Database Users

[STICKY][ROM] nvflash FULL restore, using bekit's original image (Instructions)

MANY THANKS TO REV FOR RE-WRITING THIS FOR ME!
(Post was updated on 3/23/2011)
=======================================
This post is to provide a template for using NVFlash to restore/recover your G-Tablet after suffering some kind of malfunction. Specifically, this document tries to provide ALL the information you need to use the NVFlash tool to recover the bekit 1105 software version, which has been found to be safe as a starting point for rebuilding your tablet after having a problem. This post does not include other methods of setting up NVFlash (such as installing the SDK, etc.) because this method is proven and can be easily supported.
I use Ubuntu Linux and know that the Linux instructions below are correct. Others have written Windows instructions and those too have been checked carefully and have been used before successfully.
A WARNING IN ADVANCE: NVFlash makes changes to the partition structure of your device. You should tread carefully and understand the risks. (MOD EDIT Note: It also has been noted a bunch of times that even NVFlashing your G-Tablet will not completely overwrite everything on it.)
The NVFlash setup process begins with a visit to:
http://db.tt/Wm25t7U
(Note: Sometime this DropBox is cranky. If you have trouble with it, check back later.)
Linux users: You want to get "nvflash_linux_2010110500.tar.gz" and "nvflash_gtablet_2010110500.zip "
Windows users: You want to get "nvflash_windows_20100500.zip" and ""nvflash_gtablet_2010110500.zip"
Note: The above "nvflash_gtablet_2010110500" is commonly referred to as bekit version 1105 in many posts relating to nvflashing (especially my posts).
-------------------------------------------
Installation
First, create a folder named "NVFlash" on your PC to put the needed files into and to work from. (Note: You can call it something else if you want to; we're just using "NVFlash" to keep all of us on the same page.)
Next, extract the files you downloaded from the DropBox above into the "NVFlash" directory. The files with linux and windows in the middle of then are the files for setting up NVFlash. (The are taken from the SDK and do not install the whole SDK -- just a simple, operable NVFlash for us to use here.) The files with gTablet in the middle contains the .img files with the software to go on your G-Tablet.
Third, for Windows users, you'll need to have an APX-specific USB driver for the next steps. (The Windows package bekit supplied has an .inf file in it, but the actual drivers are not there). For Linux users, you don't need an extra driver.
One source for the Windows drivers is at
http://www.myadventvega.co.uk/
Find the "Downloads" tab in the middle of the page and click on "USB System Driver" to get the files. Extract them and go down two levels to the "USB" folder -- and move that into your "NVFlash" directory. The USB folder has the .inf file for installation in it along with two other directories with drivers for the various operating systems. (Note: These drivers, which are the same as the drivers in the SDK, are proven to work with Win 7 64-bit and have the setup include to load into other versions of Windows.) Follow this narrative for actual installation of the drivers.
CHECKPOINT: At this point, you should have the nvflash files, .img files, and USB directory (and files) in you "NVFlash" directory and are ready to begin the recovery process.
Now, you will need to boot into G-Tablet APX mode: hold down the power and volume - button simultaneousl until your G-Tab comes up and the goes back to a black screen. The black screen means it is in APX mode and it is waiting to display the flashing process. In Linux, type "lsusb" in a terminal and you should see this "0955:7820 NVidia Corp.". 7820 means the device is in APX mode.
Connect your G-Tablet to your PC using your miniUSB to USB cable that came with your tablet.
Linux users: At this point, open up a command window to the folder you created, and run this script:
./nvflash_gtablet.sh
This will wipe the device back to bekit's original TnT stock image, except for user data which is retained. Should take about a minute to run and the device will reboot itself automatically. If the script does not work, make sure that the shell script and nvflash binary are set as executables.
Windows users: When you connect to the PC, the PC immediately tries to load a driver -- but since it doesn't know where the USB driver files are it will fail. Click through Start/Control Panel/Device Manager and find "APX" listed in the devices with a yellow "!" (exclamation point) on the icon. Select the APX item and find the "Update Driver" button and click it. When it asks where to search, choose the local computer manual selection choice and tell it to Browse.
Point the Browse (and the USB install) at the "USB" directory under the "NVFlash" folder. When pointed at the "USB" directory, the driver installed and I was ready to nvflash. If you go back to Device Manager after the Windows install has completed, it will show the nVidia USB drivers near the top of the USB device list.
Again, for Windows: Run this script which is in the "NVFlash" folder:
nvflash_gtablet.bat
This will wipe the device back to bekit's original TnT stock image except for user data, which is retained. Should take about a minute to run and the device will reboot itself automatically all the way to the main screen.
POST NVFlash:
When your G-Tablet has booted back to the main screen, you will have to check and make sure everything is set up. Particularly, get the wifi on and connected to the Internet. Almost immediately, you should get a notice about an OTA (over the air) update. This is the OTA Update to software version 3588. If it does, go ahead and have it do the update. From there, you can begin using your "stock 3588" G-Tablet.
If you don't get an automatic OTA notification, you can go the to manual "Update" icon on your tablet and have it check for updates -- and hopefully it will find OTA 3588.
Or, if neither of the above happen, you can download 3588 at the following link and install it manually:
http://tapntap.http.internapcdn.net/tapntap/viewsonic/update-smb_a1002-3588-user.zip
Note: Following is a STICKY from General Forum on the stock recovery process:
http://forum.xda-developers.com/showthread.php?t=892090
NOTICE: There are many threads out there with tell how to do this process. Others tell individuals' problem solving experiences. A few of them may not be right! The above process is not the only way to do this -- but it is fairly straightforward and it is proven. It is recommended for anyone who does not have experience with nvflashing.
***************************************************
Further references (since I'm not a Windows user): http://forum.xda-developers.com/show...0&postcount=28
and http://forum.tegratab.com/viewtopic....bbde76184e550a and http://wiki.tegratab.com/index.php/Nvflash_FAQ
An additional suggestion if you also want to tack on bekit's clockworkmod recovery versus standard recovery: http://forum.xda-developers.com/show...3&postcount=17
Hope this helps!
03/2011 update -- I've been told that this tool has been useful to erase ALL partitions, including user data. I believe you need to re-flash with the bekit 1105 above, AFTER you use this: http://forum.xda-developers.com/showthread.php?t=974422
04/22/2011 update -- I've built out both 1.1-3588-based and 1.2-4349-based versions that have effectively replaced bekit's 1105 image ("nvflash_gtablet_2010110500.zip"), at least on my own device - I'm also addding a clockworkmod recovery option. It is being hosted in the same location as my 1.2-based mods - I will be making updates there, from this point on (as I might update them from time to time).
(you'd still need bekit's Windows or Linux tools, keep in mind) I've been able to bring back my device back from a soft-brick several times, so I feel they are usable.
05/09/2011 update -- A reminder that these images are not being updated, here. I have a newer nvflash post over in the same site where I have my 1.2-based mods. The 1105 bekit image mentioned here is still relevant for 1.1-based ROM users, or you can use my 3588 ot 4349 solution at the other site.
05/10/2011 update -- I have PM'd the moderator to either unsticky this post and / or assign it to someone else, as I do not plan on updating it, here. I believe that there is a 3588 image in the TegraTab IRC that someone created, for example.

Looks good Roebeet. I wrote a little how to a while back on tegratab. I know you are aware but for the benefit of others I wanted to add the following.
One little thing is sometimes when you are done you will get a boot loop. I think it only may happen once as I never saw it again. The fix is to go into Clockwork and partition the internal sd card again. The old settings said 512 for memory, and 256 swap. Bekit updated Clockwork and now you can format all the way to 4gb if you like, and swap should be 0 as it is not used.
Edit: New wisdom says not to partition the internal sdcard to anything but 2048. Folks have had issues with memory errors in the market with anything bigger. 0 for a swap is also the recommendation as Android apparently does not make use of the swap.

roebeet said:
Wanted to expand on what was already here, since there seems to be a lot of questions that pop up. I use Ubuntu so I know that the Linux instructions are correct.
A warning in advance: nvflash makes changes to the partition structure of your device. You should tread carefully and understand the risks.
Pre-req: http://db.tt/Wm25t7U
Linux users: You want to get "nvflash_linux_2010110500.tar.gz" and "nvflash_gtablet_2010110500.zip "
Windows users: You want to get "nvflash_windows_20100500.zip" and ""nvflash_gtablet_2010110500.zip"
Other references (since I'm not a Windows user): http://forum.xda-developers.com/showpost.php?p=9564270&postcount=28
and http://forum.tegratab.com/viewtopic.php?f=6&t=8&sid=4e6bd75cda9e24e04fbbde76184e550a
http://wiki.tegratab.com/index.php/Nvflash_FAQ
-------------------------------------------
Installation
Create a folder on your PC which you use as your restore base, and then extract the platform-specific ZIP into that location.
Then, download the "nvflash_gtablet_2010110500.zip" package and unzip the /nvflash_gtablet/ folder inside into the same folder as where you dropped nvflash.
For Windows users, you'll need to have an APX-specific USB driver for the next steps (I believe that the Windows package bekit supplied has that .inf file, but again I don't know for sure). For Linux users, you don't need an extra driver.
Once ready, boot the device into APX mode (power up and volume down, at the same time - you'll see the boot screen pop up, and then go blank.). In Linux, type "lsusb" in a terminal and you should see this "0955:7820 NVidia Corp.". 7820 means the device is in APX mode.
Linux users: At this point, open up a command window to the folder you created, and run this script:
nvflash_gtablet.sh
This will wipe the device back to bekit's original TnT stock image, except for user data which is retained. Should take about a minute to run and the device will reboot itself automatically.
Windows users: (again, I did not test this myself). Run this script, in the folder you created:
nvflash_gtablet.bat
Hope this helps!
Click to expand...
Click to collapse
I need help. I finally got Windows 7 to recognize the device in APX mode but how do I flash from this point. It only shows up in my Device list with all the subfolders in it.

What is this for? Restoring to factory Rom?
Thanks,
Scott

cscotty said:
What is this for? Restoring to factory Rom?
Thanks,
Scott
Click to expand...
Click to collapse
Yes, you can use it for exactly that. I believe bekit added Launcher Pro and superuser, but other than that it's a way to completely wipe the device. Moreso than a standard recovery would do.

The pre-req link doesnt work. Can you update the link?
Thanks
roebeet said:
Wanted to expand on what was already here, since there seems to be a lot of questions that pop up. I use Ubuntu so I know that the Linux instructions are correct.
A warning in advance: nvflash makes changes to the partition structure of your device. You should tread carefully and understand the risks.
Pre-req: http://db.tt/Wm25t7U
Linux users: You want to get "nvflash_linux_2010110500.tar.gz" and "nvflash_gtablet_2010110500.zip "
Windows users: You want to get "nvflash_windows_20100500.zip" and ""nvflash_gtablet_2010110500.zip"
Other references (since I'm not a Windows user): http://forum.xda-developers.com/showpost.php?p=9564270&postcount=28
and http://forum.tegratab.com/viewtopic.php?f=6&t=8&sid=4e6bd75cda9e24e04fbbde76184e550a
http://wiki.tegratab.com/index.php/Nvflash_FAQ
-------------------------------------------
Installation
Create a folder on your PC which you use as your restore base, and then extract the platform-specific ZIP into that location.
Then, download the "nvflash_gtablet_2010110500.zip" package and unzip the /nvflash_gtablet/ folder inside into the same folder as where you dropped nvflash.
For Windows users, you'll need to have an APX-specific USB driver for the next steps (I believe that the Windows package bekit supplied has that .inf file, but again I don't know for sure). For Linux users, you don't need an extra driver.
Once ready, boot the device into APX mode (power up and volume down, at the same time - you'll see the boot screen pop up, and then go blank.). In Linux, type "lsusb" in a terminal and you should see this "0955:7820 NVidia Corp.". 7820 means the device is in APX mode.
Linux users: At this point, open up a command window to the folder you created, and run this script:
nvflash_gtablet.sh
This will wipe the device back to bekit's original TnT stock image, except for user data which is retained. Should take about a minute to run and the device will reboot itself automatically.
Windows users: (again, I did not test this myself). Run this script, in the folder you created:
nvflash_gtablet.bat
Hope this helps!
Click to expand...
Click to collapse

stanglx said:
The pre-req link doesnt work. Can you update the link?
Thanks
Click to expand...
Click to collapse
It seems to go up and down (it's bekit's dropbox). Try this:
https://www.dropbox.com/s/wrcd87u1iy31u4e

roebeet said:
Wanted to expand on what was already here, since there seems to be a lot of questions that pop up. I use Ubuntu so I know that the Linux instructions are correct.
A warning in advance: nvflash makes changes to the partition structure of your device. You should tread carefully and understand the risks.
Pre-req: http://db.tt/Wm25t7U
Linux users: You want to get "nvflash_linux_2010110500.tar.gz" and "nvflash_gtablet_2010110500.zip "
Windows users: You want to get "nvflash_windows_20100500.zip" and ""nvflash_gtablet_2010110500.zip"
Other references (since I'm not a Windows user): http://forum.xda-developers.com/showpost.php?p=9564270&postcount=28
and http://forum.tegratab.com/viewtopic.php?f=6&t=8&sid=4e6bd75cda9e24e04fbbde76184e550a
http://wiki.tegratab.com/index.php/Nvflash_FAQ
-------------------------------------------
Installation
Create a folder on your PC which you use as your restore base, and then extract the platform-specific ZIP into that location.
Then, download the "nvflash_gtablet_2010110500.zip" package and unzip the /nvflash_gtablet/ folder inside into the same folder as where you dropped nvflash.
For Windows users, you'll need to have an APX-specific USB driver for the next steps (I believe that the Windows package bekit supplied has that .inf file, but again I don't know for sure). For Linux users, you don't need an extra driver.
Once ready, boot the device into APX mode (power up and volume down, at the same time - you'll see the boot screen pop up, and then go blank.). In Linux, type "lsusb" in a terminal and you should see this "0955:7820 NVidia Corp.". 7820 means the device is in APX mode.
Linux users: At this point, open up a command window to the folder you created, and run this script:
nvflash_gtablet.sh
This will wipe the device back to bekit's original TnT stock image, except for user data which is retained. Should take about a minute to run and the device will reboot itself automatically.
Windows users: (again, I did not test this myself). Run this script, in the folder you created:
nvflash_gtablet.bat
Hope this helps!
Click to expand...
Click to collapse
Roebeet sorry but I just noticed for noobs that the linux command needs to be
. nvflash_gtablet.sh
Also if you unzip those files into a premade directory such as "gtablet" when you unzip them each have their own directories and if you ls you can see that the bash script isn't executable from there. So you need to copy either the gtablet files into the platform folders or copy all the files inside both into your "gtablet" folder. Then you can run the ". nvflash_gtablet.sh" command and voila. Sorry I am on Ubuntu and don't know if it is different, but that is the way I run them.

No worries - all replies are welcome! the more info we have, the better.

This should be stickied. Nvflash has saved my gtab many times and I think its the reason why my gtab doesn't really encounter too many Force closes. Its the perfect method to ensure your gtab is clean.

I tried this tonight to try to get my gTablet back to stock so that I could show people how to install CWM on a video but I could get neither of my Windows 7 64-bit computers to recognize the APX .inf that was included in the pack.
I have a linux machine around here somewhere I may have to use...

ehunyadi said:
I tried this tonight to try to get my gTablet back to stock so that I could show people how to install CWM on a video but I could get neither of my Windows 7 64-bit computers to recognize the APX .inf that was included in the pack.
I have a linux machine around here somewhere I may have to use...
Click to expand...
Click to collapse
My limited experience with 64-bit Win7 -- the drivers have to be signed, or else they won't work. There's a way to disable that on boot, but you can't permanently disable it. I'm wondering if the APX USB driver is signed?

Open a command prompt as an admin and type
bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
This is the only way.. dont worry if the test watermark shows up.. it wont affect anything.
Also... They have a x64 driver - read this
http://tegradeveloper.nvidia.com/tegra/forum/adb-usb-driver

Hi there,
I exchanged for a new Gtab yesterday from sears (as it had some power issues).
Today, I tried TnT 2.2 on my rooted tab (Z4 for rooting). Also have ClockworkMod .8.
I partitioned my internal SDCard. But after vanilla restore, I could find my tab space reduced to 4 gigs. What should I do to restore to full 16 gigs(14+ gigs actually).
============================================================================================================================
2. I followed your instrction and partitioned again in clockworkMod and did 4 gigs and 0 in the second one. Now it shows 11 gigs for data and 4 gigs for system.
Now I inserted an external micro SD card (16 gigs) but my storage is not seeing it. What should i do? Ignore my first part please.

Your gonna have problems later if you don't repartition to 2048 and 0

satishraman said:
Hi there,
I exchanged for a new Gtab yesterday from sears (as it had some power issues).
Today, I tried TnT 2.2 on my rooted tab (Z4 for rooting). Also have ClockworkMod .8.
I partitioned my internal SDCard. But after vanilla restore, I could find my tab space reduced to 4 gigs. What should I do to restore to full 16 gigs(14+ gigs actually).
============================================================================================================================
2. I followed your instrction and partitioned again in clockworkMod and did 4 gigs and 0 in the second one. Now it shows 11 gigs for data and 4 gigs for system.
Now I inserted an external micro SD card (16 gigs) but my storage is not seeing it. What should i do? Ignore my first part please.
Click to expand...
Click to collapse
You only have 16gb to start. Partitioning you internal to 4gb uses part of that. I would go back and only use 2gb, and 0 for swap. There are things, like the new market that break with anything but 2gb.
If you mean the settings menu is not showing your external sd card that's normal. Look in a file explorer program in the / directory. Look for SDcard2. That is your external. Same deal, look for usbdisk if you plug in a usb drive.

Roebeet
also this could be helpful to Ubuntu/linux users.
in the same directory where your flash script is there is a file that is called "gtablet.cfg" if you download the clockwork.img recovery and put it in this directory you can open up the "gtablet.cfg" with a text editor
scroll down to where you see "filename=part9.img" and replace "part9" with "clockwork" and it should now read "filename=clockwork.img" this will flash clockwork and save you a step. To change it back so you flash complete stock just edit the file again and reverse it.

romanrish said:
Roebeet
also this could be helpful to Ubuntu/linux users.
in the same directory where your flash script is there is a file that is called "gtablet.cfg" if you download the clockwork.img recovery and put it in this directory you can open up the "gtablet.cfg" with a text editor
scroll down to where you see "filename=part9.img" and replace "part9" with "clockwork" and it should now read "filename=clockwork.img" this will flash clockwork and save you a step. To change it back so you flash complete stock just edit the file again and reverse it.
Click to expand...
Click to collapse
You don't even have to do that - you can just rename part9.img to something else, and clockworkmod.img to "part9.img". That's actually what I do.

roebeet said:
You don't even have to do that - you can just rename part9.img to something else, and clockworkmod.img to "part9.img". That's actually what I do.
Click to expand...
Click to collapse
Yeah I thought about that, but figured some people might get confused and forget which one was which. Either way works as well just as long as you keep both files. You should edit your original post and add that in as an option to do at the end. It will keep some from having to look through and creating a new post cause they can't find it, and keep our forums clean.

This should definitely be stickied. Mods please?
P.S. I cannot believe how awesome this forum is(Viewsonic G Tablet). I have gone to other forums and the other devs and users are not as friendly and awesome as the ones we have here. Almost brings a tear to my eye. Great job Roebeet, this should help us noobs out a lot. LOL!

[GUIDE][Update][Android CM Alpha 3] How to Install CM Alpha on Touchpad

NOTE: I don't have a TP anymore, but i am pretty sure the installation instructions will be the same moving forward. If you are new follow the full guide, if you are already on one of the CM versions, skip to step 7 and replace the file with the current file.
Note: If you are already on CM Alpha 1/2.1 skip to step 7, if not you can follow the instructions below to install CM Alpha 3 from WebOS.
Alright, here is a step by step instruction on how to install CM Alpha 3 on Touchpad. I did notice there is a video guide but a text step by step might be useful for some. I have this installed and for Alpha release this is fantastic.
Pretty straightforward installation, but as always you follow this guide and flash at your own risk. Main thread for the CM port is here. Read whats working and whats not working there. If you have any questions, post it there. but read the known issues first, don't post know issues. This is just a guide.
Required:
1) PC ( windows, mac or linux) with working Internet
2) HP Touchpad ( obviously) and the usb cable that came with it.
3) Good Reading skills ( I am serious).
4) Read this guide twice if you have to.
Step 0:
Get your pre flash jitters out and think twice. This will root your device and hence your warranty will be void after the flash. If you still want to flash, back up your current HP touchpad. figure out which way is your volume up button ( you will need for step 4) and proceed to step 1
Step 1:
Make sure you have atleast 2GB of free space in your touchpad. Download the following files from here
1)Moboot bootloader for multi boot
2)CM Alpha 3
3)Clockwork Mod Recovery
Once done, go to step 2 below;
Step 2:
1)Acme Installer from here
2) HP WebOS SDK for windows, mac or linux
3) Follow the links above to install the full SDK or just the Novacom driver which is all that is required. If you are not sure, install the full sdk.
on to step 3 now.
Step 3:
1) Connect Touchpad to PC with the usb cable that came with it and select Usb Drive option.
2) Once the Touchpad pops up on your screen, create a folder called cminstall and put the files you downloaded in Step 1 there.
3) Eject/Safely remove touchpad from the pc, remove the USB cable from pc and shutdown touchpad, then go to step 4.
Step 4:
1) Do you know which way is your volume up button? if you are not sure then you are not paying attention to this guide. To figure out which way, boot to webOS, figure it out and shutdown.
2)Hold the volume up button and press power button simultaneously. You should see a white USB symbol.
3)Connect the USB cable back to pc and if the Novacom drivers were properly installed, the driver will be automatically detected and installed.
Step 5:
Almost there, time to install now.
Extract the Acme Installer you downloaded in Step 2 to your desktop or wherever you want. Open up cmd ( in windows) or terminal ( in linux or mac). cd to the directory where you just extracted your Acme Installer.zip and go to step 6 for install.
Step 6:
Now type this in the command prompt after you have done cd
novacom boot mem:// < ACMEInstaller
NOTE: windows users might have to manually move the novacom.exe and/or AcmeInstaller into c:\programfiles\palm folder and run the above command from there.
and wait for it to install and boot into CyanogenMod. If your clockwork mod didn't get installed, go here for a fix.
Step 7:
Update from CM Alpha 1/ 2.1
1) Download CM Alpha 3 from here
2) Plug in your touchpad to PC, select copy usb files option
3) Transfer CM Alpha 3 zip file into the "sd card" of your touchpad when it pops up and disconnect.
4) Long press power button and select reboot, then recovery option.
5) Recommended but Optional ( I didn't): In CWM recovery, go to backup and storage, do a nandroid backup before updating, back to main cwm recovery, wipe cache and in advanced wipe dalvik cache.
6) In the CWM recovery meny, use your volume buttons and select install zip file from sd card, select zip file and select cm alpha 3 zip, then scroll down and say yes.
7) Reboot. To check if you are on alpha 3, go to settings, about tablet and mod version should be alpha3.
To install google market and google apps, go here
Have Fun. Thanks to the awesome CM team, we have android on touchpad.
NOTE: If you want to uninstall CM for whatever reason, download ACME uninstaller from here and run it like you did with ACME installer. This should work ( i haven't tried it though).
SOD( Sleep of Death): This is when touchpad goes to sleep and wouldn't wake up, don't panic. Doesn't happen often and I have never seen it since installing Alpha 2.1. Press and hold power and home button for 10 - 20 secs and your TP will reboot. One fix for this is to use no-frills cpu control or set cpu and set min cpu to 384Mhz.

sticky this!

Good effort but you're going to get warned/banned by the mods for cross linking. They have to protect their domain you know.

techspecs said:
Good effort but you're going to get warned/banned by the mods for cross linking. They have to protect their domain you know.
Click to expand...
Click to collapse
Cross linking? I linked directly to the other websites which host the files. Thats not allowed? If so, mods can delete this thread. Only trying to help. I don't see another thread for a guide here in this section unless i am blind .

I've followed all the steps exactly and I'm getting this:
The ACME files were extracted to my users folder.

RavenSEAL said:
I've followed all the steps exactly and I'm getting this:
The ACME files were extracted to my users folder.
Click to expand...
Click to collapse
Looks like novacom wasn't installed properly. I don't have windows, so hopefully somebody else can chime in. try reinstalling novacom or the entire sdk.
Sent from my HP Touchpad using xda premium

reinstall and a quick reboot on my PC did the trick , running CM7 now

RavenSEAL said:
reinstall and a quick reboot on my PC did the trick , running CM7 now
Click to expand...
Click to collapse
Glad you got it sorted out. Enjoy cm
Sent from my HP Touchpad using xda premium

Android is unable to establish a reliable data connection to verify your google account :|

I am getting the same error:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Damian>cd c:\Users\Damian\desktop
c:\Users\Damian\Desktop>novacom boot mem:// < ACMEInstaller
'novacom' is not recognized as an internal or external command,
operable program or batch file.
c:\Users\Damian\Desktop> novacom boot mem:// < ACMEInstaller
'novacom' is not recognized as an internal or external command,
operable program or batch file.
c:\Users\Damian\Desktop>Acmeinstaller
'Acmeinstaller' is not recognized as an internal or external command,
operable program or batch file.
c:\Users\Damian\Desktop>novacom boot mem:// < ACMEInstaller
'novacom' is not recognized as an internal or external command,
operable program or batch file.
c:\Users\Damian\Desktop>novacom boot mem:// < ACMEInstaller
'novacom' is not recognized as an internal or external command,
operable program or batch file.
c:\Users\Damian\Desktop>
I reinstalled Novacom and in device manager it's there and installed correctly.

Breakthecycle2 said:
I am getting the same error:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Damian>cd c:\Users\Damian\desktop
c:\Users\Damian\Desktop>novacom boot mem:// < ACMEInstaller
'novacom' is not recognized as an internal or external command,
operable program or batch file.
c:\Users\Damian\Desktop> novacom boot mem:// < ACMEInstaller
'novacom' is not recognized as an internal or external command,
operable program or batch file.
c:\Users\Damian\Desktop>Acmeinstaller
'Acmeinstaller' is not recognized as an internal or external command,
operable program or batch file.
c:\Users\Damian\Desktop>novacom boot mem:// < ACMEInstaller
'novacom' is not recognized as an internal or external command,
operable program or batch file.
c:\Users\Damian\Desktop>novacom boot mem:// < ACMEInstaller
'novacom' is not recognized as an internal or external command,
operable program or batch file.
c:\Users\Damian\Desktop>
I reinstalled Novacom and in device manager it's there and installed correctly.
Click to expand...
Click to collapse
Sorry, are you saying when you reinstalled novacom everything worked? if not try moving ACME installer to the novacom directory and try from there.

Any idea where they would be? I can't find them.
---------- Post added at 04:48 PM ---------- Previous post was at 04:39 PM ----------
That didnt work either.

Breakthecycle2 said:
Any idea where they would be? I can't find them.
---------- Post added at 04:48 PM ---------- Previous post was at 04:39 PM ----------
That didnt work either.
Click to expand...
Click to collapse
try running cmd prompt as an admin. I don't have a windows machine, so i am not sure whats happening with yours. you have xp or windows 7 or vista?

Breakthecycle2 said:
Any idea where they would be? I can't find them.
---------- Post added at 04:48 PM ---------- Previous post was at 04:39 PM ----------
That didnt work either.
Click to expand...
Click to collapse
I had problems running it from desktop as well. got the same message you did. tried running it as admin and from c:\ to no avail. put acme in C:\Program Files\Palm, Inc\ directory and it worked finally

I got it! Thanks!

Breakthecycle2 said:
I got it! Thanks!
Click to expand...
Click to collapse
it worked for you by putting it in the palm folder like the poster above yours said? if not please post your soln for other windows users benefit. thanks

im having problems within cmd, i get access denied anytime i run the novacom command, i also ran under an admin account and as administrator n have the same problem, i tried under safe mode and it couldnt connect to server so what do i do?

I am using a laptop using ubuntu 11.04 lts. I follow all of the steps 100% and yet when i do the novacom prompt in terminal it boots my touchpad yet never goes to the penguin screens or installs anything. It just stays on the HP logo untill i do the manual reboot by holding home and power. Any ideas?

rizdog23 said:
I am using a laptop using ubuntu 11.04 lts. I follow all of the steps 100% and yet when i do the novacom prompt in terminal it boots my touchpad yet never goes to the penguin screens or installs anything. It just stays on the HP logo untill i do the manual reboot by holding home and power. Any ideas?
Click to expand...
Click to collapse
did you install the sdk and the novacom driver like the linux link suggested? i have ubuntu 11.04 and the steps i described worked no problems. reinstall novacom drivers

i installed the driver but not the full sdk cuz i was told i did not need to. Can you maybe give me a break down of how things will look like on ubuntu strictly? Sorry if i seem like a noob or it is bothersome for you to have to reply. I greatly appreciate your help

*UPDATED**UNLOCK TOOL (4-2019) for ALL Versions of BLU R1-HD

BLU R1-HD bootloader unlock script tool, and TWRP install tool.
Download is a zip file, unpack it to somewhere you will remember. Run the dirty-cow-tool.bat // mtk-su-tool.bat
The included files and folders are set to hidden, in effort to keep them safe from accidental delete.
Must have adb+fastboot + drivers installed and setup prior to using tool
Easiest method to install adb + fastboot on windows is with "15 second adb + fastboot install TOOL"
LINK==>ADB+FASTBOOT
It is for windows
In linux :
"sudo apt-get install android-tools-adb"
"sudo apt-get install android-tools-fastboot" Some fastboot commands were missing when i used this one ie "fastboot flashing get_unlock_ability"
"sudo apt-get install fastboot" worked better when I tried. ( i used that command as a check before doing the unlock, so it was needed only for that check)
Using Tool
On Windows?
Unzip the downloaded file to a new folder, open new
folder and click on "dirty-cow-tool.bat". // "mtk-su-tool.bat"
Do the steps in order (1-2-3-4) to be unlocked, then
Step (5) to get to second page where step (1) is root
The rest is optional
On Linux?
Unzip downloaded file to new folder folder .
Open folder. Then open R1-Linux-tool-v2 folder
Open terminal from that folder and type
" . R1-HD-TOOL.sh "
Same order of steps (1,2,3,4) step (5) for extra
Steps (1 on second menu) for superSU root.
Second menu steps (2,3,4,5,6,7,8) are optional.
**Linux Note**
The tool uses "fastboot flashing get_unlock_ability" as one of the methods to check before doing the unlock.
The version of fastboot that installed with "apt-get install android-tools-fastboot" did not recognize
this command. But "apt-get install fastboot" updated some version and then the command was recognized.
******OTHER NOTES****
--- this has been mentioned in the general thread and the modified v17 thread, but It has come up again so I wanted to make note of it.----
--- The newest blu versions (V7.4.2 and V17) Have made changes to "toolbox" and this effects things like "adaway" and "titanium backup"
--- The suggested fix is to install busy-box. I have had success with the version from play store, some prefer to use f-droid version. Either one will do. Install it and open the app. From in the app you need to do an install.
CHANGE LOG
V1:. Initial release : removed
V2:. : fixed typos preventing proper function
V3:.: switch file verification to md5 check instead of "ls-l" comparison.
V4: current version: add extras page, add SU flash, de-bloat script, Added Fm Radio, Added pre-loader roll back
V5: Fixed wrong loop "goto" line that made preloader rollback do "MTK_BLU Debloat v2" instead
V6: Added manual pause to script for mods that need recovery (Extra's 5) . Added redundent recovery flash command .
Few reports of recovery "not Sticking" and needed to run the flash commands manually one by one. Maybe the redundent
flash will make it survive. If still having problem with recovery "staying install" try manually flashing
here is link to the steps needed. FLASH RECOVERY
V7 Improved logs Added line to make batch run as sub-process so if error occurs , will not close
V7.1 : Updated the fm radio install zip and include the needed selinux mode changer app
V8: fixed dependency of needing to be unzipped to location w/o spaces in name. (when used from location with spaces, tool used to fail to push needed files).
.. added more time to allow dirtycow to "spawn" its root shell. Recent testing has shown sometimes it takes longer than the 60 seconds allowed in the script. Now it is looped 3 times.
V9 Added full path to abd push lines for recovery flash files. included fastboot.exe file to address some version issue where user s version would not output text file I coded into script for a verification ( included file is called by script, no need to do anything different with it)
V10: Moved zip file to included folder to help preserve locations when unpacked, added device check before running tool; So tool not used on wrong device, Rearranged order of operations on extra's page. (recovery installed options) Push files while in android before rebooting to recovery( should improve reliability for multiple reports of not automatically installing options for some)
******I have received some reports that some devices are reporting "ro.build.product =R1_HD and not "BLU_R1_HD" like mine, so the added device check is blocking tool from starting If this happens to you , you can make edit to the .bat file like below.
Change this line
Code:
:next_check
find "BLU_R1_HD" "%~dp0workingproduct.txt"
To this
Code:
:next_check
find "R1_HD" "%~dp0workingproduct.txt"
it is line #23
V11: Updated device model verification lines
MTK-SU: Replaced all dirty-cow part with New MTK-SU binary(elf) from @diplomatic
source
Click to expand...
Click to collapse
Credits to @Diplomatic for his work on the Mtk_su that I used used to make this tool work again after Dirty-Cow was patched.
DOWNLOAD LINK
Preferred to use the Downloads tab of this thread.
Archived downloads on android file host also == link
XDA:DevDB Information
R1-HD Dirty-cow Unlock Tool, Tool/Utility for the BLU R1 HD
Contributors
mrmazak, vampirefo for his recovery, lopestom for his recovery, emc2cube for his debloat zips, christianrodher for his dirtycow method,
Source Code: https://github.com/mrmazakblu/DirtyCow-R1_HD
Version Information
Status: Testing
Current Stable Version: V11
Stable Release Date: 2017-04-11
Current Beta Version: MTK-SU
Beta Release Date: 2019-04-14
Created 2017-02-22
Last Updated 2019-04-18

Reserved
Items planed to be addressed in next release:
--Add few more file integrity checks to the extra's page
--Add copy log to clipboard option so it is easier to post log entry if needed-------*********----already-_added to github copy of batch file
--Add a verification step that checks what recovery is installed( to prevent trying to do steps on extra's page with stock recovery)
--Possibly move to a "fastboot boot recovery" instead of "adb reboot recovery" for the same reason as above
--Add wget or similar to the extra's items so initial "TOOL" size is smaller (not that 40-50MB is big, but to some it may be )
--Add additional "selinux mode changer apk" for fm radio install rather than just the note that says it needs to be found.

Reserved

Works great on OEM 6.6, thanks for the tool!

So I got the one-click-root.sh done, maybe. Can some linux users go over it, make sure I didn't do anything stupid? I don't exactly have a device to check it with atm, and I am not pro with scripting, barely novice, so it is a pretty basic conversion of the batch file. Still, it might work . Just would like a few eyes on first.
https://github.com/theredbaron1834/Scripts/blob/master/one-click-root.sh
Also, I looked at dirty-cow-tool.bat. However, wow, more an advanced batch file, and I am not sure what the first half does, so not sure how to convert . However, it seems if anyone does get it, the eqiv of goto for linux is funtions. simple cheatsheet:
Code:
function stuff {
echo "this stuff is run via the function"
{
stuff #goes to stuff and runs function

theredbaron1834 said:
So I got the one-click-root.sh done, maybe. Can some linux users go over it, make sure I didn't do anything stupid? I don't exactly have a device to check it with atm, and I am not pro with scripting, barely novice, so it is a pretty basic conversion of the batch file. Still, it might work . Just would like a few eyes on first.
https://github.com/theredbaron1834/Scripts/blob/master/one-click-root.sh
Also, I looked at dirty-cow-tool.bat. However, wow, more an advanced batch file, and I am not sure what the first half does, so not sure how to convert . However, it seems if anyone does get it, the eqiv of goto for linux is funtions. simple cheatsheet:
Code:
function stuff {
echo "this stuff is run via the function"
{
stuff #goes to stuff and runs function
Click to expand...
Click to collapse
thank you for your input.
As far as the begining of the batch, It is adding a few folders to the "path" variable so help ensure the "adb push" commands find the files it is trying to push. Then it sets some folder "flags" to hidden so that the files the batch needs don't get accidentally moved or changed. Then the large section with mostly "echo" that is to set up the "simulated" G.U.I.
The lines of just "::::::::::" are simply used to help with reading the batch file. i use them to seperate functions. They are not needed.
The lines with only 2 "::" are standard windows comment / remark line entries
The lines with 1 ":" are the beginning line of the loop/ function == the line that "goto *" searches for

Does Works to unlock 7.4.2?

khyr said:
Does Works to unlock 7.4.2?
Click to expand...
Click to collapse
It is supposed to. It is the same base codes used from original script, and that one was confirmed to work. I Do not have first hand use of V7.4.2 so it is only confirmed through other users.
The dirty-cow being used has been patched by google in Dec but blu has not rolled out the patch. So there is no reason for it not to work.

edit:
I have the linux version ready.
-the first step, (ADB Push) is ready. including md5 file checks
-step 2 is ready= running dirty-cow with md5 check before final writing to mmcblk device
-step 3 is ready unlocking bootloader = including check if unlock is done, but need to fix the "unlock_adility" check
I can make to file to compare and grep the line needed, but cannot "sed" the extra information or do a > < comparison
-step 4 is ready .--flash twrp
Finished 90% of tool.
still need to tweek the log feature.
I ran tests on the lop back to menu and test ran
1. push files for dirty-cow and md5 check . then made push fail to verify the check method was valid ==pass
2. run dirty cow commands and md5 verification on resulting file. ==pass
3.unlock bootloader --- I ran it (needed to fake the already unlocked check) it works == pass
4 . flash twrp --installed both version i have, both install fine ===pass
5 extra menus -- ran . install su-----debloat---rebloat--- add fm radio--- preloader roll back =====all pass
(bootloader roll back needs manual intervention to re-enter fastboot during the boot loop that is unavoidable)
6. instruction ====not written yet
7. exit yes it closes == pass
8. logs --- needs completeing

I just loaded this on my OTA updated 7.4.2 device. I would note that the batch file does not actually create the /sdcard/Download folder so you might need to go into the terminal and actually create this on your sdcard... also worth noting that this batch file **requires** an sd card in the device to do any of the loads in the "5" menu.

torchredfrc said:
I just loaded this on my OTA updated 7.4.2 device. I would note that the batch file does not actually create the /sdcard/Download folder so you might need to go into the terminal and actually create this on your sdcard... also worth noting that this batch file **requires** an sd card in the device to do any of the loads in the "5" menu.
Click to expand...
Click to collapse
no it does not.
the /sdcard is the internal memory and the Download folder is already there.
you might be having issues but the folder is already part of normal system

mrmazak said:
no it does not.
the /sdcard is the internal memory and the Download folder is already there.
you might be having issues but the folder is already part of normal system
Click to expand...
Click to collapse
Fair enough, my restore didn't have /sdcard/Download and I made an assumption that /sdcard was my mounted card. Thanks for the insight.

OOPS
found typo on V4 of tool. batch files sets variables for "return", from loop functions. And two returns were set to same label9, so if you had tried to do extra's menu option #8. "ROLL Back Preloader" , instead it was running option # 5. " MTK_BLU Debloat v2"
fixed and still reading and re-reading to search for errors.
This looks bad.
The reason I put together this tool was I felt it was important to make a way to minimize the problems usually associated with android modifications. By making "typo's" a thing of the past, and I found them in my own script.
re-posted V5 combined with linux V2--

torchredfrc said:
I just loaded this on my OTA updated 7.4.2 device. I would note that the batch file does not actually create the /sdcard/Download folder so you might need to go into the terminal and actually create this on your sdcard... also worth noting that this batch file **requires** an sd card in the device to do any of the loads in the "5" menu.
Click to expand...
Click to collapse
I'm a total noob, and I'd like to know how to proceed with the supersu and all the other parts of step 5. Thank you

gabriel986 said:
I'm a total noob, and I'd like to know how to proceed with the supersu and all the other parts of step 5. Thank you
Click to expand...
Click to collapse
Ok. After you have completed upto twrp install. You can do the options on #5. It is all programed and automatic. What is does is put zip files onto the phone and reboots phone into recovery, then recovery installs them.

mrmazak said:
Ok. After you have completed upto twrp install. You can do the options on #5. It is all programed and automatic. What is does is put zip files onto the phone and reboots phone into recovery, then recovery installs them.
Click to expand...
Click to collapse
I get up to the recovery installation, but then I can not access such recovery on the phone, If I turn it on with power+vol up, it takes me to the default factory recovery by blu.
And If I try to the super su step with the phone on, it resets it, and get it to the screen with the dead android, while the script just shows the ADB DETECTED message.
In case it's needed, my R1 HD is running on
BLU_R0010UU_V7.4.2_GENERIC 09-11-2016 13:38

gabriel986 said:
I get up to the recovery installation, but then I can not access such recovery on the phone, If I turn it on with power+vol up, it takes me to the default factory recovery by blu.
And If I try to the super su step with the phone on, it resets it, and get it to the screen with the dead android, while the script just shows the ADB DETECTED message.
Click to expand...
Click to collapse
You missed a step in the process.
As tool finishes the recovery install it comes to a "pause" in the script, you need to hold the volume up button on phone "before" pressing button on pc keyboard to continue.
If phone does a normal reboot at this point then the system will replace the newly installed recovery with the stock one.
Giving you the situation you have now.
This step I cannot control, you must press volume button on phone to get the boot menu, and directly boot into recovery to ensure that the install sticks.

mrmazak said:
You missed a step in the process.
As tool finishes the recovery install it comes to a "pause" in the script, you need to hold the volume up button on phone "before" pressing button on pc keyboard to continue.
If phone does a normal reboot at this point then the system will replace the newly installed recovery with the stock one.
Giving you the situation you have now.
This step I cannot control, you must press volume button on phone to get the boot menu, and directly boot into recovery to ensure that the install sticks.
Click to expand...
Click to collapse
trying again....
for how long should I press the volume up key?

gabriel986 said:
trying again....
for how long should I press the volume up key?
Click to expand...
Click to collapse
When tool says Hold button , keep it held. Then continue the script. Phone should reboot to the boot menu. Then let go of volume
Some phones do not accept the fastboot reboot command, on those phones need to hold power to shut off. Then volume and power together to come on, release power when screen come on

mrmazak said:
When tool says Hold button , keep it held. Then continue the script. Phone should reboot to the boot menu. Then let go of volume
Some phones do not accept the fastboot reboot command, on those phones need to hold power to shut off. Then volume and power together to come on, release power when screen come on
Click to expand...
Click to collapse
ok.. trying again
---------- Post added at 02:00 PM ---------- Previous post was at 01:46 PM ----------
gabriel986 said:
trying again....
for how long should I press the volume up key?
Click to expand...
Click to collapse
it beat me!
I get stuck in that part of the process, If anyone uploads a video to check what i'm doing wrong, I'll be grateful.

[SCRIPT] PhoenixOS Installer for Debian based Linux

Hello I've Created installer script for PhoenixOS with help of grub installer script taken from remixos deb package file.
I am not responsible for anything that may happen to your PC/Laptop/Tab as a result of installing and using this script. you do so at your own risk and take the responsibility upon yourself.
Click to expand...
Click to collapse
Note: Backup your custom.cfg file if you are dual booting with other os if not then proceed further.
custom.cfg should be in /boot/grub/custom.cfg if EFI install then /boot/efi/EFI/yourdistroname/custom.cfg
p7zip-full should be installed its need for extracting ISO file.
Script should be placed where desired files or ISO is present.
--> This is tested and working fine in kde neon lts on MBR and GPT disks & EFI is not tested as I don't have that installation so it should work.
--> Other then Debian based distros IDK if my script works on them or not, so please test it yourself and inform.
--> If your home folder is defined on other disk or partition please add insmod part_gpt insmod ext2 OR insmod part_msdos insmod ext2 according to disk partition table to grub entry in custom.cfg
Click to expand...
Click to collapse
Features
Path defined root and home only.
Method defined FILES and ISO & EXE only.
Has Uninstall options.
Data folder is created in os folder
Click to expand...
Click to collapse
Make script executable
Code:
chmod +x PhoenixOS-Installer-Linux
Then Run
Code:
./PhoenixOS-Installer-Linux

reserved

reserved post

Not enough information. Please elaborate on the installation procedure itself. On Ubuntu of course it should install to sda2. I chose the path /dev/sda2/ then used .iso for the install method, and then upon trying to do the install using option 2 it simply keeps bringing me back to the menu where choices 1-4 are present.
I actually got PhoenixOS to install using the USB method, however I cannot find a working boot sequence for GRUB bootloader. I'm kind of at a loss for finding a way to easily switch between Ubuntu and PhoenixOS.

Deucalion29710 said:
Not enough information. Please elaborate on the installation procedure itself. On Ubuntu of course it should install sda2. I chose the path /dev/sda2/ then used .iso for the install method, and then upon trying to do the install using option 2 it simply keeps bringing me back to the menu where choices 1-4 are present.
I actually got PhoenixOS to install using the USB method, however, I cannot find a working boot sequence for GRUB bootloader. I'm kind of at a loss for finding a way to easily switch between Ubuntu and PhoenixOS.[/QUOTES]
I got this done by making different partitions. Sounds like a no-brainer, but it works. My main OS is MacOSX, then I made different partitions of FAT32s using Disk Utility, I created them all in different sizes (to prevent confusion). After that, I just install the other OS one by one (Phoenix will always be the last). And, I made some extra partitions during Linux installation (just in case) and deleted them after.
As for the Phoenix post, Thank you
Click to expand...
Click to collapse

It does not work...
I have placed the script and the iso file in the same home directory, chdir in that place but the script does nothing ... It asks for sudo and the it does not create any directorys.
To complicated to debug for me....
EDIT:
I have managed to install it in home / iso mode
I had to edit the generated schipt for modifying GRUB. It was copiing the whole script and not stopping at EOF ?!

It works great
Setup;
1 - Download Phonix OS ISO image on Phonix OS web site
2 - Create a folder with any name
3 - Copy the Iso file to this folder and extract the PhoenixOS-Installer-Linux.zip file to this folder
4 - Open the terminal and go to the folder you created
5 - Now run "chmod +x PhoenixOS-Installer-Linux" and "./PhoenixOS-Installer-Linux" command
6 - The script will run
7 - Select "Select Path & Method"
8 - Type "home" for path and press enter
9 - Type "iso" for method and press enter
10 - Select "Install Rom" and follow the steps
11 - Run the "sudo update-grub" command using the terminal when the process is finished
12 - Restart the computer and select Phoenix Os
I'm sorry for my bad english

bycoder said:
Setup;
1 - Download Phonix OS ISO image on Phonix OS web site
2 - Create a folder with any name
3 - Copy the Iso file to this folder and extract the PhoenixOS-Installer-Linux.zip file to this folder
4 - Open the terminal and go to the folder you created
5 - Now run "chmod +x PhoenixOS-Installer-Linux" and "./PhoenixOS-Installer-Linux" command
6 - The script will run
7 - Select "Select Path & Method"
8 - Type "home" for path and press enter
9 - Type "iso" for method and press enter
10 - Select "Install Rom" and follow the steps
11 - Run the "sudo update-grub" command using the terminal when the process is finished
12 - Restart the computer and select Phoenix Os
I'm sorry for my bad english
Click to expand...
Click to collapse
it works but when i try to boot it stucks at command shell. any idea ?

trying to bring my brothers A500 to life in 2019

Hey together,
I really hope someone out there is still using a A500 Tablet and may be able to help me fix a weird issue i encounter on every ROM i tried so far.
I installed the ROMs mentioned in this Thread: https://forum.xda-developers.com/iconia-a500/general/2018-a500-upgrade-threaddownloads-to-t3832293
And all of them come with the Same Problem for me.
If i try to open the Google PlayStore or something else that wants me to login into a Google Account it just says: "There was a problem communicating with Google Servers" "Try again later"
anyone knows of this issue ? All the fixes several Google searches gave me did not help to fix that issue for me on any of the ROMs.
help would be highly appreciated
kind regards
Finn

Hi,
have you read the tips? It says:
"- Google play will not work right if you do not format your data partition to f2fs. (You can do this in recovery)"
Have you tried it?

Matra-PB said:
Hi,
have you read the tips? It says:
"- Google play will not work right if you do not format your data partition to f2fs. (You can do this in recovery)"
Have you tried it?
Click to expand...
Click to collapse
That may not be the problem I've hear a lot of people are having this problem. But it's a good place to start if he hasn't tried it yet.

Success story upgrading A500 in 2019 July
finneus_ said:
Hey together,
I really hope someone out there is still using a A500 Tablet and may be able to help me fix a weird issue i encounter on every ROM i tried so far.
I installed the ROMs mentioned in this Thread: https://forum.xda-developers.com/iconia-a500/general/2018-a500-upgrade-threaddownloads-to-t3832293
And all of them come with the Same Problem for me.
If i try to open the Google PlayStore or something else that wants me to login into a Google Account it just says: "There was a problem communicating with Google Servers" "Try again later"
anyone knows of this issue ? All the fixes several Google searches gave me did not help to fix that issue for me on any of the ROMs.
help would be highly appreciated
kind regards
Finn
Click to expand...
Click to collapse
First my thanks to the forum key members for providing answers to queries and to all the key contributors of SW/ROMS in this forum. I followed the procedures from this forum to Flash / upgrade my Acer Iconia A500 on 4.0.3 ICS that was sitting in a trunk for the last few years. Summary of steps I tried out.
STEP 1: Install the Acer device drivers listed in the links in this forum on your Laptop/Computer even if by default your Windows 10 OS (assuming you are on Win10 like me) is able to recognize the A500 connected to the USB port.
USB_Acer_1.00.0524_A30HA31HA32H_A.ZIP
STEP 2: ROOTING the Acer A500.
1. The tablet should be already upgraded to stock ICS for A50x (or stock ICS A10x/A510 for other tablets).
2. On a tablet: "Settings" -> "Applications" -> "Development" -> "USB debugging" switch ON. If you do not see this menu, then click 7 times of the Android Build No. listed under settings and come back to the menu above to enable USB Debugging.
3. Connect the tablet to the computer (Before connection it is recommended to update the driver for a tablet from here: A10x, A50x, A510).
4. Since most of the discussions regarding flashing A500 were from 2011, the earlier Gingerbreak method for rooting did not work.
I downloaded the following file from this forum to root my tablet.
ICS_rooting_A10x_A5xx.zip
5. Open the directory with the unpacked archive. Execute file: for windows - runit-win.bat; for Linux - runit-linux.sh.
The root is received!
Note: The McAfee Antivirus software started tagging a file 'mempodroid' within this ZIP file Tools folder as a virus or malicious file. This rooting method uses the 'mempodroid' exploit which is detected as a VIRUS by McAfee and Qurantined. So restore from Qurantine and check list of files are still present in the folder. If not verify 8+8 files in folders again.
As per inputs in this forum, I restored the files quarantined and then suppressed McAfee SW for the duration of my upgrade activities on my laptop and was able to successfully extract all the files in the ZIP file to a local folder on the laptop. This ZIP file has adb and fastboot - two key programs useful for rooting your A500 apart from SU or superuser base file used in step 2. The file to run is the BAT file runit-win.bat if you are on windows. At the end of this step your tablet should be rooted. You may check by installing the RootCheck app from Google Playstore.
Step1a: Install a File Manager app from the Google playstore. This will help you extract the CPU ID and convert it with the SBK tool to get the SBK number/string. important steps SBK tool was available in file - SBCalc_v1.1.ZIP available in this forum.
STEP 2b: SUPERUSER and SUPERSU installation
1. Install SuperUser.apk first.. (IMP - Its available in this forum. Its like a base version for superSU to install over. If you do not install SuperUser.apk, then each time you try installing SuperSU, you would get an error message about a SU file being incompatible.)
2. Then install an older version of SuperSU downloaded from the website - filename -> eu.chainfire.supersu_v2.65-265.ZIP . Newer versions will not work. U got to install an older version as new version seems to be a paid SW.
3. Next Open SuperSU app on your tablet and let it update itself a couple of times each time opening and closing the app after the upgrade.
4. Remove SuperUser.apk file as now its no longer needed.
5. Now that you have ROOT access and SuperUSer access
6. Install Titanium Backup. File name in this forum- update-recovery-TWRP-rev2.0-beta4.ZIP . This will help you to flash/upgrade ROM software on your tablet.
Twrp 2.8:
http://www.mediafire.com/file/e7wpny5f39vw3pc/update-recovery-TWRP-rev2.0-beta4.zip/file
Compressed Archive (.ZIP)
File size: 4.91MB
Uploaded: 2018-08-14 21:40:26
https://www.mediafire.com/download/e7wpny5f39vw3pc
STEP 3: Install an Unlocked Bootloader i.e. unlocked bootloader Skrillax v9 - file name in this forum BabSector.rar or A500-Bootloader-Nvflash.ZIP
Once you have reached this step, you now have the basic tools needed for the final ROM upgrade of the tablet.
I did get error message after the reboots that happened after Unlocking the Bootloader. Someting about a LNX partition not being okay or some such msg. Each time I just WIPED the Cache and selected similar options to wipe System, Data, User, Dhelvic cache (spelling incorrect) etc. Since you have not installed the final OS or ROM for your tablet yet, no harm in deleting these partition data. Actually its recommended to wipe, format in f2f formats etc. all of which is possible using the TWRP Recovery software you installed in step 2. Choose Recovery menu option each time the tablet boots or gives errors.... using the volume rocket and power buttons. More info -> Go through this thread and install unlocked bootloader.
https://forum.xda-developers.com/showthread.php?t=1622425
Flashing Bootloader Steps
-------------------------
1. generate your SBK from cpuid
2. put tab in APX by holding reset (small pinhole bottom right side)
and pushing power for 3-4 sec. - then release reset approx 1 sec. later
the screen should be blank and power button should be lit - plug in USB to PC.
2. Run A501 A.bat - when finished reboot tab to recovery (win 7 and under
right click on A501 A.bat and select Run as Administrator)
3. run Recovery(power and volume-) ->WIPE -> "Advanced wipe ->System (only)and swipe to wipe.
4. unplug USB and reboot tab to APX
5. plug in USB afer it is in APX mode -> Run A501 B.bat (win 7 and under
right click on A501 B.bat and select Run as Administrator)
Bootloader unlock tutorial
--------------------------
Step 1: Get your cpuid - https://forum.xda-developers.com/showthread.php?t=1624645
Step 2: Convert it into an SBK - https://forum.xda-developers.com/showthread.php?t=1810618
Step 3: Download the A500 drivers
- http://www.mediafire.com/file/pde8rojv1t8gnif/USB_Acer_1.00.0524_A30H_A31H_A32H_A500_A501.zip/file
Step 4: Download the files to install the bootloader
- http://www.mediafire.com/file/o7m2ouwo6zuod4d/A500-Bootloader-Nvflash.zip/file
Step 5: Follow the instructions in "how to.txt"
Step 6: Download a rom and flash in twrp
This tutorial is based of
https://forum.xda-developers.com/showthread.php?t=2450119 thread so big thanks to KaijiKun .
Bootloader unlock files:
http://www.mediafire.com/file/o7m2ouwo6zuod4d/A500-Bootloader-Nvflash.zip/file
STEP 4. Downloaded file omni-4.4.4-20150210-a500-IconiaHD.ZIP as I was not sure version omni 5.1.1 was as stable as Omni4.4.4 reading all the threads in this forum.
First rename the downloaded OMNIROM file as update.zip .
OmniRom 4.4.4
http://www.mediafire.com/file/ghd72j3g618kk9g/OMNIROM-5.1.1-Tegraowners_ROM_v13t2.zip/file
File size: 244.66MB
Uploaded: 2015-04-05 17:40:14
STEP 5: Install another tool adb_fast.ZIP. This tool is also available in this forum.
Note:You need to copy the update.zip file to your computers folder where this tool adb_fast is installed. In mine it was C:\Program files (x86)\Minimal ADB and Fastboot folder. This adb_fast file creates an application shortcut on your computer desktop. Clicking on the short cut launches adb and fast boot programs I mentioned at the beginning.
STEP 6: Copy the file to the SD card (16GB) of your tablet.
Run the adb_fast tool from your desktop shortcut. This will open a Command Prompt type black screen window where you can enter the code as given below. Note you may need to see how your SD card is listed in a file manager in your computer
Code:
adb push update.zip /mnt/sdcard/update.zip --- NOTE: this creates mnt folder on internal storage and I had to then move the file using TWRP recovery tool installed in step 2, to the SD card.
adb push < ------- is the push command.
rom.zip < ------- is the name of the Rom zip file.
/sdcard < ------- is the location your pushing the Rom to.
E.) Reboot tablet with Power+Down Arrow i.e. This will start the Upgrade process for the tablet to OMNIROM 4.4.4
-- Power Button + UP VOLUME pressed... then release Power button after LED lights.
-- System will boot to commmand prompt
STEP 7: Install GAPPS using pico gapps short version and Wipe Data/Factory reset ----------------?>and wipe cache partition?
Reboot after 1st reboot
G.) https://opengapps.org/ to install a minimal version of Google Apps on the tablet.
File name -> pa_gapps-modular-mini-4.4.4-20150410-signed.ZIP
Root tablet again and install SuperSU if you need it
other info.
You can use TWRP to flash the OmniROM on the tablet or you can use the following in worst case senario to do the same.
Code:
fastboot devices
fastboot flash update.zip -- check if syntax is ok from threads in this forum
fastboot reboot-bootloader
copied below from other threads ---->
I find that a large amount of complaints in developer threads are due to people not properly wiping before a flash.
Of course there is times when a 'dirty' flash is fine, but if you're ever not sure, wipe as cleanly as possible.
fastboot allows for about the cleanest of wipes by the way. And each partition can be done separately too.
Code:
fastboot erase system
fastboot erase data
fastboot erase cache
can all be done individually, but to do these all in one command
Code:
fastboot erase system -w
If possible I recommend to do these steps before flashing a ROM, and now that you know you can do this all within fastboot mode i suggest to try it out, its quick and painless!
Don't forget to wipe your kernel too! (fastboot erase boot)
~Important~ If your device uses an emulated SD card (as in no removable micro SD but an SD partition on phone)
Then be careful wiping data/userdata as this will erase all contents of internal SD - you are forewarned!
ADB= Android Debugging Bridge (ADB)
[TOOL]Minimal ADB and Fastboot [2-9-18]
https://forum.xda-developers.com/showthread.php?t=2317790&page=12
First a short explanation:
Fastboot, like ADB, is a tool to communicate from PC to Android phone. There are times when it is a must to use, and times when it is just helpful.
ADB is used within your recovery or within your OS, but when you are in bootloader mode and need to communicate with your phone then you need fastboot.
And you may ask why would i ever need this?
Well many reasons. Main one is knowledge, learning the ins and outs of fastboot, like learning ADB, can get you out of many jams.
And if you want to unlock your bootloader this is done through fastboot. Granted HTC's unlock is... well crap, but for a Nexus this is how its done.
One other reason I have to stress is learning for safety reasons, This is about the safest way possible to flash firmware to your phone (ie Radio, Hboot, Recovery)
Lastly you may want to know the limitations,
There are many of course, this isnt JTAG, it will not resurrect a hard brick, but it often save peoples phones from 'soft bricks' and lots of time when know how and when to use it.
Think of fastboot as the program that takes over when ADB cant be used, it works with firmware more than software.
https://forum.xda-developers.com/showthread.php?t=1624645&page=3
GUIDES
---------------
Civs Guide to flashing the bootloader http://forum.xda-developers.com/showthread.php?t=1622425
Walkthrough using APXFLASH tool at Step 6 http://forum.xda-developers.com/showthread.php?t=1624645&page=2
From Civato's OP of The Guide: nvFlashToolPackages
Skrilax_CZ bootloader thread http://forum.xda-developers.com/showthread.php?t=1619913 and should be "required reading" for anyone mucking about in their tabs internals!!!!
Rollback to HC
jazzyjames guide http://forum.xda-developers.com/showthread.php?t=1516012
Iconia Root http://forum.xda-developers.com/showthread.php?t=1138228 /gingerbreak: For returning to Honeycomb
----------------
To get my CPUID, I have followed the steps below:
Open yr file explorer, esfile explorer is a great one....navigate to:
/sys/firmware/fuse/acer_cpuid - add a zero to the front!
To get CPUID get a Root browser of some sort and go to sys/firmware/fuse/acer_cpu_id
convert my CPUID into SBK?
--------------------------
https://forum.xda-developers.com/showthread.php?t=1055354&page=6
What Does Root Give Me?
1. Full control over your system
2. Ability to alter system files. You can replace many parts of the "Android Core" with this including:
o Themes
o Core apps (maps, calendar, clock etc)
o Recovery image
o Bootloader
o Toolbox (linux binary that lets you execute simple linux commands like "ls") can be replaced with Busybox (slightly better option)
o Boot images
o Add linux binaries
3. Run special apps that need more control over the system
o SuperUser (lets you approve or deny the use of root access to any program)
o Task Manager For Root (Lets you kill apps that you otherwise could not kill)
Tether apps (like the one found at [android-wifi-tether.googlecode.com])
4. Backup your system
o You can make a folder on your SDCARD and backup all of your .APK files to your SDCARD (helps if an author decides to "upgrade" you to a version that requires you to pay to use the version you just had)
5. Relocate your (browser/maps/market) cache to your /sdcard
6. Relocate your installed applications to your /sdcard
7. Reboot your phone from the terminal app easily (su <enter> reboot <enter>)
Turn the rotation lock off.
-------------------------------------------------------
SUMMARY - Regardless of version, rooting is the same... next
** Unlock the bootloader.
** Fastboot flash a Custom Recovery (TWRP).
** Download to the Tablet, Chainfire's SuperSU root updater .zip
** Boot into the previously fastboot flashed Custom Recovery, and flash the SuperSU updater .zip.
** Reboot - you're rooted.
-------------------------------------------------------
PS. I tried to maintain a log in Notepad during my upgrade. Unfortunately did not write detailed instructions and link to required files. Above is a summary of what worked for me.

Can not root
sukasis said:
First my thanks to the forum key members for providing answers to queries and to all the key contributors of SW/ROMS in this forum. I followed the procedures from this forum to Flash / upgrade my Acer Iconia A500 on 4.0.3 ICS that was sitting in a trunk for the last few years. Summary of steps I tried out.
STEP 1: Install the Acer device drivers listed in the links in this forum on your Laptop/Computer even if by default your Windows 10 OS (assuming you are on Win10 like me) is able to recognize the A500 connected to the USB port.
USB_Acer_1.00.0524_A30HA31HA32H_A.ZIP
STEP 2: ROOTING the Acer A500.
1. The tablet should be already upgraded to stock ICS for A50x (or stock ICS A10x/A510 for other tablets).
2. On a tablet: "Settings" -> "Applications" -> "Development" -> "USB debugging" switch ON. If you do not see this menu, then click 7 times of the Android Build No. listed under settings and come back to the menu above to enable USB Debugging.
3. Connect the tablet to the computer (Before connection it is recommended to update the driver for a tablet from here: A10x, A50x, A510).
4. Since most of the discussions regarding flashing A500 were from 2011, the earlier Gingerbreak method for rooting did not work.
I downloaded the following file from this forum to root my tablet.
ICS_rooting_A10x_A5xx.zip
5. Open the directory with the unpacked archive. Execute file: for windows - runit-win.bat; for Linux - runit-linux.sh.
The root is received!
Note: The McAfee Antivirus software started tagging a file 'mempodroid' within this ZIP file Tools folder as a virus or malicious file. This rooting method uses the 'mempodroid' exploit which is detected as a VIRUS by McAfee and Qurantined. So restore from Qurantine and check list of files are still present in the folder. If not verify 8+8 files in folders again.
As per inputs in this forum, I restored the files quarantined and then suppressed McAfee SW for the duration of my upgrade activities on my laptop and was able to successfully extract all the files in the ZIP file to a local folder on the laptop. This ZIP file has adb and fastboot - two key programs useful for rooting your A500 apart from SU or superuser base file used in step 2. The file to run is the BAT file runit-win.bat if you are on windows. At the end of this step your tablet should be rooted. You may check by installing the RootCheck app from Google Playstore.
......
Click to expand...
Click to collapse
Hi sukasis, i was unable to root the tablet. I download all and run the runit.win.bat (trying normal, as admin, and open a cmd as admin and then navigate to the bat to execute).
- It say device connected
- Then push 7 files correctly
- Executing of the main script. (it freeze here a lot of time)
Then error: protocol fault (no status)
The file "su" isn't created
Not getting root!
I try in USB 3.0 and 2.0 same error.
I have windows 10.
I uncheck the Debugging mode and it's bring another error, so i believe the connection is good because in debug mode can push files.
I don't know whate else i can do.