Database Users

[Q] Switching to android

I am a linux fan and I am using Linux for a long time.I bought the HTC HD2. I saw some youtube videos about Android Froyo on HD2.I want to try it but they were showing that you have to put the file on the micro sd card and you have run it from there.My question is if I do it can I run windows mobile after a new boot ?or it will boot android for all time?I just don't want to let windows go because may be i will switch back.Can any one please help me?

Yes, you can easily get into winmo, every time you shutdown android you have to load winmo first and then use haret to load android, so no worries .

mlhazan said:
I am a linux fan and I am using Linux for a long time.I bought the HTC HD2. I saw some youtube videos about Android Froyo on HD2.I want to try it but they were showing that you have to put the file on the micro sd card and you have run it from there.My question is if I do it can I run windows mobile after a new boot ?or it will boot android for all time?I just don't want to let windows go because may be i will switch back.Can any one please help me?
Click to expand...
Click to collapse
You can also get a boot loader from XDA and choose which you want to load at start up. windows or android...

HectiQ said:
Yes, you can easily get into winmo, every time you shutdown android you have to load winmo first and then use haret to load android, so no worries .
Click to expand...
Click to collapse
Thanks for quick reply.Do you know which devices will not work on HTC HD2 if I run Android?Cause little confused here .Some people says wifi does not work ,some says camera does not work.Do you know actually what does not work?

That was a loooong time ago^^
Now, EVERYTHING WORKS, unless:
- You have an inappropriate Kernel (some still have issues, but the latest one works flawlessly)
- You have an inappropriate ROM (there's been reports on CM6 not being ok with all Kernels, hence the 1°)
- You have an "Exotic" rom (Desire HD, Desire Z...) : these aren't fully supported ATM
However, there are known issues with:
- Tethering, especially Wifi, it's not yet always 100% ok
- Kernels, they are all being tweaked, but IMHO, go for it, I don't boot WinMo anymore
- And other small annoyances, but that depends on your device, rom, kernel, etc etc etc
FOR YOUR CONCERN:
- Booting from an SD card is far from a flaw (to me) : Copy aside your data.img, and copy a build over it. You'll never loose your personal data by flashing again
- Hence this : Don't ask for "the best Android rom", all you'll have will be personal opinions, and may not suit you. Try them, it's damn easy, you won't loose your personal data, it's a matter of days
- Ask about the really important stuff : Kernels and Radio, and things like that, but AFTER getting through the other post and thread. Nothing more annoying than a "noob" (and we've ALL been through there, but...) that didn't (at least) try looking for himself.
->Try asking questions, starting with "I've been looking for this, found this, understood this, but need help about that" and you'll see how people will be grateful ^^

mlhazan said:
Thanks for quick reply.Do you know which devices will not work on HTC HD2 if I run Android?Cause little confused here .Some people says wifi does not work ,some says camera does not work.Do you know actually what does not work?
Click to expand...
Click to collapse
To be honest, i just (finally) being able to install Froyo on my HD2, after a lot ROM changing, Radio ect....
I must say, is not really easy to finally find the perfect combination so u can use Froyo as your daily OS (at least for me)...but u will always got XDA, and from my opinion, all the hard work (flashing, changing rom/radio) is really worthed....
so far i dont have any problem running android on my HD2...
Sorry for my bad english....

[Q] Android dies after a few days - resets to windows on boot

Hi,
I seem to be having bad luck with my android installs.
I have an HD2 running the excellent Duttys ML v6 WWE rom with 2.15.50.14 radio.
I've added a variety of Android ROMS from Mdeejay and MDJ. They all work flawlessly for a few days. The only apps I added were Yahoo, quick settings and (for my sins) AngryBirds. Again, they all work OK.
Then after a few days, an update message might appear top left. If I install it, all is well until I reset the phone. Boots to windows, but when I tap Haret, it starts to load, then resets and loads windows again. Android is now dead and will not boot.
So now, I thought, ignore the updates. All good for a few days, until the battery went flat (as it does!). After charging it back up, again, the same problem, Android is dead, and just restarts to windows on booting Android.
To get Android back on the phone, I have to format the SD card, then copy everything across again. I have now done this 4 times due to Android messing up.
Has anyone else seen had this problem? I have had a look through the forum and can't find anything else similar.
They have just given me an HTC Desire as a work phone which is excellent, but I would really like to get my HD2 running Android reliably!
Thanks for your time, Chris.

Format card with this
Then run Android as normal (reading any build instructions) then dont be a dumbass and install official updates to a non-official build of android.

TheATHEiST said:
Format card with this
Then run Android as normal (reading any build instructions) then dont be a dumbass and install official updates to a non-official build of android.
Click to expand...
Click to collapse
I appreciate your help, but there is no need to be rude, we are not all HD2 gurus!
The only updates that have appeared are for apps that I have installed - angry birds for example. Not sure how this could kill an OS, be it official or otherwise.
Thanks for the SD formatter though. I will give this a go this morning and see how it goes...

whoops double post. damn ff.

Utterpiffle said:
I appreciate your help, but there is no need to be rude, we are not all HD2 gurus!
The only updates that have appeared are for apps that I have installed - angry birds for example. Not sure how this could kill an OS, be it official or otherwise.
Thanks for the SD formatter though. I will give this a go this morning and see how it goes...
Click to expand...
Click to collapse
ahhh you are referring to "app" updates, you never said that in your OP, I assumed you was referring to OS updates of some kind.
Updating a app will not have broken your Android build, It was just a coincidence unless its a app that affects system files maybe.

[Q] Looking for the Best and Stable ANDROID for HTC HD (BLACKSTONE) !

Hi guys,
some time( 6 months) looking for an Android 1.6, 2.1, 2.2 stable for my HTC HD (Blackstone), but each have different views and more negative ,
I noticed that most systems Android Not Working GPS,Bluetooth, Photo Camera and some applications, but I think maybe someone has found a good version of Android,
Tell me a good and stable OS Android.
Now running WM6.5 Energy, Dinik Glass.Mar.21.
And it would be better if you say a few opinions about Android OS,
Worth the Android operating system on HTC HD ?
Thanks in advance.
EDIT :
- For those seeking a Good and Fast Android. Thanks to All for all ->>
- Looking at the bottom of pages to find everything you need
This is Android 2.2.2
For files to work Android 2.2.2 go to post # 62 is 3 files ,copi to folder where is Haret
Good Luck !
gadar said:
This is the best rom i ever had,
wifi works
cam works
I think bluetoth works too, I just started once and it founds other devices.
fast, and verry stable. I had it on for about 50h without any crash, after that i restarted due to wifi error.
With wifi on and doing some thinks, like smsing browsing, playing a game some minutes it lasted for about 11-12h.
I think if you having this rom in standby mode, it will propably last more than 12h, I haven't checked it.
With this rom and this rootfs, it works like a charm!
Rom:
http://htcandroid.xland.cz/FRX06_Full_Bundle_25.3.2011.zip
Rootfs:
http://forum.xda-developers.com/attachment.php?attachmentid=546462&d=1300543569
I forgot to mention that I have Energyrom, but i agree with the previous post.
Google goggles works too and every other app!
Good luck!
Edit: I have checked it, this FRX06_Full_Bundle_25.3.2011 is a 24h build
note that with no wifi enabled.
And the first build that do not get that warm when wifi is enabled
Click to expand...
Click to collapse

Nobody even give me an answer ?

I'm using Froyo 2.2.1 CBV2. It's a good and stable rom. Cam & Wifi works. So you can play around with this rom while waiting for a good CyanogenMod 7 rom
Good luck!
Edit: I advice you to change rom in order to overclock your touch hd. Energy rom looks flashy but it's very slow (no offence).. I used it for quite a while.. but when changing rom I saw the real speed of touch hd!

The Best!
This is the best rom i ever had,
wifi works
cam works
I think bluetoth works too, I just started once and it founds other devices.
fast, and verry stable. I had it on for about 50h without any crash, after that i restarted due to wifi error.
With wifi on and doing some thinks, like smsing browsing, playing a game some minutes it lasted for about 11-12h.
I think if you having this rom in standby mode, it will propably last more than 12h, I haven't checked it.
With this rom and this rootfs, it works like a charm!
Rom:
http://htcandroid.xland.cz/FRX06_Full_Bundle_25.3.2011.zip
Rootfs:
http://forum.xda-developers.com/attachment.php?attachmentid=546462&d=1300543569
I forgot to mention that I have Energyrom, but i agree with the previous post.
Google goggles works too and every other app!
Good luck!
Edit: I have checked it, this FRX06_Full_Bundle_25.3.2011 is a 24h build
note that with no wifi enabled.
And the first build that do not get that warm when wifi is enabled

I tried FRX06 too.. but it's not as fast as Froyo 2.2.1 CBV2.. You have to prepare you're sd card (making partitions and stuff; all explained here) but it's really worth it!

playerxl said:
I'm using Froyo 2.2.1 CBV2. It's a good and stable rom. Cam & Wifi works. So you can play around with this rom while waiting for a good CyanogenMod 7 rom
Good luck!
Edit: I advice you to change rom in order to overclock your touch hd. Energy rom looks flashy but it's very slow (no offence).. I used it for quite a while.. but when changing rom I saw the real speed of touch hd!
Click to expand...
Click to collapse
You says to overclock my HTC HD, but that does not mean that changes (overclock) to speed procesor to burn it ? Like a procesor of Computer EX: procesor curent speed 1800 GHZ off 3000+ (procesor product AMD) but if i change speed of 2400 GHZ if posible to burn it, corect ?
Could also work a 2,4,6,7 months time, and then burn the procesor ?
I had an experience with the HTC Touch Diamond and burned to overclock the processor to 528 MHZ I went up to 688 MHZ, and after 2 weeks after he died (CPU burn, I find that to the guarantee, I have a friend who works HTC Service and that verdict has given me )
I am a little afraid to do overclock the HTC HD after I lived experience

playerxl said:
I'm using Froyo 2.2.1 CBV2. It's a good and stable rom. Cam & Wifi works. So you can play around with this rom while waiting for a good CyanogenMod 7 rom
Good luck!
Edit: I advice you to change rom in order to overclock your touch hd. Energy rom looks flashy but it's very slow (no offence).. I used it for quite a while.. but when changing rom I saw the real speed of touch hd!
Click to expand...
Click to collapse
About Energy Rom Glass Dinik, version March 21,phone works super well and fast, I have this version of 4/5 days and are pleased.
But as I said, I want to try Android OS.

gadar said:
This is the best rom i ever had,
wifi works
cam works
I think bluetoth works too, I just started once and it founds other devices.
fast, and verry stable. I had it on for about 50h without any crash, after that i restarted due to wifi error.
With wifi on and doing some thinks, like smsing browsing, playing a game some minutes it lasted for about 11-12h.
I think if you having this rom in standby mode, it will propably last more than 12h, I haven't checked it.
With this rom and this rootfs, it works like a charm!
Rom:
http://htcandroid.xland.cz/FRX06_Full_Bundle_25.3.2011.zip
Rootfs:
http://forum.xda-developers.com/attachment.php?attachmentid=546462&d=1300543569
I forgot to mention that I have Energyrom, but i agree with the previous post.
Google goggles works too and every other app!
Good luck!
Click to expand...
Click to collapse
Need to do overclocking ?
And if not, and if you do not mind give me the steps how to install Android OS you mentioned above,
I need to do partition of 8 GB card ?? , Give me some more detailed installation steps,
Thanks

DjMaryuslive said:
Need to do overclocking ?
And if not, and if you do not mind give me the steps how to install Android OS you mentioned above,
Thanks
Click to expand...
Click to collapse
First of all XDAndroid will not replace WinMo completely, yet.
There's no need to do any overclocking. You can, but it might cause instability issues.
Also, there's not one package that just runs 'out of the box' on Blackstone (Touch HD).
They either have missing functionality (GPS, Google Apps, whatever) or you need to follow a certain installation procedure.
Check out if this works for you:
- Get the FRX06 bundle from the Touch Pro/Fuze thread, follow the installation guide there too, but...
- use the correct startup.txt and ts-calibration (attached to post)
- get the special Blackstone kernel and rootfs by g3rm0 (see my signature), and then with everything on the SD card...
- follow the steps i described and you should be a happy camper.
Noroc

DjMaryuslive said:
Need to do overclocking ?
And if not, and if you do not mind give me the steps how to install Android OS you mentioned above,
I need to do partition of 8 GB card ?? , Give me some more detailed installation steps,
Thanks
Click to expand...
Click to collapse
I have those partition on my 8GB card. But i dont know if that helps.
Look at this video on youtube, download that program and do exactly as he did.
http://www.youtube.com/watch?v=aCV7Eu1pjWQ&feature=related
And follow steps that hrk7474 said.
Thanks!

Yes, use that build first and than try to use Froyo 2.2.1 CBV2 ...
You've to find out what Froyo build is really working for you..
For FRX06 you don't have to make partition of your 8gb sd card
For Froyo 2.2.1 CBV2 you do.. but it works well and still faster than the FRX06 build..
You don't have to overclock your phone if you don't want to!
So it's up to you.. Android is not fully optimized for our blackstones yet.. most things will work... But it's not as fast as it should be.. That's why the overclocking can be handy!
But you'll have to find that out yourself... Good luck!

gadar said:
This is the best rom i ever had,
wifi works
cam works
I think bluetoth works too, I just started once and it founds other devices.
fast, and verry stable. I had it on for about 50h without any crash, after that i restarted due to wifi error.
With wifi on and doing some thinks, like smsing browsing, playing a game some minutes it lasted for about 11-12h.
I think if you having this rom in standby mode, it will propably last more than 12h, I haven't checked it.
With this rom and this rootfs, it works like a charm!
Rom:
http://htcandroid.xland.cz/FRX06_Full_Bundle_25.3.2011.zip
Rootfs:
http://forum.xda-developers.com/attachment.php?attachmentid=546462&d=1300543569
I forgot to mention that I have Energyrom, but i agree with the previous post.
Google goggles works too and every other app!
Good luck!
Click to expand...
Click to collapse
STARTUPS folder -> Blackstone where put the startup.txt file? together with the file: Haret, Android apps, conf, etc, etc?
Or leave them there in the folder Blackstone
i tri to instal android you gave me and is say : Waiting for SD Card and noting hapend

DjMaryuslive said:
STARTUPS folder -> Blackstone where put the startup.txt file? together with the file: Haret, Android apps, conf, etc, etc?
Or leave them there in the folder Blackstone
i tri to instal android you gave me and is say : Waiting for SD Card and noting hapend
Click to expand...
Click to collapse
As I'm sure is described in the installation guide in the thread where you got the FRX06 bundle from, yes, the startup goes where haret is.
By the way, have you looked at this thread at all?
'Waiting for SD' is the 3rd question dealt with in the FAQ. The fix worked for me when i had the SD-card issue. (I later removed it from the startup and my SD has been working fine
I further advise you to read the other threads as well and use the search function, because if this is your first serious attempt to run XDAndroid on a Blackstone i seriously doubt there's anything you will run into that nobody has experienced or dealt with before.
Don't get me wrong, we're all glad to help out eachother, but most of the answers are all over the forums already.

hrk7474 said:
As I'm sure is described in the installation guide in the thread where you got the FRX06 bundle from, yes, the startup goes where haret is.
By the way, have you looked at this thread at all?
'Waiting for SD' is the 3rd question dealt with in the FAQ. The fix worked for me when i had the SD-card issue. (I later removed it from the startup and my SD has been working fine
I further advise you to read the other threads as well and use the search function, because if this is your first serious attempt to run XDAndroid on a Blackstone i seriously doubt there's anything you will run into that nobody has experienced or dealt with before.
Don't get me wrong, we're all glad to help out eachother, but most of the answers are all over the forums already.
Click to expand...
Click to collapse
I already tried it and no response,otherwise you can help me ?

DjMaryuslive said:
I already tried it and no response,otherwise you can help me ?
Click to expand...
Click to collapse
There are two (tree) possible fixes for "Waiting for SD card" issue
1. Make sure it's formatted to FAT32 filesystem.
if that doesn't work than
2. Open startup.txt --> find set cmdline and add this: msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave
it that doesn't work either you can only try another card. My 8GB Transcend card refused to work so I had to buy an old class 2 SanDisk 2GB. Good thing they are dirt cheap now

g3rm0 said:
There are two (tree) possible fixes for "Waiting for SD card" issue
1. Make sure it's formatted to FAT32 filesystem.
if that doesn't work than
2. Open startup.txt --> find set cmdline and add this: msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave
it that doesn't work either you can only try another card. My 8GB Transcend card refused to work so I had to buy an old class 2 SanDisk 2GB. Good thing they are dirt cheap now
Click to expand...
Click to collapse
same problem,the problem is the card 8Gb,thanks

Pff....
I tried all the above versions of Android and without any results, after restart back to windows mobile phone, why ??

My SD Card doesn't seem to work, why?
Most SD Cards are working, but if you the 'waiting for SDCard' message, you should try one of these fixes (and please let us know if it works)
Fix 1: Format your card with this tool http://www.sdcard.org/consumers/formatter/
Fix 2: Edit your startup.txt file and add these red entries to your cmdline:
set cmdline "lcd.density=240 msmts_calib=0x395.0x3c9.0x79.0x77 clock-7x00.a11=500 msmvkeyb_toggle=off pmem.extra=1 gsensor_axis=-2,-1,3
msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave"
Fix 3: Tell your wife / girlfriend that you are about to make some modifications to her phone... change the ringtone and steal her old Class 2 SD Card to use with Android. She will never discover what you have done, and if she does, you'll be able to use Android to send texts to your former girlfriends ;-)
Copy and paste from:
http://forum.xda-developers.com/showthread.php?t=627749
Follow that if you having card problem.
Thanks

HELP
gadar said:
My SD Card doesn't seem to work, why?
Most SD Cards are working, but if you the 'waiting for SDCard' message, you should try one of these fixes (and please let us know if it works)
Fix 1: Format your card with this tool http://www.sdcard.org/consumers/formatter/
Fix 2: Edit your startup.txt file and add these red entries to your cmdline:
set cmdline "lcd.density=240 msmts_calib=0x395.0x3c9.0x79.0x77 clock-7x00.a11=500 msmvkeyb_toggle=off pmem.extra=1 gsensor_axis=-2,-1,3
msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave"
Fix 3: Tell your wife / girlfriend that you are about to make some modifications to her phone... change the ringtone and steal her old Class 2 SD Card to use with Android. She will never discover what you have done, and if she does, you'll be able to use Android to send texts to your former girlfriends ;-)
Copy and paste from:
http://forum.xda-developers.com/showthread.php?t=627749
Follow that if you having card problem.
Thanks
Click to expand...
Click to collapse
I have a big problem when you need to calibrate the screen ... but I do not look to the cross with calibrate the screen.
It`s Show me the screen and first cross calibration ( in top left corner ) for 2 seconds ( I do not see the calibration screen, how can I do if I can not see the calibration screen ? ) and then continues installing Android,after the installation is complet i can not use the touchscreen because is not calibrated.
I use Startup.txt and ts-Calibration,but .... no efect
Mention that the 8GB card is not working I found a 1GB card and it works
Or tell me how you've done and the steps that you made ​​when you put the files on the card,
All Android versions have the same problem, HELP !!!!
Thanks

I think after the first corner the calibration spot will appear after that the other calibration spots wont show up, but just push each corner after you see the first top left cal.ponit, then efter when you have pushed all other corners and are about to push the top right corner push once again the top left corner then it should proceed as normal....Thats what i was expierenced with this FRX06 build.
Or just put calibriation file in the folder where haret is started, main folder. Startup file must also be there, both files is for your Blackstone. You will find Startup file in the STARTUPS folder and the calibrations file from the link below.
Here you have calibrations files for your blackstone:
http://www.neopeek.com/viewtopic.php?f=14&t=6420&sid=e6dc7b1623778926cd9a7596329049e7
Good luck.

Unstable HD2

Hello everyone,
I have a problem with my HD2, and Yes, I've read other "unstable HD2" topics.
However my problem is quite different.
My HD2 is unstable on any OS or ROM.
I've used some Polish roms, then Cruzers.
I found Cruzer 5 most stable, however I still had to reflash radio from time to time, and do hard reset quarterly to maintain stability (no OS modification, hacks or any other "funny" business meantime), stock OS's seemed stable at first, but then proved otherwise.
Now with m$ MyPhone closure I've decided to jump onto android as I've bought a PNA for Navigation.
I'm using Magldr + HyperDroid CM7 HeadyHoneyBadger and it seemed stable for quite some time.
Now just out of nowhere it begins to crash all the time, with no activity from me at all.
Installed additional programs, tested each one on aspect of stability, and none proved faulty:
- Eset Mobile Antivirus
- XConstruct
- 3g watchdog
- Goweather
- AndFTP
- Transdroid
- ConnectBot
- FLashplayer
- TitaniumBackup
- Make Your own clock widget
- TuneIn Radio
- Skype
- Dialer One
- Google SkyMap
- Google Maps with modded Navi
- Bluetooth File Transfer
- ASTRO File Manager
- RockPlayer Lite
- Robo Defense FREE
- Allegro
- MoboPlayer
- Minimal Reader
- CalWidget
- Battery Calibration
- Barcode Scanner
- Adobe® Reader®
- Shazam
Is there any hope for me?
Could You advise me anything?
Thank You for any responses,
GreQ

You need to do a clean install.
This means completley wiping both the NAND and SDCard.
Format SDCard with Panasonic SDFormatter....
Format: FULL+Overwrite
Size Adjustment: ON
Clean Install..
Get the HD2 Tools in the sticky thread in Android NAND section
Put phone into bootloader - Use Task29
Put phone into bootloader - Install MAGLDR
Then you will need to choose the appropriate CWM partition for the rom, check the thread for details or use the DFT flasher if it comes with one.
If this doesn't solve it you will likely need to get a new/different card.

TheATHEiST, Thank You for answering.
I've done those steps before doing an clean install of HyperDroid.
When I was testing those programs - if they're at fault or not I was doing clean install every time - it took a larger part of my life
My SD card is really slow, however I don't use EXT on SD, I have no EXT at all, may that be the cause?
If SD is faulty, would my HD2 benefit from better/faster card?

what exactly is unstable? can you give more details?

Thanks for answering jsmccabe78.
Most things in android FC after some time, or at the start, or even don't start at all.
On windows apps hang, close, sense doesn't want to boot up.
Yesterday when I thought I had a while until some total reflash I've tried to do backup via ClockWorkMod, and then even Magldr and CWM started hanging, now phone won't boot.
Doing total reflash, let's see if that helps... again..
It didn't help this time...
GAPPS, Framework crash all the time.
Radio 15.50 , HSPL 2.08, fresh MAGLDR.

Reflashed everything 2 times now, every time different app starts to malfunction...
.12. Radio seems to improve stability.

strange. often when things are bad on different os on one machine, hardware seems to be the culprit. but seems like you have a ghost in the machine!
i want to re-iterate what theatheist said.
clean install. i mean clean.
task 29 (tho not sure how useful)
flash back to wm
reformat sdcard - so everything is deleted and it is like it is squeaky new.
then try a rom.
if still weird, try a new sdcard.
sorry, if after completely cleaning / new sdcard/ etc. still with problems, is likely hardware. but i am by no means the end all of knowledge on this!

Thanks again for reply.
This time, when I wrote about .12. radio I've done this:
- task 29
- flash original 3.14 rom
- task 29
- magldr
- cwm
- cwm -> install HyperDroid
And for now it's about 48hr without any major hang, however CalWidget still hangs on occasion.
Nothing left for me but to wait for quad-core device with qwerty.

1- is this the first time you did task 29?
2- did your re-formate your sd card?
curious about #1.
if problems arise, do #2. (what's to lose?)
good luck until the dream phone comes out. ha! cheers, mate. good luck.

1. I've been doing Task29 all the time , I do it every time I need to touch ROM
2. I did

well fingers crossed. i don't know anything more than what you have done. really.
best of luck!

After you have done a clean install as others have posted, and you still have the problem. You might try a new SIM card. I have seen some bad ones causing lockups.

hi,
i´ve many problems with my device.... i tested many many roms of android and wp7 too...
problems are freezes and reboots in every rom... in different roms i have no internet connection or if a call arrives the phone freezes and a robot sound appears...??? sometimes i started the browser and the device reboot...
the next is... the original winmob6.5 stockrom has the same problems... but not too much like android or wp7....
did anyone have an idea...
P.S. i´ve tested 3 different sd cards
thanks

Maybe try doing an RMA?
Device might be the problem.

[Q] Nand Build Help

Hello there! i wish you all happy new near
so,i am new here and since i can't post in the developement part of the forum i came here to ask for help.
i use this rom: (Nand) http://forum.xda-developers.com/showthread.php?t=1914723
this guy has made 3 versions and all of them have problems. only for me i guess.. cause all of the comments i read are positive.
For those who already succeeded in doing this, i request some help.
here are the roms :http://code.google.com/p/nandroid-for-htc-blackstone/downloads/list
i installed all them.
the older rom is exactly the same as the update-black...
the fagyidroid it the newest and most people claim that it's the best.
but..
if i use the first 2 roms,the speed and performance are awesome, but i can't read the sd card. i already tried going to crm,pressing mount sd card but no luck. btw reboot device won't work..
if i use the fagyidroid, everything works. but it laggs. very much.
so the first 2 are incredibly fast but sd and wifi won't work while other users don't experience these problems
and if i use the second one, the phone is too slow.
any help would be appreciated since fagyi or other members won't reply.. and ofc i can't post a reply... (FAIL RULE)
what i do is
1)press volume key down + power button
2)update the black.nbh
3)add the command lines from my pc
4)press mount system and boot
5)factory reset
6)mount sd card
7)install the android.
8)Reboot --- but i won't reboot,in fact it freezes (i pull out the battery or reset from the back)
am i doing sth wrong ?

As fagyi has said this is still work-in-progress, and be patient with the boot.
If all fails, you may have to re-flash again.
Alternatively, you may want to try the FRX07.1 microsd version, but you may have to do a hard reset back to Windows Mobile first. Just make sure you have a fast (>Class4 microSD).
I had tried the microsd version and it works.
Update 14 Feb 2013
I had tried fagyi's [ROM] {NAND} AOSP-GBX | < Kernel: 2.6.27 > | 2013.01.20 and it works.
*Use the ODEXED version.
*Take note of the SD card workaround for Wi-Fi
*Phone SD card -to- PC by USB limitations. Need to do standalone SD card-PC by USB (SD card not in phone).

Hi all,
There is a new release, FagyiDROID-V1.zip.
I'm trying it and it looks so pretty. Fagyi has made many improvements and solved some issues ans bugs.
I have proven the previous version, and the more important bugs that I have found are the quick discharge of the battery and the delay of the clock in 10-15 minutes during battery charging.
I hope those will be solved in this new version.
Regards