
TRY **USBUI (**87284)
You can switch the UART and USB from PDA to MODEM here.
Click to expand...
Click to collapse
i need the 16 digit password to change the serial number in sansung galaxy s i400 to cdma works shop please
JOSEUBIERA said:
hello
i need the 16 digit password to change the serial number in sansung galaxy s i400 in cdma works shop please
---------- Post added at 06:18 PM ---------- Previous post was at 06:09 PM ----------
i need the 16 digit password to change the serial number in sansung galaxy s i400 to cdma works shop please
Click to expand...
Click to collapse
A quick interweb search brought up this number for the Samsung Continuum SCH-I400
20 10 03 16 19 81 02 19
.