I just got a refurbished Nook Color. Seems to work fine but you have to push the power button hard to click it.
Haven't rooted, installed roms, anything yet. But I can't get it to boot from my SD card. I have a 4GB (class-4) microSD card. (I have checked the sdcard for bad blocks using the linux "badblocks" command.) I have followed instructions detailed here:
glasskeys. /2011/06/27/how-to-make-a-bootable-sd-card-running-cyanogenmod-for-the-nook-color/
and here [note - new users are forbidden from posting links here - in the above and below links, I left out the "com" after the dot in the website address]:
nookdevs. /Nookie_Honeycomb:_Burning_a_bootable_SD_card
. I use Ubuntu Linux 10.11 "dd" command to write the .img files to the SD card. However, once I write the SD card and put it into my Nook, the nook won't turn on. Just won't turn on. As soon as I take the card out and try again, I can boot up the nook to the locked-down, walled-garden stock Android on the device.
Help! Is something wrong with my SD card, or with my device? I have a 2GB microSD card somewhere I can find if I need to...
Re:
Can anyone help me find the source of the problem? Is it my SDcard, my card-burning technique (i followed the dd instructions word for word), my computer or is something wrong with my Nook?
What I might suggest is to discard your original source of instructions and start fresh. Search the xda forum for clear information on 1) proper mSD card to use; 2) proper card burning software; 3) the most appropriate rom(s) to use for what you want your Nook to do for you, and 4) if necessary, very explicit instructions to troubleshoot any problems you may encounter with your processes. I'll not point to specific locations here, because I'm not sure what you actually want to do, But the search engine is very thorough and the threads are numerous.
Good luck. I'm sure you'll be quite content with your newly rooted/rommed NC.
yanom said:
Can anyone help me find the source of the problem? Is it my SDcard, my card-burning technique (i followed the dd instructions word for word), my computer or is something wrong with my Nook?
Click to expand...
Click to collapse
I have a section in my tips thread linked in my signature that deals with bootable SDs, but I'm not sure it's going to help you. I was helping another user that had the same exact problem where the Nook would not power on with the SD in. One of the things I had him do was fully charge his Nook. I can't remember how he resolved it though, if he did. But I suspect a faulty Nook or SD. Pins bent or something.
Sent from my Nook Color running ICS and Tapatalk
leapinlar said:
I have a section in my tips thread linked in my signature that deals with bootable SDs, but I'm not sure it's going to help you. I was helping another user that had the same exact problem where the Nook would not power on with the SD in. One of the things I had him do was fully charge his Nook. I can't remember how he resolved it though, if he did. But I suspect a faulty Nook or SD. Pins bent or something.
Sent from my Nook Color running ICS and Tapatalk
Click to expand...
Click to collapse
Thanks. It's worth noting that, if I get an SD with normal data (photos, etc) on it and put it in while the nook is booted normall, the nook can read the card and see what's on there. So the nook can read cards. That doesn't mean the boot-up bits aren't screwy.... this is refurbished.
Update
Update: I got it to work. However, it's quite laggy, possibly because it's Honeycomb on a class 2 (low IO speed) card. Can anyone point me to a super-slimed android (don't care what version) .img file I can put on my card?
yanom said:
Update: I got it to work. However, it's quite laggy, possibly because it's Honeycomb on a class 2 (low IO speed) card. Can anyone point me to a super-slimed android (don't care what version) .img file I can put on my card?
Click to expand...
Click to collapse
Oh, do not use Honeycomb. It is terrible. Use CM 7.2. They just this weekend came out with a stable version. Cyanogenmod.com. Look for encore stable. And your class 2 should work great.
Sent from my NookColor using Tapatalk
leapinlar said:
Oh, do not use Honeycomb. It is terrible. Use CM 7.2. They just this weekend came out with a stable version. Cyanogenmod.com. Look for encore stable. And your class 2 should work great.
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
Let me +1 the latest and greatest CM 7.2. I was using a supposedly faster card with 7.1 on an NC and I also experienced a lot of lagging.
Switching to a class 4 SanDisk card and going to 7.2 fixed the problem. Since I did both at the same time, I can't tell you what exactly made the difference but if installing 7.2 does not fix the issue, try changing your card.
I followed these instructions which installs CM7 on your SD card so you can dual boot if necessary. Also, this has the same exact info written in a slightly less techie language. (I am not sure why he is trying to use the hardware keys to reboot into the recovery mode when it can be done easily from within CM7.)
Good luck!
I know this is a super old thread, but it seems like an appropriate place to post. I've got three Nook Color tablets from my niece and nephews. I flashed them with Mirage Cyanogenmod 7.2 via CWM on an SD card. Once I got the SD setup, I went through two of them in 10 minutes total. No sweat. I installed two fresh, out-of-the-box SD cards in each tablet, which left the modded, CWM SD card untouched after flashing the first two. The third one was missing for several weeks. They just found that one. They dropped off the third tablet along with the modded SD card, which was sealed in a ziplock bag, to me. I installed the card into the third Nook Color, which was untouched after flashing the first two, and the third Nook Color booted right past the SD card and into the stock OS. I've reflashed the same .img file and others, including verygreen's onto this SD card. It simply refuses to boot from the SD. I've tried writing the .img file from WinImage, and WinImage32 through the SD slot on my laptop, an SD card adapter via USB, and through the nook itself as a mass storage drive. I'm stumped. Any thoughts?
On a side note, I don't have access to the first two to confirm the SD card is still on track, nor do I, at this point, have a spare SD card to troubleshoot with. Those are my next steps to take, but I am curious what the experts might have to suggest in the mean time. Thanks in advance, and I'll post my solution, if I solve this.
Are you sure the third one is a Nook Color? It could be a Nook Tablet. They look the same, but the Tablet has a silver bezel instead of black. Those cards will not boot on a Tablet.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
Are you sure the third one is a Nook Color? It could be a Nook Tablet. They look the same, but the Tablet has a silver bezel instead of black. Those cards will not boot on a Tablet.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
My first thought was "that's a ridiculous question. Of course it's a Color!", but then I peeled the cover off, and the bezel is indeed silver. Looks like I have some more reading to do. Thanks for saving me a TON of grief and frustration.
Just to follow up, I followed the instructions for flashing Cyanogenmon on the Nook TABLET, thank you Leapinlar, and everything is good. Thanks again.
Related
New here, yes I did look around. Found lots of other good info, but not this. If I missed it, feel free to remove my man card. I just got a nook color for x-mas yay me. I have followed two guides:
Well I tried to post two links but that wont work. I understand. Anyway, one guide is called How to Install CyanogenMod 7 on the Nook Color (PC Version), found it on Youtube. Other is called How to: Root a Nook Color, install CyanogenMod 7, and overclock it off of icrontic.com Hope that helps.
I am using at 8gb version to write to SD card. I copy both files over without un-ziping them. Follow all directions. However nook will not boot into Cyanogen. I just get the normal nook boot up. I have tried several times. I am new to the whole rooting thing and have seen people post different versions of the same file. Not sure if that has anything to do with it.
Lastly,
Nook firmware: 1.3
Not using a Scan Disk SD card.
I assume you want to enjoy the beauty of CM7.
Before guiding you, a very first basic question needs to be asked: do you want/intend to run CM7 on eMMC or off the uSD?
I assume you want to enjoy the beauty of CM7.
Before guiding you, a very first basic question needs to be asked: do you want/intend to run CM7 on eMMC or off the uSD?
Well I didn't know there were other options other than CM7. I have also been told that is one is the best all around one out there. You will have to excuse my ignorance but what is eMMC and uSD?
Don't worry, we all learn something day to day.
CM7 is a custom ROM (or OS if you want to call it), which replaced the stock OS by many of us. It is one of the most used ROM out there for NC (short cut for NOOKcolor)
In order to run/use CM7 on the NC, there are 2 choices:
1. Installing and running it (CM7) from the internal memory (a.k.a. eMMC) or
2. Booting and running it (CM7) from the external uSD card
You can spend the whole day searching for the difference in details, here, I just give you some quick thinking of the 2.
Running from eMMC = more complicate installation process, smooth performance, a lot less FC's (Force Close = applications hung), easy to backup, more storage. But you will void the B&N warranty since you delete their original stock OS.
Booting off uSD is a quick way to explore the beauty of CM7 or any custom ROM WITHOUT effecting the stock OS, meaning still under warranty. Down side is you need to have a 8GB or 16GB Sandisk class 4, which probably costs about $20 (onsale for 16GB).
Ok does it have to be a Scandisk sd card? I thought loading CM7 via SD card removed the warranty also. A side question I have. I saw on youtube someone was able to "dual boot" the nook OS with the CM7 OS. They could swap back and forth, any idea what this is about? Sorry I don't have much more information on it than that.
If loading through SD card does not void warranty I would prefer that for the time being until I get the hang of this stuff more. Then again a fully rooted nook is basically a android tablet+nook. The only reason I would want the warranty is if something inside were to break.
Would the reason why my attempt didn't work be related to the fact that I didn't have a Scandisk SD card?
K9Shep said:
Ok does it have to be a Scandisk sd card?
Click to expand...
Click to collapse
No, it does not have to be a Sandisk but Sandisk (class 4) is the best (have been tested) on the market. You can use any other brands, it might work and might not. Therefore, if you intend to run CM7 off uSD, Sandisk is strongly RECOMMENDED. If you use the uSD as an additional storage, any brand is OK.
I thought loading CM7 via SD card removed the warranty also.
Click to expand...
Click to collapse
No, it does not. Running off uSD has zero effect on stock OS.
A side question I have. I saw on youtube someone was able to "dual boot" the nook OS with the CM7 OS. They could swap back and forth, any idea what this is about? Sorry I don't have much more information on it than that.
Click to expand...
Click to collapse
A lot of people mistype or mis-use the term "dual-boot"
AFAIK, there is 2 kinds of "dual-boot" (one of them is incorrectedly used)
a. Leaving stock OS on eMMC and booting CM7 off uSD.
b. Installing 2 different ROMs on eMMC.
I personally choose to say b. should be called "dual-boot", not a. but a lot of people calling a. as "dual-boot". I don't mind.
What your question is for item a.
All you have to do is during powering up, press and hold the "N" button then select booting Normal, it will boot into whatever on the eMMC (i.e. stock OS) even having CM7 uSD plugged in.
If loading through SD card does not void warranty I would prefer that for the time being until I get the hang of this stuff more. Then again a fully rooted nook is basically a android tablet+nook. The only reason I would want the warranty is if something inside were to break.
Click to expand...
Click to collapse
A very good choice. Go for it.
Note: recommend getting the Sandisk class 4.
Would the reason why my attempt didn't work be related to the fact that I didn't have a Scandisk SD card?
Click to expand...
Click to collapse
I don't know what you're doing so can't say.
What have you done?
Ok sorry it took me a little bit to get back to you guys. I work the night shift so it can be a pain and make you seem like a ghost.
So I downloaded a file called 8gb_clockwork-0.7. Used a program called Win32 Diskmanager to write that file to the SD card. I have an 8gb SD card. Not Scandisk.
I then copied over two file that are .zip files. I did not un-zip them. Files are gapps-gb-20110307-signed and update-cm-7.0.3-encore-signed.
I am using my phone as a micro SD card reader. Could that be causing issues?
Everything I read said to do what I just said/did. I then pop in the SD card into the nook. My nook then boots up normally, I.E. standard nook OS.
Any help would be greatly appreciated, thank you.
Again, it goes back to my question in post #2.
Before getting an answer from you, I cannot provide any more help.
In fact, I don't want to guide you through the wrong direction.
I would like to run it off of the USB drive until I get familiar with it. Just in case I do not like it. As this is my first time rooting something I would like to keep my options open.
K9Shep said:
I would like to run it off of the USB drive until I get familiar with it. Just in case I do not like it. As this is my first time rooting something I would like to keep my options open.
Click to expand...
Click to collapse
I assume you meant to run CM7 off uSD (you said USB drive???)
Anyway, if that's the case, what you have done was incorrect.
Forget about it, start over again.
With your not Sandisk uSD card, I wouldn't recommend but if you have to use it, then go with it for now.
1. download "win32diskimager" (I hope you already it)
2. download the "Size-agnostic SD" v1.3 imager from this link: http://forum.xda-developers.com/showthread.php?t=1000957
3. try this ROM (build 12122011) as many others like it from this link: http://forum.xda-developers.com/showthread.php?t=1344873
4. download this GApp (20110828) for CM7 from this link: http://wiki.cyanogenmod.com/index.php?title=Latest_Version
5. try to follow verygreen's instructions from the link that I posted in step 2.
If you not able to or hitting issue, get back here for more help
Will do. Thanks again for all the help. Also yes I did mean uSD :/ I will try this Wednesday during the day and get back to you as I am about to start another shift.
I have a new-to-me Nook Color running the 1.4.2 firmware. I did a factory reset and set up my Barnes and Noble account. Yay me. However I can't FOR THE LIFE OF ME get it to boot off the SD card.
I've tried two 2GB cards (Samsung & SanDisk) and one 8GB SanDisk card. Also used three different card readers to burn the .IMG. What am I missing? I stick them in the Nook and the Nook just boots up as normal without hesitation. I've been rooting cell phones for years but this tablet has me stumped.
Is there another option I can use to flash CWM? Once I get it flashed I'm sure flashing the ROM is a breeze...
EDIT: After more and more digging, it might be an issue with writing to the wrong partition. How can I check to see if I'm installing to the write partition? I've formatted my cards multiple times. This is the stuff I see in a lot of answer posts:
of = /dev/disk# (good)
of = /dev/disk#p# (bad)
Click to expand...
Click to collapse
have you wrote an sd card that will boot (ie. Clockwork 4 gig et al). Can you read and write to it from within stock? More data please, what were you writing to what partition?
When I use the uSD card to boot and it is plugged into the computer you should hear three da-da-das.
n8nmad said:
have you wrote an sd card that will boot (ie. Clockwork 4 gig et al). Can you read and write to it from within stock? More data please, what were you writing to what partition?
When I use the uSD card to boot and it is plugged into the computer you should hear three da-da-das.
Click to expand...
Click to collapse
I have never successfully created an SD card that will boot on the Nook. Outside of the Nook, I have no way of testing to see if works or not.
You asked what partition, but I only have one partition on the card. If I open up the card in Disk Manager, there's just one allotment of space. When you burn the Image, is that supposed to create a separate partition that's visible in My Computer? If so, that's not happening because all the data is in one spot on the card (from what I can tell)
You need to flash the card. I suggest starting here:
http://forum.xda-developers.com/showthread.php?t=922870
or any of the other dev threads dealing with dual boots or whatever it is you are trying to accomplish.
Does your stock nook format sd cards to write books and such? If not that would be a big clue that it is a hardware issue
n8nmad said:
You need to flash the card. I suggest starting here:
http://forum.xda-developers.com/showthread.php?t=922870
or any of the other dev threads dealing with dual boots or whatever it is you are trying to accomplish.
Does your stock nook format sd cards to write books and such? If not that would be a big clue that it is a hardware issue
Click to expand...
Click to collapse
Yes, the stock Nook picks up the cards and formats them when installed. I've used these cards for all my smartphone rooting without any issues.
I've also formatted the cards and burned the CWM images using the windiskimager tool. It's just not bootable for some reason
The very first fundamentally step is to check whether it is a NOOKcolor or Nook Tablet.
votinh said:
The very first fundamentally step is to check whether it is a NOOKcolor or Nook Tablet.
Click to expand...
Click to collapse
Holy balls, I feel like an idiot. I had no idea the two were so similar. I am almost certain I have the Color (going by what it says on the case) but I'll look closely when I get home
It's the Nook Tablet. Wow....just...wow
On the bright side, at least my technical experience isn't the problem. My common sense on the other hand...
I believe you still can root the NT or run the pre-alpha ROM from it.
Unsure if it's able to run from uSD yet or not.
Hi xda, my nook won't boot up at all after I tried to restore to stock from autonooter 1.01. I read as many threads as I could and tried to make a bootable sd from leapinLar's tips page. The stock recovery with cwr and without. I used winimage and win32. With winImage I get an error "reading from file". win32 seems to write the file but it doesn't boot up the nook. When I try and open the sd with windows to see if anything is on the sd it says "not formatted would you like to format it now". I downloaded file, unzipped, then wrote to sd. I must be doing something wrong creating the sd but I can't find any info as to what. Thanks for any help
Stjpa said:
Hi xda, my nook won't boot up at all after I tried to restore to stock from autonooter 1.01. I read as many threads as I could and tried to make a bootable sd from leapinLar's tips page. The stock recovery with cwr and without. I used winimage and win32. With winImage I get an error "reading from file". win32 seems to write the file but it doesn't boot up the nook. When I try and open the sd with windows to see if anything is on the sd it says "not formatted would you like to format it now". I downloaded file, unzipped, then wrote to sd. I must be doing something wrong creating the sd but I can't find any info as to what. Thanks for any help
Click to expand...
Click to collapse
Are you unzipping the right file? You said something about with stock recovery and without. Those are not image files that can be burned. When you unzip my image zip file, you should end up with a 300MB .img file. That is what you burn with win32diskimager. And take the card out of the PC and put it back in before you try to look at it. And be sure to use an external card reader, not one built into your PC.
Sent from my Nook HD+ using Tapatalk
Thanks Leapinlar. I downloaded your nook color emmc stock recovery zip with and without the cwr. I am using external sd reader. I downloaded and tried cwm-6.0.1.2 bootable sd zip and tried that in the nook and nothing happens. Also tried the 5.5.0.4 version too. I removed the card reader and reinserted it in the pc and when I click on the drive letter it ask me if I want to format it. I used win32diskimager and it said write successful, so I put it in the nook and then plugged nook into computer with the stock usb cable and nothing happens. If I hold the power button down the pc does ding as if when you plug in an external device. I'm either trying to burn the wrong file or I'm not making the bootable. Thank you for your help.
Stjpa said:
Thanks Leapinlar. I downloaded your nook color emmc stock recovery zip with and without the cwr. I am using external sd reader. I downloaded and tried cwm-6.0.1.2 bootable sd zip and tried that in the nook and nothing happens. Also tried the 5.5.0.4 version too. I removed the card reader and reinserted it in the pc and when I click on the drive letter it ask me if I want to format it. I used win32diskimager and it said write successful, so I put it in the nook and then plugged nook into computer with the stock usb cable and nothing happens. If I hold the power button down the pc does ding as if when you plug in an external device. I'm either trying to burn the wrong file or I'm not making the bootable. Thank you for your help.
Click to expand...
Click to collapse
You don't say, but you are unzipping those image files before you burn them, right? Should be 300MB .img file. Other than that just look at my A10 tip in my tips thread and follow exactly.
Sent from my Nook HD+ using Tapatalk
leapinlar said:
You don't say, but you are unzipping those image files before you burn them, right? Should be 300MB .img file. Other than that just look at my A10 tip in my tips thread and follow exactly.
Sent from my Nook HD+ using Tapatalk
Click to expand...
Click to collapse
Yes I did unzip the image file before I burned it. I ended up finding a cwr zip that was for a 4 gig card, probably an older way of doing it, and that worked for some reason. I did use your stock 1.4.3 zip though and all seems well. Your tips page is great, thank you, you're very helpful now I can play around and brick it again with some other stuff.
Hey guys.
I am somewhat a noob. I bought a brand new 8gb nook color from wallmart on black friday. I heard about how you can put CM onto the sd card and boot from that without altering the device itself. I have tried for HOURS to do this. I have looked up COUNTLESS walk throughs and done everything they say, done alternations, and used different cards ranging from 2gb sandisk (class 1?) to 32 gb sandisk this is a class 4. I've used winimage and burned the image to the card, then dragged over cyanogenmod and done this task in countless different ways. Every time I shut down the nook, put in the card, then re-boot, the nook does NOT boot from the card. It boots normal, then I can actually browse the card after it boots up. I have done it EXACTLY how it says here and read tutorials so its not a question of whether or not I have followed standard proceedure. My firmware version is 1.4.3. Ive searched online to this and to no avail. My sister bought the exact same one at the exact same time and it does not boot the sd either. I have done about 8 straight hours of research on this guys, so I'm no pro but I have a basic understanding of how it works now. My questions are this:
1: Did Barns and Noble put restrictions on the newest nook color or on the newest software version? And if so is there a way around this?
and
2: If NOT, is there an alternate way/installation onto the card that I can do (such as an image pre loaded with CM etc.) that I might be able to try instead of the conventional way?
Thanks guys! Sorry for the uber long post : S
ronin8knight said:
Hey guys.
I am somewhat a noob. I bought a brand new 8gb nook color from wallmart on black friday. I heard about how you can put CM onto the sd card and boot from that without altering the device itself. I have tried for HOURS to do this. I have looked up COUNTLESS walk throughs and done everything they say, done alternations, and used different cards ranging from 2gb sandisk (class 1?) to 32 gb sandisk this is a class 4. I've used winimage and burned the image to the card, then dragged over cyanogenmod and done this task in countless different ways. Every time I shut down the nook, put in the card, then re-boot, the nook does NOT boot from the card. It boots normal, then I can actually browse the card after it boots up. I have done it EXACTLY how it says here and read tutorials so its not a question of whether or not I have followed standard proceedure. My firmware version is 1.4.3. Ive searched online to this and to no avail. My sister bought the exact same one at the exact same time and it does not boot the sd either. I have done about 8 straight hours of research on this guys, so I'm no pro but I have a basic understanding of how it works now. My questions are this:
1: Did Barns and Noble put restrictions on the newest nook color or on the newest software version? And if so is there a way around this?
and
2: If NOT, is there an alternate way/installation onto the card that I can do (such as an image pre loaded with CM etc.) that I might be able to try instead of the conventional way?
Thanks guys! Sorry for the uber long post : S
Click to expand...
Click to collapse
No nothing was done by B&N. It is how you are burning the card. It will not boot in the nook unless burned perfectly. Look at my tips thread linked in my signature and read items A9 and A10.
There not any easy was not to use a bootable recovery card. Just keep trying, using different software, different cards, different PC s, different card readers.
Sent from my Nook HD+ using Tapatalk
ronin8knight said:
Hey guys.
I am somewhat a noob. I bought a brand new 8gb nook color from wallmart on black friday. I heard about how you can put CM onto the sd card and boot from that without altering the device itself. I have tried for HOURS to do this. I have looked up COUNTLESS walk throughs and done everything they say, done alternations, and used different cards ranging from 2gb sandisk (class 1?) to 32 gb sandisk this is a class 4. I've used winimage and burned the image to the card, then dragged over cyanogenmod and done this task in countless different ways. Every time I shut down the nook, put in the card, then re-boot, the nook does NOT boot from the card. It boots normal, then I can actually browse the card after it boots up. I have done it EXACTLY how it says here and read tutorials so its not a question of whether or not I have followed standard proceedure. My firmware version is 1.4.3. Ive searched online to this and to no avail. My sister bought the exact same one at the exact same time and it does not boot the sd either. I have done about 8 straight hours of research on this guys, so I'm no pro but I have a basic understanding of how it works now. My questions are this:
1: Did Barns and Noble put restrictions on the newest nook color or on the newest software version? And if so is there a way around this?
and
2: If NOT, is there an alternate way/installation onto the card that I can do (such as an image pre loaded with CM etc.) that I might be able to try instead of the conventional way?
Thanks guys! Sorry for the uber long post : S
Click to expand...
Click to collapse
Use win32diskimager instead and use an external card writer. The image is approximately 300mb with the Rev5 file. Then copy the CM10 and 2021011 GApps zips to SD card. Insert in Nook Color. Wait for setup to finish and shut down. Start Nook. Enjoy.
Hopefully won't get in trouble for making the same topic, but I was told I posted in the wrong section, so...
Anyway, without fully reading or knowing my girlfriends Nook was a color, I tried to downgrade it with the information from the topic '
[Stock Firmware]Restore Barnes & Nobel Nook Tablet 16G 1.4.0 from SDCard'
Like I said, didn't realize she had a color, and it's a 8GB, rather than 16GB.
Now the problem is that it charges but it won't turn on, at all.
I've been searching off and on today looking for ways to fix it but even when I find something links to things I need are dead. Can someone tell me exactly how to fix the Nook so that it can power on, link to me working links of what will fix it? I've hacked my Wii, PSP, so I'm not completely new to rooting.
I was also told I should make a bootable CWM card flash a CM7 ROM, but I'm not quite sure what that means... so if someone could explain?
Much appreciated, thanks.
Leapinjar knows a lot of about the Color and has made a very extensive post about it here:
http://forum.xda-developers.com/showthread.php?t=1621301
I would start with item A10 on that list
xkazaf said:
Hopefully won't get in trouble for making the same topic, but I was told I posted in the wrong section, so...
Anyway, without fully reading or knowing my girlfriends Nook was a color, I tried to downgrade it with the information from the topic '
[Stock Firmware]Restore Barnes & Nobel Nook Tablet 16G 1.4.0 from SDCard'
Like I said, didn't realize she had a color, and it's a 8GB, rather than 16GB.
Now the problem is that it charges but it won't turn on, at all.
I've been searching off and on today looking for ways to fix it but even when I find something links to things I need are dead. Can someone tell me exactly how to fix the Nook so that it can power on, link to me working links of what will fix it? I've hacked my Wii, PSP, so I'm not completely new to rooting.
I was also told I should make a bootable CWM card flash a CM7 ROM, but I'm not quite sure what that means... so if someone could explain?
Much appreciated, thanks.
Click to expand...
Click to collapse
It won't turn on because the boot files are corrupted. As the prior user said go to my tips thread and make a bootable CWM SD per item A10 and then flash the stock ROM from A15.
Sent from my Nook HD+ running CM10 on SD
leapinlar said:
It won't turn on because the boot files are corrupted. As the prior user said go to my tips thread and make a bootable CWM SD per item A10 and then flash the stock ROM from A15.
Sent from my Nook HD+ running CM10 on SD
Click to expand...
Click to collapse
I still can't get anything to work. I'm using a 8GB micro sd card.
I burned the CWM Recovery SD v5.5.0.4 to the sd card using win32 disk imager. I had to expand it, which I used the mini tool like you said too.
I downloaded the stock version 1.4.3 zip and moved it to the sd card. Tried to turn the nook on but nothing.
xkazaf said:
I still can't get anything to work. I'm using a 8GB micro sd card.
I burned the CWM Recovery SD v5.5.0.4 to the sd card using win32 disk imager. I had to expand it, which I used the mini tool like you said too.
I downloaded the stock version 1.4.3 zip and moved it to the sd card. Tried to turn the nook on but nothing.
Click to expand...
Click to collapse
And you are sure it is charged? Put my card in and plug the device into the PC via the charge cable. Let it sit there for quite a while and see if you get any life.
Sent from my Nook HD+ running CM10 on SD
leapinlar said:
And you are sure it is charged? Put my card in and plug the device into the PC via the charge cable. Let it sit there for quite a while and see if you get any life.
Sent from my Nook HD+ running CM10 on SD
Click to expand...
Click to collapse
As far as I know it is. The light is green on the cable, and it was fully charged before I messed it up.
Guys
I have downloaded various times the files needed to burn cm10 on an sd card and tried on 32gb and 2gb cards
and nothing works Now I am downloading everything again from Leapinlar how to links see if that makes any difference, is there a step by step I can check to see if I missed something I actually have A 8gb card with cm7 which I did and it runs flawlessly would like to build a 32gb with cm 10 any help guidance or advice will be highly appreciated must bare in mind you are dealing with a grandfather with not many haircuts left
thanks guys
When you say it does not work, you need to be more specific. You mean you put it in the slot and try to boot and it boots to internal memory? Or something else. Tell us more.
And you say a step by step. Not sure how many more steps you need than what I have in my instructions thread.
Sent from my Nook HD+ running CM10 on Hybrid SD
Cm10
Hi!
Thanks for your response.
Yes I burn the image to the sd card then drag and drop
The other two files cm10 and gapps to the card and it
Boots to Nook, am I missing something or
Am I doing something wrong.thanks in advance
For your help.
guarionexpr said:
Hi!
Thanks for your response.
Yes I burn the image to the sd card then drag and drop
The other two files cm10 and gapps to the card and it
Boots to Nook, am I missing something or
Am I doing something wrong.thanks in advance
For your help.
Click to expand...
Click to collapse
Two questions.
One, are you sure you have a Nook Color rather than a Nook Tablet? The Nook Tablet has a silver bezel. The Nook Color bezel is black. My card will not work on the Tablet.
Two, are you following my advice about how to burn the card. Namely, are you using an external card reader to hold the card? And are you running the Win32diskimager program in administrator mode?
Sent from my Nook HD+ running CM10 on Hybrid SD