Related
This post is for the members who has limited access to to development section for replying to the thread.
So I have started this Forum for the same to get your feedback and suggestions or you faced any issue report it.
ROM Images
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Feel free to post your observation and Bug report.
Those who has not yet viewed my thread over development here is the link
VIVEK's ROM v6.0 (JPU)
Thanks.
Apologize and for my bad English
I installed G3MOD 1.9 and your ROM v1.1 after a few days of use I noticed that you do not show the battery status properly, whether it's a bug, or are not using the battery 1% mod
Sent from my GT-I5800 using XDA App
i am using ur rom 1.1 its fast and clean. i m useing app2sd but when install rom its show 170 mb free in internal memory but after install all aps from back up its show only 91
whats wrong .plzzz give me replay.
zvonac99 said:
Apologize and for my bad English
I installed G3MOD 1.9 and your ROM v1.1 after a few days of use I noticed that you do not show the battery status properly, whether it's a bug, or are not using the battery 1% mod
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
Thanks for the feedback , G3mod 1.9 performance is already there in the ROM No need to install install it separately . Yup its a bug which I'm working on ...and will release the update for the same soon.
surtinira said:
i am using ur rom 1.1 its fast and clean. i m useing app2sd but when install rom its show 170 mb free in internal memory but after install all aps from back up its show only 91
whats wrong .plzzz give me replay.
Click to expand...
Click to collapse
Hi Surtinira,
Thanks ,1st tell one thing , did you partitioned your sd card to be able to use App2sd , if not then do it as follows
1) .. reboot in recovey
2) choose Miscellaneous option
3) choose partion sd card
4) Choose size for swap (128MB by default) and for app2sd any size of your like 512MB or above.
and proceed with the format , your data will remain instact (else for precuation do take a backup).
If you have partiopned also boot in recovery and do a wipe data / factory reset and reboot.
Now check if you have done as below procedure for the backup.
When you reboot , you 1st install Titanium backup . Open it
Press the left key => choose PREFERENCES ==>Restore backup to...(select ) ==> Internal storage
App2sd will do the rest. Do reboot the phone when you are done with backup and then check if it still shows same do let me know.
Also let me know how many application have you installed post installation.
So that it can give an idea ..as internal memory will be used surely as Sd partion is mapped to SDcard ext.
Hope this will help
vivekchamoli said:
Hi Surtinira,
Thanks ,1st tell one thing , did you partitioned your sd card to be able to use App2sd , if not then do it as follows
1) .. reboot in recovey
2) choose Miscellaneous option
3) choose partion sd card
4) Choose size for swap (128MB by default) and for app2sd any size of your like 512MB or above.
and proceed with the format , your data will remain instact (else for precuation do take a backup).
If you have partiopned also boot in recovery and do a wipe data / factory reset and reboot.
Now check if you have done as below procedure for the backup.
When you reboot , you 1st install Titanium backup . Open it
Press the left key => choose PREFERENCES ==>Restore backup to...(select ) ==> Internal storage
App2sd will do the rest. Do reboot the phone when you are done with backup and then check if it still shows same do let me know.
Also let me know how many application have you installed post installation.
So that it can give an idea ..as internal memory will be used surely as Sd partion is mapped to SDcard ext.
Hope this will help
Click to expand...
Click to collapse
thxx for give me ans
i have done all and in Titanium backup show app2sd partition like in up ur image but its ok
today i m flash ur rom 1.1 agine and folow ur instuction if someting wrong i will tell u.
and one more thing how to enable SuperCharger script and 9 lockscreen in ur rom????????
Good job
vivekchamoli said:
Thanks for the feedback , G3mod 1.9 performance is already there in the ROM No need to install install it separately . Yup its a bug which I'm working on ...and will release the update for the same soon.
Click to expand...
Click to collapse
To clarify, I have already installed G3MOD 1.9, I used your ROM img
I confirm this bug
http://forum.xda-developers.com/showpost.php?p=17939355&postcount=37
I use Google Translator
zvonac99 said:
To clarify, I have already installed G3MOD 1.9, I used your ROM img
I confirm this bug
http://forum.xda-developers.com/showpost.php?p=17939355&postcount=37
I use Google Translator
Click to expand...
Click to collapse
Thanks Zvonac,
I had worked this weekend over the framework and I'll be Uploading it shortly. All issue reported till now has been resolved in it. ( Version 2.0 )
Cheers.
zvonac99 said:
Apologize and for my bad English
I installed G3MOD 1.9 and your ROM v1.1 after a few days of use I noticed that you do not show the battery status properly, whether it's a bug, or are not using the battery 1% mod
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
Hi Zvonac99,
The issue is fixed in the New release i.e V 2.0 .
Check it out .
If you facing any other issue do let me know
Thanks
Cheers.
surtinira said:
thxx for give me ans
i have done all and in Titanium backup show app2sd partition like in up ur image but its ok
today i m flash ur rom 1.1 agine and folow ur instuction if someting wrong i will tell u.
and one more thing how to enable SuperCharger script and 9 lockscreen in ur rom????????
Click to expand...
Click to collapse
Hi in version 2.0 , 9 lock-screens are added as well as if you want to add supercharger script simply copy the script to /system/etc/init.d/ and then either using adb or terminal within the phone browse to the mentioned location above and then type sh
superchargerscriptname , and follow steps .
all issue reported are fixed now.
vivekchamoli said:
Hi in version 2.0 , 9 lock-screens are added as well as if you want to add supercharger script simply copy the script to /system/etc/init.d/ and then either using adb or terminal within the phone browse to the mentioned location above and then type sh
superchargerscriptname , and follow steps .
all issue reported are fixed now.
Click to expand...
Click to collapse
thankxxxx ur rom is very clean and i have done update vivek v2 and its fix font problem,some bug,speed then 1.1,new notification bar and most positive part is without any reboot ,bug its going smooth and my battery lift is only use 30% after use all day play game,send file,play videos,use internet thru wifi.
thank u very much for great rom
Bro swype is not working it says install update for further use of it.I really wanted it.It's awesome and update not available in market damn!!! I am from pune btw nice rom !!!
vishal8492 said:
Bro swype is not working it says install update for further use of it.I really wanted it.It's awesome and update not available in market damn!!! I am from pune btw nice rom !!!
Click to expand...
Click to collapse
Hi vishal, thanks , yup i have checked that and will update swype by Mid night today.
Sent from my GT-I5800 using XDA App
surtinira said:
thankxxxx ur rom is very clean and i have done update vivek v2 and its fix font problem,some bug,speed then 1.1,new notification bar and most positive part is without any reboot ,bug its going smooth and my battery lift is only use 30% after use all day play game,send file,play videos,use internet thru wifi.
thank u very much for great rom
Click to expand...
Click to collapse
Thanx a lot Surtinira for the testing and being so active to report bugs
Cheers.
Sent from my GT-I5800 using XDA App
Hey can you also look into adding shuffle all option to samsung stock music player and as well delete option in menu while playing song.That would be really great for me as I like default player but missing this.
Hi, thanks for the rom. So far the best I've tried. I have a small problem. After updating from 1.1 to 2.0, can not connect to Kies. This use to backup contacts.
Nery070 said:
Hi, thanks for the rom. So far the best I've tried. I have a small problem. After updating from 1.1 to 2.0, can not connect to Kies. This use to backup contacts.
Click to expand...
Click to collapse
Hi , kies issue is going with all the ROMS ( its basically driver isssue which normally gets fixed by un-installing and installing Driver from Kies --> tool menu) way to resolve this issue is to download "SMS and Contact Backup " app from markrt and backup all the contacts and sms as well . and later you can restore the backup from the sdcard and also from sdcard you can take the contact backup .
vishal8492 said:
Hey can you also look into adding shuffle all option to samsung stock music player and as well delete option in menu while playing song.That would be really great for me as I like default player but missing this.
Click to expand...
Click to collapse
Hi ,
thanks for the suggestion , if you want to hv that feature you can install honeycomb 3.0 music player.
This will require a bit of coding to be done , which will consume lots of time and now a days I'm a bit busy with work . I will try to make these changes over it later
Best ROM I ever tried..!!!
This is straight up the best ROM i came across....simple, clean & fast.....and battery life AMAZING!!!!!
Performance?????........very very good!!!
I was able to successfully update to 2.0 from my stock ROM that i reverted to, because the previous ROM i was using wasn't stable at all.
Very good installation tutorial as well!!!!
however.. i found sum bugs,,which isn't really of issue....but could make your ROM flawless!!
1) Maps don't work, as well as Places app... i keep getting a no network error every time i try connecting!!..& sometimes it just keeps loading...and loading...& loading..... doesn't stop loading actually!!!
2) Call end tone doesn't work.... whenever a call ends you aren't notified by the tone... I kinda like knowing when the call ends!!
Like i said its not much of a problem, but thats the errors i found so far..!
Thanks again 7 keep up the excellent JOB!!!!!
Please help. What can I do for a greater battery life?? Compared to other ROM (Indroid) half. I would like to keep Vivek ROM is really cool, but this bothers me and it's pretty fundamental problem. : Zmatený:
Hi All,
The Links shared below is not a work of mine. The complete information is found in russian site.
http://forum.china-iphone.ru/viewto...sid=af9b3aed965ded10f32b2d5f239a2560&start=40
I found it as useful to share the tool here. I am not a devloper of this work
Below are the complete tool for flashing & Rooting Spice MI-350.
Latest 2.3.5 ROM
http://forum.xda-developers.com/showpost.php?p=19866590&postcount=65
Flashing Tool
http://*******/58AMd
Tutorail for Flashing(Thanks for russian site)
http://www.youtube.com/watch?feature=player_embedded&v=gXmbAaDus00
Rooting tool
http://www.multiupload.com/0YGBOQCLD0
Rooting Instructions
1. Double click the open the "A60-tools-v2"
2. Holding down the "volume -" and "Menu" keys, while power on the phone, until the first picture display
3. Connect the phone to the computer via USB cable
4. Input "1" and enter in the computer
5. After that, enter and reboot the phone.
Your phone will have root access now
ADB Drivers
http://j.gs/ZDH
HoneyComb % Battery Mod
http://www.multiupload.com/9HT0SK4DX3
Flash tha attachment with Recovery tool in the third post.
Optional : Please backup before flashing it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits:
1. for the rissian site for providing the Flasing tools.
2. ankjain - for providing the information
I am not responsable for any damage happen to your device during the process...
Fell free to hit thanks button if you find the info as useful...
Applications
Browser
http://www.multiupload.com/9DSTCBL2SH
Instrucions - After rooting The browser wil force close because the rooting toll will replace the default browser.
move the 2 contents present in attachment to /system/app/ using root explorer.....
and set permissions as in above screen shot. once it is done reboot the phone.
Calender
http://www.multiupload.com/TWQ775GSVN
move the Calender present in attachment to /system/app/ using root explorer.....
and set permissions as in above screen shot. once it is done reboot the phone.
Gtalk With Audio/Video Chatting - Don't use it(Lot of users are facing issues)
http://www.multiupload.com/2IDZFG7372
Make a normal install and open it once it is completed. it will automatically installs and reboot.
Once reboot you can uninstall it. Requires root.
Working Games
http://forum.xda-developers.com/showpost.php?p=19365176&postcount=17
Fell free to hit thanks button if you find the info as useful...
Recovery for Spice MI-350
How to use Recovery?
Download the revovery tool form the below link
http://www.multiupload.com/9EW6OMMTU4
1. Copy Recovery.img and M44tools.apk to the root of SDCard
2. Install M44tools.apk and once compete open it. and click Get started
3. select the item Flash Recovery From SdCard(i.e Recovery.img). We look forward to completing the process and phone will be rooted to recovery.
Now you can flash files through recovery
How to go to Recovery?
There are two ways:
1. Through the program Mobileuncle Tools (select Reboot To Recovery )
2. In the phone off, hold down the " + "volume, press the power button
How to flash firmware / update / fix through recovery?
See the image below
Fell free to hit thanks button if you find the info as useful...
Installation of Applications
mohanparvatham said:
-------reserved-------
Click to expand...
Click to collapse
Dear!!
Still have problem in installing paid applications. Just could not download them through "Market". In case applications are installed through other sites, they are not getting updated!! Hope you will come out with a solution.
Solomon
jgsolo27 said:
Dear!!
Still have problem in installing paid applications. Just could not download them through "Market". In case applications are installed through other sites, they are not getting updated!! Hope you will come out with a solution.
Solomon
Click to expand...
Click to collapse
i am not aware of it.....try to use the latest market 3.3.11....
mohanparvatham said:
i am not aware of it.....try to use the latest market 3.3.11....
Click to expand...
Click to collapse
Thanks. I have tried so many things. With old as well as latest ver. of Market also I have tried. Nothing worked out!!!
Custom ROM for Spice MI 350
dear freinds
this is really wonderful to see that many ppl are coming here in search of truth. lol.. well sort of as spice didn't specified that its lenovo A60 .
any way for past 2-3 days i am working on to build custom ROM for lenovo A60 aka spice.
actually custom roms are already there in russian forum but as usual the language and other issues are quite rampant.
i wanted to have a clean bloat free rom which is lighter and fast and i think that i am quite near to it. the Beta rom which i am using right now has free rom of about 50-6o MB. obviously some bugs are there so i am trying to remove them asap. but seriously this is far better than stock rom .
some features that will be there
pre rooted
busybox already installed
sony arc launcher
removed all spice bloatware
deodexed ( bugs are there)
bettery % mod
give me some time and u will get it.
regards
ankjain
ankjain said:
dear freinds
this is really wonderful to see that many ppl are coming here in search of truth. lol.. well sort of as spice didn't specified that its lenovo A60 .
any way for past 2-3 days i am working on to build custom ROM for lenovo A60 aka spice.
actually custom roms are already there in russian forum but as usual the language and other issues are quite rampant.
i wanted to have a clean bloat free rom which is lighter and fast and i think that i am quite near to it. the Beta rom which i am using right now has free rom of about 50-6o MB. obviously some bugs are there so i am trying to remove them asap. but seriously this is far better than stock rom .
some features that will be there
pre rooted
busybox already installed
sony arc launcher
removed all spice bloatware
deodexed ( bugs are there)
bettery % mod
give me some time and u will get it.
regards
ankjain
Click to expand...
Click to collapse
I have already created the % Circular mod for battery and i have tested in my mobile......
As of now working fine...Tomorrow i will share the link.....You need the recovery tool present in third post to flash it....
I have attached the battery mod in OP and it working perfectly on my stock rom...i need some more testers to conform it....
successful root... Application settings Force Close
Thanks a ton mohanparvatham!
I was able to root the spice mi-350 earlier and messed up with installing a battery mod from another custom ROM. The phone was constantly resetting
Then I found your post to reflash the phone and was successfullly able to recover my phone Thanks a ton!
BTW, the following settings doesn't work after root.
Settings>Applications>Manage applications
or
Settings>Applications>Running processes
It ends up with a crash... "The application Settings (process com.android.settings) has stopped unexpectedly. Please try again. Force Close
"
Has anyone seen this??
Thanks,
Bhaskar
---------- Post added at 04:21 AM ---------- Previous post was at 04:12 AM ----------
jgsolo27.. I faced similar issue with paid apps... I had a Pocket Casts app and was not able to install it..
bosscar said:
Thanks a ton mohanparvatham!
I was able to root the spice mi-350 earlier and messed up with installing a battery mod from another custom ROM. The phone was constantly resetting
Then I found your post to reflash the phone and was successfullly able to recover my phone Thanks a ton!
BTW, the following settings doesn't work after root.
Settings>Applications>Manage applications
or
Settings>Applications>Running processes
It ends up with a crash... "The application Settings (process com.android.settings) has stopped unexpectedly. Please try again. Force Close
"
Has anyone seen this??
Thanks,
Bhaskar
---------- Post added at 04:21 AM ---------- Previous post was at 04:12 AM ----------
jgsolo27.. I faced similar issue with paid apps... I had a Pocket Casts app and was not able to install it..
Click to expand...
Click to collapse
Using root explore go to /System/app/ and check for the application LenovoApplicationsManager.apk. if it is not there you will get the error...
Thanks mohanparvatham!
yes LenovoApplicationsManager.apk is missing under system\app... It only has LenovoApplicationsManager.odex...
Do you have any idea where i can find this apk?
Thanks,
Bhaskar
---------- Post added at 06:14 AM ---------- Previous post was at 05:56 AM ----------
Thanks mohanparvatham!
the circular battery mod works like a charm
bosscar said:
Thanks mohanparvatham!
yes LenovoApplicationsManager.apk is missing under system\app... It only has LenovoApplicationsManager.odex...
Do you have any idea where i can find this apk?
Thanks,
Bhaskar
---------- Post added at 06:14 AM ---------- Previous post was at 05:56 AM ----------
Thanks mohanparvatham!
the circular battery mod works like a charm
Click to expand...
Click to collapse
I will share the application later....thanks for testing the battery mod....
Here is the APK file...
copy using root explorer to /System/app/ and set the permissions....
Feel free to hit thanks button if u feel the information as useful...
Well This is Great Dude, You all have Started a Development Thread for Spice MI 350, Really It is a good budged Phone with host lot of feature inbuilt, Concern arises when it comes to memory, the Phone Lags a Lot with the Stock Rom isn't it, is there any way for all user who just has a passion of having two Sims bought this phone, Spice has a third class customer care and after sales service we can't hope more from those bunch of junks...
How to Get RID of those unwanted Apps installed Like Bollywood Ji, Teen Patti Blaa Blaa ...
the 2nd Seem does not works on incoming calls, when the 1st 3G Sim is connected to Internet Have you all noticed it, Or I am Having some Settings Wrong, has tried and changed all the setting available under sim manegment, but without any help,
Guys Please help Me As I am in a desperate need to have the 2nd SIM working with Incoming Calls...
and is there any custom ROM Available for this phone which has a decent speed..
Awesome thanks mohanparvatham - LenovoApplicationsManager.apk!
@Kamal_halder - After rooting, try to install "Absolute System Root Tools" and was able to remove all the bloatware from SPICE...
It feels really good to have a clean phone...
rooting is powerful
Instant upload on Google+ not working in Spice-Mi350
One of the cool feature of G+ is the instant upload of photos from the mobile to a private gallery. But somehow it is not working in Mi350... I have installed the latest version (Build version 2.1.1.219805) and have enabled instant upload in the settings.. still it doesn't work. Also the upload all photos option doesn't work.
Has anyone faced similar issue?
Games Working on SPICE MI-350
I have tried the below games and working perfectly....
1. Dangeon Hunter 3.1.1(Working Without Issues)
2. Raging Thunder 1.0.7(Working Without Issues)
3. Raging Thunder 2 1.0.8(Working-Use Chainfire3D with QualComm Plugin)
4. NFS Shift 1.0.62(Working-Use Chainfire3D with QualComm Plugin)
5. Hero Of Sparta 3.4.0(Working-Use Chainfire3D with QualComm Plugin)
6. Gangster 3.5.0(Working-Use Chainfire3D with QualComm Plugin)
7. Sandstorm 3.1.5(Working-Use Chainfire3D with QualComm Plugin)
8. Avatar 3.1.5(Working-Use Chainfire3D with QualComm Plugin)
9. Assassin's Creed HD 3.4.6(Working-Use Chainfire3D with QualComm Plugin)
Not working...
SpiderMan HD(Not working)
Waiting for other replies.....
Feel free to hit thanks button if the above info is useful...
Hi Mohan,
After 1st install, opened it, it asks for Supervisor confirmation and its given, after that it just hangs there showing the Photo and the message "Installing Google Video Talk".
Tried again clicking the Video Talk Installer but same... hangs at the message "Installing Google Video Talk"
Any ideas where its going wrong?
mohanparvatham said:
Applications
Gtalk With Audio/Video Chatting
http://www.multiupload.com/2IDZFG7372
Make a normal install and open it once it is completed. it will automatically installs and reboot.
Once reboot you can uninstall it. Requires root.
Click to expand...
Click to collapse
do not install google talk video
Hi MKTW
Please do not install this apk there is some major bugs in this apk ur phone will not recover it will keep on restarting i have already tried this make sure that recovery tool is installed in ur moble otherwise u will need new rom to flash it. Be careful
---------- Post added at 10:26 PM ---------- Previous post was at 10:11 PM ----------
Mohan Sir
Thanks for ur reply. I have now install new rom/USB driver after upgrading my Vista PC.My phone is working fine. I want to know that by pressing home key for long time how task manager bar comes same as that of samsung phones This mobile does not contain task manager to kill hanged apk by pressing home keys. Also please confirms that why system files are crashed while installing google talk video apk .
i'm facing a issue here:
At the 3rd step after completing the process it tried to reboot but it hang with Spice logo (sonam's pic in it)
I had to remove battery and start it.
When i try MobileUncle's Reboot to Recovery, it hangs with Spice logo (sonams pic)
And when i try to go to Recovery Volume - & Power keys it goes to Recovery.
But it shows Munu:
Factory Mode
Full Test
Item Rest
Test Report
Version
Reboot
Where's the Backup & Recovery?
I thought Nand Backup option may come but here the original backup recovery also gone...
Any Recovery image with Nand Backup?
mohanparvatham said:
Recovery for Spice MI-350
How to use Recovery?
Download the revovery tool form the below link
http://www.multiupload.com/9EW6OMMTU4
1. Copy Recovery.img and M44tools.apk to the root of SDCard
2. Install M44tools.apk and once compete open it. and click Get started
3. select the item Flash Recovery From SdCard(i.e Recovery.img). We look forward to completing the process and phone will be rooted to recovery.
Now you can flash files through recovery
How to go to Recovery?
There are two ways:
1. Through the program Mobileuncle Tools (select Reboot To Recovery )
2. In the phone off, hold down the " + "volume, press the power button
How to flash firmware / update / fix through recovery?
See the image below
Fell free to hit thanks button if you find the info as useful...
Click to expand...
Click to collapse
Changelog Final Full B928 ICS Baseband :
Added ICS baseband 404029!
https://docs.google.com/file/d/0B_kPUrNkk3T0QzdFMF82S3N4TE0/edit
Changelog Final B928 :
Fixed cust mount
Fixed operators search
http://narod.ru/disk/59067673001.f141d7d2b078e3f1e1299c0c8522a21f/U8800proB928CWMStockFinal.zip.html
Changelog Test1 B928 :
Fixed low in-call volume.
Rooted.
Nex (final) version: add operators search + add cust mount.
http://narod.ru/disk/59028952001.a9e8740afb149085a05f442fd4849521/U8800proB928CWMStockTest1.zip.html
Changelog Final B927:
Added up-to-date versions of google aplications.
Fixed in-call low sound issue.
Changelog v2 B927:
First boot in english language
Added all stock data/dataapp/ aplications to data/app/ (of course with FMRadio).
Added up-to-date versions of google aplications and Superuser.
No Tweaks no MODs, only rooted.
Changelog v1.1 B927:
Rooted
No Setup Wizard
How To Install:
You must be on 2.3 based ROM and have CWM 5.0.2.7 then:
1: You need to flash Step1 from official B926 for bigger system partition capacity,. If you already have biger system partition, you don't need to do this step.
you can download it here:
http://www.mediafire.com/?u9mvoxjf4lmlu8p
I flashed this UPDATE.APP from CM7.2 SdCard/dload/UPDATE.APP, wihtout battery and Vol+ Vol- POWER. I think that there is lots of ways to do that
2. Download ROM
3. Put it to external SD card and do it as allways, advanced>reboot recovery>wipe data/cache/dalvik cache>Instal ZIP from SD card>Choose zip with ROM's name
THE IMPORTANT INFO FOR ALL!!!
If you want to go back to GB Baseband (404020) having ROM you should flash it in CWM exactly after flashing ROM with GingerBreads Baseband!! If you will not do that, you will have no network connection!!!
https://docs.google.com/file/d/0B_kPUrNkk3T0QmRkTld5SFh5Vm8/edit
If someone want a ICS Baseband (404029) flashable via CWM it's here:
https://docs.google.com/file/d/0B_kPUrNkk3T0TzFsMzZoMjg0QlU/edit
Important information for ROM customizers
Write in you're posts how to go back to GB Baseband (404020).
Thank you!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SemiLite B927 For those who can't repartition system
Changelog:
Removed some Huawey apps
Lots of apps moved to data/app/ to free system partition
How To Install:
You must be on 2.3 based ROM
Put it to external SD card and do it as allways, advanced>reboot recovery>wipe data/cache/dalvik cache>Instal ZIP from SD card>Choose U8800proB927CWMStockSemiLite2.3Partition.zip
Link for download:
Final B927:
http://narod.ru/disk/58370604001.93...927CWMStockFinalSemiLite2.3Partition.zip.html
V2 B927:
http://narod.ru/disk/57810470001.ea...roB927CWMStockV2SemiLite2.3Partition.zip.html
I Cant test this version becouse I already have bigger system partition size.
Be welcome to share you're opinion abaut this release.
Lite version maded by marsilinio
No mods, no tweaks just removed lots unnecesary aplications. If you miss something you can allways download them from the google play.
Final B927
http://narod.ru/disk/58509050001.10...marsilinio U8800proB927CWMStockFinal.zip.html
V2 B927
http://forum.xda-developers.com/showthread.php?p=29307403
Big THANKS to giris for showing the right way, NForce25 for patience, Faith1ezz and marsilinio for community and sharing their knowledge!
WiFi TX Power enabler
http://forum.xda-developers.com/showpost.php?p=29395662&postcount=58
Averybody can make customs by taking them as base.
Please, don't forget about link to the source (original post)
Thank you!
Nice and long-awaited work! :good:
Great work keep it up
Sent from my U8800PRO using Tapatalk 2
that's great
i am also trying to make a rom based on B927.....can you explain me what you have done to make it working with old baseband? (simply because i don't have enough time to flash the rom a hundred times to test it )
IMEI Backup: 5iromtoolbox
matteof93 said:
that's great
i am also trying to make a rom based on B927.....can you explain me what you have done to make it working with old baseband? (simply because i don't have enough time to flash the rom a hundred times to test it )
Click to expand...
Click to collapse
I guess with 5iromtoolbox: :http://forum.xda-developers.com/showthread.php?t=1591997
Awesome post!
Wifi Not Working
The Wifi is not working. When I turn On, automatically turn Off. Any idea?
iceman2029 said:
The Wifi is not working. When I turn On, automatically turn Off. Any idea?
Click to expand...
Click to collapse
did you install 2.3 step1 before flashing this rom?
iceman2029 said:
The Wifi is not working. When I turn On, automatically turn Off. Any idea?
Click to expand...
Click to collapse
Installed not like in 1st post described. Wi-fi works fine, now updating soft from google play via wi-fi.
Do all exactly as in instrucion! You need biger system partition! That should be done by flashing step1 from b926 rom. Link is in instruction for repartition.
Sent from my ragelis
How make a bigger System partition?
bronxitas said:
Do all exactly as in instrucion! You need biger system partition! That should be done by flashing step1 from b926 rom. Link is in instruction for repartition.
Sent from my ragelis
Click to expand...
Click to collapse
I can't complete the Step 1, always say "Update Failed", and I tried all the ways.
Please, you know another way to extend my system Partition?:crying:
Ok soo,in my case->downgrade from ics to gb or just flash the step 1 in vol+- and pwr and then the b927 in cwm
No way for the U8800-51 (Entel Chile) !
mm231982 said:
Ok soo,in my case->downgrade from ics to gb or just flash the step 1 in vol+- and pwr and then the b927 in cwm
Click to expand...
Click to collapse
Yes, that is the correct way, however, my phone is a U8800-51 and I can't use the method DLOAD (vol + - and pwr), always say "Update Failed" (I tried for 5 hours many methods, "return To froyo", "Go to GB" "Huawei European Rom", etc). Must be because it verifies the model and mine is not a U8800Pro, then it fails.
So wondering if there is another way to enlarge my system partition.
Thanks
P.D: For now, Aurora 4 is working excellent, but, I really, really wants this ROM, for the FM Radio!
Tomorow i realese fixed version with fm radio, updated system apps and first boot language eng.
Iceman2029: just wait for lite version.
Sent from my ragelis
iceman2029 said:
Yes, that is the correct way, however, my phone is a U8800-51 and I can't use the method DLOAD (vol + - and pwr), always say "Update Failed" (I tried for 5 hours many methods, "return To froyo", "Go to GB" "Huawei European Rom", etc). Must be because it verifies the model and mine is not a U8800Pro, then it fails.
So wondering if there is another way to enlarge my system partition.
Thanks
P.D: For now, Aurora 4 is working excellent, but, I really, really wants this ROM, for the FM Radio!
Click to expand...
Click to collapse
there is no way to enlarge your system partition I think but you can do what I did to get it working.
just open the .zip file and delete the whole data folder + every app you are not gonna use in system/app (carefull not to delete something important)
Moihack said:
there is no way to enlarge your system partition I think but you can do what I did to get it working.
just open the .zip file and delete the whole data folder + every app you are not gonna use in system/app (carefull not to delete something important)
Click to expand...
Click to collapse
Thanks, let me try.
BTW, I used this post from Geno.Kolar: http://www.modaco.com/topic/341374-custom-you-data-partitions-size/, and now I have supposedly enlarged my system partition, but still I don't have Wifi.
iceman2029 said:
BTW, I used this post from Geno.Kolar: http://www.modaco.com/topic/341374-custom-you-data-partitions-size/, and now I have supposedly enlarged my system partition, but still I don't have Wifi.
Click to expand...
Click to collapse
you have to reflash the rom. if the system partition is not big to fit the whole rom, wifi foler + xbin folder are not copied correctly resulting in non-working wifi & improper root
i have a question?
mm231982 said:
Ok soo,in my case->downgrade from ics to gb or just flash the step 1 in vol+- and pwr and then the b927 in cwm
Click to expand...
Click to collapse
How to downgrade from ics to gb, i have Aurora_4.1_4.0.4_fixed in U8800_51?
Thanks
Aurora based on 2.3 thats why you don't need to downgrade ics is the meaning of official b927 or b926 ROM's.
Today here will be lite version of stock ROM whitch will not need repartitioning.
Sent from my ragelis
Updated first post with v2 version and changelog. I think this is the Final verion of full stock.
Semi Lite version uploading - with posibility to flash on GB system partition size and removed some Huawey apps, other one moved to data/app/.
Lite version will be this evening by marsilinio.
Well , it's time to have some fun with cm7 ...
this is the other sight of CM7 .
is a modded CM7.2 rom , ported over geno's CM7 ports
Thank to genokolar for his great port and kernel
THIS ROM IS 2.3 BASED ROM , SO MUST BE ON GINGERBREAD BASEBAND TO FLASH IT.
Kernel sources from genokolar ... https://github.com/genokolar/android_device_huawei_u8800 ... https://github.com/genokolar/kernel_huawei
GREDITS
Genokolar
Bhupatib for ice10 theme
Changelog
rooted , unlock fps and blablabla........
a modern look of cm7
hdr enabled
new camera apk
new settings apk , with header titles like on ics
new media profiles.xml
modded framework.jar to increase volume steps and changes to scrolling cache
added sony bravia engine mod
build.prop and init.d tweaks
no need to flash gapps
i don't remember what else ...
CM7.2 MOD V1
Changelog
Great improvements , to sound and camera.
Mms apk, supporting 160 characters.
Patched systemui for transparency.
New modern look.
Bootanimation from cm10.
Changed some build.prop and init.d tweaks for the best performance , , responsiveness and speed.
Download , CM7.2 MOD V1 (10/06/2013).
http://www.mediafire.com/download/d8bi5bavzjmpjm3/CM7.2_MOD_V1.zip
Installation
get into recovery
wipe data , wipe cache , wipe dalvik , format system , install zip ...
TIP 1 , MOVE DALVIK TO SD EXT PARTITION TO SAVE MORE SPACE TO DATA ( INTERNAL MEMORY)
1. For moving dalvik cache to sd ext partition , you must partition your sd card through recovery.
So, go to recovery ..
Choose advanced and then partition sd card.
Then choose, ext = 512 ...
Then choose, swap = 0 ...
Let it finish ...
Put the CM7.2_MOD.zip in your sd, and flash the rom.
2.If you allready have a partitioned sd card, then you can skip the above first step.
Then, open root explorer and go to data folder.
Press and hold dalvik-cache folder and choose "move" .
Now go back and paste it to, sd-ext folder.
Press and hold dalvik-cache folder and choose "link to this folder".
Go back to data folder again and "create link" there.
That's it , reboot your phone and enjoy more free space to install applications.
NOTE 1. Rememper that partition sd, deletes everything in sd card, so have a copy of your sd card content to pc, to paste it back to sd.
NOTE 2. If you ever wipe cache and dalvik cache from recovery, then you must do the 2nd step and move dalvik to sd-ext again.
UPDATED , media_profiles.xml (12/08/2013)
For HD 720p video recording
Now you can record 720p video and stereo
There's not an option in camera settings , now option "high" will record 720p videos and stereo sound.
Get this ... media_profiles.zip
With root explorer , Extract it , take "media_profiles.xml" and paste it to "system/etc/" , replace and give permissions ( rw-r--r-- )
Reboot
Done
JB theme for CM7.2 Mod V1
Changelog
16 themed system apps ( accounts and sync,bluetooth,calculator,calendar, contacts, camera, download provider,deskclock,gallery3d, latinime,mms,package installer, phone,settings,systemui and framework res) .
Included, ice10 theme ( thanks to bhupatib ... http://forum.xda-developers.com/show....php?t=2003484 ).
Included, 720p HD camera fix.
No more grey screen after pin.
Download, CM7.2 JBthemeUpdate
http://www.mediafire.com/download/flz8rud4w9ldgfv/CM7.2_JBthemeUpdate.zip
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INSTALLATION
Put the zip in your sd card
Boot into recovery and go to advanced and choose reboot recovery.
Then, wipe cache partition and advanced and wipe dalvik cache.
Then, install zip from sd card/choose zip from sd card/ and choose the CM7.2 JBthemeUpdate.zip
Reboot system now
Wait about 3 min to boot
After phone boots, open theme chooser and apply ice10 theme.
Choose apply anyway
Reboot your phone
Enjoy ...
All GREDITS for ice10 theme goes to bhupatib ... http://forum.xda-developers.com/show....php?t=2003484
Screenshots , here ... http://forum.xda-developers.com/showpost.php?p=44908371&postcount=164
CM7.2 JB theme UNDO
To go back to default CM7.2 MOD theme
Download , CM7.2 JB theme UNDO
http://www.mediafire.com/download/aq...BthemeUNDO.zip
INSTALLATION
Open theme chooser and apply "system" theme
Put the zip in your sd card
Boot into recovery and go to advanced and choose reboot recovery.
Then, wipe cache partition and advanced and wipe dalvik cache.
Then, install zip from sd card/choose zip from sd card/ and choose the CM7.2 JBthemeUNDO.zip
Reboot system now
Wait about 3 min to boot
Enjoy
Took you long enough. Jk.
Your the man gk
Too late for me.
My -51 has cracked digitizer.
Time for change. I feel like dinglia
Sent from my SAMSUNG-SGH-T769.
yippeeee
I had problems with geno's CM7.2
while toggling mobile data, I would get "com.android.phone has stopped working".. all other things I fixed myself...
Now, since YOU are modding it... It has to be AWESOME!
Suggestion- Try libs & boot.img from MIUI_gingerbread (link is below).. That is a super powerful ROM.
[before I could try to do this, I was lured by PACman]
http://forum.xda-developers.com/showthread.php?t=2164951
[ROM 2.3] MIUI - 3D performance + smooth + power saving + stable
Going back to GB once my PC is fixed.
Sent from my GT-i9500 using XDA-Developers app
Somcom3X said:
Took you long enough. Jk.
Your the man gk
Too late for me.
My -51 has cracked digitizer.
Time for change. I feel like dinglia
Sent from my SAMSUNG-SGH-T769.
Click to expand...
Click to collapse
No dont go lol
And GK thanks again! Your works are Forcing me to flash GB again
Sent from my GT-N5100 using xda premium
You are the best! I will flash this ASAP.
Sent from my Dragon-U8800Pro using xda-developers app
Hi, thanks for your work.
I wanted to know if it works correctly the headset microphone, meaning if you can make calls with the headset. In miui 1.12.16 don't work (you can only listen).
I'm trying this new rom and it seems good. I can't automatically synchronize the date and time. some help ...: O
best rom
Best rom. Thanks.
marcolnx said:
Hi, thanks for your work.
I wanted to know if it works correctly the headset microphone, meaning if you can make calls with the headset. In miui 1.12.16 don't work (you can only listen).
Click to expand...
Click to collapse
I don't use headset , someone else must confirm this .... sorry.
baggino said:
I'm trying this new rom and it seems good. I can't automatically synchronize the date and time. some help ...: O
Click to expand...
Click to collapse
What do you mean?
Sync is working fine ..
And if you go to settings/date and time, uncheck the first box and change whatever you like.
Edit
First post updated, with instructions for moving dalvik to sd-ext partition, to save more free space for applications.
Sent from my u8800pro using xda premium
gkalenis said:
What do you mean?
Sync is working fine ..
And if you go to settings/date and time, uncheck the first box and change whatever you like.
Click to expand...
Click to collapse
I know how to set the date and time ... but in the automatic mode does not work. This is not a criticism but just point out ...I noticed I Sim slow Starting
thanks for the new rom :good:
THIS ROM IS 2.3 BASED ROM , SO MUST BE ON GINGERBREAD BASEBAND TO FLASH IT.
Click to expand...
Click to collapse
Where can I get that? I don´t even know what gingerbread baseband means :laugh:
I have now 4.0.3 version from Huawei official page but it boots my device several times a day now.
gkalenis said:
I don't use headset , someone else must confirm this .... sorry.
Sent from my u8800pro using xda premium
Click to expand...
Click to collapse
I will check later.
Sent from my SAMSUNG-SGH-T769.
I will check later.
---------- Post added at 06:56 AM ---------- Previous post was at 06:55 AM ----------
Kames said:
Where can I get that? I don´t even know what gingerbread baseband means :laugh:
I have now 4.0.3 version from Huawei official page but it boots my device several times a day now.
Click to expand...
Click to collapse
Flash step 2 of gb
Sent from my SAMSUNG-SGH-T769.
Somcom3X said:
I will check later.
Sent from my SAMSUNG-SGH-T769.
I will check later.
---------- Post added at 06:56 AM ---------- Previous post was at 06:55 AM ----------
Flash step 2 of gb
Sent from my SAMSUNG-SGH-T769.
Click to expand...
Click to collapse
Sorry but what??
Can someone please give me a link for the official GB? It seems that I deleted it from my computer and huawei servers are REALLY slow :/
Sent from my Dragon-U8800Pro using xda-developers app
SvTeam said:
Can someone please give me a link for the official GB? It seems that I deleted it from my computer and huawei servers are REALLY slow :/
Sent from my Dragon-U8800Pro using xda-developers app
Click to expand...
Click to collapse
http://www.mediafire.com/?7dyy01dzy68ns94 it is B572 i always use this for GB
Thanks bro you are a life saver
Sent from my Dragon-U8800Pro using xda-developers app
Installation
get into recovery
wipe data , wipe cache , wipe dalvik , format system , install zip ...
Click to expand...
Click to collapse
Could I have this in newbie-language also?
SvTeam said:
Thanks bro you are a life saver
Sent from my Dragon-U8800Pro using xda-developers app
Click to expand...
Click to collapse
if you know read greek or with help from google translation i made a tutorial with links about anything you want for update or downgrade from froyo to gb and ics and back and recoveries stock and custom here is my tutorial http://www.myphone.gr/forum/showthread.php?t=343712
don't forget to give a thanks
Kames said:
Could I have this in newbie-language also?
Click to expand...
Click to collapse
You're on ics baseband ..
You must download an official GB rom ( the link is 2-3 post behind).
Then make a "dload" folder on your sd card and put step2 from official GB inside the dload folder.
Then insert your sd card and hold vol+ , vol- and power on.
I have a guide for flashing official firmwares , here ... http://forum.xda-developers.com/showthread.php?p=37953739
You can also do the procedure without battery .... hold the 3 buttons and insert usb cable until phone vibrates ... the update will start.
After update finish, delete dload folder from sd card and power on your phone to boot on official GB.
Then you can enter pink screen, change recovery.img and flash CM7.2 MOD....
Sent from my u8800pro using xda premium
tzivas31 said:
http://www.mediafire.com/?7dyy01dzy68ns94 it is B572 i always use this for GB
Click to expand...
Click to collapse
Kames said:
Sorry but what??
Click to expand...
Click to collapse
Do what the above quote says but only do step 2.
Sent from my SAMSUNG-SGH-T769.
READ THIS FIRST:After downloading "oxygenos_1.0.0.zip" you will notice that it contains a folder with two files:
oxygenos_1.0.0_flashable.md5
oxygenos_1.0.0_flashable.zip
Extract oxygenos_1.0.0_flashable.zip first, then copy it to the SD card, wipe, flash, etc.
MultiROM works!
Check here and click thanks for MMWolverine.
New touchscreen driver to fix ghost touches:
Click here.
__________________________________________
Just a weeeee bit late.
https://oneplus.net/de/oxygenos
__________________________________________
Download it here:
Official:
https://forums.oneplus.net/threads/oxygen-1-0-2-release-with-stagefright-security-patches.340711/
There is a pre-rooted and de-bloated version by @CraZY_BoY^ right here:
[ROM][MOD] OxygenOS - Rooted | Cleaned | Some apps from CM
Features
Screen-off gestures like double-tap to wake, music controls, and shortcuts for the camera and flashlight
Hardware and software navigation keys
Quick settings feature, tiles can be added, removed, and re-organized
Their own file manager, though it's pretty buggy ATM (see below).
Missing features:
Privacy guard
Double tap to sleep
Display color settings
Theming support
Custom camera app (uses Google camera app)
MaxxAudio and Swiftkey (coming in a future update)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation steps:
Please make sure all your data and files are backed up before commencing. Flashing OxygenOS onto CM does require a system wipe, so you will lose all of your data. We are actively working on an easier, more automated solution soon to be available, but for now the build must be flashed manually.
Please proceed only if you are confident in your abilities to flash a custom ROM. This guide exists to help you flash OxygenOS, but things can still go wrong if not followed correctly. While rooting and flashing will not void your OnePlus warranty, any damage caused by improper flashing is not covered under warranty.
The following instructions assume you have Fastboot and ADB installed.
Step 1
You first need to flash a recovery onto your device. We recommend using TWRP. Please download the recovery image to your computer. You can follow their instructions to flash recovery, or you can reference these steps:
Boot into fastboot mode. You can do this on your OnePlus One by holding down the power button and the volume up button. When you see the fastboot logo, connect your device to your computer.
In your terminal window, find the folder where you put the recovery image and run the following commands:
fastboot oem unlock (You can skip this step if your phone’s bootloader is already unlocked).
fastboot flash recovery <recovery.img>. Image file should be the TWRP recovery image.
fastboot reboot
You should now have the recovery installed.
Step 2
Copy oxygenos_1.0.0.flashable.zip to your phone. On a Mac, you can use Android File Transfer.
Step 3
Boot into recovery. You can do this on your OnePlus One by holding down both the volume down key and the power button.
Step 4
Once you are in the recovery interface, the first thing you want to do is a factory reset. Again, you will lose all your data so please make sure you have backed up everything before doing this.
Step 5
After the wipe, go to install and find oxygenos_1.0.0.flashable.zip. Confirm flash. This will flash OxygenOS onto your device.
Step 6
After the flash succeeds, you can reboot the device, which will take you to the new OxygenOS. Enjoy!
If you find yourself wanting to rollback to CM, Make sure you have TWRP or CM recovery on the device. Another factory reset will be needed before flashing unfortunately so make sure you backup all of you data.
Click to expand...
Click to collapse
Source
To revert back to CM11/CM11s:
Flash the latest CM11/CM11s modem from here.
Restore CM11/CM11s from a backup or flash new.
There is no need to reboot between steps 1 & 2.
Rooting Instructions:
Just like CM11s, download SuperSU-v2.xx.zip to your SD card and flash from recovery.
Known issues:
Reported by OnePlus:
When printing images, printer service may stop
Cannot hang up a call using headphone controls (intermittent)
OTG can only recognize FAT32 file system
During system update, display of wifi/data notification may be incorrect
During system update, display of version number may be incorrect
Files sometimes crash when uploading files to the cloud
Files may crash when renaming image files
Files does not support multi-select deletes
Reported here & elsewhere:
4k video is non-functional with Google camera.
Google Play Services wakelocks. Check here for a fix.
Other Stuff
Wallpapers
Boot animation
Modem
Please click thanks for the guys that posted these for you.
CafeKampuchia said:
Just a weeeee bit late.
https://oneplus.net/de/oxygenos
Click to expand...
Click to collapse
Downloadning now! Lets see
very slow..hope for a mirror soon!
CoreGaming said:
very slow..hope for a mirror soon!
Click to expand...
Click to collapse
Its 700 MB
Nice to know, but I'll wait CM12s and then I choose what to do
I'm getting an average 100-150kbs using Firefox and DownloadThemAll. 1 hr 22 minutes left :/
Edit
Mine's shot up to >300kbs - 20 minutes left
Nothing like flashing a new ROM at 1:30AM!
Downloading now - Cant wait to get this thing running!
I am downloading on both my pc and my opo. on my the opo, it's taking 1 hour or so to download. on my pc it took 10 minutes. both on wireless on the same network.
Uploading to mega now, nearly half way, will post a link when finished.
gsmyth said:
Uploading to mega now, nearly half way, will post a link when finished.
Click to expand...
Click to collapse
Send me the link and I'll update the OP ASAP.
3rd feature according to this video is FILE MANAGER ARE YOU KIDDING ME
MEANWHILE STOCK BUG LIST:
When printing images, printer service may stop
Cannot hang up a call using headphone controls (intermittent)
OTG can only recognize FAT32 file system
During system update, display of wifi/data notification may be incorrect
During system update, display of version number may be incorrect
Files sometimes crash when uploading files to the cloud
Files may crash when renaming image files
Files does not support multi-select deletes
HOPING TO ROOT IT AGAIN VIA RECOVERY AND provide my feedback with xposed, viper sound mod etc
I'm really happy with cm12 nightlies, I'll wait for the reviews whats the battery like?
aravindhramachandran said:
3rd feature according to this video is FILE MANAGER ARE YOU KIDDING ME
MEANWHILE STOCK BUG LIST:
When printing images, printer service may stop
Cannot hang up a call using headphone controls (intermittent)
OTG can only recognize FAT32 file system
During system update, display of wifi/data notification may be incorrect
During system update, display of version number may be incorrect
Files sometimes crash when uploading files to the cloud
Files may crash when renaming image files
Files does not support multi-select deletes
HOPING TO ROOT IT AGAIN VIA RECOVERY AND provide my feedback with xposed, viper sound mod etc
Click to expand...
Click to collapse
Bug list in OP already, friend. Good point on the file manager. I'll add that to the OP as well. :good:
vacenzo said:
I'm really happy with cm12 nightlies, I'll wait for the reviews whats the battery like?
Click to expand...
Click to collapse
Dude, nobody even has it installed yet. And even if they do, it's been <1 hr. We'll know something tomorrow. :highfive:
mirror please. cant flash beacuse my download was corrupted and now the download is super slow. :crying::crying:
saar120 said:
mirror please. cant flash beacuse my download was corrupted and now the download is super slow. :crying::crying:
Click to expand...
Click to collapse
Read the comments.
Transmitted via Bacon
Guys, it keeps giving me error when trying to flash. Im on cm nightlies the latest one but for some reason it wont flash... i can flash other roms just fine
this is what happend to me as well. in the middle of the download i switched from wifi to 3g . i thought it was beacuse of that.
zee24 said:
Guys, it keeps giving me error when trying to flash. Im on cm nightlies the latest one but for some reason it wont flash... i can flash other roms just fine
Click to expand...
Click to collapse
Did you extract the zip? There is a flashable zip in the zip you downloaded.
There is a zip inside downloaded zip! Flash that.