DEFY+ BL7 Root problem - Defy Q&A, Help & Troubleshooting

Hello,
I encounter a problem trying to root my defy+.
I've followed the information provided here : http://forum.xda-developers.com/showthread.php?t=1542956 (Thread :
DFP-188, DFP-231, DFP-2311 BL7 Finally Rooted).
What i've done :
Step 1 ("Wipe phone twice") => OK
Step 2 ("Flash 4.5.1-134 DFP-231 CN or 4.5.1-134 DFP-231 Retail.en.EU CEE") => KO...
...the result is the same with both versions CN & EU, after the phone is rebooted by rsd lite, i see the M logo then the following error : err:a5,69,35,00,27.
I could make it work again flashing the version marked "Retail French" (DEFYPLUS_U3_4.5.1-134_DFP-231_BLUR_SIGN_USADEFYEMARAB1B8RTFR004.0R_PDS03C_USAJRDNGIBRRTFR_P020_A024_M002_Service1FF.sbf.gz), but of course not rooted.
I tried from 3 different computers, re-downloading the sbf every time, different usb cables, different rsdlite versions....always the same result.
I hope someone will have a solution for this problem, or a way of investigating on this issue.
Here are the current information of my phone :
System : 45.0.2310.MB526.Retail.en.FR
Model : MB526
Android Version : 2.3.6
Baseband : EPU93_U_00.60.03
Kernel version : 2.6.32.9-ge281b6e [email protected] #1
Build number : 4.5.1-134_DFP-231
Thank you.

I having successfully rooted and installed ICS on my defy plus having BL7. I have followed the guide provided in this forum -
http://forum.xda-developers.com/showthread.php?t=1595013
Following are the links from that forum itself, which I followed to root my defy plus (to save your time, but read the forum once).
https://www.dropbox.com/sh/aucmzwd8nk5eeaz/zOCaGf2a1w/BL7 Root (to download the sbf files)
http://forum.xda-developers.com/showthread.php?t=1595013&page=9#88 (step by step procedure for rooting)

thanks for your answer, but these guides & binaries are the same as one provided in the link i put.
I really read ALL forum information here i could before posting this question.

Sorry, I didn't check that. There might be some problem with the sbf itself, there were several users reporting the problem in that forum. Try to download the sbf from the location which I gave to you. Yesterday, I unrooted my phone and install the official stock ROM for my defy plus, because I have to give my phone to service center again. I tried around five ROM before actually getting the phone work. You can give a try once more.

Check out easyrecovery in the defy dev forum.

addictedboy said:
Sorry, I didn't check that. There might be some problem with the sbf itself, there were several users reporting the problem in that forum. Try to download the sbf from the location which I gave to you. Yesterday, I unrooted my phone and install the official stock ROM for my defy plus, because I have to give my phone to service center again. I tried around five ROM before actually getting the phone work. You can give a try once more.
Click to expand...
Click to collapse
the file DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARA...0_Service1FF.sbf.gz in the link you provided me is marked as corrupted (downloaded twice, tried to open it with 7zip and winrar)
juried said:
Check out easyrecovery in the defy dev forum.
Click to expand...
Click to collapse
Thank you for pointing me this method i hadn't seen, but i don't have better results just a new error message : Err:A5,70,00,00,2F (i can't post it to the easyrecovery thread...too young member). i could still go back to my stock rom.

twice
cromfr said:
the file DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARA...0_Service1FF.sbf.gz in the link you provided me is marked as corrupted (downloaded twice, tried to open it with 7zip and winrar)
Thank you for pointing me this method i hadn't seen, but i don't have better results just a new error message : Err:A5,70,00,00,2F (i can't post it to the easyrecovery thread...too young member). i could still go back to my stock rom.
Click to expand...
Click to collapse
I use that file downloaded twice and it works allways...

horacioxavier said:
I use that file downloaded twice and it works allways...
Click to expand...
Click to collapse
The file i get as corrupted is the one from the second link (dropbox place : https://www.dropbox.com/sh/aucmzwd8nk5eeaz/zOCaGf2a1w/BL7 Root)
The first link ( thread "[success!]defy bl7 root! " http://forum.xda-developers.com/showthread.php?t=1595013), points to the same file (http://sbf.droid-developers.org/umt..._USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf.gz) linked by the thread i used in the first place. Still i redownloaded and made a comparaison with the one i previously downladed & test => perfect match

try this
cromfr said:
The file i get as corrupted is the one from the second link (dropbox place : https://www.dropbox.com/sh/aucmzwd8nk5eeaz/zOCaGf2a1w/BL7 Root)
The first link ( thread "[success!]defy bl7 root! " http://forum.xda-developers.com/showthread.php?t=1595013), points to the same file (http://sbf.droid-developers.org/umt..._USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf.gz) linked by the thread i used in the first place. Still i redownloaded and made a comparaison with the one i previously downladed & test => perfect match
Click to expand...
Click to collapse
try this files:
Wipe Data/Cache in stock recovery
flash:
4.5.1-134 DFP-231 Retail.en.EU CEE
then: Wipe Data/Cache in stock recovery
flash the root whit this.
4.5.1-134 DFP-231 Retail.en.EU CEE Rooted SBF

horacioxavier said:
try this files:
Wipe Data/Cache in stock recovery
flash:
4.5.1-134 DFP-231 Retail.en.EU CEE
then: Wipe Data/Cache in stock recovery
flash the root whit this.
4.5.1-134 DFP-231 Retail.en.EU CEE Rooted SBF
Click to expand...
Click to collapse
They are the files from the thread "DFP-188, DFP-231, DFP-2311 BL7 Finally Rooted", that i tried in the first place (cf my 1st post).
Moreover, a friend of mine, who has the defy+ too, successfully rooted his phone this way and couldn't do more than i did on my defy+.
I was wondering if a rooted sbf for my stock rom version (retail french) allready exists, and if not how possible i can create such a thing ? (unless someone tells me i go in a bad direction)

ok
cromfr said:
They are the files from the thread "DFP-188, DFP-231, DFP-2311 BL7 Finally Rooted", that i tried in the first place (cf my 1st post).
Moreover, a friend of mine, who has the defy+ too, successfully rooted his phone this way and couldn't do more than i did on my defy+.
I was wondering if a rooted sbf for my stock rom version (retail french) allready exists, and if not how possible i can create such a thing ? (unless someone tells me i go in a bad direction)
Click to expand...
Click to collapse
yes I rooted several times my defy+ (because I'm having trouble whit thw camera) with the 2 firmwares on that thread. your phone it's unlocked? it's retail?

horacioxavier said:
yes I rooted several times my defy+ (because I'm having trouble whit thw camera) with the 2 firmwares on that thread. your phone it's unlocked? it's retail?
Click to expand...
Click to collapse
Yes it's unlocked (i allready used it with different phone companies, in france & abroad) and retail (i have the box under my eyes written "Type : MVQ7 - 334411D11 (Retail)" and the system string "45.0.2310.MB526.Retail.en.FR" seems to confirm that point)

cromfr said:
the file DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARA...0_Service1FF.sbf.gz in the link you provided me is marked as corrupted (downloaded twice, tried to open it with 7zip and winrar)
Click to expand...
Click to collapse
I think there might be some problem with the name of the zip in windows(characters limit for naming the folder). Are you using windows? Since I faced the same thing with other ROMs for my Galaxy device. Use Ubuntu or rename the zip file.

addictedboy said:
I think there might be some problem with the name of the zip in windows(characters limit for naming the folder). Are you using windows? Since I faced the same thing with other ROMs for my Galaxy device. Use Ubuntu or rename the zip file.
Click to expand...
Click to collapse
I'm using windows and had read about the potential long name problem so i allready made the test renaming to a.zip

cromfr said:
I'm using windows and had read about the potential long name problem so i allready made the test renaming to a.zip
Click to expand...
Click to collapse
What error does winrar throws while extracting? I will try to upload the files somewhere in the cloud, which I used for my device and will give you the link tomorrow.

addictedboy said:
What error does winrar throws while extracting? I will try to upload the files somewhere in the cloud, which I used for my device and will give you the link tomorrow.
Click to expand...
Click to collapse
It was a crc error, and winrar like 7zip announce a sbf file decompresed size of 3.6Gb....which looked strange even before trying to extract.

cromfr said:
It was a crc error, and winrar like 7zip announce a sbf file decompresed size of 3.6Gb....which looked strange even before trying to extract.
Click to expand...
Click to collapse
Yesterday, I downloaded the file and try to extract it, I also got the same error. I am still searching for some place to upload the sbf file, which I downloaded few weeks before that are working.

addictedboy said:
Yesterday, I downloaded the file and try to extract it, I also got the same error. I am still searching for some place to upload the sbf file, which I downloaded few weeks before that are working.
Click to expand...
Click to collapse
I can suggest you dl.free.fr

cromfr said:
I can suggest you dl.free.fr
Click to expand...
Click to collapse
I tried it, but after few minutes it gives server error. However, I am uploading the files somewhere else. It will hardly take 30 mins. I will reply again when everything is ready with the link.
---------- Post added at 02:05 PM ---------- Previous post was at 01:11 PM ----------
40% Completed for both files.

addictedboy said:
I tried it, but after few minutes it gives server error. However, I am uploading the files somewhere else. It will hardly take 30 mins. I will reply again when everything is ready with the link.
---------- Post added at 02:05 PM ---------- Previous post was at 01:11 PM ----------
40% Completed for both files.
Click to expand...
Click to collapse
Some problem occurred during transfer, re-uploading it. 10%...done.

Related

[HELP] Milestone 2 bricked (SBF Not Working, No Recovery, No Battery Charge)

Hey i will try to be as precise as possible. I'm posting in this section because in the general section the help isn't as effective as here.
Here is my problem:
A few days ago i flashed GB MIUI on my Milestone 2 everything worked perfectly and i used the phone a whole day. That night i've put the phone to charge and went to bed. Il the morning when i push the power button the phone didn't boot. I was stuck at the first M bootscreen (Red at the time).
I wasn't able to do anything no recovery the phone didn't seem to be charging so i decided to flash Stock FR SBF (One i used many times)
Once completed i let the phone tying to Boot for about one hour. After that i pulled the battery out and tried to get to recovery but no success. Holding the X button while booting wasn't getting me to recovery because the wouldn't get pass the First Moto bootscreen (Recovery open after that).
So i've flashed since then a handful of SBF from and-developpers:
2.2 FR
2.2 CH
2.2 UK
2.2.2 FR
2.2.2 CH
2.2.2 UK
2.2.2 Hong Kong
2.2 China
Official GB Leak signed
Still wasn't able to get throught the first moto bootscreen.
r2beta0 had an idea so if someone can please help me get through this. I think i'm done with flashing things...
r2beta0 said:
Hmm, I just had an idea that needs elaboration. As we know we can flash any partition of the phone using sbf_flash or RSD Lite. If his problem really can be solved doing a data wipe it would be also solved by flashing a new "empty" CG37.smg. It doesn't need to be signed because /data is not checked by bootloader. So, we need a Milestone2 /data empty image (CG37.smg). One could do a data wipe and take the image of with dd command, but it would be a HUGE file (6,5 GB). I don't know if we can use a smaller file just to clean his /data. Maybe someone can elaborate that.
Click to expand...
Click to collapse
dangpzanco said:
Maybe you can flash a modded SBF, with a modded CG37 and a new CG that points to addresses from the middle of data to its end, and make two partitions with data spare space for the dual booting project, is that even possible?
Well, at least when you pack and zip it the SBF won't be hard to upload.
PS: Does the Milestone 1 full SBFs have the data CG included?
Sent from my Milestone 2 XDA App
Click to expand...
Click to collapse
I tried holding X button while i plug the phone the Wall charger but no sucess either. I just can't get to the screen with the Exclamation point...
I've tried to be as precise as possible to help people who will or already tried to help me. Please don't delete my thread or move it after i've put so much effort in this...
I've search in hundreads of threads around different forum XDA is my last chance...
I thanks everyone who will take some time to help me or even at least read this.
I don't know if this is going to help, but you could try that anyway:
- Download MotoAndroidDepacker (utility to unpack/repack SBF's)
- Choose one stock SBF (2.2 FR for example)
- Open and unpack it with the utility
- Rename CG66.smg to CG37.smg (you are going to use preinstall image as data image, both are ext3, but has different sizes. Don't know if it's going to work).
- Use utility to open folder with unpacked images and repack it
- Put phone in bootloader mode and flash the repacked SBF (rebuilt/firmware.sbf)
- Post results here
r2beta0 said:
I don't know if this is going to help, but you could try that anyway:
- Download MotoAndroidDepacker (utility to unpack/repack SBF's)
- Choose one stock SBF (2.2 FR for example)
- Open and unpack it with the utility
- Rename CG66.smg to CG37.smg (you are going to use preinstall image as data image, both are ext3, but has different sizes. Don't know if it's going to work).
- Use utility to open folder with unpacked images and repack it
- Put phone in bootloader mode and flash the repacked SBF (rebuilt/firmware.sbf)
- Post results here
Click to expand...
Click to collapse
I just did it no results still the same!
I don't think it looks good.
I didn't pull out the battery yet i wan't to give it a chance. I'll edit this post
Something is very wrong with your phone. I think your best bet is to reflash stock SBF and send your phone to warranty.
Did you try other options "dumb"? For example, change the simcard, change the sdcard, charge the battery with other alternative (universal charger)
r2beta0 said:
Something is very wrong with your phone. I think your best bet is to reflash stock SBF and send your phone to warranty.
Click to expand...
Click to collapse
Emacore said:
Did you try other options "dumb"? For example, change the simcard, change the sdcard, charge the battery with other alternative (universal charger)
Click to expand...
Click to collapse
I removed the sim card removed the sdcard, charge the battery with a milestone 1 avec two different charger. No results
@r2beta0 i think you are right i'll wait i someone help me until tomorrow evening if not i'll send it back to moto.
Have you tried to use sbf_flash on linux/mac?
Sent from my Milestone 2 XDA App
I think i'm going to try that. Will report later
r2beta0 said:
I don't know if this is going to help, but you could try that anyway:
- Download MotoAndroidDepacker (utility to unpack/repack SBF's)
- Choose one stock SBF (2.2 FR for example)
- Open and unpack it with the utility
- Rename CG66.smg to CG37.smg (you are going to use preinstall image as data image, both are ext3, but has different sizes. Don't know if it's going to work).
- Use utility to open folder with unpacked images and repack it
- Put phone in bootloader mode and flash the repacked SBF (rebuilt/firmware.sbf)
- Post results here
Click to expand...
Click to collapse
I have the same probleme .... And this don't work for me too.....
Alex, same problem ? What happened ? with the rom MS2ginger ? Two french guys , it is weird ! Hope mine won't go that way !
EVEALEX62 said:
I have the same probleme .... And this don't work for me too.....
Click to expand...
Click to collapse
I've tried Linux but no result... We are 3 french who have the exact same probleme it can't be Hardware?
Our Milestone 2 are somewhat different than others... I've phoned motorola for my problem today they told me to send it to a partner repair center but he warned me that if they discover i did something to the phone it will cost my a lot of money...
I'm sending it monday morning i'm really hoping for a solution before than...
Im not sure about service sbf vs the one that wipes user data. We have that kind of sbf for m2?
On the other side, looks like ROM chip go bad.
I'll ask some obvious question...you did not have any errors when flashing ? it always complete the process? Can you get into the bootloader when it print version 70.12 or 70.13 ?
Another obvious thing, did you verify md5 after downloading sbf ?
pat972 said:
Alex, same problem ? What happened ? with the rom MS2ginger ? Two french guys , it is weird ! Hope mine won't go that way !
Click to expand...
Click to collapse
No I go to MIUI yesterday... very bad news................................ I hope find a solution.............
RSDLite don't finish, I must deconecte and reboot bootlader manually and replug to got "pass" result !!
Bootloader is the 70.13
And the SBF is good because I alway use this file (don't download new)
.................. PLEASE HELP ..................
EVEALEX62 said:
No I go to MIUI yesterday... very bad news................................ I hope find a solution.............
RSDLite don't finish, I must deconecte and reboot bootlader manually and replug to got "pass" result !!
Bootloader is the 70.13
And the SBF is good because I alway use this file (don't download new)
.................. PLEASE HELP ..................
Click to expand...
Click to collapse
So it happenned both to us when we intalled MIUI so the problem is MIUI. Because i was using CM7 since Endless7 post the instruction avec Defy's ROM. And the phone was perfect...
We both have French Milestone 2 and i don't think it is my fault. I quite shure i did everything straight. I maybe a noob in dev or other things. But I have experience in flashing things...
My bootloader is 70.12 so it's different than Alex. And i used just like Alex the French Stock sbf i used everything i needed a freash clean install
When i flash i get to the "Please reboot phone manually" like everytime and then pull the battery go to bootloader and get finish
I had problems with miui too. After install MIUI and try back to MS2Ginger, phone dont boot, stuck at the first M bootscreen. So I try a full wipe and same problem, stuck at the first M. Mine bootloader was 70.12, so I flash the 70.13 and the spanish 2.2.2 sbf, and after a data and cache wipe, phone boot again.
Note: After flash a sbf, I dont remove the battery and pull again to get "Pass" on RSD Lite... just waiting to finish the process and disconnect the phone
Motodoido said:
I had problems with miui too. After install MIUI and try back to MS2Ginger, phone dont boot, stuck at the first M bootscreen. So I try a full wipe and same problem, stuck at the first M. Mine bootloader was 70.12, so I flash the 70.13 and the spanish 2.2.2 sbf, and after a data and cache wipe, phone boot again.
Note: After flash a sbf, I dont remove the battery and pull again to get "Pass" on RSD Lite... just waiting to finish the process and disconnect the phone
Click to expand...
Click to collapse
My phone is supposed to have the 70.12 bootloader right? If i flash the new one won't the repair center see that i modified the software?
The is no 70.12 bootloader on and-developper so how do i get back?
My phone doesn't not get to PASS it never did even in past... Except when i could do a wipe data and cache before flash
If you flash the 70.13 you do not be able to back to 70.12, so think before. When RSD is in reboot your phone 30%, I always remove my phone and never have problems
If you want try, here is the 70.13
The bootloader for the sbf 2.2.2 is 70.13 ! I remenber well, i did the official update on a windows pc, and it started by updating bootloader! But it's good news and may be just some sort of sbf incompatibility with the bootloader...just find the correct ones?
Sent from my MotoA953 using XDA App
pat972 said:
But it's good news
Click to expand...
Click to collapse
What is the good news ????

[Q] Need Help !! Defy can't boot at all !!

Hi All beloved expert,
I own defy MB525, after my RSD lite load the following file:
T-Mobile_MB525_6.19.0_1FF.sbf,
my phone can't start at with light on. I try to use RSD to load again this :
shadow_defy_2.3.3_85_Orange.sbf, cannot any more.
Now, my RSD cant detect my phone where the my defy white light is on.
May i know what should i do because i new here, possible to direct me the file for me to load again step by step.
Many thanks
Addy
did you wipe cache after flashing? maybe thats the problem, try go on recovery and wipe cache, try wipe data too, i think it will solve your problem, i had the same some weeks ago
tell me if it works
It seems that you flashed a CG version smaller than the stock rom had, from wich ROM you changed to T-Mobile_MB525_6.19.0_1FF.sbf??
Please read before flashing any stuff...
Read this, use the SBF depacker and the package to know the version of the CG files, then check the version of the CG39, CG31 files
http://forum.xda-developers.com/showthread.php?t=966537
LeonardoJegigzem said:
It seems that you flashed a CG version smaller than the stock rom had, from wich ROM you changed to T-Mobile_MB525_6.19.0_1FF.sbf??
Please read before flashing any stuff...
Read this, use the SBF depacker and the package to know the version of the CG files, then check the version of the CG39, CG31 files
http://forum.xda-developers.com/showthread.php?t=966537
Click to expand...
Click to collapse
First i flash shadow_defy_2.3.3_85_Orange.sbf, then i flash this :
T-Mobile_MB525_6.19.0_1FF.sbf,
after that my phone can't start at all and with white light on. Now i want to try to load other sbf file but RSD can't detect my phone any more.
tx
LeonardoJegigzem is Right... check the CG version of the SBFs by depacking them!
h1manshu said:
LeonardoJegigzem is Right... check the CG version of the SBFs by depacking them!
Click to expand...
Click to collapse
tx LeonardoJegigzem & h1manshu,
but i have depacker, and i use depacker to open the sbf file, but how do i see the version , i try check around , there are many .img file and other file, how to check it ?
tx
Use this
http://forum.xda-developers.com/attachment.php?attachmentid=511610&d=1297112360
LeonardoJegigzem said:
Use this
http://forum.xda-developers.com/attachment.php?attachmentid=511610&d=1297112360
Click to expand...
Click to collapse
This link link to donwload a Release.zip file, after i download and install the smgver.exe, after install nothing ,, i don't know what this for??
thanks
Add the path of that .exe to the enviroment vatiable path, and then run smgver on the console in the form
smgver path_to_smg_file
Motorola Defy CM7.2 Nightly OC 1GHz SuperCharger v6

[Q] using RSD for moto defy

Mobile:Moto Defy.
System Version:Moto_version.34.3601.7.MB525.retail.en.SEA15
Firmware version:2.2.2
Baseband version:EPU93_U_00.59.02
Problem:I had unrooted my moto defy and I want to bring it back to warranty. I want step by step guide for
1)getting the RSD(link) and using it.
2)getting SFB file for my defy version(INDIA-Mumbai) and how to use it.
3)Drivers required.
4)Cautions to be taken.
5)Do I need to root to carryout this process?
I need really a full help as I am new to this . Please help me. Thanks In advance.
freza080 said:
Mobile:Moto Defy.
System Version:Moto_version.34.3601.7.MB525.retail.en.SEA15
Firmware version:2.2.2
Baseband version:EPU93_U_00.59.02
Problem:I had unrooted my moto defy and I want to bring it back to warranty. I want step by step guide for
1)getting the RSD(link) and using it.
2)getting SFB file for my defy version(INDIA-Mumbai) and how to use it.
3)Drivers required.
4)Cautions to be taken.
5)Do I need to root to carryout this process?
I need really a full help as I am new to this . Please help me. Thanks In advance.
Click to expand...
Click to collapse
2)getting SFB file for my defy version(INDIA-Mumbai) and how to use it : Only use 2.2.2 SBF. If you flash newer sbf you might not be able to downgrade thereafter.
5)Do I need to root to carryout this process? : This flashing process will bring the phone to factory defaults (Stock) so it will be automatically unrooted. However, you may root again later.
This article has answers to all of your queries:
http://forum.xda-developers.com/showthread.php?t=1216982
Rajneeshgadge17 said:
2)getting SFB file for my defy version(INDIA-Mumbai) and how to use it : Only use 2.2.2 SBF. If you flash newer sbf you might not be able to downgrade thereafter.
5)Do I need to root to carryout this process? : This flashing process will bring the phone to factory defaults (Stock) so it will be automatically unrooted. However, you may root again later.
This article has answers to all of your queries:
http://forum.xda-developers.com/showthread.php?t=1216982
Click to expand...
Click to collapse
thanks . read the article in the mentioned link and got many things cleared. But i couldn't get exact version of my moto defy SFB. please please send me a direct link of that file. A million thanks to your reply
freza080 said:
thanks . read the article in the mentioned link and got many things cleared. But i couldn't get exact version of my moto defy SFB. please please send me a direct link of that file. A million thanks to your reply
Click to expand...
Click to collapse
Do you have the RSD Lite and the USB drivers installed. If not then refer to this article:
http://forum.xda-developers.com/showthread.php?t=1216982
For the SBF file use the following direct link to download the SBF:
http://sbf.droid-developers.org/umt...NFRYORTINT15_P001_A013_HWp3_Service1FF.sbf.gz
[Note: The above SBF is not Chinese which causes the flash burn; it is Taiwanese and safe to flash.]
Download and extract the above file.
1. Launch RSD lite and select the above extracted SBF file;
2. Turn off the phone and remove and replace the battery;
3. Press Volume UP and Power button until you see Bootloader menu;
4. Once its shows the Bootloader menu connect the USB cable to the RSD lite and then start the flashing process;
5. Phone will update the software and once it shows Success you are good to go.
Hope it helps!
Good Luck!!
Rajneeshgadge17 said:
Do you have the RSD Lite and the USB drivers installed. If not then refer to this article:
http://forum.xda-developers.com/showthread.php?t=1216982
For the SBF file use the following direct link to download the SBF:
http://sbf.droid-developers.org/umt...NFRYORTINT15_P001_A013_HWp3_Service1FF.sbf.gz
[Note: The above SBF is not Chinese which causes the flash burn; it is Taiwanese and safe to flash.]
Download and extract the above file.
1. Launch RSD lite and select the above extracted SBF file;
2. Turn off the phone and remove and replace the battery;
3. Press Volume UP and Power button until you see Bootloader menu;
4. Once its shows the Bootloader menu connect the USB cable to the RSD lite and then start the flashing process;
5. Phone will update the software and once it shows Success you are good to go.
Hope it helps!
Good Luck!!
Click to expand...
Click to collapse
first thanks for soo quick and nice reply!!!!!! .......... ......... I GOT ALL thing i had downloaded Sfb file from your link! ....... still as this is my first time n i am very worried so please tell me will this return my phone to warranty ? which version of RSD lite? thanks in advance. .......
freza080 said:
first thanks for soo quick and nice reply!!!!!! .......... ......... I GOT ALL thing i had downloaded Sfb file from your link! ....... still as this is my first time n i am very worried so please tell me will this return my phone to warranty ? which version of RSD lite? thanks in advance. .......
Click to expand...
Click to collapse
RSD Lite: Use the one from the following link:
http://forum.xda-developers.com/showthread.php?t=1348587
Do not worry about the warranty this will make the phone Stock 2.2.2.
Good Luck!!

WANT A ROOTABLE SBF for my defy plus

before wanting to help if u want to know the whole situation what happened then u can see it here
http://forum.xda-developers.com/showthread.php?t=1713465
now my problem is that i want an SBF for my motorola defy plus MB256 which is stable, can be rooted , can be upgraded to ics CM9 and with no bugs........since i am only able to flash the SBF of these type
DEFYPLUS_U3_4.5.1-134_DFP-231
any other sbf i try is failed
(rsdlite says pass but black screen shows up whith white led)
:crying:
currently i am using DEFYPLUS_U3_4.5.1-134_DFP-231_BLUR_SIGN_USADEFYEMARAB1B8RTGB005.0R_PDS03C_USAJRDNGIBRRTGB_P023_A025_M002_Service1FF
also DEFYPLUS_U3_4.5.1-134_DFP-231 types are all unrootable and hence i am helpless
Firstly: there is no such thing as CM9 with no bugs (but they are getting better and better). Second: use search option before posting. You're not special. This question has been asked 1000 times.
The black screen when flashing is because you're trying to flash an sbf with a lower codegroup version. You're on level 7. There is no downgrade to any sbf woth a lower codegroup version. Read about it here (search the first post for "downgrade")
You can't use the rooting toolkits because you have bootloader7 (e-fuse "blown" to level 7. The old rooting exploits don't work any more) How to root your build: DFP-188, DFP-231, DFP-2311 BL7 Finally Rooted
Please, guys: I'm not on bl7 myself, so correct me if I'm wrong on anything.
fiskenigaten said:
Firstly: there is no such thing as CM9 with no bugs (but they are getting better and better). Second: use search option before posting. You're not special. This question has been asked 1000 times.
The black screen when flashing is because you're trying to flash an sbf with a lower codegroup version. You're on level 7. There is no downgrade to any sbf woth a lower codegroup version. Read about it here (search the first post for "downgrade")
You can't use the rooting toolkits because you have bootloader7 (e-fuse "blown" to level 7. The old rooting exploits don't work any more) How to root your build: DFP-188, DFP-231, DFP-2311 BL7 Finally Rooted
Please, guys: I'm not on bl7 myself, so correct me if I'm wrong on anything.
Click to expand...
Click to collapse
well i read that guide
thanks for the info man but u see if i have defy plus and i am at cg7 with bootloader version 7 and it is unrootable then my question to u would be
HOW WAS I ABLE TO ROOT MY PHONE WHEN I BUYED IT
i mean before doing the cm9 experiment my phone was in android 2.3.6 and i was able to root/unroot it using DooMLoRD's Easy Rooting Toolkit
from here http://opusbonum.blogspot.in/
and it was all going fine untill i made a mistake in upgrading to cm9(for full data visit http://forum.xda-developers.com/showthread.php?t=1713465)
plus i am asking for solutions no links of threads
(its because in last 2 weeks i am searching xda for solutions and couldn't come up with anything)
http://forum.xda-developers.com/showthread.php?t=1542956
this link i tried but it ended up with bootloader error
bootloader
09.10
Err:A5,70,00,00,23
Battery OK
OK to program
Connect USB
Data cable
so plzz now tell me what to do
i want my defy plus back like before :crying:
or if there is way to change BL version and also i have a stupid question
HOW DO WE SEE OUR BL VERSION?
tusharbhan said:
well i read that guide
thanks for the info man but u see if i have defy plus and i am at cg7 with bootloader version 7 and it is unrootable then my question to u would be
HOW WAS I ABLE TO ROOT MY PHONE WHEN I BUYED IT
i mean before doing the cm9 experiment my phone was in android 2.3.6 and i was able to root/unroot it using DooMLoRD's Easy Rooting Toolkit
from here http://opusbonum.blogspot.in/
and it was all going fine untill i made a mistake in upgrading to cm9(for full data visit http://forum.xda-developers.com/showthread.php?t=1713465)
plus i am asking for solutions no links of threads
(its because in last 2 weeks i am searching xda for solutions and couldn't come up with anything)
http://forum.xda-developers.com/showthread.php?t=1542956
this link i tried but it ended up with bootloader error
bootloader
09.10
Err:A5,70,00,00,23
Battery OK
OK to program
Connect USB
Data cable
so plzz now tell me what to do
i want my defy plus back like before :crying:
or if there is way to change BL version and also i have a stupid question
HOW DO WE SEE OUR BL VERSION?
Click to expand...
Click to collapse
Did you just read the threads in the link. I just can't get the part
plus i am asking for solutions no links of threads
Click to expand...
Click to collapse
. Don't you see Link is the solution.Or do you somehow assume someone would copy & paste a whole thread here.
I'm again quoting the solution. Just click the thread and read. Its all described there.
PS: Your BL version is decided with the ROM build. CG7 & BL7 are the same thing, the moral of the story is You are on BL7 (Bootloader 7)
fiskenigaten said:
Firstly: there is no such thing as CM9 with no
You can't use the rooting toolkits because you have bootloader7 (e-fuse "blown" to level 7. The old rooting exploits don't work any more) How to root your build: DFP-188, DFP-231, DFP-2311 BL7 Finally Rooted
Click to expand...
Click to collapse
neo.ank said:
Did you just read the threads in the link. I just can't get the part . Don't you see Link is the solution.Or do you somehow assume someone would copy & paste a whole thread here.
I'm again quoting the solution. Just click the thread and read. Its all described there.
PS: Your BL version is decided with the ROM build. CG7 & BL7 are the same thing, the moral of the story is You are on BL7 (Bootloader 7)
Click to expand...
Click to collapse
hey there i know that i am at Bootloader 7 and i got that its currently unrootable so at this link (http://forum.xda-developers.com/showthread.php?t=1542956) they are trying to find a solution
but u see the method didnt worked for me
i ended up with bootloader error
bootloader
09.10
Err:A5,70,00,00,23
Battery OK
OK to program
Connect USB
Data cable
tried 2 times still the same.....
and i would really appreciate if u guys first read the whole story of mine
here
http://forum.xda-developers.com/showthread.php?t=1713465
then u might be able to understand my situation
tusharbhan said:
hey there i know that i am at Bootloader 7 and i got that its currently unrootable so at this link (http://forum.xda-developers.com/showthread.php?t=1542956) they are trying to find a solution
but u see the method didnt worked for me
i ended up with bootloader error
bootloader
09.10
Err:A5,70,00,00,23
Battery OK
OK to program
Connect USB
Data cable
tried 2 times still the same.....
and i would really appreciate if u guys first read the whole story of mine
here
http://forum.xda-developers.com/showthread.php?t=1713465
then u might be able to understand my situation
Click to expand...
Click to collapse
u got this error in the first step flash or in the step 2 flash?
tusharbhan said:
hey there i know that i am at Bootloader 7 and i got that its currently unrootable so at this link (http://forum.xda-developers.com/showthread.php?t=1542956) they are trying to find a solution
but u see the method didnt worked for me
i ended up with bootloader error
bootloader
09.10
Err:A5,70,00,00,23
Battery OK
OK to program
Connect USB
Data cable
tried 2 times still the same.....
and i would really appreciate if u guys first read the whole story of mine
here
http://forum.xda-developers.com/showthread.php?t=1713465
then u might be able to understand my situation
Click to expand...
Click to collapse
Redownload the files. make sure you use both files from the same source(either both CN or both CEE). do a complete wipe from recovery. The error you are getting occurs when you flash an SBF with lower version than you are on but since CG7 is highest till date, this means you can flash those only with a CG7 SBF. I read what you did.
PS: BL7 is rootable by flashing a rooted SBF.Thats what the other thread is about.
neo.ank said:
Redownload the files. make sure you use both files from the same source(either both CN or both CEE). do a complete wipe from recovery. The error you are getting occurs when you flash an SBF with lower version than you are on but since CG7 is highest till date, this means you can flash those only with a CG7 SBF. I read what you did.
PS: BL7 is rootable by flashing a rooted SBF.Thats what the other thread is about.
Click to expand...
Click to collapse
yea now i get it i got the error on this step
4. Flash rooted SBF 4.5.1-134 DFP-231 CN Rooted SBF Part.1, 4.5.1-134 DFP-231 CN Rooted SBF Part.2 or 4.5.1-134 DFP-231 Retail.en.EU CEE Rooted SB
it might be because i skipped this step
2. Flash 4.5.1-134 DFP-231 CN or 4.5.1-134 DFP-231 Retail.en.EU CEE (It doesn't matter what version of this two You flash but it must be the same with version from point 4).
because i thought that i already had DEFYPLUS_U3_4.5.1-134_DFP-231_BLUR_SIGN
so it might work but it didnt this time ill try the complete process
thank u guys
:laugh:
okaay this time i tried each and everything as same as given here
http://forum.xda-developers.com/showthread.php?t=1542956
but when flashing rooted sbf rsd lite was restarting my phone and the process ended in 16% and i got an error in my phone
Bootloader
09.10
Err:A5,69,35,00,27
Battery Ok
OK to Program
Connect USB
Data Cable
what to do now
Dear tusharbhan,
it seems your datacable is too long (it will loss signals if the cable is disfunctional), try it with a very short datacable and use the usb-port which directly connected with the motherboard of your computer.
RATTAR said:
Dear tusharbhan,
it seems your datacable is too long (it will loss signals if the cable is disfunctional), try it with a very short datacable and use the usb-port which directly connected with the motherboard of your computer.
Click to expand...
Click to collapse
I don't think the length is the problem (I use an extended cable which is double the length of original)but yes changing the cable or port might do it.
tusharbhan said:
okaay this time i tried each and everything as same as given here
http://forum.xda-developers.com/showthread.php?t=1542956
but when flashing rooted sbf rsd lite was restarting my phone and the process ended in 16% and i got an error in my phone
Bootloader
09.10
Err:A5,69,35,00,27
Battery Ok
OK to Program
Connect USB
Data Cable
what to do now
Click to expand...
Click to collapse
The files might be corrupted, Re-download,also try changing your port/cable.
Also check you RSDLite version too.
it worked
http://forum.xda-developers.com/show....php?t=1542956
finally i got it worked
the thing was i was doing a step wrong
i flashed
4.5.1-134 DFP-231 CN
and
rooted version 4.5.1-134 DFP-231 Retail.en.EU CEE Rooted SBF
that is why i got bootloader error
now i flashed 4.5.1-134 DFP-231 Retail.en.EU CEE
and rooted version 4.5.1-134 DFP-231 Retail.en.EU CEE Rooted SBF
and it worked
yay i am so happy
thanks to all
fiskenigaten , neo.ank and imam88
thank u very much guys:good: :laugh:
now to upgrade
thank u guys to help me
now i am finally rooted
and i will request 1 last thing
i have few questions and would like the answers....
1) i want to upgrade to CM9 how do i do it ? (please explain the method because last time i failed u can see here http://forum.xda-developers.com/showthread.php?t=1713465)
2) if not CM9 then can i upgrade to CM7
3) u see i am a noob i dont know much about roms and how to flash them so please explain to me how to flash custom rom etc
thank u again guys :good:
tusharbhan said:
thank u guys to help me
now i am finally rooted
and i will request 1 last thing
i have few questions and would like the answers....
1) i want to upgrade to CM9 how do i do it ? (please explain the method because last time i failed u can see here http://forum.xda-developers.com/showthread.php?t=1713465)
2) if not CM9 then can i upgrade to CM7
3) u see i am a noob i dont know much about roms and how to flash them so please explain to me how to flash custom rom etc
thank u again guys :good:
Click to expand...
Click to collapse
Good you got it rooted (I already told you to keep both files same And its mentioned explicitly at the Root thread)
You need Custom recovery to flash a custom ROM.
Install 2ndInit first
And just be careful before you begin with anything.Never Hurry. Reading carefully what's written won't hurt you. But doing idiotic mistakes just coz you weren't careful will.
Update cm9 for defy plus
Install 2ndInit Recovery Installer v2.3
http://fitsnugly.euroskank.com/skankwich/?id=jordanplus
http://goo.im/gapps/gapps-ics-20120429-signed.zip
turn of the phone switch on the phone when red led blink in defy that time press volume down button
then select recovery mode and select custom recovery mode ok
1.wipe data factory rest
2.wipe cache partition
3.install zip from sdcard
4.choose the cm9-20120620.0731-Defy+
5.install this zip
6.chose gapps-ics-20120429-signed.zip
Then reboot u r defy plus it will take 3mins boot
confused
ela1103 said:
Install 2ndInit Recovery Installer v2.3
http://fitsnugly.euroskank.com/skankwich/?id=jordanplus
http://goo.im/gapps/gapps-ics-20120429-signed.zip
turn of the phone switch on the phone when red led blink in defy that time press volume down button
then select recovery mode and select custom recovery mode ok
1.wipe data factory rest
2.wipe cache partition
3.install zip from sdcard
4.choose the cm9-20120620.0731-Defy+
5.install this zip
6.chose gapps-ics-20120429-signed.zip
Then reboot u r defy plus it will take 3mins boot
Click to expand...
Click to collapse
thank u guys u see i want CM9 but before that i want to ask 2 questions more
will it be okay i mean will my defy plus run better or slower
can i downgrade to 2.3.6 if i dont like or something (is it one way decision):silly:
please suggest me
and yea hey @ela1103 thank u but can i use this site
http://forum.xda-developers.com/showthread.php?t=1432100
but can u explain what does it mean buy these steps
:FLash
6:Flash CM9 Kernel [Note: Defy Plus users DO NOT FLASH KERNEL ZIP!]
7:Flash Gapps zip(On first page of ICS DeV thread)
8:Flash Battery Fix(Only for Red Lens) http://dl.dropbox.com/u/29851821/ICS...tery Fix.zip
9:Clear Cache and Dalvik Cache
from here i didnt understood
do i have to flash kernal or not
whats up with battery fix
??
[ICS][CM9]Defy/Defy+ kangs by FuZZ
Defy Plus users DO NOT FLASH KERNEL ZIP
Here is the link for cm9 defy plus
http://forum.xda-developers.com/showthread.php?t=1673116
Install 2ndInit Recovery Installer v2.3
http://fitsnugly.euroskank.com/skankwich/?id=jordanplus
http://goo.im/gapps/gapps-ics-20120429-signed.zip
turn of the phone switch on the phone when red led blink in defy that time press volume down button
then select recovery mode and select custom recovery mode ok
1.wipe data factory rest
2.wipe cache partition
3.install zip from sdcard
4.choose the cm9-20120620.0731-Defy+
5.install this zip
6.chose gapps-ics-20120429-signed.zip
Then reboot u r defy plus it will take 3mins boot
ela1103 said:
Install 2ndInit Recovery Installer v2.3
http://fitsnugly.euroskank.com/skankwich/?id=jordanplus
http://goo.im/gapps/gapps-ics-20120429-signed.zip
turn of the phone switch on the phone when red led blink in defy that time press volume down button
then select recovery mode and select custom recovery mode ok
1.wipe data factory rest
2.wipe cache partition
3.install zip from sdcard
4.choose the cm9-20120620.0731-Defy+
5.install this zip
6.chose gapps-ics-20120429-signed.zip
Then reboot u r defy plus it will take 3mins boot
Click to expand...
Click to collapse
ela1103 said:
Defy Plus users DO NOT FLASH KERNEL ZIP
Here is the link for cm9 defy plus
http://forum.xda-developers.com/showthread.php?t=1673116
Install 2ndInit Recovery Installer v2.3
http://fitsnugly.euroskank.com/skankwich/?id=jordanplus
http://goo.im/gapps/gapps-ics-20120429-signed.zip
turn of the phone switch on the phone when red led blink in defy that time press volume down button
then select recovery mode and select custom recovery mode ok
1.wipe data factory rest
2.wipe cache partition
3.install zip from sdcard
4.choose the cm9-20120620.0731-Defy+
5.install this zip
6.chose gapps-ics-20120429-signed.zip
Then reboot u r defy plus it will take 3mins boot
Click to expand...
Click to collapse
You sure everything you posted is correct.!! Better detail things and maintain integrity of your posts. Helping someone is a good thing but a small mistake could end up in disaster.
@OP Here is the link for supported ROMs(see the first post). You can chose any under Gingerbread.
Here is [APP] 2ndInit Read installation instructions carefully. At this step you can screw your phone.
What a Custom recovery and 2ndInit is, you'll find it here.
PS: Since the problem(rooting) you started this thread for is solved, its better to post your relevant questions in the respective threads and discontinue this one.This makes thing confusing and hectic for users.
thanks
neo.ank said:
You sure everything you posted is correct.!! Better detail things and maintain integrity of your posts. Helping someone is a good thing but a small mistake could end up in disaster.
@OP Here is the link for supported ROMs(see the first post). You can chose any under Gingerbread.
Here is [APP] 2ndInit Read installation instructions carefully. At this step you can screw your phone.
What a Custom recovery and 2ndInit is, you'll find it here.
PS: Since the problem(rooting) you started this thread for is solved, its better to post your relevant questions in the respective threads and discontinue this one.This makes thing confusing and hectic for users.
Click to expand...
Click to collapse
ill see to it later currently i have no plans on upgrading now because of a sudden delay so ill keep u guys posted when i try that:fingers-crossed:
i really appreciate your efforts and your help thank you very much
and yea about starting new thread..... well i am sorry i was kind of freaked out
and was in a hurry so ... u ll understand i wont repeat my again
:highfive:thank you very much........ i had been struck with same problem for more than week......
finally able to root my defy plus.......but it being repeatedly rebooted after every 30 secs is there any solution for that?????????????.
thanks in advance........:good::good::good:

Need Recovery

Just used Z4Root and gained root access and now need a recovery. Where can I get Clockwork or any recovery for that matter?
it's here: http://forum.xda-developers.com/showthread.php?t=1310641 (attached to the first post)
sebciu said:
it's here: http://forum.xda-developers.com/showthread.php?t=1310641 (attached to the first post)
Click to expand...
Click to collapse
Thanks but now the phone is caught in a bootloop. How do I get to recovery from it?
dericb11 said:
Thanks but now the phone is caught in a bootloop. How do I get to recovery from it?
Click to expand...
Click to collapse
Look for the SBF of the firmware version you had here: http://and-developers.com/sbf:milestone2
Copy and search the MD5 here to download: http://sbf.droid-developers.org/umts_milestone2/list.php
Follow instructions here: http://forum.xda-developers.com/showthread.php?t=1032372&highlight=recover
If you are not sure, tell me which android version you had and from which operator (o retail) it was.
If you are not sure about the last, tell me your country and keyboard type.
Good luck.
Lean946 said:
Look for the SBF of the firmware version you had here: http://and-developers.com/sbf:milestone2
Copy and search the MD5 here to download: http://sbf.droid-developers.org/umts_milestone2/list.php
Follow instructions here: http://forum.xda-developers.com/showthread.php?t=1032372&highlight=recover
If you are not sure, tell me which android version you had and from which operator (o retail) it was.
If you are not sure about the last, tell me your country and keyboard type.
Good luck.
Click to expand...
Click to collapse
Not sure on the country. It is a Qwerty Keyboard and has 2.2 on it. The FCC ID: IHDP56KC2 and Model: CE0168
dericb11 said:
Not sure on the country. It is a Qwerty Keyboard and has 2.2 on it. The FCC ID: IHDP56KC2 and Model: CE0168
Click to expand...
Click to collapse
You are not sure of the country you are in?
Anyways... if you are in Europe, try this one: http://sbf.droid-developers.org/umt...XMILE20RTGB_P040_A013_HWp2a_Service1FF.sbf.gz
America: http://sbf.droid-developers.org/umt...8_A004_M003_HWp2a_WIG145890_Service1FF.sbf.gz
Good luck.
Lean946 said:
You are not sure of the country you are in?
Anyways... if you are in Europe, try this one: http://sbf.droid-developers.org/umt...XMILE20RTGB_P040_A013_HWp2a_Service1FF.sbf.gz
America: http://sbf.droid-developers.org/umt...8_A004_M003_HWp2a_WIG145890_Service1FF.sbf.gz
Good luck.
Click to expand...
Click to collapse
SBF is not working. The start button does nothing and show device either. So just found out RSDLite does not work on every PC.
dericb11 said:
SBF is not working. The start button does nothing and show device either. So just found out RSDLite does not work on every PC.
Click to expand...
Click to collapse
i think you should flash stock GB rom, for example this one: http://sbf.droid-developers.org/umt...LE2GBQWRTGB_P016_A006_HWp2a_Service1FF.sbf.gz
rather than stock FROYO
if you live in europe, doesn't really matter if you flash british, french or italian rom, my MS2 was purchased in italy but i flashed british rom and it works fine.
perhaps you have similar problem to: http://forum.xda-developers.com/showthread.php?t=1369926
if you have any power problems try this solution: http://forum.xda-developers.com/showthread.php?p=10163846
they worked for me
dericb11 said:
SBF is not working. The start button does nothing and show device either. So just found out RSDLite does not work on every PC.
Click to expand...
Click to collapse
Try renaming the SBF to something more simple (like froyo.sbf) and put it in the root of the drive (C:\)
Also, this may be a silly question, but, did you unzip it? The sbf comes compressed as a .sbf.gz file, unzippable with 7zip or WinRAR (or similar).
Did you boot successfuly into bootloader mode? (The black screen with weird text)
Good luck
Lean946 said:
Try renaming the SBF to something more simple (like froyo.sbf) and put it in the root of the drive (C:\)
Also, this may be a silly question, but, did you unzip it? The sbf comes compressed as a .sbf.gz file, unzippable with 7zip or WinRAR (or similar).
Did you boot successfuly into bootloader mode? (The black screen with weird text)
Good luck
Click to expand...
Click to collapse
Yes I unzipped. And have got to bootloader and stock recovery. Stock recovery wipe doesn't stop bootloop. Do you mean place SBF in root of PC drive?
dericb11 said:
Yes I unzipped. And have got to bootloader and stock recovery. Stock recovery wipe doesn't stop bootloop. Do you mean place SBF in root of PC drive?
Click to expand...
Click to collapse
Exactly. Then load it in RSD Lite and try again.
Sometimes RSD doesn't like long file paths.

Resources