4.2.2 official - Galaxy S III General

Hey friends,
the leaked jelly bean is out for our beloved s3.!!
check from the link. Hit thanks if I helped you
http://www.sammobile.com/2013/05/20...ly-bean-leaked-firmware-for-the-galaxy-s-iii/
----
New enhancements in Android 4.2.2 update
- Android 4.2.2 – Build ID: JDQ39
- New S4 Lockscreen: Multiple Widgets, two Unlock effects (Ripple and Light), improved ripple effect than Android 4.1.2, ability to change clock size and set a personal message
- New Screen modes (From S4): Adapt Display and Professional Photo
- Daydream
- Driving mode
- Actionable notifications
- New Additions in Notification Center
- Completely revamped Settings UI (Tabbed interface – Exactly like the S4)
- Addition of Voice controls (Let’s you control various parts of the phone using voice commands – Galaxy S4 feature)
- Gallery modes have white background (When changing gallery modes to 3D the background changes to white)
- Full screen Samsung apps
- New S-Voice (from S4)
- New smart switch widget
- Found more? Tell us about them in the comments below!
WARNINGS
- This firmware will increase your binary counter but the current binary and system status will remain official.
- We have re-packaged this firmware from dump files.
- There is no modem in this firmware, so the Modem you will be using before flashing this firmware will remain the same.
- This is a pre-release firmware and not official from Samsung.
- We have fully tested this firmware and this firmware works perfectly as any other official firmware.
Firmware Details
Android Version: 4.2.2 – JDQ39 (Jelly Bean)
PDA: I9300XXUFME3
CSC: I9300OJKFME1
MODEM: N/A
Region: Middle East
Carrier: Branded
Changelist: 611730
Build Date: 8 May 2013
Download: I9300XXUFME3_I9300OJKFME1_ILO.zip
Flashing Instructions
- Unzip the file
- Open Odin 3.04 (already included in the firmware package)
- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add I9300XXUFME3_I9300OJKFME1_HOME.tar.md5 to PDA
- Make sure re-partition is NOT ticked
- Start flash, sit back and wait a few minutes.
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Home+power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!

Wow, that's wonderful news
Sent from a better Galaxy designed for humans!

not official it is only a leak .... beta version

NoteboyTech said:
Hey friends,
the official update is out for our beloved s3.!!
check from the link. Hit thanks if I helped you
http://www.sammobile.com/2013/05/20...ly-bean-leaked-firmware-for-the-galaxy-s-iii/
Click to expand...
Click to collapse
Android 4.2.2 Jelly Bean leaked firmware for the Galaxy S III

Seriously, read..
Verstuurd van mijn GT-I9300 met Tapatalk

Sorry guys I was updating the post but as I am a junior member I ain't allowed I'll update it asap!!.. sorry...

Why in Android and Development? This has nothing to do with it!
And there is still a thread for Leaked FWs.
[Leaked JB Firmware] I9300XXUFME3 (4.2.2) - ODIN Firmware [20-05-13]

Omg why not use search first before posting this. Already many times posted now!
Sent from my GT-I9300 using xda premium

Its not an update its an unfinished leaked beta test build and has no place in development .
jje

Srry guys!!.. i AM srry. can this be moved to general?. if possible do it.. and I am a kid stop bashing me!!!

NoteboyTech said:
Srry guys!!.. i AM srry. can this be moved to general?. if possible do it.. and I am a kid stop bashing me!!!
Click to expand...
Click to collapse
Kids should be able to read and use search .
You can report the post via the red triangle in the OP though it has already been reported .
It does not need moving just deleting as it has been posted for hours and hours and even modded .
jje

2 things:
1. If you didn't develop it, it does not go in Android Development, instead it goes in general.
2. This has already been posted multiple times so thread closed.

Related

[ROM][OTA] First Galaxy Note 10.1 Jelly Bean OTA leak

Note: This thread must be moved to the Galaxy Note forum. I have posted it here by mistake
Sammobile has leaked the Official OTA update for Galaxy Note 10.1 India. Here is what they have posted:
This is the very first Android 4.1.1 Jelly Bean TEST OTA Update for the Samsung Galaxy Note 10.1 (GT-N8000). We wanted to give Samsung’s Die-Hard fans a taste of Jelly Bean before it’s officially released. This update will also help 3rd party Android Developers, like CyanogenMod Team, to improve their Android 4.1.1 Jelly Bean custom ROMs for the Samsung Galaxy Note 10.1.
OTA Firmware Details:
Android Version: 4.1.1 – JRO03C
PDA: N8000DDALI1
Country: India (INU)
Build Date: September 7, 2012
Size: 297.7MB
OTA updates’ require a specific base firmware on which they can be flashed upon and are flashed through the stock Samsung Recovery.
This N8000DDALI1 Android 4.1.1 Jelly Bean OTA update requires the user to be on N8000DDALH1 firmware.
Don’t worry we will guide you through all the steps on how you can apply this OTA update on your Samsung Galaxy Note 10.1 (GT-N8000). Make sure you perform a backup of your data before attempting to install this!
Instructions for flashing the OTA Update:
- Make a backup of your data
- Download the Base firmware required by the OTA Update, N8000DDALH1 - Get it from HERE
- Unzip the file
- Open Odin 3.04 (Download it from HERE)
- Restart the device into download mode (Press Power Button + Volume down)
- Connect phone and wait until you get a yellow/blue sign in Odin
- Add N8000DDALH1_N8000DDALH2_N8000DDLG5.tar.md5 to PDA
- Make sure re-partition is NOT ticked
- Start flash, sit back and wait a few minutes
- Download the N8000DDALI1 OTA Update (Download it from HERE)
- Copy the OTA update to your External SD Card
- Restart the device into Recovery Mode (Press Power Button + Volume up)
- Select Apply update from External Storage
- Browse to the OTA update and flash it
- When OTA update is flashed perform “Wipe Data/Factory Restore” (Will format your internal SD Card)
- Reboot your device and Voila!
Click to expand...
Click to collapse
Source: Sammobile
lalitindoria said:
Note: This thread must be moved to the Galaxy Note forum. I have posted it here by mistake
Sammobile has leaked the Official OTA update for Galaxy Note 10.1 India. Here is what they have posted:
Source: Sammobile
Click to expand...
Click to collapse
your OP is OTA for Note 10.1 DDALI1.
But your thread subject is OTA for Tab 10.1.
Which one is the correct device, sir ?
I remember changing it. Not sure what happened, I have changed it again. It is for Note.
bug
Some problem occur when try to chose wallpaper.
And there are no pen options in settings .
I know no one asked for this but just in case if some developer is looking for this.

Samsung starts Jelly Bean update for GT-I9100M

Some of the Enhancements in the new Jelly Bean Update:
- Buttery Smooth Performance & Great Stability (Thanks to Project Butter)
- Full User Interface Revamp (Same UI as of the Galaxy S III and Galaxy Note II)
- TouchWiz Nature UX
- Samsung’s S Cloud services
- Improved Camera features
- New Lockscreen With Many Customization Options
- New Features like Direct Call, Smart Stay and Pop-up Play
- New Widgets (From Galaxy S III)
- 2 Home screen modes
- New Notification bar With More Notification Toggles
- Google Now
Official Firmware Details:
Android Version: 4.1.2 – Build JZO54K
PDA: I9100MUGMA5
CSC: I9100MOYCMA5
MODEM: I9100MUGMA5
Source- http://www.sammobile.com/2013/02/14...e-galaxy-s-ii-gt-i9100m/#.URysuCXmUHo.twitter
nice ! if someone could extract RIL+modem as a cwm zip or odin flasheable its should be nice to try and replace the old LD3 modem running on my neat 4.3 LSD :laugh:
I've uploaded a faster download link for this (Canada) JB update here:
http://d-h.st/users/dsi
It also appears that ExynosAbuse can't root my phone anymore. Exploit fixed I guess!
I'm running neatrom 4.0 based off the jellybean leak and love it. Would it be a good idea to flash the modem from this rom since I'm on virgin mobile in ontario and if so how do you do it?
Modem
scotvl said:
I'm running neatrom 4.0 based off the jellybean leak and love it. Would it be a good idea to flash the modem from this rom since I'm on virgin mobile in ontario and if so how do you do it?
Click to expand...
Click to collapse
Flash LQ6 Modem is the best for us in Canada,better then MUGMA5:good:
Where you find that modem? I'm running a pretty old one... Don't remember which one as my mom uses the phone now and not me.
I wonder if we'll see ROMs based on this firmware... Man I miss my S2 now. So much more fun and stable than LG Optimus G, custom ROM wise.
Pulling the battery out with it on still results in a bootloop. Looks like that is not fixed.
SIM network unlock pin
just updated mine to JB via kies and now its asking for a SIM network unlock PIN... I can dismiss it and access the menu and homescreen and all but I cannot make or receive any calls. There are two other people who seem have the same problem
Please help!
gamith.silva said:
just updated mine to JB via kies and now its asking for a SIM network unlock PIN... I can dismiss it and access the menu and homescreen and all but I cannot make or receive any calls. There are two other people who seem have the same problem
Please help!
Click to expand...
Click to collapse
As mentioned in a few threads, download GalaxSim Unlock from the Play Store. This will fix your problem.

[Official Firmwares: GT-I9082L] I9082LDCUBMK2 [Updated 12/04/14] TESTING***

Official Firmwares for the Samsung Galaxy Grand DUOS GT-I9082L (Latin Variant)
These are NOT all the firmwares; here will mainly be base, unbloated, unbranded, universal ROMS.
LATEST BUILD
BUILD: 2212586
FIRMWARE: I9082LUBUBMK2
OS VERSION: 4.2.2
REGION: TTT - Trinidad & Tobago
Carrier: Unbranded
Notes:
- UNBRANDED/UNBLOATED!
- New "Galaxy GranD" Splash Screen
- Brighter Display
- Gradient Notification Bar
- Better/More Readible Text Layouts: Weather widget, Settings/Menus, Google Search bar
- Minimum UI & Sound changes (Notification/Pop ups, Keyboard sound, Gallery Swipe sound, etc.)
- Homescreen Lag Fixed
- Improved light effect
- GPU driver upgrade: Images now are displayed with higher resolution.
Samsung seems to have done some upgrades to the GPU, for in the past I'd load a High Resolution Wallpaper and it would pixelate, now, it looks great, the same goes with the lockscreen light effect, a bit smaller effect, buta noticeable higher resolution. Overall... this factory firmware feels like its a custom ROM. Touchwiz feels light, the notification pane is silky smooth. Nice. So far, the best one yet.
PREVIOUS BUILDS
[*]BUILD: 1341883
[*]FIRMWARE: I9082LDCUBMK3
[*]OS VERSION: 4.2.2
[*]REGION: N/A
[*]Carrier: Unbranded
Notes:
- UNBRANDED/UNBLOATED!
- New "Galaxy GranD" Splash Screen
- Gradient Notification Bar (vs. Transparent)
- Better/More Readible Text Layouts: Weather widget, Settings/Menus, Google Search bar
- Minimum UI & Sound changes (Notification/Pop ups, Keyboard sound, Gallery Swipe sound, etc.)
- Homescreen Lag Fixed
- Improved light effect
- GPU driver upgrade?
*** I AM EXPERIENCING PROBLEMS RESTORING TO THIS BUILD: I've always used Titanium to restore My Apps and Data, but this build, and for the first time, it completely lagged my device. So if you install this and want to restore, do not restore it's data.***
Install Update (1/10/2014): I figured out that by 'upgrading' from any of the previous build to this one, no such lag is present. A fresh install from a fully wiped phone has yielded several devices to lag, but after several tries as an "upgrade", no lag issues have presented.
BUILD: 1839656
FIRMWARE: I9082LVJUBMJ1
OS VERSION: 4.2.2
REGION: Brazil
Carrier: Tim Mobile
Note: This is a branded build for Tim Mobile-Brazil. It comes with Tim Media Bloatware as well as several Samsung ones as well. Performs well, though knowing from previous experiences, branded firmwares don't perform as good as unbranded ones. But, currently it's the only 4.2.2 released for the Galaxy Grand L.
BUILD: 1342590
FIRMWARE: I9082LUBAMH1
OS VERSION: 4.1.2
REGION: Trinidad & Tobago
Carrier: Unbranded
Note: Testing
BUILD: 1272899
FIRMWARE: I9082LVJAMF1
OS VERSION: 4.1.2
REGION: Brazil
Carrier: oi
Note: As quick as the I9082 4.2.2 Scored 9200+ on Antutu Benchmark, but has some bloatware. Some are pretty cool, but portuguese.
BUILD: 1248672
FIRMWARE: I9082LDCAMF1
OS VERSION: 4.1.2
REGION: Unknown
Carrier: Unbranded
Note: No Bloatware. Very quick. Much better than I9082LUBAMC2.
BUILD: 1091514
FIRMWARE: I9082LUBAMC2
OS VERSION: 4.1.2
REGION: Chile
Carrier: Unbranded
Note: No Bloatware. Super Smooth.
it's works on i9080 too.
Are you working on the L variant?
Thanks !
Thanks for the Stock Roms, I'm from Chile and I have installed:
BUILD: 1091514
FIRMWARE: I9082LUBAMC2
OS VERSION: 4.1.2
REGION: Chile
Carrier: Unbranded
And no problem with it, but with I9082LDCAMF1 I cound not find spanish language, so I've installed and app that turned my phone from english to spanish but no idea how to change the language in the keyboard cause there is not a spanish dictionary to use so I had to install the I9082LUBAMC2 cause this one comes with spanish language system and keyboard.
If you have any idea about how to change or add spanish dictionary to use it on the keyboard plz tell me how
Sry for my poor English.
New firmware release
NEW FIRMWARE RELEASE FOR OUR Galaxy Grand Duos (GT-I9082L)
REGION: BRAZIL
PDA VERSION: I9082LVJAMF1
VERSION: 4.1.2
BUILD DATE: 21.06.2013
tks!
gracias!! :fingers-crossed:
Does anyone have a updated about 4.2.2 for L variant???
Really looking foward to this!
focasam said:
Does anyone have a updated about 4.2.2 for L variant???
Really looking foward to this!
Click to expand...
Click to collapse
There is not a 4.2.2 rom for the L variant yet, I'm wating for the same stuff.
mauriciotmc90 said:
There is not a 4.2.2 rom for the L variant yet, I'm wating for the same stuff.
Click to expand...
Click to collapse
Yeah, we are waiting and waiting!!!!!!!!
zmp2000 said:
Yeah, we are waiting and waiting!!!!!!!!
Click to expand...
Click to collapse
mauriciotmc90 said:
There is not a 4.2.2 rom for the L variant yet, I'm wating for the same stuff.
Click to expand...
Click to collapse
Yeah, the problem is we don't get ETA by samsung...
I wish Dual-SIM was supported in Cyanogem Mod, that way we wouldn't need Samsung to update our device!
mauriciotmc90 said:
NEW FIRMWARE RELEASE FOR OUR Galaxy Grand Duos (GT-I9082L)
REGION: BRAZIL
PDA VERSION: I9082LVJAMF1
VERSION: 4.1.2
BUILD DATE: 21.06.2013
Click to expand...
Click to collapse
Since the build is identical to another one posted, I didnt bother to update it...
Help Please
Paul_Days said:
Official Firmwares for the Samsung Galaxy Grand DUOS GT-I9082L (Latin Variant)
These are NOT all the firmwares; here will mainly be base, unbloated, unbranded, universal ROMS.
LATEST BUILD
BUILD: 1839656
FIRMWARE: I9082LVJUBMJ1
OS VERSION: 4.2.2
REGION: N/A
Carrier: N/A
Note: Testing
Click to expand...
Click to collapse
I have a Question. My device is gt i9082L with 4.1.2 firmware.
GT-I9082L TTT I9082LUBAMH1 is my lates firmware. i want to install the GT-I9082L ZTM I9082LVJUBMJ1 with 4.2.2 firmware. It is possible? If Yes How Can I Do It.
My device is allredy rooted.
lucaniulian said:
I have a Question. My device is gt i9082L with 4.1.2 firmware.
GT-I9082L TTT I9082LUBAMH1 is my lates firmware. i want to install the GT-I9082L ZTM I9082LVJUBMJ1 with 4.2.2 firmware. It is possible? If Yes How Can I Do It.
My device is allredy rooted.
Click to expand...
Click to collapse
Yes, this is the reason why in the forum we post the latest firmwares.
There are several ways but the most common is with ODIN (Samsung Firmware Update Utility).
Odin Thread:
http://forum.xda-developers.com/showthread.php?t=2189539
Example Odin Flashing Guide
http://forum.xda-developers.com/showthread.php?p=46440034
Basic Walkthrough:
1. Download and Decompress the firmware
2. Download and Install Odin on your computer (if you dont have Kies, it would be wise to install it for it's driver, option B: download Samsung device drivers.)
3. Load Odin, select the PDA tab and find your firmware, it should be in ".tar" form
4. Boot device in 'Download Mode', (Press VOL- / Home / Power)
5. Connect USB Cable to device and PC, press VOL+ to continue
6. Once a YELLOW Prompt shows up with a COM port displayed, PRESS "START"
7. Let ODIN Flash the firmware until the YELLOW Prompt displays "PASS" in GREEN.
Read the Guide first, this is just a quick walkthrough.
Good luck,
Paul
Paul_Days said:
Yes, this is the reason why in the forum we post the latest firmwares.
There are several ways but the most common is with ODIN (Samsung Firmware Update Utility).
Odin Thread:
Basic Walkthrough:
1. Download and Decompress the firmware
2. Download and Install Odin on your computer (if you dont have Kies, it would be wise to install it for it's driver, option B: download Samsung device drivers.)
3. Load Odin, select the PDA tab and find your firmware, it should be in ".tar" form
4. Boot device in 'Download Mode', (Press VOL- / Home / Power)
5. Connect USB Cable to device and PC, press VOL+ to continue
6. Once a YELLOW Prompt shows up with a COM port displayed, PRESS "START"
7. Let ODIN Flash the firmware until the YELLOW Prompt displays "PASS" in GREEN.
Read the Guide first, this is just a quick walkthrough.
Good luck,
Paul
Click to expand...
Click to collapse
And the Kernel Files? how do i flash it? the same way. it is necessary?
lucaniulian said:
And the Kernel Files? how do i flash it? the same way. it is necessary?
Click to expand...
Click to collapse
Factory Firmwares have everything included (kernel too), so you dont need to flash anything else. If you choose to flash a third-party or modded kernel, then you follow the same steps.
-Paul
Paul_Days said:
Factory Firmwares have everything included (kernel too), so you dont need to flash anything else. If you choose to flash a third-party or modded kernel, then you follow the same steps.
-Paul
Click to expand...
Click to collapse
Thank you. I followed the steps you listed and everything is ok for now.
lucaniulian said:
Thank you. I followed the steps you listed and everything is ok for now.
Click to expand...
Click to collapse
-Enjoy!
New Firmware Released: I9082LDCUBMK3
I9082LDCUBMK3 is available for our devices.
- UNBRANDED/UNBLOATED!
- New "Galaxy GranD" Splash Screen
- Gradient Notification Bar (vs. Transparent)
- Better/More Readible Text Layouts: Weather widget, Settings/Menus, Google Search bar
- Minimum UI Sound changes
Overall... this factory firmware feels like its a custom ROM. So far, the best one yet.
- Enjoy
Paul_Days said:
I9082LDCUBMK3 is available for our devices.
- UNBRANDED/UNBLOATED!
- New "Galaxy GranD" Splash Screen
- Gradient Notification Bar (vs. Transparent)
- Better/More Readible Text Layouts: Weather widget, Settings/Menus, Google Search bar
- Minimum UI Sound changes
Overall... this factory firmware feels like its a custom ROM. So far, the best one yet.
- Enjoy
Click to expand...
Click to collapse
Thanks for the update will be installing this one
---------- Post added at 08:37 AM ---------- Previous post was at 07:43 AM ----------
Paul_Days said:
Official Firmwares for the Samsung Galaxy Grand DUOS GT-I9082L (Latin Variant)
These are NOT all the firmwares; here will mainly be base, unbloated, unbranded, universal ROMS.
*** I AM EXPERIENCING PROBLEMS RESTORING TO THIS BUILD: I've always used Titanium to restore My Apps and Data, but this build, and for the first time, it completely lagged my device. So if you install this and want to restore, do not restore it's data.***
Click to expand...
Click to collapse
What rom were you running previously?
stdly said:
thanks for the update will be installing this one
---------- post added at 08:37 am ---------- previous post was at 07:43 am ----------
what rom were you running previously?
Click to expand...
Click to collapse
i9082lvjubmj1...

[ROM] Android 4.3 JB Official Update for Note 2 Resumable Links

:laugh::laugh::laugh:
Android 4.3 Jelly Bean Official Firmware Update for Galaxy Note 2 GT-N7100
CHANGES AND IMPROVEMENTS IN ANDROID 4.3 UPDATE
- GALAXY GEAR Support
- TRIM Support (Makes the device much faster)
- Samsung KNOX
- Samsung Wallet (Pre-loaded)
- Better RAM management
- Core UI elements updated to the ones on the Galaxy S4 (Galaxy S4′s theme all over)
- New Samsung Keyboard
- GPU drivers have been updated (Higher GPU benchmark scores)
- New Lockscreen: Multiple Widgets, improved ripple effect than Android 4.1.2, ability to change clock size and set a personal message
- New screen modes (From S4): Adapt Display and Professional Photo
- Daydream
- Driving mode
- Actionable notifications
- Move-to-SD-card feature
- New Camera mode : Sound and Shot
- New Additions in Notification Centre
- Completely revamped Settings UI (Tabbed interface – Exactly like the Galaxy S4)
- Implementation of Voice controls (Let’s you control various parts of the phone using voice commands – Galaxy S4 feature)
- New Samsung Apps: Calculator, Clock, Contacts, Gallery, Music
- Full screen Samsung apps
- New S-Voice (from Galaxy S4)
- Found more? Tell us about them in the comments below!
Model: GT-N7100
Country: India
Version: Android 4.3
Changelist: 2099172
Build date: Sun, 10 Nov 2013 14:55:01 +0000
Product Code: INU
PDA: N7100XXUEMK4
CSC: N7100ODDEMK1
MODEM: N7100DDEMJ9
Download Links File Size - 1.154 GB
http://www.hotfile.com/dl/255694900/d3cd019/N7100XXUEMK4_N7100ODDEMK1_INU.zip.html
Cloud Storage links:
http://yadi.sk/d/1GBgU8s6CwVzZ
https://my.pcloud.com/#page=publink&code=XZAlbZAOkT5oC8GsFlOiw58zqEkkj0EccV
https://docs.google.com/file/d/0B4nhRvxiABBuaU1peTY3TDlQMmM/edit
https://www.dropbox.com/s/6ojwsg7yhukj282/N7100XXUEMK4_N7100ODDEMK1_INU.zip
https://www.dropbox.com/s/zk086o3xi2589sf/N7100XXUEMK4_N7100ODDEMK1_INU.zip
Resumable Links:
http://fs2.filegir.com/reza2828/N7100XXUEMK4_N7100ODDEMK1_INU.zip
Mediafire Link ROM 4.3 India 1.05 GB
Install Android 4.3 Jelly Bean Official Firmware on Galaxy Note 2 N7100 through Odin:
1. Download Android 4.3 XXUEMK4 Firmware for Galaxy Note 2 N7100 from the above list
2. Download Odin 3.07.
3. Switch off your phone and boot Galaxy Note 2 N7100 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Note 2 N7100 to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: N7100XXDLJ5_N7100ODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish
Download below linked ROM its Pre-Rooted Official Android 4.3 ROM, KNOX bootloader removed.
Pre-Rooted | DeOdexed N7100XXUEMK4 ROM
http://forum.xda-developers.com/showthread.php?t=2533611
Big Thanks to
@kunals.shah - For Pre-Rooted | DeOdexed N7100XXUEMK4 ROM
Thanks
Sent from my GT-N7100 using xda app-developers app
Thanks a Lot !!! Resumable links awesome!
Chinese Rom it's out now btw, you should add it too.
Enviado desde mi GT-N7100 usando Tapatalk
is it a wipe rom???
xdriver said:
is it a wipe rom???
Click to expand...
Click to collapse
any one updated via this rom
Yes , I updated using this ROM and it didn't delete anything , all my apps were intact. Before updating i unrooted my phone ( reset using triangle aways and then unroot from super su app , i don't know how much this affects this). Before all of that i replaced my recovery to stock recovery.
Is this the official update from Samsung? The final build of it as well? I read in a swedish newspaper the 4.3 update had started rolling out officially from Samsung. Any critical bugs in the update so far?
I can install this one on my swedish note2 then? Doesn't matter that there is no swedish language since i use the english one.
Hi. Can I flash n7100 4.3 rom to dual sim N7102? Thanks!
Thanks A Million
I cannot tell enough how much I appreciate these resummable links. I hate sammobile and others so much for their hotfile, etc links. Some of us are from countries where we cannot easily subscribe for such services and also have bad internet as well. So most of the time we are left to search high and low for resumable links. Once again, thanks a million.
thank you for the links.
Quick question ----> I've restored my Note 2 to full official (system status normal, stock rom, stock recovery, counter 0 etc)
If I flash this official firmware via odin, will it increase my counter and or status?
Thank you in advance
I uploaded the file to another dropbox account as thank you, the current dropbox link is down.
https://www.dropbox.com/s/zk086o3xi2589sf/N7100XXUEMK4_N7100ODDEMK1_INU.zip
I don't understand why Samsung doesn't add Emoji support like they did on Note 3 and Galaxy S4 update.
Enviado de meu GT-I9505 usando Tapatalk
thank u ..
i really thank u a lot for providing the mirror resumable links for the rom....we rely do appreciate ur work...thanx a lot
A couple of questions as this downloads on my Note 2, has anyone noticed wether a Knox counter has appears in download mode since flashing this and has anyone tried using Mobile Odin (as I plan to try that method)
Sent from my SM-N9005 using Tapatalk
Menvaihelv... said:
I can install this one on my swedish note2 then? Doesn't matter that there is no swedish language since i use the english one.
Click to expand...
Click to collapse
Have you installed it? Just curious on the result
STELIOSFAN said:
thank you for the links.
Quick question ----> I've restored my Note 2 to full official (system status normal, stock rom, stock recovery, counter 0 etc)
If I flash this official firmware via odin, will it increase my counter and or status?
Thank you in advance
Click to expand...
Click to collapse
no need to worry.flashing stock rom will not increase the counter.
root
how to root 4.3 for Indian cfw
DarknessSky said:
Is this the official update from Samsung? The final build of it as well? I read in a swedish newspaper the 4.3 update had started rolling out officially from Samsung. Any critical bugs in the update so far?
Click to expand...
Click to collapse
Ya This is official 4.3 ROM for India.
colegu2002 said:
Yes , I updated using this ROM and it didn't delete anything , all my apps were intact. Before updating i unrooted my phone ( reset using triangle aways and then unroot from super su app , i don't know how much this affects this). Before all of that i replaced my recovery to stock recovery.
Click to expand...
Click to collapse
What about ur Knox Warranty Void value, is it 0 or 1.
Deshabilitado said:
Chinese Rom it's out now btw, you should add it too.
Click to expand...
Click to collapse
Sorry bro....
aquifx said:
Thanks a Lot !!! Resumable links awesome!
Click to expand...
Click to collapse
1 more link also added.
gaore said:
Hi. Can I flash n7100 4.3 rom to dual sim N7102? Thanks!
Click to expand...
Click to collapse
No bro, its only for N7100.

[Q] After latest firmware update - Wifi will not turn on

Firstly some details....
Galaxy was rooted but was still stock ROM. The ONLY change I did was install Adaway - nothing else
Anyway, I used Kies v2.x today (25/11/13) to backup my phone - when I started it up it said there was a new firmware update. I did a backup & then like a idiot - I decided to accept it.....
... everything seemed to go OK... it installed, rebooted etc etc & when I checked all the apps still worked, home screen OK etc etc.
I then decided to do a bit of Browsing - so dragged down the notification bar & tapped the Wifi.... It didn't turn on.
It moves over to ON - then moves straight back to 'off'
Instead I get a silver shield pop up, & a 'Security notice' stating - 'your device's security has blocked an action that is not permitted. No further action is required'
Long tap on this brings up a [App info] box & tapping this shows 'Knox notification manager'
Tried googling this & I find it's part of Samsung 'security', so started trying to find how to fix/bypass/stop it from blocking me from turning on my Wifi
Some suggestions were ..Softreset,reset data/cache, pull battery - even hard reset... nothing worked (couldn't 'freeze' the app(s) as Titanium need to be brought for that feature)
Now I thought I'll just restore the backup I did for contacts etc, so I can at least use it as a phone & hope that Samsung DID **** up with the firmware & a new firmware will fix it
- but re-starting Keis & it tell me v2 is not compatible with my phone & I have to use V3, so I downloaded/Upgraded it & it sees the phone, but trying to restore the backup & it fails
I checked my 'rom' counter & that's is set to 0 & device status shows 'samsung' - however doing a 'update check' (from within phone) states my phone is 'modified' (I guess it's sees SuperSU or the modified host file)
I managed to restore my contacts using GPRS (but it cost me a package as I'm on PAYG), but why cant I get my Wifi to turn on ??
Without that I can't restore any apps (easily)... or update or do anything
Is it a cockup by Samsung with their firmware update ??
Is it this dam 'Knox' thing..??
Is it because of the 'altered Host' file from adaway ??
Is it because it was 'rooted' ??
I've seen posts about restoring the stock firmware, which directs me to Sam's webpage - but the only GT-i9505 I found there for a UK unlocked/unbranded phone is a GT-i9505 LTE (I guess I should use the BTU & not Branded ones) which I'm pretty sure isn't mine (I may be wrong) & apparently I have to sign up to download it anyway
Has anyone else had this problem ??
What can I do to fix it ??
Can anyone help ??
I've only had this phone for a couple of days & I hate to think it's been buggered up by Samsung Firmware Update
I'm not being funny but if you use the search feature in the Q&A section there are loads of threads to do with WiFi not working and multiple solutions. Its hit and miss which solutions work and which don't, so go through them and come back when they haven't worked.
Pulse654321 said:
I'm not being funny but if you use the search feature in the Q&A section there are loads of threads to do with WiFi not working and multiple solutions. Its hit and miss which solutions work and which don't, so go through them and come back when they haven't worked.
Click to expand...
Click to collapse
And you think that I haven't used search ??
I have, but I've only tried the 'simple' things (soft/hard rest etc) since for a newbie like me many posts are very confusing
for example this one (although its for rooting) has a bit about
FYI: ODIN has problems with flashing latest FW's and if WiFi doesn't work you MUST flash ROM again or use matching WiFi-FIX (post #2) to make it work.
Click to expand...
Click to collapse
however looking at 2nd post & there's a link to WiFifix where there are many files, which I am unsure which one to use.
Kies 3 tell me I have PDA:MK8 / Phone:MH8 / CSC:MK5 (BTU) & there a MK8 AND a MH8 file there - so which one do I use ? (BTW, I updated the firmware originally using Keis so I don't think the WiFi fix is really relevant, but reflashing the ROM with Odin MAY be useful to know.. if only I know WHICH rom to use) I won't be able to use keis since v3 tells me that 'Your device current firmware is not supported to update via Kies'
> I've read about flashing a Modem with Odin - but that didn't say where I can get it from or which file to use
> I've read articles about 'Knox Warrenty' being '1' or '0x1' (or whatever) - so how do I check that ??
> I've also read about 'freezing' the Knox apps to 'allow' me to turn on my Wifi - but to do so Titanium is recommended (& it has to be the paid for version to 'freeze' apps)..
which I cant download because I have no Wifi (& it costs a FORTUNE to do so using PAYG)
> I've also seen posts about UNROOTING the phone by using Odin & install stock ROM (in case you need to send back to Samsung)
In second post there's quite a few United Kingdom BTU (I assume I need a BTU for an Unbranded Sim-free phone) with different version.. I I assume for the latest version it's the first one in the list
United Kingdom BTU (November 2013) (NO DOWNGRADE)
PDA: I9505XXUEMK8
CSC: I9505BTUEMK5
MODEM: I9505XXUEMK8
Version 4.3
but how do I find out if the Modem is correct ??
& since I have problems with the Wifi with the latest version - perhaps there's a problem with it in general,
can I downgrade back to 4.22 ?? I've not seen any mention if this is possible & once again - WHICH one do I use ? there like 3 or 4 different ones
> I've also seen post elsewhere that direct me to sammobile.com - I assume my GT-i9505 is the same as a 'GT-i9505LTE' (that is how much of a newbie i am) since that is the only UK BTU they have...
Checking firmware on the site & it shows
PDA: I9505XXUEMK8
CSC: I9505BTUEMK5
Modem: I9505XXUEMK8
Latest firmware version
GT-I9505 Galaxy S 4 LTE
PDA: I9505XXUEMK8
CSC: I9505BTUEMK5
MODEM: I9505XXUEMK8
Added: 2013-11-22
PDA and CSC match (I think) with Keis (as it only show the last 3 characters) but once again .. how do I find out the Modem ?
FYI in 'About Phone', which might be useful for anyone who can offer me proper advice into which file(s) I should use (I forgot to add it to first post), I have :-
Model number GT-I9505
Android Version 4.3
Baseband version : I9505XXUDMH8
Kernel version: 3.4.0-2082040
[email protected] #1
Tue Nov 19 17:21:44 KST 2013
Build Number: JSS15J.I9505XXUEMK8
SE for Android status: Enforcing SEPF_GT-I9505_4_3_0014
Secure boot status: type Samsung
& It's a UK Sim-free Unbranded phone
> I've read about flashing a Modem with Odin - but that didn't say where I can get it from or which file to use
Click to expand...
Click to collapse
You find it yourself, they're all over the place. SamMobile being one.
> I've read articles about 'Knox Warrenty' being '1' or '0x1' (or whatever) - so how do I check that ??
Click to expand...
Click to collapse
Download mode.
> I've also read about 'freezing' the Knox apps to 'allow' me to turn on my Wifi - but to do so Titanium is recommended (& it has to be the paid for version to 'freeze' apps)..
which I cant download because I have no Wifi (& it costs a FORTUNE to do so using PAYG)
Click to expand...
Click to collapse
Download the APK file to your PC, plug your phone in, transfer to phone's memory, using a file browser/manager on your phone, install it?
> I've also seen posts about UNROOTING the phone by using Odin & install stock ROM (in case you need to send back to Samsung)
In second post there's quite a few United Kingdom BTU (I assume I need a BTU for an Unbranded Sim-free phone) with different version.. I I assume for the latest version it's the first one in the list
United Kingdom BTU (November 2013) (NO DOWNGRADE)
PDA: I9505XXUEMK8
CSC: I9505BTUEMK5
MODEM: I9505XXUEMK8
Version 4.3
Click to expand...
Click to collapse
Yes that'll be the most recent
But how do I find out if the Modem is correct ??
Click to expand...
Click to collapse
I don't get what you mean. Correct for what?
Since I have problems with the Wifi with the latest version - perhaps there's a problem with it in general,
can I downgrade back to 4.22 ?? I've not seen any mention if this is possible & once again - WHICH one do I use ? there like 3 or 4 different ones
Click to expand...
Click to collapse
There is a massive problem with the updates lately, Samsung have pulled almost all of the 4.3 updates in UK and US from what I've read.
I think you can install a 4.2.2 version but that won't get rid of KNOX, people are still trying to work out a way of getting rid of it.
> I've also seen post elsewhere that direct me to sammobile.com - I assume my GT-i9505 is the same as a 'GT-i9505LTE' (that is how much of a newbie i am) since that is the only UK BTU they have...
Checking firmware on the site & it shows
PDA: I9505XXUEMK8
CSC: I9505BTUEMK5
Modem: I9505XXUEMK8
Latest firmware version
GT-I9505 Galaxy S 4 LTE
PDA: I9505XXUEMK8
CSC: I9505BTUEMK5
MODEM: I9505XXUEMK8
Added: 2013-11-22
PDA and CSC match (I think) with Keis (as it only show the last 3 characters) but once again .. how do I find out the Modem ?
Click to expand...
Click to collapse
Again, not being funny, but you just wrote/copied the bit you need to look at.
MODEM: I9505XXUEMK8
Click to expand...
Click to collapse
Thanks for replying & yes I know that many things I've said do sort of confirm what I think may be the right ROMs etc..
But I would like to be ABSOLUTELY sure I use the right one. Many posts say you can seriously brick your phone using the wrong files
> I guess the modem files are somewhere in the forums on Sammobile then ??.. I never look that hard there
> In download mode - the text in the corner is so small I can barely read it.. guess I have to get a magnifying glass to see that
> Had a derpy moment about the download via PC & transfer over.. & as said I would still need a paid version of Titanium to freeze apps.
Yes I could google & download from suspicious sites (there's no way to get it from Play store for example) but that's one thing I REALLY hate doing - you never know whats been added
The bit I mentioned about 'modem' - Can you get 'stock' roms with different modem files ?
.. I know you can get customized roms of stock . but worried that using the wrong file can seriously brick your phone
All I wanted to know is how do I find out what Modem is installed atm on my phone to check its the same as in the ROM download
About the downgrading/unrooting - Yes I know it won't get rid of Knox, but at least I could switch on my WiFi with (one of) the previous 4.2.2 version (whatever one I had before). Even reverting to a working unrooted older ROM would be better than no WiFi at all (especially if I have to send the phone back to Samsung service for example)
As for the Sammobile details & my phone details, I was a little concerned with the differences shown between them
For example: I updated my Firmware yesterday (25th) & my phone shows Baseband version : I9505XXUDMH8
There's no 'UDMH8' shown in the latest rom on Sam's: only PDA (UEMK8) ,CSC (UEMK5) or Modem (UEMK8)
Although there IS a 'UEMK8' under my phones Build Number: JSS15J.I9505XXUEMK8
(& I always thought 'E' came after 'D' so if the latest sam rom came out on 22nd & I updated later than that .. why didn't I get the 'E' instead of the 'D' ?)
Also there is no 'UEMK5' shown under My Phone details (that I can find). Since there's no '5' in my phone details I was (once again) worried that using the wrong file would brick the phone
- Can I assume then that 'PDA' shown by Keis is the same as the last part of 'Build' ?? & as long as they are the same then the ROM's the same & is safe to use ??
- What do the CSC (UEMK5) and MODEM (UEMK8) numbers refer to then ?? & should I be worried if they are different than what (may be) on my phone
Oh - one last thing IS my GT-I9505 phone the same as a GT-I9501 LTE ??? - I thought there was a difference between a 'normal' and a 'LTE' phone (just not sure what)
Thanks again for taking the time in answering my (stupid) questions.For a newbie, this type of thing can be a bit nerve wracking.. I would hate to see a expensive phone being totally bricked
EDIT : just found out about *#1234#.. STILL not sure what these refer to (compared to Keis) but at least I now see a CSC, & there's a 'UEMK5' and 'UEMK8' there - what the hell is CP - boy is THIS confusing
AP: I9505XXUEMK8
CP: I9505XXUDMH8
CSC: I9505BTUEMK5

Categories

Resources