[OFFICIAL] Vivek's ROM v6.0 (JPU) Feedback , Report problem encountered, suggestions. - Galaxy 3 General

This post is for the members who has limited access to to development section for replying to the thread.
So I have started this Forum for the same to get your feedback and suggestions or you faced any issue report it.
ROM Images
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Feel free to post your observation and Bug report.
Those who has not yet viewed my thread over development here is the link
VIVEK's ROM v6.0 (JPU)
Thanks.

Apologize and for my bad English
I installed G3MOD 1.9 and your ROM v1.1 after a few days of use I noticed that you do not show the battery status properly, whether it's a bug, or are not using the battery 1% mod
Sent from my GT-I5800 using XDA App

i am using ur rom 1.1 its fast and clean. i m useing app2sd but when install rom its show 170 mb free in internal memory but after install all aps from back up its show only 91
whats wrong .plzzz give me replay.

zvonac99 said:
Apologize and for my bad English
I installed G3MOD 1.9 and your ROM v1.1 after a few days of use I noticed that you do not show the battery status properly, whether it's a bug, or are not using the battery 1% mod
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
Thanks for the feedback , G3mod 1.9 performance is already there in the ROM No need to install install it separately . Yup its a bug which I'm working on ...and will release the update for the same soon.

surtinira said:
i am using ur rom 1.1 its fast and clean. i m useing app2sd but when install rom its show 170 mb free in internal memory but after install all aps from back up its show only 91
whats wrong .plzzz give me replay.
Click to expand...
Click to collapse
Hi Surtinira,
Thanks ,1st tell one thing , did you partitioned your sd card to be able to use App2sd , if not then do it as follows
1) .. reboot in recovey
2) choose Miscellaneous option
3) choose partion sd card
4) Choose size for swap (128MB by default) and for app2sd any size of your like 512MB or above.
and proceed with the format , your data will remain instact (else for precuation do take a backup).
If you have partiopned also boot in recovery and do a wipe data / factory reset and reboot.
Now check if you have done as below procedure for the backup.
When you reboot , you 1st install Titanium backup . Open it
Press the left key => choose PREFERENCES ==>Restore backup to...(select ) ==> Internal storage
App2sd will do the rest. Do reboot the phone when you are done with backup and then check if it still shows same do let me know.
Also let me know how many application have you installed post installation.
So that it can give an idea ..as internal memory will be used surely as Sd partion is mapped to SDcard ext.
Hope this will help

vivekchamoli said:
Hi Surtinira,
Thanks ,1st tell one thing , did you partitioned your sd card to be able to use App2sd , if not then do it as follows
1) .. reboot in recovey
2) choose Miscellaneous option
3) choose partion sd card
4) Choose size for swap (128MB by default) and for app2sd any size of your like 512MB or above.
and proceed with the format , your data will remain instact (else for precuation do take a backup).
If you have partiopned also boot in recovery and do a wipe data / factory reset and reboot.
Now check if you have done as below procedure for the backup.
When you reboot , you 1st install Titanium backup . Open it
Press the left key => choose PREFERENCES ==>Restore backup to...(select ) ==> Internal storage
App2sd will do the rest. Do reboot the phone when you are done with backup and then check if it still shows same do let me know.
Also let me know how many application have you installed post installation.
So that it can give an idea ..as internal memory will be used surely as Sd partion is mapped to SDcard ext.
Hope this will help
Click to expand...
Click to collapse
thxx for give me ans
i have done all and in Titanium backup show app2sd partition like in up ur image but its ok
today i m flash ur rom 1.1 agine and folow ur instuction if someting wrong i will tell u.
and one more thing how to enable SuperCharger script and 9 lockscreen in ur rom????????

Good job
vivekchamoli said:
Thanks for the feedback , G3mod 1.9 performance is already there in the ROM No need to install install it separately . Yup its a bug which I'm working on ...and will release the update for the same soon.
Click to expand...
Click to collapse
To clarify, I have already installed G3MOD 1.9, I used your ROM img
I confirm this bug
http://forum.xda-developers.com/showpost.php?p=17939355&postcount=37
I use Google Translator

zvonac99 said:
To clarify, I have already installed G3MOD 1.9, I used your ROM img
I confirm this bug
http://forum.xda-developers.com/showpost.php?p=17939355&postcount=37
I use Google Translator
Click to expand...
Click to collapse
Thanks Zvonac,
I had worked this weekend over the framework and I'll be Uploading it shortly. All issue reported till now has been resolved in it. ( Version 2.0 )
Cheers.

zvonac99 said:
Apologize and for my bad English
I installed G3MOD 1.9 and your ROM v1.1 after a few days of use I noticed that you do not show the battery status properly, whether it's a bug, or are not using the battery 1% mod
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
Hi Zvonac99,
The issue is fixed in the New release i.e V 2.0 .
Check it out .
If you facing any other issue do let me know
Thanks
Cheers.

surtinira said:
thxx for give me ans
i have done all and in Titanium backup show app2sd partition like in up ur image but its ok
today i m flash ur rom 1.1 agine and folow ur instuction if someting wrong i will tell u.
and one more thing how to enable SuperCharger script and 9 lockscreen in ur rom????????
Click to expand...
Click to collapse
Hi in version 2.0 , 9 lock-screens are added as well as if you want to add supercharger script simply copy the script to /system/etc/init.d/ and then either using adb or terminal within the phone browse to the mentioned location above and then type sh
superchargerscriptname , and follow steps .
all issue reported are fixed now.

vivekchamoli said:
Hi in version 2.0 , 9 lock-screens are added as well as if you want to add supercharger script simply copy the script to /system/etc/init.d/ and then either using adb or terminal within the phone browse to the mentioned location above and then type sh
superchargerscriptname , and follow steps .
all issue reported are fixed now.
Click to expand...
Click to collapse
thankxxxx ur rom is very clean and i have done update vivek v2 and its fix font problem,some bug,speed then 1.1,new notification bar and most positive part is without any reboot ,bug its going smooth and my battery lift is only use 30% after use all day play game,send file,play videos,use internet thru wifi.
thank u very much for great rom

Bro swype is not working it says install update for further use of it.I really wanted it.It's awesome and update not available in market damn!!! I am from pune btw nice rom !!!

vishal8492 said:
Bro swype is not working it says install update for further use of it.I really wanted it.It's awesome and update not available in market damn!!! I am from pune btw nice rom !!!
Click to expand...
Click to collapse
Hi vishal, thanks , yup i have checked that and will update swype by Mid night today.
Sent from my GT-I5800 using XDA App

surtinira said:
thankxxxx ur rom is very clean and i have done update vivek v2 and its fix font problem,some bug,speed then 1.1,new notification bar and most positive part is without any reboot ,bug its going smooth and my battery lift is only use 30% after use all day play game,send file,play videos,use internet thru wifi.
thank u very much for great rom
Click to expand...
Click to collapse
Thanx a lot Surtinira for the testing and being so active to report bugs
Cheers.
Sent from my GT-I5800 using XDA App

Hey can you also look into adding shuffle all option to samsung stock music player and as well delete option in menu while playing song.That would be really great for me as I like default player but missing this.

Hi, thanks for the rom. So far the best I've tried. I have a small problem. After updating from 1.1 to 2.0, can not connect to Kies. This use to backup contacts.

Nery070 said:
Hi, thanks for the rom. So far the best I've tried. I have a small problem. After updating from 1.1 to 2.0, can not connect to Kies. This use to backup contacts.
Click to expand...
Click to collapse
Hi , kies issue is going with all the ROMS ( its basically driver isssue which normally gets fixed by un-installing and installing Driver from Kies --> tool menu) way to resolve this issue is to download "SMS and Contact Backup " app from markrt and backup all the contacts and sms as well . and later you can restore the backup from the sdcard and also from sdcard you can take the contact backup .

vishal8492 said:
Hey can you also look into adding shuffle all option to samsung stock music player and as well delete option in menu while playing song.That would be really great for me as I like default player but missing this.
Click to expand...
Click to collapse
Hi ,
thanks for the suggestion , if you want to hv that feature you can install honeycomb 3.0 music player.
This will require a bit of coding to be done , which will consume lots of time and now a days I'm a bit busy with work . I will try to make these changes over it later

Best ROM I ever tried..!!!
This is straight up the best ROM i came across....simple, clean & fast.....and battery life AMAZING!!!!!
Performance?????........very very good!!!
I was able to successfully update to 2.0 from my stock ROM that i reverted to, because the previous ROM i was using wasn't stable at all.
Very good installation tutorial as well!!!!
however.. i found sum bugs,,which isn't really of issue....but could make your ROM flawless!!
1) Maps don't work, as well as Places app... i keep getting a no network error every time i try connecting!!..& sometimes it just keeps loading...and loading...& loading..... doesn't stop loading actually!!!
2) Call end tone doesn't work.... whenever a call ends you aren't notified by the tone... I kinda like knowing when the call ends!!
Like i said its not much of a problem, but thats the errors i found so far..!
Thanks again 7 keep up the excellent JOB!!!!!

Please help. What can I do for a greater battery life?? Compared to other ROM (Indroid) half. I would like to keep Vivek ROM is really cool, but this bothers me and it's pretty fundamental problem. : Zmatený:

Related

Official ICS 4.0.3 B928 Final + B927 Final CWM Update!

Changelog Final Full B928 ICS Baseband :
Added ICS baseband 404029!
https://docs.google.com/file/d/0B_kPUrNkk3T0QzdFMF82S3N4TE0/edit
Changelog Final B928 :
Fixed cust mount
Fixed operators search
http://narod.ru/disk/59067673001.f141d7d2b078e3f1e1299c0c8522a21f/U8800proB928CWMStockFinal.zip.html
Changelog Test1 B928 :
Fixed low in-call volume.
Rooted.
Nex (final) version: add operators search + add cust mount.
http://narod.ru/disk/59028952001.a9e8740afb149085a05f442fd4849521/U8800proB928CWMStockTest1.zip.html
Changelog Final B927:
Added up-to-date versions of google aplications.
Fixed in-call low sound issue.
Changelog v2 B927:
First boot in english language
Added all stock data/dataapp/ aplications to data/app/ (of course with FMRadio).
Added up-to-date versions of google aplications and Superuser.
No Tweaks no MODs, only rooted.
Changelog v1.1 B927:
Rooted
No Setup Wizard
How To Install:
You must be on 2.3 based ROM and have CWM 5.0.2.7 then:
1: You need to flash Step1 from official B926 for bigger system partition capacity,. If you already have biger system partition, you don't need to do this step.
you can download it here:
http://www.mediafire.com/?u9mvoxjf4lmlu8p
I flashed this UPDATE.APP from CM7.2 SdCard/dload/UPDATE.APP, wihtout battery and Vol+ Vol- POWER. I think that there is lots of ways to do that
2. Download ROM
3. Put it to external SD card and do it as allways, advanced>reboot recovery>wipe data/cache/dalvik cache>Instal ZIP from SD card>Choose zip with ROM's name
THE IMPORTANT INFO FOR ALL!!!
If you want to go back to GB Baseband (404020) having ROM you should flash it in CWM exactly after flashing ROM with GingerBreads Baseband!! If you will not do that, you will have no network connection!!!
https://docs.google.com/file/d/0B_kPUrNkk3T0QmRkTld5SFh5Vm8/edit
If someone want a ICS Baseband (404029) flashable via CWM it's here:
https://docs.google.com/file/d/0B_kPUrNkk3T0TzFsMzZoMjg0QlU/edit
Important information for ROM customizers
Write in you're posts how to go back to GB Baseband (404020).
Thank you!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SemiLite B927 For those who can't repartition system
Changelog:
Removed some Huawey apps
Lots of apps moved to data/app/ to free system partition
How To Install:
You must be on 2.3 based ROM
Put it to external SD card and do it as allways, advanced>reboot recovery>wipe data/cache/dalvik cache>Instal ZIP from SD card>Choose U8800proB927CWMStockSemiLite2.3Partition.zip
Link for download:
Final B927:
http://narod.ru/disk/58370604001.93...927CWMStockFinalSemiLite2.3Partition.zip.html
V2 B927:
http://narod.ru/disk/57810470001.ea...roB927CWMStockV2SemiLite2.3Partition.zip.html
I Cant test this version becouse I already have bigger system partition size.
Be welcome to share you're opinion abaut this release.
Lite version maded by marsilinio
No mods, no tweaks just removed lots unnecesary aplications. If you miss something you can allways download them from the google play.
Final B927
http://narod.ru/disk/58509050001.10...marsilinio U8800proB927CWMStockFinal.zip.html
V2 B927
http://forum.xda-developers.com/showthread.php?p=29307403
Big THANKS to giris for showing the right way, NForce25 for patience, Faith1ezz and marsilinio for community and sharing their knowledge!
WiFi TX Power enabler
http://forum.xda-developers.com/showpost.php?p=29395662&postcount=58
Averybody can make customs by taking them as base.
Please, don't forget about link to the source (original post)
Thank you!
Nice and long-awaited work! :good:
Great work keep it up
Sent from my U8800PRO using Tapatalk 2
that's great
i am also trying to make a rom based on B927.....can you explain me what you have done to make it working with old baseband? (simply because i don't have enough time to flash the rom a hundred times to test it )
IMEI Backup: 5iromtoolbox
matteof93 said:
that's great
i am also trying to make a rom based on B927.....can you explain me what you have done to make it working with old baseband? (simply because i don't have enough time to flash the rom a hundred times to test it )
Click to expand...
Click to collapse
I guess with 5iromtoolbox: :http://forum.xda-developers.com/showthread.php?t=1591997
Awesome post!
Wifi Not Working
The Wifi is not working. When I turn On, automatically turn Off. Any idea?
iceman2029 said:
The Wifi is not working. When I turn On, automatically turn Off. Any idea?
Click to expand...
Click to collapse
did you install 2.3 step1 before flashing this rom?
iceman2029 said:
The Wifi is not working. When I turn On, automatically turn Off. Any idea?
Click to expand...
Click to collapse
Installed not like in 1st post described. Wi-fi works fine, now updating soft from google play via wi-fi.
Do all exactly as in instrucion! You need biger system partition! That should be done by flashing step1 from b926 rom. Link is in instruction for repartition.
Sent from my ragelis
How make a bigger System partition?
bronxitas said:
Do all exactly as in instrucion! You need biger system partition! That should be done by flashing step1 from b926 rom. Link is in instruction for repartition.
Sent from my ragelis
Click to expand...
Click to collapse
I can't complete the Step 1, always say "Update Failed", and I tried all the ways.
Please, you know another way to extend my system Partition?:crying:
Ok soo,in my case->downgrade from ics to gb or just flash the step 1 in vol+- and pwr and then the b927 in cwm
No way for the U8800-51 (Entel Chile) !
mm231982 said:
Ok soo,in my case->downgrade from ics to gb or just flash the step 1 in vol+- and pwr and then the b927 in cwm
Click to expand...
Click to collapse
Yes, that is the correct way, however, my phone is a U8800-51 and I can't use the method DLOAD (vol + - and pwr), always say "Update Failed" (I tried for 5 hours many methods, "return To froyo", "Go to GB" "Huawei European Rom", etc). Must be because it verifies the model and mine is not a U8800Pro, then it fails.
So wondering if there is another way to enlarge my system partition.
Thanks
P.D: For now, Aurora 4 is working excellent, but, I really, really wants this ROM, for the FM Radio!
Tomorow i realese fixed version with fm radio, updated system apps and first boot language eng.
Iceman2029: just wait for lite version.
Sent from my ragelis
iceman2029 said:
Yes, that is the correct way, however, my phone is a U8800-51 and I can't use the method DLOAD (vol + - and pwr), always say "Update Failed" (I tried for 5 hours many methods, "return To froyo", "Go to GB" "Huawei European Rom", etc). Must be because it verifies the model and mine is not a U8800Pro, then it fails.
So wondering if there is another way to enlarge my system partition.
Thanks
P.D: For now, Aurora 4 is working excellent, but, I really, really wants this ROM, for the FM Radio!
Click to expand...
Click to collapse
there is no way to enlarge your system partition I think but you can do what I did to get it working.
just open the .zip file and delete the whole data folder + every app you are not gonna use in system/app (carefull not to delete something important)
Moihack said:
there is no way to enlarge your system partition I think but you can do what I did to get it working.
just open the .zip file and delete the whole data folder + every app you are not gonna use in system/app (carefull not to delete something important)
Click to expand...
Click to collapse
Thanks, let me try.
BTW, I used this post from Geno.Kolar: http://www.modaco.com/topic/341374-custom-you-data-partitions-size/, and now I have supposedly enlarged my system partition, but still I don't have Wifi.
iceman2029 said:
BTW, I used this post from Geno.Kolar: http://www.modaco.com/topic/341374-custom-you-data-partitions-size/, and now I have supposedly enlarged my system partition, but still I don't have Wifi.
Click to expand...
Click to collapse
you have to reflash the rom. if the system partition is not big to fit the whole rom, wifi foler + xbin folder are not copied correctly resulting in non-working wifi & improper root
i have a question?
mm231982 said:
Ok soo,in my case->downgrade from ics to gb or just flash the step 1 in vol+- and pwr and then the b927 in cwm
Click to expand...
Click to collapse
How to downgrade from ics to gb, i have Aurora_4.1_4.0.4_fixed in U8800_51?
Thanks
Aurora based on 2.3 thats why you don't need to downgrade ics is the meaning of official b927 or b926 ROM's.
Today here will be lite version of stock ROM whitch will not need repartitioning.
Sent from my ragelis
Updated first post with v2 version and changelog. I think this is the Final verion of full stock.
Semi Lite version uploading - with posibility to flash on GB system partition size and removed some Huawey apps, other one moved to data/app/.
Lite version will be this evening by marsilinio.

(MOD)(BL1.2ROM-CM-10)SmOoTher_BeAn_4.1.2(G-tablet)(Updated 02/01/13)

Just when you thought it couldn't get any Better. Then I give you Greatness​
Disclaimer
I do not take responsibility for anything that happens to your stuff
If you load this it is your responsibility to fix it if things go wrong
While Running this ROM you think "WOW this is just Fantastic" then Your Welcome
If your device runs away and gets Married to a Rock Star
then all I got to say is sorry that it is soooo SmOoTh :cyclops:
If you want to repost this onto another site
Please ask Permission to do so
or just post the link back to here
THANK YOU
For starters I am not a Developer, I am just a normal Guy with a Linux Machine and a Dream.
Special thanks goes towards fosser2, the DRH team and redeyedjedi. Without them I wouldn't of been
able to do any of this.
The new SmoOth is using CM-10 4.1.2 base built from source by redeyedjedi with a nice
face lift and some extras. It is desighned to create for you a great gaming experience as well as everyday use.
Let me introduce you to the New SmoOther Creation.
ScreenShot​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshots on the Inverted Version​Because that is how I ROLL​
I will only Support my Installation Instructions
I have tested it with my own G-Tablet with these
exact instructions.
Installation Instruction.
You will need to be on BL 1.2 and have a 250m system partition (recomended).
(You can run this on a 350m system setup)
You must know how to back up your existing system. That is only being said once
Boot into Recovery and do a Nandroid Backup Wipe data/factory reset,
go into "mounts and storage" and "mount & format system"
Partition Internal SD to 4096/0 in Advance settings (if already skip this part)
Download Rom and Place onto internal storage
Install Rom
Reboot into system, Complete initial setup
AND HOLD ON TIGHT
DIRTY FLASHING WILL NOT BE ALLOWED. YOUR MOM SHOULD OF TAUGHT YOU HOW TO WIPE
This ROM is bare bone striped down the apps and replaced with lighter counter parts.
The only addition I included is minimum Gapps some choice addons and Rom ToolBox to OC, change I/O schedulars
and other adjustments you would like to make. (Recomended Memory Manager Preset setting= Strict)
Check apply on boot then apply settings. Perfomance settings still need to be worked out within the ROM for I/O settings.
Also for Task Killing without a app go to system settings/Developer options (Turn on first)
then select "Background process limit" to (No background processes or Limit to 1)
Whats included
1 % Battery Mod (Fixed and Works)
Latest Apex Launcher
Play Store (Inverted or Standard depends on ROM Choice)
AdAway app
Apollo (Inverted or Standard depends on ROM Choice)
Pandora (Inverted ver.4.1)
Google Now
Chrome Browser
CPU Sleeper
DSP Manager
Gmail (Unreleased ver.4.2, Inverted or Standard depends on ROM Choice)
ROM ToolBox
SuperSU
TIBU
XDA app
YouTube (ver. 4.2.16)
What Works
Audio, Audio, and did I mention Audio...... :victory:
What Doesn't Work
Camera (Work around use USB Camera)
Mic works but buggy
ROM download here.
SmoOth Bean 4.1.2 ver 1.5.2(Standard) 160 DPI
The Goods
SmoOth Bean 4.1.2 ver 1.5.2(Inverted) 160 DPI
The Goods
Changelog​
Fixed .apk HTML files for both battery mod and mouse pointer
Added some extra build.prop tweaks
Deleted unneeded tweaks that caused issues with ADB (Thanks rajeevvp for letting me know about it.)
Added Google Now for those who want to try to get it to work (Its a Data app so you can delete it if nessesary).​
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------​
Link for NVFlash package to set System to 250m
Recomended NVFlash 250m system Mod
Older Updates
SmoOth Bean 4.1.2 ver 1.5(Standard PlayStore) 160 DPI
The Goods
SmoOth Bean 4.1.2 ver 1.5(Inverted PlayStore) 160 DPI
The Goods
I don't normally do this stuff, So I will try to keep it updated as much as I can. Switch to Dev Host and they seem to be holding Strong. People willing to Mirror me a link PM me with it and I will add it with who is providing it. Thanks.
If you like my work just press the Thanks button also
go find fosser2, redeyedjedi and any of the DRH Team and thank them as well
Please by all means if you have any private questions or cannot post in the Development treads PM me. Please don't Email someone that you just met. I am not that kind of person to respond to emails so Please Keep it in the Forum. Thanks in Advance.
REMEMBER that this is FREE! I have NOT and WILL NOT ask for donations for any of this! If you wish to I will add it to my Wifes Kiddle fund so I can keep working on this.!
Reserved
System App Addons. An Extra 7.6 MB on the System
SystemApps.zip
Installation instructions.
Download the Addon pack onto PC and unzip using 7zip. Choose which ones you want to have added and delete the ones you don't want in system/app folder. Compress back into a zip file and transfer onto internal storage through recovery. Wipe Cache and Dalvic Cache then install update and reboot. After device has rebooted go into Settings/Accounts and turn the Sync on on the ones you want to Sync.
Previous Build
SmOoTh BeAn ver.1.3.2
SmOoTh BeAn 1.3.2 (160dpi)
1.3.2 Updates
160 DPI Update
120 DPI Update
SmOoTh BeAn ver.1.2
Click Here
How do I check version of BL (assumed to be boot loader)?
Thanks
redhonker said:
How do I check version of BL (assumed to be boot loader)?
Thanks
Click to expand...
Click to collapse
Its not just the boot loader that is needed it is the expanded system partition that is also. Your best bet is to NVFlash the package in the OP. Not only will it set your device into the 1.2bl but it will expand your system partition so it can load the updated firmware.
So who's tried this out and how did it work?
z00mantwo said:
So who's tried this out and how did it work?
Click to expand...
Click to collapse
FYI If it doesn't run right I don't launch it. I am currently running it on my personal G-tablet and it is nothing but butta.
This is by far the smoothest this tabet has EVER BEEN. I I mean super fast. I wow.
On another note, things seam really big.. Can we resize this?
Sent from my Malata SMBA1002 using xda app-developers app
i get stuck in bootloop on the 3 birds screen.
anyone else facing the same problem?
I can't believe it's butter
junooni said:
i get stuck in bootloop on the 3 birds screen.
anyone else facing the same problem?
Click to expand...
Click to collapse
No issues here. It worked perfectly the first time. I had already nvflashed the linked file, so I re-formatted the internal sdcard per the instructions then flashed the ROM.
nobe1976, you are a magician. THANK YOU.
My tablet performs very well now, with an occasional hiccup. It sometimes becomes unresponsive temporarily when I'm doing a lot. For example, from the Play Store, I had about 5 apps queued up to download/install. While that was going, it would go unresponsive for sometimes 10-15 seconds.
JEZZEJAMEZ said:
This is by far the smoothest this tabet has EVER BEEN. I I mean super fast. I wow.
On another note, things seam really big.. Can we resize this?
Sent from my Malata SMBA1002 using xda app-developers app
Click to expand...
Click to collapse
Do you have one of those tablet that refuse to boot up ICS or JB on BL 1.2?
---------- Post added at 06:08 PM ---------- Previous post was at 06:06 PM ----------
JEZZEJAMEZ said:
This is by far the smoothest this tabet has EVER BEEN. I I mean super fast. I wow.
On another note, things seam really big.. Can we resize this?
Sent from my Malata SMBA1002 using xda app-developers app
Click to expand...
Click to collapse
Use root explorer or similar app and change the lcd density in /system/build.prop from 160 to 120 and reboot.
JEZZEJAMEZ said:
This is by far the smoothest this tabet has EVER BEEN. I I mean super fast. I wow.
On another note, things seam really big.. Can we resize this?
Sent from my Malata SMBA1002 using xda app-developers app
Click to expand...
Click to collapse
To resize just open ES Explorer and give it Root permmisions and change in the build.prop the ro.sf.lcd_density=160 to 120 then reboot. No need to add Root Explore when ES will do everything and more without adds.
Updated OP with a 120 density version.
junooni said:
i get stuck in bootloop on the 3 birds screen.
anyone else facing the same problem?
Click to expand...
Click to collapse
Are you absolutely certain that you are on BL 1.2 with a system partition of 250m. I would like to try to get everyone on board with this let me know and I will see what I can do to assist.
Randy Power said:
No issues here. It worked perfectly the first time. I had already nvflashed the linked file, so I re-formatted the internal sdcard per the instructions then flashed the ROM.
nobe1976, you are a magician. THANK YOU.
My tablet performs very well now, with an occasional hiccup. It sometimes becomes unresponsive temporarily when I'm doing a lot. For example, from the Play Store, I had about 5 apps queued up to download/install. While that was going, it would go unresponsive for sometimes 10-15 seconds.
Click to expand...
Click to collapse
Reboot it will only get better.
All I can say is WOW! Fantastic ROM. The only hiccup I had was that I got an "unable to reach server" error in Google Play. I did the old market fix from the froyo days and that did the trick. Thanks much.
tsukaza said:
Do you have one of those tablet that refuse to boot up ICS or JB on BL 1.2?
---------- Post added at 06:08 PM ---------- Previous post was at 06:06 PM ----------
Use root explorer or similar app and change the lcd density in /system/build.prop from 160 to 120 and reboot.
Click to expand...
Click to collapse
Thanks. Problem solved
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
I keep getting stuck on the 3 birds loop. the 3 birds appear, then the screen goes blank for a couple of seconds and then the birds reappear. this happens a couple of times then it gets stuck on the birds.
i had the same issue on all ICS roms as well. Flashback HC rom works flawless every time so i have to revert back to it.
Please suggest a solution. i'd love to try out JB on my tab.
junooni said:
I keep getting stuck on the 3 birds loop. the 3 birds appear, then the screen goes blank for a couple of seconds and then the birds reappear. this happens a couple of times then it gets stuck on the birds.
i had the same issue on all ICS roms as well. Flashback HC rom works flawless every time so i have to revert back to it.
Please suggest a solution. i'd love to try out JB on my tab.
Click to expand...
Click to collapse
Give me the day and I will pm you with something to try out that has gotten me out of a jam a time or two. Have work today and won't have any computer time till later this afternoon.
Possible Bug Report: On my tab, the sound will not switch to my BT headphones. They paired correctly, and I have performed multiple iterations of rebooting, switching BT on/off, etc...no success thus far.
Any help or suggestions are appreciated. Otherwise, this is a thing of beauty.
dsrhokie said:
Possible Bug Report: On my tab, the sound will not switch to my BT headphones. They paired correctly, and I have performed multiple iterations of rebooting, switching BT on/off, etc...no success thus far.
Any help or suggestions are appreciated. Otherwise, this is a thing of beauty.
Click to expand...
Click to collapse
If this is based on the Team DRH Dirty Bean - it doesn't work there either. Last time I saw this issue was when the "phone" apps were not installed as part of the selected apps on ICS - it pairs but no BT audio.
dsrhokie said:
Possible Bug Report: On my tab, the sound will not switch to my BT headphones. They paired correctly, and I have performed multiple iterations of rebooting, switching BT on/off, etc...no success thus far.
Any help or suggestions are appreciated. Otherwise, this is a thing of beauty.
Click to expand...
Click to collapse
Ill mess around with the bluethooth to see what I can get when I get home. Thanks for the heads up.

MysticMoD ™ v2 Custom MoD with Timescape UI Xperia™ style for Karbonn A9

Hi Folks!!!
Finally My MysticMod™ v2 is out here live for you guys to try.
MysticMod™ v2 feature
Full Timescape UI
Sony backup and restore
Bravia Engine
XLoud music
Walkman(My own port)
Sony Contacts app
Sony Messaging app
Sony launcher
Sony Widgets full support including photo frame
Smooth
Power tweaks and boots
Super fast Rom
much more!!!!
PLZ DONOT REPORT KNOWN BUGS
Disclamer:
Quote:
By flashing this rom you take full responsibility of your actions. Neither I nor XDA will be held responsible for anything. I will not be responsibe if your phone is dead or your sd card is dead or your phone just burned up.
Instructions to install
Quote:
[#] Make a Nandroid Backup
[#] Wipe Data/Factory Reset
[#] Wipe Dalvik Cache
[#] Install Rom and Reboot
Method to take current ROM
1 Reboot into recovery, by pressing and holding power+volumeup key, till u see a red screen
2 select the option back up and restore
3 select backup
Now u have a back up of your current ROM!!!!
Download the files including the attachment and place in the Root of your SD card, that is, do not place it in any folder but keep the file just on your SDcard.
Method to Flash my MysticMoD
1 Reboot to recovery
2 wipe cache partition
3 Wipe format/factory reset data
4 Flash zip from SD card
5 choose zip file
6 Select MysticMOD from your ex SD card
7 select MysticMoDSony.zip and flash it over the beta2, the zip file is ho the attachment.
Voila!!!!
MysticMoD v2 is now all yours on your Lovely A9
DownLoad link
http://www.mediafire.com/?r393d9zdz1q7dq3
Screenshots Coming Soon!!!
Known Bugs
contacts
vanish yen phone reboot,
solution: have to make a back up to sd card and also use Sony back up and restore app to take back up
messaging app force closes when going to settings, and u can use ly 1st sim to send sms.
solution: can get the default messaging app replaced.
plz do not report these bugs, as can't manage to fix this even after 2weeks of continues research and programming!!!
for ppl who wants default messaging app flash this!!!
http://www.mediafire.com/?jk3m75nkqvzo7zz
criedt
prratha93
For ppl who wants default messaging app flash this!!!
http://www.mediafire.com/?jk3m75nkqvzo7zz
Credit
prratha93
This is to inform you guys that the ROM I have uploaded is the beta 2 version, and final version patch would be released today, 'm sorry error regretted, it was an error while uploading selected a wrong file, I will just release the final patch so dat u can flash it on this ROM 'm sorry about it
Edit
Attachment uploaded check 1st post
ausome
nxt plz add one file browser in rom :good:
HERE ARE SCREEN SHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
great work
i think this is best rom i ever have
Hi zeyan,
Good Work.. Karbonn A11 phone specs is similar to Karbonn A9. & it comes with Android 4.0. Can we port this to Karbonn A9?
Please....
hoping to see the mysticmod v3 touchviz ui soon......!!!
Waiting for next mysticmod v3
kewlest22 said:
hoping to see the mysticmod v3 touchviz ui soon......!!!
Click to expand...
Click to collapse
Please release next version bro
mysticmod v3 releasing or no??? its more than a month now....!!!
Moaning never pays out well, enjoy what you already have
All devs and researchers who are willing to Get our A9 an ICS upgrade plz come and discuss here....this is important plz help A9 users to get the best wat they deserve....
Thread:http://forum.xda-developers.com/showthread.php?t=2065533
Sent from my A9 using Tapatalk 2
Hi
zeyaan said:
Hi Folks!!!
Finally My MysticMod™ v2 is out here live for you guys to try.
MysticMod™ v2 feature
Full Timescape UI
Sony backup and restore
Bravia Engine
XLoud music
Walkman(My own port)
Sony Contacts app
Sony Messaging app
Sony launcher
Sony Widgets full support including photo frame
Smooth
Power tweaks and boots
Super fast Rom
much more!!!!
PLZ DONOT REPORT KNOWN BUGS
Disclamer:
Quote:
By flashing this rom you take full responsibility of your actions. Neither I nor XDA will be held responsible for anything. I will not be responsibe if your phone is dead or your sd card is dead or your phone just burned up.
Instructions to install
Quote:
[#] Make a Nandroid Backup
[#] Wipe Data/Factory Reset
[#] Wipe Dalvik Cache
[#] Install Rom and Reboot
Method to take current ROM
1 Reboot into recovery, by pressing and holding power+volumeup key, till u see a red screen
2 select the option back up and restore
3 select backup
Now u have a back up of your current ROM!!!!
Download the files including the attachment and place in the Root of your SD card, that is, do not place it in any folder but keep the file just on your SDcard.
Method to Flash my MysticMoD
1 Reboot to recovery
2 wipe cache partition
3 Wipe format/factory reset data
4 Flash zip from SD card
5 choose zip file
6 Select MysticMOD from your ex SD card
7 select MysticMoDSony.zip and flash it over the beta2, the zip file is ho the attachment.
Voila!!!!
MysticMoD v2 is now all yours on your Lovely A9
DownLoad link
http://www.mediafire.com/?r393d9zdz1q7dq3
Screenshots Coming Soon!!!
Known Bugs
contacts
vanish yen phone reboot,
solution: have to make a back up to sd card and also use Sony back up and restore app to take back up
messaging app force closes when going to settings, and u can use ly 1st sim to send sms.
solution: can get the default messaging app replaced.
plz do not report these bugs, as can't manage to fix this even after 2weeks of continues research and programming!!!
for ppl who wants default messaging app flash this!!!
http://www.mediafire.com/?jk3m75nkqvzo7zz
criedt
prratha93
Click to expand...
Click to collapse
Hi,
Can you please repost the link of downloading mysticmodV2 with beta2? I was not able to access any of the zip files except the one attached in this forum and after flashing that SonyMysticModv2.zip only my status bar and wallpaper got changed and the animations have become bautiful.
Please let me know the links to download the proper update file. I am eagerly waiting to try your ROM. It looks lovely :good:
hey the links are working. i checked on my friends laptop my internet has mediafire blocked seems
Sent from my A9 using xda app-developers app
Hi zeeyan any update regarding any new mod created by you for A9 i love ur mysticmod v2 its simply awesome
Sent from my A9 using xda app-developers app
jhalife said:
Hi zeeyan any update regarding any new mod created by you for A9 i love ur mysticmod v2 its simply awesome
Sent from my A9 using xda app-developers app
Click to expand...
Click to collapse
thanks for all your Love and support,but since I moved away from karbonn a9 and don't have the device I 'm no more working on mysticmod touchwiz.
its a sad announcement I understand Your expectations but It's really unfortunate.
sorry
sad news we lost one developer anywaya zeeyan ur wrk r really awesome
Zeeyan i needed ur 1 help ya. I wanted to replace framework-res.apk i created a theme with UOT kitchen but i am unable to flash it using our CWM. i get installation aborted message.
once i had tried replacing by jst cut paste but i hd encounttered boot loops dn i hd to flash update.zip.
It would be very kind of you if you can let me know how to create a flashable zip file to replace the framewrk apk.
waiting for your response
Sent from my A9 using xda app-developers app
hey zeeyan my wrk is done. i was able to create flashabke zip possibly m on a pth to become A9 dev.
Sent from my A9 using xda app-developers app
jhalife said:
hey zeeyan my wrk is done. i was able to create flashabke zip possibly m on a pth to become A9 dev.
Sent from my A9 using xda app-developers app
Click to expand...
Click to collapse
good to know that u can theme as many zip files as u wish and post on my thread so that other users use it too

Q&A/T thread for "Resurrection [MAG/cLK][NATIVESD][DATAOnExt] MIUI"

[SIZE=+3]This thread has been created strictly for
Questions & Troubleshooting[/SIZE]
[SIZE=+2]Specific for "Resurrection [MAG/cLK][NATIVESD][DATAOnExt] MIUI"[/SIZE]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
[SIZE=+2]This thread has been created for people to share issues, questions and help
while using this version of "Resurrection [MAG/cLK][NATIVESD][DATAOnExt] MIUI"​[/SIZE]
Resurrection [MAG/cLK][NATIVESD][DATAOnExt] MIUI
[PLEASE make sure to thank developer for the dedication to this ROM
Please do not clutter the Development thread with non development-related chatter
See post two for FAQ​
FAQ​
Q Why a special Q&T Thread for a specific ROM??
A The bigger a ROM development thread gets, the greater the chance that posts are being placed in this thread that are not related to the ROM development itself, e.g. problems with flashing, installation, bugs, things not working etc. However this is understandable, it's not according to the guidelines of XDA for Development sections. Therefore the main goals of the ROM specific Q&T threads is to avoid this cluttering of the original develpment thread with these OT posts by redirecting the posters to the ROM specific Q&T thread and also to relieve the developer from answering these post, so he can dedicate his time to developing.
Q How to move my post to the Q&A/T thread?
A Copy the text of your post in the dev's thread, got to the Q&A/T thread and paste it there. After having done that, go back to the dev's thread, edit your post and change the text into: moved to Q&A/T thread, preferably accompanied with a link to this thread.
Q When I'm asked to move my post to the Q#A/T thread, do I have to do that?
A When you're asked to move your post, there will always be given an explanation by the OP of the Q&A/T, e.g. your post is not development related (f.i. SD card problems, etc), so please be so kind to move your post. If you want to help the dev to keep his original thread as clean as possible from OT posts, then the answer is, of course, YES. Although we cannot force you to move your post, it's highly recommended to do so
Q Where can I download this ROM and How do I install?
A You can find the link to download and installation instructions HERE.. Pay close attention to this post, everything required for a successful flash is listed right here. If you fail to follow the instructions or meet the requirements for installation, you could run into some problems.
Q How’s battery life?
A see this question asked repeatedly across all ROMS. Honestly there is no way to give you an answer based on a ROM. There are too many variables in question and results vary from user to user and device to device. Battery life is going to depend on age and condition of your battery, your use habits with your device, installed apps, tweaks, settings, etc...
Q How do I...
A Ask your questions and report your issues in this thread. You will receive a response and hopefully get you back up and running this ROM to it's fullest
Nice job, thank team of RC's!
Welcome every MIUI Flashaholics!
Place your Q&A Troubleshooting here so as keep the main thread clean! Thank you!
THANHVO31 said:
Nice job, thank team of RC's!
Welcome every MIUI Flashaholics!
Place your Q&A Troubleshooting here so as keep the main thread clean! Thank you!
Click to expand...
Click to collapse
Hi my friend,
would you also be so kind to post this message at the end of your thread???
In addition to THAN's post:
This thread has been created, in accordance with the owner of the original development thread, to keep his thread clean from Off Topic, e.g. non-development related, posts.What are OT posts? Examples:
1. I want to install this ROM, how to do that?? This is a question you can find in the first post of the thread.
2. I want to use a specific app with this ROM, will this work with it. Not development related., etc . etc.
3. Posts about WiFi/BT that are working for you, while others have no problems with that.
4. SD Card related problems, etc
very best regards, Kuzibri
NativeSD Random Freeze - SOLVED.
NativeSD Random Freeze - SOLVED.
Quote:
Originally Posted by runuts View Post
I recently switched from NAND to Native SD on a T-Mobild (1024 MB) HD2. The ROM and apps are just too big to be used with everything on NAND. Not a complaint, just an observation.
Clean install to a a SanDisk Ultra® microSDXC™ UHS-1, 64 GB Set the EXT4 partition to 4 GB. Install seems to go fine and after first boot, the phone runs fine; however, I am experiencing random freezes during the day that require removing the battery. Running a second phone using a Samsung 32 GB, Class 10 and NexusHD2-JellyBean-CM10.1 V2.1 on Native SD with no problem.
At this point, I'm not certain whether the issue is related to the SD card, the build, or an incompatible app running in the background. Last evening, I went through all of the apps on the phone, starting using, and then closing. None triggered the freeze. It seems to occur after the phone has gone to sleep. It just won't wake-up, requiring pulling the battery and restarting.
I had been running the prior releases on NAND without issue other than the aforementioned memory problems. Any comments, suggestions appreciated.
Over the weekend, I replaced the SanDisk Ultra® microSDXC™ UHS-1, 64GB card with a Samsung Pro Extreme Speed 64GB and reinstalled. So far, the problem appears to be solved and was related to the SanDisk Card. Performed a second installation using a Microcenter store brand 32 GB, Class 10 card and it too seems to be running flawlessly. The SanDisk cards are headed back to the store. I may simply have had a bad card, but wanted to share my experience.
[Q] How to add power key to sofykeys in MIUI roms after V3.3.13 & onforwards
Softkeys is great option for HTC HD2 as it has poor brittle key pad
MIUI roms gifted from you dear thanhvo31 (http://forum.xda-developers.com/show....php?t=1019092) are great & bieng regulary updated, but unfortunately the newly released roms havin miui V5 version dont have power key included in softkeys, i tried to search a method to add power key but no benefit
Tried this thread (http://forum.xda-developers.com/show....php?t=1407003) even but didnt work
thanhvo31 can you explain how to add powerkey, or plz post the versions having powerkey
Thanks
Need Help
Hi,
I really need some help to understand better the way of flashing this rom.
I may have been doing something wrong.
But first i need to say I LOVE MIUI ROM.
I have an HTC HD2 Leo (EU) 512MB
My SD Card is not of a good brand, it is 8gb class 6 card, that came with my first HTC HD. It has some years now.
I have installed this ROM via ClockMod 1.5 and created a FAT 32 and an EXT4 partition.
Everything runs excellant in the ROM, but after a few days, the phone starts to freez and in a point i start losing APPS.
It is really anoying to do it all again, all is backuped with Xiamomi Account and Google account, but it is really boring to put everything again on SD card, and flash it all over again.
Do you think it might be a problem with my SD Card?
Help is much apreciated.
I really want to use this ROM.
Thank you,
hollowprod said:
Hi,
I really need some help to understand better the way of flashing this rom.
I may have been doing something wrong.
But first i need to say I LOVE MIUI ROM.
I have an HTC HD2 Leo (EU) 512MB
My SD Card is not of a good brand, it is 8gb class 6 card, that came with my first HTC HD. It has some years now.
I have installed this ROM via ClockMod 1.5 and created a FAT 32 and an EXT4 partition.
Everything runs excellant in the ROM, but after a few days, the phone starts to freez and in a point i start losing APPS.
It is really anoying to do it all again, all is backuped with Xiamomi Account and Google account, but it is really boring to put everything again on SD card, and flash it all over again.
Do you think it might be a problem with my SD Card?
Help is much apreciated.
I really want to use this ROM.
Thank you,
Click to expand...
Click to collapse
Hi,
1. for installing instructions for this ROM see page 1 of this thread: http://forum.xda-developers.com/showthread.php?t=2255056
2. IMJO you should buy a new SD Card cause that might be the cause of your problem(s). When was the last time you formatted your SD Card? I format it every two weeks to prevent the Card is the cause of problems, like freezes, instability, battery drainage, etc.
kind regards, Kuzibri
Hi...
I ve quest ... about nand and native SD.
Im new to jb. Still me using miui GB.2.3.7
My quest is ... for jb install .. Rom partion 380 MB along with SD card 2 Gb extra partition..... ?
I could not understand jb install...do i needs more space ..
How to go about ....it?
Why Magdlr ? CLK not enough to install jb. ?
Plz explain ...
Sent from my HD2 using xda premium
selvag said:
Hi...
I ve quest ... about nand and native SD.
Im new to jb. Still me using miui GB.2.3.7
My quest is ... for jb install .. Rom partion 380 MB along with SD card 2 Gb extra partition..... ?
I could not understand jb install...do i needs more space ..
How to go about ....it?
Why Magdlr ? CLK not enough to install jb. ?
Plz explain ...
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
I see you have a lots of doubts ... Search one by one ..he he
Me figured out Some stuff ...to install..
planning these processes step by step
1. Using Hd2 tool kit
- wipe with task 29
2. Custom Partition with 380 MB
3. Install Clk.. recovery or extended twrp v2.5.03
4. Install Rom
Here I ve quest in 3rd step ... which one? I should install...
In 4th step do I need to select ext partition 2gb in sdcard or what...
I thing bit confused nand and native SD..
Guide me plz
Thanks
Sent from my HD2 using xda premium
selvag said:
Me figured out Some stuff ...to install..
planning these processes step by step
1. Using Hd2 tool kit
- wipe with task 29
2. Custom Partition with 380 MB
3. Install Clk.. recovery or extended twrp v2.5.03
4. Install Rom
Here I ve quest in 3rd step ... which one? I should install...
In 4th step do I need to select ext partition 2gb in sdcard or what...
I thing bit confused nand and native SD..
Guide me plz
Thanks
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
You need to search and read, these questions are not for development thread.
Sent from my HTC HD2 using Tapatalk 2
Hi! I have installed this ROM but it is very laggy. I did every step it was need:
-bootloader: MAGLDR
-system partition size: 400mb
-ext4 partition size:1GB
-method: dataonext
-yes,i flashed it properly
-yes i fixed permissions after first boot
Hi all,
Some days ago I bought a HD2 with Windows Mobile and today I managed to flash MIUI on it. Everything seems to work flawlessly except for the internet connection. No data (H in the status bar is displayed) and no Wifi connection (it gets stuck at "obtaining IP address"). But I can receive and make calls and the SIM card works in my Xperia Z (I use it with an µSIM -> SIM adapter, but this works in my G1 ).
So what do I do wrong? APN is also correct...
Thanks in advance,
Lunch
PS: I have already tried #7 out of this thread:
http://forum.xda-developers.com/showthread.php?p=10433749#post10433749 (7th)
And another SIM card shows exactly the same problem.
EDIT2: after this I flashed another ROM (NexusHD2) and all mobile data related issues are gone.
Lunchbox115 said:
Hi all,
Some days ago I bought a HD2 with Windows Mobile and today I managed to flash MIUI on it. Everything seems to work flawlessly except for the internet connection. No data (H in the status bar is displayed) and no Wifi connection (it gets stuck at "obtaining IP address"). But I can receive and make calls and the SIM card works in my Xperia Z (I use it with an µSIM -> SIM adapter, but this works in my G1 ).
So what do I do wrong? APN is also correct...
Thanks in advance,
Lunch
PS: I have already tried #7 out of this thread:
http://forum.xda-developers.com/showthread.php?p=10433749#post10433749 (7th)
And another SIM card shows exactly the same problem.
EDIT2: after this I flashed another ROM (NexusHD2) and all mobile data related issues are gone.
Click to expand...
Click to collapse
Hi Lunch,
I met the same problem with a certain Android ROM. What I did to solve it, is remove every WiFi connection it detected and added them again manually which gave me the possibilty to enter the key of the Router. After that WiFi worked without any probs. Maybe this will work for you too!!
kindest regards, Kuzibri
Thank you, maybe I'll try MIUI once again and I'll look through it.
Any answer for softkey power button
Refer to my previous post, Any answer for softkey power button???
cant boot this rom after instllation ( dataonext)
Hi
it is more than 3 days i am searching and flashing this rom, (almost 10 times) but what ever i do i stuck at loading screen (MI XIAOMI.com)
i followed this guide http://forum.xda-developers.com/show...5#post25781675
except i copied the chief guides from here (370 mb system and ...)
i have 512 hd2 and i installed this with these options
DataOnExt( i manually partitioned my sd with mini tool and created ext4 partition)
plz guide me
thanks
GPS problem and SOD on lock screen
I installed this rom (current ver 3.4.19) and all in all I think it is best HD2 Android ROM on JellyBean 4.1.2.
One problem exist since first 4.1.2 release of this rom (gtbluesky on miui.com). It is a GPS problem, that seems unsolved yet. It is difficult to search original forums on miui.com for solution, because of chinese, of which I dont understand any word.
Anyway, I'm sure that all freezes I have had are due to this particular gps isssue, because phone freezes with SOD only while in sleep (lock screen), and I think it is because one of the app (system or user) trying to get GPS data freezes the phone and lock screen is then locked for sure with famous black screen of death with only hard key's light on.
I came to this conclusion because I installed app "GPS status" from market and tried forceing gps just to test my phone GPS radio. After launching, app waited (as usual for gps apps depending on my location, satelites position, gps cacche etc) and finally when gps was captured with correct data, then freezed the phone leaving me with no other option but to reset the phone with pulling out the battery.
I repeated this several times and got freezed almost every time.
Google maps freezes phone also, as soon as location is fetched from satelites, not from AGPS.
If anyone noticed this, or had this same problem, please post some advice or solution how to fix this.
My HD2 is:
MIUI 3.4.19 with DataOnExt
bootloader: MAGLDR
recovery: cwm
memory: 512 (EU)
SYS partition: 370 MB
cache partition: 5MB
SD card : SanDisk 16Mb class 4
ext4 partition: 2048
Hey there guys. I recently installed this ROM and everything works fine, didn't have any major problems. The only thing that bothered me was the camera, as it was a bit buggy. So I then decieded to use the one from my Titanium Backup (from a previous rom installation). It worked just fine.
Yesterday I wanted to take a picture and the camera icon was gone. If anything both were gone, by that I mean that after the ROM install there were two camera icons (before the TB one). I retried to restore the one from TB, to no avail. I just wanna know what the problem is, or should I just install a camera from the Playstore? Thanks for a wonderful ROM!:good:
My Install details are as follows:
MIUI 3.5.3 with DataOnExt
Bootloader: MAGLDR
Recovery: CWM
Ext4 partition: 4GB
Swap size: 256mb
Memory: 512 (International)
SYS partition: 380 MB with 5mb cache
SD card: SanDisk 16GB Class 10

[ROM] CM7.2 MOD V1 for U8800Pro , the other sight of CM7 , based on Geno's CM7 port

Well , it's time to have some fun with cm7 ...
this is the other sight of CM7 .
is a modded CM7.2 rom , ported over geno's CM7 ports
Thank to genokolar for his great port and kernel
THIS ROM IS 2.3 BASED ROM , SO MUST BE ON GINGERBREAD BASEBAND TO FLASH IT.
Kernel sources from genokolar ... https://github.com/genokolar/android_device_huawei_u8800 ... https://github.com/genokolar/kernel_huawei
GREDITS
Genokolar
Bhupatib for ice10 theme
Changelog
rooted , unlock fps and blablabla........
a modern look of cm7
hdr enabled
new camera apk
new settings apk , with header titles like on ics
new media profiles.xml
modded framework.jar to increase volume steps and changes to scrolling cache
added sony bravia engine mod
build.prop and init.d tweaks
no need to flash gapps
i don't remember what else ...
CM7.2 MOD V1
Changelog
Great improvements , to sound and camera.
Mms apk, supporting 160 characters.
Patched systemui for transparency.
New modern look.
Bootanimation from cm10.
Changed some build.prop and init.d tweaks for the best performance , , responsiveness and speed.
Download , CM7.2 MOD V1 (10/06/2013).
http://www.mediafire.com/download/d8bi5bavzjmpjm3/CM7.2_MOD_V1.zip
Installation
get into recovery
wipe data , wipe cache , wipe dalvik , format system , install zip ...
TIP 1 , MOVE DALVIK TO SD EXT PARTITION TO SAVE MORE SPACE TO DATA ( INTERNAL MEMORY)
1. For moving dalvik cache to sd ext partition , you must partition your sd card through recovery.
So, go to recovery ..
Choose advanced and then partition sd card.
Then choose, ext = 512 ...
Then choose, swap = 0 ...
Let it finish ...
Put the CM7.2_MOD.zip in your sd, and flash the rom.
2.If you allready have a partitioned sd card, then you can skip the above first step.
Then, open root explorer and go to data folder.
Press and hold dalvik-cache folder and choose "move" .
Now go back and paste it to, sd-ext folder.
Press and hold dalvik-cache folder and choose "link to this folder".
Go back to data folder again and "create link" there.
That's it , reboot your phone and enjoy more free space to install applications.
NOTE 1. Rememper that partition sd, deletes everything in sd card, so have a copy of your sd card content to pc, to paste it back to sd.
NOTE 2. If you ever wipe cache and dalvik cache from recovery, then you must do the 2nd step and move dalvik to sd-ext again.
UPDATED , media_profiles.xml (12/08/2013)
For HD 720p video recording
Now you can record 720p video and stereo
There's not an option in camera settings , now option "high" will record 720p videos and stereo sound.
Get this ... media_profiles.zip
With root explorer , Extract it , take "media_profiles.xml" and paste it to "system/etc/" , replace and give permissions ( rw-r--r-- )
Reboot
Done
JB theme for CM7.2 Mod V1
Changelog
16 themed system apps ( accounts and sync,bluetooth,calculator,calendar, contacts, camera, download provider,deskclock,gallery3d, latinime,mms,package installer, phone,settings,systemui and framework res) .
Included, ice10 theme ( thanks to bhupatib ... http://forum.xda-developers.com/show....php?t=2003484 ).
Included, 720p HD camera fix.
No more grey screen after pin.
Download, CM7.2 JBthemeUpdate
http://www.mediafire.com/download/flz8rud4w9ldgfv/CM7.2_JBthemeUpdate.zip
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INSTALLATION
Put the zip in your sd card
Boot into recovery and go to advanced and choose reboot recovery.
Then, wipe cache partition and advanced and wipe dalvik cache.
Then, install zip from sd card/choose zip from sd card/ and choose the CM7.2 JBthemeUpdate.zip
Reboot system now
Wait about 3 min to boot
After phone boots, open theme chooser and apply ice10 theme.
Choose apply anyway
Reboot your phone
Enjoy ...
All GREDITS for ice10 theme goes to bhupatib ... http://forum.xda-developers.com/show....php?t=2003484
Screenshots , here ... http://forum.xda-developers.com/showpost.php?p=44908371&postcount=164
CM7.2 JB theme UNDO
To go back to default CM7.2 MOD theme
Download , CM7.2 JB theme UNDO
http://www.mediafire.com/download/aq...BthemeUNDO.zip
INSTALLATION
Open theme chooser and apply "system" theme
Put the zip in your sd card
Boot into recovery and go to advanced and choose reboot recovery.
Then, wipe cache partition and advanced and wipe dalvik cache.
Then, install zip from sd card/choose zip from sd card/ and choose the CM7.2 JBthemeUNDO.zip
Reboot system now
Wait about 3 min to boot
Enjoy
Took you long enough. Jk.
Your the man gk
Too late for me.
My -51 has cracked digitizer.
Time for change. I feel like dinglia
Sent from my SAMSUNG-SGH-T769.
yippeeee
I had problems with geno's CM7.2
while toggling mobile data, I would get "com.android.phone has stopped working".. all other things I fixed myself...
Now, since YOU are modding it... It has to be AWESOME!
Suggestion- Try libs & boot.img from MIUI_gingerbread (link is below).. That is a super powerful ROM.
[before I could try to do this, I was lured by PACman]
http://forum.xda-developers.com/showthread.php?t=2164951
[ROM 2.3] MIUI - 3D performance + smooth + power saving + stable
Going back to GB once my PC is fixed.
Sent from my GT-i9500 using XDA-Developers app
Somcom3X said:
Took you long enough. Jk.
Your the man gk
Too late for me.
My -51 has cracked digitizer.
Time for change. I feel like dinglia
Sent from my SAMSUNG-SGH-T769.
Click to expand...
Click to collapse
No dont go lol
And GK thanks again! Your works are Forcing me to flash GB again
Sent from my GT-N5100 using xda premium
You are the best! I will flash this ASAP.
Sent from my Dragon-U8800Pro using xda-developers app
Hi, thanks for your work.
I wanted to know if it works correctly the headset microphone, meaning if you can make calls with the headset. In miui 1.12.16 don't work (you can only listen).
I'm trying this new rom and it seems good. I can't automatically synchronize the date and time. some help ...: O
best rom
Best rom. Thanks.
marcolnx said:
Hi, thanks for your work.
I wanted to know if it works correctly the headset microphone, meaning if you can make calls with the headset. In miui 1.12.16 don't work (you can only listen).
Click to expand...
Click to collapse
I don't use headset , someone else must confirm this .... sorry.
baggino said:
I'm trying this new rom and it seems good. I can't automatically synchronize the date and time. some help ...: O
Click to expand...
Click to collapse
What do you mean?
Sync is working fine ..
And if you go to settings/date and time, uncheck the first box and change whatever you like.
Edit
First post updated, with instructions for moving dalvik to sd-ext partition, to save more free space for applications.
Sent from my u8800pro using xda premium
gkalenis said:
What do you mean?
Sync is working fine ..
And if you go to settings/date and time, uncheck the first box and change whatever you like.
Click to expand...
Click to collapse
I know how to set the date and time ... but in the automatic mode does not work. This is not a criticism but just point out ...I noticed I Sim slow Starting
thanks for the new rom :good:
THIS ROM IS 2.3 BASED ROM , SO MUST BE ON GINGERBREAD BASEBAND TO FLASH IT.
Click to expand...
Click to collapse
Where can I get that? I don´t even know what gingerbread baseband means :laugh:
I have now 4.0.3 version from Huawei official page but it boots my device several times a day now.
gkalenis said:
I don't use headset , someone else must confirm this .... sorry.
Sent from my u8800pro using xda premium
Click to expand...
Click to collapse
I will check later.
Sent from my SAMSUNG-SGH-T769.
I will check later.
---------- Post added at 06:56 AM ---------- Previous post was at 06:55 AM ----------
Kames said:
Where can I get that? I don´t even know what gingerbread baseband means :laugh:
I have now 4.0.3 version from Huawei official page but it boots my device several times a day now.
Click to expand...
Click to collapse
Flash step 2 of gb
Sent from my SAMSUNG-SGH-T769.
Somcom3X said:
I will check later.
Sent from my SAMSUNG-SGH-T769.
I will check later.
---------- Post added at 06:56 AM ---------- Previous post was at 06:55 AM ----------
Flash step 2 of gb
Sent from my SAMSUNG-SGH-T769.
Click to expand...
Click to collapse
Sorry but what??
Can someone please give me a link for the official GB? It seems that I deleted it from my computer and huawei servers are REALLY slow :/
Sent from my Dragon-U8800Pro using xda-developers app
SvTeam said:
Can someone please give me a link for the official GB? It seems that I deleted it from my computer and huawei servers are REALLY slow :/
Sent from my Dragon-U8800Pro using xda-developers app
Click to expand...
Click to collapse
http://www.mediafire.com/?7dyy01dzy68ns94 it is B572 i always use this for GB
Thanks bro you are a life saver
Sent from my Dragon-U8800Pro using xda-developers app
Installation
get into recovery
wipe data , wipe cache , wipe dalvik , format system , install zip ...
Click to expand...
Click to collapse
Could I have this in newbie-language also?
SvTeam said:
Thanks bro you are a life saver
Sent from my Dragon-U8800Pro using xda-developers app
Click to expand...
Click to collapse
if you know read greek or with help from google translation i made a tutorial with links about anything you want for update or downgrade from froyo to gb and ics and back and recoveries stock and custom here is my tutorial http://www.myphone.gr/forum/showthread.php?t=343712
don't forget to give a thanks
Kames said:
Could I have this in newbie-language also?
Click to expand...
Click to collapse
You're on ics baseband ..
You must download an official GB rom ( the link is 2-3 post behind).
Then make a "dload" folder on your sd card and put step2 from official GB inside the dload folder.
Then insert your sd card and hold vol+ , vol- and power on.
I have a guide for flashing official firmwares , here ... http://forum.xda-developers.com/showthread.php?p=37953739
You can also do the procedure without battery .... hold the 3 buttons and insert usb cable until phone vibrates ... the update will start.
After update finish, delete dload folder from sd card and power on your phone to boot on official GB.
Then you can enter pink screen, change recovery.img and flash CM7.2 MOD....
Sent from my u8800pro using xda premium
tzivas31 said:
http://www.mediafire.com/?7dyy01dzy68ns94 it is B572 i always use this for GB
Click to expand...
Click to collapse
Kames said:
Sorry but what??
Click to expand...
Click to collapse
Do what the above quote says but only do step 2.
Sent from my SAMSUNG-SGH-T769.

Categories

Resources