Database Users

[Q] I brick my L7 Help needed

Hey, really i need Yours help, I have a big problem with l7.
Phone is switched on only in emergency, or if i just turn the phone hangs on the LG logo.
I tried to fire up fastboot but jumps secure booting error.
CM10 previously installed according to the instructions in some forum, but did not work the mobile phone network, so I wanted to reinstall the factory soft by KDZ.
Unfortunately, the first attempt was unsuccessful, and now when trying to install any version of the system (V10K, V10a), the phone is detected at the begining, and installs soft, but after this, phone is restarting and freezes on LG logo, and the computer tries to install the driver for "MTP USB Devices" Unfortunately, the driver is not installed and the installation is not coming to an end.
I tried to install the phone in a mode other than CDMA and EMERGENCY, but there is an error in the system "model II msg not found" and the installation ends with the same result.
Mention that several times before installing the factory soft and there were no problems. Perhaps it is a matter of something that I installed on the phone with the CM10 (unlocking bootloader?)
After the installation process in KDZ upgrade error message pops up wparam: 100 lparam: 6
I will be very grateful for any help.
I'm sorry for my english if something is dificult to understand. Then i'll explane everything You need.

solved problem
When the L7 stuck on the LG logo, restart the process, run the file Flash_Bootloader.bat then Flash_Recovery.bat, then Reboot2Recovery.bat. When you get into Recovery Mode, do the restore files that you have done this before, or reinstall CM10 ..... that's all you need to do and your L7 will work again. I hope I helped .... Regards:fingers-crossed::fingers-crossed::fingers-crossed:

I think its communication problem when you flashing through KDZ. Try changing modem port of the phone wich is free and reflash it!

R: [Q] I brick my L7 Help needed
I had this problem too, just flash homero' s V10K and when it finishes DONT disconnect The phone from The PC,when phone is booting fire up terminal on your PC and write adb reboot recovery, Then when you are in CWM wipe data,cache, dalvik and reboot!
Sent from my LG-P700 using xda app-developers app

Hi all,
i have the same Problem, i install the V10K.kdz file
but the L7 freeze at the boot logo... i have no Idea...
i Flash also with this file---> homero' s V10K - the same effect freeze on the Boot logo
hope u can help me
:good: :good: :good:

DuckDagobert007 said:
Hi all,
i have the same Problem, i install the V10K.kdz file
but the L7 freeze at the boot logo... i have no Idea...
i Flash also with this file---> homero' s V10K - the same effect freeze on the Boot logo
hope u can help me
:good: :good: :good:
Click to expand...
Click to collapse
Just follow what I described in the post before yours,and your phone will boot

Hi,
thanks for your Comment :good::good:
I try it 100, but it doesnt work
i dont know, my the Problem is, can u make ah tutorial with Pic ??
or when u are German, can u send me ah PN ??
Greets

Yeah,I'll make a tutorial
Just posted the Thread in Android Development !

[Q] lge400 bricked need help im a newbie

hi, im new here and i need help i've got a problem on my lg optimus l3. I think my phone was bricked. i can no longer access recovery mode but i still can go to emergency mode. then i tried to use kdz and it try to bring it back to the old l3 which is ginger bread.. oh by the way im using cm9 and sdmerge that time when suddenly my phone restarted and open then restart again.. non stop restarting.. so i decided to format it.. but when i reformat it my memory became 15mb only..
thats the time i tried to use kdz.. but when i used kdz to flash the old firmware im getting an error.. that was the time i can no longer acess my recovery mode. and also when im in emergency mode my pc is not recognizing my phone.. ive redownload and reinstall all the drivers but still no luck..
now i cant open my phone.. it always stuck in lg logo and go to white screen and back to lg logo again..
please someone help me..:crying::crying:

LGE400Addict said:
hi, im new here and i need help i've got a problem on my lg optimus l3. I think my phone was bricked. i can no longer access recovery mode but i still can go to emergency mode. then i tried to use kdz and it try to bring it back to the old l3 which is ginger bread.. oh by the way im using cm9 and sdmerge that time when suddenly my phone restarted and open then restart again.. non stop restarting.. so i decided to format it.. but when i reformat it my memory became 15mb only..
thats the time i tried to use kdz.. but when i used kdz to flash the old firmware im getting an error.. that was the time i can no longer acess my recovery mode. and also when im in emergency mode my pc is not recognizing my phone.. ive redownload and reinstall all the drivers but still no luck..
now i cant open my phone.. it always stuck in lg logo and go to white screen and back to lg logo again..
please someone help me..:crying::crying:
Click to expand...
Click to collapse
does your phone come-up with blank (black but backlit) screen ?
if it does then you will be able to use kdz updater in attached link LG-RDTT_1.0.5.4 (needs included windows enabler for this version)
use THIS GUIDE to flash just skip the hosts file editing steps
and let us know
LG-RDTT_1.0.5.4

IGGYVIP said:
does your phone come-up with blank (black but backlit) screen ?
if it does then you will be able to use kdz updater in attached link LG-RDTT_1.0.5.4 (needs included windows enabler for this version)
use THIS GUIDE to flash just skip the hosts file editing steps
and let us know
dl.xda-developers.com/attachdl/8c343b1d694e531790a4bedc4a0d3dc3/530e4e21/2/5/9/9/9/3/9/LG-RDTT_1.0.5.4.zip
Click to expand...
Click to collapse
ok i will try thanks.. i will let you know immediately. where can i get that LG-RDTT something?
sorry for the bad english

LGE400Addict said:
ok i will try thanks.. i will let you know immediately. where can i get that LG-RDTT something?
sorry for the bad english
Click to expand...
Click to collapse
my computer doesnt recognizing my phone when in emergency mode..
i dont know what to do in the files ive downloaded.. i followed all the instruction..
can you give me pictures or videos...
my phone is not booting and its going white screen and back to lg logo again..
when i try to use VOLUME - plus home and POwer button.. its stuck in lg logo..
when i connect it in pc in that situation the computer reconize my phone but with some failed installing deivce..
i know im doing something wrong but i cant figure it out.. coz im not an expert..
im losing hope that i can bring back my long time lge400 friend..

soft brick.no recovery.no boot.only download mode

i tried to upgrade my samsung grand prime(SM-G530H) using kies .the process completed without any disturbances but then my phone got soft bricked. no recovery too.. the phone keeps on rebooting but doesnt pass the boot screen. only download mode is accessible. tried to flash every possible thing via odin,but no improvements. Flashed recovery img and official firmware too. but no use.
i have not found a solution till now for this exact problem.Help me out

hey please help me i cant even go to download mode and recovery i was installing the stock firmware after that i had installed xenon rom for my sm-g530h it had some problems or bugs so i decided to install the downgrade stock firmware, when i started to install, it was not installing i tryed about 3 times, and now, i cant get any response now, i cant able to put in download mode or recovery, even it dont showing me the charging... please help me i cant detect it on my computer also please help me :crying:

facing same problem
mak3022 said:
i tried to upgrade my samsung grand prime(SM-G530H) using kies .the process completed without any disturbances but then my phone got soft bricked. no recovery too.. the phone keeps on rebooting but doesnt pass the boot screen. only download mode is accessible. tried to flash every possible thing via odin,but no improvements. Flashed recovery img and official firmware too. but no use.
i have not found a solution till now for this exact problem.Help me out
Click to expand...
Click to collapse
i am also facing same problem pls help me out if the solution is there/

lenovo a6000 softbrick

guys i have softbricked my lenovo a6000 and its stucked on lenovo logo
i have tried adb method to flash back recovery mode but when i rum commands it gives error == device null found
when i connect my device to pc it makes an connected sound help me out of this as this is the only mobile i was having
plzzzzzzzzzz guyzzhelp me out

Bro need help I installed twrp and then cm 13 on my a6000 and by mistake I deleted backup of my stock kk rom and now when I try to go in download mode, recovery it doesn't open it show only Lenovo logo . By mistake I flashed a6000+ stock recovery and after that when I try to flash stock recovery of a6000 using adb nothing open .. so now nothing download mode or recovery mode is opening but i still boot into cm13 how solve it to revert back to kk ?

Solution
Shubhamraaj said:
guys i have softbricked my lenovo a6000 and its stucked on lenovo logo
i have tried adb method to flash back recovery mode but when i rum commands it gives error == device null found
when i connect my device to pc it makes an connected sound help me out of this as this is the only mobile i was having
plzzzzzzzzzz guyzzhelp me out
Click to expand...
Click to collapse
I had also stuck in boot logo once in a custum ROM .
but i fixed it : steps .
Download twrp recovery in your pc. ( rename it as twrp.img ) ,
Boot your phone in to fastboot mode .,
Make sure ur pc has ADB drivers ,
Once , phone get into fastboot mode ,
Type this Commands : 1)fastboot devices ( to check if ur phone is getting detected or not , if it shows no device found , check connection )
2) fastboot flash recovery twrp.img ( to flash recovery)
3) fastboot reboot recovery ( to boot into recovery )
4) download any ROM to SD card and flash it from recovery.
Hit thanks button if this helped you.

Hello guys I have a6000 (Lenovo)
But my problem I saw this video
. Which is easy to revert back to kk rom but I have installed twrp which is not useful for above video method .so when I try to to install Philly or cwm which is used in above video it not installing only twrp will installing other custom recoveries not installing so please help me!!! If anybody have the twrp backup of stock kk rom of a6000 please send me!!

My lenovo a6000 also got stock on boot logo in a custom rom. Its now in no use. Now when i try to connect ut to my pc, its only charging. My device is not being connected to pc. Now what to do ??

Androidsabya said:
My lenovo a6000 also got stock on boot logo in a custom rom. Its now in no use. Now when i try to connect ut to my pc, its only charging. My device is not being connected to pc. Now what to do ??
Click to expand...
Click to collapse
FOLLOW THIS

Need help
sasukay said:
FOLLOW THIS
Click to expand...
Click to collapse
Actually 1st i did root my lenovo a6000. Then i was trying to install cyanogen rom through sd card. But it showed e verification failed. And while booting it gets stock showing cyanogen logo. I tried my phone to connect to pc, but it only charges my phone but doesn't show up in connected device in my laptop. I went to an mobile repair shop, bcoz i thought may be i was missing something. But after visiting 3 repair shops, they also couldn't solve my problem. Now how can i get my mobile to back condition ? Need help. If anyone can help plz give quick rply. But i need to talk to someone who can help regarding this issue. So if you can talk to me, plz call me 7008678740. Thank. Plz give response.

New problem arrised
sasukay said:
FOLLOW THIS
Click to expand...
Click to collapse
I could successfully restored my lenovo a6000 kitkat rom. But a new problem arrised. When i try to power on, it just starts for 2 seconds and vanishes immediately just showing the lenovo logo. Again n again it just being on and off. When i put this battery in another a6000 plus mobile, the same problem occurs. I mean , i want to know why is this happening ? Is the battery gone !!!

Androidsabya said:
I could successfully restored my lenovo a6000 kitkat rom. But a new problem arrised. When i try to power on, it just starts for 2 seconds and vanishes immediately just showing the lenovo logo. Again n again it just being on and off. When i put this battery in another a6000 plus mobile, the same problem occurs. I mean , i want to know why is this happening ? Is the battery gone !!!
Click to expand...
Click to collapse
On first look, it seems like your phone is in bootloop and you need to flash new ROM after wiping the partitions correctly. But, then you are saying that same thing is happening when you insert this battery in another A6000. I think your battery has gone rogue due to some virus, just throw it away. Jokes apart, if another device is showing same behaviour then its almost 100% sure, that your battery has issues and need to be replaced. And, why don't you actually check switching on your phone by putting the battery from that another A6000 into your A6000.

I have checked with another battery, my phone works fine. But that particular battery is doing only on off continuously. But #important thing is , i don't think the battery has gone. Bcoz during the on off process, if i press volume down key, it shows lenovo logo and gets stock there. If the battery has problem, then how can be it stays on showing the logo ?? Confused ???

Rebooting to Bootloader doesnt work. ZUK Logo appears and seems like frozen

Hello Guys,
i have a Problem with this Handy. It was stuck in a Bootloop for two days then i tried to flash with a cm rom but appearently it didnt worked and messed up the Fastbootmode. Today i successfully restored my Z1 with the QPST Software but the Bootloader still wont work. Can someone tell me how to fix this? Because i want to install a other rom (current rom displays a watermark like thing on the screen).
Thanks and have a nice day

same problem here .
Toastbrotstern said:
Hello Guys,
i have a Problem with this Handy. It was stuck in a Bootloop for two days then i tried to flash with a cm rom but appearently it didnt worked and messed up the Fastbootmode. Today i successfully restored my Z1 with the QPST Software but the Bootloader still wont work. Can someone tell me how to fix this? Because i want to install a other rom (current rom displays a watermark like thing on the screen).
Thanks and have a nice day
Click to expand...
Click to collapse
plz tell me how u used qpst software to recover your phone

mmprknown said:
plz tell me how u used qpst software to recover your phone
Click to expand...
Click to collapse
well i just followed a tutorial in youtube since it didnt worked with the adb sideload.
i just connected my z1 while holding volume up so that the software can recognize it. Then i loaded the qualcomm firmware and selected the xml of the tutorial with a recovery.img. After that i just clicked download and it worked again.... except i cant get to the bootloader. My thoughts are that i somehow ripped/deinstalled the bootloader.