Hi guys,
some time( 6 months) looking for an Android 1.6, 2.1, 2.2 stable for my HTC HD (Blackstone), but each have different views and more negative ,
I noticed that most systems Android Not Working GPS,Bluetooth, Photo Camera and some applications, but I think maybe someone has found a good version of Android,
Tell me a good and stable OS Android.
Now running WM6.5 Energy, Dinik Glass.Mar.21.
And it would be better if you say a few opinions about Android OS,
Worth the Android operating system on HTC HD ?
Thanks in advance.
EDIT :
- For those seeking a Good and Fast Android. Thanks to All for all ->>
- Looking at the bottom of pages to find everything you need
This is Android 2.2.2
For files to work Android 2.2.2 go to post # 62 is 3 files ,copi to folder where is Haret
Good Luck !
gadar said:
This is the best rom i ever had,
wifi works
cam works
I think bluetoth works too, I just started once and it founds other devices.
fast, and verry stable. I had it on for about 50h without any crash, after that i restarted due to wifi error.
With wifi on and doing some thinks, like smsing browsing, playing a game some minutes it lasted for about 11-12h.
I think if you having this rom in standby mode, it will propably last more than 12h, I haven't checked it.
With this rom and this rootfs, it works like a charm!
Rom:
http://htcandroid.xland.cz/FRX06_Full_Bundle_25.3.2011.zip
Rootfs:
http://forum.xda-developers.com/attachment.php?attachmentid=546462&d=1300543569
I forgot to mention that I have Energyrom, but i agree with the previous post.
Google goggles works too and every other app!
Good luck!
Edit: I have checked it, this FRX06_Full_Bundle_25.3.2011 is a 24h build
note that with no wifi enabled.
And the first build that do not get that warm when wifi is enabled
Click to expand...
Click to collapse
Nobody even give me an answer ?
I'm using Froyo 2.2.1 CBV2. It's a good and stable rom. Cam & Wifi works. So you can play around with this rom while waiting for a good CyanogenMod 7 rom
Good luck!
Edit: I advice you to change rom in order to overclock your touch hd. Energy rom looks flashy but it's very slow (no offence).. I used it for quite a while.. but when changing rom I saw the real speed of touch hd!
The Best!
This is the best rom i ever had,
wifi works
cam works
I think bluetoth works too, I just started once and it founds other devices.
fast, and verry stable. I had it on for about 50h without any crash, after that i restarted due to wifi error.
With wifi on and doing some thinks, like smsing browsing, playing a game some minutes it lasted for about 11-12h.
I think if you having this rom in standby mode, it will propably last more than 12h, I haven't checked it.
With this rom and this rootfs, it works like a charm!
Rom:
http://htcandroid.xland.cz/FRX06_Full_Bundle_25.3.2011.zip
Rootfs:
http://forum.xda-developers.com/attachment.php?attachmentid=546462&d=1300543569
I forgot to mention that I have Energyrom, but i agree with the previous post.
Google goggles works too and every other app!
Good luck!
Edit: I have checked it, this FRX06_Full_Bundle_25.3.2011 is a 24h build
note that with no wifi enabled.
And the first build that do not get that warm when wifi is enabled
I tried FRX06 too.. but it's not as fast as Froyo 2.2.1 CBV2.. You have to prepare you're sd card (making partitions and stuff; all explained here) but it's really worth it!
playerxl said:
I'm using Froyo 2.2.1 CBV2. It's a good and stable rom. Cam & Wifi works. So you can play around with this rom while waiting for a good CyanogenMod 7 rom
Good luck!
Edit: I advice you to change rom in order to overclock your touch hd. Energy rom looks flashy but it's very slow (no offence).. I used it for quite a while.. but when changing rom I saw the real speed of touch hd!
Click to expand...
Click to collapse
You says to overclock my HTC HD, but that does not mean that changes (overclock) to speed procesor to burn it ? Like a procesor of Computer EX: procesor curent speed 1800 GHZ off 3000+ (procesor product AMD) but if i change speed of 2400 GHZ if posible to burn it, corect ?
Could also work a 2,4,6,7 months time, and then burn the procesor ?
I had an experience with the HTC Touch Diamond and burned to overclock the processor to 528 MHZ I went up to 688 MHZ, and after 2 weeks after he died (CPU burn, I find that to the guarantee, I have a friend who works HTC Service and that verdict has given me )
I am a little afraid to do overclock the HTC HD after I lived experience
playerxl said:
I'm using Froyo 2.2.1 CBV2. It's a good and stable rom. Cam & Wifi works. So you can play around with this rom while waiting for a good CyanogenMod 7 rom
Good luck!
Edit: I advice you to change rom in order to overclock your touch hd. Energy rom looks flashy but it's very slow (no offence).. I used it for quite a while.. but when changing rom I saw the real speed of touch hd!
Click to expand...
Click to collapse
About Energy Rom Glass Dinik, version March 21,phone works super well and fast, I have this version of 4/5 days and are pleased.
But as I said, I want to try Android OS.
gadar said:
This is the best rom i ever had,
wifi works
cam works
I think bluetoth works too, I just started once and it founds other devices.
fast, and verry stable. I had it on for about 50h without any crash, after that i restarted due to wifi error.
With wifi on and doing some thinks, like smsing browsing, playing a game some minutes it lasted for about 11-12h.
I think if you having this rom in standby mode, it will propably last more than 12h, I haven't checked it.
With this rom and this rootfs, it works like a charm!
Rom:
http://htcandroid.xland.cz/FRX06_Full_Bundle_25.3.2011.zip
Rootfs:
http://forum.xda-developers.com/attachment.php?attachmentid=546462&d=1300543569
I forgot to mention that I have Energyrom, but i agree with the previous post.
Google goggles works too and every other app!
Good luck!
Click to expand...
Click to collapse
Need to do overclocking ?
And if not, and if you do not mind give me the steps how to install Android OS you mentioned above,
I need to do partition of 8 GB card ?? , Give me some more detailed installation steps,
Thanks
DjMaryuslive said:
Need to do overclocking ?
And if not, and if you do not mind give me the steps how to install Android OS you mentioned above,
Thanks
Click to expand...
Click to collapse
First of all XDAndroid will not replace WinMo completely, yet.
There's no need to do any overclocking. You can, but it might cause instability issues.
Also, there's not one package that just runs 'out of the box' on Blackstone (Touch HD).
They either have missing functionality (GPS, Google Apps, whatever) or you need to follow a certain installation procedure.
Check out if this works for you:
- Get the FRX06 bundle from the Touch Pro/Fuze thread, follow the installation guide there too, but...
- use the correct startup.txt and ts-calibration (attached to post)
- get the special Blackstone kernel and rootfs by g3rm0 (see my signature), and then with everything on the SD card...
- follow the steps i described and you should be a happy camper.
Noroc
DjMaryuslive said:
Need to do overclocking ?
And if not, and if you do not mind give me the steps how to install Android OS you mentioned above,
I need to do partition of 8 GB card ?? , Give me some more detailed installation steps,
Thanks
Click to expand...
Click to collapse
I have those partition on my 8GB card. But i dont know if that helps.
Look at this video on youtube, download that program and do exactly as he did.
http://www.youtube.com/watch?v=aCV7Eu1pjWQ&feature=related
And follow steps that hrk7474 said.
Thanks!
Yes, use that build first and than try to use Froyo 2.2.1 CBV2 ...
You've to find out what Froyo build is really working for you..
For FRX06 you don't have to make partition of your 8gb sd card
For Froyo 2.2.1 CBV2 you do.. but it works well and still faster than the FRX06 build..
You don't have to overclock your phone if you don't want to!
So it's up to you.. Android is not fully optimized for our blackstones yet.. most things will work... But it's not as fast as it should be.. That's why the overclocking can be handy!
But you'll have to find that out yourself... Good luck!
gadar said:
This is the best rom i ever had,
wifi works
cam works
I think bluetoth works too, I just started once and it founds other devices.
fast, and verry stable. I had it on for about 50h without any crash, after that i restarted due to wifi error.
With wifi on and doing some thinks, like smsing browsing, playing a game some minutes it lasted for about 11-12h.
I think if you having this rom in standby mode, it will propably last more than 12h, I haven't checked it.
With this rom and this rootfs, it works like a charm!
Rom:
http://htcandroid.xland.cz/FRX06_Full_Bundle_25.3.2011.zip
Rootfs:
http://forum.xda-developers.com/attachment.php?attachmentid=546462&d=1300543569
I forgot to mention that I have Energyrom, but i agree with the previous post.
Google goggles works too and every other app!
Good luck!
Click to expand...
Click to collapse
STARTUPS folder -> Blackstone where put the startup.txt file? together with the file: Haret, Android apps, conf, etc, etc?
Or leave them there in the folder Blackstone
i tri to instal android you gave me and is say : Waiting for SD Card and noting hapend
DjMaryuslive said:
STARTUPS folder -> Blackstone where put the startup.txt file? together with the file: Haret, Android apps, conf, etc, etc?
Or leave them there in the folder Blackstone
i tri to instal android you gave me and is say : Waiting for SD Card and noting hapend
Click to expand...
Click to collapse
As I'm sure is described in the installation guide in the thread where you got the FRX06 bundle from, yes, the startup goes where haret is.
By the way, have you looked at this thread at all?
'Waiting for SD' is the 3rd question dealt with in the FAQ. The fix worked for me when i had the SD-card issue. (I later removed it from the startup and my SD has been working fine
I further advise you to read the other threads as well and use the search function, because if this is your first serious attempt to run XDAndroid on a Blackstone i seriously doubt there's anything you will run into that nobody has experienced or dealt with before.
Don't get me wrong, we're all glad to help out eachother, but most of the answers are all over the forums already.
hrk7474 said:
As I'm sure is described in the installation guide in the thread where you got the FRX06 bundle from, yes, the startup goes where haret is.
By the way, have you looked at this thread at all?
'Waiting for SD' is the 3rd question dealt with in the FAQ. The fix worked for me when i had the SD-card issue. (I later removed it from the startup and my SD has been working fine
I further advise you to read the other threads as well and use the search function, because if this is your first serious attempt to run XDAndroid on a Blackstone i seriously doubt there's anything you will run into that nobody has experienced or dealt with before.
Don't get me wrong, we're all glad to help out eachother, but most of the answers are all over the forums already.
Click to expand...
Click to collapse
I already tried it and no response,otherwise you can help me ?
DjMaryuslive said:
I already tried it and no response,otherwise you can help me ?
Click to expand...
Click to collapse
There are two (tree) possible fixes for "Waiting for SD card" issue
1. Make sure it's formatted to FAT32 filesystem.
if that doesn't work than
2. Open startup.txt --> find set cmdline and add this: msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave
it that doesn't work either you can only try another card. My 8GB Transcend card refused to work so I had to buy an old class 2 SanDisk 2GB. Good thing they are dirt cheap now
g3rm0 said:
There are two (tree) possible fixes for "Waiting for SD card" issue
1. Make sure it's formatted to FAT32 filesystem.
if that doesn't work than
2. Open startup.txt --> find set cmdline and add this: msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave
it that doesn't work either you can only try another card. My 8GB Transcend card refused to work so I had to buy an old class 2 SanDisk 2GB. Good thing they are dirt cheap now
Click to expand...
Click to collapse
same problem,the problem is the card 8Gb,thanks
Pff....
I tried all the above versions of Android and without any results, after restart back to windows mobile phone, why ??
My SD Card doesn't seem to work, why?
Most SD Cards are working, but if you the 'waiting for SDCard' message, you should try one of these fixes (and please let us know if it works)
Fix 1: Format your card with this tool http://www.sdcard.org/consumers/formatter/
Fix 2: Edit your startup.txt file and add these red entries to your cmdline:
set cmdline "lcd.density=240 msmts_calib=0x395.0x3c9.0x79.0x77 clock-7x00.a11=500 msmvkeyb_toggle=off pmem.extra=1 gsensor_axis=-2,-1,3
msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave"
Fix 3: Tell your wife / girlfriend that you are about to make some modifications to her phone... change the ringtone and steal her old Class 2 SD Card to use with Android. She will never discover what you have done, and if she does, you'll be able to use Android to send texts to your former girlfriends ;-)
Copy and paste from:
http://forum.xda-developers.com/showthread.php?t=627749
Follow that if you having card problem.
Thanks
HELP
gadar said:
My SD Card doesn't seem to work, why?
Most SD Cards are working, but if you the 'waiting for SDCard' message, you should try one of these fixes (and please let us know if it works)
Fix 1: Format your card with this tool http://www.sdcard.org/consumers/formatter/
Fix 2: Edit your startup.txt file and add these red entries to your cmdline:
set cmdline "lcd.density=240 msmts_calib=0x395.0x3c9.0x79.0x77 clock-7x00.a11=500 msmvkeyb_toggle=off pmem.extra=1 gsensor_axis=-2,-1,3
msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave"
Fix 3: Tell your wife / girlfriend that you are about to make some modifications to her phone... change the ringtone and steal her old Class 2 SD Card to use with Android. She will never discover what you have done, and if she does, you'll be able to use Android to send texts to your former girlfriends ;-)
Copy and paste from:
http://forum.xda-developers.com/showthread.php?t=627749
Follow that if you having card problem.
Thanks
Click to expand...
Click to collapse
I have a big problem when you need to calibrate the screen ... but I do not look to the cross with calibrate the screen.
It`s Show me the screen and first cross calibration ( in top left corner ) for 2 seconds ( I do not see the calibration screen, how can I do if I can not see the calibration screen ? ) and then continues installing Android,after the installation is complet i can not use the touchscreen because is not calibrated.
I use Startup.txt and ts-Calibration,but .... no efect
Mention that the 8GB card is not working I found a 1GB card and it works
Or tell me how you've done and the steps that you made when you put the files on the card,
All Android versions have the same problem, HELP !!!!
Thanks
I think after the first corner the calibration spot will appear after that the other calibration spots wont show up, but just push each corner after you see the first top left cal.ponit, then efter when you have pushed all other corners and are about to push the top right corner push once again the top left corner then it should proceed as normal....Thats what i was expierenced with this FRX06 build.
Or just put calibriation file in the folder where haret is started, main folder. Startup file must also be there, both files is for your Blackstone. You will find Startup file in the STARTUPS folder and the calibrations file from the link below.
Here you have calibrations files for your blackstone:
http://www.neopeek.com/viewtopic.php?f=14&t=6420&sid=e6dc7b1623778926cd9a7596329049e7
Good luck.
I'm currently running MIUI 1.8.5 installed on the Nook itself. It runs so well that I'm hesitant to try 1.9.2 because I've uninstalled and reinstalled ROMs before and had them act completely different. The only issue I have right now is with playing videos so I'm very happy with what I have. But does anyone know what changes were made in the new version that might make it worth trying?
The only difference that I saw was that the update seemed to run a lot 'snappier' for me. But after a couple of days use with 1.9.2, it started freezing up on me. Over and over and over. I tried re-installing it a couple of times, but in the end finally gave up. Back to 1.8.5 which still freezes on me occasionally.
I know people have varied results with each rom. If it hadn't done the freezing thing, I would have loved the update and stuck with it.
1.9.2 is running great for me o emmc but if ur running on sd card i think a bunch of ppl are having problems with any miui on the sd card
Thanks guys!
moz90 said:
1.9.2 is running great for me o emmc but if ur running on sd card i think a bunch of ppl are having problems with any miui on the sd card
Click to expand...
Click to collapse
I was running this on emmc.
I'm not too worried about it if there aren't any significant changes. I have 1.8.5 running on emmc, and it's running so well that I probably won't mess with it unless at some point there is a fix to improve the video playback.
Hi,
I am running a somewhat older version of MIUI on my NC. I run it off the emmc and it seems to work quite well. I got a friend at work interested, and he installed a newer version of MIUI, probably 1.916 or something like that (its the current release this week.) I also bought a nook color to haque for my mother to use.
Here is my question: I would like for both of mine to use the same ROM, but I have already laoded a bunch of games and other apps on mine. If I re-flash the ROM with the newer MIUI, I imagine that it wipes out everything. So...., is there a way to update the ROM and keep the programs and settings for wifi and the like ? I bet it requires renaming the file somehow, but I do not find any specific instructions for the MIUI roms.
Yea just minimally wipe your cache not factory reset then flash the ROM all your apps setting ect. Will be there
Sent from my Inspire 4G using Tapatalk
merkurmaniac said:
Hi,
I am running a somewhat older version of MIUI on my NC. I run it off the emmc and it seems to work quite well. I got a friend at work interested, and he installed a newer version of MIUI, probably 1.916 or something like that (its the current release this week.) I also bought a nook color to haque for my mother to use.
Here is my question: I would like for both of mine to use the same ROM, but I have already laoded a bunch of games and other apps on mine. If I re-flash the ROM with the newer MIUI, I imagine that it wipes out everything. So...., is there a way to update the ROM and keep the programs and settings for wifi and the like ? I bet it requires renaming the file somehow, but I do not find any specific instructions for the MIUI roms.
Click to expand...
Click to collapse
It is also a good idea to use the MIUI built-in Backup app to save all your settings and apps (just don't include contacts in the settings section as it seems to duplicate all of your contacts). This way, if you need to do a clean install, you can easily restore all of your stuff.
O.K., I took another microsd card and backed it up using the backup portion of CWM. No I am ready to install the newer miui. Question is...
I am sitting at the CWM prompt and I am thinking that I should somehow rename the MIUI.us-encore_1.9.16_eng_Deo_zipA_Signed_andmer.zip file into something like update.zip ??? Or, do I more siply pick that file name from the SD card and apply it as a zip ? on top of the MIUI 8.05 or whatever it was I already have ?
merkurmaniac said:
O.K., I took another microsd card and backed it up using the backup portion of CWM. No I am ready to install the newer miui. Question is...
I am sitting at the CWM prompt and I am thinking that I should somehow rename the MIUI.us-encore_1.9.16_eng_Deo_zipA_Signed_andmer.zip file into something like update.zip ??? Or, do I more siply pick that file name from the SD card and apply it as a zip ? on top of the MIUI 8.05 or whatever it was I already have ?
Click to expand...
Click to collapse
You can simply pick the filename from the SD card, no need to rename the file. Have you followed the directions for formatting, etc as well? What is on your Nook now?
Hi All, I have searched but not found an explaination thats clear to me.... here goes.
Ideos X5, mine, updated with GB from Huewai site - beta version, works great!!! beter battery, faster wireless etc... update when flawlessly using instructions included in the update file.
Tried to update my friends ideos x5 exactly the same but a white one, and first stage loading the update went fine but then when it restarted it to load 2nd update file, - the 1k one, it just goes to pink screen. Obviously not seeing the sdcard...
Its not bricked because it seems to work fine... just appears to be missing some apps like the wireless/bluettoth/gps switcher that appears on mine when i pul down the notification screen, also maps says it has an error , and he does not have the 'beyond the sky' theme.... and only default keyboard laylout that pretty much sucks.
Now - the question is - can i remove the sd card from my phone, put it in pink screen mode and copy the image folder to my pc then copy it out to his phone? will that work?
I can't seem to flash it agian as it appears to not see the sdcard in flash mode hence why it goes to pink screen mode.
What phone model do you have? Which version of rom (from which thread) did you download?
Probably you need to do a downgrade. You have a thread for that.
It was the update from the manufacturers web site as I stated above - the beta vresion of gingerbread, Ideos X5 U8800 is the model of phone, not the pro version.
As I sid it appears to be running GB and the 'about phone' screen confirms this, just the apps are not all there and the boot up is different, looks like its loading frodo intially with the IDEOS logo then an android title appears, then it loads up to the gb lock screen.
Use the update from this thread (B518): http://forum.xda-developers.com/showthread.php?t=1369296
It has only one step (2 steps are joined into one) and work fine
Edit: You can try using internal SD if it doesnt detect external... btw: Do you have fast bot turned off?
thanks fo ryur reply, but it did not help, this is the same version we used to get where we are at now.... it is two step upgrade, the last update file is 1k and has all the settings and apps config... or so it seems.
We have managed to get the update to complete, but there is one strange side effect, the internal sd only has 6 or 7 folders whereas my phone I upgraded 2 weeks ago has lots... I wonder if its write protected it or something.
to get round the "unable to see external sd" after running first update file - hence unable to load second file - by connecting to computer and replacing the imgage folder on the internal sd card with the ones from my phone. On restarting it imediately found external sd and the dload folder and completed its update.
Can some one explain why this worked? I don't understand why it did, but would like to.
Hello,
This is Sree Chandra and i am new to this forum.I came to know about this by one of my cousins saying that xda is the best forum for Android.
Coming to the issue,i use Samsung Galaxy Y GT-S5360...With the Kies PC suite ive updated my firmware.
So after visiting the forum i came to know that i can upgrade my mobile to ICS. Ive gone through the process of upgrading my mobile to ICS-JEALLY BEAN V3 bla bla.
While installing firstly through Clock Work Mode the cache and dalvick cache are not formatting as the error message displayed on mobile is E./: Error can't mount sd card..
Actually my 8GB sd card was partitioned and gave 1GB to internal memory.By connecting to PC ive formatted the 2nd partition through mini tool wizard.Even though the partition was formatted i get the error message while installing.
My mobile was running very fast on ICS :good:than the stock version of Android 2.3.6 given by samsung. But there was a problem while opening the Clock App for setting alarm.While setting alarm timing suddenly the app closes and shows error report to force close.
Please,give me the answer so that i will re-install the JEALLY BEAN V3.
Thank you..:laugh:
to make the answers very short:
there is no existing, working, stock ICS for SGY, you must be on a custom rom based on gingerbread themed like ICS,
kies and samsung will never update SGY to ICS since this is an entry-level phone,
No ICS (as of yet)..
Thank you very much for immediate reply...
But suggest me if there exist any methods to solve my problem..
sreechandra.kachibhotla said:
Thank you very much for immediate reply...
But suggest me if there exist any methods to solve my problem..
Click to expand...
Click to collapse
so let me re-iterate,
its 7gb for fat32 data, and 1gb for internal memory (ext=?)
you have installation errors while accessing CWM?
you have any ideas of what version of CWM you are using and from what source,
thanks for cooperating,
please allow me to assist you further
yeaaa 1GB is ext2 file system....
couldn't exactly say CWM version...
but i followed this link "http://forum.xda-developers.com/showthread.php?t=1679563" for installation..
Actually by the above link only i came to know about CWM..:laugh:
one thing that might help you: from what you said above you seem to on custom rom jelly blast v3 and the alarm bug you mentioned did exist in original jelly blast v3 but its been fixed in subsequent versions 3.0.1/2/3 of the rom ! so I'd suggest you to flash ota1,2&3 in order to resolve it!
sreechandra.kachibhotla said:
yeaaa 1GB is ext2 file system....
couldn't exactly say CWM version...
but i followed this link "http://forum.xda-developers.com/showthread.php?t=1679563" for installation..
Actually by the above link only i came to know about CWM..:laugh:
Click to expand...
Click to collapse
so you are on a custom rom "Jellyblast v3"
anyways,
try this CWM: http://db.tt/sIzhV4JP
and report if it still does not work,
and by the way the option Mounts and Storage>Mount USB Storage does not work in any CWM version,
you can also install a permanent CWM with savie's kernel (which i personally recommend) since i'm using it right now and is very fast,
follow the instructions here: http://forum.xda-developers.com/showthread.php?t=1761166
deathnotice01 said:
thanks for cooperating,
please allow me to assist you further
Click to expand...
Click to collapse
You don't have to go to your pro mode bro:thumbup:
@OP.. Also which kernel were you using when you got error? If it is stock.. that might be problem.. mini tool gives some times this problem.. use in built cwm partition / es data partition manager. I have used it to partition my 2 cards. And I don't face any problem till date.. just backup your data in sdcard if you want to attempt partitioning again..
Sent from the MUST have app!
nitubhaskar said:
You don't have to go to your pro mode bro:thumbup:
Sent from the MUST have app!
Click to expand...
Click to collapse
LOL
must.....resist.....urge......
Hi!
My HTC HD Mini was left and unused for few months after replacing touch-glass.
There were some issues like ie. not working wifi, vibra or sound.
Today it works. BUT. I left device becose i had SE Xperia X10 mini and i hate work on windows.
Nowadays, as my X10 died, i decided to go back to HD Mini. Luckily i found that there is a way to run Android on it.
So, i downloaded some quite old version (and then some newer CM7 - tried both), put it on sd and tried to load. It hang up for more than 20 min, so i rebooted (as it schould 5-10 min).
Now it reboots after status bar goes to 100% - so it takes about 20-30 seconds.
I got an idea to upgrade my winos (OS: 5.2.23103, ROM: 1.36.479.1), but when it goes to flash mode, it says 'starting', waiting for few seconds, and then "i can not upgrade your device" or whatever. Device only reboots.
Ofcourse i've searched forum and google for something simillar, but, maybe, i do not know how to ask.
Sorry for my english.
Thanks in advance,
Gloomwing
about SDCard, it could be problem of your sdcard is bad, bad sdcards won't work well with android.
and the NAND, Not sure about that, but you may try another ways or use the newest CWM that also works with schlund's ROM
Yup, I'll try with another SD (i have 2GB one which cames with X10) and will give info.
About NAND i prefer to run droid from SD at the moment - just do not want to risk installing OS that may not work on my device.
It works with ADATA 16GB, 10.
Did not try with windows update. Just installed Droid on NAND.
(furter issues in main topic of "[ROM] CM9 4.0.4 ICS HTC HD Mini [16.Jul.2012]"
Thanks and regards!
glad to see you so it was SDcard problem..
have fun..
Ok, i can not drop any post on main topic, so i will write here:
I read main topic, but it will last...
1. YES!, we need instruction (easy howto) about installing new ROM (i made it somehow, but i have some experience with X10)
2. Battery is messed up, but it works. It even last more than a day. Had some issue with 99% CPU usage - found some info to flash update - AGAIN! - we need howto!
3. My Photon freezes sometimes. I changed sleep time in screen section, and it helpes somehow. Maybe, again, battery issue? As i have less problems while battery over 50% or Trebuchet?
Many thanks and best regards!
(can anyone drop it in main topic?)
Let me know which one you're trying to install??