Flashing stock ROM - Galaxy S 5 Q&A, Help & Troubleshooting

Hi guys,I have SM-G900F ,i rooted my phone and installed TWRP,after some time i unrooted with SuperSu,now i cant update my phone and i want to flash Stock ROM so i could update it normally through OTA update.I saw in Phone info that my CSC code is SEE(South East Europe),so i downloaded that firmware and Odin but i need little bit more information.Im scared if i get in bootloop or brick my phone,any suggestions to do before flashing stock ROM?Thanks

w0ny said:
Hi guys,I have SM-G900F ,i rooted my phone and installed TWRP,after some time i unrooted with SuperSu,now i cant update my phone and i want to flash Stock ROM so i could update it normally through OTA update.I saw in Phone info that my CSC code is SEE(South East Europe),so i downloaded that firmware and Odin but i need little bit more information.Im scared if i get in bootloop or brick my phone,any suggestions to do before flashing stock ROM?Thanks
Click to expand...
Click to collapse
Put the phone into download mode
Connect to PC USB
Check ODIN has the COM port highlighted at the top
Add the stock ROM to AP in ODIN
When it is ready, press Start
When ODIN is finished flashing, it will reboot your phone into your new stock ROM
Stock ROM running on your phone after that will be able to take OTA updates (As long as you don't root / custom recovery)
If you want root and custom recovery again, just do the same as you did last time, and each time you want to update, just follow the above, that's how I update

Related

[Q] [SOLVED] Stuck in download mode! - Bricked?

Hey guys!
When i boot my phone i get this error:
"firmware upgrade encountered an issue. please select recovery mode in kies and try again"
I can't flash access recovery or Android OS, and i can't flash from Odin (No PIT-partition error)
What to do???
I am almost panicking - my phone didn't work earlier today because of CWM, so i tried to flash TWRP from Odin, and now I am screwed again!!
It this fixable?
Please help me
Thanks in advance
First thing you need to do is stop panicing. That will only make things worse. If you start messing with your phone, then prepare yourself that these things happen.
Also, there is little usefull information in your thread. If you want help, I suggest you make more work of you topic. What rom were you on? What did you do with CWM? What version where you on? What version of TWRP?
Can't you just flash CWM again and then flash a custom rom? If not, then try:
1. Do you have knox enabled bootloader?
2. If so, then flash any stock rom with a knox bootloader.
3. If not, then flash a stock rom without a knox bootloader.
4. Root again and flash recovery again.
5. Flash custom rom.
re: odin flash
velein said:
Hey guys!
When i boot my phone i get this error:
"firmware upgrade encountered an issue. please select recovery mode in kies and try again"
I can't flash access recovery or Android OS, and i can't flash from Odin (No PIT-partition error)
What to do???
I am almost panicking - my phone didn't work earlier today because of CWM, so i tried to flash TWRP from Odin, and now I am screwed again!!
It this fixable?
Please help me
Thanks in advance
Click to expand...
Click to collapse
Be sure you have or get the official stock odin flash rom for your phone baseband/model
number from SamMobile.com. They only have official stock roms their with exact model
and basebands.
Make sure the battery is at least 50% charged.
Open odin and set it up so it's ready to flash.
Then remove the battery for 10 seconds & replace the battery then then hold/press the vol-down
and the power button at the same time until the phone is in download mode.
Connect the usb cable from computer to phone and then:
Be sure ODIN is ready to start, if it is then start the odin flash.
Have patience, after the flash it can take up to 4-5 minutes for
the phone to go thru the initial boot.
REMEMBER, only flash official and specific odin flash rom which is designed for
your phone's baseband and model number. Double check before flashing to be sure.
Also to avoid problems in the future, once you get your phone working properly
uninstall kies on your phone and in your computer.
Kies is really not required unless you plan to stay STOCK/UN-ROOTED and don't
plan to flash any custom roms, mod's, themes.
Good luck!
Solved it by using this guide:
http://forum.xda-developers.com/showthread.php?t=2265477
had to change to USB3.0-port before i could flash without getting an error.
Thanks for the help guys.

[Q] Cannot flash i9505...no boot loader

Hello,
I have an unsuccessful firmware update.
First flashed the last stock rom, cf-autoroot. After it I try to flash the CWM, and this is the end,
Now there is no boot loader, no recovery. I see the "Firmware update encountered an issue...".
The knox is 0x1, Writeprotect enabled.
The only thing is working on the phone is the download mode, but every attempt to flash in Odin fails. (aboot.mng..Fail)
I tried to flash another bootloaders, repartition with pit file, but not works...
Done it on other PC, usb ports...
Now I know what was the wrong with the installation, but I need a solution for this situation.
Please, help me...
You will have to flash through ODIN Kit Kat. You cant come back to 4.3 or 4.2.2 if ya flashed android 4.4.2 and u updated the bootloader. Select one android 4.4.2 firmware in SamMobile for you and update ur phone :highfive:
Thanks for the reply...
The last firmware I flashed was 4.3, and I cannot reflash it.
But I will try a Kit Kat, which one is good for me? I have an unlocked phone and my country (Hungary) does not have it yet.
Can I flash it with knox 0x1?
Thanks for the advice, the phone is working now....
The whole story:
- the phone had 4.3 custom ROM before.
- I flashed the new version with 4.4.2: new recovery, modem and ROM.
- From here I had no sound. I tried to flash everything 3 times, an no sound.
- I searched for this, threre were many good advice, I tried some and the phone not booted.
- Downloaded the latest Samsung firmware (I9505XXUEMKF_I9505OXXEMK3_I9505XXUEMKF), flashed and no sound.
- extracted the modem.bin, flashed, and flashad the ROM again, sound is good, I was very happy.
- CF-autoroot, I saw it was working
- Flashed the CWM recovery, Fail in Odin and...no boot, no recovery, only download mode.
- Flashing the original downloaded firmware (I9505XXUEMKF_I9505OXXEMK3_I9505XXUEMKF) is failed. I don't understand, it is not downgrade...
- Flashing a new Kit Kat (I9505XXUFNB9_I9505EURFNB1_I9505XXUFNB9) was successful.
How can I use a custom ROM again?
I am afraid, if I make an error, cannot flash again the same, I have to wait a new one?

[Q] I9500 flash gone wrong, need help please

HI Guys,
I flashed the Lollipop 5.0.1 CHN firmware and rooted the phone to install the Google apps, then when the India Firmware came i tried to flash that via Odin, it failed. and bricked the phone, could get into download mode but all firmware i've tried fails.
i tried numerous thing to a point where i can now only get CWM- recovery or TWRP open recovery on the phone, and then it allows me to get back into download mode with swver A3, but Odin still fails almost immediately.
help would be much appreciated
regards
Brendan
Vergil069 said:
HI Guys,
I flashed the Lollipop 5.0.1 CHN firmware and rooted the phone to install the Google apps, then when the India Firmware came i tried to flash that via Odin, it failed. and bricked the phone, could get into download mode but all firmware i've tried fails.
i tried numerous thing to a point where i can now only get CWM- recovery or TWRP open recovery on the phone, and then it allows me to get back into download mode with swver A3, but Odin still fails almost immediately.
help would be much appreciated
regards
Brendan
Click to expand...
Click to collapse
So this means you can into Download Mode which is quite a good thing.
Now what you do is download the particular Kies for S4 from the OEM site and connect it when your phone is in Download or that wierd Yellow Triangle with the sign to connect to PC, and then kies will try to save ur phone.
came accross this http://forum.xda-developers.com/showthread.php?t=2269941
Odin completed success fully, but now phone just hangs just after it askes to select the OS language ps. i used the lollipop india rom with the pit in the mentioned post
install a custom recovery using odin like philztouch and do a full wipe to install new rom
will i need a new PIT file?, after full wipe just Odin and lollipop 5.0.1 as normal?

Stock ROM Backup

Hi,
I have rooted and installed TWRP on my 910F Note4 as I was fed up waiting on the lollipop update rolling out. I am currently on 4.4.4 and have made a full backup using TWRP of the stock rom.
My intention was flashing the Cyanogen ROM and using that, but i now see on sammobile there is a stock 5.01 rom available. I have a few questions about this.
1. If I flash to Cyanogen can I still revert back to the stock rom 4.4.4 I have made a backup with? I read somewhere there might be problems as I was on KitKat then moved to lollipop(Cyanogen).
2. Can I flash the stock lollipop rom from within TWRP? Or do you have to do this via ODIN?
3. If I flash the Lollipop stock ROM with Odin I assume I will lose root and TWRP? So this would have to done again?
Guess I am asking what is the best way to proceed?
Thanks again
Paul
pmlfrew said:
Hi,
I have rooted and installed TWRP on my 910F Note4 as I was fed up waiting on the lollipop update rolling out. I am currently on 4.4.4 and have made a full backup using TWRP of the stock rom.
My intention was flashing the Cyanogen ROM and using that, but i now see on sammobile there is a stock 5.01 rom available. I have a few questions about this.
1. If I flash to Cyanogen can I still revert back to the stock rom 4.4.4 I have made a backup with? I read somewhere there might be problems as I was on KitKat then moved to lollipop(Cyanogen).
2. Can I flash the stock lollipop rom from within TWRP? Or do you have to do this via ODIN?
3. If I flash the Lollipop stock ROM with Odin I assume I will lose root and TWRP? So this would have to done again?
Guess I am asking what is the best way to proceed?
Thanks again
Paul
Click to expand...
Click to collapse
hi Paul,
1. i beleve to flash CM from kitkat you will need to install the lollipop bootloader first.
2. You have to flash the stock rom via Odin, you will keep all apps settings and files but you will lose root (you u can re root in 3 minutes)
Best thing you could do is flash the stock rom first with odin, see how that feels (IMO its good been using it for months now) and then root it and back it up and flash CM12 (you dont have to flash any boatloader at this point)
grtz
Luc
Racinghart91 said:
hi Paul,
1. i beleve to flash CM from kitkat you will need to install the lollipop bootloader first.
2. You have to flash the stock rom via Odin, you will keep all apps settings and files but you will lose root (you u can re root in 3 minutes)
Best thing you could do is flash the stock rom first with odin, see how that feels (IMO its good been using it for months now) and then root it and back it up and flash CM12 (you dont have to flash any boatloader at this point)
grtz
Luc
Click to expand...
Click to collapse
Thanks will flash to lollipop today then....
pmlfrew said:
Thanks will flash to lollipop today then....
Click to expand...
Click to collapse
Ok tried to flash Stock O2 UK lollipop ROM via ODIN and got error message on screen. MD5 too big or something. Had to pull battery on phone. Had to then reflash TWRP. Got back into TWRP and tried to do a recovery of the backup I took but phone is stuck at Galaxy note 4 screen. It then shuts down and restarts and gets to the same screen again.
Do I try a different ROM? What can I do?
Thanks
Paul
pmlfrew said:
Ok tried to flash Stock O2 UK lollipop ROM via ODIN and got error message on screen. MD5 too big or something. Had to pull battery on phone. Had to then reflash TWRP. Got back into TWRP and tried to do a recovery of the backup I took but phone is stuck at Galaxy note 4 screen. It then shuts down and restarts and gets to the same screen again.
Do I try a different ROM? What can I do?
Thanks
Paul
Click to expand...
Click to collapse
I got it working by flashing the German non branded ROM... Got the error message again but then used a "All samsung recovery.tar" as stated on another post in here and it booted fine eventually... Now on Lollipop. Now time to flash with TWRP.... Again!!!
Please, i need help !
I need help, urgently !
My Note 4 SM-N910C does not work. I can enter the Recovery and the Download Mode. When attempting to install a Custom ROM gives me an error that says I have no data. In the internal memory I have 0mb.
I tried using odin, but I can not .. Salta error.
Someone who can make a backup of your phone (which is factory), leave me a link to download it? So I install the TWRP. Please.
They have another solution?
Thank you.:good:

com.sec.edpg error..what is it.

hi all,
i decided to unroot my device and flashed stock firmware through odin, now when the phone restarts i get this error and the touch is unresponsive i am not able to enter app drawer and the it takes repeated attempts to get into power off menu.
what has happened did i miss some imp step, was i suppose to uncock bootlaader under usb debugging etc etc. i tried flashin fw without BL file still same error.
this was an ebay purchase UK unocked model, which i believed was flashed with indian nougat firmware which i again reflashed to G935FXXU1DPLT, OTA updated to G935FXXU1DQB3 prior to rooting.
not able to boot into recovery also
currently iam flashing G935FXXU1DPLT or am i supposed to flash G935FXXU1DQB3

Categories

Resources