Database Users

boot loops upon reboot, NC 1.2, MN root

I have a NC 1.2. I am able to root using a CWM 3.0.2.8 Msd card with Manual Nooter no problem. The problem occurs when I shut it off and then reboot. It gets to the part where the words "Nook Color" start scrolling across the screen. "Nook Color" completes one time successfully and when it starts scrolling again, it stops halfway through the first "o" in "Color", and just repeats indefinitely. The only thing I could do is completely reset, eight failed boots. At first I thought it may be an older version of CWM on my Msd card so I made a new one with v. 3.0.2.8 and rooted successfully, but first time I shut it off and rebooted, it happened again. I am thinking only thing to do is never turn it off. Any ideas would be greatly appreciated.

reebz said:
I have a NC 1.2. I am able to root using a CWM 3.0.2.8 Msd card with Manual Nooter no problem. The problem occurs when I shut it off and then reboot. It gets to the part where the words "Nook Color" start scrolling across the screen. "Nook Color" completes one time successfully and when it starts scrolling again, it stops halfway through the first "o" in "Color", and just repeats indefinitely. The only thing I could do is completely reset, eight failed boots. At first I thought it may be an older version of CWM on my Msd card so I made a new one with v. 3.0.2.8 and rooted successfully, but first time I shut it off and rebooted, it happened again. I am thinking only thing to do is never turn it off. Any ideas would be greatly appreciated.
Click to expand...
Click to collapse
What version MN are you using? You’re not wiping anything when you flash MN, right?
reebz said:
…At first I thought it may be an older version of CWM on my Msd card so I made a new one with v. 3.0.2.8 and rooted successfully, but first time I shut it off and rebooted, it happened again. I am thinking only thing to do is never turn it off.
Click to expand...
Click to collapse
Are you saying that after you flash MN, you remove the SD card, it will fully boot up into the OS, then when you turn off the device and try to turn it back on, it will then not boot up? Or, are you saying that after you flash MN, you remove the SD card, and then the device fails to boot?
It sounds to me like you are wiping the system before you flash MN, but until I get the answers to the above questions, I can’t say for sure. MN is a add on pack for the stock OS, not a full rom, so you don’t wipe before you flash.

I have latest version of MN. I do not wipe anything. I boot into CWM and install MN with a msd card. Upon successful installation of MN, I remove msd card and reboot successfully that one time into a rooted NC. I can use Gmail app, download and install from both Android and Amazon markets. However, if I power down completely and reboot, it loops as explained in my OP.

reebz said:
I have latest version of MN. I do not wipe anything. I boot into CWM and install MN with a msd card. Upon successful installation of MN, I remove msd card and reboot successfully that one time into a rooted NC. I can use Gmail app, download and install from both Android and Amazon markets. However, if I power down completely and reboot, it loops as explained in my OP.
Click to expand...
Click to collapse
Are you updating Adobe Flash? You can't directly update Adobe Flash from the Nook Color. The most common issues that will cause a boot loop on a NC after having a fully working device, are installing the wrong kernel, and updating Adobe Flash from the Market. If you updated Adobe Flash, download the attached file, and flash with CWM. The file should delete the old flash player, and install the updated one. This should give you a working device again. If it does work for you, please report back here so others will know what the fix it.

GMPOWER said:
Are you updating Adobe Flash? You can't directly update Adobe Flash from the Nook Color. The most common issues that will cause a boot loop on a NC after having a fully working device, are installing the wrong kernel, and updating Adobe Flash from the Market. If you updated Adobe Flash, download the attached file, and flash with CWM. The file should delete the old flash player, and install the updated one. This should give you a working device again. If it does work for you, please report back here so others will know what the fix it.
Click to expand...
Click to collapse
I have updated Flash Player from the Market after rooting. If I remember correctly, I've powered down after rooting and installing numerous apps, including Flash, and rebooted . Maybe that's the culprit. I have not installed a different kernel. I'll go ahead and install the attached zip, with much thanks, but I don't know if I want to power off and reboot, for fear of dreaded boot loop.
Ok, I installed Flash Fix and rebooted, and the same boot loop is occurring. Looks like time to reset and reroot, and for now, never turn it off.

reebz said:
I have updated Flash Player from the Market after rooting. If I remember correctly, I've powered down after rooting and installing numerous apps, including Flash, and rebooted . Maybe that's the culprit. I have not installed a different kernel. I'll go ahead and install the attached zip, with much thanks, but I don't know if I want to power off and reboot, for fear of dreaded boot loop.
Ok, I installed Flash Fix and rebooted, and the same boot loop is occurring. Looks like time to reset and reroot, and for now, never turn it off.
Click to expand...
Click to collapse
I just realized that I missed a step in the install script for that file, that is why it did not work for you. Yes, adobe flash is your problem. To update Adobe Flash on the nook color, you have to uninstall the old version, and then install the new adobe flash.

For all future references, I have attached the working Adobe Flash fix file. It includes flash version 10.3.186.3, that was released today. It has been tested to work, and you can allow auto-update in the market without future problems.

Ok, thanks, I will reluctantly give this a try when I get home from work.
Edit: Ok, now. I'm trying to uninstall Flash Player and having difficulties. It doesn't show up in the app drawer, so I go to Market to see if there is an uninstall option, but there is only an update option, so I updated, and then uninstalled to see if that would work, but it still showed up in "my apps", in market. I opened up app drawer and selected manage apps and found it, but selecting the uninstall button does nothing. I then tried installing Titanium Backup and after installing, Titanium Backup won't open and doesn't even show up in my app drawer. So, I'm a little stymied now. Unsure what to do next

reebz said:
Ok, thanks, I will reluctantly give this a try when I get home from work.
Edit: Ok, now. I'm trying to uninstall Flash Player and having difficulties. It doesn't show up in the app drawer, so I go to Market to see if there is an uninstall option, but there is only an update option, so I updated, and then uninstalled to see if that would work, but it still showed up in "my apps", in market. I opened up app drawer and selected manage apps and found it, but selecting the uninstall button does nothing. I then tried installing Titanium Backup and after installing, Titanium Backup won't open and doesn't even show up in my app drawer. So, I'm a little stymied now. Unsure what to do next
Click to expand...
Click to collapse
Titanium Backup is going to be your best bet to do the uninstall process. When you selected update Flash from the market, then went and uninstalled it, you were only uninstalling the update. If TB installed, then it should show up in the app drawer of Zeam launcher. You can go into the market, and select to open it from there. Sometime it will not open on first attempt, because it is trying to ask you to give it root permission. If you still have trouble with it not opening, then uninstall it, and try to install it again. You can also open up the “Superuser” app to make sure that it has not been denied root permission.

TB definitely didn't appear in Zeam app drawer. I'm charging now and give it another shot in a bit.
Edit: Success. I got TB installed. I made a stupid error. I only installed the paid app, not the free also. I got Flash uninstalled and installed your Flash Fix.zip with numerous reboots with no boot loops.
GMPOWER, Thanks for your assistance

GMPOWER said:
For all future references, I have attached the working Adobe Flash fix file. It includes flash version 10.3.186.3, that was released today. It has been tested to work, and you can allow auto-update in the market without future problems.
Click to expand...
Click to collapse
I don't normally bump old threads, but this just saved me
Thanks a lot, I was at wits end figuring out why it was boot looping.

dreadwing said:
I don't normally bump old threads, but this just saved me
Thanks a lot, I was at wits end figuring out why it was boot looping.
Click to expand...
Click to collapse
Same here. Big thanks to GMPower! (My first post here, now I can use the Thanks button!)

Total noob question. This is my first time rooting. I got the root to work fine but updated Flash before finding out about the loop. I'm not sure what I'm supposed to do to fix this problem. OP in this thread said he reinstalled MN 4.6.16 via bootable SD with CWM and could get his nook to boot up. I tried that and rebooted but I'm still getting stuck in the loop.
Do I need to wipe my nook before reapplying MN?

dahcheet said:
Total noob question. This is my first time rooting. I got the root to work fine but updated Flash before finding out about the loop. I'm not sure what I'm supposed to do to fix this problem. OP in this thread said he reinstalled MN 4.6.16 via bootable SD with CWM and could get his nook to boot up. I tried that and rebooted but I'm still getting stuck in the loop.
Do I need to wipe my nook before reapplying MN?
Click to expand...
Click to collapse
Use the zip file in post #7 (in this thread). Drop it onto the same SD card you used to load MN 4.6.16. Put the SD card in and it'll boot to CWM....then flash that zip file the same way you flashed MN. Then, power off the NC, remove the CWM SD card and put in your regular SD and turn the NC back on. That should be it...no more boot loop.

I've got the same issue as the thread started and I downloaded the zip from post 7 and flashed it just like I flashed MN, but it's still boot looping. It gets a bit farther into the "Nook Color" logo but keeps repeating.

Boot Loops NC 1.3
GMPOWER said:
For all future references, I have attached the working Adobe Flash fix file. It includes flash version 10.3.186.3, that was released today. It has been tested to work, and you can allow auto-update in the market without future problems.
Click to expand...
Click to collapse
This problem started for me on Rooted 1.3. October 5th, Applied this fix.
Thanks GMPOWER

I figure I will explain my problem in more detail. I am working with my girlfriend's Nook trying to get it rooted. The first time I did she had 1.2 stock and I rooted it successfully. She updated flash not knowing that it would cause a boot loop. I had no idea how to fix it so she set it back to factory settings and procedded to update to 1.3 to see if that would solve the boot loop. I rooted it again and it started boot looping again. I found this thread and the flash fix. I flashed it onto the Nook and it fixed the loop problem.
Well she found out that the marketplace has limited visibility with 1.3 and wanted to go back to 1.2 to have her full visibility back. So she factory reset it again, I rooted it again and it started boot looping again. This time though the fix from post 7 isn't helping. I flash it and then reboot and it loads the "Nook Color" logo once fully and then stops and starts it over again and gets stuck at "Nook Col".
Is there anyone who might be able to help me with what the problem is, or am I gonna have to reset it back to stock, use Titanium Backup to remove flash and then use the zip from post 7? I know that it's not a root problem because I successfully rooted my mom's Nook before my girlfriends and her's is working fine.

Followed your instructions and my problem solved, many thanks!
johnny15 said:
Use the zip file in post #7 (in this thread). Drop it onto the same SD card you used to load MN 4.6.16. Put the SD card in and it'll boot to CWM....then flash that zip file the same way you flashed MN. Then, power off the NC, remove the CWM SD card and put in your regular SD and turn the NC back on. That should be it...no more boot loop.
Click to expand...
Click to collapse

my first post. thanks GMpower

just had this happen to me too. I've tried the flash update, and I get slightly more of the nook color boot graphic but it still hangs.
any thoughts?

[Q] Reverted NC won't update to latest

I rooted my NC ages ago, first on 1.1 then on 1.2. When I updated to 1.3 (from reverted stock) I used the manual nooter to root it and that's where I've been for awhile.
I finally decided to update to 1.4.1, so I used the erase & deregister function, rebooted it, reregistered, and it's working fine, looking like a stock 1.3 device.
However, I can't get it to update to 1.4.1. First I tried using the manually downloaded update file from B&N's website. It didn't do its thing automagically when I followed the instructions on their site, so I searched various forums and found all sorts of suggestions on what to do.
None of them worked, including redownloading it from the NC itself and moving it to root, and renaming it to the old format "Sideload_update.zip".
Then I tried to just leave it on wifi for a couple hours and see if it would update that way. So far no luck.
Any suggestions on why it's not updating?

Do you have clockwork installed? It will block the update.
Sent from space

koopakid08 said:
Do you have clockwork installed? It will block the update.
Click to expand...
Click to collapse
I did at one time, but I thought I got rid of it with one of the erase/deregisters. If that's not the case, how do I get rid of it?

Philomorph said:
I did at one time, but I thought I got rid of it with one of the erase/deregisters. If that's not the case, how do I get rid of it?
Click to expand...
Click to collapse
Do you see CWR on your screen when you boot into recovery? If you do, you still have it on there and stock updates will not work whether you side load or wait for the OTA update (which has maybe just started now depending on how low your serial number is).
For a full recovery you could create a bootable card with CWR on it and after wiping everything install the stock 1.3 ROM found here: http://www.multiupload.com/3Y5MWE773D

[Q] Nook stock firmware 1.4.3?

Just read there is a new update for stock Nooks... basically gives more comic-reading options.
I currently have a rooted Nook color and don't really see any real reason to want the latest Nook update, but did want to ask: What would happen if i did update? Would I need to root again afterwards?
I know there's guides on previous versions of Nook, but was wondering if anyone had experience yet w/ the latest update.

I just downloaded it to look at it. It is a complete reflash of your ROM. So my guess is it will undo root. And this from B&N:
The NOOK Color Ver1.4.3 update contains new features and enhancements, including:
• Zoom view in comics and graphic novels
• 2-Page mode in landscape for viewing PagePerfect™ and PDF documents
• Other minor system enhancements
Sent from my Nook Color running ICS and Tapatalk

Thanks for the reply, very helpful!

Mine just automatically updated to 1.4.3. When I boot up it asks if I want to go to the normal home or the rooted home. I can go to the rooted home and my apps are there but I can't launch Google Play. Also, if I select the N button and then Home it just goes back to the default Nook home and I can't switch back to the rooted home. I have to restart the Nook to get back.
I'm going to try nooting it again to see if that corrects the issue.

thegraak said:
Mine just automatically updated to 1.4.3. When I boot up it asks if I want to go to the normal home or the rooted home. I can go to the rooted home and my apps are there but I can't launch Google Play. Also, if I select the N button and then Home it just goes back to the default Nook home and I can't switch back to the rooted home. I have to restart the Nook to get back.
I'm going to try nooting it again to see if that corrects the issue.
Click to expand...
Click to collapse
I'm in the same state. One of my two Nook Colors auto-updated to 1.4.3 and I'm having the exact same symptoms. The other hasn't yet updated and still works fine. Please share your results

Update:
I used clockworkmod 3.2.0.1 and manualnooter 5.02.19. I reinstalled manualnooter without wiping the Nook and I am back in business on both of them

"back in business on both of them"
Including the google app marketplace? Super cool - the market (and gapps in general) require some things to be in /system to hook into to handshake with the Google servers.
I threw together a super minimal "install su and busybox" rooting tool that lets all of my apps run as I prefer but doesn't include the Market. Nice to know I'll be able to get the Market back as soon as I like.

thegraak said:
Mine just automatically updated to 1.4.3. When I boot up it asks if I want to go to the normal home or the rooted home. I can go to the rooted home and my apps are there but I can't launch Google Play. Also, if I select the N button and then Home it just goes back to the default Nook home and I can't switch back to the rooted home. I have to restart the Nook to get back.
I'm going to try nooting it again to see if that corrects the issue.
Click to expand...
Click to collapse
This is why you're supposed to disable OTA updates when you Root a Device. Otherwise your device will update without your permission or foreknowledge. Usually it'll reset everything in System so you'll loose things like Root and Gapps.
Personally I just run CM9 off my 16gb class 10 SDcard. No OTAs to worry about and I get pure Android, all without modifying any of the Nook's Internal Memory.

roustabout said:
"back in business on both of them"
Including the google app marketplace? Super cool - the market (and gapps in general) require some things to be in /system to hook into to handshake with the Google servers.
I threw together a super minimal "install su and busybox" rooting tool that lets all of my apps run as I prefer but doesn't include the Market. Nice to know I'll be able to get the Market back as soon as I like.
Click to expand...
Click to collapse
Yup, everything works fine. I was able to install a new app after the update from the Play store

I've been out of the loop for awhile but need to restore my NC to stock to sell it. What's the easiest way to do it? I'm currently running an older version of ICS from cyanogen. Help?

eyecrispy said:
I've been out of the loop for awhile but need to restore my NC to stock to sell it. What's the easiest way to do it? I'm currently running an older version of ICS from cyanogen. Help?
Click to expand...
Click to collapse
Download the latest update from B&N, download the CWM 3.2.0.1 SD Card Image from here, create a CWM uSD Bootable using Win32 Image Writer, link here, load the downloaded Update file from B&N into the uSD, turn on/reboot NC, clear System, Data, Cache, install the update.

thewaywardgeek013 said:
Download the latest update from B&N, download the CWM 3.2.0.1 SD Card Image from here, create a CWM uSD Bootable using Win32 Image Writer, link here, load the downloaded Update file from B&N into the uSD, turn on/reboot NC, clear System, Data, Cache, install the update.
Click to expand...
Click to collapse
You forgot a very important part... follow the first portion of the Customize ROMs thread in my signature... B&N stock is not CWM flashable until the first edit in that thread is made.

DizzyDen said:
You forgot a very important part... follow the first portion of the Customize ROMs thread in my signature... B&N stock is not CWM flashable until the first edit in that thread is made.
Click to expand...
Click to collapse
Thanks for correcting me there, thought that it was possible already to install it thru CWM…

bigdweeb said:
Update:
I used clockworkmod 3.2.0.1 and manualnooter 5.02.19. I reinstalled manualnooter without wiping the Nook and I am back in business on both of them
Click to expand...
Click to collapse
I tried this and I cannot access the market. I had a stock unrooted 1.4.2 and then rooted using mn 5.02.19 on CWM 3.2.0.1
My device is rooted but the Market will not download apps. I have followed the guides to clearing the Vending.apk cache and Google Framework Services here: http://forum.xda-developers.com/showthread.php?t=1494901 but Market is not updating and I cannot install apps.
Even after flashing the two files here: http://bookclubs.barnesandnoble.com...tock/m-p/1356004/message-uid/1356004#U1356004 and then re-flashing MN 5.02.19 I just have root.
Currently I have the standard/stock build.prop. I can push files to /system/app and /data/app but that is getting old. And so far no combination of checking or unchecking the NookTools toolbox is letting me install apps via Market.
Any help would be greatly appreciated!

tigger2u said:
I tried this and I cannot access the market. I had a stock unrooted 1.4.2 and then rooted using mn 5.02.19 on CWM 3.2.0.1
My device is rooted but the Market will not download apps. I have followed the guides to clearing the Vending.apk cache and Google Framework Services here: http://forum.xda-developers.com/showthread.php?t=1494901 but Market is not updating and I cannot install apps.
Even after flashing the two files here: http://bookclubs.barnesandnoble.com...tock/m-p/1356004/message-uid/1356004#U1356004 and then re-flashing MN 5.02.19 I just have root.
Currently I have the standard/stock build.prop. I can push files to /system/app and /data/app but that is getting old. And so far no combination of checking or unchecking the NookTools toolbox is letting me install apps via Market.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
Under the "Let's get started:' section in the MN 5.2.19 OP thread, perform step #14, let Market update by waiting patiently for some time.
Check comment #216 in that thread from reebz which he resolved a problem like yours.

8GB 1.4.3 Nook Tablet Root?
So I am really new to this whole idea of rooting but I was wondering if anyone has found a reliable way to root the new (1.4.3) nook tablet? PLEASE!

Error message
DizzyDen said:
You forgot a very important part... follow the first portion of the Customize ROMs thread in my signature... B&N stock is not CWM flashable until the first edit in that thread is made.
Click to expand...
Click to collapse
I have downloaded the update twice from B&N and copied it to the sd card root. Keep getting a message when I try to install the update, using your instructions, that it can't open the archive (bad).
I am trying your method because I can't get the Nook to update normally. I even followed the default NookColor reset instructions then tried to install the update. The update would never even start. Currently sitting at 1.3.0. So I decided to try this CW mod route. More problems...
This update process is getting so frustrating...... I must assume at this point that the archive is bad again. Tried using both IE and Firefox (heard FF causes problems). The CW boot process worked fine so that's not it.
Not sure what more I can do.

Psyphurr said:
I have downloaded the update twice from B&N and copied it to the sd card root. Keep getting a message when I try to install the update, using your instructions, that it can't open the archive (bad).
I am trying your method because I can't get the Nook to update normally. I even followed the default NookColor reset instructions then tried to install the update. The update would never even start. Currently sitting at 1.3.0. So I decided to try this CW mod route. More problems...
This update process is getting so frustrating...... I must assume at this point that the archive is bad again. Tried using both IE and Firefox (heard FF causes problems). The CW boot process worked fine so that's not it.
Not sure what more I can do.
Click to expand...
Click to collapse
You can't edit the zip with archive software. You must entirely extract it, then edit the files, then rezip and re-sign the zip.
To save you the effort, I made a version of 1.4.3 that is CWM flashable and posted it. See my tips thread linked in my signature. See item A12.

I'm using CM10 internally. Do I need to update to firmware v1.43 or not needed anymore?

carlo.edmon said:
I'm using CM10 internally. Do I need to update to firmware v1.43 or not needed anymore?
Click to expand...
Click to collapse
Not needed.

Nook wont boot up

Hey, i'm new. Just made this account to get help with my nook. Anyway i'll just tell you all what happened because i don't know much about it.
There's two problems i have with it. 1 - Can't sync my google account and 2 - Can't get past the boot animation, keeps re-booting
BTW just got the nook color second hand yesterday, he said it had Android 2.2? on it, not too sure. He also said he did a factory reset on it, hence me trying to link my google account etc. As of right now, i'm not sure if it is rooted or has a ROM? or anything, i just want it going again.
Problem 1 - It was going fine and I was setting it up with the android start up thingy on the screen, but no matter what I tried I couldn't sync my google account with it to get on the android store. I could go on the internet and gmail etc fine, just nothing that needed a google account synced. I tried the usual fix of signing into YouTube using the gmail account but this still didn't link the device to my google account.
Problem 2 - Just last night when I was reading a book on it, it shut off randomly, I thought thats odd because it was like half battery, so I plugged it in via usb. Now whenever I plug it in to usb. It reboots and reboots and reboots. It shows the touch the future of reading logo, then a grey n, then the screen flashes yellow for a split second. It goes to a screen saying it is installing a new software update, but would cut out part way through and re-start the reboot loop. When i unplug it from the power it shuts off and wont turn on. I tried a factory reset and this started, but when it finished 'clearing data' it cut out and restarted the boot loop. As i'm typing it's next to me continuously re-booting.
Please help!! I'm a noob and need guidance haha.
But seriously thanks to anyone who helps
Joel

It could be trying to do a self repair of / rom and failing. Read about that in my tips thread linked in my signature. Look at item A12.

leapinlar said:
It could be trying to do a self repair of / rom and failing. Read about that in my tips thread linked in my signature. Look at item A12.
Click to expand...
Click to collapse
Thanks for the reply. I think i've got nook version 1.1. thats what it said before it started the boot loop. I'm just wondering what i need to flash to the sd card?
Thanks

longschlongsilver said:
Thanks for the reply. I think i've got nook version 1.1. thats what it said before it started the boot loop. I'm just wondering what i need to flash to the sd card?
Thanks
Click to expand...
Click to collapse
Make yourself a bootable CWM card as in my item A10. Then you can flash whatever you want. A new stock 1.4.3 as I said in A12 or partition repairs as I said in my partition repair thread. Or CM roms. Or the romrestore repair zip. Lots of possibilities.

leapinlar said:
Make yourself a bootable CWM card as in my item A10. Then you can flash whatever you want. A new stock 1.4.3 as I said in A12 or partition repairs as I said in my partition repair thread. Or CM roms. Or the romrestore repair zip. Lots of possibilities.
Click to expand...
Click to collapse
So I make the CWM card. If i flash the stock 1.4.3 is that how it comes originally? Then can i root it from there, then CM7 etc? And is that all compatible with the 1.1 version? sorry for all the questions. and thanks so much! Any ideas on syncing a google account once i get it going?
Cheers

If you want to run stock, flash the 1.4.3 zip that I linked to. It is B&N's lastest version of stock (newer than 1.1) that I modified so it can be flashed with CWM. Then go to Manual Nooter 5.02.19. That will root you and allow you to install other apps.
Or if you want CM, just flash the version you want followed by the appropriate gapps zip. You do not need to update stock first, just flash away.
It is a good idea when switching types of roms to wipe first. You can flash my format 5,6,7 zip to wipe if you want.
Edit: After rereading your first post, you must get out of your bootloop before you can run anything. Just flashing a new rom may not fix it. If it does, great, but you may need to flash some repair zips first. And if you wipe, that may fix your Google login issues.

leapinlar said:
If you want to run stock, flash the 1.4.3 zip that I linked to. It is B&N's lastest version of stock (newer than 1.1) that I modified so it can be flashed with CWM. Then go to Manual Nooter 5.02.19. That will root you and allow you to install other apps.
Or if you want CM, just flash the version you want followed by the appropriate gapps zip. You do not need to update stock first, just flash away.
It is a good idea when switching types of roms to wipe first. You can flash my format 5,6,7 zip to wipe if you want.
Edit: After rereading your first post, you must get out of your bootloop before you can run anything. Just flashing a new rom may not fix it. If it does, great, but you may need to flash some repair zips first. And if you wipe, that may fix your Google login issues.
Click to expand...
Click to collapse
Sorry for my noobness but what does flash and wipe mean? Never done this before. I just got an sd card reader thing so i can write things on it with win32 disk imager. So to get out of the boot loop i have to flash? a repair zip? I had a look on the help post of yours, would 'NookColor-emmc-stockrecovery-CWM5504asAlt.zip' work? and do i write the whole zip file on the sd card without extracting anything? then what would i do? just turn it on? sorry once again you're a huge help

The first thing you do is unzip the file cwm-5.5.0.4-bootable_SD.zip. That will give a file about 200MB in size with a .img file name. Use win32diskimager to burn that .img file to your SD. Then that card can be used to copy (flash) things to your internal memory to either fix it or put new roms on it. If you put that card in the nook and boot up from a powered off state, the CWM program should start. You can use that to put new things on your internal memory.
Wipe means to format or erase things. Sometimes it is important to wipe what is already there before you try to put new things on.
Given your description of the problem, I would burn the CWM to SD, copy the zip named romrestore-CWMflashable.zip to the SD with your PC, put the SD in the nook, boot and the CWM menu should come up. Select "install zip from SD" and hit the n button. Then select "choose zip from SD" and hit n. Then scroll to the file you copied and hit n. Confirm the choice and CWM will begin it's thing. Watch for error messages. If it completes successfully, power off and remove the SD and see if it will boot. If it does boot successfully, you just repaired it. If it did not repair it, go to my partition repair thread and try some of those repair zips using the same technique.
If you were successful with the repairs, you can use the CWM SD to flash new roms to internal memory (stock or CM). Don't forget to wipe first if you do. An easy, surefire way to wipe is to flash my format 5-6-7 zip on my tips thread.

FIXED! Thanks so much. Gonna root now and then install cm7 or something haha, thanks again for your patience!

[Q] Eyeballer mostly working, Gapps not working

I installed CM9 Eyeballer the other day on my NC. It pretty much works, but if I go into the web browser or any other factory-installed app, hitting the "N" button takes me back to the factory-installed home screen, and I can't find any way to get back to the Android home screen, short of rebooting the device. Is this normal?
Also, I flashed Gapps using gapps-20120429-ics-signed.zip, and the only Google App that appears is Play Store -- I was able to sign in, but the next screen gave me a "Server Error," and that's all it's done since. I verified the md5sum, and also tried again to install it. No change. Is there some version conflict, or something like that?
Edit: did not install CM9, after all. I now have.

What is the 'factory installed home screen'? You mean stock? That is not possible if you installed CM9 over the top of stock on emmc. Can you explain a little more how you installed it and what you mean.

Well...
I followed the directions as closely as I could: create a recovery chip, copy over the zip file (manualnooter-5.08.20-apps2sd.zip), reboot, install from zip file, install Manual Nooter, flash update-Froyo1.2-dalingrin-OC-emmc-090111.zip, install Gapps, reboot again. As far as I could tell, my results were consistent with the directions, up until the symptoms I described. For example, the splash (smash) screen is right, and the rainbow-y thing, and so on.
This partial success is even more frustrating than a total failure.

estebandido said:
I followed the directions as closely as I could: create a recovery chip, copy over the zip file (manualnooter-5.08.20-apps2sd.zip), reboot, install from zip file, install Manual Nooter, flash update-Froyo1.2-dalingrin-OC-emmc-090111.zip, install Gapps, reboot again. As far as I could tell, my results were consistent with the directions, up until the symptoms I described. For example, the splash (smash) screen is right, and the rainbow-y thing, and so on.
This partial success is even more frustrating than a total failure.
Click to expand...
Click to collapse
Your original post said you installed CM9. You did not. You just rooted your stock rom. You might want to edit the title of the post to 'Manual Nooter installed properly, Gapps not working. Then take that CM9 Eyeballer statement out of the text in the first post and you might get some proper responses from folks.

Sure enough.
leapinlar said:
Your original post said you installed CM9. You did not. You just rooted your stock rom.
Click to expand...
Click to collapse
Ah... I was under the impression that Eyeballer was a version name of CM9. None of the sets of instructions I read made it clear to me that wasn't the case.
I ended up doing a factory reset, then reinstalling everything. The picture is far rosier now -- it finally looks the way I pictured!
Thanks!

estebandido said:
Ah... I was under the impression that Eyeballer was a version name of CM9.
Click to expand...
Click to collapse
Eyeballer does build a version of CM9. But that has nothing to do with what you did. You ran Manual Nooter, which is a tool to root your stock installation. CM9 is a completely different version of Android than stock is. And when you install CM9, your stock is completely removed and replaced by CM9.
You do not have CM9 installed, you have just rooted your stock rom.
Anyway, I'm glad you got it working.
Edit: I see you modified your original post to say you did later install CM9.

[ROM][NC] Unofficial CM9 Nightly builds - with/without OpenGL
I don't have enough posts in XDA to post in the (goo dot gl/vPJcM) actual ROM thread so I'm hoping someone will see it here.
After installing the CM7 ROM a long time ago. they Nook wasn't able to boot into CWM. I can only access the recovery using a bootable SD card. That may or may not matter.
Yesterday I installed both the 3 SEP OpenGL and 4 SEP versions of Eyeballers CM9 ROM along with GAPPS. In both versions I cannot get bast the Setup Wizard since it "unfortunately Closed" every time I "touch the Android".
I did install the ROM w/o GAPPS as a temporary fix but will need to eventually access the Play Store.
I did notice that CWM still wont boot into recovery and the Cyanoboot won't either. Cyanoboot takes me to what appears to be a stock Nook screen claiming that an install has failed and that I should power on/off or contact customer service.
Does anybody have any suggestions?
Thanks!
JC

jerrycrabb said:
I did notice that CWM still wont boot into recovery and the Cyanoboot won't either. Cyanoboot takes me to what appears to be a stock Nook screen claiming that an install has failed and that I should power on/off or contact customer service.
Click to expand...
Click to collapse
You do not have CWM installed on internal memory (emmc). That message you are getting means you still have the stock recovery there. You need to flash a CWM to emmc using your bootable CWM card. Look in my tips thread linked in my signature. Look at item A8 and the subheading 'to fix a corrupted or missing recovery on emmc'.
I don't know how to solve your other problem with gapps, other than to do a factory reset with CWM.

From what I can tell, Eyeballer is mostly drinking.

leapinlar said:
You do not have CWM installed on internal memory (emmc). That message you are getting means you still have the stock recovery there. You need to flash a CWM to emmc using your bootable CWM card. Look in my tips thread linked in my signature. Look at item A8 and the subheading 'to fix a corrupted or missing recovery on emmc'.
I don't know how to solve your other problem with gapps, other than to do a factory reset with CWM.
Click to expand...
Click to collapse
Thank you very much for the response, I will try this as soon as I get some time (I have a selfish new baby) and get back.

leapinlar said:
You do not have CWM installed on internal memory (emmc). That message you are getting means you still have the stock recovery there. You need to flash a CWM to emmc using your bootable CWM card. Look in my tips thread linked in my signature. Look at item A8 and the subheading 'to fix a corrupted or missing recovery on emmc'.
I don't know how to solve your other problem with gapps, other than to do a factory reset with CWM.
Click to expand...
Click to collapse
Success! errr..sort of.
Prior to flashing gapps I was able to reboot into CWM. Thank you so much for your help!
Still having the same issue with setup manager after factory reset and wipe of all cache.
If anyone has a work around or another suggestions for CM9 on the NC I'd much appreciate it.
Thanks again.