Jb Update with unlocked Bootloader :) - RAZR i General

I have the firmware update made ​​on German.
instructions:
1.
Flash firmware from France with RSD Light(CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSVFFR_P045_A006_S1FF_fb.xml)
2.
Resetting the new firmware
3.
'm looking to update
4.
Download JB
5.
reset settings and firmware
6.
reboot
7.
Root with the Jb RAZRiRoot2
8.
have fun with jb
warning:
they need bootloader unlocked
should not it work flash with stock recovery e2
Blur_Version.81.5.39001.XT890.Vodafone.en.FR
Push Thanks if I've helped them

Related

[GUIDE] Downgrading from ICS to Gingerbread i9000

I write this guide to help you, since I've had problems downgrading from ICS to Gingerbread.
Things you need:
1. Samsung drivers
2. Stock Gingerbread firmware with individual files (including bootloaders) I used JVZ Firmware
3. Odin
Procedure:
1. Install Samsung Mobile Drivers
2. Open Odin
3. Get the phone to the Download Mode by pressing(VolumeDown+Home+Power) buttons and connect the phone to your PC (your phone should be recognized)
4. Select PIT (usually 512)
5. Select BOOTLOADER (APBOOT)
6. Select PDA (CODE)
7. Select PHONE (MODEM)
8. Select CSC (CSC)
9. If 'Re-Partition'is not checked under 'Option', check it.
10. Press the Start button
Note:
If you want to upgrade to a later firmware (eg JW6 - It has only one .tar file),
1. go to the Download Mode again select the file under PDA.
2. DO NOT select the PIT, BOOTLOADER, PHONE, CSC files.
3. DO NOT check 'Re-Partition'.
4. Press the START button.
Hope this post helped you.
Thanks!
Enviado desde mi GT-I9000 usando Tapatalk 2
koko98 said:
Thanks!
Enviado desde mi GT-I9000 usando Tapatalk 2
Click to expand...
Click to collapse
I am glad it helped.
Stuck!
Your posting is very timely! Wife's i9000 on CM9 is acting up (wifi loop, random rebooting, and low memory errors). So I want to downgrade to my nandroid back-up with CM 7.1 or at least fresh install CM 7.2. BUT I keep ending up with my back-up on top of CM 9 boot and then getting stuck with a boot loop.
I'm guessing I need to revert to a Gingerbread boot then I can restore the nandroid backup or then upgrade to CM 7.2. I read your posting but I'm not clear where I can get the needed bootloaders. Would be great if I could skip reinstalling stock and just go straight to CM 7 (whatever version) as then I wouldn't have to reunlock the bootloader.
Suggestions? Thanks in advance.
The problem could be the version of CWM... both are v5? they said that nandroid backup of cwm 3 have some issues on cwm 5 (CM9 comes with cwm5).
ConfuciusTse said:
Your posting is very timely! Wife's i9000 on CM9 is acting up (wifi loop, random rebooting, and low memory errors). So I want to downgrade to my nandroid back-up with CM 7.1 or at least fresh install CM 7.2. BUT I keep ending up with my back-up on top of CM 9 boot and then getting stuck with a boot loop.
I'm guessing I need to revert to a Gingerbread boot then I can restore the nandroid backup or then upgrade to CM 7.2. I read your posting but I'm not clear where I can get the needed bootloaders. Would be great if I could skip reinstalling stock and just go straight to CM 7 (whatever version) as then I wouldn't have to reunlock the bootloader.
Suggestions? Thanks in advance.
Click to expand...
Click to collapse
A nicely written, well laid out, concise guide, nice work
Sent from my GT-I9000 using xda premium
adding the bootloader, imho isn't necessary. personally I never use them, just PDA+MODEM+CSC.
512.PIT is mandatory (yaffs2 -> rfs) , GB bootloader won't do any harm.
In case the update sequence was Froyo -> ICS, downgrade to GB will require GB bootloader.
Hi
ive download a stock odin rom from http://www.sammobile.com
but the file does not contain a PIT file
can some one please post one that i can use
im currently running the remICS rom and want to flash the latest rom for my country that ive download from http://www.sammobile.com/firmware/?page=8&view=4643
thanks
here: Odin + pit
same package as sammobile, w/o zip-password.
has 3 pit files, use pit-512 only!
ive download 2 diffrent stock odim roms but when i flash them i just get boot loops
both of the roms ive downloaded contain the one tar file so i flash it per OP
but i just get reboots so i have to reinstall the ics rom
can some one post a link to a GB rom that has all of pit,bootloader,pds,phone and csc in the one file
thanks
Ignore that last message
Downloaded one from http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using xda premium
Thank you
Thank you for the simple guide I downgraded from ICS to JW6 and got stuck in a bootloop, your guide helped me out of that
Thanks man, brilliant guide. Helped me a lot.
As I was busy I couldn't reply to all posts but I am happy this helped you all.
Do we really need a repartition ?
Can we downgrade from ICS to GB without this ?
Most of the forum suggest not to do that as it can lead to hard brick.
sk76 said:
Do we really need a repartition ?
Can we downgrade from ICS to GB without this ?
Most of the forum suggest not to do that as it can lead to hard brick.
Click to expand...
Click to collapse
Do you have any better option to switch from ext4 to rfs?
Odin + PIT 512 + repartition prepare partition layout for Samsung stock ROM using rfs.
http://forum.xda-developers.com/showthread.php?t=999097
Thanks...
what if i am on a custom ROM like CM9,are the steps the same to going back to stock?
CM9 = ICS = Android 4.0.4
SCIENTYREAL said:
I write this guide to help you, since I've had problems downgrading from ICS to Gingerbread.
Things you need:
1. Samsung drivers
2. Stock Gingerbread firmware with individual files (including bootloaders) I used JVZ Firmware
3. Odin
Procedure:
1. Install Samsung Mobile Drivers
2. Open Odin
3. Get the phone to the Download Mode by pressing(VolumeDown+Home+Power) buttons and connect the phone to your PC (your phone should be recognized)
4. Select PIT (usually 512)
5. Select BOOTLOADER (APBOOT)
6. Select PDA (CODE)
7. Select PHONE (MODEM)
8. Select CSC (CSC)
9. If 'Re-Partition'is not checked under 'Option', check it.
10. Press the Start button
Note:
If you want to upgrade to a later firmware (eg JW6 - It has only one .tar file),
1. go to the Download Mode again select the file under PDA.
2. DO NOT select the PIT, BOOTLOADER, PHONE, CSC files.
3. DO NOT check 'Re-Partition'.
4. Press the START button.
Hope this post helped you.
Click to expand...
Click to collapse
Possible to downgrade for GT-P1000

Downgrade from 4.3 to 4.1.2

My phone have
Custom Binary count: No.
Device status: Official.
In the setting>about device>status>device status:Normal. Now, I'm getting on 4.1.2 from MJ5 4.3. I used the followings
1. flash the respective official 4.1.2 firmware from sammobile.com. after finish flashing , go to recovery mode and wipe data.
2. flash Philz recovery via Odin.
3. install updated 4.1.2 modem (XXDME4 / DXDMF1 / DDMG1) from http://forum.xda-developers.com/showthread.php?t=2044937 via CWM (at this step you should get IMEI back.)
4. root the device with CF-auto root.(CF-Auto-Root-t03g-t03gxx-gtn7100.tar)
5. install Triangle away to reset flash counter.
6. full unroot super SU
7. wipe all data/factory reset .
Check the device status in setting. And then go to download mode to check again.
I'm not sure is this steps working on every Galaxy note 2 N7100. But actually I've been downgraded to 4.1.2 and I can get OTA also (already checked).
I decided to downgrade my N7100 because most of the custom roms use high RAM usage.
When at the firmware upgrade fail status,
1. Just flash "Philz recovery" via Odin.
2. After finished, Long press Vol up + Home + Power button to get into recovery mode.
3. Choose Wipe data/factory reset and "CLEAN TO IN STALL NEW ROM"
All of this step finished, Go to download mode "Vol down + Home + Power button" and flash the firmware (4.3 or 4.1.2 again).
NOTICE.
Dear all,
The latest 4.3 official firmware (MK4 or later ) has KNOX enabled bootloader and can't be downgrade. So, don't try to downgrade If your bootloader is KNOX enabled.
[email protected] said:
My phone have
Custom Binary count: No.
Device status: Official.
In the setting>about device>status>device status:Normal. Now, I'm getting on 4.1.2 from MJ5 4.3. I used the followings
1. flash the respective official firmware from sammobile.com
2. flash Philz recovery via Odin.
3. install respective modem from http://forum.xda-developers.com/showthread.php?t=2044937 via CWM (at this step you should get IMEI back.)
4. root the device with CF-auto root.
5. install Triangle away to reset flash counter.
6. flash Dr.ketan multitool to restore old recovery.
7. full unroot super SU
8. wipe all data/factory reset .
Check the device status in setting. And then go to download mode to check again.
I'm not sure is this steps working on every Galaxy note 2 N7100. But actually I've been downgraded to 4.1.2 and I can get OTA also (already checked).
Click to expand...
Click to collapse
I tried this today but failed, my questions are:
1. flash the respective official firmware from sammobile.com (What firm you flashed? post please a link)
2. flash Philz recovery via Odin. (I asumme you writed this file philz_touch_5.15.0-n7100.tar.md5
3. install respective modem from http://forum.xda-developers.com/showthread.php?t=2044937 via CWM (at this step you should get IMEI back.) what modem exactly?
4. root the device with CF-auto root. (What version of CF-auto root?)
Thank you for clarifications!
Remove KNOX bootloader to return to stock - using Dr. Ketan Method
Hi Guys,
I just want you opinion before i do this step. Hence asking
KNOX enabled boot loader has messed up my idea of return to Stock either via KIES or via ODIN.
I flashed the official Indian 4.3 ROM on my EU model NOTE 2 over the leaked ROM with MJ5 and it failed. I couldn't recover the phone with KIES either.
KIES will say that firmware update / emergency recovery has encounterd an error.
ODIN says FAIL and "Device Unsupported" appears in Download screen.
Shall i try Dr. Ketan's KNOX bootloader removal method to get my mobile back ? ( http://forum.xda-developers.com/showthread.php?t=2500823 )
Can i then flash the original firmware N7100XXDMF1 on my Note 2 (EU version) ?
Would appreciate if you guys could help me on this.
I can still access the download mode with KNOX boot loader.
Thanks
Raklm said:
I tried this today but failed, my questions are:
1. flash the respective official firmware from sammobile.com (What firm you flashed? post please a link)
2. flash Philz recovery via Odin. (I asumme you writed this file philz_touch_5.15.0-n7100.tar.md5
3. install respective modem from http://forum.xda-developers.com/showthread.php?t=2044937 via CWM (at this step you should get IMEI back.) what modem exactly?
4. root the device with CF-auto root. (What version of CF-auto root?)
Thank you for clarifications!
Click to expand...
Click to collapse
for the questions, regarding to...
1. I used the "N7100XXDME1_N7100OLBDMD2_N7100DXDLK5_HOME.tar"
2. "philz_touch_5.15.0-n7100.tar "
3. I used "modem_XXDME4" and get IMEI back at this stage.
4. CF auto root "CF-Auto-Root-t03g-t03gxx-gtn7100.tar"
I will attach all respective screenshots later because of my slow connection . ENJOY!
Raklm said:
I tried this today but failed, my questions are:
1. flash the respective official firmware from sammobile.com (What firm you flashed? post please a link)
2. flash Philz recovery via Odin. (I asumme you writed this file philz_touch_5.15.0-n7100.tar.md5
3. install respective modem from http://forum.xda-developers.com/showthread.php?t=2044937 via CWM (at this step you should get IMEI back.) what modem exactly?
4. root the device with CF-auto root. (What version of CF-auto root?)
Thank you for clarifications!
Click to expand...
Click to collapse
Please, tell us where (which step) you failed, to avoid future misunderstandings.
==
TomeG2kc
I am using Indian 4.3 rom on my EU device (N7100 Note 2)
It use Know enabled Bootloader.
* When I try to flash MJ5 bootloader with Odin, it failed. (incorrect version)
* When I try to flash EU 4.1.2 rom with Odin, it failed. (incorrect version)
Is there a way to downgrade to EU 4.1.2 rom? I guess NO
hsahin4 said:
I am using Indian 4.3 rom on my EU device (N7100 Note 2)
It use Know enabled Bootloader.
* When I try to flash MJ5 bootloader with Odin, it failed. (incorrect version)
* When I try to flash EU 4.1.2 rom with Odin, it failed. (incorrect version)
Is there a way to downgrade to EU 4.1.2 rom? I guess NO
Click to expand...
Click to collapse
Try change Odin to 3.09 version, maybe this help.
Wysłane z mojego GT-N7100 przy użyciu Tapatalka
hsahin4 said:
I am using Indian 4.3 rom on my EU device (N7100 Note 2)
It use Know enabled Bootloader.
* When I try to flash MJ5 bootloader with Odin, it failed. (incorrect version)
* When I try to flash EU 4.1.2 rom with Odin, it failed. (incorrect version)
Is there a way to downgrade to EU 4.1.2 rom? I guess NO
Click to expand...
Click to collapse
Right now, there is no way ti downgrade the bootloader once you've updated to the official 4.3... however dr. Ketan said he will start to work on it soon
Sent from my GT-N7100 using XDA Premium 4 mobile app
manan999583 said:
Right now, there is no way ti downgrade the bootloader once you've updated to the official 4.3... however dr. Ketan said he will start to work on it soon
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So, what is that below?
[email protected] said:
My phone have
Custom Binary count: No.
Device status: Official.
In the setting>about device>status>device status:Normal. Now, I'm getting on 4.1.2 from MJ5 4.3. I used the followings
1. flash the respective official firmware from sammobile.com. after finish flashing , go to recovery mode and wipe data.
2. flash Philz recovery via Odin.
3. install updated 4.1.2 modem (XXDME4 / DXDMF1 / DDMG1) from http://forum.xda-developers.com/showthread.php?t=2044937 via CWM (at this step you should get IMEI back.)
4. root the device with CF-auto root.(CF-Auto-Root-t03g-t03gxx-gtn7100.tar)
5. install Triangle away to reset flash counter.
6. full unroot super SU
7. wipe all data/factory reset .
Check the device status in setting. And then go to download mode to check again.
I'm not sure is this steps working on every Galaxy note 2 N7100. But actually I've been downgraded to 4.1.2 and I can get OTA also (already checked).
I decided to downgrade my N7100 because most of the custom roms use high RAM usage.
Click to expand...
Click to collapse
Wysłane z mojego GT-N7100 przy użyciu Tapatalka
This is only for the at&t at the moment but it might be of some use
http://forum.xda-developers.com/showthread.php?t=2502464
Sent from my GT-N7105 using XDA Premium 4 mobile app
prasanthkb said:
Hi Guys,
I just want you opinion before i do this step. Hence asking
KNOX enabled boot loader has messed up my idea of return to Stock either via KIES or via ODIN.
I flashed the official Indian 4.3 ROM on my EU model NOTE 2 over the leaked ROM with MJ5 and it failed. I couldn't recover the phone with KIES either.
KIES will say that firmware update / emergency recovery has encounterd an error.
ODIN says FAIL and "Device Unsupported" appears in Download screen.
Shall i try Dr. Ketan's KNOX bootloader removal method to get my mobile back ? ( http://forum.xda-developers.com/showthread.php?t=2500823 )
Can i then flash the original firmware N7100XXDMF1 on my Note 2 (EU version) ?
Would appreciate if you guys could help me on this.
I can still access the download mode with KNOX boot loader.
Thanks
Click to expand...
Click to collapse
Same problem here
I flashed the 4.3 indian version. After 40 minutes it doesn't finished and my laptop battery is discharged. When i switch on the phone, it shows me the message error "firmware upgrade encountered".
Kies doesn't work.
I'm not able to enter in the recovery mode. I'm able to enter in the download mode. If i try to flash the rom again with odin, it shows me this error:
Any suggestion? thanks
flash recovery thru odin then maybe restore a nand backup or flash the new rom via cwm
So is there some other here already tried this step and got success??? please post location and if your from custom rom or from official rom? thanks
prasanthkb said:
Hi Guys,
I just want you opinion before i do this step. Hence asking
KNOX enabled boot loader has messed up my idea of return to Stock either via KIES or via ODIN.
I flashed the official Indian 4.3 ROM on my EU model NOTE 2 over the leaked ROM with MJ5 and it failed. I couldn't recover the phone with KIES either.
KIES will say that firmware update / emergency recovery has encounterd an error.
ODIN says FAIL and "Device Unsupported" appears in Download screen.
Shall i try Dr. Ketan's KNOX bootloader removal method to get my mobile back ? ( http://forum.xda-developers.com/showthread.php?t=2500823 )
Can i then flash the original firmware N7100XXDMF1 on my Note 2 (EU version) ?
Would appreciate if you guys could help me on this.
I can still access the download mode with KNOX boot loader.
Thanks
Click to expand...
Click to collapse
dbanzon said:
flash recovery thru odin then maybe restore a nand backup or flash the new rom via cwm
Click to expand...
Click to collapse
I'm able to flash the recovery thru odin, just do it and now i'm able to boot in recovery mode.
But i'm not able to flash the new rom via cwm because i'm not able to mount the sd card (it works only as usb storage, not as sd card mode and so i'm not able to upload the rom file on it).
I can find a solution for this, but i'm not sure it will work because now i have the knox firmware (warranty bit 1) and it isn't downgradable. Am i right?
thanks
I had to restore my efs data in order to downgrade back to 4.1.2.
Sent from my GT-N7100 using Tapatalk
EP2008 said:
I had to restore my efs data in order to downgrade back to 4.1.2.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
so how were you able to dngrade back to 4.1.2? u followed the instructions in the first post?
Downgrading from 4.3
[email protected] said:
1. flash the respective official firmware from sammobile.com. after finish flashing , go to recovery mode and wipe data.
2. flash Philz recovery via Odin.
3. install updated 4.1.2 modem (XXDME4 / DXDMF1 / DDMG1) from http://forum.xda-developers.com/showthread.php?t=2044937 via CWM (at this step you should get IMEI back.)
4. root the device with CF-auto root.(CF-Auto-Root-t03g-t03gxx-gtn7100.tar)
5. install Triangle away to reset flash counter.
6. full unroot super SU
7. wipe all data/factory reset .
.[/B][/COLOR]
Click to expand...
Click to collapse
Hi, in step 1. Is it official 4.3 or 4.1.2 because I tried with official 4.1.2, I get failed.
dbanzon said:
so how were you able to dngrade back to 4.1.2? u followed the instructions in the first post?
Click to expand...
Click to collapse
I don't recall the exact steps, but I flashed my old 4.1.2 stock rom through philz recovery then ran the efs restore through dr. Ketans multi tool. Before the efs restore I would get boot loops at the Samsung logo.
Sent from my GT-N7100 using Tapatalk
diaBoliQu3 said:
Hi, in step 1. Is it official 4.3 or 4.1.2 because I tried with official 4.1.2, I get failed.
Click to expand...
Click to collapse
Do full wipe and try that again.
19malag83 said:
I'm able to flash the recovery thru odin, just do it and now i'm able to boot in recovery mode.
But i'm not able to flash the new rom via cwm because i'm not able to mount the sd card (it works only as usb storage, not as sd card mode and so i'm not able to upload the rom file on it).
I can find a solution for this, but i'm not sure it will work because now i have the knox firmware (warranty bit 1) and it isn't downgradable. Am i right?
thanks
Click to expand...
Click to collapse
Follow the instructions in the link, it should solve your problems. I had the same problem some days back.
http://www.droidviews.com/firmware-upgrade-encountered-an-issue-solution/

I9023 [Nexus S] Odin Stock Firmware

Deleted
re Official Google Stock Firmware Build JZ054K Android 4.1.2 Odin Firmware
style2345 said:
Dear Friends ,
Here Is The Official Google Stock Firmware Build JZ054K Android 4.1.2 Odin Flashable Firmware
Just Put The Phone In Download Mode & Flash With Odin , No Need To Unlock Bootloader & Other Things..
Make Sure You Have Samsung USB Driver Installed..
Click to expand...
Click to collapse
Thank you for this but im not sure how to flash this i see
boot loader and pda imgs i get them what do i do with modem and dgs imgs?
and what is the dgs img?
EDIT..
I got the pda img installed but the other 3 images would not install in odin
I tried boot loader in bootloader spot checked it and it verified chksum but did not send it same with the other 2 tried modem in phone space and dgs in csc space it checked them but did not flash them
Thanks for sharing

Best method to unlock grouper 4.3

Just got my N7 wifi back from Asus after their lollipop update bricked it.
It came back installed with 4.3 (nakasi update version JWR66Y).
What is the recommended method to unlock it so I can flash twrp via fastboot and install CM12.1?

Flashing stock ROM

Hi guys,I have SM-G900F ,i rooted my phone and installed TWRP,after some time i unrooted with SuperSu,now i cant update my phone and i want to flash Stock ROM so i could update it normally through OTA update.I saw in Phone info that my CSC code is SEE(South East Europe),so i downloaded that firmware and Odin but i need little bit more information.Im scared if i get in bootloop or brick my phone,any suggestions to do before flashing stock ROM?Thanks
w0ny said:
Hi guys,I have SM-G900F ,i rooted my phone and installed TWRP,after some time i unrooted with SuperSu,now i cant update my phone and i want to flash Stock ROM so i could update it normally through OTA update.I saw in Phone info that my CSC code is SEE(South East Europe),so i downloaded that firmware and Odin but i need little bit more information.Im scared if i get in bootloop or brick my phone,any suggestions to do before flashing stock ROM?Thanks
Click to expand...
Click to collapse
Put the phone into download mode
Connect to PC USB
Check ODIN has the COM port highlighted at the top
Add the stock ROM to AP in ODIN
When it is ready, press Start
When ODIN is finished flashing, it will reboot your phone into your new stock ROM
Stock ROM running on your phone after that will be able to take OTA updates (As long as you don't root / custom recovery)
If you want root and custom recovery again, just do the same as you did last time, and each time you want to update, just follow the above, that's how I update

Categories

Resources