Thanks for your feedback!, Ive found the best setup!
Higher my friend.
Sent from my R800i using xda app-developers app
JunDavis said:
Higher my friend.
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Herro there
So what set cpu setup u rocking?
Lagfree
Min - 230 or whatever
Max 1612
Usually on 1612
IO - Sio
Sent from my R800i using xda app-developers app
JunDavis said:
Lagfree
Min - 230 or whatever
Max 1612
Usually on 1612
IO - Sio
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Thanks man, ill try your set up out after my xplay has charged and will post results later of how smooth it is with mc4 and some other games like rr3
JunDavis said:
Lagfree
Min - 230 or whatever
Max 1612
Usually on 1612
IO - Sio
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
I tried out your Set CPU setup and it was kind of bad, because of the lagfree governor,i did some research and i found a thread explaing all governors and lagfree doesn't actually make your phone "Lag free" it saves battery by throttling it down to the minimum clock speed for a simple task but when it needs more juice it will throttle higher providing more performance, but it doesn't work well as i have had regular force closes with apps like FlipBoard, Falcon Pro and messaging (which force closed alot)
Thanks anyways for contributing
Pizza_Dox said:
I tried out your Set CPU setup and it was kind of bad, because of the lagfree governor,i did some research and i found a thread explaing all governors and lagfree doesn't actually make your phone "Lag free" it saves battery by throttling it down to the minimum clock speed for a simple task but when it needs more juice it will throttle higher providing more performance, but it doesn't work well as i have had regular force closes with apps like FlipBoard, Falcon Pro and messaging (which force closed alot)
Thanks anyways for contributing
Click to expand...
Click to collapse
I didnt use the lagfree governor is said its lagfree.
The governor i used was Darkside. From the new lupus stock GB/ICS kernel.
JunDavis said:
I didnt use the lagfree governor is said its lagfree.
The governor i used was Darkside. From the new lupus stock GB/ICS kernel.
Click to expand...
Click to collapse
Sorry man for the mistake
I will try to read better next time,
I am currently using Doom Kernel so i don't have the darkside governor.
I will try the lupus Kernel maby tomorrow as i need my phone for social purposes right now,
OMG!!!
JunDavis said:
I didnt use the lagfree governor is said its lagfree.
The governor i used was Darkside. From the new lupus stock GB/ICS kernel.
Click to expand...
Click to collapse
Awesome stuff man.
I decided to install Lupus Kernel (720p) and I failed so many times because ADB wasn't detecting my phone in fastboot and reason is because i use a mini usb hub (it connects into 1 hub and makes 5 hubs) so adb and fastboot dident have direct conntact with my phone and today i had a strange feeling and pluged it in to main usb port on my pc and it worked like a charm,i flashed lupus and i am enjoying it.
I think it is considerably faster that Doomkernel and smoother AND reliable,i used to get random force closes every now and then but now its super smooth and Touch screen response seems to be 100x better,
I also tried out your setup and shadowgun,Dead trigger(ULTRA GFX setting) and MC4 runs smooth at around 50 FPS
Glad I could help!
Sent from my R800i using xda app-developers app
Lupus ICS+GB Or Just Normal GB
Im Currently seeing what i can get the most speed out of what is better and does zram help with gaming
I don't think zRam helps with gaming that much,u might get 1-2 FPS boost
Sent from my R800i using xda app-developers app
Pizza_Dox said:
I don't think zRam helps with gaming that much,u might get 1-2 FPS boost
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Yes, it is true
Related
Now we have root on ARC, its high time we overclock it...
SetCpu doesn't work...
Can someone provide a comprehensive tutorial on overclocking and benchmarking ARC...???
First you need a custom kernel
and search..there's already a thread for this.
Sent from The Arc!
And also setcpu does work
Sent from my LT15i using XDA Premium App
festa20 is right setcpu is working on ARC.
yousif666 said:
festa20 is right setcpu is working on ARC.
Click to expand...
Click to collapse
Will try once again.. By the way whats the frequency you set your cpu on ???
Sent from my LT15i using XDA Premium App
adiktz said:
Will try once again.. By the way whats the frequency you set your cpu on ???
Sent from my LT15i using XDA Premium App
Click to expand...
Click to collapse
With "setCPU works" they just mean it works. you can't go above 1Ghz that's how it is for now.
Please, edit the tittle.
The speed of my heart have been increased
commodoor said:
With "setCPU works" they just mean it works. you can't go above 1Ghz that's how it is for now.
Click to expand...
Click to collapse
Exactly thats what I observed... That simply means it isn't workig as it should...!!!
Sent from my LT15i using XDA Premium App
That's because you don't know how setCPU works apparently
It works perfectly, setCPU allow you to modify the frequency of the processor within the range allowed by the kernel.
So once again, we need a custom kernel that modifies the voltage and frequencies allowed for setCPU to go higher than 1Ghz.
Just curious why do you wan't to overclock the phone, is it to slow?
What will happen if you overclock:
- higher battery drain
- Phone gets really hot
- it makes the cpu unstable
I never overclocked my phones and even the hero still runs fast.
piflechien said:
That's because you don't know how setCPU works apparently
It works perfectly, setCPU allow you to modify the frequency of the processor within the range allowed by the kernel.
So once again, we need a custom kernel that modifies the voltage and frequencies allowed for setCPU to go higher than 1Ghz.
Click to expand...
Click to collapse
The title says, "OverClocking"... I don't want to my cpu to work at lower freqs... I need overclocking...
Besides we r not here to discuss setCpu...
Waiting for custom Kernel...!!!
yup guys setcpu is working in our Arc in terms of 'battery saving' for now
overclocking is for later (or sooner i hope)
The MSM8255 can be overclocked to 1.8GHz on the Desire HD. I'll try to make an overclock kernel this week, but it's definately more work than I thought.
Sent from my Nexus S using XDA App
adiktz said:
Will try once again.. By the way whats the frequency you set your cpu on ???
Sent from my LT15i using XDA Premium App
Click to expand...
Click to collapse
If u know how to make a kernal go ahead so I can use more cpu but it works anyway the development isnt all too good at the minute but will be hopefully then we will have roms and hopefully kernals but u cant ***** about things if you cant try things your self just my opinion
Sent from my LT15i using XDA Premium App
Thijs96 said:
The MSM8255 can be overclocked to 1.8GHz on the Desire HD. I'll try to make an overclock kernel this week, but it's definately more work than I thought.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
And the dhd can run at 1998 ghz lol just correcting lol obviously its not the best of things to run at this but people do
Sent from my LT15i using XDA Premium App
commodoor said:
With "setCPU works" they just mean it works. you can't go above 1Ghz that's how it is for now.
Click to expand...
Click to collapse
Yes you are right the maximum is 1024 cant go any further i didn't know that he meant to go above 1024
before open such threads you should know about overclocking, of course setcpu wont enable overclock with stock kernel, why should it???
Speed is something which we always want more .. If we get Dual Core with 1.2Ghz still we need to over to push the limit. That's human nature ....
I have got overclocked Xperia Neo and when it was on 1.8 ghz it was 1. stable 2. cold 3. and really fast! but when you start to play somethink yes then it is really hot and it drain a battery too much I think oc is good.
Sorry for my bad English
I started this thread because i want to be able to use Sparksco kernel v14 but it freezes when its set to 1.0GHZ I been running v10 as my daily kernel and its bottomline on my top list of kernels. Any help will be much appreciated, im on the latest nightly CM255, i had to revert back to v10 because i need speed to check emails and surf the internet...If theres another update for the V14 in the future i hope that can be a fix or its probably my setup that prevents me from reaching any higher speeds, overall Sparksco you the man!!! By the way ICS devs yall get mad props peace...
I use sparks v14 kernel on cm nightly 255 clocked right under 1ghz using smartass governer no problem. I did a full wipe of everything, and formatted system before install of everything of course. Edit: I clocked it to 2ghz and no freezes here. Did you do a full wipe before the install of the ROM/kernel?
Sent from my PG06100 using xda premium
Hey sparksco, luv your kernels, can we get smartass2 included?
Sent from my PG06100 using XDA App
Wrong forum buddy. This is a development section.
This belongs in Q&A
Just for future reference.
notsointeresting said:
Wrong forum buddy. This is a development section.
This belongs in Q&A
Just for future reference.
Click to expand...
Click to collapse
I'm notsointeresting in hearing what u got to say but I get the point XDA supervisor...
peanjr said:
I use sparks v14 kernel on cm nightly 255 clocked right under 1ghz using smartass governer no problem. I did a full wipe of everything, and formatted system before install of everything of course. Edit: I clocked it to 2ghz and no freezes here. Did you do a full wipe before the install of the ROM/kernel?
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
I'm going to have to give that a shot homie...
Kernel v14 is more geared for battery saving. I haven't updated the voltages yet because I'm not compiling gingerbread anymore, rather been working on getting a stable ICS rom build before I do more work on it. As soon as we get ICS gingerbread will be a thing of the past. Kernel v14 works good for some and v10 for others. I like v14 because of the battery I've been able to get on 122mhz min and 998mhz max. But if you up the min to the next highest setting (230mhz) you shouldn't get any lockups. Or even try 307mhz.
Edit: looks like 307mhz min is the only clock speed that allows me to overclock to 2ghz and not have any lockups. I'm also on cm nightly 255 pzguzman, and I always keep it on smartass governor.
P.S. The mods should be able to move this thread no problem without removing the comments or thread.
Sent from my PG06100 using xda premium
Yeah, forgot to mention as sparks said, at 2ghz the min is at 307mhz.
Sent from my PG06100 using xda premium
sparksco said:
Kernel v14 is more geared for battery saving. I haven't updated the voltages yet because I'm not compiling gingerbread anymore, rather been working on getting a stable ICS rom build before I do more work on it. As soon as we get ICS gingerbread will be a thing of the past. Kernel v14 works good for some and v10 for others. I like v14 because of the battery I've been able to get on 122mhz min and 998mhz max. But if you up the min to the next highest setting (230mhz) you shouldn't get any lockups. Or even try 307mhz.
Edit: looks like 307mhz min is the only clock speed that allows me to overclock to 2ghz and not have any lockups. I'm also on cm nightly 255 pzguzman, and I always keep it on smartass governor.
P.S. The mods should be able to move this thread no problem without removing the comments or thread.
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
Oh okay i see Sparksco thanks for clarifying the setup, i dont mean to steer anybody in the wrong direction especially from working on a ICS BUILD which is the most highly anticipated OS for android. But im going to flash v14 and try out the setting and will get back and let you know thanx homie...
No luck but its amazing how you guys achieve the speeds... Tried the settings but my phone cant handle the pressure lol...Im gonna stick with this kernel tho... My bad for posting this thread in the wrong section its a rookie mistake...
peanjr said:
Yeah, forgot to mention as sparks said, at 2ghz the min is at 307mhz.
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
It worked i only needed to do a full wipe, thanx homie...
By the way Sparksco i got your setup on my rom, fully functional overclocked at the max with no feezes, thanx homie...
YOU'RE USING THE WRONG GOVERNOR MIN/MAX SETTINGS
For example:
IF I want to get 2ghz out of my phone I use the performance governor and use min/max of 2ghz.
OR:
I would use:
Gov: Smartass
Min CPU: 300mhz
Max CPU: 1.5ghz
You would freeze too if you were a CPU constantly going from 100mhz to 2000mhz all the time!
prguzman1978 said:
By the way Sparksco i got your setup on my my rom, fully functional overclocked at the max with no feezes, thanx homie...
Click to expand...
Click to collapse
Glad you got it working.
Sent from my PG06100 using xda premium
jefftet said:
Hey sparksco, luv your kernels, can we get smartass2 included?
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
Smartass2 was made for the HTC Sensation which is a dual core gsm phone much like the Evo 3D (but cdma instead). I could never get it to clock passed 1.4ghz so I don't think it likes our phones much. It's a great concept but the normal old smartass still works much better for the shift.
Sent from my PG06100 using xda premium
FWIW I am hitting 2.0Ghz with no lockups or anything. I previously had been using ScaryStable for a while and anything past 1.6Ghz would lock right up nearly immediately.
danibri82 said:
FWIW I am hitting 2.0Ghz with no lockups or anything. I previously had been using ScaryStable for a while and anything past 1.6Ghz would lock right up nearly immediately.
Click to expand...
Click to collapse
Again, it depends on the governor and the min cpu. I ran scary stable at 1.9ghz for 24 hours+ straight, no lockups.
for the heck of it I ran it @ the min of like 1something hz for the low and 2.0 max just to see how it ran, and it was solid.
danibri82 said:
for the heck of it I ran it @ the min of like 1something hz for the low and 2.0 max just to see how it ran, and it was solid.
Click to expand...
Click to collapse
I understand but say you ran scary at min 100mhz and max 1.9ghz with a gov of ondemand, that would freeze for sure on any phone.
VICODAN said:
I understand but say you ran scary at min 100mhz and max 1.9ghz with a gov of ondemand, that would freeze for sure on any phone.
Click to expand...
Click to collapse
I think what he's saying is that he ran this kernel (pershoot v14) with a low min and a high max and it ran fine.
Sent from my PG06100 using xda premium
Hey guys with all the quadrant scores being posted everywhere, I haven't seen a topic dedicated to these alone. So that's what this thread is for. Here are the rules:
Rule 1: when you post a quadrant please tell everyone what Rom/Kernel you are running so if anyone wishes to follow your steps they may do so.
Rule 2: Please merge your posts if your going to post one after another or simply edit your post and update it to maintain order.
That's it. Thanks guys and here is my quadrant. AOKP 40.1 devil .97 with v6 super charger and kak
Sent from my SCH-I500 using xda premium
It's a freakin' rocket-sled from hell it is!!
Fo realz yo!!!
AOKP 40.1
Devil3 .96
1400 max-200min, 800-200 sleep, no OC\UV
V6 Supercharged 100%, KAK with IO Sched(SIO) tweaks tweaks, 3G turbo
Yeah, it's pretty zippy, I must say!!!!
Azuma73 said:
Fo realz yo!!!
AOKP 40.1
Devil3 .96
1400 max-200min, 800-200 sleep, no OC\UV
V6 Supercharged 100%, KAK with IO Sched(SIO) tweaks tweaks, 3G turbo
Yeah, it's pretty zippy, I must say!!!!
Click to expand...
Click to collapse
Hey azuma how did you get your CPU so high? Also I need you to test something for me. Antutu tels me I'm pulling over 3200 in a quad. But quad pro tells me just over 2600. I'm unsure which to believe
Sent from my SCH-I500 using xda premium
I believe antutu runs more tests than quadrant, therefore showing a higher score, but I could be mistaken?
My phone IS fast and stable, but now I think I need to work on better battery!?
Sent from my SCH-I500 using xda premium
Dim your screen. Go to (I think development) and put a chexk in kill background processes and leave no programs running. I also use toolbox pro to freeze apps that continuously run and use the mobile web version of them.
Sent from my SCH-I500 using xda premium
Seems like you started this thread so we could show off each of our own tweaks and roms. I came here for a little advice too. That way I could see some big performance increases to my phone.
(first screen capture)
old rom: AOKP 40
old kernel: devil .79
old CPU governor: smartassv2
min-max frequency: 200-1400
(second screen capture)
Current rom: AOKP 40
Current kernel: devil .79
Current CPU governor: conservative
min-max frequency: 100-1400
I was curious I used the ROM setting built into the AOKP rom to set the cpu frequency, but should i use devil kernel config or manager or nstools. or is that just for live OC? My cpu frequency is set at boot. My quadrant scores are pretty low. Any tips for a noob?
MunkinDrunky said:
Seems like you started this thread so we could show off each of our own tweaks and roms. I came here for a little advice too. That way I could see some big performance increases to my phone.
Current rom: AOKP 40
Current kernel: devil .79
Current CPU governor: smartassV2
min-max frequency: 200-1400
I was curious I used the ROM setting built into the AOKP rom to set the cpu frequency, but should i use devil kernel config or manager or nstools. or is that just for live OC? My cpu frequency is set at boot. My quadrant scores are pretty low. Any tips for a noob?
Click to expand...
Click to collapse
Yeak I got a couple for ya.
Go to settings, Developer settings, then put a check mark in Force GPU Rendering Make sure the Max CPU is 1400 low is 100 Governer I have set to conservative, ZRam is set for 100mb. Try those settings and reboot before you test again
vrahn said:
Go to settings, Developer settings, then put a check mark in Force GPU Rendering Make sure the Max CPU is 1400 low is 100 Governer I have set to conservative, ZRam is set for 100mb. Try those settings and reboot before you test again
Click to expand...
Click to collapse
Ok I believe the Force GPU rendering definitely made the biggest difference. My 2d and 3d scores jumped up. I updated my post. For some reason in the ROM controls it took a couple tries for the new cpu and governor settings to stick after reboot.
5042 on my stock rooted gs3
Motorola Atrix4G
CM7
Oc'd to 1.45
Sent from my MB860 using xda app-developers app
ATRIXXIRTA said:
Motorola Atrix4G
CM7
Oc'd to 1.45
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Nice I/O score!!!
Sent from my SCH-I500 using xda app-developers app
vrahn said:
Nice I/O score!!!
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
Thanks!
Cm7 turns this phone into one of the beastlyiest devices going. Not sure if beastlyiest is a real word, but its a good way to describe the awesomeisity of Cm7.... haha I'm a grammar god!!
Sent from my MB860 using xda app-developers app
MunkinDrunky said:
Seems like you started this thread so we could show off each of our own tweaks and roms. I came here for a little advice too. That way I could see some big performance increases to my phone.
(first screen capture)
old rom: AOKP 40
old kernel: devil .79
old CPU governor: smartassv2
min-max frequency: 200-1400
(second screen capture)
Current rom: AOKP 40
Current kernel: devil .79
Current CPU governor: conservative
min-max frequency: 100-1400
I was curious I used the ROM setting built into the AOKP rom to set the cpu frequency, but should i use devil kernel config or manager or nstools. or is that just for live OC? My cpu frequency is set at boot. My quadrant scores are pretty low. Any tips for a noob?
Click to expand...
Click to collapse
MunkyDrunky that still seems a little low considering what everyone else is pulling. Try this as well. And I'll include the files from my phone when I get to my computer with instructions.
Get if not already had toolbox
And go to performance and SD card boost. Change the value to 2480 (I think it is. It will give you a preferred high set)
Go to app manager and freeze any constantly running services that you would normally use such as yahoo mail Facebook etc. And use the mobile web versions to help save ram. I'll include v6, 3G, and a few other files you'll need as well.
After the SD boost and app freeze reboot phone into recovery and wipe cache and dalvik. Then reboot and try your test again.
Sent from my SCH-I500 using xda app-developers app
vrahn said:
Get if not already had toolbox
And go to performance and SD card boost. Change the value to 2480 (I think it is. It will give you a preferred high set)
Click to expand...
Click to collapse
Ok Ive used Rom toolbox when I was using the Gummy rom. Would I still use devil kernel config or manager for the cpu and ram free value changes? How do I make sure the changes will always stick, ive had trouble with that after reboot.
vrahn said:
Go to app manager and freeze any constantly running services that you would normally use such as yahoo mail Facebook etc. And use the mobile web versions to help save ram. I'll include v6, 3G, and a few other files you'll need as well.
After the SD boost and app freeze reboot phone into recovery and wipe cache and dalvik. Then reboot and try your test again.
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
I should say my running apps are usually not many. Right now its Rom Control, Android keyboard, Maps, Nova Launcher, and Rom Toolbox, and Superuser. I test my gps a lot with Maps. Otherwise I dont have a lot running since this isnt my daily use phone. I want it to be again but want to get it flying first.
Thank you for the good advice and help. Trying SD boost now...will try v6 and 3g speed boost later
I use v6 supercharger, sd boost, and app quarantine while at 1300 MHz and I still only get around 1500...I feel like that's pretty low for AOKP MS6 with devil right?
rjkxb2 said:
I use v6 supercharger, sd boost, and app quarantine while at 1300 MHz and I still only get around 1500...I feel like that's pretty low for AOKP MS6 with devil right?
Click to expand...
Click to collapse
i also get very low scores on my fascinate.
What settings are you using with v6
Sent from my SCH-I500 using xda premium
vrahn said:
What settings are you using with v6
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
fix emissions, 3g enhancements, wheel alignment, minfrees: 8,14,55,70,85,100 MB. It says I'm 100% supercharged. I feel like there has been an improvement I'm just thinking I may have missed some setting that would help even more.
my galaxy s3 is just a little better than the fascinate.
Sent from my SCH-R530U using Tapatalk 2
sageDieu said:
View attachment 1195920
my galaxy s3 is just a little better than the fascinate.
Sent from my SCH-R530U using Tapatalk 2
Click to expand...
Click to collapse
I hit 5694 with mine today
My galaxy is blazing fast and battery is ok, this is what I did:
Clean install of ICS F4K mod R4 linaro + devil 3.0.84 linarI.
Then made following settings in devil kernel configuration tool :
Governor: smartassV2
Scheduler: vr
RAM: 403mb
ZRAM: on
ZRAM size: 150mb
Swappiness: 70 (default)
Devil idle: automatic
Smooth UI: on
Governor profile: normal
Ultra KSM: on
All other settings are default, no overclocking not OCing.
Then on the developer settings I turned in the GPU rendering.
This installations and settings are making my phone super responsive and fast. I hope it can help our fellows here which might be annoyed with laggy phones.
Good luck in trying it out.
PS- remember to back up your EFS folder before trying this out!
Stupid advertising...
Its a pity you see it in that way... I just wanted to give a helpful tip, since I've got much help from this forum. Regarding the comments in ROM and kernel, those are just my opinion. There are other amazing ROMs and kernels as well in here.
Where did you get devil3 0.84 from? -_- last I checked there's no GPU rendering option in devil kernel configuration
Sent from my GT-I9000 using xda app-developers app
Well my friend the options for GPU rendering is on Developer options...
Enviado de meu GT-P3113 usando o Tapatalk 2
focasam said:
Well my friend the options for GPU rendering is on Developer options...
Enviado de meu GT-P3113 usando o Tapatalk 2
Click to expand...
Click to collapse
Okay but where's the devil3 0.84 kernel?
Sent from my GT-I9000 using xda app-developers app
Helloworld294 said:
Okay but where's the devil3 0.84 kernel?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Those are kind of test version released by DerTeufel. You can find it in his threads. But not on the main page.
Smartass is slower than ondemand anytime.
Zram is lagging system for a better multitasking.
SmoothUI only works on Lulzactive.
UltraKSM is using more CPU and making overheads.
Force GPU rendering setting is making force close on apps and never increases smoothness.
Why EFS backup is needed before trying some simple settings?
Please do more than ticking some settings and research them before making a thread for telling that it imporives the performance like magic.
Ok open nstools and set this;
Governor: Ondemand
Treshold: %50
Sampling Rate: 20000
Schuelder: vr
Sent from my GT-I9000 using xda app-developers app
burakgon said:
Smartass is slower than ondemand anytime.
Zram is lagging system for a better multitasking.
SmoothUI only works on Lulzactive.
UltraKSM is using more CPU and making overheads.
Force GPU rendering setting is making force close on apps and never increases smoothness.
Why EFS backup is needed before trying some simple settings?
Please do more than ticking some settings and research them before making a thread for telling that it imporives the performance like magic.
Ok open nstools and set this;
Governor: Ondemand
Treshold: %50
Sampling Rate: 20000
Schuelder: vr
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Isn't lulzactive better than ondeman? Its a little slower but more battery friendly. Because it scales up slowly as the CPU load reaches the particular percentage (you can set it up via nstools)
Edit: SmoothUI can be applied to ondemand, smartassv2, and lulzactive. I think lagfree too but not sure.
Sent from my GT-I9000 using xda app-developers app
Helloworld294 said:
Isn't lulzactive better than ondeman? Its a little slower but more battery friendly. Because it scales up slowly as the CPU load reaches the particular percentage (you can set it up via nstools)
Edit: SmoothUI can be applied to ondemand, smartassv2, and lulzactive. I think lagfree too but not sure.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
If you like it FAST, why do you care about this minimal battery plus?
dark_knight35 said:
If you like it FAST, why do you care about this minimal battery plus?
Click to expand...
Click to collapse
I never said I liked it FAST bro... I just corrected burakgo a little.
Sent from my GT-I9000 using xda app-developers app
Helloworld294 said:
I never said I liked it FAST bro... I just corrected burakgo a little.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
But your setup is sh**.
dark_knight35 said:
But your setup is sh**.
Click to expand...
Click to collapse
To you. Why should I care? Stop trolling bro. I didn't even give a "setup" I said lulzactive is damn better than ondemand comprende? Nothing else. Re-read the post.
Sent from my GT-I9000 using xda app-developers app
Helloworld294 said:
To you. Why should I care? Stop trolling bro. I didn't even give a "setup" I said lulzactive is damn better than ondemand comprende? Nothing else. Re-read the post.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
???.....this whole post is about your setup......don't inflame the trolls.....we hunt in packs!
Helloworld294 said:
Okay but where's the devil3 0.84 kernel?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Hi, you can find the kernel from here:
http://forum.xda-developers.com/showthread.php?t=1727812
Remember to back up your EFS folder before flashing F4k
ROM. (just in case)
These settings are working good enough for me.
slaphead20 said:
???.....this whole post is about your setup......don't inflame the trolls.....we hunt in packs!
Click to expand...
Click to collapse
DUDE its kblos thread about his setup... read the OP.
Sent from my GT-I9000
Post some benchmarks man .....before saying its the fastest...
burakgon said:
Ok open nstools and set this;
Governor: Ondemand
Treshold: %50
Sampling Rate: 20000
Schuelder: vr
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
What does the treshold and sampling rate actually do?
I'm using the default settings of Ondemand atm;
Treshold: %80
Sampling Rate: 35000
Vertron said:
What does the treshold and sampling rate actually do?
I'm using the default settings of Ondemand atm;
Treshold: %80
Sampling Rate: 35000
Click to expand...
Click to collapse
Threshold is a value in %. As soon as the CPU load is higher than the (up)threshold is, CPU scales up. The sampling rate shows how often the CPU scales(looks for the CPU load and decides to scale up/down or stay on the current frequency).
burakgon said:
Smartass is slower than ondemand anytime.
Zram is lagging system for a better multitasking.
SmoothUI only works on Lulzactive.
UltraKSM is using more CPU and making overheads.
Force GPU rendering setting is making force close on apps and never increases smoothness.
Why EFS backup is needed before trying some simple settings?
Please do more than ticking some settings and research them before making a thread for telling that it imporives the performance like magic.
Ok open nstools and set this;
Governor: Ondemand
Treshold: %50
Sampling Rate: 20000
Schuelder: vr
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
you're quite right here, but one correction.. SmoothUI works with every governor. It has been this way for a long time now. It's easy to test with the help of CPU spy
Sent from my GT-I9000 using Tapatalk 2
I know polls existed like this before but I was curious which governors are most commonly used in my gingertiny and incredikernel kernels as there are quite a few options though looking at the list not too many. I didn't put performance on the list even though it's an option in my kernels or at least one of them as it's not great on battery. Feel free to post comments about why you choose it. My choice is actually smartassV2 but there are other good ones as well.
I voted for lag free, but smartassV2 is a close second. I have always used smartass and smartassV2, untill lagfree was introduced. Lagfree just seems to have a little better balance between speed and battery consumption, at least in my opinion.
Been using sa2 but switched back to lag free and all is back to being smooth on ics linaro.
Sent from my ADR6300 using xda premium
I've been using lagfree on jb but I'm torn between it and smarassv2.
Sent from my Nexus 7 using XDA Premium HD app
I've been using lazy because smartassv2 was unstable in cm7. should i use lagfree instead??
Sent from my ADR6300 using xda app-developers app
zombolt said:
I've been using lazy because smartassv2 was unstable in cm7. should i use lagfree instead??
Sent from my ADR6300 using xda app-developers app
Click to expand...
Click to collapse
Try it but I always though sav2 was fine. The issue may be voltage.
Sent from my Galaxy Nexus using Tapatalk 2
I've always used SmartassV2. It's hard to spot a difference changing govs in normal everyday use imo
Sent from OG Incredible using Tapatalk 2
Interactive x for my dinc conservative for my gnex. Anything wrong with using either of those?
Sent from my Galaxy Nexus
Sav2
http://forum.xda-developers.com/showthread.php?t=1767797
Good read on Gov's.nice explanation of how each Gov scales the CPU under load/idle
Which i personally found helpful since i wasn't sure what the difference between each gov was. Of coarse excluding the obvious ones powersave/conservative etc
Thanks for the read - It's tough to wade through all the differences all over the web, so seeing a single spot for all the info like that is great.
i use smartassV2, it seems to work better than the rest do for me
Using lazy on ics and jb roms, seems just as good as sav2 but with better battery.
Sent from my HTC Droid Incredible
I tend to use whatever the default is for the ROM/kernel I'm running.
Smav2
Sent from my HTC Droid Incredible using xda app-developers app
Smartass V2
Sent from my GT-P7510 using Tapatalk 2
How Important is it to change the I/O
After you choose the governor how important is it to choose the right I/O.
It may be worth giving interactive another chance in the latest incredikernel releases.
Sent from my Galaxy Nexus using Tapatalk 2
ms372591 said:
After you choose the governor how important is it to choose the right I/O.
Click to expand...
Click to collapse
Deadline, noop and sio are about even. Noop may be a bit quicker.
Sent from my Galaxy Nexus using Tapatalk 2
Both smartassv2 and lagfree have worked well for me. If there is a difference, so far I haven't been able to tell
Where can I get CPU governor lag free? Is it compatible with miui gb?
Sent from my ADR6300 using xda app-developers app