So I've installed CM10 but it gets stuck on the bootlogo. For some reason my device seems to have a faulty USB port as I've been able to previously connect via ADB but the computer now doesn't recognize the device simply giving me "Error 43". The recovery menu also hangs up at the google/padlock screen.
Is there any way to fix this?
If it can't be fixed should I return this to Google based on the USB port is broken which would allow me to fix all the software issues?
Related
hello i have opad p10 oem version of advent vega after some market application install first my desktop window gone then i tried to restart in recovery mode but tablet is no screen cant inter in cwm only white circle with andriod robot with in upear micro second and gone pleas help i cant connect with my pc because usb problem any method to boot or flash with sdcard i have some knowledg about linux and lablet install 3.2 9n1 thanks sorry for my bad english
As far as i am aware the only way out is to reflash the stock firmware, without usb your a bit stuck. what is the problem with the usb connection?
i am trying 3 systems xp w7-64 w7-32 all are device not recognized error in device maneger is yellow mark unknown device
You need to install the usb recovery drivers. They are on the advent/pov websites. I assume there the same as your tab.
i cant access my tablet because i have usb not recognized error i want any alternat method to flash my tablet rom like sd card or usb drive thanks
no one solved my problem any idea if i use usb to serial cable or usb to lpt cable
You need to sort the usb driver issue. That will solve your problem. As far as i am aware flashing the stock rom with any other cable is not possible.
finaly i found a pc i install a nvidia driver audi sign green but run moddedstock its showing error nvflash uid read failed what this error and some time nvflash runing but blank screen nothing hapen
every time connect to pc masseg appear this device perform faster but connect to usb 1.1 and every time flash hang betwen system.img copying last file why is connect slow speed not full usb 2 speed there is cable problem or some thing else or driver problem ihave tried vega flash and modded stock v2 any help to try with linux ubuntu pleas help me thanks
any help to flash only system.img or only flash cwm to boot into cwm and then install modded rom in to opad
Can you boot in recovery mode?
SGS2-i9100; SGS3-i9300; Archos 101 Turbo (G9/250gb/512mb)
Hi everyone,
I'm trying to flash my tablet in order to get the calling option; but the problem is that when I turn it off to install its drivers on my pc, and when I connect it to the usb cable and the cable to the pc, the tablet's logo immediately appears and goes to the charging screen and this way I can't install its drivers. Does anyone have any ideas how I can solve this problem?
Many thanks in advance...
Hey guys I tried to connect my nexus 7 to my Windows 7 laptop but nothing popped up it just showed as charging on my n7 I've tried update the drivers and different cables and different laptops too but it's all the same, even fastboot doesn't show up or mtp in twrp, any ideas how to fix this guys?
Anyone got any idea how to fix this problem?
Hey,
Have you tried enabling USB debugging in Settings > Developer Options?
Fobos531 said:
Hey,
Have you tried enabling USB debugging in Settings > Developer Options?
Click to expand...
Click to collapse
Cheers mate but yep I tried that and nothing changed
I'm in the same boat. Had this problem for a long while, almost had my guarantee expire so I had it fixed. Not sure what caused it, or what fixed it. But couple of weeks later I was transfering some files through the now working USB port and accidently touched the cable - the device lost connection mid-transfer and since then I was unable to use the USB to transfer files, or connect the device to anything but the charger..
Along comes the 5.1 OTA which I decide to install and mid-install there was an error and the device soft-bricked - I can't boot it, it shows the Android robot with a red traingle and exclamation mark and 'No command.' written under it, at which point it reboots after a couple of minutes.
I can access recovery and fastboot mode and excecuted a factory reset but to no avail. Does anyone know how to fix the USB so that I can reflash stock and make my device work again?
Also, any ideas if one could bypass the use of the USB port in fixing the softbrick would also be helpful.
Armeddy said:
I'm in the same boat. Had this problem for a long while, almost had my guarantee expire so I had it fixed. Not sure what caused it, or what fixed it. But couple of weeks later I was transfering some files through the now working USB port and accidently touched the cable - the device lost connection mid-transfer and since then I was unable to use the USB to transfer files, or connect the device to anything but the charger..
Along comes the 5.1 OTA which I decide to install and mid-install there was an error and the device soft-bricked - I can't boot it, it shows the Android robot with a red traingle and exclamation mark and 'No command.' written under it, at which point it reboots after a couple of minutes.
I can access recovery and fastboot mode and excecuted a factory reset but to no avail. Does anyone know how to fix the USB so that I can reflash stock and make my device work again?
Also, any ideas if one could bypass the use of the USB port in fixing the softbrick would also be helpful.
Click to expand...
Click to collapse
Do you twrp installed mate?
No, I do not.
I need some help guys.
My Nexus 7 all of a sudden stopped sending data through usb OTG and i tried to erase cache through TRWP but ended up deleting the OS. Now I am stuck with a device with no OS. I cannot mount the USB for my computer to recognise it so that I can restore it. I tried ADB sideload but it doesnt load and gets stuck on starting...
If I click on Mount, I cannot click on the USB-OTG box. My computer does have the correct drivers for the USB as it used to work on it before but since the OTG stopped responding to data I am now stuck and cannot push a restore image to the device.
Any help would really be appreciated.
Many thanks.
I've tried almost everything I can think off. I tried different OTG cables, different computers. None of the computers even detect a device as plugged in. Whether I boot into bootloader or recovery I just cannot get the PC to even acknowledge the fact that something is plugged in. As a result I am just not able to flash it at all. I tried NRT with the soft-brick option but that fails too because it says no adb connectivity.
any help please?
My father device suddenly decided to get stuck right after boot with the above error message.
I tried reboot into safe mode but got the same result.
I tried to connect it to my PC using abd(after installing drivers), but for some reason adb didn't recognize the device (fastboot however did find it).
Any ideas before doing hard reset?!