Related
EDIT: The below issue has been fixed. Here's the guide: http://forum.xda-developers.com/showthread.php?t=1110599
---
Howdy folks!
I've just bought a Nook Color, and I followed these instructions to the letter:
http://wiki.cyanogenmod.com/index.php?title=Barnes_&_Noble_Nook_Color:_Full_Update_Guide
(I've done it before and it worked perfectly)
However, this time after installing CM7 and the GApps zips, I reboot and I cannot see the Market app. It doesn't exist. (see attached image).
I thought maybe it was just a problem where I simply have to add a google account...
I go to menu->settings->accounts and sync->add account
Rather than the normal "choose an account type" dialog, It says "you can configure an exchange account" and I am not given the option to choose a Google account.
I reimaged a different SD card and rebooted into recovery using that card and wiped data, wiped cache, installed CM7, installed gapps, and rebooted.
Once again, the same exact issue.
I reboot to recovery again and this time I just install gapps and reboot... same issue...
Any help would be extremely appreciated, and if you can solve this problem for me, I'll even 'donate' 5 bucks if you have that set up.
Any help or advice would be greatly appreciated here.
Thanks!
Could it matter what version of CM7 you're using?
Thank you for the response.
I've tried CM7.0.3 and the latest nightly [today]
Google Apps pretty clearly did not install. My best guess is either you somehow grabbed the wrong package or your download just got corrupted. You should scrap the gapps...zip you downloaded and re-download this package:
I just tried it to double-check, and the main download link was flagged malicious by Avast and didn't load, so I used the mirror. Try that.
With CM7 installed, make sure Wi-Fi is set up (sometimes prevents complications), then reboot into ClockworkMod Recovery. Insert the SD card with the new gapps-gb-20110307-signed.zip file in the root directory. Choose "install zip from sd card," then "choose zip from sd card," then "gapps-gb-20110307-signed.zip," then "Yes."
You should see some text in the bottom half of the display indicating that the install is proceeding, and eventually that it has finished. Click the power button to back out to the main menu, then "reboot system now."
If that doesn't do it, I've about exhausted my knowledge.
Hello, and thank you for the reply.
I've tried it on two different sytems on 3 different nooks with 3 different SD cards and various different versions of gapps and CM7 including the nightlies.
This problem started when the nooks with the "green stickers" came out.
(Green sticker indicates that it has the new version of Nook software, while a blue sticker indicates that it has the weird new partitioning scheme. These do not have the blue sticker.)
I've tried enabling wifi and whatnot, and then reinstalling the gapps package but no bueno. The apks don't even seem to exist in the system\app directory.
This is a global problem with any new Nooks. I think i just happen to be one of the first ones to experience it.
Sent from my Transformer TF101 using XDA Premium App
This has been an ongoing problem for me since I came back to CM7 from HC last week. I don't think it has anything to do with the old or new because I got my NC on launch day.
I had figured that it was just something I had done (I get distracted easily so following directions is....oooooh! A bunny! ) but I've reflashed CM7 and GApps 3 seperate times.
It's only really an annoyance for me since I had most of my apps backed up and I've managed to get the Amazon store and AppPlanet up and running. I'd just like to get the Google market running just so I can have the Trifecta.
I really hope we can figure this out. I know this can't be just me.
What actually happens when you try to install the gapps zip? Does CWM indicate that it is in fact installing the package, and then that it's done?
Taosaur said:
What actually happens when you try to install the gapps zip? Does CWM indicate that it is in fact installing the package, and then that it's done?
Click to expand...
Click to collapse
indeed it does
some added info:
on the "green sticker" nooks, when you try to flash the update OR the gapps, it says it can't mount system or data to make logs, but still seems to work fine. If I manually mount system or data first, it doesn't throw the errors. After flashing CM7, I get fewer errors. CM7 flashes just fine, and the gapps install and CM7 both say install completed, it's just the gapps that don't show up :S
I've heard some people were having trouble flashing the latest stable 7.0.3 and getting gapps to install. This worked for me. I flashed cm7.0.2 from cyanogens site and the google apps add on on the same page. I then flashed 7.0.3 without the google apps add on included with 7.0.3 and it worked. Hope that helps some people
I'm not really sure what you're saying. The gapps aren't installing is the problem.
S/He's saying try installing the previous stable build and see if gapps will install with that. If so, you can then upgrade to 7.0.3 and gapps should remain in place. Technically that's what I did, just because the new stable came out after I had 7.0.2 up and running on SD, but I didn't have any problems flashing gapps with the 7.1 beta to eMMC later on.
ah, I see - I tried that. in fact, I know that on previous versions of the Nook, the gapps installed just fine. I think it's something to do with the 'green sticker nooks'.
I hope this gets or has gotten solved as I just bought a "green dot" NC.
The issue persists, I'm afraid. While it seems I'm not the only one with the problem, there appears to be no solution.
Update: The issue persists on the "blue dot" nooks.
Several 'green-dot' owners have reported installing everything just fine, so that may not be the source of your woes. Have you tried the repartitioning thread for blue-dots, even though you don't have a blue-dot? It seems like your best bet is to one way or another get your NC into a state identical to machines that aren't having this issue.
Taosaur said:
Several 'green-dot' owners have reported installing everything just fine, so that may not be the source of your woes. Have you tried the repartitioning thread for blue-dots, even though you don't have a blue-dot? It seems like your best bet is to one way or another get your NC into a state identical to machines that aren't having this issue.
Click to expand...
Click to collapse
yes sir, I've repartitioned as well.
Could it be the fact that I'm using CWM 0.7?
thisnameissoclever said:
yes sir, I've repartitioned as well.
Could it be the fact that I'm using CWM 0.7?
Click to expand...
Click to collapse
0_o where did you even get something like that? The current version is 3.0.2.8
You need one of the images from here: http://forum.xda-developers.com/showpost.php?p=13283643&postcount=34
I used the one on the CM7 wiki but I can see that wiki has been updated this week. I will try the one you linked and get back on this thread if it works. Thanks a ton. Hope this hasn't all been due to my retardedness. B-)
I have a NC 1.2. I am able to root using a CWM 3.0.2.8 Msd card with Manual Nooter no problem. The problem occurs when I shut it off and then reboot. It gets to the part where the words "Nook Color" start scrolling across the screen. "Nook Color" completes one time successfully and when it starts scrolling again, it stops halfway through the first "o" in "Color", and just repeats indefinitely. The only thing I could do is completely reset, eight failed boots. At first I thought it may be an older version of CWM on my Msd card so I made a new one with v. 3.0.2.8 and rooted successfully, but first time I shut it off and rebooted, it happened again. I am thinking only thing to do is never turn it off. Any ideas would be greatly appreciated.
reebz said:
I have a NC 1.2. I am able to root using a CWM 3.0.2.8 Msd card with Manual Nooter no problem. The problem occurs when I shut it off and then reboot. It gets to the part where the words "Nook Color" start scrolling across the screen. "Nook Color" completes one time successfully and when it starts scrolling again, it stops halfway through the first "o" in "Color", and just repeats indefinitely. The only thing I could do is completely reset, eight failed boots. At first I thought it may be an older version of CWM on my Msd card so I made a new one with v. 3.0.2.8 and rooted successfully, but first time I shut it off and rebooted, it happened again. I am thinking only thing to do is never turn it off. Any ideas would be greatly appreciated.
Click to expand...
Click to collapse
What version MN are you using? You’re not wiping anything when you flash MN, right?
reebz said:
…At first I thought it may be an older version of CWM on my Msd card so I made a new one with v. 3.0.2.8 and rooted successfully, but first time I shut it off and rebooted, it happened again. I am thinking only thing to do is never turn it off.
Click to expand...
Click to collapse
Are you saying that after you flash MN, you remove the SD card, it will fully boot up into the OS, then when you turn off the device and try to turn it back on, it will then not boot up? Or, are you saying that after you flash MN, you remove the SD card, and then the device fails to boot?
It sounds to me like you are wiping the system before you flash MN, but until I get the answers to the above questions, I can’t say for sure. MN is a add on pack for the stock OS, not a full rom, so you don’t wipe before you flash.
I have latest version of MN. I do not wipe anything. I boot into CWM and install MN with a msd card. Upon successful installation of MN, I remove msd card and reboot successfully that one time into a rooted NC. I can use Gmail app, download and install from both Android and Amazon markets. However, if I power down completely and reboot, it loops as explained in my OP.
reebz said:
I have latest version of MN. I do not wipe anything. I boot into CWM and install MN with a msd card. Upon successful installation of MN, I remove msd card and reboot successfully that one time into a rooted NC. I can use Gmail app, download and install from both Android and Amazon markets. However, if I power down completely and reboot, it loops as explained in my OP.
Click to expand...
Click to collapse
Are you updating Adobe Flash? You can't directly update Adobe Flash from the Nook Color. The most common issues that will cause a boot loop on a NC after having a fully working device, are installing the wrong kernel, and updating Adobe Flash from the Market. If you updated Adobe Flash, download the attached file, and flash with CWM. The file should delete the old flash player, and install the updated one. This should give you a working device again. If it does work for you, please report back here so others will know what the fix it.
GMPOWER said:
Are you updating Adobe Flash? You can't directly update Adobe Flash from the Nook Color. The most common issues that will cause a boot loop on a NC after having a fully working device, are installing the wrong kernel, and updating Adobe Flash from the Market. If you updated Adobe Flash, download the attached file, and flash with CWM. The file should delete the old flash player, and install the updated one. This should give you a working device again. If it does work for you, please report back here so others will know what the fix it.
Click to expand...
Click to collapse
I have updated Flash Player from the Market after rooting. If I remember correctly, I've powered down after rooting and installing numerous apps, including Flash, and rebooted . Maybe that's the culprit. I have not installed a different kernel. I'll go ahead and install the attached zip, with much thanks, but I don't know if I want to power off and reboot, for fear of dreaded boot loop.
Ok, I installed Flash Fix and rebooted, and the same boot loop is occurring. Looks like time to reset and reroot, and for now, never turn it off.
reebz said:
I have updated Flash Player from the Market after rooting. If I remember correctly, I've powered down after rooting and installing numerous apps, including Flash, and rebooted . Maybe that's the culprit. I have not installed a different kernel. I'll go ahead and install the attached zip, with much thanks, but I don't know if I want to power off and reboot, for fear of dreaded boot loop.
Ok, I installed Flash Fix and rebooted, and the same boot loop is occurring. Looks like time to reset and reroot, and for now, never turn it off.
Click to expand...
Click to collapse
I just realized that I missed a step in the install script for that file, that is why it did not work for you. Yes, adobe flash is your problem. To update Adobe Flash on the nook color, you have to uninstall the old version, and then install the new adobe flash.
For all future references, I have attached the working Adobe Flash fix file. It includes flash version 10.3.186.3, that was released today. It has been tested to work, and you can allow auto-update in the market without future problems.
Ok, thanks, I will reluctantly give this a try when I get home from work.
Edit: Ok, now. I'm trying to uninstall Flash Player and having difficulties. It doesn't show up in the app drawer, so I go to Market to see if there is an uninstall option, but there is only an update option, so I updated, and then uninstalled to see if that would work, but it still showed up in "my apps", in market. I opened up app drawer and selected manage apps and found it, but selecting the uninstall button does nothing. I then tried installing Titanium Backup and after installing, Titanium Backup won't open and doesn't even show up in my app drawer. So, I'm a little stymied now. Unsure what to do next
reebz said:
Ok, thanks, I will reluctantly give this a try when I get home from work.
Edit: Ok, now. I'm trying to uninstall Flash Player and having difficulties. It doesn't show up in the app drawer, so I go to Market to see if there is an uninstall option, but there is only an update option, so I updated, and then uninstalled to see if that would work, but it still showed up in "my apps", in market. I opened up app drawer and selected manage apps and found it, but selecting the uninstall button does nothing. I then tried installing Titanium Backup and after installing, Titanium Backup won't open and doesn't even show up in my app drawer. So, I'm a little stymied now. Unsure what to do next
Click to expand...
Click to collapse
Titanium Backup is going to be your best bet to do the uninstall process. When you selected update Flash from the market, then went and uninstalled it, you were only uninstalling the update. If TB installed, then it should show up in the app drawer of Zeam launcher. You can go into the market, and select to open it from there. Sometime it will not open on first attempt, because it is trying to ask you to give it root permission. If you still have trouble with it not opening, then uninstall it, and try to install it again. You can also open up the “Superuser” app to make sure that it has not been denied root permission.
TB definitely didn't appear in Zeam app drawer. I'm charging now and give it another shot in a bit.
Edit: Success. I got TB installed. I made a stupid error. I only installed the paid app, not the free also. I got Flash uninstalled and installed your Flash Fix.zip with numerous reboots with no boot loops.
GMPOWER, Thanks for your assistance
GMPOWER said:
For all future references, I have attached the working Adobe Flash fix file. It includes flash version 10.3.186.3, that was released today. It has been tested to work, and you can allow auto-update in the market without future problems.
Click to expand...
Click to collapse
I don't normally bump old threads, but this just saved me
Thanks a lot, I was at wits end figuring out why it was boot looping.
dreadwing said:
I don't normally bump old threads, but this just saved me
Thanks a lot, I was at wits end figuring out why it was boot looping.
Click to expand...
Click to collapse
Same here. Big thanks to GMPower! (My first post here, now I can use the Thanks button!)
Total noob question. This is my first time rooting. I got the root to work fine but updated Flash before finding out about the loop. I'm not sure what I'm supposed to do to fix this problem. OP in this thread said he reinstalled MN 4.6.16 via bootable SD with CWM and could get his nook to boot up. I tried that and rebooted but I'm still getting stuck in the loop.
Do I need to wipe my nook before reapplying MN?
dahcheet said:
Total noob question. This is my first time rooting. I got the root to work fine but updated Flash before finding out about the loop. I'm not sure what I'm supposed to do to fix this problem. OP in this thread said he reinstalled MN 4.6.16 via bootable SD with CWM and could get his nook to boot up. I tried that and rebooted but I'm still getting stuck in the loop.
Do I need to wipe my nook before reapplying MN?
Click to expand...
Click to collapse
Use the zip file in post #7 (in this thread). Drop it onto the same SD card you used to load MN 4.6.16. Put the SD card in and it'll boot to CWM....then flash that zip file the same way you flashed MN. Then, power off the NC, remove the CWM SD card and put in your regular SD and turn the NC back on. That should be it...no more boot loop.
I've got the same issue as the thread started and I downloaded the zip from post 7 and flashed it just like I flashed MN, but it's still boot looping. It gets a bit farther into the "Nook Color" logo but keeps repeating.
Boot Loops NC 1.3
GMPOWER said:
For all future references, I have attached the working Adobe Flash fix file. It includes flash version 10.3.186.3, that was released today. It has been tested to work, and you can allow auto-update in the market without future problems.
Click to expand...
Click to collapse
This problem started for me on Rooted 1.3. October 5th, Applied this fix.
Thanks GMPOWER
I figure I will explain my problem in more detail. I am working with my girlfriend's Nook trying to get it rooted. The first time I did she had 1.2 stock and I rooted it successfully. She updated flash not knowing that it would cause a boot loop. I had no idea how to fix it so she set it back to factory settings and procedded to update to 1.3 to see if that would solve the boot loop. I rooted it again and it started boot looping again. I found this thread and the flash fix. I flashed it onto the Nook and it fixed the loop problem.
Well she found out that the marketplace has limited visibility with 1.3 and wanted to go back to 1.2 to have her full visibility back. So she factory reset it again, I rooted it again and it started boot looping again. This time though the fix from post 7 isn't helping. I flash it and then reboot and it loads the "Nook Color" logo once fully and then stops and starts it over again and gets stuck at "Nook Col".
Is there anyone who might be able to help me with what the problem is, or am I gonna have to reset it back to stock, use Titanium Backup to remove flash and then use the zip from post 7? I know that it's not a root problem because I successfully rooted my mom's Nook before my girlfriends and her's is working fine.
Followed your instructions and my problem solved, many thanks!
johnny15 said:
Use the zip file in post #7 (in this thread). Drop it onto the same SD card you used to load MN 4.6.16. Put the SD card in and it'll boot to CWM....then flash that zip file the same way you flashed MN. Then, power off the NC, remove the CWM SD card and put in your regular SD and turn the NC back on. That should be it...no more boot loop.
Click to expand...
Click to collapse
my first post. thanks GMpower
just had this happen to me too. I've tried the flash update, and I get slightly more of the nook color boot graphic but it still hangs.
any thoughts?
Update 20111117: Updated .zip file to Adobe Flash 11.1 and AIR 3.1.
Update 20111020: Updated .zip file to reinstall Flash and AIR, previous version didn't properly fix AIR.
Steps I used to update Adobe Flash (to version 11.0) and AIR (version 3.0) so it doesn't update automatically and thus get me back into the boot loop cycle (again):
Go to Titanium Backup ( Pro )
You need to uninstall with this since these are system apps
Buy a Pro key and keep it on your SD card root, since this app will save your bacon
Uninstall Adobe AIR and Adobe Flash Player from Titanium Backup
It will warn you that you are uninstalling a system app, that's OK
I think that is why the update through Market isn't working
Open Market, Install Adobe Air (3.1.0.488 as of this post) and Adobe Flash Player (version 11.1 11.1.102.59 as of this post)
Nook seems to be working after several reboots. Also, note that Adobe updated their apps. After following the procedure above, I was able to update via Market without any problems with bootlooping.
Obviously, the above steps only work BEFORE Adobe gets auto-updated and you get in the boot loop cycle. If you are already in the boot loop cycle, download this file (Updated link, should work better this time):
FlashPlayer11.1_AIR3.1_Update_Fix_20111117
and install it using a ClockworkMod Recovery SD card.
Get a ClockworkMod Recovery SD card
http://forum.xda-developers.com/showthread.php?p=11987469
Put the zip from the above post on the SD card
Reboot your Nook with the SD card inserted
Install from Zip, Select zip from SD card, select the flash update
This basically will uninstall flash and air as system apps and install as a user apps. This is based on the zip from GMPOWER which updated flash to 10.3, which worked for some but not others, perhaps because it didn't touch Air:
http://forum.xda-developers.com/showpost.php?p=16526691&postcount=7
Also note, I have been through several cycles of restoring backups, restoring to factory, re-rooting, etc. this last week, so I was getting very annoyed and cautious. I think I was able narrow it down to just the Adobe updates causing my problems. I have been able to update ROM Manager, Superuser, and just about everything else with updates; and besides the Adobe updates, everthing worked, and I don't currently have a boot loop problem.
Note, I didn't update Superuser or ROM Manager until after I applied the above updates to Flash and AIR. After several reboots, my Nook is still working fine.
For those of you who are still having trouble getting your Nook back, and the attached zip doesn't work for you, you can do the following. Using the instructions on this site, I got my Nook back up and running to factory new condition:
http://mrm3.net/nook-color-recover-any-bricked-device/
(Quick method at top, not older methods below; instructions slimmed down from several posts here at XDA, updated for stock 1.2) also here on XDA:
http://forum.xda-developers.com/showthread.php?t=914690 (original restore to stock post)
http://forum.xda-developers.com/showthread.php?t=1050520 (update for stock rom 1.2)
Then, I registered my Nook (again).
At this point, I could have tried to update to 1.3, but my patience was a bit low, so I didn't go for it. If you do, be sure to follow the appropriate ManualNooter instructions here:
http://forum.xda-developers.com/showthread.php?t=1054027
Since I was still on Stock 1.2, I rooted using ManualNooter 4.6.16
(while in CMR, after running ManualNooter, I also applied update-Froyo1.2-dalingrin-OC-emmc-090111.zip, and that seemed to work without a hitch)
Then I reinstalled all the other apps I wanted on my Nook,
=== BUT DID NOT YET UPDATE ADOBE FLASH OR AIR ===
Flashed ClockworkMod Recovery, updated a lot of my apps using Market and Amazon Appstore, restored data and other apps from Titanium Backup,
Then I made a full backup of my Nook using CMR. (still booting normal, running fast and clean)
After confirming my Nook was as I wanted it, and that I had a good backup, I did the steps at the top of this post to update Adobe Flash and AIR.
After confirming that was working, and getting another backup on my SD. I then did the updates to ROM Manager and Superuser. It seemed like those updates happened at the same time as the boot loop, so I was cautious. My Nook is still working well without boot loops as of yet.
Results:
Kernel: Stock 1.2
Rooted with: ManualNooter 4.6.16
Additional Mods:
update-Froyo1.2-dalingrin-OC-emmc-090111.zip,
ClockworkMod Recovery 3.2.0.1,
ROM Manager 4.5.0.1, Titanium Backup 4.5.2,
Adobe Flash 11.1, Adobe AIR 3.1 (uninstalled system app, reinstalled via Market, updated via Market)
[Update Zip] CMR zip to update Flash Player and Air
I updated the original post with a link to the zip to fix the FlashPlayer and Air apps. I had intended to post it here, but since I'm new, I can't link externally in a reply.
Please let me know if there are any problems with the zip and I will get it updated. It worked on my Nook.
I updated the zip file 20111020 to fix a problem with the AIR reinstall.
Wow, thank you so much for this! I wish I had known this on the weekend when I was gong crazy trying to figure out why I was getting bootloops over and over. I can't seem to give you thanks though (probably because I never post, just lurk).
So far I haven't done the uninstall/re-install with TB. I am just making sure my Adobe air and Flash don't update, and when Air did I went into Nook Color Tools and uninstalled the update to set it back to what it was originally. That worked but it is a pain if it keeps happening. I will try the TB to uninsall the programs.
I too did a update on ROM Manager and Superuser (and a binary update), and all is still well. No bootloops. I hold my breath though every time my NC gets to the "color" part until the N appears and it all disolves.
thanks for this!!! this was really getting very frustrating.
Well while I would like to report that the flash fix worked, it didn't. It was already on the boot loop so I installed the update with a flashed SD card and nothing. Still stuck in a boot loop. At this point I am just about ready to give up on this device being a fully functional tablet.
Thanks for this information. My nc is currently in a bootloop and won't load CWR. It shuts off before getting to that point (my bootloop is adobe air related). None of the restore to stock via SD card have worked for me. I'm now looking at ADB options, the post you referenced with the fix has some instructions for that. Did you use the ADB or the SD card instructions? I was actually rooted with CM7 before the bootloop.
Thanks,
shy guy1 said:
Well while I would like to report that the flash fix worked, it didn't. It was already on the boot loop so I installed the update with a flashed SD card and nothing. Still stuck in a boot loop. At this point I am just about ready to give up on this device being a fully functional tablet.
Click to expand...
Click to collapse
I realized that my zip was not working to uninstall and reinstall Air properly. Try the updated zip file in the post.
shelly29 said:
Did you use the ADB or the SD card instructions?
Click to expand...
Click to collapse
I used the SD card instructions. Unless you have done something strange to your nook (not sure what), it should always boot from the SD card first, so you should never have problems booting into CMR from an SD card.
If the link in the original post doesn't work for you to get a CMR SD card, try the instructions here:
http://mrm3.net/nook-color-updated-clockwork-recovery-bootable-sd/
If you have a newer Nook, you may need to repartition your Nook's internal memory and use CMR version 3.2.0.1. See details here (this guy just condenses the instructions you can find on various posts on XDA, and tries to keep it up-to-date)
http://mrm3.net/nook-color-how-to-blue-dot-nook-color/
Also note that I updated the zip file in the post to correctly uninstall and reinstall Flash. I re=bootlooped my nook, and after applying the new zip, my nook was working.
Just an update....
I wanted to let U guys know that I had updated Adobe Flash, Air and Super Users and this has worked for me. I also went to double check the versions of both Flash an Air and they are the newest versions!? I still went to uncheck the "Update Automatically" setting in the market for them both just in case for future updates for the time being. Back up and Running! Thanks Again to ALL involved who put contributions to this
This may have worked for me
I tried the updated fix posted here, and the Nook booted properly. Thank you for this fix; I hope it continues to work for me.
I will have to locate the automated back up mentioned here (Titanium), and I will see how this works. I had been leaving my Nook on at all times to avoid the reboot until I turned it off yesterday, forgetting that I did not want to do that.
Awesome post.
So...after all this is said and done and I manage to get a restore image to load and actually boot, now the library doesn't sync and the shop won't load and I get error messages such as " internal error exception executing the command ". It is like the B&N servers are confused. Any ideas about that?
I'm having the boot loop issue and neither the zip nor the 1.2 restore work to get past it. Does anyone have any ideas?
Thanks!!!! You are my new best friend. XD I ended up reflashing several times before I found this post. Followed the instructions and my Nook is happily running Android again without reinstalling (again!). I thank you. My Nook thanks you. And the Angry Birds who would have had to start from scratch thank you.
Thank you! It appears to work now. I've restarted a few times with success!
Took me about an hour to find this thead. I knew there would be an easier fix than starting from scratch. The zip worked on my rooted 1.2
Thanks! Keep up the good work
Thanks! That worked for me.
Stagnation1 said:
I'm having the boot loop issue and neither the zip nor the 1.2 restore work to get past it. Does anyone have any ideas?
Click to expand...
Click to collapse
From my previous searches, it seems the boot loop is usually caused by either an incompatible installation of Adobe flash, or an incompatible kernel (central part of the ROM). Hopefully the OP zip will fix the first, but I'm not sure of another way to fix the second, other than reflashing and rerooting. How far in the reflash/reroot process do you get before it boot loops again?
mastigia said:
So...after all this is said and done and I manage to get a restore image to load and actually boot, now the library doesn't sync and the shop won't load and I get error messages such as " internal error exception executing the command ". It is like the B&N servers are confused. Any ideas about that?
Click to expand...
Click to collapse
Hmm, haven't seen that error. I'm not sure whether its related to the same problem. It sounds like you might need to re-register your nook with B&N. I'm not sure if you can do this without restoring to stock. Not much help, sorry.
I can't post a reply to this ([NC][1.2][1.3] ManualNooter 4.6.16) thread yet - Still new to these forums... I was one of the many in that thread who had installed ManualNooter 4.6.16 on Nook Stock 1.3 only to end up with a boot loop.
Wish I had found this thread last week - would have saved me a lot of headaches!
It's okay though - every boot loop is another opportunity to learn something new.
Thanks much for the easy walkthrough and I hope others find their way here too.
Just saw another new update for Flash & Air .. released yesterday I believe. Has anyone try them yet ? Just don't want to was my time getting into a boot loop again by updating it.
--
Hello,
I was running one of the CM9 nightlies and decided to try one of eyeballer's with OpenGL, and was able to make the switch without any problems, but after a while wanted to go to a non-openGL build and after flashing it my Nook won't boot past the loading screen.
I have a 1GB card with CMW which I'm able to boot to, I've tried wiping data, format boot and format system and reinstalling one of the builds that had previously worked, but still get stuck on Cyanoboot's loading screen. Even tried going back down to CM7 to see if that helped, but stuck on that loading screen as well.
What am I missing here? I've formatted boot, system, cache, data, everything, but the issue persists.
Any suggestions as to how I can make my Nook come back to live.
ryuz4ki said:
Hello,
I was running one of the CM9 nightlies and decided to try one of eyeballer's with OpenGL, and was able to make the switch without any problems, but after a while wanted to go to a non-openGL build and after flashing it my Nook won't boot past the loading screen.
I have a 1GB card with CMW which I'm able to boot to, I've tried wiping data, format boot and format system and reinstalling one of the builds that had previously worked, but still get stuck on Cyanoboot's loading screen. Even tried going back down to CM7 to see if that helped, but stuck on that loading screen as well.
What am I missing here? I've formatted boot, system, cache, data, everything, but the issue persists.
Any suggestions as to how I can make my Nook come back to live.
Click to expand...
Click to collapse
Well, for one thing, never format boot.
After trying cm7, you still get cyanoboot? It should have changed to the green cyanogenmod logo. If not then your flashes are not working.
Sent from my Nook Color running ICS and Tapatalk
After flashing CM7 I get the green boot screen, but my Nook also gets stuck on that loading screen.
When flashing CM9 I can press the ''N'' button and scroll the available boot methods, but when I choose one I get stuck on loading again.
So on both CMs I'm getting stucked on ''loading'', which started to happen on Monday after going from one of the openGL builds to the latest non-openGL build.
ryuz4ki said:
After flashing CM7 I get the green boot screen, but my Nook also gets stuck on that loading screen.
When flashing CM9 I can press the ''N'' button and scroll the available boot methods, but when I choose one I get stuck on loading again.
So on both CMs I'm getting stucked on ''loading'', which started to happen on Monday after going from one of the openGL builds to the latest non-openGL build.
Click to expand...
Click to collapse
Ok, that means that CWM is putting the boot files on the boot partition since they change CM7 vs CM9.
Which version is your CWM on the SD?
You can't boot to anything, not even emmc recovery? Or you just can't boot to 'normal'? Do you even have emmc recovery installed? If you don't, get the first file on this post and flash it with your CWM card. You may be in a recovery bootloop, without a recovery.
http://forum.xda-developers.com/showthread.php?p=21932561
Sent from my Nook Color running ICS and Tapatalk
Thank you leapinlar, seems like it was me having an old CWM on my boot card that wasn't helping me, installed the recovery zip and manage to boot into that from cyanoboot's loading screen and reflashed and managed to boot my Nook.
I'm still intrigue as to how this happened, do you think that when switching between openGL and non-openGL the boot partition got corrupted or something? I've been flashing many roms for almost a year and had never had this issue happen to me before.
Thanks a million for taking time to help me, you're a life saver.
ryuz4ki said:
Thank you leapinlar, seems like it was me having an old CWM on my boot card that wasn't helping me, installed the recovery zip and manage to boot into that from cyanoboot's loading screen and reflashed and managed to boot my Nook.
I'm still intrigue as to how this happened, do you think that when switching between openGL and non-openGL the boot partition got corrupted or something? I've been flashing many roms for almost a year and had never had this issue happen to me before.
Thanks a million for taking time to help me, you're a life saver.
Click to expand...
Click to collapse
It's possible your recovery somehow got corrupted during the flash. If that happens, it does not clear the recovery boot flag and it keeps trying to boot to recovery and it can't because it is corrupted. And it just bootloops forever.
Also, make sure your CWM bootable card is a recent version. If you have a newer nook and an old CWM and you try to clear data, it fails and you have a mess.
Hi, I am totally new at this but I been having a nook color for over a year now and been running CM7 on it for the longest time. Tonight I wanted to put CM9 on and for whatever I did now I just can't seem to get pass the Cyanoboot screen. Doesnt matter what I do it just gives me a blank screen and stays there. What do I gotta do to fix it or get rid of this cyanoboot and back to CWM so i can re flash everything. Any help would be great. Thanks
huyroy said:
Hi, I am totally new at this but I been having a nook color for over a year now and been running CM7 on it for the longest time. Tonight I wanted to put CM9 on and for whatever I did now I just can't seem to get pass the Cyanoboot screen. Doesnt matter what I do it just gives me a blank screen and stays there. What do I gotta do to fix it or get rid of this cyanoboot and back to CWM so i can re flash everything. Any help would be great. Thanks
Click to expand...
Click to collapse
Try flashing latest CM7 then CM9 over the top. Might want to format Data and wipe caches in between.
DizzyDen said:
Try flashing latest CM7 then CM9 over the top. Might want to format Data and wipe caches in between.
Click to expand...
Click to collapse
I cant flash anything right now. I cant go into CWM and it just stuck at the cyanoboot screen and whatever choice i pick from that screen will give me a blank screen.
huyroy said:
I cant flash anything right now. I cant go into CWM and it just stuck at the cyanoboot screen and whatever choice i pick from that screen will give me a blank screen.
Click to expand...
Click to collapse
Try using my bootable CWM card in my tips thread in my signature. It works fine under ordinary circumstances, but I have been wanting someone to try it to see if it gets you out of that bootloop.
Edit: Just a question out of curiosity. When you finished flashing that new ROM with your CWM, were you able to reboot from CWM normally using the menu choice? Or was there some lockup or something where you had to reboot from CWM by hard powering off?
leapinlar said:
Try using my bootable CWM card in my tips thread in my signature. It works fine under ordinary circumstances, but I have been wanting someone to try it to see if it gets you out of that bootloop.
Edit: Just a question out of curiosity. When you finished flashing that new ROM with your CWM, were you able to reboot from CWM normally using the menu choice? Or was there some lockup or something where you had to reboot from CWM by hard powering off?
Click to expand...
Click to collapse
I believe i had to powering off. I'm sorry but I didnt quite understand what you told me to do with the bootable CWM. I am fairly new to all this flashing ROMS crap. If u can explain it a lil bit better that would be greatly appreciated.
huyroy said:
I believe i had to powering off. I'm sorry but I didnt quite understand what you told me to do with the bootable CWM. I am fairly new to all this flashing ROMS crap. If u can explain it a lil bit better that would be greatly appreciated.
Click to expand...
Click to collapse
Just follow the directions in the thread to make the card. Then put it in the nook and try booting. If it boots to CWM, just use it to flash like DizzyDen said. And when you exit, use the menu to choose re-boot.
PS, the hard powering off caused the problem. CWM was not able to clear the recovery flag and you ended up in a recovery bootloop. Let me know if my card boots.
leapinlar said:
Just follow the directions in the thread to make the card. Then put it in the nook and try booting. If it boots to CWM, just use it to flash like DizzyDen said. And when you exit, use the menu to choose re-boot.
PS, the hard powering off caused the problem. CWM was not able to clear the recovery flag and you ended up in a recovery bootloop. Let me know if my card boots.
Click to expand...
Click to collapse
Ok I read the instruction, i know i gotta put the bootable CMW Recovery SD. you said the file is attached to the board... what board? where can i get this file? lol thanks
huyroy said:
Ok I read the instruction, i know i gotta put the bootable CMW Recovery SD. you said the file is attached to the board... what board? where can i get this file? lol thanks
Click to expand...
Click to collapse
Look at the link in my signature. If you read the instructions, scroll to the bottom. Attached to that post.
leapinlar said:
Look at the link in my signature. If you read the instructions, scroll to the bottom. Attached to that post.
Click to expand...
Click to collapse
I got it to work, thanks alot running 4.0.4 now. Slightly choppier than the CM7 I had on but whatever lol
huyroy said:
I got it to work, thanks alot running 4.0.4 now. Slightly choppier than the CM7 I had on but whatever lol
Click to expand...
Click to collapse
Thank YOU for testing my card and proving that gets you out of the recovery bootloop you were in.
You need to take one more step. You need to put a new CWM back on your internal memory so it is there ready for the next time you want to install a ROM. If you go back to my tips thread, there is a link to a new flashable CWM zip (version 5.5.0.4) that can be put on your internal memory. The link is in item B1. Just download that zip file, then boot one more time to my bootable CWM card and install that zip. You should not need my card anymore after that unless you get in a bootloop again.
I've had something similar going on. I believe my nook has been using the EMMC to boot. It was on CM7. I grabbed the latest open GL CM9 because I plan on giving this to my parents. I wanted them to be able to use the TWC TV/DVR app which only works on ICS. I am stuck in a loop where it keeps going to recovery and neither flashing cm9 again nor recovering to an old back up is working. Is the recovery SD card the suggested method for fixing this? I'm not stuck in a loop but I am stuck and having to go into recovery every boot.
For awhile, the N menu gave me both EMMC and SD card boot options. Now it only has EMMC ones.
NapalmDawn said:
I've had something similar going on. I believe my nook has been using the EMMC to boot. It was on CM7. I grabbed the latest open GL CM9 because I plan on giving this to my parents. I wanted them to be able to use the TWC TV/DVR app which only works on ICS. I am stuck in a loop where it keeps going to recovery and neither flashing cm9 again nor recovering to an old back up is working. Is the recovery SD card the suggested method for fixing this? I'm not stuck in a loop but I am stuck and having to go into recovery every boot.
For awhile, the N menu gave me both EMMC and SD card boot options. Now it only has EMMC ones.
Click to expand...
Click to collapse
You could try the new CWM SD. Just make sure when you finish using CWM to exit from that by using the 'reboot' choice in the menu. Do not just hard power off.
leapinlar said:
You could try the new CWM SD. Just make sure when you finish using CWM to exit from that by using the 'reboot' choice in the menu. Do not just hard power off.
Click to expand...
Click to collapse
So slap the image on a clean SD card and boot up from it. After it's done and I hit reboot, what would I do to get back to CM7 or CM9? I haven't had to do something like this yet. Any time I've had issues, I've been lucky enough to go back to a saved clockwork backup and restore things back to how they should be
NapalmDawn said:
So slap the image on a clean SD card and boot up from it. After it's done and I hit reboot, what would I do to get back to CM7 or CM9? I haven't had to do something like this yet. Any time I've had issues, I've been lucky enough to go back to a saved clockwork backup and restore things back to how they should be
Click to expand...
Click to collapse
First thing I would try is just to exit the new CWM via the menu to see if it gets you out of the bootloop. Retry booting without the SD in. If it will still only boot to recovery, I would again boot to my CWM and flash the new recovery to emmc. Next I would try to restore your old nandroid backup with the new CWM. If none of that works, flash a new CM to emmc with the new CWM.
Hey, i'm new. Just made this account to get help with my nook. Anyway i'll just tell you all what happened because i don't know much about it.
There's two problems i have with it. 1 - Can't sync my google account and 2 - Can't get past the boot animation, keeps re-booting
BTW just got the nook color second hand yesterday, he said it had Android 2.2? on it, not too sure. He also said he did a factory reset on it, hence me trying to link my google account etc. As of right now, i'm not sure if it is rooted or has a ROM? or anything, i just want it going again.
Problem 1 - It was going fine and I was setting it up with the android start up thingy on the screen, but no matter what I tried I couldn't sync my google account with it to get on the android store. I could go on the internet and gmail etc fine, just nothing that needed a google account synced. I tried the usual fix of signing into YouTube using the gmail account but this still didn't link the device to my google account.
Problem 2 - Just last night when I was reading a book on it, it shut off randomly, I thought thats odd because it was like half battery, so I plugged it in via usb. Now whenever I plug it in to usb. It reboots and reboots and reboots. It shows the touch the future of reading logo, then a grey n, then the screen flashes yellow for a split second. It goes to a screen saying it is installing a new software update, but would cut out part way through and re-start the reboot loop. When i unplug it from the power it shuts off and wont turn on. I tried a factory reset and this started, but when it finished 'clearing data' it cut out and restarted the boot loop. As i'm typing it's next to me continuously re-booting.
Please help!! I'm a noob and need guidance haha.
But seriously thanks to anyone who helps
Joel
It could be trying to do a self repair of / rom and failing. Read about that in my tips thread linked in my signature. Look at item A12.
leapinlar said:
It could be trying to do a self repair of / rom and failing. Read about that in my tips thread linked in my signature. Look at item A12.
Click to expand...
Click to collapse
Thanks for the reply. I think i've got nook version 1.1. thats what it said before it started the boot loop. I'm just wondering what i need to flash to the sd card?
Thanks
longschlongsilver said:
Thanks for the reply. I think i've got nook version 1.1. thats what it said before it started the boot loop. I'm just wondering what i need to flash to the sd card?
Thanks
Click to expand...
Click to collapse
Make yourself a bootable CWM card as in my item A10. Then you can flash whatever you want. A new stock 1.4.3 as I said in A12 or partition repairs as I said in my partition repair thread. Or CM roms. Or the romrestore repair zip. Lots of possibilities.
leapinlar said:
Make yourself a bootable CWM card as in my item A10. Then you can flash whatever you want. A new stock 1.4.3 as I said in A12 or partition repairs as I said in my partition repair thread. Or CM roms. Or the romrestore repair zip. Lots of possibilities.
Click to expand...
Click to collapse
So I make the CWM card. If i flash the stock 1.4.3 is that how it comes originally? Then can i root it from there, then CM7 etc? And is that all compatible with the 1.1 version? sorry for all the questions. and thanks so much! Any ideas on syncing a google account once i get it going?
Cheers
If you want to run stock, flash the 1.4.3 zip that I linked to. It is B&N's lastest version of stock (newer than 1.1) that I modified so it can be flashed with CWM. Then go to Manual Nooter 5.02.19. That will root you and allow you to install other apps.
Or if you want CM, just flash the version you want followed by the appropriate gapps zip. You do not need to update stock first, just flash away.
It is a good idea when switching types of roms to wipe first. You can flash my format 5,6,7 zip to wipe if you want.
Edit: After rereading your first post, you must get out of your bootloop before you can run anything. Just flashing a new rom may not fix it. If it does, great, but you may need to flash some repair zips first. And if you wipe, that may fix your Google login issues.
leapinlar said:
If you want to run stock, flash the 1.4.3 zip that I linked to. It is B&N's lastest version of stock (newer than 1.1) that I modified so it can be flashed with CWM. Then go to Manual Nooter 5.02.19. That will root you and allow you to install other apps.
Or if you want CM, just flash the version you want followed by the appropriate gapps zip. You do not need to update stock first, just flash away.
It is a good idea when switching types of roms to wipe first. You can flash my format 5,6,7 zip to wipe if you want.
Edit: After rereading your first post, you must get out of your bootloop before you can run anything. Just flashing a new rom may not fix it. If it does, great, but you may need to flash some repair zips first. And if you wipe, that may fix your Google login issues.
Click to expand...
Click to collapse
Sorry for my noobness but what does flash and wipe mean? Never done this before. I just got an sd card reader thing so i can write things on it with win32 disk imager. So to get out of the boot loop i have to flash? a repair zip? I had a look on the help post of yours, would 'NookColor-emmc-stockrecovery-CWM5504asAlt.zip' work? and do i write the whole zip file on the sd card without extracting anything? then what would i do? just turn it on? sorry once again you're a huge help
The first thing you do is unzip the file cwm-5.5.0.4-bootable_SD.zip. That will give a file about 200MB in size with a .img file name. Use win32diskimager to burn that .img file to your SD. Then that card can be used to copy (flash) things to your internal memory to either fix it or put new roms on it. If you put that card in the nook and boot up from a powered off state, the CWM program should start. You can use that to put new things on your internal memory.
Wipe means to format or erase things. Sometimes it is important to wipe what is already there before you try to put new things on.
Given your description of the problem, I would burn the CWM to SD, copy the zip named romrestore-CWMflashable.zip to the SD with your PC, put the SD in the nook, boot and the CWM menu should come up. Select "install zip from SD" and hit the n button. Then select "choose zip from SD" and hit n. Then scroll to the file you copied and hit n. Confirm the choice and CWM will begin it's thing. Watch for error messages. If it completes successfully, power off and remove the SD and see if it will boot. If it does boot successfully, you just repaired it. If it did not repair it, go to my partition repair thread and try some of those repair zips using the same technique.
If you were successful with the repairs, you can use the CWM SD to flash new roms to internal memory (stock or CM). Don't forget to wipe first if you do. An easy, surefire way to wipe is to flash my format 5-6-7 zip on my tips thread.
FIXED! Thanks so much. Gonna root now and then install cm7 or something haha, thanks again for your patience!